ナビゲーションリンクをスキップ
Sun Storage Archive Manager 5.3 構成および管理ガイド
Sun QFS and Sun Storage Archive Manager 5.3 Information Library (日本語)
検索範囲:
このドキュメント
ライブラリ全体
Sun Storage Archive Manager 5.3 構成および管理ガイド
2012 年 6 月
Sun Storage Archive Manager 5.3 構成および管理ガイド
ドキュメントの情報
はじめに
1. SAM-QFS について
SAM-QFS のコンポーネント
アーカイブ処理
解放処理
書き込み処理
リサイクル処理
サポートされているストレージデバイス
SAM-Remote ソフトウェア
2. アーカイブ用のストレージデバイスの構成
タスクマップ: アーカイブ用のストレージデバイスの構成
アーカイブ用のテープデバイスの追加
構成情報が含まれているファイル
アーカイブ用のテープデバイスを追加する方法 (コマンド行)
アーカイブ用にテープドライブのインタフェースのターゲット ID と LUN を追加する方法 (コマンド行)
アーカイブ用のテープデバイスを追加する方法 (SAM-QFS Manager)
アーカイブ用のライブラリまたは光磁気ディスクドライブの追加
SAM-QFS Manager を使用して SCSI または FC 環境でデバイスサポートを構成する方法
直接接続ライブラリのデバイスサポートを構成する方法
直接接続ライブラリが初期化に失敗したあとの回復
構成の検証および実装
すべてのデバイスが構成されていることを検証して変更を実装する方法
st.conf
ファイルのエラーの処理
3. 追加の SAM-QFS 構成の実行
NFS クライアントシステムとファイルシステムの共有
ファイルシステムを NFS で共有する方法
ファイルシステムをクライアントにマウントする方法
defaults.conf
ファイルの編集
defaults.conf
で制御できる機能
バーコード
ドライブ時間値
デフォルト値をカスタマイズする方法
リモート通知機能の構成
リモート通知を有効にする方法
リモート通知を無効にする方法
管理者グループの追加
管理者グループを追加する方法
システムログを有効にする方法
その他の Sun ストレージ製品の構成
4. ネットワーク接続自動ライブラリのパラメータファイルの作成
ネットワーク接続自動ライブラリのパラメータファイルの作成
ネットワーク接続自動ライブラリのパラメータファイルを作成する方法
StorageTek ACSLS 接続自動ライブラリのパラメータファイルの構成
ADIC/Grau 自動ライブラリのパラメータファイルの構成
IBM 3494 自動ライブラリのパラメータファイルの構成
Sony ネットワーク接続自動ライブラリのパラメータファイルの構成
共有ドライブについて
5. ライブラリ内のドライブ順序の検査
ライブラリ内のドライブ順序の検査
フロントパネルがあるライブラリのドライブ順序を検査する方法
フロントパネルがないテープライブラリのドライブ順序を検査する方法
フロントパネルがない光磁気ライブラリのドライブ順序を検査する方法
ネットワーク接続ライブラリのドライブ順序を検査する方法
6. カタログの生成
カタログの生成
多くのボリュームがある自動ライブラリを生成する方法
少数のボリュームがある自動ライブラリを生成する方法
IBM 3494 自動ライブラリを生成する方法
StorageTek ACSLS 接続ライブラリを迅速に生成する方法
StorageTek ACSLS 接続自動ライブラリ: 一般的な問題とエラーメッセージ
StorageTek ACSLS パラメータファイルのエラー
StorageTek ACSLS ライブラリのエラー
VSN インポートのエラー
7. 自動ライブラリと手動でロードしたドライブの管理
ベンダー固有のライブラリ操作手順
リムーバブルメディアの動作を開始する方法
リムーバブルメディアの動作を停止する方法
自動ライブラリを起動する方法
自動ライブラリを停止する方法
カートリッジを手動でロードする方法
カートリッジを手動でアンロードする方法
カートリッジのラベル付けとラベル解除
テープのラベル付けまたは再ラベル付けを行う方法
光ディスクのラベル付けまたは再ラベル付けを行う方法
ボリュームを監査する方法
直接接続自動ライブラリを監査する方法
クリーニングカートリッジの使用
バーコード付きのクリーニングカートリッジを使用する方法
バーコードのないクリーニングカートリッジを使用する方法
クリーニングサイクル数をリセットする方法
クリーニングサイクル数を制限する方法
テープドライブを自動的にクリーニングする方法
テープドライブを手動でクリーニングする方法
メディアエラーをクリアする方法
詰まったカートリッジをドライブから取り出す方法
カタログの操作、カートリッジのインポート、およびカートリッジのエクスポート
エクスポート済みメディアの追跡 (ヒストリアン)
自動ライブラリからのインポートおよびエクスポートについて
メールボックスがあるライブラリからカートリッジをインポートする方法
メールボックスがあるライブラリからカートリッジをエクスポートする方法
メールボックスがないライブラリからカートリッジをインポートする方法
メールボックスがないライブラリからカートリッジをエクスポートする方法
ロード通知を有効にする方法
暗号化機能のあるドライブの使用
手動ロードドライブの操作
手動でロードされたデバイスにカートリッジをロードする方法
カートリッジをアンロードする方法
ライブラリカタログを表示する方法
8. ベンダー固有のライブラリの管理
StorageTek ACSLS 接続自動ライブラリ
テープをインポートする方法
メールボックスを使用してテープをエクスポートする方法
ADIC/Grau 自動ライブラリ
カートリッジをインポートする方法
カートリッジをエクスポートする方法
IBM 3584 UltraScalable テープライブラリ
カートリッジのインポート
ドライブのクリーニング
パーティション分割
カートリッジを論理ライブラリから取り出す方法
IBM 3494 ライブラリ
カートリッジをインポートする方法
カートリッジをエクスポートする方法
Sony 直接接続 8400 PetaSite 自動ライブラリ
テープをインポートする方法
メールボックススロットをストレージスロットとして使用しないでテープをエクスポートする方法
メールボックススロットをストレージスロットとして使用してテープをエクスポートする方法
カートリッジを別のスロットに移動する方法
Sony ネットワーク接続自動ライブラリ
カートリッジをインポートする方法
カートリッジをエクスポートする方法
9. アーカイブ処理について
アーカイブ動作の計画
プレビュー待ち行列
アーカイバデーモン
アーカイブ動作
手順 1: アーカイブするファイルの特定
継続アーカイブ
スキャンアーカイブ
手順 2: アーカイブリクエストの合成
手順 3: アーカイブリクエストのスケジューリング
ドライブの使用
ボリュームの使用
手順 4: アーカイブリクエスト内のファイルのアーカイブ
archiver -l
コマンドのデフォルトの出力例
アーカイブ動作のログファイルとイベントログ
データ検証
10. アーカイバの構成
archiver.cmd
ファイルについて
アーカイブ指示
アーカイブセット指示
コマンド行を使用して
archiver.cmd
ファイルを作成する方法
SAM-QFS Manager を使用して
archiver.cmd
ファイルを作成する方法
archiver.cmd
ファイルの例
ディスクアーカイブについて
diskvols.conf
ファイルについて
ディスクアーカイブ指示
アーカイブセットコピーパラメータの例外
アーカイブ指示の例外
リサイクル指示の例外
vsn
指示
clients
指示と
endclients
指示
-
recycle minobs
リサイクラ指示
クライアントホスト上でディスクアーカイブを有効にする方法
サーバーホスト上でディスクアーカイブを構成する方法
ディスクアーカイブを有効にする方法
ディスクアーカイブの例
例 1
例 2
例 3
11. アーカイブ指示 (
archiver.cmd
)
グローバルアーカイブ指示
archivemeta
指示: メタデータをアーカイブするかどうかの制御
archmax
指示: アーカイブファイルサイズの制御
bufsize
指示: アーカイババッファーサイズの設定
drives
指示: アーカイブに使用するドライブ数の制御
examine
指示: アーカイブスキャンの制御
interval
指示: アーカイブ間隔の指定
logfile
指示: アーカイバログファイルの指定
notify
指示: イベント通知スクリプトの名前変更
ovflmin
指示: ボリュームオーバーフローの制御
ボリュームオーバーフローの例
scanlist_squash
指示: スキャンリストの連結の制御
setarchdone
指示:
archdone
フラグ設定の制御
wait
指示: アーカイバ起動の遅延
ファイルシステム指示
fs
指示: ファイルシステムの指定
ファイルシステム指示としてのグローバル指示
アーカイブのコピー指示
-release
指示: アーカイブ後のディスク領域の解放
-norelease
指示: ディスク領域解放の遅延
-release
と
-norelease
の併用
アーカイブ経過時間の設定
自動アーカイブ解除
メタデータの複数コピーの指定
12. アーカイブセット指示 (archiver.cmd)
アーカイブセット指示について
アーカイブセット割り当て指示
ファイル経過時間の
search-criterion
引数:
-access
および
-nftv
ファイル経過時間の
search-criterion
引数:
-after
ファイルサイズの
search-criterion
引数:
-minsize
および
-maxsize
所有者およびグループの
search-criterion
引数:
-user
および
-group
パターンマッチングを使用したファイル名の
search-criterion
引数:
-name
regex
解放および書き込みの
file-attributes
引数:
-release
および
-stage
アーカイブセットのメンバーシップの衝突
アーカイブセットコピーパラメータ
アーカイブファイルサイズの制御:
-archmax
パラメータ
アーカイババッファーサイズの設定:
-bufsize
パラメータ
アーカイブリクエストに対するドライブ数の指定:
-drivemax
、
-drivemin
、および
-drives
ボリュームの容量の最大化:
-fillvsns
パラメータ
アーカイブバッファーロックの指定:
-lock
パラメータ
オフラインファイルのアーカイブのコピーの作成:
-offline_copy
パラメータ
リサイクルの指定
アーカイブファイルのソート:
-sort
および
-rsort
パラメータ
アーカイブ解除の制御
アーカイブファイルの書き込み方式の制御:
-tapenonstop
パラメータ
ボリュームの予約:
-reserve
パラメータ
アーカイブ優先順位の設定:
-priority
パラメータ
アーカイブのスケジューリング: -
startage
、
-startcount
、および
-startsize
パラメータ
VSN 関連付け指示
VSN プール指示
13. SAM-QFS でのデータ整合性の検証
DIV について
SAM-QFS で DIV を使用するための最小限のハードウェアおよびソフトウェア要件
SAM-QFS での DIV の構成
SAM-QFS で DIV を構成する方法
DIV の使用例
テープ検証 (
tpverify
) コマンド
テープ検証 (
tpverify
) コマンドの戻り値
14. 解放処理について
解放プロセス
リリーサの概念
経過時間
候補
優先順位
ウェイト
部分的解放
部分的解放と部分的書き込みについて
システム管理者オプションのサマリー
ユーザーオプションのサマリー
15. ステージャーの構成
書き込み処理について
stager.cmd
ファイルについて
stager.cmd
ファイルを作成する方法
drives
指示: 書き込みに使用するドライブ数の制御
bufsize
指示: 書き込みバッファーサイズの設定
logfile
指示: ログファイルの指定
maxactive
指示: 書き込みリクエスト数の指定
アーカイブセット割り当て指示: アーカイブセット内のすべてのファイルに対する書き込み属性の指定
copysel
指示: 書き込みのコピー順序の指定
プレビューリクエストの優先順位の決定
preview.cmd
ファイルについて
グローバルな VSN および経過時間の優先指示を設定する方法
グローバルまたはファイルシステム固有の境界値指示を設定する方法
プレビュー要求優先順位方式の設定
16. リサイクラの構成
リサイクルについて
リサイクルプロセス
リサイクルの計画
リサイクル方法
リサイクルの制御
リサイクラの起動
リムーバブルメディアカートリッジ上のリサイクルの構成
recycler.cmd
ファイルの作成
logfile
指示: ログファイルの指定
no_recycle
指示: リサイクルの防止
library
指示: 自動ライブラリに対するリサイクルの指定
-hwm
パラメータ
-mingain
パラメータ
-ignore
パラメータ
-mail
パラメータ
recycler.sh
ファイルの作成
ディスクアーカイブボリュームのリサイクルの構成
archiver.cmd
ファイルの編集
ディスクアーカイブのリサイクラログ
アーカイブコピー保持のリサイクル
17. SAM-QFS の高度なトピック
デバイスログ機能の使用方法
デバイスログを使用する状況
samset
コマンドを使用してデバイスログを有効にする方法
defaults.conf
ファイルを編集してデバイスログを有効にする方法
リムーバブルメディアファイルの使用方法
リムーバブルメディアファイルまたはボリュームオーバーフローファイルの作成
セグメント化ファイルの使用
セグメント化ファイルのアーカイブ処理
システムエラー機能レポートの使用方法
SEF レポートを有効にする方法
SEF レポート出力を生成する方法
SEF ログファイルの管理
SEF
sysevent
機能
SEF
sysevent
ハンドラを作成する方法
18. Sun SAM-Remote ソフトウェアの使用
Sun SAM-Remote ソフトウェアの概要
システム要件
ソフトウェアの制限事項
クライアントとサーバーの対話
Sun SAM-Remote サーバーの概要
Sun SAM-Remote クライアントの概要
Sun SAM-Remote サーバーと Sun SAM-Remote クライアントの対話
ライブラリカタログ
アーカイブ処理
Sun SAM-Remote ソフトウェアでのデータ整合性の検証
Sun SAM-Remote ソフトウェアの構成
手順 1: サーバーおよびクライアントにする予定のホストにログインする
手順 2: クライアントおよびサーバーのソフトウェアを確認する
手順 3: 各クライアントの
mcf
ファイルを編集する
手順 4: Sun SAM-Remote クライアント構成ファイルを作成する
手順 5: サーバーの
mcf
ファイルを編集する
手順 6: サーバーの構成ファイルを作成する
手順 7: アーカイブを有効にする
Sun SAM-Remote ソフトウェアによるリサイクル
Sun SAM-Remote 環境でのリサイクル (方法 1)
サーバーの構成ファイル
クライアント用の構成ファイル
リサイクルを構成する方法 (方法 1)
リサイクルを構成する方法の例 (方法 1)
no-data
VSN をリサイクルする方法
partially full
VSN をリサイクルする方法
Sun SAM-Remote 環境でのリサイクル (方法 2)
リサイクルを構成する方法 (方法 2)