|Oracle® Fusion Middleware Reference for Oracle Directory Server Enterprise Edition
11g Release 1 (22.214.171.124.0)
Part Number E28969-01
|PDF · Mobi · ePub|
For fast response time to client requests, Directory Server caches directory information in memory. If you must have top Directory Server performance, but cannot fit all directory data in available memory, you can tune cache settings to optimize performance.
This chapter describes the types of cache whose settings you can tune. It also describes how Directory Server uses those types of cache. This chapter includes following topics:
This section describes the types of cache used by Directory Server.
Figure 8-1 shows the caches for an instance of Directory Server with three suffixes, each with its own entry cache.
Directory Server also uses a file system cache. The file system cache is managed by the underlying operating system, and by I/O buffers in disk subsystems.
Figure 8-1 Entry and Database Caches in Context
Each instance of Directory Server has one database cache. The database cache holds pages from the databases that contain indexes and entries. Each page is not an entry, but a slice of memory that contains a portion of the database.
Directory Server moves pages between the database files and the database cache to maintain the maximum database cache size you specify. The amount of memory used by Directory Server for the database cache can be larger than the specified size. This is because Directory Server requires additional memory to manage the database cache.
The memory can be monitored by empirical testing and by the use of tools such as
pmap(1) on Solaris systems. The
ps(1) utility can also be used with the
-p pid and
-o format options to view current memory used by a particular process such as Directory Server
ns-slapd. For more information, refer to the operating system documentation.
The entry cache holds recently accessed entries that are formatted for delivery to client applications.
By default, the entry cache is completely managed by the server, depending upon the load. The entry cache memory is allocated as required until it reaches a size larger than, but based on the maximum entry cache size you specify.
Entries stored in the entry cache are already formatted so Directory Server can return entries from an entry cache efficiently. Entries in the database must be formatted and stored in the entry cache before they are delivered to client applications.
You can configure Directory Server to pre-load, or prime, the entry cache so that only useful user data is written to disk before Directory Server is shut down. Subsequently, only the useful data is read when Directory Server is restarted. When you choose the pre-load option, only the most recently used
entryIDs are saved to disk so that the database cache and the DN cache are automatically primed during startup. See the Administrator's Guide for Oracle Directory Server Enterprise Editionmore information.
By default, the entry cache is completely managed by the server, depending upon the load. You may want to evaluate how the server performs with the default values before you modify entry cache settings.
The maximum size you specify indicates how much memory Directory Server requests from the underlying memory allocation library. Depending on how the memory allocation library handles requests for memory, the actual memory used may be much larger than the amount of memory available to Directory Server for the entry cache.
The memory used by the Directory Server process depends on the memory allocation library that is used, and depends on the entries cached. Entries with many small attribute values usually require more overhead than entries with few large attribute values.
See Administrator's Guide for Oracle Directory Server Enterprise Edition or the server man page for details about the cache size properties that you can set. See the Deployment Planning Guide for Oracle Directory Server Enterprise Edition for tuning recommendations.
The import cache is created and used when a suffix is initialized. If the deployment involves offline suffix initialization only, import cache and database cache are not used together. In this case, the import cache and database cache do not need to be added together when the cache size is aggregated. See Total Aggregate Cache Size. When the import cache size is changed, the change takes effect the next time the suffix is reset and initialized. The import cache is allocated for the initialization, then released after the initialization.
Directory Server handles import cache in the same way as it handles database cache. Sufficient physical memory must be available to prevent swapping. The benefits of having a larger import cache diminish for cache sizes larger than 2 GB.
The operating system allocates available memory not used by Directory Server caches and other applications to the file system cache. The file system cache holds data that was recently read from the disk, making it possible for subsequent requests to obtain data from cache rather than having to read it again from the disk. Because memory access is many times faster than disk access, leaving some physical memory available for the file system cache can boost performance.
The filesystem cache can be used as a replacement for some of the database cache. Database cache is more efficient for Directory Server use than file system cache, but file system cache is not directly associated with the Directory Server
ns-slapd process. Potentially, a larger total cache can be made available to Directory Server than would be available by using database cache alone.
Refer to the operating system documentation for information about file system cache.
The sum of all caches used simultaneously must remain smaller than the total size of available physical memory, minus the memory intended for file system cache, minus the memory intended for other processes such as Directory Server itself.
For 32-bit servers, the total aggregate cache size must be limited so that the total Directory Server
ns-slapd process size is less than the maximum process size allowed by the operating system. In practice, this limit is generally in the 2-3 GB range.
If suffixes are initialized while Directory Server is online, the sum of the database cache, the entry cache, and the import cache sizes should remain smaller than the total size of available physical memory.
Table 8-1 Import Operations and Cache Use
|Cache Type||Offline Import||Online Import|
If all suffixes are initialized while Directory Server is offline, the import cache does not coexist with the database cache, so the same memory can be allocated to the import cache for offline suffix initialization and to the database cache for online use. If you opt to implement this special case, however, ensure that no online bulk loads are performed on a production server. The sum of the caches used simultaneously must remain smaller than the total size of available physical memory.
For very large caches, it is important that the memory used by Directory Server does not exceed the size of available physical memory. If the available physical memory is exceeded, the system pages repeatedly and performance is degraded.
In Figure 8-2, individual lines represent threads that access different levels of memory. Broken lines represent probable bottlenecks to minimize through effective tuning of Directory Server.
Figure 8-2 How Directory Server Performs Searches
The following sections describe how Directory Server performs searches by using the cache. By processing subtree searches as described in the following sections, Directory Server returns results without loading the whole set of results into memory.
Base searches specify a base DN and are the simplest type of searches for Directory Server to manage. Directory Server processes base searches in the following stages.
Directory Server attempts to retrieve the entry from the entry cache.
If the entry is found in the entry cache, Directory Server checks whether the candidate entry matches the filter provided for the search.
If the entry matches the filter provided for the search, Directory Server returns the formatted, cached entry to the client application.
Directory Server attempts to retrieve the entry from the database cache.
If the entry is found in the database cache, Directory Server copies the entry to the entry cache for the suffix. Directory Server proceeds as if the entry had been found in the entry cache.
Directory Server attempts to retrieve the entry from the database itself.
If the entry is found in the database, Directory Server copies the entry to the database cache . Directory Server proceeds as if the entry had been found in the database cache.
Searches on a subtree or a level of a tree involve additional processing to handle multiple entries. Directory Server processes subtree searches and one-level search in the following stages.
Directory Server attempts to define a set of candidate entries that match the filter from indexes in the database cache.
If no appropriate index is present, the set of candidate entries must be found directly in the database itself.
For each candidate entry, Directory Server performs the following tasks.
Performs a base search to retrieve the entry.
Checks whether the entry matches the filter provided for the search.
Returns the entry to the client application if the entry matches the filter.
In Figure 8-3, individual lines represent threads that access different levels of memory. Broken lines represent probable bottlenecks to minimize through effective tuning of Directory Server.
Figure 8-3 How Directory Server Performs Updates
The figure does not show the impact of the internal base search performed to get the entry for update.
Directory Server processes updates in the following stages.
Directory Server performs a base DN search to retrieve the entry, or to update or verify the entry in the case of an add operation that it does not already exist.
Directory Server updates the database cache and any indexes affected.
If data affected by the change have not been loaded into the database cache, this step can result in disk activity while the relevant data are loaded into the cache.
Directory Server writes information about the changes to the transaction log and waits for the information to be flushed to disk, which happens periodically, at each checkpoint. Directory Server database files are thus updated during the checkpoint operation, not for each write.
Directory Server formats and copies the updated entry to the entry cache for the suffix.
Directory Server returns an acknowledgement of successful update to the client application.
The following figure illustrates how Directory Server initializes a suffix by using the cache. Individual lines represent threads that access different levels of memory. Broken lines represent probable bottlenecks to minimize through effective tuning of Directory Server.
Figure 8-4 How Directory Server Initializes a Suffix
Directory Server initializes a suffix in the following stages:
Starts a thread to feed a buffer from LDIF.
Starts a thread for each index affected and other working threads to update the indexes. These threads use the import cache.
Reads from and writes to the database files when import cache runs out.
Directory Server also writes log messages during suffix initialization, but does not write to the transaction log.
Tools for suffix initialization delivered with Directory Server provide feedback on the cache hit rate and import throughput. If cache hit rate and import throughput drop together, it is possible that the import cache is too small.