JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Oracle Solaris Cluster Error Messages Guide     Oracle Solaris Cluster 4.1
search filter icon
search icon

Document Information

Preface

1.  Introduction

2.  Error Messages

Message IDs 100000-199999

Message IDs 200000-299999

Message IDs 300000-399999

Message IDs 400000-499999

Message IDs 500000-599999

Message IDs 600000-699999

Message IDs 700000-799999

Message IDs 800000-899999

Message IDs 900000-999999

Message IDs 400000–499999

This section contains message IDs 400000–499999.

400164 SCSLM <%s> pool_put_property <%s> error <%s>

Description: Should never occur.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

400579 in libsecurity for program %s (%lu); could not register on any transport in /etc/netconfig

Description: A server (rpc.pmfd, rpc.fed or rgmd) was not able to register with rpcbind and not able to create the "cache" files for any transport. An error message is output to syslog.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

400863 [PID %d] Could not create door : error %s

Description: door_create(3DOOR) failed for the specified reason. The specified program will be terminated.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

400904 fatal: getzoneid() failed. Unable to verify privilege.

Description: The cl_apid was unable to query the zoneid and hence exited prematurely.

Solution: Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing and correcting the problem.

401115 t_rcvudata (recv_request) failed

Description: Call to t_rcvudata() failed. The "t_rcvudata" man page describes possible error codes. ucmmd will exit and the node will abort.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

401190 Monitor check for derby data service successful.

Description: The data service successfully checked that node.

Solution: This message is informational; no user action is needed.

401400 Successfully stopped the application

Description: This message is to inform the administrator that the application was stopped successfully.

Solution: This is an informational message, no user action is needed.

402359 dl_attach: DL_ERROR_ACK access error

Description: Could not attach to the physical device. We are trying to open a fast path to the private transport adapters.

Solution: Reboot of the node might fix the problem

402484 NULL command string passed.

Description: A NULL value was specified for the command argument.

Solution: Specify a non-NULL value for the command string.

402596 cl_execd: fork1 returned %d. Returning %d to cl_execd.

Description: The cl_execd program has encountered a failed fork1(2) system call. The error message indicates the error number of failure.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

402705 validate_common - Home directory %s for the configured Psft_User %s either does not exist or is not a directory

Description: The home directory for the configured Psft_User either does not exist or is not a directory.

Solution: Ensure that home directory for the configured Psft_User exists and has the required profile setup.

402992 Failfast: Destroying failfast unit %s while armed.

Description: The specified failfast unit was destroyed while it was still armed.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

403317 pxvfs:mount(): global mounts are not enabled (need to run "clconfig -g" first)

Description: A global mount command is attempted before the node has initialized the global file system name space. Typically this caused by trying to perform a global mount while the system is booted in single user mode.

Solution: If the system is not at run level 2 or 3, change to run level 2 or 3 using the init(1M) command. Otherwise, check message logs for errors during boot.

403575 set_scproxy_resource - Oracle Grid Infrastructure resource %s is not registered.

Description: The Oracle Grid Infrastructure resource sun.<resource> is not registered.

Solution: You must create the Oracle Grid Infrastructure resource sun.<resource> of type sun.storage_proxy.type, where <resource> represents the Oracle Solaris Cluster SUNW.ScalDeviceGroup resource name. Refer the Oracle Solaris Cluster documentation for information on how to do this.

403701 Shutdown request successfully issued to RAC instance.

Description: The agent successfully issued a shutdown request to the Oracle RAC instance.

Solution: None required. Informational message.

403770 Failed to create CCR table %s.

Description: Failed to create the CCR table.

Solution: Check the syslog for further messages. Determine why the CCR create failed.

403863 validate_zcboot_resource - Oracle Grid Infrastructure type sun.zcboot_proxy.type is not registered.

Description: The Oracle Grid Infrastructure type sun.zcboot_proxy.type is not registered.

Solution: You must create the Oracle Grid Infrastructure type sun.zcboot_proxy.type. Refer to the Oracle Solaris Cluster documentation for information on how to do this.

403891 Error in scha_res_get of extn prop,res:%s, Err: %s

Description: Cannot read the extension property

Solution: Depending on the error, take the appropriate action. Contact your Oracle service provider for available updates or patches.

404309 in libsecurity cred flavor is not AUTH_SYS

Description: A server (rpc.pmfd, rpc.fed or rgmd) refused an rpc connection from a client because because the authorization is not of UNIX type. An error message is output to syslog.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

404500 Probe failed in the prenet start method. ucmm is aborting

Description: The disk set or disk group failed its availability check because the UCMM is aborting.

Solution: This is behavior valid for a node that is aborting. If the node is not aborting, determine whether the SUNW.vucmm_framework resource and either the SUNW.vucmm_svm resource or the SUNW.vucmm_cvm resource are online. Or in legacy mode, determine whether the SUNW.rac_framework resource and either the SUNW.rac_svm resource or the SUNW.rac_cvm resource are online. Contact your authorized Oracle service provider for further assistance in diagnosing the problem.

404866 method_full_name: malloc failed

Description: The rgmd server was not able to create the full name of the method, while trying to connect to the rpc.fed server. This problem can occur if the machine has low memory. An error message is output to syslog.

Solution: Determine if the host is running out of memory. If not save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

404924 validate: there are syntactical errors in the parameterfile %s

Description: The parameter file did not pass ksh -n filename.

Solution: fix the parameter file until it passe ksh -n.

404946 stop_asm - Oracle ASM instance (%s) shutdown abort failed

Description: The Oracle ASM instance failed to shutdown abort.

Solution: Check the syslog for further messages. The Oracle ASM instance will now be killed.

405019 ERROR: Option %s unknown

Description: Unable to process parameters passed to the call back method. This is an internal error.

Solution: Please report this problem.

405201 Validation failed. Resource group property NODELIST must contain only 1 node

Description: The resource being created or modified must belong to a group that can have only one node name in its NODELIST property.

Solution: Specify just one node in the NODELIST property.

405204 Unable to unmount the file systems of zpool " %s ". Retrying...

Description: Self explanatory.

Solution: This is an informational message, no user action is needed.

405395 validate_diskgroup - Oracle ASM diskgroup (%s) is not known within v$asm_diskgroup

Description: SCMSGS The Oracle ASM diskgroup specified with ASM_DISKGROUPS is wrong.

Solution: Ensure the correct Oracle ASM diskgroup was specified within the Oracle Solaris Cluster ASM_DISKGROUPS extension property and that the correct device path is within the Oracle ASM instance system property asm_diskstring.

405588 ERROR: Option %s passed to a script of the telemetry data service is unknown

Description: An unknown option was given to a program or script of the telemetry data service. This should never occur.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

405649 validate: User %s does not exist but it is required

Description: The user with the name $Username does not exist or was not returned by the nameservice.

Solution: set the variable User in the paramter file mentioned in option -N to a of the start, stop and probe command to valid contents.

405790 gethostname() call failed : %s

Description: A call to gethostname() failed.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

405911 Invalid upgrade callback from version manager: version %d.%d is equal to current version

Description: The rgmd received an invalid upgrade callback from the version manager. The rgmd will ignore this callback.

Solution: No user action required. If you were trying to commit an upgrade, and it does not appear to have committed correctly, save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing the problem.

405989 %s can't plumb %s.

Description: This means that the Logical IP address could not be plumbed on an adapter belonging to the named IPMP group.

Solution: There could be other related error messages which might be helpful. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

405996 Cannot create parition link for adapter ${adapter}.

Description: Failed to create partition link for IB adapter.

Solution: This message might indicate an internal error. Contact your authorized Oracle service provider to determine the cause and fix.

406042 Communication module initialization error

Description: Internal error.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

406321 INTERNAL ERROR CMM: Cannot resolve type registry object in local name server.

Description: This is an internal error during node initialization, and the system can not continue.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

406429 Waiting for %s service to be moved into disabled/maintenance state.

Description: The specified SMF service is being moved to disabled/maintenance state.

Solution: This is an informational message. No action is needed.

406610 st_ff_arm failed: %s

Description: The rpc.pmfd server was not able to initialize the failfast mechanism. This happens while the server is starting up, at boot time. The server does not come up, and an error message is output to syslog. The message contains the system error.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

406635 fatal: joiners_run_boot_methods: exiting early because of unexpected exception

Description: The low-level cluster machinery has encountered a fatal error. The rgmd will produce a core file and will cause the node to halt or reboot to avoid the possibility of data corruption.

Solution: Save a copy of the /var/adm/messages files on all nodes, and of the rgmd core file. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

407357 in libsecurity strong UNIX authorization failed

Description: A cluster daemon refused an RPC connection from a client because it failed UNIX authentication. This might happen if a caller program is required to run as superuser or as a specific user ID, and fails to do so; or if the caller is attempting to access an Oracle Solaris Cluster daemon from a remote host, in a case where only local node access is permitted.

Solution: Examine other syslog messages occurring at about the same time to see if the problem can be identified. Check that the clustering software is properly installed, and that no unauthorized user processes are running on the cluster. If these checks cannot explain the error, contact your authorized Oracle service provider to determine whether a workaround or patch is available.

407415 qdmd: Quorum device %s is healthy now.

Description: The quorum device monitoring daemon reports that the indicated quorum device is now healthy after a previous failure.

Solution: No action required.

407452 Oracle Grid Infrastructure resource %s has ACL=%s which is incorrect, owner must equal root.

Description: The Oracle Grid Infrastructure resource ACL attribute value is incorrect.

Solution: You must set the owner of the Oracle Grid Infrastructure resource equal to root. Refer to the Oracle Solaris Cluster documentation for information on how to do this.

407559 Mount options for file system mount point %s configured to zone cluster %s are incorrect: %s.

Description: The information for the specified mount point is incorrect.

Solution: Check the entries and edit them with valid values.

407784 socket: %s

Description: The cl_apid experienced an error while constructing a socket. This error may prohibit event delivery to CRNP clients.

Solution: Examine other syslog messages occurring at about the same time to see if the problem can be identified. Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing and correcting the problem.

408001 validate_common - The PeopleTools user %s does not belong to project %s

Description: The userid for Pstf_User does not belong to the specified project.

Solution: Ensure that the Psft_User userid exists within the project. Check that you have the correct userid and project name.

408148 validate - The Oracle HTTP Server component (%s) named by the value of the COMPONENT_INSTANCE property does not exist.

Description: The Oracle HTTP Server component named by the value of the COMPONENT_INSTANCE property does not exist.

Solution: Check the value of the COMPONENT_INSTANCE property.

408164 Invalid value for property %s.

Description: The cl_apid encountered an invalid property value. If it is trying to start, it will terminate. If it is trying to reload the properties, it will use the old properties instead.

Solution: Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing and correcting the problem.

408214 Failed to create scalable service group %s: %s.

Description: A call to the underlying scalable networking code failed.

Solution: Save a copy of the /var/adm/messages files on all nodes. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

408254 check_dhcp - tftp transfer test generated an error code of (%s)

Description: The tftp transfer exited with a non-zero return code.

Solution: None required. Informational message, an immediate failover is being requested.

408282 clcomm: RT or TS classes not configured

Description: The system requires either real time or time sharing thread scheduling classes for use in user processes. Neither class is available.

Solution: Configure Solaris to support either real time or time sharing or both thread scheduling classes for user processes.

408621 INTERNAL ERROR: stopping_iter_deps_list: invalid dependency type <%d>

Description: A non-fatal internal error has occurred in the rgmd state machine.

Solution: Since this problem might indicate an internal logic error in the rgmd, save a copy of the /var/adm/messages files on all nodes, and the output of clresourcetype show -v, clresourcegroup show -v +, and clresourcegroup status +. Report the problem to your authorized Oracle service provider.

408742 svc_setschedprio: Could not save current scheduling parameters: %s

Description: The server was not able to save the original scheduling mode. The system error message is shown. An error message is output to syslog.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

408757 %s: fsync_core_files: could not get any core file paths: pcorefile error %s, gcorefile error %s, zcorefile error %s

Description: The pmmd was unable to retrieve any core file paths from a contract event. The pmmd will continue to monitor the process, but the pmmd has missed information of interest.

Solution: Search for other syslog error messages on the same node. Save a copy of the /var/adm/messages files on all nodes, and report the problem to your authorized Oracle service provider.

408980 validate_asm - You must set the clustered Oracle ASM ORACLE_SID per_node extension_property for the node that was just added before you bring online the resource group on the newly added node

Description: The Oracle ASM ORACLE_SID per_node extension property needs to be defined.

Solution: When adding a node to the resource group the Oracle ASM ORACLE_SID per_node extension property will be set to the default value, which may not be valid for this deployment. Instead, if you required a different value from the default value you should set the Oracle ASM ORACLE_SID per_node extension property for the newly added node. To set the Oracle ASM ORACLE_SID per_node extension property use the following command replacing <added-node>, <sid> and <resource> as required. clrs set -p 'oracle_sid{<added-node>}'=<sid> <resource>

409230 ct_event_read: %s

Description: The libclcontract code was unable to read the next contract event. It will retry.

Solution: Search for other syslog error messages on the same node. Save a copy of the /var/adm/messages files on all nodes, and report the problem to your authorized Oracle service provider.

409267 Error opening procfs control file (for parent process) <%s> for tag <%s>: %s

Description: The rpc.pmfd server was not able to open the procfs control file for the parent process, and the system error is shown. procfs control files are required in order to monitor user processes.

Solution: Determine if the machine is running out of memory. If this is not the case, save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

409693 Aborting startup: failover of NFS resource groups may be in progress.

Description: Startup of an NFS resource was aborted because a failure was detected by another resource group, which would be in the process of failover.

Solution: Attempt to start the NFS resource after the failover is completed. It may be necessary to start the resource on another node if current node is not healthy.

409751 Validate callback skipped.

Description: This resource will not perform validation checks (during UPDATE of Nodelist) on this node, because the resource that it depends on is not configured on this node.

Solution: None.

409938 Failed to get state of SMF service %s

Description: There was a failure in attempting to determine the state of the SMF service.

Solution: Examine other syslog messages occurring around the same time on the same node, to see if the source of the problem can be identified.

410042 Could not resolve(%s) the fencing lock object in the name server for zone cluster '%s'. This prevents cluster to do proper fencing/unfencing actions on the shared devices/file systems.

Description: There is a problem communicating with the name server to resolve the zone cluster fencing status lock object.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

410176 Failed to register callback for IPMP group %s with tag %s and callback command %s (request failed with %d).

Description: An unexpected error occurred while trying to communicate with the network monitoring daemon (cl_pnmd).

Solution: Make sure the network monitoring daemon (cl_pnmd) is running.

410272 Validate - ORACLE_HOME directory %s does not exist

Description: The Oracle E-Business Suite ORACLE_HOME directory does not exist.

Solution: Check that the correct pathname was entered for the Oracle Home directory when registering the resource and that the directory exists.

411369 Not found clexecd on node %d for %d seconds. Giving up!

Description: Could not find clexecd to execute the program on a node. Indicated giving up after retries.

Solution: This is an informational message, no user action is needed.

411471 Error while initializing XDR stream

Description: An internal error has occurred in the inter-process communication between Oracle Solaris Cluster processes. Related error messages might be found near this one in the syslog output.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

412106 Internal Error. Unable to get fault monitor name

Description: This is an internal error. Could not determine fault monitor program name.

Solution: Please report this problem.

412366 setsid failed: %s

Description: Failed to run the "setsid" command. The "setsid" man page describes possible error codes.

Solution: None. ucmmd will exit.

412451 Incorrect resource group properties for VUCMM framework resource group %s. Value of RG_mode must be Scalable.

Description: The VUCMM framework resource group must be a scalable resource group. The RG_mode property of this resource group must be set to 'scalable'. The VUCMM framework will not function correctly without this value.

Solution: Refer to the Oracle Solaris Cluster documentation for procedures to configure a scalable resource group.

412530 Error: could not start the Derby server because the directory path specified in the resource property DB_path is not valid.

Description: The Derby server could not be started because the path specified in DB_path is not valid.

Solution: Use a valid directory path as the value of the DB_path property.

412533 clcomm: validate_policy: invalid relationship moderate %d low %d pool %d

Description: The system checks the proposed flow control policy parameters at system startup and when processing a change request. The moderate server thread level cannot be less than the low server thread level.

Solution: No user action required.

413485 Validation failed for IPMP group name <%s>: Valid configuration was not found.

Description: An IP address resource(of type LogicalHostname or SharedAddress) has been mis-configured. The indicated IPMP group configuration is invalid. This will cause errors in any attempted operation upon the IP address resource. Additional related failure messages are likely to be found near this one in the syslog output.

Solution: Check the configuration of network resources using the "clresourcegroup show -v +" command, and using ipadm command and make any necessary corrections.

413513 INTERNAL ERROR Failfast: ff_impl_shouldnt_happen.

Description: An internal error has occurred in the failfast software.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

413858 Error in finding the adapter with the MAC address.

Description: No adapter is found with the MAC address.

Solution: This message might indicate an internal error. Contact your authorized Oracle service provider to determine the cause and fix.

413925 in libsecurity ; unable to create door : %s

Description: An Oracle Solaris Cluster daemon was unable to create a door for communication with its clients. A following syslog message provides the name of the daemon that failed. This might cause the node to be rebooted or halted.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

414007 CMM: Placing reservation on quorum device %s failed.

Description: An error was encountered while trying to place a reservation on the specified quorum device, hence this node can not take ownership of this quorum device.

Solution: There might be other related messages on this and other nodes that are connected to this quorum device that might indicate the cause of this problem. Refer to the quorum disk repair section of the administration guide for resolving this problem.

414208 QUORUM_GENERIC: quorum preempt error in CMM: Error %d --- QUORUM_GENERIC Tkown ioctl failed on quorum device %s.

Description: This node encountered an error when issuing a QUORUM_GENERIC Take Ownership operation on a quorum device. This error indicates that the node was unsuccessful in preempting keys from the quorum device, and the partition to which it belongs was preempted. If a cluster is divided into two or more disjoint subclusters, one of these must survive as the operational cluster. The surviving cluster forces the other subclusters to abort by gathering enough votes to grant it majority quorum. This action is called "preemption of the losing subclusters".

Solution: Other related messages identify the quorum device where the error occurred. If an EACCES error occurs, the QUORUM_GENERIC command might have failed because of the SCSI3 keys on the quorum device. Scrub the SCSI3 keys off the quorum device and reboot the preempted nodes.

414431 Unable to create server thread for immediate failfast of zone %s with zone ID %d

Description: A server thread that is needed for failfasting a zone could not be created. This might be due to lack of memory.

Solution: Lack of memory might lead to other problems on the node. You must free up memory on the node.

414680 fatal: register_president: Don't have reference to myself

Description: The low-level cluster machinery has encountered a fatal error. The rgmd will produce a core file and will cause the node to halt or reboot to avoid the possibility of data corruption.

Solution: Save a copy of the /var/adm/messages files on all nodes, and of the rgmd core file. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

414705 RGM unblocked, encountered an exception

Description: The RGM returned from the blocking invocation with an exception. The process that hosts the server object might have terminated. As a result of this, RGM might try to bring the resources online that need global file systems data. The data might not be available yet, which might result in failure to start the resource groups.

Solution: Save a copy of /var/adm/messages, /var/cluster/logs/ql_server_debug.log and /var/cluster/logs/install/ql_upgrade_debug.log on all the nodes. Report the problem to your authorized Oracle service provider.

415055 Error: The Oracle CRS home directory "%s" is invalid.

Description: The CRS_HOME directory is invalid.

Solution: Check that Oracle CRS has been installed properly.

415110 Error: pmfadm could not start fault monitor, tag "%s" error="%s"

Description: The PMF could not start the CRS framework monitor.

Solution: Check for other errors on the system and correct them before restarting the CRS framework resource. If you cannot resolve this problem, contact your Oracle service representative for assistance.

415591 SCSLM fstat <%s> error <%s>

Description: Should never occur.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

415619 srm_function - The user %s does not belongs to project %s

Description: The specified user does not belong to the project defined by Resource_project_name or Rg_project_name.

Solution: Add the user to the defined project in /etc/project.

415736 Failed to retrieve failback value.

Description: Unable to retrieve the failback property value.

Solution: Check the resource group configuration in which this resource is configured. If the problem persists, contact your authorized Oracle service provider with copies of /var/adm/messages files on all nodes.

416483 Failed to retrieve the resource information.

Description: An Oracle Solaris Cluster data service is unable to retrieve the resource information. Low memory or API call failure might be the reasons.

Solution: In case of low memory, the problem will probably cured by rebooting. If the problem recurs, you might need to increase swap space by configuring additional swap devices. Otherwise, if it is API call failure, check the syslog messages from other components.

416930 fatal: %s: internal error: bad state <%d> for resource group <%s>

Description: An internal error has occurred. The rgmd will produce a core file and will force the node to halt or reboot to avoid the possibility of data corruption.

Solution: Save a copy of the /var/adm/messages files on all nodes, and of the rgmd core file(s). Contact your authorized Oracle service provider for assistance in diagnosing the problem.

417144 Must be root to start %s

Description: The program or daemon has been started by someone not in superuser mode.

Solution: Login as root and run the program. If it is a daemon, it may be incorrectly installed. Reinstall cluster packages or contact your service provider.

417481 Adapter %s has not been added persistently to the IPMP group configuration

Description: Validation of IPMP group configuration has failed. The indicated interface has not been added persistently to the IPMP group configuration.

Solution: Examine the IPMP configuration. Make sure that the indicated adapter and other adapters of the group are added persistently to the IPMP group configuration otherwise the configuration won't be available after the reboot.

417740 Unregistered syscall. %s(%d)

Description: An event which was not registered for, has been received. This can happen if the monitored process is simultaneously being controlled by another process, most notably, by a proc tool.

Solution: This is informational. No action is needed.

417835 Failed to read the cz info

Description: The private IP address assigned to a zone was not configured correctly.

Solution: The private IP address assigned to the zone is used for private IP communication for the zone. So, this feature may not work as expected as a result of this error. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

417903 clexecd: waitpid returned %d.

Description: clexecd program has encountered a failed waitpid(2) system call. The error message indicates the error number for the failure.

Solution: clexecd program will exit and node will be halted or rebooted to prevent data corruption. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

418026 check_opmn - Probe command for opmn (%s) timed-out.

Description: The Oracle Process Management and Notification Server probe failed to return within the PROBE_TIMEOUT period.

Solution: Increase the value of the PROBE_TIMEOUT property.

418511 XDR Error while decoding return arguments.

Description: An internal error has occurred in the inter-process communication between Oracle Solaris Cluster processes. Related error messages might be found near this one in the syslog output.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

418772 Unable to post event %lld: %s: Retrying..

Description: The cl_eventd was unable to post an event to the sysevent queue locally, but will retry.

Solution: No action required yet.

418869 clq_scsi3: Error %d from MHIOCGRP_INRESV --- failed to read reservations from quorum device %s.

Description: An error was encountered while trying to read reservations on the specified quorum device.

Solution: There may be other related messages on this and other nodes connected to this quorum device that may indicate the cause of this problem. Refer to the quorum disk repair section of the administration guide for resolving this problem.

418978 Skipping the execution of the boot handler as the zone is coming up as part of physical node boot and the shared qfs file systems will be mounted by RGM.

Description: The handler has detected that this is first boot of the zone.

Solution: This is an informational message; no user action is needed.

418989 Failed to apply the network configuration profile.

Description: Failed to setup network configuration.

Solution: This message indicates an internal error. Contact your authorized Oracle service provider to determine the cause and fix.

419061 getlocalhostname() failed; unable to execute zoneadm reboot for zone %s

Description: The rgmd daemon was unable to obtain the name of the local host, causing a zoneadm reboot invocation to fail. The zone will stay up, but the rgmd will not attempt to start services on it.

Solution: Reboot the zone. Examine other syslog messages occurring at about the same time to see if the problem can be identified. Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing the problem.

419191 %s is not primary on this node

Description: The device group is mastered by some other node of the cluster. Status of a Solaris Volume Manager disk set is available on the master node only. This message is an informational message.

Solution: No user action is required.

419301 The probe command <%s> timed out

Description: Timeout occured when executing the probe command provided by user under the hatimerun(1M) utility.

Solution: This problem might occur when the cluster is under load. Consider increasing the Probe_timeout property.

419529 INTERNAL ERROR CMM: Failure registering callbacks.

Description: An instance of the userland CMM encountered an internal initialization error.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

419733 Database is already stopped.

Description: The database does not need to be stopped.

Solution: This is an informational message, no user action is needed.

419972 clcomm: Adapter %s is faulted

Description: A network adapter has encountered a fault.

Solution: Any interconnect failure should be resolved, and/or a failed node rebooted.

420099 Function: validate - Zonebrand for zone %s is configured as %s. Valid values are native, lx, solaris8, solaris9, solaris10 and solaris.

Description: Currently Zonebrand can only be set to "native", "lx", "solaris8", "solaris9", "solaris10" or "solaris".

Solution: Review the components configuration file and make sure the variable Zonebrand defines either "native", "lx" "solaris8", "solaris9", "solaris10" or "solaris".

420157 INTERNAL ERROR: Could not decode the arguments

Description: Failed to decode the arguments.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

420196 Failed to retrieve private IP address for node %d

Description: Cluster cannot generate a callback for the RDS module. Operation of RDS sockets might be affected.

Solution: If Reliable Datagram Sockets (RDS) is used by applications running on this cluster, contact your Oracle service representative to determine if a workaround or patch is available.

420338 Validate - RUN_MODE has to be server

Description: The DHCP resource requires that that the /etc/inet/dhcpsvc.conf file has RUN_MODE=SERVER.

Solution: Ensure that /etc/inet/dhcpsvc.conf has RUN_MODE=SERVER by configuring DHCP appropriately, i.e. as defined within the Oracle Solaris Cluster Data Service for DHCP.

420573 Error sending signal to contract <%d>: %s

Description: The rpc.pmfd was not able to send the requested signal to the specified contract id.

Solution: If the message is isolated, it was probably a transient error. If you were running pmfadm(1M) directly, retry the requested action. If there are many instances of the message, there is a problem with the contract file system. Search for other syslog error messages on the same node. Save a copy of the /var/adm/messages files on all nodes, and report the problem to your authorized Oracle service provider.

420735 INTERNAL ERROR: Could not encode the arguments

Description: Failed to encode the arguments.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

420763 Switchover (%s) error (%d) after failure to become secondary

Description: The file system specified in the message could not be hosted on the node the message came from.

Solution: Check /var/adm/messages to make sure there were no device errors. If not, contact your authorized Oracle service provider to determine whether a workaround or patch is available.

420823 XDR Error while encoding return arguments.

Description: An internal error has occurred in the inter-process communication between Oracle Solaris Cluster processes. Related error messages might be found near this one in the syslog output.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

421576 Validation failed. PARAMETER_FILE: %s does not exist.

Description: The file that the extension property parameter_file specifies does not exist.

Solution: Check that the extension property parameter_file specifies the correct file name. If the file name is correct, check that the file system where the file resides is accessible. If the file system is accessible, check that the file exists on all nodes where the resource can be brought online. If the file exists on all nodes, check that the access permissions of the file are correct. If the problem persists, contact your Oracle support representative for further assistance.

421944 Could not load transport %s, paths configured with this transport will not come up.

Description: Topology Manager could not load the specified transport module. Paths configured with this transport will not come up.

Solution: Check if the transport modules exist with right permissions in the right directories.

422033 HA: exception %s (major=%d) from stop_receiving_ckpt().

Description: An unexpected return value was encountered when performing an internal operation.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

422190 Failed to reboot node: %s.

Description: HA-NFS fault monitor was attempting to reboot the node, because rpcbind daemon was unresponsive. However, the attempt to reboot the node itself did not succeed.

Solution: Fault monitor would exit once it encounters this error. However, process monitoring facility would restart it (if enough resources are available on the system). If rpcbind remains unresponsive, the fault monitor (restarted by PMF) would again attempt to reboot the node. If this problem persists, reboot the node. Also see message id 804791.

422302 scnas fatal error - Unexpected filer type(%s) in table %s

Description: The program responsible for retrieving NAS configuration information from the CCR has suffered an internal error. Continued errors of this type may lead to a compromise in data integrity.

Solution: Contact your authorized Oracle service provider as soon as possible to determine whether a workaround or patch is available.

422478 Oracle Grid Infrastructure resource %s is not registered.

Description: The Oracle Grid Infrastructure resource sun.<res> is not registered.

Solution: You must create the Oracle Grid Infrastructure resource sun.<res> of type sun.storage_proxy.type, where <res> represents the Oracle Solaris Cluster resource name. Refer the Oracle Solaris Cluster documentation for information on how to do this.

422541 Failed to register with PDTserver

Description: This means that we have lost communication with PDT server. Scalable services will not work any more. Probably, the nodes which are configured to be the primaries and secondaries for the PDT server are down.

Solution: Need to restart any of the nodes which are configured be the primary or secondary for the PDT server.

422561 SCSLM zone <%s> rg_name <%s> not found

Description: Should never occur.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

422570 Probing thread failed to wait on Condition variable : %s

Description: The thread that was created to perform a probe failed.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

422594 Error: The resource property RESOURCE_DEPENDENCIES must contain the "%s" resource.

Description: An attempt was made to create or update a CRS framework resource without specifying a dependency on the RAC framework resource.

Solution: Repeat the attempt to create or update the CRS framework resource, specifying the required dependency on the RAC framework resource.

422628 devfsadm -i did

Description: devfsadm command failed to configure DID devices. This node might face problems with mounting /global/.devices/node@... file systems.

Solution: If this node faces problems with mounting /global/.devices/node@... file systems, run "/usr/sbin/devfsadm -i did" command. If mount problem persists, contact your authorized Oracle service provider for assistance in diagnosing the problem.

423137 A resource restart attempt on resource %s in resource group %s has been blocked because the number of restarts within the past Retry_interval (%d seconds) would exceed Retry_count (%d)

Description: A request to restart a resource is denied because the resource has already been restarted Retry_count times within the past Retry_interval seconds

Solution: No action required. If desired, use clresourcegroup to change the Failover_mode setting.

423704 Validate - DHCP config file %s does not exist

Description: The DHCP resource could not validate that /etc/inet/dhcpsvc.conf exists.

Solution: Ensure that /etc/inet/dhcpsvc.conf exists.

423928 Error reading line %d from stopstate file: %s.

Description: There was an error reading from the stopstate file at the specified line.

Solution: Examine other syslog messages occurring around the same time on the same node, to see if the source of the problem can be identified. Check to see if their is a problem with the stopstate file.

423958 resource group %s state change to unmanaged.

Description: This is a notification from the rgmd that a resource group's state has changed. This message can be used by system monitoring tools.

Solution: This is an informational message; no user action is needed.

424061 Validation failed. ORACLE_HOME %s does not exist

Description: Directory specified as ORACLE_HOME does not exist. ORACLE_HOME property is specified when creating Oracle_server and Oracle_listener resources.

Solution: Specify correct ORACLE_HOME when creating resource. If resource is already created, please update resource property 'ORACLE_HOME'.

424083 Validation failed. Specified DB_NAME %s not registered with CRS

Description: Creation of a resource of type SUNW.scalable_rac_server_proxy failed because the specified DB_NAME %s is not recognized by CRS as a valid RAC database.

Solution: Verify using CRS interfaces whether the specified DB_NAME is valid or not. If the problem persists, contact your Oracle support representative for further assistance.

424683 SCSLM file <%s> is empty

Description: Should never occur.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

424783 pmf_monitor_suspend: PCRUN: %s

Description: The rpc.pmfd server was not able to suspend the monitoring of a process and the monitoring of the process has been aborted. The message contains the system error.

Solution: Save the syslog messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

424816 Unable to set automatic MT mode.

Description: The rpc.pmfd server was not able to set the multi-threaded operation mode. This happens while the server is starting up, at boot time. The server does not come up, and an error message is output to syslog.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

424909 Oracle Grid Infrastructure resource %s has ACTION_SCRIPT=%s which either does not exist or is not executable.

Description: The Oracle Grid Infrastructure resource ACTION_SCRIPT attribute value is incorrect.

Solution: You must set the ACTION_SCRIPT attribute of the Oracle Grid Infrastructure resource equal to <basedir>/SUNWscor/dsconfig/bin/scproxy_crs_action. Note that <basedir> is typically /opt. Refer to the Oracle Solaris Cluster documentation for information on how to do this.

425271 Started the monitor-method successfully

Description: The fault monitor of this resource was started successfully. This message is an informational message.

Solution: No user action is required.

425328 validate: Return String is not set but it is required

Description: -2 The Return string is not set in the parameter file.

Solution: -2 Specify the ReturnString in the parameter file.

425366 check_cmg - FUNDRUN = %s, FNDMAX = %s

Description: While probing the Oracle E-Business Suite concurrent manager, the actual percentage of processes running is below the user defined acceptable limit set by CON_LIMIT when the resource was registered.

Solution: Determine why the number of actual processes for the concurrent manager is below the limit set by CON_LIMIT. The concurrent manager resource will be restarted.

425483 The resource "%s" cannot be added while the VUCMMD is running.

Description: An attempt was made to add a resource to the VUCMM framework resource group while the VUCMM is running.

Solution: Bring the VUCMM framework resource group to an unmanaged state, reboot the cluster, and repeat the attempt to add a resource.

425551 getnetconfigent (open_cmd_port) failed

Description: Call to getnetconfigent failed and ucmmd could not get network information. ucmmd will exit and the node will abort.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

425618 Failed to send ICMP packet: %s

Description: There was a problem in sending an ICMP packet over a raw socket.

Solution: If the error message string thats logged in this message does not offer any hint as to what the problem could be, contact your authorized Oracle service provider.

426221 CMM: Reservation key changed from %s to %s for node %s (id = %d).

Description: The reservation key for the specified node was changed. This can only happen due to the CCR infrastructure being changed by hand, which is not a supported operation. The system can not continue, and the node will panic.

Solution: Boot the node in non-cluster (-x) mode, recover a good copy of the file /etc/cluster/ccr/infrastructure from one of the cluster nodes or from backup, and then boot this node back in cluster mode. If all nodes in the cluster exhibit this problem, then boot them all in non-cluster mode, make sure that the infrastructure files are the same on all of them, and boot them back in cluster mode. The problem should not happen again.

426721 Diskgroup (%s) could not be found!

Description: The disk set or disk group that is being validated was not found.

Solution: Determine whether the disk set or disk group was removed. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

426827 reservation error(%s) - Unable to gain access to device '%s', errno %d

Description: The device fencing program has encountered errors while trying to access a device.

Solution: Another cluster node has fenced this node from the specified device, preventing this node from accessing that device. Access should have been reacquired when this node joined the cluster, but this must have experienced problems. If the message specifies the 'node_join' transition, this node will be unable to access the specified device. If the failure occurred during the 'make_primary' transition, then this will be unable to access the specified device and a device group that contains the specified device might have failed to start on this node. An attempt can be made to acquire access to the device by executing '/usr/cluster/lib/sc/run_reserve -c node_join' on this node. If a device group failed to start on this node, the cldevicegroup command can be used to start the device group on this node if access can be reacquired. If the problem persists, contact your authorized Oracle service provider to determine whether a workaround or patch is available.

427250 Membership: Unable to create membership threadpool.

Description: The membership threadpool could not be created. This might be due to lack of memory.

Solution: Lack of memory might lead to other problems on the node. You must free up memory on the node.

427346 check_mysql_slave - MySQL slave instance %s is not connected to master %s with MySql error (%s)

Description: The faultmonitor has detected that the MySQL slave instance is not connected to the specified master.

Solution: Check MySQL logfiles to determine why the slave has been disconnected to the master.

427391 Function: validate: The Instance_name property is empty

Description: The instance_name property must be set.

Solution: Specify a valid SAP instance name.

427694 The pool '%s' failed to import using cachefile %s.

Description: HAStoragePlus failed to import the specified ZFS pool.

Solution: Check the error messages realted to specified pool in the log message to determine the failure. Re-try the operation after rectifying the problem. If the problem persists contact your authorized Oracle service provider.

427984 Completed verification of SUNW.qfs resources metadata server status.

Description: This is a notification from the handler that it has completed verification of metadata servers status of SUNW.qfs resources.

Solution: This is an informational message; no user action is needed.

428036 Function: validate - %s state is %

Description: The SMF service state is not installed or ready.

Solution: If the SMF service is required to be managed by the Oracle Solaris Cluster the SMF satte must be either installed or ready.

428115 Failed to open SAM-FS volume file %s: %s.

Description: HAStoragePlus was not able to open the specified volume that is part of the SAM-FS file system.

Solution: Check the SAM-FS file system configuration. If the problem persists, contact your authorized Oracle service provider.

428367 QUORUM_GENERIC: quorum_reserve error: writing reservation key on quorum device %s failed with error code %d.

Description: An error was encountered when reserving the specified quorum device. The reservation key could not be written on the quorum device. This error occurs because of unexpected behavior from the device driver, the multipathing driver, or the device's firmware.

Solution: Contact your authorized Oracle service provider to determine if a workaround or patch is available.

429203 Exceeded Monitor_retry_count: Fault monitor for resource %s failed to stay up.

Description: Resource fault monitor failed to start after Monitor_retry_count number of attempts. The resource will not be monitored.

Solution: Examine log files and syslog messages to determine the cause of the failure. Take corrective action based on any related messages. If the problem persists, report it to your Sun support representative for further assistance.

429368 CMM: sector read for validation failed after write, error code %d

Description: After writing to a sector, an attempt to read the sector for validation of the Persistent Group Reservation Emulation (PGRE) ID string failed. The error could be either in the driver or the hardware.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available for this driver/hardware error.

429549 reservation warning(%s) - MHIOCGRP_REGISTERANDIGNOREKEY error(%d) will retry in %d seconds

Description: The device fencing program has encountered errors while trying to access a device. The failed operation will be retried

Solution: This is an informational message, no user action is needed.

429594 The file system mount point %s information is missing from the /etc/vfstab file of the global zone. This file system could be original file system for the lofs file system with mount point %s configured to zone cluster %s. OR The global cluster resource '%s' is managing the file system which may contain the directory '%s'. If this current resource is intended for sharing '%s' the current resource need to have dependency on the global cluster resource '%s' and current resource's resource group must have strong affinity on global cluster resource's resource group.

Description: HAStoragePlus failed to find the specified entry in the vfstab, or the resource has not met configuration requirements to share the directory with the zone cluster.

Solution: Update the vfstab entry or specify the shared directory configuration requirements and retry the operation.

429663 Node %s not in list of configured nodes

Description: The specified scalable service could not be started on this node because the node is not in the list of configured nodes for this particluar service.

Solution: If the specified service needs to be started on this node, use clresourcegroup to add the node to the list of configured nodes for this service and then restart the service.

429962 Successfully unmounted %s.

Description: HAStoragePlus successfully mounted the specified file system.

Solution: This is an informational message, no user action is needed.

430055 CCR: Can't access cluster %s table %s on node %s errno = %d.

Description: The indicated error occurred when CCR was tried to access the indicated table on the nodes in the cluster. The errno value indicates the nature of the problem. errno values are defined in the file /usr/include/sys/errno.h. An errno value of 28(ENOSPC) indicates that the root files system on the node is full. Other values of errno can be returned when the root disk has failed(EIO).

Solution: There may be other related messages on the node where the failure occurred. They may help diagnose the problem. If the root file system is full on the node, then free up some space by removing unnecessary files. If the root disk on the afflicted node has failed, then it needs to be replaced. If the indicated table was accidently removed, boot the indicated node in -x mode to restore the indicated table from backup. The CCR tables are located at /etc/cluster/ccr/.

430296 Starting Proxy monitor. pmf tag %s

Description: The agent is attempting to startup the Monitor of a resource of type SUNW.scalable_rac_server_proxy.

Solution: None required. Informational message.

430445 Monitor initialization error. Incorrect arguments

Description: Error occured in monitor initialization. Arguments passed to the monitor by callback methods were incorrect.

Solution: This is an internal error. Disable the monitor and report the problem.

431018 fork1 returned %d while creating daemon. Exiting.

Description: The cl_execd program has encountered a failed fork1(2) system call. The error message indicates the error number of failure.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

431252 scha_resourcegroup_open_zone() failed to obtain handle for existing resource group '%s': %s

Description: Failed to obtain the handle of existing resource group.

Solution: Check the syslog messages around the time of the error for messages indicating the cause of the failure. If this error persists, contact your authorized Oracle service provider to determine whether a workaround or patch is available.

431445 run_query_device: path = %s, mutex_init() return %d

Description: Self explanatory.

Solution: No action required.

431650 User %s does not exist

Description: The User list operation failed for broker_user.

Solution: Check the syslog and /var/adm/messages for more details.

432222 %s is not a valid IPMP group name on this node.

Description: Validation of the adapter information has failed. The specified IPMP group does not exist on this node.

Solution: Create appropriate IPMP group on this node or recreate the logical host with correct IPMP group.

432239 The RGM isn't failing resource group <%s> off of node <%s>, because there are no other current or potential masters; will attempt restart.

Description: A scha_control(1HA,3HA) GIVEOVER attempt failed because no candidate node was healthy enough to host the resource group, and the resource group was not currently mastered by any other node. The resource group will be restarted on its current master, which in some cases may be sufficient to restore availability. However, only one such restart is executed within Pingpong_interval seconds, where Pingpong_interval is a user-configurable property of the resource group. The default value of Pingpong_interval is 3600 seconds. For more information, see 'Pingpong_interval' in the rg_properties(5) man page.

Solution: Examine other syslog messages on all cluster members that occurred about the same time as this message, to see why other candidate nodes were not healthy enough to master the resource group. Note: A properly-implemented resource monitor, upon encountering the failure of a scha_control GIVEOVER call, will sleep for awhile and restart its probes. If the original error condition is temporary, later probes will succeed and the resource can continue providing service on its current master. If probe failures continue to occur on this node, the scha_control GIVEOVER will be re-attempted and might then succeed in relocating the resource group to a new master. In these cases, no user action is required.

432327 dpm_timeout_io: path = %s, sema_post() return %d

Description: Self explanatory.

Solution: No action required.

432473 reservation fatal error(%s) - joining_node not specified

Description: The device fencing program has suffered an internal error.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available. Copies of /var/adm/messages from all nodes should be provided for diagnosis. It may be possible to retry the failed operation, depending on the nature of the error. If the message specifies the 'node_join' transition, then this node may be unable to access shared devices. If the failure occurred during the 'release_shared_scsi2' transition, then a node which was joining the cluster may be unable to access shared devices. In either case, it may be possible to reacquire access to shared devices by executing '/usr/cluster/lib/sc/run_reserve -c node_join' on all cluster nodes. If the failure occurred during the 'make_primary' transition, then a device group has failed to start on this node. If another node was available to host the device group, then it should have been started on that node. If desired, it might be possible to switch the device group to this node by using the cldevicegroup command. If no other node was available, then the device group will not have been started. You can use the cldevicegroup command to retry the attempt to start the device group. If the failure occurred during the 'primary_to_secondary' transition, then the shutdown or switchover of a device group has failed. The desired action may be retried.

432951 %s is not a directory.

Description: The path listed in the message is not a directory.

Solution: Specify a directory path for the extension property.

432987 Failed to retrieve nodeid.

Description: Data service is failed to retrieve the host information.

Solution: If the logical host and shared address entries are specified in the /etc/inet/hosts file, check these entries are correct. If this is not the reason then check the health of the name server. For more error information, check the syslog messages.

433438 Setup error. SUPPORT_FILE %s does not exist

Description: This is an internal error. Support file is used by HA-Oracle to determine the fault monitor information.

Solution: Please report this problem.

433501 fatal: priocntl: %s (UNIX error %d)

Description: The daemon indicated in the message tag (rgmd or ucmmd) has encountered a failed system call to priocntl(2). The error message indicates the reason for the failure. The daemon will produce a core file and will force the node to halt or reboot to avoid the possibility of data corruption.

Solution: If the error message is not self-explanatory, save a copy of the /var/adm/messages files on all nodes, and of the core file generated by the daemon. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

433895 INTERNAL ERROR: Invalid resource property tunable flag <%d> for property <%s>; aborting node

Description: An internal error occurred in the rgmd while checking whether a resource property could be modified. The rgmd will produce a core file and will force the node to halt or reboot.

Solution: Look for other syslog error messages on the same node. Save a copy of the /var/adm/messages files on all nodes, and report the problem to your authorized Oracle service provider.

434097 dpm_device_io: path = %s, mutex_lock() return %d

Description: Self explanatory.

Solution: No action required.

434163 validate_asm - You must set the single instance Oracle ASM ORACLE_SID per_node extension_property for the node that was just added before you bring online the resource group on the newly added node

Description: The Oracle ASM ORACLE_SID per_node extension property needs to be defined.

Solution: When adding a node to the resource group the Oracle ASM ORACLE_SID per_node extension property will be set to the default value, which may not be valid for this deployment. Instead, if you required a different value from the default value you should set the Oracle ASM ORACLE_SID per_node extension property for the newly added node. To set the Oracle ASM ORACLE_SID per_node extension property use the following command replacing <added-node>, <sid> and <resource> as required. clrs set -p 'oracle_sid{<added-node>}'=<sid> <resource>

434318 %s: thr_sigsetmask returned %d. Exiting.

Description: Internal error.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

434480 CCR: CCR data server not found.

Description: The CCR data server could not be found in the local name server.

Solution: Reboot the node. Also contact your authorized Oracle service provider to determine whether a workaround or patch is available.

434640 All remote database nodes are down, requesting a PMF restart.

Description: All remote database nodes are down. Requesting a PMF restart to prevent the client (OracleExternalProxy) from waiting for tcp_ip_abort_cinterval to timeout.

Solution: None. A PMF restart will be performed and you can ignore the error message.

435018 could not detach doorfile %s : %s

Description: The proxy event listener daemon could not detach the door server file because fdetach(3C) failed for the specified reason.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

435295 Unable to create thread, errno = %d. Exiting\n.

Description: The rtreg server program encountered a failure while executing thr_create(3C).

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

435895 Found another active instance of cl_execd. Exiting cl_execd.

Description: The cl_execd program found another active cl_execd program already in execution.

Solution: This is an information message. No user action is required.

435929 Validation failed. Resource group property RG_AFFINITIES should specify affinities only on SCALABLE resource groups.

Description: The resource group should have affinities only on resource groups that are of type SCALABLE.

Solution: Specify only SCALABLE resource groups in the RG_AFFINITIES property of the resource group that is to contain the proxy resource.

435944 Error: could not start the Derby server, check whether the port specified in the resource property DB_port is already used.

Description: The Derby server could not be started probably because the port specified in DB_port is already used.

Solution: Check the resource property DB_port of the Derby data service and try to use another port number.

436058 There might be still metadata server of configured SUNW.qfs resources running on this node which can prevent the sQFS file systems to be unmounted by Solaris during zone halt. Zone halt operation is not successful.

Description: The zone halt handler failed to complete its action successfully.

Solution: Check for the system and zone halt logs to analyze the problem. After rectifying the problem try halting the node. If the problem still persists contact your authorized Oracle service provider with a copy of /var/adm/messages files on all nodes.

436386 Failed to open resource %s: %s. Restarting service.

Description: The PMF action script supplied by the DSDL could not retrieve information about the given resource. The PMF action script has restarted the application.

Solution: Check the syslog messages around the time of the error for messages indicating the cause of the failure. If this error persists, contact your authorized Oracle service provider for assistance in diagnosing and correcting the problem.

436611 cm_getstate() failed

Description: An error prevented the state of the UCMM from being retrieved.

Solution: Contact your authorized Oracle service provider for assistance in diagnosing the problem.

437100 Validation failed. Invalid command line parameter %s %s

Description: Unable to process parameters passed to the call back method. This is an internal error.

Solution: Please report this problem.

437350 File system associated with mount point %s is to be locally mounted. Local file systems cannot be specified with scalable service resources.

Description: HAStoragePlus detected an inconsistency in its configuration: the resource group has been specified as scalable, hence local file systems cannot be specified in the FilesystemMountPoints extension property.

Solution: Correct either the resource group type or remove the local file system from the FilesystemMountPoints extension property.

437834 stat of share path %s failed: %s.

Description: HA-NFS fault monitor reports a probe failure on a specified file system.

Solution: Make sure the specified path exists.

437850 in libsecurity for program %s (%lu); svc_reg failed for transport %s. Remote clients won't be able to connect

Description: A server (rpc.pmfd, rpc.fed or rgmd) was not able to register with rpcbind. The server should still be able to receive requests from clients using the "cache" files under /var/run/scrpc/ but remote clients won't be able to connect. An error message is output to syslog.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

437950 Global service %s associated with path %s is found to be unavailable: %s.

Description: The DCS reported that the specified global service was unavailable.

Solution: Check the device links (SCSI, Fiberchannel, etc.) cables.

438175 HA: exception %s (major=%d) from start_receiving_ckpt().

Description: An unexpected return value was encountered when performing an internal operation.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

438420 Interface %s is plumbed but is not suitable for global networking.

Description: The specified adapter may be either point to point adapter or loopback adapter which is not suitable for global networking.

Solution: Reconfigure the appropriate IPMP group to exclude this adapter.

438615 Unable to create the lock file for DID reloader

Description: The DID reloader daemon cannot be started because the file /var/run/did_reloader.lock cannot be created.

Solution: Check file and directory permissions.

438639 Zone cluster %s is not configured to run on node %s

Description: The PNM proxy subsystem is called on a physical node for a zone cluster that is not configured to run on that node.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

438700 Some ip addresses might still be on loopback.

Description: Some of the ip addresses managed by the specified SharedAddress resource were not removed from the loopback interface.

Solution: Use the ifconfig command to make sure that the ip addresses being managed by the SharedAddress implementation are present either on the loopback interface or on a physical adapter. If they are present on both, use ifconfig to delete them from the loopback interface. Then use clresourcegroup to move the resource group that contains the SharedAddresses to another node to make sure that the resource group can be switched over successfully.

438866 sysinfo in getlocalhostname failed

Description: sysinfo call did not succeed. The "sysinfo" man page describes possible error codes.

Solution: This is an internal error. Please report this problem.

438904 dpm_device_io: path = %s, cond_destroy() return %d

Description: Self explanatory.

Solution: No action required.

439414 oep_validate - /var/cluster/scoep_key does not exist

Description: /var/cluster/scoep_key does not exist.

Solution: Ensure that /var/cluster/scoep_key exists. Refer to the Oracle Solaris Cluster for Oracle External Proxy Data Service document for more information. Otherwise, contact Oracle support services for further assistance.

439933 monitor_check: call to rpc.fed failed for resource <%s>, resource group <%s>, node <%s>, method <%s>

Description: A scha_control(1HA,3HA) GIVEOVER attempt failed, due to a failure of the rgmd to communicate with the rpc.fed daemon. If the rpc.fed process died, this might lead to a subsequent reboot of the node. Otherwise, this will prevent a resource group on the local node from failing over to an alternate primary node

Solution: Examine other syslog messages occurring at about the same time to see if the problem can be identified and if it recurs. Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance.

440309 Creation of the %s directory failed.

Description: The mkdir(1) command has returned an error.

Solution: Investigate the cause of the failure and correct the condition prior to attempting this operation again.

440406 Cannot check online status. Server processes are running.

Description: HA-Oracle could not check online status of Oracle server. Oracle server processes are running but Oracle server may or may not be online yet.

Solution: Examine 'Connect_string' property of the resource. Make sure that user id and password specified in connect string are correct and permissions are granted to user for connecting to the server.

440499 syncsa_serverd unable to register for upgrade callbacks with version manager: %s

Description: An exception was raised when syncsa_server tried to register for upgrade callbacks with the Version Manager.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

440530 Started the fault monitor.

Description: The fault monitor for this data service was started successfully.

Solution: No action needed.

441578 fencing error(%s): failed(%d) to release fencing lock for '%s'.

Description: The zone cluster fencing program has suffered an internal error.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available. Copies of /var/adm/messages from all nodes should be provided for diagnosis.

441874 Ignoring %s set in environment file %s

Description: HA-Oracle methods read the file specified by the USER_ENV property and set the environment variables declared in this file. If an entry in the file specified by the USER_ENV property tries to set a critical environment variable, that entry is ignored.

Solution: Check USER_ENV and remove any entries which attempt to set the environment variable specified in the error message.

442053 clcomm: Invalid path_manager client_type (%d)

Description: The system attempted to add a client of unknown type to the set of path manager clients.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

442846 in libsecurity for program %s ; creat of file %s failed: %s

Description: An Oracle Solaris Cluster daemon was unable to create a door descriptor for communication with its clients. A following syslog message provides the name of the daemon that failed. This might cause the node to be rebooted or halted.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

442855 Function: validate: ID is not numeric or 0

Description: In the parameter file, there is a non numeric character in the value for the ID variable.

Solution: Fix the ID variable in the parameter file.

442862 scha_cluster_open() failed: %s

Description: A call to scha_cluster_open() failed.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

443010 WARNING !!! Current node is hosting the MDS Resource %s, file-system %s has been left in mounted-state...

Description: An attempt to unmount a shared QFS file system failed because the current node is hosting the metadata server resource for the file system. The attempt to unmount the file system occurred because the ScalMountPoint resource was going offline on the current node.

Solution: Manually switch over the metadata resource to another suitable node and unmount the shared QFS file system.

443271 clcomm: Pathend: Aborting node because %s for %u ms

Description: The pathend aborted the node for the specified reason.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

443322 Failed to retrieve MountOptions property: %s

Description: There was an error retrieving a resource property.

Solution: Investigate possible RGM, DSDL errors. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

443542 repl_check fatal error - could not load DID repl list

Description: An error was encountered while checking for replicated device groups.

Solution: Replicated device groups may not have properly started on this node. If so, you may manually configure this node as the replication master and attempt to restart the device group on this node. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

443746 resource %s state on node %s change to %s

Description: This is a notification from the rgmd that a resource's state has changed. This may be used by system monitoring tools.

Solution: This is an informational message; no user action is needed. In a non-debug build, RGM syslogs internal Resource States at a lower priority (LOG_DEBUG) level.

444001 %s: Call failed, return code=%d

Description: A client was not able to make an RPC or door connection to a server (rpc.pmfd, rpc.fed or rgmd) to execute the action shown. The error number is shown.

Solution: Examine other syslog messages occurring at about the same time to see if the problem can be identified. Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

444019 validate_ps_mach - The value for PS_MACH %s (%s) does not match any IP address for any logical host this resource depends on

Description: The value for PS_MACH, reported by psadmin -env, does not match any IP address configured by a logical host, which this resource depends on.

Solution: Ensure that LD_PRELOAD with libschost.so.1(1) and SC_LHOSTNAME are properly configured and set up in the profile for user Psft_user, before psadmin is used to configure the PeopleSoft Enterprise server domain. Verify that the logical hostname resource specified within SC_LHOSTNAME is configured as a dependency for this resource.

444144 clcomm: Cannot change increment

Description: An attempt was made to change the flow control policy parameter that specifies the thread increment level. The flow control system uses this parameter to set the number of threads that are acted upon at one time. This value currently cannot be changed.

Solution: No user action required.

444161 dl_attach: DLPI error %u

Description: Could not attach to the physical device. We are trying to open a fast path to the private transport adapters.

Solution: Reboot of the node might fix the problem.

444273 start_asm - Oracle ASM instance (%s) is already running

Description: The Oracle ASM instance is already running.

Solution: None required. Informational message.

444335 Could not allocate memory, size = %d

Description: Could not allocate memory, PNM proxy program will exit.

Solution: The system is running low on memory. Free up resources so that sufficient memory is available.

444449 move_and_reload_opmn_xml_file - Failed to replace the %s file with an updated version.

Description: Failed to replace the opmn.xml file with an updated version.

Solution: None. If the problem continues, please contact your Oracle support representative.

444479 Unable to allocate memory in sc delegated service_mgmt

Description: Problem in creating memory space during service management of SMF delegated restarter

Solution: Check the system memory usage

445708 Membership: Could not create state machine thread for membership (%s).

Description: A thread required for membership could not be created. This might be due to lack of memory.

Solution: Lack of memory might lead to other problems on the node. You must free up memory on the node.

445855 Switchover error (%s): failed to fsck disk

Description: The file system specified in the message could not be hosted on the node the message came from because an fsck on the file system revealed errors.

Solution: Unmount the PXFS file system (if mounted), fsck the device, and then mount the PXFS file system again.

446027 UNRECOVERABLE ERROR: Oracle Solaris Cluster boot: /usr/cluster/lib/sc/cl_execd not found

Description: /usr/cluster/lib/sc/cl_execd is missing.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

446068 CMM: Node %s (nodeid = %ld) is down.

Description: The specified node has gone down in that communication with it has been lost.

Solution: The cause of the failure should be resolved and the node should be rebooted if node failure is unexpected.

446650 SCSLM cannot modify pset <%s%s> to min=%u,max=%u

Description: Requested number of cpus cannot be set for this resource group on this node.

Solution: Switch the resource group on a node with enough cpus or lower RG_SLM_CPU_SHARES andor RG_SLM_PSET_MIN properties values or move RG_SLM_type to manual and restart the resource group.

446764 SCSLM lseek <%s> off is 0

Description: Should never occur.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

446827 fatal: cannot create thread to notify President of status changes

Description: The rgmd daemon was unable to create a thread upon starting up. This is a fatal error. The rgmd will produce a core file and will force the node to halt or reboot to avoid the possibility of data corruption.

Solution: Make sure that the hardware configuration meets documented minimum requirements. Save a copy of the /var/adm/messages files on all nodes, and of the rgmd core file. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

446967 Stopping Proxy monitor using pmfadm tag %s

Description: The agent is attempting to stop the Monitor of a resource of type SUNW.scalable_rac_server_proxy.

Solution: None required. Informational message.

447095 oep_validate - warning /var/cluster/scoep_key is not a root read-only file

Description: /var/cluster/scoep_key is not a root read-only file.

Solution: Change the file ownership of /var/cluster/scoep_key to root and permissions to 0400.

447182 start_asm - Oracle ASM instance (%s) failed to start

Description: SCMSGS Oracle ASM instance failed to start.

Solution: Check the syslog for further messages. If possible the Oracle ASM instance will be restart by Solaris Cluter.

447268 Proxy Daemon failed to start.

Description: The Monitor of the SUNW.scalable_rac_server_proxy resource failed to startup.

Solution: Try disabling the resource on the failed node. This will lead to a STOP_FAILED condition for that RAC instance resource. Try enabling the resource again. If the problem persists, contact your Oracle support representative for further assistance.

447417 call get_dpm_global with an invalid argument

Description: Internal error.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

447451 Not attempting to start resource group <%s> on node <%s> because this resource group has already failed to start on this node %d or more times in the past %d seconds

Description: The rgmd is preventing "ping-pong" failover of the resource group, i.e., repeated failover of the resource group between two or more nodes.

Solution: The time interval in seconds that is mentioned in the message can be adjusted by using clresourcegroup to set the Pingpong_interval property of the resource group.

447465 call set_dpm_global with an invalid argument

Description: Internal error.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

447578 Duplicated installed nodename when Resource Type <%s> is added.

Description: User has defined duplicated installed node name when creating resource type.

Solution: Recheck the installed nodename list and make sure there is no nodename duplication.

447846 Invalid registration operation

Description: The cl_apid experienced an internal error that prevented proper registration of a CRNP client.

Solution: Examine other syslog messages occurring at about the same time to see if the problem can be identified. Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing and correcting the problem.

447872 fatal: Unable to reserve %d MBytes of swap space; exiting

Description: The rgmd daemon was unable to allocate a sufficient amount of memory upon starting up. This is a fatal error. The rgmd will produce a core file and will force the node to halt or reboot to avoid the possibility of data corruption.

Solution: Make sure that the hardware configuration meets documented minimum requirements. Save a copy of the /var/adm/messages files on all nodes, and of the rgmd core file. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

448046 Unable to open /dev/did/admin

Description: The DID reloader daemon could operate on DID devices.

Solution: Check whether the node is in cluster mode and CCR is valid.

448079 Dataguard_role is IN_TRANSITION. Switchover may be in progress. Instance will not be started.

Description: The administrator has set the 'dataguard_role' resource property to indicate that role switchover operation is in progress outside Oracle Solaris Cluster control. This resource will not be started.

Solution: If this property is incorrectly set, please set the correct value of 'dataguard_role' and restart the resource.

448487 Could not determine the version of weblogic server

Description: An error occured while retrieving the version of weblogic server from the registry file.

Solution: No action required.

448552 run_srvctl - Oracle srvctl command %s timed-out

Description: The Oracle srvctl command timed-out.

Solution: Increase the Start_timeout or Stop_timeout.

448703 clcomm: validate_policy: high too small. high %d low %d nodes %d pool %d

Description: The system checks the proposed flow control policy parameters at system startup and when processing a change request. The high server thread level must be large enough to grant the low number of threads to all of the nodes identified in the message for a fixed size resource pool.

Solution: No user action required.

448821 Function: check_repenqpre: Call a giveover of resource %s to preempt the replicated enqueue service

Description: Execute a giveover for the replicated enqueue resource group.

Solution: None.

448844 clcomm: inbound_invo::done: state is 0x%x

Description: The internal state describing the server side of a remote invocation is invalid when the invocation completes server side processing.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

449159 clconf: No valid quorum_vote field for node %u

Description: Found the quorum vote field being incorrect while converting the quorum configuration information into quorum table.

Solution: Check the quorum configuration information.

449288 setgid: %s

Description: The rpc.pmfd server was not able to set the group id of a process. The message contains the system error. The server does not perform the action requested by the client, and an error message is output to syslog.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

449336 setsid: %s

Description: The cl_apid was not able to set the session id, and the system error is shown. An error message is output to syslog.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

449344 setuid: %s

Description: The rpc.pmfd server was not able to set the user id of a process. The message contains the system error. The server does not perform the action requested by the client, and an error message is output to syslog.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

449424 Waiting for the SUNW.qfs resource group '%s' to reach stable state.

Description: This is a notification from the handler mentioning about the expected state of resource group.

Solution: This is an informational message; no user action is needed.

449661 No permission for owner to write %s.

Description: The owner of the file does not have write permission on it.

Solution: Set the permissions on the file so the owner can write it.

449731 asmdg_proxy_daemon - restarting to include the new Proxy_probe_interval (%s)

Description: Restarting as the Proxy_probe_interval has changed.

Solution: None required. The ASM proxy daemon will be restarted to ensure the new Proxy_probe_interval value is used.

450032 SCSLM <%s> pool_resource_destroy error <%s>

Description: Should never occur.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

450215 Failed to retrieve the zone cluster node '%s' status on this physical node : %s.

Description: Failed to retrieve the status of specfified zone cluster node.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

450412 Unable to determine resource group status.

Description: A critical method was unable to determine the status of the specified resource group.

Solution: Please examine other messages in the /var/adm/messages file to determine the cause of this problem. Also verify if the resource group is available or not. If not available, start the service or resource and retry the operation which failed.

450579 door_call: %s; will retry

Description: The door_call failed with the specified reason.

Solution: No action necessary.

451010 INTERNAL ERROR: stopping_iter_deps_list: meth type <%d>

Description: A non-fatal internal error has occurred in the rgmd state machine.

Solution: Since this problem might indicate an internal logic error in the rgmd, save a copy of the /var/adm/messages files on all nodes, and the output of clresourcetype show -v, clresourcegroup show -v +, and clresourcegroup status +. Report the problem to your authorized Oracle service provider.

451115 ucmmd is already running.

Description: This is informational message.

Solution: None.

451541 clq_scsi3: Failed to scrub key %llx (error = %d) for quorum device %s

Description: Failed to scrub keys for the specified quorum device. This is unexpected behavior from the device driver, multipathing driver or device firmware.

Solution: Use a different device as a quorum device.

451699 No reference to remote node %d, not forwarding event %lld

Description: The cl_eventd cannot forward the specified event to the specified node because it has no reference to the remote node.

Solution: This message is informational only, and does not require user action.

451793 Class<%s> SubClass<%s> Pid<%d> Pub<%s> Seq<%lld> Len<%d>

Description: The cl_eventd received the specified event.

Solution: This message is informational only, and does not require user action.

452059 vucmmd is already running.

Description: This is informational message.

Solution: None.

452202 clcomm: sdoor_sendstream::send

Description: This operation should never occur.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

452205 Failed to form the %s command.

Description: The method searches the commands input to the Agent Builder for the occurence of specific Builder defined variables, e.g. $hostnames, and replaces them with appropriate value. This action failed.

Solution: Check syslog messages and correct the problems specified in prior syslog messages. If the error still persists, report this problem.

452302 Validation failed. Resource property RESOURCE_DEPENDENCIES should contain at least the RAC framework resource of type SUNW.rac_framework or SUNW.rac_framework:*

Description: The resource being created or modified must be dependent upon the RAC framework resource.

Solution: Update the RESOURCE_DEPENDENCIES property to include the RAC framework resource.

452366 The resource '%s' is at resourcetype version '%d' that does not support zones.

Description: The specific resource is at resourcetype version where there is no zones support.

Solution: Upgrade the resource to latest resourcetype version which has zones support.

452552 Extension property <%s> has a value of <%s>

Description: The property is set to the indicated value.

Solution: This message is informational; no user action is needed.

452747 Reaping tcp_rio_client %p [%x]

Description: The replyio subsystem starts deferred processing of a tcp_rio_client object.

Solution: This message is for diagnostic purposes only; no action required.

452923 About to mount %s. Underlying files and directories will be inaccessible.

Description: HAStoragePlus detected that the directory that will become the specified mount point is not empty, hence once mounted, the underlying files will be inaccessible.

Solution: This is an informational message, no user action is needed.

453064 Error: ${PROCESS} is not started.

Description: the rgmd depends on a server which is not started. The specified server probably failed to start. This error will prevent the rgmd from starting, which will prevent this node from participating as a full member of the cluster.

Solution: Examine other syslog messages occurring at about the same time to see if the problem can be identified. Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing and correcting the problem.

453087 Killed(sigterm) Exiting.

Description: The rtreg server program received a SIGTERM signal and is exiting.

Solution: This is an informational message. No user action is required.

453193 Failure in sending signal to cl_apid.

Description: The update method for the SUNW.Event service was unable to notify the cl_apid following changes to property values.

Solution: Examine other syslog messages occurring at about the same time to see if the problem can be identified. Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing and correcting the problem.

453337 zccfg_get_handle: %s

Description: Failed to get zone handle for zone

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

453552 INTERNAL ERROR:

Description: The rpc.fed server is not able to get zone_handle for the zone.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

453857 Error when starting Oracle CRS using: "%s", error(%s), "%s".

Description: Start of Oracle CRS failed.

Solution: Check errors on the system and correct them before restarting the CRS framework resource. If you cannot resolve this problem, contact your Oracle service representative for assistance.

453919 Pathprefix is not set for resource group %s.

Description: Resource Group property Pathprefix is not set.

Solution: Use scrgadm to set the Pathprefix property on the resource group.

453982 Oracle Grid Infrastructure resource %s has PLACEMENT=%s which is incorrect, PLACEMENT=restricted is required.

Description: The Oracle Grid Infrastructure resource PLACEMENT attribute value is incorrect.

Solution: You must set the PLACEMENT attribute of the Oracle Grid Infrastructure resource equal to restricted. Refer to the Oracle Solaris Cluster documentation for information on how to do this.

454032 CMM: Quorum device %d (old name %s) configuration has changed.

Description: The configuration (name/access_mode/type) of the specified quorum device was changed as indicated. This change might occur if the previous quorum device was removed from the cluster while this node was down, and a new device was added to the cluster and assigned the same ID as the old device. This configuration change might also occur if the configuration (access_mode or type) of the old quorum device was changed.

Solution: This message is informational; no user action is required.

454214 Resource %s is associated with scalable resource group %s. AffinityOn set to TRUE will be ignored.

Description: Self explanatory.

Solution: This is an informational message, no user action is needed.

454247 Error: Unable to create directory <%s> for scha_control timestamp file

Description: The rgmd is unable to access the directory used for the anti-"pingpong" feature, and cannot create the directory (which should already exist). This may prevent the anti-pingpong feature from working, which may permit a resource group to fail over repeatedly between two or more nodes. The failure to access or create the directory might indicate a more serious problem on the node.

Solution: Examine other syslog messages occurring around the same time on the same node, to see if the source of the problem can be identified.

454584 Error: more than one rpc.pmfd is running; will retry

Description: The rpc.pmfd is probably in the process of forking a process to monitor. The script will retry.

Solution: This is an informational message only: No user action is necessary.

454607 INTERNAL ERROR: Invalid resource extension property type <%d> on resource <%s>; aborting node

Description: An attempted creation or update of a resource has failed because of invalid resource type data. This may indicate CCR data corruption or an internal logic error in the rgmd. The rgmd will produce a core file and will force the node to halt or reboot.

Solution: Use clresource show -v and clresourcetype show -v to examine resource properties. If the resource or resource type properties appear to be corrupted, the CCR might have to be rebuilt. If values appear correct, this may indicate an internal error in the rgmd. Re-try the creation or update operation. If the problem recurs, save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance.

454857 The directory '%s' of a file system managed by the resource '%s' of global cluster is planned to share as lofs to zone cluster '%s' on the mount point '%s'. The directory '%s' being shared is not able to access : %s.

Description: The specified directory that you want to share is not accessible.

Solution: Check that the shared directory exists and is accessible, and retry the operation.

454930 Scheduling class %s not configured

Description: An attempt to change the thread scheduling class failed, because the scheduling class was not configured.

Solution: Configure the system to support the desired thread scheduling class.

455061 stop_mgmd: The management server %s was shut down gracefully

Description: The management server was shut down gracefully.

Solution: None

455598 Failed to retrieve the private_maxprivnets value from CCR

Description: Failed to retrieve the private_maxprivnets value from the CCR file.

Solution: Examine other syslog messages occurring at about the same time to see if the problem can be identified. Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing and correcting the problem.

456015 Validate - mysqladmin %s non-existent or non-executable

Description: The mysqladmin command does not exist or is not executable.

Solution: Make sure that MySQL is installed correctly or right base directory is defined.

456036 File system checking is disabled for global file system %s.

Description: The FilesystemCheckCommand has been specified as '/bin/true'. This means that no file system check will be performed on the specified file system. This is not advised.

Solution: This is an informational message, no user action is needed. However, it is recommended to make HA Storage Plus check the file system upon switchover or failover, in order to avoid possible file system inconsistencies.

456053 Could not commit zone cluster %s configuration.

Description: process_cmd_log was unable to commit the zone cluster configuration.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

456566 Validate_sbp - The application resource group %s is not created

Description: The specified application resource group is not configured.

Solution: Make sure that the application resource group is created.

456739 Membership: Unable to get zone reference from Solaris for zone ID %s that is not down.

Description: Membership subsystem was unable to get the zone reference structure from Solaris for a zone that is not down.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

456853 %s can't DOWN.

Description: This means that the Logical IP address could not be set to DOWN.

Solution: There could be other related error messages which might be helpful. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

457114 fatal: death_ff->arm failed

Description: The rgmd program could not enable the failfast mechanism. The failfast mechanism is designed to prevent data corruption by causing the node to be shutdown in the event that the rgmd program dies.

Solution: To avoid data corruption, the rgmd will halt or reboot the node. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

457121 Failed to retrieve the host information for %s: %s.

Description: The data service failed to retrieve the host information.

Solution: If the logical hostname and shared address entries are specified in the /etc/inet/hosts file, check that the entries are correct. Verify the settings in the /etc/nsswitch.conf file include "files" for host lookup. If these are correct, check the health of the name server. For more error information, check the syslog messages.

457308 No SUNW.qfs resource required to run INIT method.

Description: There are no SUNW.qfs resources required to invoke INIT method.

Solution: This is an informational message; no user action is needed.

457343 Validate - Failed to create temporary file

Description: Failed to create temporary file.

Solution: Determine why it was not possible for root to create a temporary file within /var/cluster/run. Once resolved re-enable the resource. Otherwise, contact Oracle support services for further assistance.

458373 fatal: cannot create thread to notify President of state changes

Description: The rgmd daemon was unable to create a thread upon starting up. This is a fatal error. The rgmd will produce a core file and will force the node to halt or reboot to avoid the possibility of data corruption.

Solution: Make sure that the hardware configuration meets documented minimum requirements. Save a copy of the /var/adm/messages files on all nodes, and of the rgmd core file. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

458880 event lacking correct names

Description: The cl_apid event cache was unable to store an event because of the specified reason.

Solution: No action required.

459216 Error determining the resource name

Description: The program could not determine the resource name.

Solution: Investigate possible RGM, DSDL errors. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

459270 The filesystem mount point %s is not configured to zone cluster %s.

Description: Self explanatory.

Solution: This occurs when the file system information is not kept in the appropriate location. Retry the operation after providing the file system mount point information. If the problem persists, contact your authorized Oracle service provider.

459485 Error: could not start the Derby server because of an internal error.

Description: The Derby command server could not be started because of an internal error.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

459998 crsctl stop res sun.%s -n <local_node> returns %s

Description: Stop Oracle Clusterware stop trigger resource using "crsctl stop res <resource> -n <local_node>" command

Solution: None required. Informational message.

461673 Function: validate: Directory %s does not exist, an existing directory is required

Description: The directory mentioned in the parameter file for the PGROOT or PGDATA variable does not exist.

Solution: Fix the parameter file and provide an existing directoy for the variable PGROOT or PGDATA.

461872 check_cmg - Actual (%s) FND processes running is below limit (%s)

Description: While probing the Oracle E-Business Suite concurrent manager, the actual percentage of processes running is below the user defined acceptable limit set by CON_LIMIT when the resource was registered.

Solution: Determine why the number of actual processes for the concurrent manager is below the limit set by CON_LIMIT. The concurrent manager resource will be restarted.

461944 ORACLE_SID is set to a default value. Assign a

Description: The value of the ORACLE_SID extension property should be valid and not the default value of " ".

Solution: The default value is used to facilitate the creation of certain resource and resource group configurations. If the instance needs to be brought online, change the ORACLE_SID extension property value to the valid value for that instance using the appropriate Oracle Solaris Cluster commands and retry bringing the resource online.

462032 ct_tmpl_set_informative: %s

Description: The libclcontract code was unable to configure a process template in which to launch the requested service. Consequently, the process that is using libclcontract was unable to launch the process under its control.

Solution: If the message is isolated, it was probably a transient error. Retry the requested action. If there are many instances of the message, there is a problem with the contract file system. Search for other syslog error messages on the same node. Save a copy of the /var/adm/messages files on all nodes, and report the problem to your authorized Oracle service provider.

462048 Telemetry data service start method timed out

Description: The telemetry data service could not start before the configured timeout elapsed.

Solution: This message is informational; no user action needed.

462083 fatal: Resource <%s> update failed with error <%d>; aborting node

Description: Rgmd failed to read updated resource from the CCR on this node.

Solution: Save a copy of the /var/adm/messages files on all nodes, and of the rgmd core file. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

462253 fattach: %s

Description: fattach failed for the specified reason. The specified program will be terminated.

Solution: Save a copy of the /var/adm/messages files on all nodes. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

462383 Got bad cluster name for caller (zone %s, cluster id %d) : %s

Description: The proxy event listener daemon tried to get the cluster name for a client event listener subsystem, and got a bad cluster name. So the daemon cannot validate the client request.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

462632 HA: repl_mgr: exception invalid_repl_prov_state %d

Description: The system did not perform this operation on the primary object.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

463171 Probe for derby data service successful

Description: Derby data service probe method completed successfully.

Solution: This message is informational; no user action needed.

463533 validate: %s is set in the parameterfile %s but it must be empty

Description: You can set either the host port testcmd triple, or the TestUrl Variable.

Solution: Correct the parameter file entry and register the resource.

463953 %s failed to complete

Description: The command failed.

Solution: Check the syslog and /var/adm/messages for more details.

464869 Command %s failed with exit status <%d>.

Description: Failure in executing the command.

Solution: Check the syslog message for the command description. Check whether the system is low in memory or the process table is full and take appropriate action. Make sure that the executable exists.

465924 ${PROG}: ERROR: Failed to refresh service ${SVC_SWITCH}.

Description: An internal error has occurred while refreshing svc:/system/name-service/switch service on the zone cluster nodes.

Solution: Save the /var/svc/log/system-name-service-switch:default.log on the zone cluster nodes and contact your authorized Oracle service provider for further assistance.

466153 getipnodebyname() timed out.

Description: A call to getipnodebyname(3SOCKET) timed out.

Solution: Check the settings in /etc/nsswitch.conf and make sure that the name resolver is not having problems on the system.

466806 The file system mount point %s is not present in the /etc/vfstab of the zone cluster %s or it is not configured for the zone cluster %s.

Description: Self explanatory.

Solution: This occurs when the file system information is not kept in the appropriate location. Retry the operation after providing the file system mount point information. If the problem persists, contact your authorized Oracle service provider.

466876 The setnum device path '/dev/%s' is not configured for zone %s.\nA volume is accessible to a zone cluster when both the set name path and set number path is configured to zone cluster.

Description: The specified set number device path is not configured for the zone.

Solution: Check whether the disk group or specified volumes set for the resource is configured to the specified zone in terms of set number path. If the problem persists even though the devices are properly configured and available in specified zone, contact your authorized Oracle service provide with /var/adm/messages of cluster nodes and zone configuration information.

467740 start_oep_proxy - Startup of oep_proxy_daemon failed

Description: The proxy daemon for ORCL.oracle_external_proxy failed to start.

Solution: Contact your Oracle support representative for further assistance.

468009 Could not process %s command for zone cluster %s. Error %d.

Description: process_cmd_log was unable to replay the specified zone cluster command log entry.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

468477 Failed to retrieve the property %s: %s.

Description: API operation has failed in retrieving the cluster property.

Solution: For property name, check the syslog message. For more details about API call failure, check the syslog messages from other components.

468732 Too many modules configured for autopush.

Description: The system attempted to configure a clustering STREAMS module for autopush but too many modules were already configured.

Solution: Check in your /etc/iu.ap file if too many modules have been configured to be autopushed on a network adapter. Reduce the number of modules. Use autopush(1m) command to remove some modules from the autopush configuration.

469363 ioctl(IOCDID_INIT) error on path "%s" - %s

Description: IOCDID_INIT ioctl failed on the device.

Solution: No user action is required. This is a internal error. Check the error message string for more specific information about the error.

469752 fatal: could not start rgm reconfig thread

Description: Could not start RGM reconfiguration thread. This may be due to inadequate memory on the system.

Solution: Add more memory to the system. If that does not resolve the problem, contact your authorized Oracle service provider to determine whether a workaround or patch is available.

469935 stop_mgmd: The management server %s did not respond to the stop command

Description: The management server did not respond to the stop cammand it was probably halted already

Solution: None

469965 Creation of the SUNW.rac_cvm resource is not allowed if a SUNW.vucmm_cvm resource is running.

Description: The creation of the SUNW.rac_cvm resource is not permitted when a SUNW.vucmm_cvm resource exists.

Solution: Refer to the documentation of Oracle Solaris Cluster for information about using the SUNW.rac_svm resource type.

470086 sigaction(2) failed while querying disposition for signal SIG%s: error %s

Description: rgmd_starter was unable to query the signal disposition for a signal number because the sigaction(2) function failed. The message contains the system error. rgmd_starter cannot launch an rgmd daemon.

Solution: Save a copy of the /var/adm/messages files on this node, and report the problem to your authorized Oracle service provider.

470092 Failed to validate the IPMP group name %s: ipadm failed to read the adapter information with error code %d.

Description: Validation of IPMP group configuration has failed while retriving the adapter information.

Solution: Examine the IPMP configuration and verify that it is valid. For additional information, look at the syslog error message.

470432 validate_diskgroup - Unable to check if Oracle ASM diskgroup (%s) is valid, ensure that the Oracle ASM instance (%s) is running before retrying

Description: SCMSGS The Oracle ASM instance is not running. The Oracle ASM instance needs to be running in order to validate the Oracle ASM diskgroup.

Solution: Ensure that the Oracle ASM instance is running before either creating the Oracle Solaris Cluster ASM diskgroup resource or updating the ASM_DISKGROUPS extension property.

470528 Could not resolve 'ifconfig_proxy_server' in the name server. Exiting.

Description: The ifconfig proxy program coudn't resolve the ifconfig proxy server object from the local nameserver.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

471182 cl_execd: unable to create failfast object.

Description: The cl_execd program was not able to register with failfast.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

471587 Resource <%s> is restarting too often on <%s>. Sleeping for <%d> seconds.

Description: A misconfiguration in the application and/or its monitor probe, or an administrative action is causing continuous restart requests to be sent to the RGM. Hence RGM is blocking the requests for some time, so that too many restarts are prevented.

Solution: Check accompanying syslog messages being issued from the application or the fault monitor of the data service to diagnose any misconfiguration issues.

471757 %s : %s

Description: Self explanatory.

Solution: Check the syslog messages and try to resolve the problem. If the problem persists, contact your authorized Oracle service provider.

471788 Unable to resolve hostname %s

Description: The cl_apid could not resolve the specified hostname. If this error occurs at start-up of the daemon, it may prevent the daemon from starting. Otherwise, it will prevent the daemon from delivering an event to a CRNP client.

Solution: If the error occurred at start-up, verify the integrity of the resource properties specifying the IP address on which the CRNP server should listen. Otherwise, no action is required.

472060 CMM: Halting because realtime callout processing is not working on this node. current_time %lld last_update_time %lld

Description: This node is being aborted from the cluster as the CMM's realtime callout monitor thread did not run for more than the maximum allowed period. This is caused by heavy interrupt processing load or a blocked interrupt.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

472185 Failed to retrieve the resource group property %s for %s: %s.

Description: The query for a property failed. The reason for the failure is given in the message.

Solution: Save a copy of the /var/adm/messages files on all nodes. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

472748 Error: /usr/ucb/ps is not installed!

Description: HA-Oracle attempted to determine if tnslsnr was running with the command /usr/ucb/ps. The /usr/ucb/ps command does not exist or is not executable.

Solution: Please check that /usr/ucb/ps exists and has correct permissions. If /usr/ucb/ps does not exist, install the package SUNWscpu. Alternatively, shorten the listener name or path to tnslnsr so that the length of the tnslsnr command is less than 79 characters.

472974 Validate - mysqld %s non-existent executable below %s

Description: The mysqld command don't exist or is not executable.

Solution: Make sure that MySQL is installed correctly or right base directory is defined.

473021 in libsecurity uname sys call failed: %s

Description: A client was not able to make an rpc connection to a server (rpc.pmfd, rpc.fed or rgmd) because the host name could not be obtained. The system error message is shown. An error message is output to syslog.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

473141 Resource is disabled, stopping database.

Description: The HADB database will be stopped because the resource is being disabled.

Solution: This is an informational message, no user action is needed.

473257 scf_transaction_create failed: %s

Description: An API call failed.

Solution: Examine log files and syslog messages to determine the cause of the failure. Take corrective action based on any related messages. If the problem persists, report it to your Oracle support representative for further assistance.

473361 Removing Device service %s

Description: Informational message from scdidadm.

Solution: No user action required.

473384 stop_ohs - Stop command (%s) timed-out.

Description: The Oracle HTTP Server failed to stop within the STOP_TIMEOUT period.

Solution: Increase the value of the STOP_TIMEOUT property.

473571 Mismatch between the resource group %s node list preference and the global device %s node list preference detected.

Description: HAStoragePlus detected that the RGM node list preference and the DCS device service node list preference do not match. This is not allowed because AffinityOn is set to True.

Solution: Correct either the RGM node list preference -or- the DCS node list preference.

473653 Failed to retrieve the resource type handle for %s while querying for property %s: %s.

Description: An API operation on the resource type has failed.

Solution: For the resource type name, check the syslog tag. For more details, check the syslog messages from other components. If the error persists, reboot the node.

474169 Storage type is SVM

Description: The disk set type is Solaris Volume Manager for Sun Cluster. This message is an informational message.

Solution: No user action is required.

474256 Validations of all specified global device services complete.

Description: All device services specified directly or indirectly via the GlobalDevicePath and FilesystemMountPoint extension properties respectively are found to be correct. Other Oracle Solaris Cluster components like DCS, DSDL, RGM are found to be in order. Specified file system mount point entries are found to be correct.

Solution: This is an informational message, no user action is needed.

474407 Domain %s was manually started.

Description: The domain was manually started.

Solution: None required. Informational message.

474526 Missing a volume manager resource.

Description: Missing a volume manager resource. The framework must have at least one volume manager resource configured prior to attempting this operation.

Solution: Create a volume manager resource and retry this operation.

474690 clexecd: Error %d from send_fd

Description: clexecd program has encountered a failed fcntl(2) system call. The error message indicates the error number for the failure.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

475309 Oracle Grid Infrastructure type sun.storage_proxy.type is not registered.

Description: The Oracle Grid Infrastructure type sun.storage_proxy.type is not registered.

Solution: You must create the Oracle Grid Infrastructure type sun.storage_proxy.type. Refer to the Oracle Solaris Cluster documentation for information on how to do this.

475391 Per-node extension property ORACLE_SID{%s} is not set, please set it prior to bringing the resource on-line.

Description: The ORACLE_SID per-node extension property has not been set properly for this node.

Solution: Ensure that the ORACLE_SID per-node extension property is set properly prior to bringing the resource on-line.

475398 Out of memory (memory allocation failed):%s.%s

Description: There is not enough swap space on the system.

Solution: Add more swap space. See swap(1M) for more details.

475611 Fault monitor probe response time exceeded extended timeout (%d secs). The database should be checked for hangs or locking problems, or the probe timeout should be increased accordingly

Description: The time taken for the last fault monitor probe to complete was greater than the probe timeout, which had been increased by 10% because of previous slow response.

Solution: The database should be investigated for the cause of the slow response and the problem fixed, or the resource's probe timeout value increased accordingly.

475969 check_httpd_conf_file - The file %s does not contain any 'Listen address:port' formatted entries.

Description: No 'Listen' entries found in the httpd.conf file.

Solution: Ensure that the httpd.conf file contains one or more 'Listen' entries.

476176 reservation fatal error - did_initlibrary() failure

Description: The fencing subsystem was unable to initialize the DID library.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available. Copies of /var/adm/messages from all nodes should be provided for diagnosis. It might be possible to retry the failed operation, depending on the nature of the error. If the message specifies the 'node_join' transition, then this node might be unable to access shared devices. If the failure occurred during the 'release_shared_scsi2' transition, then a node that was joining the cluster might be unable to access shared devices. In either case, it might be possible to reacquire access to shared devices by executing '/usr/cluster/lib/sc/run_reserve -c node_join' on all cluster nodes. If the failure occurred during the 'make_primary' transition, then a device group has failed to start on this node. If another node was available to host the device group, then it should have been started on that node. It might be possible to switch the device group to this node by using the cldevicegroup command. If another node is not available, then the device group will not be started. You can use the cldevicegroup command to retry the attempt to start the device group. If the failure occurred during the 'primary_to_secondary' transition, then the shutdown or switchover of a device group has failed. You can retry the desired action.

476399 Cannot initialize the ORB. Error %d

Description: process_cmd_log was unable to initialize the ORB.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

476427 Domain %s defined using %s/%s.xml.

Description: The domain is being defined using a XML file.

Solution: None, the domain is being defined using a previously defined XML file when the domain was last successfully started.

476649 Could not lookup %s scheduling class info: %s

Description: The server was not able to determine the scheduling mode info, and the system error is shown. An error message is output to syslog.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

476724 Validation failed for IPMP group name <%s> : No entry found in /etc/hostname.<adp> or /etc/hostname6.<adp>for some of its adapters.

Description: An IP address resource(of type LogicalHostname or SharedAddress) has been mis-configured. The indicated IPMP group name is not found in the indicated file on this node. This will cause errors in any attempted operation upon the IP address resource. Additional related failure messages are likely to be found near this one in the syslog output.

Solution: Check the configuration of network resources using the "clresourcegroup show -v +" command, and make any necessary corrections.

477116 IP Address %s is already plumbed.

Description: An IP address corresponding to a hostname in this resource is already plumbed on the system. You can not create a LogicalHostname or a SharedAddress resource with hostnames that map to that IP address.

Solution: Unplumb the IP address or remove the hostname corresponding to that IP address from the list of hostnames in the SUNW.LogicalHostname or SUNW.SharedAddress resource.

477291 scnas fatal error - Unable to open CCR

Description: The program responsible for retrieving NAS configuration information from the CCR has suffered an internal error. Continued errors of this type may lead to a compromise in data integrity.

Solution: Contact your authorized Oracle service provider as soon as possible to determine whether a workaround or patch is available.

477378 Failed to restart the service.

Description: Restart attempt of the dataservice has failed.

Solution: Check the sylog messages that are occurred just before this message to check whether there is any internal error. In case of internal error, contact your Oracle service provider. Otherwise, any of the following situations may have happened. 1) Check the Start_timeout and Stop_timeout values and adjust them if they are not appropriate. 2) This might be the result of lack of the system resources. Check whether the system is low in memory or the process table is full and take appropriate action.

477479 could not create threadpool

Description: The proxy event listener daemon failed to create a threadpool due to insufficient memory available. The daemon would exit now.

Solution: Lack of memory might lead to other problems. You must free up memory on the node or add more memory to the system. If that does not resolve the problem, contact your authorized Oracle service provider to determine whether a workaround or patch is available.

477816 clexecd: priocntl returned %d. Exiting.

Description: clexecd program has encountered a failed priocltl(2) system call. The error message indicates the error number for the failure.

Solution: clexecd program will exit and node will be halted or rebooted to prevent data corruption. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

478328 Failed to retrieve property %s of storage %s : %s

Description: An error occurred while a property of the resource was being retrieved.

Solution: Ensure that the property is defined for the resource. If the property is defined, investigate possible RGM or DSDL errors. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

478523 Could not mount '%s' because there was an error (%d) in opening the directory.

Description: While mounting a Cluster file system, the directory on which the mount is to take place could not be opened.

Solution: Fix the reported error and retry. The most likely problem is that the directory does not exist - in that case, create it with the appropriate permissions and retry.

479184 Error determining the zonename.

Description: The cl_boot_check service could not determine the zonename.

Solution: This message might indicate an internal error. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

479331 Error in res %s execution Stop

Description: Not able to process the resource to stop all the services. Previous messages to this should give the reason.

Solution: If the resource fails after additional retries, contact your Oracle service provider for more information.

479442 in libsecurity could not allocate memory

Description: A server (rpc.pmfd, rpc.fed or rgmd) was not able to start, or a client was not able to make an rpc connection to the server. This problem can occur of the machine has low memory. An error message is output to syslog.

Solution: Determine if the host is low on memory. If not, save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

480224 asmdg_proxy_daemon - failed to determine named pipe (%s) elapsed time

Description: Failed to determine the elapsed time for the named pipe.

Solution: Check the syslog for further messages.

480354 Error on line %ld: %s

Description: Indicates the line number on which the error was detected. The error message follows the line number.

Solution: Please ensure that all entries in the custom monitor action file are valid and follow the correct syntax. After the file is corrected, validate it again to verify the syntax.

481570 qdmd: An error occurred while reading keys on quorum device %s

Description: The quorum device monitoring daemon encountered an error while performing the quorum_read_keys operation on the indicated device.

Solution: Unconfigure the quorum device and reconfigure it. If that fails, replace the quorum device.

481719 validate_diskgroup - Deploying Oracle ASM 11gR2 or later requires Oracle Grid Infrastructure for Clusters and resource type SUNW.scalable_asm_diskgroup_proxy

Description: Oracle 11.2.0.1.0 or later requires Oracle Grid Infrastructure for Cluster and resource type SUNW.scalable_asm_diskgroup_proxy.

Solution: Ensure that Oracle Grid Infrastructure for Cluster has been successfully installed and that SUNW.scalable_asm_diskgroup_proxy is used.

481848 %s: received callback from CZMM for cluster %s, seqnum = %llu

Description: Informational message from the cznetd daemon.

Solution: No user action is required.

482137 could not attach to doorfile %s : %s

Description: The proxy event listener daemon could not attach a door handle to the door server file because fattach(3C) failed for the specified reason.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

482531 IPMP group %s has unknown status %d. Skipping this IPMP group.

Description: The status of the IPMP group is not among the set of statuses that is known.

Solution: Save a copy of the /var/adm/messages files on all nodes. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

482769 Generic_Affinity resource property cannot be set when Affinity_timeout resource property is less than 50 Seconds.

Description: When you set the Generic_Affinity resource property, the Affinity_timeout resource property must be set to a value that is at least 50 Seconds.

Solution: Set the value of the Affinity_Timeout resource property to at least 50 seconds.

482901 Can't allocate binding element

Description: Client affinity state on the node has become incomplete due to unexpected memory shortage. New connections from some clients that have existing connections with this node might go to a different node as a result.

Solution: If client affinity is a requirement for some of the sticky services, say due to data integrity reasons, these services must be brought offline on the node, or the node itself should be restarted.

483242 Skipped remote path "%s"

Description: The remote path to the device is not handled on this node.

Solution: This is a informational message, there is no user action.

483446 Fault-monitor successfully stopped.

Description: The fault monitor of this ScalMountPoint resource was stopped successfully. This message is an informational message.

Solution: No user action is required.

483769 Function: check_saprepenq: The sapcontrol command GetProcesslList to probe saprepenq for instance %s did not complete within %s seconds

Description: The sapcontrol command GetProcessListto to probe saprepenq did not complete within 80 percent of the probe timeout.

Solution: None

484189 Failed to disable %s service

Description: The Solaris service management facility failed to disable the service instance that the fault management resource identifier (FMRI) in the /var/adm/messages specifies.

Solution: Run the command 'svcadm disable <fmri>' to disable the service instance. Then run the command 'svccfg -s <fmri>' to enable you to modify the configuration of the service instance interactively. Use the subcommand 'addpg startd framework' to add the startd and framework property group and the subcommand 'setprop startd/duration = astring: transient' to set the duration to transient. After modfiying the configuration of the service instance, run the command 'svcadm enable <fmri>' to enable the service instance. Then run the command 'svcs -x <service>' command to verify that the service is online. If the problem persists, contact your Oracle Support representative for further assistance.

484248 SCSLM pools facility is disabled

Description: Should never occur.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

484330 Function: check_sczbt - who -r did not run successfully (return code %s) in the non-global zone %s, try again in 5 seconds

Description: The who -r command did not run successfully in the configured non-global zone. The state is checked again in 5 seconds.

Solution: None.

484513 Failed to retrieve the probe command with error <%d>. Will continue to do the simple probe.

Description: The fault monitor failed to retrieve the probe command from the cluster configuration. It will continue using the simple probe to monitor the application.

Solution: No action required.

484726 Resource %s named in one of the resource dependencies properties is not a SharedAddress resource.

Description: The dependee resource is not a SharedAddress resource.

Solution: Specify at least one SharedAddresses resource as a dependee.

484764 Waiting for the SUNW.qfs resource group to come online.

Description: This is a notification from the handler that it is going to wait for SUNW.qfs resource groups to come online.

Solution: This is an informational message; no user action is needed.

485462 Error: duplicate method <%s> launched on resource <%s> in resource group <%s> on node <%s>

Description: Due to an internal error, the rgmd state machine has attempted to launch two different methods on the same resource on the same node, simultaneously. The rgmd will reject the second attempt and treat it as a method failure.

Solution: Save a copy of the /var/adm/messages files on all nodes. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

485464 clcomm: Failed to allocate simple xdoor server %d

Description: The system could not allocate a simple xdoor server. This can happen when the xdoor number is already in use. This message is only possible on debug systems.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

485680 reservation warning(%s) - Unable to lookup local_only flag for device %s.

Description: The device fencing program was unable to determine if the specified device is marked as local_only. This device will be treated as a non- local_only device and nodes not within the cluster will be fenced from it.

Solution: If the device in question is marked marked as local_only and is being used as the boot device or the mirror of a boot device for a node, then that node may be unable to access this device and hence, unable to boot. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

485857 start_process_scheduler - psadmin -p start -d %s failed to start one or more components. Cleanup of IPC resources (psadmin -p cleanipc -d %s) will get performed. Second attempt to start will follow.

Description: One or more components failed to start through psadmin -p start -d ${Psft_Domain}. An error message was reported. One attempt at an IPC cleanup will occur.

Solution: Check the log messages for any errors. A second attempt to start the PeopleSoft process scheduler domain will occur. Verify if the second start was successful.

485941 Function: check_sczsh - %s does not exist or is not executable in zone %s - early End

Description: The command specified for variable ServiceProbeCommand within the /opt/SUNWsczone/sczsh/util/sczsh_config configuration file is not executable or does not exist in the specified zone.

Solution: Make sure that the command specified for variable ServiceProbeCommand within the /opt/SUNWsczone/sczsh/util/sczsh_config configuration file is existing and executable for user root in the specified zone. If you do not want to re-register the resource, make sure the variable ServiceProbeCommand is properly set within the ${PARAMETERDIR}/sczsh_${RS} parameterfile.

486037 cl_execd: Attempt to set scheduling class to Fixed returned %d. Exiting.

Description: cl_execd program failed to set the priority and the scheduling class to Fixed for the task in execution.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

486841 SIOCGLIFCONF: %s

Description: The ioctl command with this option failed in the cl_apid. This error may prevent the cl_apid from starting up.

Solution: Examine other syslog messages occurring at about the same time to see if the problem can be identified. Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing and correcting the problem.

487022 The networking components for scalable resource %s have been configured successfully for method %s.

Description: The calls to the underlying scalable networking code succeeded.

Solution: This is an informational message, no user action is needed.

487418 libsecurity: create of rpc handle to program %s (%lu) failed, will not retry

Description: A client of the specified server was not able to initiate an rpc connection, after multiple retries. The maximum time allowed for connecting has been exceeded, or the types of rpc errors encountered indicate that there is no point in retrying. An accompanying error message shows the rpc error data. The pmfadm or scha command exits with error. The program number is shown. To find out what program corresponds to this number, use the rpcinfo command. An error message is output to syslog.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

487516 Failed to obtain SAM-FS constituent volumes for %s.

Description: HAStoragePlus was not able to determine the volumes that are part of this SAM-FS special device.

Solution: Check the SAM-FS file system configuration. If the problem persists, contact your authorized Oracle service provider.

487574 Failed to alloc memory

Description: A scha_control call failed because the system has run out of swap space. The system is likely to halt or reboot if swap space continues to be depleted.

Solution: Investigate the cause of swap space depletion and correct the problem, if possible.

487827 CCR: Waiting for repository synchronization to finish.

Description: This node is waiting to finish the synchronization of its repository with other nodes in the cluster before it can join the cluster membership.

Solution: This is an informational message, generally no user action is needed. If all the nodes in the cluster are hanging at this message for a long time, look for other messages. The possible cause is the cluster hasn't obtained quorum, or there is CCR metadata missing or invalid. If the cluster is hanging due to missing or invalid metadata, the ccr metadata needs to be recovered from backup. Contact your authorized Oracle service provider for assistance.

487835 CCR lookup failed for zone cluster %s

Description: The CCR raised an exception while looking up the clzone_config table.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

488313 Could not start Proxy Daemon.

Description: The agent failed to startup the Monitor of a resource of type SUNW.scalable_rac_server_proxy.

Solution: Contact your Oracle support representative for further assistance.

488586 [PID %d] Could not re-subscribe with the proxy event listener daemon : status = %s, status from server = %s

Description: The specified process could not resubscribe with the proxy event listener daemon and hence will not receive cluster events. The specified process will exit now.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

488595 Cluster Configuration Repository transformation completed successfully

Description: Cluster Configuration Repository transformation completed successfully.

Solution: This is an informational message, no user action is needed.

489438 clcomm: Path %s being drained

Description: A communication link is being removed with another node. The interconnect might have failed or the remote node might be down.

Solution: Any interconnect failure should be resolved, and/or the failed node rebooted.

489465 Severe XDR Error, Cannot recover.

Description: An internal error has occurred in the inter-process communication between rgmd and another clustering process. Other related error messages might precede or follow this one in the syslog output.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

489903 setproject: %s; attempting to continue the process with the system default project.

Description: Either the given project name was invalid, or the caller of setproject() was not a valid user of the given project. The process was launched with project "default" instead of the specified project.

Solution: Use the projects(1) command to check if the project name is valid and the caller is a valid user of the given project.

489913 The state of the path to device: %s has changed to OK

Description: A device is seen as OK.

Solution: No action required.

489944 validate_zcboot_resource - Oracle Grid Infrastructure type sun.zcboot_proxy.type is not a local_resource.

Description: The Oracle Grid Infrastructure type sun.zcboot_proxy.type is not a local_resource.

Solution: You must create the Oracle Grid Infrastructure type sun.zcboot_proxy.type as a local_resource. Refer to the Oracle Solaris Cluster documentation for information on how to do this.

490049 Giveover attempt failed for %s after exausting retries: resource group is currently stuckin reconfiguration.

Description: Repeated reconfiguration errors while attempting to switch over the QFS meta data resource group is likely an error in the cluster software.

Solution: It is likely that the shared QFS file system meta data server has been forcibly unmounted. This can cause problems with proper operation of shared QFS on other nodes. Verify that shared QFS filesystem in use are working properly. If they are not, follow the QFS file system recovery procedures. If this problem persists contact your authorized Oracle service provider to determine whether a workaround or patch is available.

490268 Failfast : Failed to reboot zone %s (zone ID %d) as door upcall to 'zoneadmd' door failed with error code %d. Failfast will halt the zone now.

Description: Failfast failed to reboot zone, because door upcall to zoneadmd daemon failed. Failfast will halt the zone as a result.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

490977 dl_bind ack bad len %d

Description: Sanity check. The message length in the acknowledgment to the bind request is different from what was expected. We are trying to open a fast path to the private transport adapters.

Solution: Reboot of the node might fix the problem.

491081 resource %s removed.

Description: This is a notification from the rgmd that the operator has deleted a resource. This message can be used by system monitoring tools.

Solution: This is an informational message; no user action is needed.

491533 DB_password_file should be a regular file: %s

Description: The DB_password_file extension property needs to be a regular file.

Solution: Give appropriate file name to the extension property. Make sure that the path name does not point to a directory or any other file type. Moreover, the DB_password_file could be a link to a file also.

491579 clcomm: validate_policy: fixed size pool low %d must match moderate %d

Description: The system checks the proposed flow control policy parameters at system startup and when processing a change request. The low and moderate server thread levels must be the same for fixed size resource pools.

Solution: No user action required.

491762 Failed to retrieve netmask for %s - will use 0x%x from physical interface

Description: Netmask for the given IP address is not found in name service. The netmask from the IPMP group interface will be used instead.

Solution: Add netmask for the given subnet to the local /etc/netmasks file or add it to the name server specified in /etc/nsswitch.conf.

492187 Failed to retrieve IOTimeout property: %s

Description: There was an error retrieving a resource property.

Solution: Investigate possible RGM, DSDL errors. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

492431 validate_psadmin_env - %s/appserv/psadmin -env reported %s for variable % - but %s is expected

Description: psadmin -env reports a different value than has been configured for the variable named in the error message.

Solution: Ensure that the profile for the user configured for Psft_User is correct and psadmin -env reflects the PeopleSoft Enterprise server configuration that is configured for this resource. Verify the variable named in the error message.

492483 Cannot disable FMRI: %s %s

Description: An attempt to disable the SMF service has failed

Solution: No user action is required.

492585 Directory %s, exported from filer %s, is not configured within Oracle Solaris Cluster.

Description: The specified directory, which is exported from the specified NAS device, has not yet been configured with Oracle Solaris Cluster.

Solution: Run the 'scnasdir' command to configure the directory with Oracle Solaris Cluster and repeat the operation.

492603 launch_fed_prog: fe_method_full_name() failed for program <%s>

Description: The ucmmd was unable to assemble the full method pathname for the fed program to be launched. This is considered a launch_fed_prog failure.

Solution: Examine other syslog messages occurring at about the same time to see if the problem can be identified. Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing and correcting the problem.

492744 oep_validate - %s/tnsnames.ora does not exist

Description: ${TNS_ADMIN}/tnsnames.ora does not exist.

Solution: Ensure that ${TNS_ADMIN}/tnsnames.ora exists.

492781 Retrying to retrieve the resource information: %s.

Description: An update to cluster configuration occured while resource properties were being retrieved

Solution: This is only an informational message.

492881 Function: validate: The Architecture property must be set to comb or left undefined

Description: The architecture property must be set to comb left undefined

Solution: Specify a valid value for the architecture property.

492922 Validate callback failed.

Description: The validate callback failed.

Solution: Contact your authorized Oracle service provider for assistance in diagnosing the problem.

492953 ORACLE_HOME/bin/lsnrctl not found ORACLE_HOME=%s

Description: Oracle listener binaries not found under ORACLE_HOME. ORACLE_HOME specified for the resource is indicated in the message. HA-Oracle will not be able to manage Oracle listener if ORACLE_HOME is incorrect.

Solution: Specify correct ORACLE_HOME when creating resource. If resource is already created, please update resource property 'ORACLE_HOME'.

493085 Failed to initialize the ORB. Exiting the daemon initialization.

Description: The syncsa server program was unable to initialize its interface to the low-level cluster machinery.

Solution: Make sure the nodes are booted in cluster mode. If so, contact your authorized Oracle service provider to determine whether a workaround or patch is available.

493130 Could not copy %s to %s

Description: HA-Oracle copies the Oracle shared library used by the fault monitor to a local file system. Without this local copy of the Oracle shared library, the HA-Oracle installation is vulnerable because failures may not be detected when the shared library under <ORACLE_HOME>/lib or <ORACLE_HOME>/lib32 (32-bit installation) is unavailable.

Solution: Verify that the specified Oracle shared library under <ORACLE_HOME>/lib or <ORACLE_HOME>/lib32 (32-bit installation) is readable and that the local directory/file as specified in the error message is writable. There should be sufficient disk space in the local file system to copy the shared library. You may manually copy the shared library by using 'cp -p <source> <destination>' as 'root' (replace the source and destination by the appropriate pathnames as indicated in the error message).

493261 Could not remove node %s from device service %s, error = %d

Description: Failed to remove the indicated node from a device service because of the indicated error.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

493641 Failed to open file %s.

Description: The master configuration file under /etc/opt/SUNWsamfs for the specified shared QFS file system could not be opened.

Solution: Determine whether the file exists. If the file exists, ensure that the file-access permissions are correct. If the file does not exist, ensure that the specified file system is correctly configured with Oracle Solaris Cluster.

493657 Unable to get status for IPMP group %s.

Description: The specified IPMP group is not in functional state. Logical host resource can't be started without a functional IPMP group.

Solution: LogicalHostname resource will not be brought online on this node. Check the messages (cl_pnmd errors) that encountered just before this message for any IPMP or adapter problem. Correct the problem and rerun the clresourcegroup command.

493752 set_asm_variables - Ensure that CRS_HOME=%s is set when Oracle 11gR2 or later is installed

Description: When Oracle 11gR2 is installed, CRS_HOME must be set to ${CRS_HOME}

Solution: Ensure that CRS_HOME represents the ${CRS_HOME} path name.

493944 set_scproxy_resource - Oracle Grid Infrastructure resource %s has TYPE=%s which is incorrect, TYPE=sun.storage_proxy.type is required.

Description: The Oracle Grid Infrastructure resource sun.<resource> TYPE attribute value is incorrect.

Solution: You must create Oracle Grid Infrastructure resource, sun.<resource>, with the TYPE attribute equal to sun.storage_proxy.type. Note that <resource> represents the Oracle Solaris Cluster SUNW.ScalDeviceGroup resource name. Refer to the Oracle Solaris Cluster documentation for information on how to do this.

493946 Failed to set cachefile location to '%s' for ZFS pool '%s'.

Description: HAStoragePlus failed to change the specified pool 'cachefile' property. This will not affect the pool operations in any way. It will cause HAStoragePlus to fail to record the online pool configuration and prevent the pool from importing any faster.

Solution: Contact your authorized Oracle service provider with /var/adm/messages of all nodes to determine whether a workaround or patch is available.

494475 Function: val_in_global - Not in the global zone

Description: A start, stop or probe command was used from the local zone.

Solution: Use the start, stop and probe commands from th eglobal zone only.

494478 resource %s in resource group %s has requested %s on %s.

Description: The RGM has recieved a request for the specified scha_control(1HA) or scha_control(3HA) operation.

Solution: No user action required.

494534 clcomm: per node IP config %s%d:%d (%d): %d.%d.%d.%d failed with %d

Description: The system failed to configure IP communications across the private interconnect of this device and IP address, resulting in the error identified in the message. This happened during initialization. Someone has used the "lo0:1" device before the system could configure it.

Solution: If you used "lo0:1", use another device. Otherwise, Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

494913 pmfd: unknown action (0x%x)

Description: An internal error has occured in the rpc.pmfd server. This should not happen.

Solution: Save the /var/adm/messages file. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

495386 INTERNAL ERROR: %s.

Description: An internal error has occurred.

Solution: Save a copy of the /var/adm/messages files on all nodes. Contact your authorized Oracle service provider for assistance in diagnosing the problem.

495529 Prog <%s> failed to execute step <%s> - <%s>

Description: ucmmd failed to execute a step.

Solution: Examine other syslog messages occurring at about the same time to see if the problem can be identified and if it recurs. Save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance.

495587 CCR commit transaction failed for zone cluster %s

Description: The CCR raised an exception while committing a transaction on the zone cluster configuration table.

Solution: Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

495710 Stopping oracle server using shutdown immediate

Description: Informational message. Oracle server will be stopped using 'shutdown immediate' command.

Solution: None

496485 setproject call failed : %s.

Description: The setproject call failed. Should never occur.

Solution: Verify project database. Contact your authorized Oracle service provider to determine whether a workaround or patch is available.

496555 couldn't query zonename

Description: A scalable service resource attempting to execute in a non-global zone was unable to find the zone name in Solaris. This causes the currently executing method to fail. The RGM takes the usual recovery actions for a method failure. Other related syslog messages might be found near this one.

Solution: If the cause of the failure cannot be determined from syslog messages, contact your authorized Oracle service provider to determine whether a workaround or patch is available.

496746 reservation error(%s) - USCSI_RESET failed for device %s, returned%d

Description: The device fencing program has encountered errors while trying to access a device. All retry attempts have failed.

Solution: This may be indicative of a hardware problem, which should be resolved as soon as possible. Once the problem has been resolved, the following actions may be necessary: If the message specifies the 'node_join' transition, then this node may be unable to access the specified device. If the failure occurred during the 'release_shared_scsi2' transition, then a node which was joining the cluster may be unable to access the device. In either case, access can be reacquired by executing '/usr/cluster/lib/sc/run_reserve -c node_join' on all cluster nodes. If the failure occurred during the 'make_primary' transition, then a device group might have failed to start on this node. If the device group was started on another node, move it to this node by using the cldevicegroup command. If the device group was not started, you can start it by using the cldevicegroup command. If the failure occurred during the 'primary_to_secondary' transition, then the shutdown or switchover of a device group might have failed. If so, the desired action may be retried.

496814 restart_dependency - Dependent resource to resource %s has been restarted, restart this resource %s

Description: -4 a restart of the dependant resource has been noticed, it might be necessary to restart the resource depending on

Solution: -4 check the validity of the service. there might be a dependency problem, a sub resource has been restarted, and functionality might have been impaired

496884 Despite the warnings, the validation of the hostname list succeeded.

Description: While validating the hostname list, non fatal errors have been found.

Solution: This is informational message. It is suggested to correct the errors if applicable. For the error information, check the syslog messages that have been encountered before this message.

497704 Creation of resource <%s> failed because the inter-cluster weak dependencies could not be set

Description: Resource creation failed due to specification of invalid inter cluster dependencies.

Solution: Check the remote cluster name or remote resource name and retry the same command.

497864 Timeout (%d secs) exceeded to check the status of %s service.

Description: The timeout to check the status of the specified SMF service is exceeded.

Solution: Check the status of the SMF service and ensure that the service is online by rectifying the problems (if any). Re-try the operation after the service is online. Contact your authorized Oracle service provider to determine whether a workaround or patch is available if the problem persists.

497867 open64 pbundle: %s

Description: The libclcontract code was unable to open a file in the /system/contract/process/ directory. Consequently, the process that is using libclcontract was unable to receive contract events. That process will exit.

Solution: Search for other syslog error messages on the same node. Save a copy of the /var/adm/messages files on all nodes, and report the problem to your authorized Oracle service provider.

497900 ZFS pool cachefile plugin failed to create directory '%s' : %s.

Description: The ZFS pool cachefile plugin failed to create specified directory.

Solution: Check the log message for the reason of failure and try to resolve the problem. Otherwise contact your authorized Oracle service provider.

498266 Could not delete inter-cluster resource group affinity information on the targetcluster; source RG = <%s>, target RG_affinity = <%s>

Description: The indicated source resource group on the local cluster is being deleted. This resource group had the indicated inter-cluster target RG affinity. Oracle Solaris Cluster was unable to remove the affinity information on the target cluster. Possible cause could be that the remote zone cluster is down, or the target affinity rg is switching, or the remote target affinity rg itself is invalid

Solution: No action.

498582 Attempt to load %s failed: %s.

Description: A shared address resource was in the process of being created. In order to prepare this node to handle scalable services, the specified kernel module was attempted to be loaded into the system, but failed.

Solution: This might be the result from the lack of system resources. Check whether the system is low in memory and take appropriate action (e.g., by killing hung processes). For specific information check the syslog message. After more resources are available on the system , attempt to create shared address resource. If problem persists, reboot.

498711 Could not initialize the ORB. Exiting.

Description: clexecd program was unable to initialize its interface to the low-level clustering software.

Solution: This might occur because the operator has attempted to start clexecd program on a node that is booted in non-cluster mode. If the node is in non-cluster mode, boot it into cluster mode. If the node is already in cluster mode, contact your authorized Oracle service provider to determine whether a workaround or patch is available.

498810 %s non-existent executable.

Description: ${PLUGIN_PROBE} does not exist or is not executable.

Solution: Check the pathname exists and that ${PLUGIN_PROBE} is executable.

498909 accept: %s

Description: The cl_apid received the specified error from accept(3SOCKET). The attempted connection was ignored.

Solution: No action required. If the problem persists, save a copy of the /var/adm/messages files on all nodes and contact your authorized Oracle service provider for assistance in diagnosing and correcting the problem.

498946 Validate_sbp - MySQL resource %s is configured for something else

Description: The specified mysql replication resource is configured for something else.

Solution: Make sure that the defined resource is either unconfigured, or is the desired MySQL replication resource.

499117 Bringing the resource groups containing SUNW.qfs resources %s.

Description: This is a notification from the handler that it is changing the SUNW.qfs resource groups state.

Solution: This is an informational message; no user action is needed.

499382 Request to mount QFS file systems is failed : %s.

Description: The zone boot handler received failure status for the request to RGM to mount the shared qfs file systems.

Solution: Investigate the zone boot log messages and rectify the problem. If the problem persists after rebooting the zone, contact your authorized Oracle service provider with a copy of /var/adm/messages files on all nodes.

499430 set_execute_environment_variables - The Oracle Fusion Middleware Web Tier software owner %s does not belong to project %s.

Description: The userid does not belong to the specified project.

Solution: Ensure that the userid exists within the project and that the userid and project name are correct.

499486 Unable to set socket flags: %s.

Description: Failed to set the non-blocking flag for the socket used in communicating with the application.

Solution: This is an internal error, no user action is required. Also contact your authorized Oracle service provider.

499715 Error in scha_resourcegroup_get

Description: Error in reading the resource group

Solution: Check if the RGM functionalities are working correctly and if the resource group is present. Contact your Oracle service provider for more information.

499756 CMM: Node %s: joined cluster.

Description: The specified node has joined the cluster.

Solution: This is an informational message, no user action is needed.

499775 resource group %s added.

Description: This is a notification from the rgmd that a new resource group has been added. This message can be used by system monitoring tools.

Solution: This is an informational message; no user action is needed.

499796 reservation notice(%s) - MHIOCENABLEFAILFAST success during retry attempt: %d

Description: Informational message from reserve on ioctl success during retry.

Solution: No user action required.

499903 Error %d running quotacheck for %s

Description: The /usr/sbin/quotacheck command failed for $mountp.

Solution: The system administrator should run the /usr/sbin/quotacheck command manually. If that succeeds, also run /usr/sbin/quotaon. If the quotacheck attempt fails, stop any applications that are using the file system and attempt the quotacheck command again.

499940 Attempted client registration would exceed the maximum clients allowed: %d

Description: The cl_apid refused a CRNP client registration request because it would have exceeded the maximum number of clients allowed to register.

Solution: If you wish to provide access to the CRNP service for more clients, modify the max_clients parameter on the SUNW.Event resource.