Go to main content

SPARC T5-4 Server Service Manual

Exit Print View

Updated: February 2019
 
 

Verify the PCIe Card

  1. Verify that the PCIe card carrier Fault LED is not illuminated.
  2. Verify that the System Service Required LEDs on the front panel and rear I/O module are not illuminated.

    See Interpreting LEDs.

  3. Verify that the System PCIe Fault LED on the front panel is not illuminated.

    See Front Panel Controls and LEDs.

  4. Perform one of the following tasks based on your verification results:
  5. Verify that the green Power LED is lit on the PCIe card carrier that you installed.
  6. At the Oracle Solaris prompt, ensure that the PCIe card is connected and online:
    # hotplug list -cv
    Connection           State           Description
    ______________________________________________________________________________
    PCIE1                EMPTY           PCIe-Native
    ...
    PCIE7                ENABLED         PCIe-Native
     Device                     Usage
     ___________________________________________________________________________
     SUNW,qlc@0                 -
     fp                         -
     disk                       -
     fp@0,0                     -
     SUNW,qlc@0,1               -
     fp                         -
     disk                       -
     fp@0,0                     -
    PCIE13               EMPTY           PCIe-Native
    PCIE15               EMPTY           PCIe-Native
    

Related Information