Go to main content

SPARC T5-8 Server Service Manual

Exit Print View

Updated: February 2019
 
 

Install the Front I/O Assembly


Caution

Caution  - This procedure requires that you handle components that are sensitive to static discharge. Static discharges can cause the components to fail.


  1. Take the necessary ESD precautions.

    See Prevent ESD Damage.

  2. Insert the front I/O assembly into position in the main module.
    • Gently slide the front I/O assembly into position with the ports inserted into the port holes in the front of the main module.

    • Lower the rear of the front I/O assembly so that the captive screw is aligned with the screw hole on the motherboard.


    image:Graphic showing how to position the front I/O assembly.
  3. Tighten the retaining screw to secure the front I/O assembly to the motherboard.
    image:Graphic showing how to install the retaining screw for the front I/O assembly.
  4. Connect the cable.
  5. Install the main module back into the server.

    See Install the Main Module.

Related Information