System Messages: LIBTUX Catalog 6300-6399
|
6300 |
WARN: RM associated with this multi-threaded server does not support xa_end(TMMIGRATE), Transactions may not work correctly | |
|
Description |
This message is issued when a multi-threaded server is started. If the RM
associated with this server does not support the TMMIGRATE flag when calling
|
Action |
Contact your Oracle TUXEDO system Technical Support or your database system vendor.
The database system documentation may contain more information about
what flags can be used with the | |
6301 |
ERROR: Custom configuration error, error code val | |
|
Description |
Failed to set server custom configuration information. |
Action |
This is an internal error, please contact customer support. | |
6302 |
ERROR: Memory allocation failed! | |
|
Description |
An attempt to dynamically allocate memory from the operating system failed. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
6303 |
WARN: MAXQUEUELEN parameter is invalid with PER_REQUEST concurrency strategy, it will be ignored. | |
|
Description |
The optonal MAXQUEUELEN server parameter is specified for a CORBA server with concurrency strategy set to PER_REQUEST. This parameter is only valid for a CORBA server with concurrency strategy set to PER_OBJECT. This parameter will be ignored at runtime. |
Action |
Remove this parameter from the offending server entry in the UBBCONFIG file. | |
6304 |
WARN: MAXQUEUELEN parameter is invalid with TUXEDO server, it will be ignored. | |
|
Description |
The optional MAXQUEUELEN server parameter is specified for a TUXEDO server. This parameter only valid for a CORBA server with concurrency strategy set to PER_OBJKECT. This parameter will be ignored at runtime. |
Action |
Remove this parameter from the offending server entry in the UBBCONFIG file. | |
6305 |
ERROR: Fatal! Failed to select an inactive thread, corruption suspected, shutting server down! | |
|
Description |
The system detected a fatal error while trying to select an inactive thread from the thread pool that is configured in a multi-threaded server. |
Action |
This message is supplied when the server has found a condition which does not al low the server to continue operation. The most common cause is corrupted memory, but other conditions could also cause this behavior. The server will shut itself down. If you believe that the memory in the server has not been corrupted, contact your Oracle TUXEDO system Technical Support. | |
6306 |
ERROR: Fatal! Failed to allocate memory for message queue element, shutting server down! | |
|
Description |
An attempt to dynamically allocate memory from the operating system failed while trying to create a queue element for storing messages destined for an active thread in a multi-threaded server. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
6307 |
ERROR: The -L option is valid only for RPC (non-conversational) servers running in SHM mode with load balancing. | |
|
Description |
In order to use the server pool option -L, the server must not be a conversational server. |
Action |
Make sure the server is not conversational by specifying CONV=N in
the | |
See Also |
| |
6309 |
WARN: Access control violation - unknown user on LMID tried to access acl_type target | |
|
Description |
A client attempted to access a service, event, or queue for which it was not granted access via an access control list. The machine logical name LMID type of controlled resource acl_type and operation target target are printed. |
Action |
No action required. The access fails with an error and an event is generated. Further action may be required on the part of the security administrator. | |
6310 |
INFO: .SysACLPerm: unknown user on LMID tried to access acl_type target | |
|
Description |
A client attempted to access a service, event, or queue for which it was not granted access via an access control list. An event is generated giving the machine logical name LMID type of controlled resource acl_type and operation target target. |
Action |
No action required. The access fails with an error and an event is generated. Further action may be required on the part of the security administrator. | |
6311 |
ERROR: tpcall(authsvc) failed in init_sec_context, error | |
|
Description |
The native client or server was not able to initialize the security context with the authentication server. The error was error. |
Action |
Contact your AAA (authentication, authorization, auditing) security service provider. If you are using the default AAA security service from Oracle, contact Oracle Customer Support. Report error to technical support. | |
6312 |
ERROR: Invalid plugin size token passed:tokensize | |
|
Description |
In user defined security plugin, The input tolen size is chagned |
Action |
If you are using the default AAA security service from Oracle, contact Oracle Customer Support. | |
6313 |
WARN: Bulletin Board update error error_val | |
|
Description |
The Oracle TUXEDO system attempted to update the server table that resides in system shared memory. The update was not successful. Either the server information provided was invalid, or an attempted lock on the TUXEDO System/T bulletin board was unsuccessful. |
Action |
Contact your Oracle TUXEDO system Technical Support | |
6314 |
ERROR: Invalid message found, diagnostic=num1/num2/0xnum3/0xnum4/num5 | |
|
Description |
The Oracle TUXEDO system data deserialization encountered an unexpected condition. |
Action |
Contact your Oracle TUXEDO system Technical Support | |
6315 |
ERROR: Target codeset encoding name not defined in TPMBENC environment variable | |
|
Description |
The TPMBENC environment variable was not defined in the process environment. |
Action |
Check to make sure TPMBENC is correctly defined wherever codeset encoding conversion is expected. | |
6316 |
ERROR: Memory allocation failure during codeset encoding conversion. | |
|
Description |
An attempt dynamically to allocate memory from the operating system failed during an MBSTRING codeset encoding conversion attempt. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device. | |
6317 |
ERROR: Memory allocation failure during codeset encoding conversion. | |
|
Description |
An attempt dynamically to reallocate memory from the operating system failed during an MBSTRING codeset encoding conversion attempt. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device. | |
6318 |
WARN: TMNOTHREADS conflicts with BRTHREADS, ignoring TMNOTHREADS | |
|
Description |
This is informational, but categorized as a warning to highlight that if the TMNOTHREADS environment variable is set in conflict with BRTHREADS, TMNOTHREADS will have no effect on whether the BRIDGE operates in threaded mode or not. |
Action |
No action required. | |
See Also |
| |
6319 |
ERROR: Memory allocation failure during codeset encoding conversion. | |
|
Description |
An attempt dynamically to reallocate memory from the operating system failed during an MBSTRING codeset encoding conversion attempt. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device. | |
6320 |
ERROR: Memory allocation failure during codeset encoding conversion. | |
|
Description |
An attempt dynamically to allocate memory from the operating system failed during an FLD_MBSTRING codeset encoding conversion attempt. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device. | |
6321 |
ERROR: Memory allocation failure during codeset encoding conversion. | |
|
Description |
An attempt dynamically to reallocate memory from the operating system failed during an FLD_MBSTRING codeset encoding conversion attempt. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device. | |
6322 |
ERROR: encoding_name not found in list of valid codeset encoding names | |
|
Description |
The encoding contained in TPMBENC is not a valid name. |
Action |
Check that the TPMBENC is set to the codeset encoding name desired. If necessarycreate a chareset.alias file in the APPDIR and add this TPMBENC as an alias to a valid encoding name. | |
6323 |
ERROR: Source codeset encoding name not found on buffer | |
|
Description |
The typed buffer used did not have codeset encoding defined for it. |
Action |
Use tpsetmbenc() to add the codeset encoding name to this buffer. | |
6324 |
ERROR: The Kerberos plug-in doesn't support ISH. | |
|
Description |
The Kerberos plug-in can't be used with ISH together. |
Action |
Don't configure Kerberos plug-in when ISH will be used. | |
See Also |
| |
6325 |
ERROR: Client cannot obtain security credentials. | |
|
Description |
The Tuxedo client cannot obtain security credentials related Kerberos authentication. |
Action |
See the "GSSAPI/SSPI" related error messages in ULOG and get the Kerberos environment ready. If problem persists contact your Oracle Customer Support. | |
See Also |
| |
6326 |
ERROR: Client cannot obtain KAUTHSVR principal name. | |
|
Description |
The Tuxedo client cannot obtain KAUTHSVR principal name which is required for the Kerveros plug-in. |
Action |
Conigure the KAUTHSVR principal name correctly. | |
See Also |
| |
6331 |
ERROR: Invalid message found, diagnostic=num1/num2/0xnum3/0xnum4/num5 | |
|
Description |
The Oracle TUXEDO system data deserialization encountered an unexpected condition. |
Action |
Contact your Oracle TUXEDO system Technical Support |