Sun Blade X4-2B Server Module Fails When Launching Remote Console (18962552)
Dual 16 Gigabit/Sec Fibre Channel / 10Gbps FCoE Host Adapter, Emulex
BIOS MPS Setting Added (18364710 and 18317148 and 15752501)
Do Not Use Operating System Tools or Utilities to Manage UEFI Boot Variables (15818528)
One DIMM in a Channel Has an Uncorrectable Error, Other DIMMs Might Have Errors (16181966)
Hot-plugging 2 PCIe EMs Can Cause Correctable Error Messages (15752501)
Do Not Reboot the SP and Host Simultaneously (16346073 and 17013976)
Oracle ILOM restore_status Parameter Shows Partial Status (7167938)
Oracle Recommendations for Drive Slot Population and Virtual Drive Creation (7124194)
PXE-booting Fails When Using Cisco Switch (7149683)
When Running an Emulex HBA in UEFI BIOS Boot Mode, the
Oracle System Assistant Issues
Sun Blade X4-2B Server Module does not support installation of Windows 2012 R2 / Windows 2012 on Ganymede-E FCoE target.
Windows 2012 R2/ Windows 2012 can not be installed on an FCoE target under the following conditions.
Oracle ILOM 3.2.4.24 r90698
BIOS 28.03.02.00
REM: SAS 2.0 RAID HBA PCIe LP 8-port
CPU: Intel(R) Xeon(R) CPU E5-2609 v2 2.50GHz
MEM: M386B4G70DM0-YK04 x 2
PEMs: Ganymede-E FCoE
Mode: Legacy mode
When you do the following: Mount Windows 2012 R2 to a LUM via ISO; change Ganymede-E FCoE port to the first boot device from boot list; and install Win2012 R2 via OSA so the system can see the FCoE LUN attached to Ganymede-E PEM. When you select a LUN to install, the system displays the following message: "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu", even if the PEM has already been enabled in BIOS setting.
Workaround
Install Windows2012 R2 on the same LUN via Ganymede-E FCoE PEM in UEFI boot mode.