Supported Components with A90-D or 7105379 Chassis

The Sun Blade X4-2B is currently supported for use in the A90-D or 7105379 Sun Blade 6000 Modular System chassis with the following configuration:

PCIe 2.0 midplane
Minimum supported chassis software release 4.2.3.

(Use CMM version 4.2.3 or above, earlier versions do not support Sun Blade X4-2B)

The following table lists the NEMs and storage modules supported by the A90-D or 7105379 chassis when the Sun Blade X4-2B is installed.

Note - If a server module or NEM is installed in the chassis that is not listed in the following tables, the component must be removed from the chassis before the Sun Blade X4-2B is installed.

Supported NEMs

Additional FEM and REM support might be required for each NEM. See FEMs and REMs Required for NEMs.

Sun Blade 6000 10p GbE Pass-Thru NEM (X4250A-N)
Sun Blade 6000 Ethernet Switched NEM 24p 10 GbE (X2073A-N)
Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM (X4338A, 4338A)

Note - The Sun Blade X4-2B Server Module supports Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM with very limited conditions including support for 1GbE ports only. 10GbE ports are not operational.
Note - See the chassis product notes for information on the CMM requirements for this NEM.

The following table lists the server modules supported by the A90-D or 7105379 chassis when the Sun Blade X4-2B is installed.

Note - If a server module is installed in the chassis that is not listed in the following table, it must be removed from the chassis before the Sun Blade X4-2B is installed.

Supported Server Modules
SPARC T3-1B SPARC T4-1B SPARC T5-1B Sun Blade X6270 M2 Sun Blade X6275 M2 GbE Sun Blade X6275 M2 10 GbE Sun Blade X3-2B Sun Blade X4-2B Sun Blade Storage Module M2 Note - The Sun Blade Storage Module M2 is not supported as a storage resource for the Sun Blade X4-2B.

Skip Navigation Links
Exit Print View
	Sun Blade X4-2B Product Notes