Oracle ILOM
Properties That Affect POST Behavior
Note - The value of keyswitch_state must
be normal when individual POST parameters are
changed.
| Caution -
Setting the verbosity values to max will result in POST taking a longer
amount of time to complete its testing of the server.
|
Table 1 /HOST
keyswitch_state
|
|
normal
|
The server can power on and run POST (based on the other parameter settings). This parameter
overrides all other commands.
|
diag
|
The server runs POST based on predetermined settings.
|
standby
|
The server cannot power on.
|
locked
|
The server can power on and run POST, but no flash updates can be made.
|
|
Table 2 /HOST/diag
mode
|
|
off
|
POST does not run.
|
normal
|
POST runs according to diag
level value.
|
max
|
If diag
mode=normal, runs all the minimum tests plus extensive
processor and memory tests.
|
min
|
If diag
mode=normal, runs minimum set of tests.
|
|
Table 3 /HOST/diag
trigger
|
|
hw-change
|
(default) — Runs POST following a FRU replacement or an AC power cycle.
|
all-resets
|
Runs POST on all resets.
|
error-reset
|
Runs POST on all error resets.
|
power-on reset
|
Runs POST on every power on.
|
none
|
Does not run POST on reset.
|
|
Table 4 /HOST/diag
hw_change_level
|
|
max
|
Runs the maximum set of tests after a hardware change.
|
min
|
Runs the minimum set of tests after a hardware change.
|
|
Table 5 /HOST/diag
hw_change_verbosity
|
|
min
|
(default) — Displays the minimum level of output during the hardware change
tests.
|
max
|
Displays information for each step.
|
normal
|
Displays a moderate amount of information, including component names and test results.
|
debug
|
Displays extensive debugging information.
|
none
|
Disables the output.
|
|
Table 6 /HOST/diag
power_on_level
|
|
max
|
(default) — Runs the maximum set of tests.
|
min
|
Runs the minimum set of tests.
|
|
Table 7 /HOST/diag
power_on_verbosity
|
|
min
|
(default) — Displays the minimum level of output.
|
max
|
Displays information for each step.
|
normal
|
Displays a moderate amount of information, including component names and test results.
|
debug
|
Displays extensive debugging information.
|
none
|
Disables the output.
|
|
Table 8 /HOST/diag
error_reset_level
|
|
max
|
(default) — Runs the maximum set of tests.
|
min
|
Runs a minimum set of tests.
|
|
Table 9 /HOST/diag
error_reset_verbosity
|
|
min
|
(default) — Displays the minimum level of output.
|
max
|
Displays information for each step.
|
normal
|
Displays a moderate amount of information, including component names and test results.
|
debug
|
Displays extensive debugging information.
|
none
|
Disables the output.
|
|
Table 10 /HOST/diag
verbosity
|
|
normal
|
Displays all test and informational messages in POST output.
|
min
|
Displays functional tests with a banner and pinwheel in POST output.
|
max
|
Displays all test, informational, and some debugging messages in POST output.
|
debug
|
Displays extensive debugging information.
|
none
|
Does not display POST output.
|
|
This flowchart illustrates the same set of Oracle ILOM set command
variables.