The Firmware Download icon is displayed with a code or a message when an error occurs during a download of firmware. The following table lists the error codes. These error messages appear in English even in localized versions of Sun Ray Software.
Table 16.5, “Firmware Download Error Codes and Messages” lists the firmware download error codes and messages. Firmware download error codes are valid only with OSD icon 4.
Table 16.5 Firmware Download Error Codes and Messages
Error Code | Error Message |
|---|---|
E | FW Load: No server |
F | FW Load: Name too long |
G | FW Load: Bad read |
H | FW Load: Bad signature |
I | FW Load: Failed decompression |
J | FW Load: Invalid module type |
K | FW Load: Version mismatch |
L | FW Load: Not enough memory |
M | FW Load: Prevented by barrier |
N | FW Load: Invalid HW version |
O | FW Load: Flash write error |
The Firmware Download with a 4 error code icon is displayed when the Sun Ray Client fails to download new firmware. The message "FW Load: Prevented by barrier" indicates that the Sun Ray Client already has a later version of the firmware.
In the syslog, the following message indicates
that a barrier level has been set to prevent Sun Ray Clients from
downloading an earlier version of the firmware.
Firmware upgrade/downgrade not allowed! Barrier is 310 Firmware level is 0
Check /var/opt/SUNWut/log/messages to confirm
that your configuration is set up properly.
