The Updating Firmware icon indicates that the downloaded firmware is being updated on the Sun Ray Client. The following messages are also displayed:
Erasing flash. DO NOT POWER OFF!
Programming flash. DO NOT POWER OFF!
The Sun Ray Client reboots after updating the firmware.
Do not interrupt the firmware update. Interrupting the firmware update may make the Sun Ray Client unusable.
If there is an additional firmware update for the internal smart card controller, the
Updating Firmware icon is displayed again and the smart card LED flashes while the update
occurs. The following message is also displayed: Programming Smart Card Controller.
DO NOT POWER OFF!
. The Sun Ray Client reboots after updating the firmware for
the internal smart card controller.