Oracle® Application Integration Architecture Siebel CRM Integration Pack for Oracle Order Management: Order to Cash Implementation Guide Release 3.1.1 Part Number E20515-05 |
|
|
PDF · Mobi · ePub |
This chapter provides instructions about how to configure the Order to Cash: Siebel CRM - EBS pre-built integration. This includes configuring Siebel Customer Relationship Management (Siebel CRM) and Oracle E-Business Suite (Oracle EBS) as well as setting up organizations, inventory locations, Oracle Configurator, and so on.
This chapter includes the following sections:
Section 15.2, "Setting Up Organizations and Inventory Locations"
Section 15.3, "Setting Up Cross-References for Siebel IDs and Oracle EBS Entities"
Section 15.4, "Setting Up Additional Business Event Subscriptions"
Section 15.5, "Setting Up Application Context Definitions for Oracle EBS"
Section 15.13, "Configuring the Payment Authorization Integration"
Section 15.17, "Performing Post Installation Configurations"
After installing and configuring Siebel CRM and any required patches as described in the Oracle Application Integration Architecture Installation and Upgrade Guide for Pre-Built Integrations, "Software Requirements", perform the following configuration steps within your Siebel CRM system.
To configure Siebel CRM for the Order to Cash: Siebel CRM - EBS integration:
Follow these steps to configure the Oracle Fusion Middleware (FMW) URLs for the outbound web services in the Siebel CRM application.
Go to Site Map.
Click Administration - Web Services.
Click Outbound Web Service.
In the Name field of the web services applet, query for "*JMS* or *ABCS* or *ESB* or *ConfiguratorUserLangSiebelAdapter*". The results list 14 web services.
Of the results, consider the following services:
SyncCustomerSiebelEventAggregator
RequestProductStructureSiebelJMSProducer
ProcessSalesOrderSiebelJMSProducerV2 (for Siebel 8.0.0.x only)
CreditCheckSalesOrderSiebelReqABCSImplService
CalculateShippingChargeSalesOrderSiebelReqABCSImplService
PaymentAuthorizationSalesOrderSiebelReqABCSImplService
ProcessQuoteSiebelJMSProducer (for Siebel 8.0.0.x only)
CheckATPSalesOrderSiebelReqABCSImplService
ConfiguratorUserLangSiebelAdapter
ESB_ConfiguratorCopyConfigEbizAdapter_Service
Get the FMW URLs for these services. Update the Address column of the Service Port applet to point to the correct FMW server and port number. For example:
http://slc60034sems.us.oracle.com:8100/soa-infra/services/default/ CheckATPSalesOrderSiebelReqABCSImpl/CheckATPSalesOrderSiebelReqABCSImpl <table name="ORGANIZATION_ID">
Activate the workflows listed in Table 15-1.
Workflow Name | Status | Project |
---|---|---|
CZ PSP Interface |
New |
Web Service Integration |
Account - New Order |
Modified |
COM Workflows |
CZ Return |
New |
Web Service Integration |
Oracle Configurator Load |
New |
Web Service Integration |
Oracle Verify Complex Product All (Order) |
New |
Web Service Integration |
Oracle Verify Complex Product All (Quote) |
New |
Web Service Integration |
Oracle Verify Header (Order) |
New |
Web Service Integration |
Oracle Verify Header (Quote) |
New |
Web Service Integration |
Oracle Verify Item (Order) |
New |
Web Service Integration |
Oracle Verify Item (Quote) |
New |
Web Service Integration |
SWI Account Update Workflow |
New |
Web Service Integration |
SWI Address Update Workflow |
New |
Web Service Integration |
SWI Contact Update Workflow |
New |
Web Service Integration |
SWI External Product Sync Workflow |
New |
Web Service Integration |
SWIOrderUpsert |
New |
Web Service Integration |
SWIQuoteUpsert |
New |
Web Service Integration |
SWISendATPCheck |
New |
Web Service Integration |
SWISendATPCheckLine |
New |
Web Service Integration |
SWISendCalculateShippingCharge |
New |
Web Service Integration |
SWISendCreditCheck |
New |
Web Service Integration |
SWISendOrder |
New |
Web Service Integration |
SWISendPaymentAuthorization |
New |
Web Service Integration |
SWISendQuote |
New |
Web Service Integration |
Submit Order ASI |
New |
COM Workflows |
Submit Quote ASI |
New |
COM Workflows |
For more information about activating workflows, see Siebel Business Process Framework: Workflow Guide, available on Oracle Technology Network.
Enable the component groups listed in Table 15-2.
Table 15-2 Component Groups Listing
Component Group Name | Alias |
---|---|
Enterprise Application Integration |
EAI |
Siebel High Tech Industrial Manufacturing |
HTIM |
Siebel ISS |
ISS |
Workflow Management |
Workflow |
Siebel CME (Communications) is also supported.
For more information about enabling component groups, see Siebel System Administration Guide, available on Oracle Technology Network.
In Oracle EBS, an operating unit is a logical organization within a company that the company management decides to operate. Order transactions are owned by the operating unit organization.
The transactions for an operating unit are restricted to using the reference data for that same operating unit. That is. all the sales orders (transactional entity) are not only owned by the operating unit on the transaction side, but the reference data is also owned (namely.customer accounts or associated items).
Inventory Organizations in Oracle EBS represent manufacturing and storage facilities. Each inventory organization belongs to one parent operating unit. Oracle implements storage facilities, warehouses and distribution centers in inventory organizations.
To get inventory location details in Oracle EBS:
Log in to Oracle EBS.
Confirm that you have the Order Management (OM) responsibilities for the operating units of interest., as shown in Figure 15-1.
Perform the following steps for each of the OM responsibilities that are of interest to you:
Select the System Parameters menu item.
Query the system parameters, as shown in Figure 15-2.
Note the name of the item validation organization associated with the parameter item validation organization, for example, Vision Operations, Vision Germany, and Vision France.
The Business Unit organization in Siebel allows the implementation company to partition itself into logical groups. The information is then associated to the business unit, and can be viewed by only the end-users who are associated to that business unit (BU).
The transaction data in Siebel (namely Sales Order) is always associated to a business unit (the primary business unit). In Siebel, although an order is associated to a specific BU, products from different BUs can be associated on the order lines. In other words, unlike Oracle EBS, the reference data for a transaction can belong to a different organization in Siebel.
To map Siebel organizations to EBS operating units:
Log in to Siebel Applications.
Click Site Map.
Select Administration - Group, Organizations.
For the Oracle EBS operating units that you identified previously, create the same in Siebel CRM, as shown in Figure 15-3.
Note:
Create an organization record with name only. Leave the Site field blank.
In Siebel, Inventory Locations identify where products are stored and the source from which the product is fulfilled. An inventory location may be a warehouse, a field office, or it may be virtual location. An inventory location is also associated to a business unit.
To set up inventory locations in Siebel CRM:
Log in into Siebel Applications.
Click Site Map.
Select Inventory/All Inventory Locations across Organizations.
Note:
In Oracle, the IDs and names are shared among operating units and inventory organizations.
Create the inventory location using the same name that was identified in Oracle EBS, as shown in Figure 15-4.
Ensure that the organization and inventory location name in Siebel matches the names in Oracle EBS because the bulk load references them by name and not by ID.
You create cross-references after you create inventory locations both in Siebel CRM and in Oracle EBS. In Siebel CRM, you create inventory locations manually.
Log in to the Siebel database as the table owner.
Run the following query to get the IDs for the organizations created in the previous step:
select row_id, name from s_org_ext where name like '%Vision%'
Run the following query to get the IDs for the inventory locations created previously.
select row_id, name from s_invloc where name like '%Vision%')
To get the operating unit details:
Log in to the Oracle EBS database (Apps/Apps).
Identify the operating units that must be synchronized or maintained in Oracle EBS.
Log in to Oracle Applications and get the name for the operating units.
For example: Vision Operations (204), Vision Germany (888), Vision France (911)
To pick other operating units, use the following query:
select organization_id, name from hr_operating_units
To populate the initial date for cross-references
You must manually populate the ORGANIZATION_ID and INVENTORY_ LOCATION_ID cross-reference table after the install because no process flow exists for this synchronization. Manually add the data into this table using the sql insert statements. The ORGANIZATION_ID table holds the information for business units among the edge applications and the common value.
Sample sql statement (for ORGANIZATION_ID table):
EBIZ_01
INSERT INTO XREF_DATA (XREF_TABLE_NAME,XREF_COLUMN_NAME, ROW_NUMBER, VALUE, IS_DELETED, LAST_MODIFIED) VALUES ('oramds:/apps/AIAMetaData/xref/ORGANIZATION_ID.xref','EBIZ_01', 'ROWNUM_ORG_1', '204', 'N', SYSTIMESTAMP)
SEBL_01
INSERT INTO XREF_DATA (XREF_TABLE_NAME,XREF_COLUMN_NAME, ROW_NUMBER, VALUE, IS_DELETED, LAST_MODIFIED) VALUES ('oramds:/apps/AIAMetaData/xref/ORGANIZATION_ID.xref','SEBL_01', 'ROWNUM_ORG_1', '88-JKO29', 'N', SYSTIMESTAMP)
COMMON
INSERT INTO XREF_DATA (XREF_TABLE_NAME,XREF_COLUMN_NAME, ROW_NUMBER, VALUE, IS_DELETED, LAST_MODIFIED) VALUES ('oramds:/apps/AIAMetaData/xref/ORGANIZATION_ID.xref','COMMON', 'ROWNUM_ORG_1', '1001001', 'N', SYSTIMESTAMP)
For each set, which includes EBIZ_01, SEBL_01, and COMMON, the row numbers must be identical to link these records to each other.
For more information on populating cross-references, see the Oracle Fusion Middleware Developer's Guide for Oracle SOA Suite, "Working with Cross References".
To validate the cross-references:
Log in to the AIA XREF database.
Query the table XREF_DATA (as shown in Example 15-1) to confirm that every organization and every inventory location used in the XML files has three records.
Replace the value for the inventory locations and replace INVENTORY_LOCATION_ID with ORGANIZATION_ID for the operating units that you selected. (The number of operating units and inventory locations depends on your set up.)
For more information about cross-references, see Section 15.7, "Working with Cross-References."
In Oracle EBS, items are created in the master organization and assigned to inventory organizations from the item master organization. In the delivered integration, these default subscriptions were created for two events raised for item create and update:
oracle.apps.ego.item.postItemUpdate
oracle.apps.ego.item.postItemCreate
These subscriptions trigger the item sync flow for every item created or updated in any inventory organization. The integration flow itself only propagates the item created or updated to Siebel, if the inventory organization is mapped in the INVENTORY_LOCATIONS X-Ref table.
It is highly recommended to optimize the default subscriptions to only trigger the item create and update flows for the subset of inventory organizations relevant for order processing in the integration. Typically, this is the set of item validation organizations.
For more information about considerations for organization set up and use case scenarios, see Appendix B, "Organization Data Setup for Product Synchronization."
By default, the subscription for the two events mentioned previously, are processed by the PLSQL function: "aia_custom_subscription_pkg.aia_item_subscription". This package is created in Oracle EBS when the integration is deployed.
In addition, another PLSQL package titled aia_item_subscrpt_params_pkg specifies parameters used by the above subscription PLSQL package. The default source for this package is available in the $AIA_HOME/services/core/Ebiz/AdapterServices/CreateItemEbizEventConsumer/aia_item_subscription_params_pkg.sql file.
The following are the three variables in the aia_item_subscrpt_params_pkg package that must be modified.
g_validate_subscription
g_master_organization_id
g_itemValidationOrgs
Modify the three variables:
Set the g_validate_subscription value to either Y or N. \
N (default): This value implements the as delivered behavior. For example, the subscription triggers the item sync flow for every item created or updated in any inventory organization.
Y: The subscription triggers the item sync flow for only items that were created or updated in the master or item validation organizations specified in the other two variables.
Set the g_master_organization_id value to the Id of the item master organization. For example: g_master_organization_id NUMBER:=204;
Set the g_itemValidationOrgs value to the list of item validation org Ids. For example: g_itemValidationOrgs NumberList:=NumberList(204,911);
If you use the examples shown here, item creates and updates are synced for 204 and 911 organizations.
Recompile the aia_item_subscript_params_pkg package against the oracle EBS database (Applications schema).
This section describes how to set up the derivation of the context in flows in which Oracle EBS application programming interface (API) or service calls are made.
Application context (or API) for Oracle EBS calls are made up of three components:
Operating Unit
Username
Responsibility
Operating units should be mapped to the corresponding entities in other applications (such as business units in Siebel), as described in the "Setting Up Cross-References for Siebel IDs and Oracle EBS Entities" section, and cross-references in the ORGANIZATION_ID XREF table. In any flow in which the organization context of the source application is available in the flow and is mapped in the ORGANIZATION_ID XREF table, looking up the ORGANIZATION_ID XREF table derives the operating unit. If any context is not mapped or cannot be looked up, then a default is used. This default is set up in the following config property:
Property Name: TransformAppContextEbizService.DefaultOperatingUnit
Service Name: TransformAppcontextEbizService
If required, users can also create cross-references between applications using the USER_NAME XREF table. In any flow in which the user context of the source application is available and is mapped in the USER_NAME XREF table, looking up the USER_NAME XREF table derives the username for Oracle EBS. If any context is not mapped or cannot be looked up, then a default is used. This default is set up in the following config property:
Property Name: TransformAppContextEbizService.DefaultUser
Service Name: TransformAppcontextEbizService
Responsibilities should be mapped to the Oracle EBS user + operating unit combination. The responsibility should be valid with privileges to operate in the operating unit, and must be assigned to this user. This mapping is done in the ORACLE_RESPONSIBILITY DVM. The column EBIZ_USER_OU should have the concatenation of USER_NAME:ORGANIZATION_ID and the column EBIZ_RESP should have the corresponding responsibility to be used.
For example,
For the Quotes and the Orders integrations, you must change the run-time configuration in Siebel CRM to invoke the Oracle Configurator from Siebel CRM.
For more information about how to set up Siebel QF for ACR 508 see the instructions for Siebel 8.1.1.3 FP (MOS Article ID 880452.1).
You must make the following run-time configuration changes before you can launch Oracle Configurator.
To change the run-time configuration to invoke Oracle Configurator from Siebel CRM:
Log in to the Siebel HTIM application from a browser.
Go to site map, Administration Business process, Repository workflow process.
In the top applet, query for the workflows imported previously and activate them.
Ensure that they are in the active state by querying in the bottom applet.
Go to site map, Administration Order Management, Signals.
Query for the signal Customize.
Lock the signal record and click Workspace.
Change the service name to Oracle Configurator Load.
Navigate back to the Signals view and click the Release New Version button to release a new version of the signal.
Query for the signal QuotesAndOrdersValidate.
Lock the signal record and click Workspace.
Replace the Siebel Verification with Oracle Batch Validate. Change all four records with sequence #2:
Mode = Quote, Instance Type = Line Item - Change Service Name column to "Oracle Verify Item (Quote)"
Mode = Order, Instance Type = Line Item - Change Service Name column to "Oracle Verify Item (Order)"
Mode = Quote, Instance Type = Header - Change Service Name column to "Oracle Verify Header (Quote)"
Mode = Order, Instance Type = Header - Change Service Name column to "Oracle Verify Header (Quote)"
Go to site map, Administration Runtime Events, Events, and click Menu, Reload Runtime Events.
Go to site map, Administration - Application, Views.
Click New to add the following new views:
CZRuntimeInstanceView (JS)
CZRuntimeInstanceView (JS) - Agreement
CZRuntimeInstanceView (JS) - Order (Sales)
CZRuntimeInstanceView (JS) - Favorites
For each view, assign the appropriate responsibility so that users with that responsibility can navigate to this view.
Go to site map, Administration - Integration, WI Symbolic URL List.
From the top applet, select Host Administration from the available options menu.
Add a new host entry:
Host Name: <Oracle EBIZ host name:port number> (For example, qapache.us.oracle.com:3710)
Virtual Name: OracleConfigurator
Select Symbolic URL Administration and add a new record in the top applet:
Name: OracleCfgURL
Note:
This symbolic name is important because the server-side business component code relies on this name.
URL: http://OracleConfigurator/OA_HTML/CfgSebl.jsp
Select the host name, for example, qapache.us.oracle.com:3710.
Fixup Name: Default
SSO Disposition: IFRAME
Add the following arguments to the URL in the bottom applet:
Add another new row and enter the following information:
Implement steps g and h to set up the single sign-on (SSO) login to Oracle EBS.
The SSO login is the preferred mode of accessing Oracle EBS. If an SSO login is not set up, then the Siebel end user must enter Oracle login credentials at a login page. If SSO is going to be used, you must complete step 5.
For the next two arguments, enter the specified values for Argument Value.
UserLoginId and UserLoginPassword are function names used by Siebel SSO. These functions look up the Oracle login credentials for the current Siebel user. Entering any other value requires the user to log in to an Oracle Applications for Configurator session. In step 5, map the Siebel user to the Oracle login credentials.
Continue to add arguments to the same URL:
Add the final argument
Select SSO Systems Admin List and add a record in the top applet:
In the bottom applet, SSO System Users, add records for the Siebel users who invoke Oracle Configurator.
Pair the Siebel usernames with Oracle login credentials, for example:
Go to Site Map, Administration - Server Configuration - Components
Select the HTIM Object Manager (ENU) component. Select the Order Management - Enable Asset Based Ordering parameter, and set this value to False to invoke Oracle Configurator instead of calling Siebel Configurator.
You must activate the following workflows for Oracle Configurator to work. These workflows exist; they were introduced as part of the Oracle Configurator integration:
To copy Oracle Configurator Data Map setup:
Log in to the Siebel HTIM application from a browser.
Go to the site map and select Administration - Application, Data Map Administration.
For each of the following data maps, add the columns External Configurator Reference 1, External Configurator Reference 2, and External Configurator Reference 3 to both the Source column and the Destination column in the Data Map Field section of each.
Data Map Component specified in parentheses:
AutoAgreement(Data Map Component:Line Item)
AutoAgreeFromOrder(Data Map Component Name:Line Items)
CopyOrder(Data Map Component Name:Line Item)
CopyQuote(Data Map Component Name:Line Item)
OrderToTemplate(Data Map Component Name:Line Item)
QuoteToSalesOrder(Data Map Component Name:Line Item)
QuoteToServiceOrder(Data Map Component Name:Line Item)
QuoteToTemplate(Data Map Component Name:Line Item)
ReviseAgreement(Data Map Component Name:Line Item)
ReviseOrder(Data Map Component Name:Line Item)
ReviseQuote(Data Map Component Name:Line Item)
TemplateToOrder(Data Map Component Name:Line Item)
TemplateToQuote(Data Map Component Name:Line Item)
To set up the DoCompression parameter:
Stop the web server (that is, IIS) in the Siebel environment.
Back up the file D:\19924\eappweb\bin\eapps.cfg on the web server.
Note:
Folder D:\19924 is an example. Ensure that you refer to the eapps.cfg file in your installation.
Edit eapps.cfg.
Reset the DoCompression parameter in the [defaults] section.
It should now be DoCompression=FALSE.
Restart the web server.
You must create several custom Oracle Applications to allow models to be accessed from Siebel. These custom applications are used during the publication phase of the Oracle Configurator Model development cycle.
To add Siebel custom applications to Oracle applications:
Log in to Oracle Applications with the system administrator credentials.
Select Application, Register.
Forms start.
The Applications - Register form should appear.
If it does not, navigate to it.
Create three new entries, each with four values:
Siebel Quote Integration |SEBLQ | DUMMY_TOP | Provides integration between Siebel Quote and Oracle Configurator
Siebel Order Entry Integration | SEBLO | DUMMY_TOP | Provides integration between Siebel Order Entry and Oracle Configurator
Siebel Agreement Integration | SEBLA | DUMMY_TOP | Provides integration between Siebel Agreement and Oracle Configurator
You must add the new applications to the Oracle Configurator Publication Applicability list.
Change responsibility to Configurator Administrator.
Select Application to Publication Applicability List and add the applications.
This step runs a concurrent program. When the program runs, these new applications are available during model publication.
For more information about the process of developing models for calling applications, see the Oracle Configurator product documentation.
By default, Siebel Eligibility and Compatibility are not enabled when you launch Oracle Configurator from the Siebel CRM applications listed in the previous section.
To enable Eligibility and Compatibility in Oracle Configurator:
Modify the UI Definition settings for the UI of the configuration model to display both list and selling prices.
For details, see the Oracle Configurator Developer User's Guide.
Edit the servlet configuration file cz_init.txt and set the servlet property cz.activemodel as follows:
cz.activemodel=/lp|/dp|/ec|
If you previously enabled Eligibility and Compatibility and want to disable the functionality, set the cz.activemodel servlet property as follows:
cz.activemodel=/nolp|/nodp|/noec|
The pricing settings in the UI Definition do not have to be changed to disable Eligibility and Compatibility.
Specify how you want Oracle Configurator to process Eligibility and Compatibility violations.
Do this using either of the following cz.activemodel values:
ecv - Display violations as a validation failure
noecv - Display violations as an informational message
For example,
cz.activemodel=/lp|/dp|/ec|/ecv|
In this example, list and selling (net) prices are enabled, Eligibility and Compatibility are enabled, and violations are displayed as validation failures.
For more information about the cz.activemodel servlet property and the cz_init.txt file, see the Oracle Configurator Installation Guide.
To make the Oracle user interface look like the Siebel user interface:
Log in to the Oracle application and select Application Developer.
Select Application: Lookups Application Object Library Function.
Query for %LOOK%FEEL%
Add a new lookup value with the following entries in a new row for name, meaning, and description:
NAME: ABS-DESKTOP
MEANING: ABS Custom Look And Feel
DESCRIPTION: ABS Custom Look And Feel
Save the record and quit.
Change responsibility to System Administrator.
Select the Oracle Applications Look and Feel profile and apply the new look and feel by changing the profile value at the user or application level.
To solve problems viewing images, icons, and so forth from Oracle Configurator in Siebel:
Create an Apache alias to point to the cabo folder under $OA_HTML.
In the Oracle EBS server, modify the Apache configuration file named "apps.conf" by adding the following lines to the file:
Alias /cabo/ "/slot/ems1426/appmgr/xz1st102comn/html/cabo/" <Location /cabo/> ..Order allow,deny ..Allow from all </Location>
Restart the Oracle EBS Apache server.
Verify that the setup on the EBS server is correct:
Log on to Oracle EBS.
Add or navigate to the Responsibility Customizing Look and Feel Administrator.
On the Look and Feel Configuration page, select the Update Look and Feel option.
Verify that the Look and Feel Name = abs-desktop.
Select Next.
On the Customize Styles and Icons page, select the Grid component.
The correct images should appear on this page.
Clear the browser cache before performing any test on your computer.
Cross-references map and connect the records within the application network, and they enable these applications to communicate in the same language. The integration server stores the relationship in a persistent way so that others can refer to it.
For more information about cross-references, see Oracle Fusion Middleware Developer's Guide for Oracle SOA Suite, "Working with Cross References.
Table 15-3 lists the Order to Cash cross-references:
Table 15-3 Order to Cash Cross-References
Table | Column | Description | Usage |
---|---|---|---|
CUSTOMERPARTY_PARTYID |
EBIZ_01 |
Customer party IDs |
Lookup during sales order flow, lookup/populated during customer flow |
COMMON |
Populated by sales order/customer flow |
NA |
NA |
SEBL_01 |
NA |
NA |
|
CUSTOMERPARTY_ACCOUNTID |
EBIZ_01 |
Customer account IDs |
Lookup during sales order flow, lookup/populated during customer flow |
COMMON |
Populated by sales order/customer flow |
NA |
NA |
SEBL_01 |
Lookup during asset flow |
NA |
NA |
CUSTOMERPARTY_ADDRESSID |
EBIZ_01 |
Address (location) IDs |
Lookup during sales order flow, lookup/populated during customer flow |
COMMON |
Populated by sales order/customer flow |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
CUSTOMERPARTY_CONTACTID |
EBIZ_01 |
Contact/Person IDs |
Lookup during sales order flow, lookup/populated during customer flow |
COMMON |
Populated by sales order/customer flow |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
CUSTOMERPARTY_LOCATIONREFID |
EBIZ_01 |
Address (location) IDs |
Lookup during sales order flow, lookup/populated during customer flow |
COMMON |
Populated by sales order/customer flow |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
CUSTOMERPARTY_PARTYLOCATIONID |
EBIZ_01 |
Party address IDs |
Lookup during sales order flow, lookup/populated during customer flow |
COMMON |
Populated by sales order/customer flow |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
CUSTOMERPARTY_ACCOUNT_PHONECOMMID |
EBIZ_01 |
Account Phone contact points |
lookup/populated during customer flow |
COMMON |
NA |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
CUSTOMERPARTY_ACCOUNT_FAXCOMMID |
EBIZ_01 column |
Account Fax contact points |
lookup/populated during customer flow |
COMMON |
NA |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
CUSTOMERPARTY_ACCOUNT_WEBCOMMID |
EBIZ_01 column |
Account Email/Web contact points |
lookup/populated during customer flow |
COMMON |
NA |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
CUSTOMERPARTY_CONTACT_PHONECOMMID |
EBIZ_01 column |
Contact's Phone contact points |
lookup/populated during customer flow |
COMMON |
NA |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
CUSTOMERPARTY_CONTACT_FAXCOMMID |
EBIZ_01 |
Contact's Fax contact points |
lookup/populated during customer flow |
COMMON |
NA |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
CUSTOMERPARTY_CONTACT_EMAILCOMMID |
EBIZ_01 |
Contact's Email/Web contact points |
lookup/populated during customer flow |
COMMON |
NA |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
CUSTOMERPARTY_PARTYCONTACTID |
EBIZ_01 |
Party contact IDs |
Lookup during sales order flow, lookup/populated during customer flow |
COMMON NA |
NA |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
SALESORDER_ID |
EBIZ_01 |
Sales Order ID |
Populated by sales order flow |
COMMON |
NA |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
SALESORDER_LINEID |
EBIZ_01 |
Sales Order Line ID |
Populated by sales order flow |
COMMON |
NA |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
QUOTE_ID |
EBIZ_01 |
Quote ID |
Populated by sales order flow |
COMMON |
NA |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
QUOTE_LINEID |
EBIZ_01 |
Quote Line ID |
Populated by sales order flow |
COMMON |
NA |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
ORGANIZATION_ID |
EBIZ_01 |
Organization/Business Unit IDs |
Lookup during sales order/customer flow |
COMMON |
Lookup during asset flow |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
PRICELIST_ID |
EBIZ_01 |
Pricelist ID |
Lookup during sales order flow |
COMMON |
Populated by Price List bulk load |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
ITEM_ITEMID |
EBIZ_01 |
Item/Product ID |
Lookup during sales order flow |
COMMON |
Lookup during asset flow |
NA |
NA |
SEBL_01 |
NA |
NA |
NA |
INSTALLEDPRODUCT_ID |
EBIZ_01, COMMON, SEBL_01 |
Asset ID |
Populated by asset BPEL flow & bulk load |
INVENTORY_LOCATION_ID |
EBIZ_01,COMMON,SEBL_01 |
Inventory Location IDs |
Lookup by sync product & complex product flow & asset flow |
USER_NAME |
EBIZ_01,COMMON,SEBL_01 |
User names |
Lookup used by security context services |
DVMs are a standard feature of the Oracle SOA Suite. They enable you to equate lookup codes and other static values across applications, for example, FOOT and FT or US and USA.
DVMs are static in nature, though administrators can add additional maps as needed. Transactional business processes never update DVMs; they only read from them. DVMs are stored in XML files and cached in memory at run time.
DVM types are seeded for the Order to Cash flows, and administrators can extend the list of mapped values by adding more maps. The DVM data should be synchronized with what the participating applications use. This synchronization should occur before any initial loads are run or any incremental transactional flows are initiated.
Table 15-4 lists the DVMs for the Order to Cash: Siebel CRM - EBS integration:
Table 15-4 DVMs for Order to Cash: Siebel CRM - EBS
DVM Type | DVM Column Name | Comments |
---|---|---|
ADDRESS_COUNTRYID |
EBIZ_01, COMMON, SEBL_01 |
Country codes |
STATE |
EBIZ_01, COMMON, SEBL_01 |
State codes |
PROVINCE |
EBIZ_01, COMMON, SEBL_01 |
Province codes |
ADDRESS_COUNTRYSUBDIVID |
EBIZ_01, COMMON, SEBL_01 |
Subdivision codes |
ORDER_SOURCE_ID |
COMMON, EBIZ_01 |
Mapping for multiple sources of Order/Quote To import order sources and make them AIA-enabled, refer to Ebiz R12 Order Management Guide. |
ATPCHECK_STATUS |
EBIZ_01, COMMON, SEBL_01 |
Mapping of E-Business Suite ATP check codes to display messages |
CONTACT_SALUTATION |
EBIZ_01, COMMON, SEBL_01 |
Salutation (such as, Mr., Mrs., and so on) |
CUSTOMERPARTY_STATUSCODE |
EBIZ_01, COMMON, SEBL_01 |
Account status codes |
PHONENUMBER_TYPE |
EBIZ_01, COMMON, SEBL_01 |
Phone number type codes (such as home, work, mobile, fax, and so on) |
CONTACT_GENDERCODE |
EBIZ_01, COMMON, SEBL_01 |
Gender code |
PHONENUMBER_PURPOSE |
EBIZ_01, COMMON, SEBL_01 |
Phone number purpose (such as personal, business, and so on) |
SITEUSAGE_CODE |
EBIZ_01, COMMON, SEBL_01 |
Address site usage code (such as bill to, ship to, and so on) |
ITEM_TYPE |
EBIZ_01, COMMON, SEBL_01 |
Mapping of E-Business Suite Item Types to PIM or Siebel Product Types |
ITEM_BOM_ITEMTYPE_CODE |
EBIZ_01, COMMON, SEBL_01, PIM_01 |
Mapping of E-Business Suite BOM item type to Siebel structure types |
ORACLE_RESPONSIBILITY |
EBIZ_01, COMMON, SEBL_01 |
Mapping of Oracle context/organization to responsibility |
UNIT_OF_MEASURE |
EBIZ_01, COMMON, SEBL_01 |
Unit of measure codes |
INSTALLEDPRODUCT_STATUS |
EBIZ_01, COMMON, SEBL_01 |
Asset status codes |
FREIGHT_TERMS_CODE |
EBIZ_01, COMMON, SEBL_01 |
Freight terms |
SHIPPING_PRIORITY |
EBIZ_01, COMMON, SEBL_01 |
Shipping priority codes (such as 2 Day Service) |
SHIPPING_METHOD |
EBIZ_01, COMMON, SEBL_01 |
Shipping method codes |
CURRENCY_CODE |
EBIZ_01, COMMON, SEBL_01 |
Currency codes |
ORDER_CARRIER_TYPE_CODE |
EBIZ_01, COMMON, SEBL_01,GLOG_01 |
Carrier codes (such as FedEx, UPS, and so on) |
ORDER_STATUS |
EBIZ_01, COMMON, SEBL_01 |
Order and quote status codes |
ORDER_TYPE |
EBIZ_01, COMMON, SEBL_01 |
Type of order (such as sales order, RMA, quote, and so on) |
PAYMENT_TERM |
EBIZ_01, COMMON, SEBL_01 |
Terms of payment for an order (for example, Net30) |
ORDER_RETURN_REASON |
EBIZ_01, COMMON, SEBL_01 |
RMA return reason |
CREDITCARD_TYPE |
EBIZ_01, COMMON, SEBL_01 |
Credit card type codes (such as Visa, MC, and so on) |
ORDER_INTEGRATION_STATUS |
COMMON, SEBL_01 |
In sales order flow, integration status setting of the Siebel order or quote |
PRODUCT_STATUS |
EBIZ_01, COMMON, SEBL_01 |
Product status codes |
CREDITCHECK_STATUS |
EBIZ_01, COMMON, SEBL_01 |
Credit check code mapping (such as pass, fail) |
CREDITCARDAUTH_STATUS |
EBIZ_01, COMMON, SEBL_01 |
Credit card authorization code mapping (such as approved, rejected) |
CREDITCARD_EXPIRATIONMONTH |
EBIZ_01, COMMON, SEBL_01 |
Mapping of E-Business Suite months to Siebel months |
INSTALLEDPRODUCT_TYPE |
COMMON, EBIZ_01 |
Instance Type Code mapping of E-Business Suite |
ORDER_FREIGHT_TERMS_CODE |
EBIZ_01, COMMON, SEBL_01 |
Freight terms codes |
ORDER_CHANGE_REASON |
EBIZ_01, COMMON, SEBL_01 |
Holds the possible reasons that are applicable when an order is revised or canceled |
Mapping of Shipping Method Code
In E-Business suites, shipping method codes can be created as a combination of various keys such as Carrier Codes, Modes, Priority (service). Siebel has Carrier Codes and Shipping Method (Shipping Priority Codes), which get stored in the ORDER_CARIIER_TYPE_CODE and SHIPPING_PRIORITY DVMs respectively. DVM SHIPPING_METHOD stores all Oracle EBS codes (such as 000001_Federal Ex_A_2F, which has meaning Federal Express-Air-FedEx 2Day) and corresponding COMMON values. To map from Siebel to Oracle EBS Shipping method codes, SHIPPING_METHOD DVM stores COMMON values that can be in either of the following formats according to the way a shipping method code has been created in Oracle EBS application:
COMMON value of 'Carrier Type Code' DVM: COMMON value of 'Shipping Priority' DVM (such as FEDEX:2DAYSERVICE
Only COMMON value of 'Carrier Type Code' DVM (for Oracle EBS Shipping Method Code such as 'UPS')
Only COMMON value of 'Shipping Priority' DVM (for Oracle EBS Shipping Method Code such as 'Overnight')
In the AIA Order to Cash, the order flows use the logic according to the mapped Shipping Method Code from Siebel to Oracle EBS based on the values provided for Carrier Code and Shipping priority (Shipping Method) and vice versa from Oracle EBS to Siebel.
Mapping ATP Check Status Codes to Messages
In E-Business Suite, the result of the ATP Check is communicated back as a status code. To map these status codes to appropriate error messages, mappings must be established in the ATPCHECK_STATUS DVM. As delivered, mappings for the most common status codes are prepopulated.
The mapping that exists in E-Business Suite can be looked up in the E-Business Suite Lookup type MTL_DEMAND_INTERFACE_ERRORS.
Log in to the Oracle EBS Workflow Administrator responsibility and ensure that the following Business events and the corresponding subscriptions are enabled:
oracle.apps.csi.instance.update
oracle.apps.csi.instance.create
oracle.apps.ont.genesis.outbound.update
oracle.apps.ego.item.postItemUpdate
oracle.apps.ego.item.postItemCreate
oracle.apps.ego.item.postItemBulkload
oracle.apps.ar.hz.OrgCustBO.update
oracle.apps.ar.hz.OrgCustBO.create
oracle.apps.ar.hz.Party.merge
oracle.apps.ar.hz.CustAccount.merge
You create specific profile options for the Customer and Asset Management process integrations.
To set specific profile options for the Customer Management integration:
Log in to Oracle EBS using the system administrator responsibility.
Open the System Profile Values form.
Query these profile options and set the indicated values at the site level:
HZ: Execute API Callouts to All Events Enabled or Only Business Object Events Enabled (applicable to E-Business Suite 11.5.10.2)
HZ: Raise API Events to All Events Enabled or Only Business Object Events Enabled (applicable to E-Business Suite 12.1.1)
HZ: Format Business Object Business Events as Bulk to N
HZ: Generate Party Number to Yes
HZ: Generate Party Site Number to Yes
To configure receivables system options for the Customer Management integration:
Log in to Oracle EBS using the Receivables responsibility of the operating unit where customer records are being synced.
Open the System Options form under Setup > System and select the Trans and Customers tab.
Select the Automatic Customer Numbering and Automatic Site Numbering check boxes.
To set specific profile options for the Asset Management integration:
Log in to Oracle EBS using the System Administrator responsibility.
Open the System Profile Values form.
Query these profile options and set the indicated values at the site level:
CSI: Raise Business Event For Customer Owned Instances to Yes
CSI: Auto-split Instances During Instantiation to No
To configure Oracle EBS for constraints:
Navigate through Setup > Rules > Security > Processing Constraints.
Query for Order Management Application and Order Line entity in the Processing Constraints form.
Query for the constraint Delete of Line Not Allowed when:
Order line is Booked and order line is not an RLM Line
Order line is PO Approved
Clear the Constraint check box.
Save and close the form.
To create profile values for the Order Management integration post installation:
Log in to the EBS application and navigate to System Administrator. Select Profile, System.
Query for the profile OM: Create Account Information and change the site value to All.
Query for the following profiles and set the value to yes at site level:
OM: Roll Up Charges on Header Level for AIA Synch
OM: Roll Up Charges on Line Level for AIA Synch
OM: Roll Up Tax on Header Level for AIA Synch
Log in to the Oracle EBS application and navigate to Order Management Super User Responsibility.
Launch the Setup: System Parameters - Values form.
Change the value of the Customer Relationships parameter to All Customers.
To preserve a submitted selling price for an order line:
Define a line level, manual, overrideable, amount-pricing modifier (in Oracle Advanced Pricing setup).
Set the value of the system profile option OM: Price Adjustment Modifier for AIA Order Lines to the modifier defined in the step 1, at the site level.
You must schedule concurrent processes for the Customer Management integration.
For Trading Community Architecture (TCA), a concurrent program must be run to raise business events after data creation. Schedule the concurrent request TCA Business Object Events: Raise Events to run periodically. You can run this request manually.
Before running the TCA Business Object Events: Raise Events concurrent request for the very first time, ensure that the concurrent request TCA Business Object Events: Generate Infrastructure Programs is run first.
Schedule the concurrent request TCA Business Object Events: Cleanse Infrastructure program clean up to run once a day to purge the tracking table.
For the Shipping Charges integration to work successfully, you must set the following property in Oracle Transportation Management 5.5 CU5:
glog.integration.remoteQuery.wrapReplyInTransmission=1
For more information about the Shipping Charges integration, see Chapter 8, "Shipping Charges Integration Flow."
To configure the Payment Authorization integration:
Set IBY: ECAPP URL (IBY profile name) to:
http:// <host machine name.us.oracle.com>:<port number>/oa_servlets/ibyecapp
Log in to the Oracle EBS application and navigate to System Administrator, Profile, System
Query for IBY: ECAPP URL and change the value of:
"http://<host machine name.us.oracle.com>:<port number>/oa_servlets/ibyecapp" (Example: http qapache.us.oracle.com:3908/oa_servlets/ibyecapp)
Set the servlet base URL to:
http:// <host machine name.us.oracle.com>:<port number>/oa_servlets
Add the responsibility for the user (SYSADMIN).
Navigate to System Administrator, Security: User, Define, and query for User (SYSADMIN), and add the responsibility IPayment Payment Administrator.
Navigate to IPayment Payment Administrator, iPayment Administrator.
In iPayment, navigate to the Setup tab, Payment Systems tab, click the update icon of the SamplePaymentSystem and change the value for Servlet base URL to: http:// <host machine name.us.oracle.com>:<port number>/oa_servlets (Example: http://qapache.us.oracle.com:3908/oa_servlets)
For more information about setting up Oracle Order Management transaction types and sequence assignments, see Oracle EBS Order Management User Guide, "Simple Negotiation in Oracle Order Management."
Based on the roles defined for the services, the system sends email notifications if a service ends in error.
Table 15-5 lists the errors caused by the Order to Cash services.
Table 15-5 Errors Caused by Order to Cash Services
Error Code | Message Text |
---|---|
AIA_ERR_AIAO2C2_1001 |
Timeout while waiting for a response from the InterfaceCustomerToFulfillmentEBF service. |
AIA_ERR_AIAO2C2_1002 |
Timeout while waiting for a response from the InterfaceSalesOrderToCustomerEBFV2 service. |
AIA_ERR_AIAO2C2_1003 |
Timeout while waiting for a response from the CreateSalesOrder EBS service operation. |
AIA_ERR_AIAO2C2_1004 |
Timeout while waiting for a response from the UpdateSalesOrder EBS service operation. |
AIA_ERR_AIAO2C2_1005 |
This order has been synchronized. |
AIA_ERR_AIAO2C2_1006 |
Account could not be queried. Ensure that the account exists in the system, or review the setup. |
AIA_ERR_AIAO2C2_1007 |
Timeout while waiting for a response from the SyncCustomerPartyList EBS service operation. |
AIA_ERR_AIAO2C2_1008 |
Credit Check failed. Please contact your System Administrator. |
AIA_ERR_AIAO2C2_1009 |
Timeout occurred in UpdateItemInstanceEbizReqABCSImpl waiting for item instance creation |
For more information about the errors caused by Siebel CRM or Oracle EBS, see the documentation for that product.
For more information about AIA error handling, see the Oracle Fusion Middleware Infrastructure Components and Utilities User's Guide for Oracle Application Integration Architecture Foundation Pack "Setting Up Error Handling."
The system delivers the following roles and users as default values for issuing error notifications for the Order to Cash integration.
Role: OracleSiebelAdmin User: OracleSiebelAdminUser
Role: AIAIntegrationAdmin User: AIAIntegrationAdminUser
Role: OracleSiebelCSR User: OracleSiebelCSRUser
The default password set for all users is welcome1.
For more information about setting up error notifications using these values, see Oracle Fusion Middleware Infrastructure Components and Utilities User's Guide for Oracle Application Integration Architecture Foundation Pack, "Introduction to Oracle AIA Error Handling" and "Using Trace and Error Logs."
For more information about how services are mapped, see the My Oracle Support document: EBO Implementation Maps (EIMs) 1095494.1.
Set these properties in the AIAConfigurationProperties.xml file. The file is located in AIA_HOME>/aia_instances/$INSTANCE_NAME/AIAMetaData/config/.
For more information about requirements for working with AIAConfigurationProperties.xml, see Oracle Fusion Middleware Developer's Guide for Oracle Application Integration Architecture Foundation Pack, “Building AIA Integration Flows,” How to Set Up AIA Workstation.
Table 15-6 shows settings for the system properties:
Table 15-6 Settings: System Properties
System Property | Value/Default Value | Description |
---|---|---|
O2C.EnablePriceListMapping |
true/false Default = false |
Enable/disable mapping and validation of pricelist during order & quote processing. |
Table 15-7 shows settings for the module level properties.
Table 15-7 Settings: Module -Level Properties
Module | Property | Value/Default Value | Description |
---|---|---|---|
Siebel |
SEBL_01.SERVER_TIMEZONE |
GMT-08:00 |
Time zone code of Siebel Server |
Siebel |
SEBL_01.UTCCanonicalFlag |
false |
Determines when the date format is in UTC or not. Set this to true if UTC is enabled on the Siebel Application. Else set to false. |
Siebel |
ComplexXrefKeyDelimiter |
: |
Delimiter for concatenating Ids in XREF data. Set this to any character (non-system type) that is not used for creating Ids in the Siebel Application. |
BULKLOAD |
BULKLOAD.DEFAULT.SOURCE |
No default value |
Ebiz system code (defined in OER), which is the source application for initial loads |
BULKLOAD.DEFAULT.TARGET |
No default value |
Siebel system code (defined in OER), which is the target application for initial loads |
NA |
Ebiz |
EBIZ_01.SERVER_TIMEZONE |
No default value |
Time zone code |
Table 15-8shows settings for the InterfaceCustomerToFulfillmentEBF service property:
Table 15-8 Settings: InterfaceCustomerToFulfillmentEBF Service Property
Property Name | Value/Default Value | Description |
---|---|---|
SyncCustomerPartyListResponseRequired |
true/false, Default = true |
Standard properties to control EBF functionality |
InterfaceCustomerToFulfillment |
true/false Default = true |
Standard properties to control EBF functionality |
ProcessCustomerPartyList |
true/false Default = true |
Standard properties to control EBF functionality |
SyncCustomerPartyList.AsyncTimeoutDuration |
Default value = PT5M |
Specifies the time for which the service waits to receive a response. If response is not received within this time, the process times out and terminates. |
Routing.CustomerPartyEBSV2.SyncCustomerPartyList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.CustomerPartyEBSV2.QueryCustomerPartyList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.CustomerPartyOrchestrationResponseEBSV2.InterfaceCustomerToFulfillmentResponse.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.CustomerPartyOrchestrationResponseEBSV2.InterfaceCustomerToFulfillmentResponse.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.CustomerPartyEBSV2.QueryCustomerPartyList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderOrchestrationResponseEBSV2.InterfaceCustomerToFulfillmentResponse.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.CustomerPartyEBSV2.SyncCustomerPartyList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.CustomerPartyEBSV2.QueryCustomerPartyList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.CustomerPartyOrchestrationResponseEBSV2.InterfaceCustomerToFulfillmentResponse.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Table 15-9shows settings for the SyncAccountSiebelReqABCSImpl service property:
Table 15-9 Settings: SyncAccountSiebelReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
No default value |
Siebel system code (like SEBL_01, defined in OER) from which requests originate for this process |
Routing.CustomerPartyEBSV2.SyncCustomerPartyList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.CustomerPartyEBSV2.SyncCustomerPartyList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.CustomerPartyEBSV2.SyncCustomerPartyList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
ABCSExtension.PreXformABMtoEBMABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeEBSEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Account.ProcessUpdateEventsOnly |
True |
This property governs whether create events raised in the Siebel application are consumed. By default, only update events are consumed. |
Routing.SWICustomerParty.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=WebService&SWEExtCmd= Execute&WSSOAP=1 |
Siebel SWICustomerPartyService (Query) service endpoint location. This is a SOAP endpoint URL. If the request message contains the target URL, then that takes precedence. |
Routing.SWICustomerParty.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SWICustomerParty.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Table 15-10 shows settings for the SyncCustomerPartyListEbizReqABCSImpl service property:
Table 15-10 Settings: SyncCustomerPartyListEbizReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
No default value |
Ebiz system code (like EBIZ_01, defined in OER) from which requests originate for this process |
Routing.QueryCustomerPartyListEbizCreate.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QueryCustomerPartyListEbizCreate.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property |
Routing.QueryCustomerPartyListEbizCreate.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryCustomerPartyListEbizCreateAdapter/QueryCustomerPartyListEbizCreateAdapter_ep |
Endpoint URI of the Ebiz adapter |
Routing.QueryCustomerPartyListEbizUpdate.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QueryCustomerPartyListEbizUpdate.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.QueryCustomerPartyListEbizUpdate.EBIZ_01.EndpointURI r |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryCustomerPartyListEbizUpdateAdapter/QueryCustomerPartyListEbizUpdateAdapter_ep |
Endpoint URI of the Ebiz adapter |
Routing.CustomerPartyEBSV2.SyncCustomerPartyList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.CustomerPartyEBSV2.SyncCustomerPartyList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.CustomerPartyEBSV2.SyncCustomerPartyList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
ABCSExtension.PreXformCreateABMtoEBMABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreXformUpdateABMtoEBMABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeCustEBSEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-11 shows settings for the QueryCustomerPartyListSiebelProvABCSImplV2 service property:
Table 15-11 Settings: QueryCustomerPartyListSiebelProvABCSImplV2 Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
No default value |
Siebel system code (such as SEBL_01, defined in OER) from which data is queried by this process |
Routing.SWI_spcCustomer_spcParty_spcService.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=WebService&SWEExtCmd= Execute&WSSOAP=1 |
Siebel SWICustomerPartyService (Query) service endpoint location. This is a SOAP endpoint URL. If the request message contains the target URL, then that takes precedence. |
Routing.SWI_spcCustomer_spcParty_spcService.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SWI_spcCustomer_spcParty_spcService.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
ABCSExtension.PreXformEBMtoABMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeSWICustServiceABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeSWICustServiceABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMtoEBMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-12 shows settings for the SyncCustomerPartyListEbizProvABCSImpl service property:
Table 15-12 Settings: SyncCustomerPartyListEbizProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
No default value |
Ebiz system code (such as EBIZ_01, defined in OER) to which data is synced. The System code value present in the enterprise business message (EBM) header of the incoming message takes precedence over this property value. |
Routing.SyncCustomerPartyListEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/SyncCustomerPartyListEbizAdapter/SyncCustomerPartyListEbizAdapter_ep |
Endpoint URI of the Ebiz adapter |
Routing.SyncCustomerPartyListEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.SyncCustomerPartyListEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.CustomerPartyResponseEBSV2.SyncCustomerPartyListResponse.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.CustomerPartyResponseEBSV2.SyncCustomerPartyListResponse.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.CustomerPartyResponseEBSV2.SyncCustomerPartyListResponse.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
ABCSExtension.PreXformEBMtoABMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMtoEBMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-13 shows settings for the SyncCustomerPartyListSiebelProvABCSImpl service property:
Table 15-13 Settings: SyncCustomerPartyListSiebelProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
No default value |
Siebel system code (such as SEBL_01, defined in OER) to which data is synced. The System code value present in the EBM header of the incoming message takes precedence over this property value. |
Routing.SyncCustomerPartyListSiebelService.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=WebService&SWEExtCmd= Execute&WSSOAP=1 |
Siebel SWICustomerPartyService(Upsert) service endpoint location. This is a SOAP endpoint URL. If the request message contains the target URL, then that takes precedence. |
Routing.SyncCustomerPartyListSiebelService.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SyncCustomerPartyListSiebelService.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.MergeCustomerPartyListSiebelService.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=WebService&SWEExtCmd= Execute&WSSOAP=1 |
Siebel SWICustomerPartyService(Merge) service endpoint location. This is a SOAP endpoint URL. If the request message contains the target URL, then that takes precedence. |
Routing.MergeCustomerPartyListSiebelService.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.MergeCustomerPartyListSiebelService.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.CustomerPartyEBSV2.SyncCustomerPartyListResponse.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.CustomerPartyEBSV2.SyncCustomerPartyListResponse.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.CustomerPartyEBSV2.SyncCustomerPartyListResponse.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.CustomerPartyResponseEBSV2.SyncCustomerPartyListResponse.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
ABCSExtension.PreXformEBMtoABMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeSWICustSyncServiceABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeSWICustUpsertServiceABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeSWICustSyncServiceABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeSWICustUpsertServiceABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-14 shows settings for the MergeAccountEbizReqABCSImpl service property:
Table 15-14 Settings: MergeAccountEbizReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
No default value |
Ebiz system code (such as EBIZ_01, defined in OER) from which requests originate for this process. |
Routing.QueryMergeAccountEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryMergeAccountEbizAdapter/QueryMergeAccountEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.QueryMergeAccountEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QueryMergeAccountEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.QueryCustomerPartyEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryCustomerPartyEbizAdapter/QueryCustomerPartyEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.QueryCustomerPartyEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QueryCustomerPartyEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.CustomerPartyEBS.SyncCustomerPartyList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.CustomerPartyEBS.SyncCustomerPartyList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.CustomerPartyEBS.SyncCustomerPartyList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes to the target service. |
ABCSExtension.PreXformSyncAcctABMToEBMABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreXformMergeAcctABMToEBMABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeCustPartyEBSEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-15 shows settings for the MergePartyEbizReqABCSImpl service property:
Table 15-15 Settings: MergePartyEbizReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
No default value |
Ebiz system code (such as EBIZ_01, defined in OER) from which requests originate for this process. |
Routing.QueryPartyMergeEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryPartyMergeEbizAdapter/QueryPartyMergeEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.QueryPartyMergeEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QueryPartyMergeEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.QueryMergeOrgCustEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryMergeOrgCustEbizAdapter/QueryMergeOrgCustEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.QueryMergeOrgCustEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QueryMergeOrgCustEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.QueryRelatedOrgCustEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryRelatedOrgCustEbizAdapter/QueryRelatedOrgCustEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.QueryRelatedOrgCustEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QueryRelatedOrgCustEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.CustomerPartyEBS.SyncCustomerPartyList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.CustomerPartyEBS.SyncCustomerPartyList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.CustomerPartyEBS.SyncCustomerPartyList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
ABCSExtension.PreXformABMToEBMABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreXformRelatedABMToEBMABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeSyncCustomerPartyEBSEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-16 shows settings for the InterfaceSalesOrderToFulfillmentEBF service property:
Table 15-16 Settings: InterfaceSalesOrderToFulfillmentEBF Service Property
Property Name | Value/Default Value | Description |
---|---|---|
InterfaceSalesOrderToCustomerResponseRequired |
true/false Default = true |
Standard properties to control EBF functionality. |
Routing.SalesOrderEBSV2.SyncSalesOrderList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS EndpointURI property. |
Routing.SalesOrderEBSV2.SyncSalesOrderList.CAVS.EndpointURI |
true/false Default = false |
CAVS Endpoint URI, when CAVS is enabled. |
isLegacyEbizProviderSupported |
true/false Default = false |
Governs whether the SyncSalesOrderEbizProvABCSImpl or CreateSalesOrderEbizProvABCSImpl is used. Default value is false, which uses SyncSalesOrderEbizProvABCSImpl service. |
InterfaceSalesOrderToCustomer |
True |
Controls whether the InterfaceSalesOrderToCustomerEBF is invoked during order processing. |
UpdateSalesOrder |
True |
Governs whether Update Order operation has to perform to update the sales order back in the source system during order processing. |
RMAOrderTypes |
RMA |
List of values for RMA order types. During processing of orders with this type, Customer sync does not occur. This is a comma-separated (no spaces) list of string values. |
InterfaceSalesOrderToCustomer.AsyncTimeoutDuration |
PT5M30S |
Specifies the time for which the service waits to receive a response. If response is not received within this time, the process times out and terminates. Duration to wait for the asynchronous callback from the InterfaceSalesOrderToCustomer service. If response is not received within the wait duration, a fault occurs. |
CreateSalesOrder.AsyncTimeoutDuration |
PT3M |
Specifies the time for which the service waits to receive a response. If response is not received within this time, the process times out and terminates. Duration to wait for the asynchronous CreateSalesOrderResponse callback from the SalesOrderResponseEBS service. If response is not received within the wait duration, a fault occurs. |
UpdateSalesOrder.AsyncTimeoutDuration |
PT1M |
Specifies the time for which the service waits to receive a response. If response is not received within this time, the process times out and terminates. Duration to wait for the asynchronous UpdateSalesOrderResponse callback from the SalesOrderResponseEBS service. If response is not received within the wait duration, a fault occurs. |
Routing.SalesOrderEBSV2.CreateSalesOrder.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderEBSV2.CreateSalesOrder.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.SalesOrderEBSV2.UpdateSalesOrder.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderEBSV2.UpdateSalesOrder.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.SalesOrderOrchestrationEBSV2.InterfaceSalesOrderToCustomer.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI.property. |
Routing.SalesOrderOrchestrationEBSV2.InterfaceSalesOrderToCustomer.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.SalesOrderOrchestrationResponseEBSV2.InterfaceSalesOrderToFulfillmentResponse.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderOrchestrationResponseEBSV2.InterfaceSalesOrderToFulfillmentResponse.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Table 15-17 shows settings for the InterfaceSalesOrderToCustomerEBFV2 service property:
Table 15-17 Settings: InterfaceSalesOrderToCustomerEBFV2 Service Property
Property Name | Value/Default Value | Description |
---|---|---|
InterfaceCustomerToFulfillmentResponseRequired |
true/false Default = false |
Standard properties to control EBF functionality. |
Routing.CustomerPartyOrchestrationEBSV2.InterfaceCustomerToFulfillment.RouteTo CAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.CustomerPartyOrchestrationEBSV2.InterfaceCustomerToFulfillment.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.SalesOrderOrchestrationResponseEBSV2.InterfaceSalesOrderToCustomerResponse.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderOrchestrationResponseEBSV2.InterfaceSalesOrderToCustomerResponse.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
InterfaceCustomerToFulfillment.AsyncTimeoutDuration |
PT5M |
Specifies the time for which the service waits to receive a response. If response is not received within this time, the process times out and terminates. Duration to wait for the asynchronous InterfaceCustomerToFulfillmentResponse callback from the SalesOrderOrchestrationResponseEBS service. If response is not received within the wait duration, a fault occurs. |
Table 15-18 shows settings for the ProcessSalesOrderSiebelReqABCSImplV2 service property:
Table 15-18 Settings: ProcessOrderSiebelReqABCSImplV2 Service Property
Property Name | Value/Default Value | Description |
---|---|---|
- SEBL_01.ApplicationVersion |
$siebel.version (example, 8.1.1.x or 8.0.0.x) |
Takes Siebel version values provided while you are installing the integration based on which it calls the respective web service version in Siebel. |
Routing.SBLOrderUpsertService.SEBL_01.EndpointURI |
Siebel SBLOrderUpsert service endpoint location (example, Siebel version 8.0.7 endpoint location). |
This is a SOAP endpoint URL. If the request message contains the target URL, then that takes precedence. |
Routing.SBLOrderUpsertService.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SBLOrderUpsertService.CAVS.EndpointURI |
true/false Default = false |
CAVS Endpoint URI, when CAVS is enabled. |
isResponseRequired |
true/false Default = true |
Governs whether responseCode should be populated in EBM indicating that EBF (example, InterfaceSalesOrderToFulfillment) should return the response. |
Default.SystemID |
SEBL_01 |
Siebel system code (such as SEBL_01, defined in OER) from which requests originate for this process. |
Routing.SalesOrderOrchestrationEBSV2.ProcessSalesOrder.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderOrchestrationEBSV2.ProcessSalesOrder.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.SWIOrderUpsert.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=SecureWebService&SWEExtCmd= Execute&WSSOAP=1 |
Siebel SWIOrderUpsert service endpoint location. This is a SOAP endpoint URL. If the request message contains the target URL, then that takes precedence. |
Routing.SWIOrderUpsert.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SWIOrderUpsert.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
ABCSExtension.PreXformABMtoEBMABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeEBSEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
RMAOrderTypes |
RMA |
Defines the value for RMA order types. This is a list of code values that represent RMA order type, which affects the attribute mappings. This is a comma-separated (no spaces) list of string values. |
Table 15-19 shows settings for the ProcessQuoteSiebelReqABCSImpl service property:
Table 15-19 Settings: ProcessQuoteSiebe;ReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
isResponseRequired |
true/false Default = false |
Governs whether responseCode should be populated in EBM indicating that EBF (example, InterfaceSalesOrderToFulfillment) should return the response. |
Default.SystemID |
SEBL_01 |
Siebel system code (such as SEBL_01, defined in OER) from which requests originate for this process. |
Routing.SalesOrderOrchestrationEBSV2.ProcessSalesOrder.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderOrchestrationEBSV2.ProcessSalesOrder.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.SWIQuoteUpsert.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SWIQuoteUpsert.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=SecureWebService&SWEExtCmd= Execute&WSSOAP=1 |
Siebel SWIQuoteUpsert service endpoint location. This is a SOAP endpoint URL. If the request message contains the target URL, then that takes precedence. |
Routing.SWIQuoteUpsert.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
ABCSExtension.PreXformABMtoEBMABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeEBSEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-20 shows settings for the UpdateSalesOrderEbizReqABCSImpl service property:
Table 15-20 Settings: UpdateSalesOrderEbizReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
IsOrderLineShippingDetailsRequired |
true/false Default = true |
Flag for specifying whether synching shipping details for a order line gets shipped |
Routing.ShipmentAdviceEBS.SyncShipmentAdviceList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ShipmentAdviceEBS.SyncShipmentAdviceList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.GetSalesOrderLineShippingDetailsEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.GetSalesOrderLineShippingDetailsEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/GetSalesOrderLineShippingDetailsEbizAdapter/GetSalesOrderLineShippingDetailsEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
ABCSExtension.PreXformOutputParametersToSyncShipmentAdviceListEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked |
ABCSExtension.PreInvokeShipmentAdviceEBS |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) from which requests originate for this process. |
Routing.SalesOrderEBSV2.UpdateSalesOrder.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderEBSV2.UpdateSalesOrder.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.GetSalesOrderEbizAdpater.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.GetSalesOrderEbizAdpater.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/GetSalesOrderEbizAdapter/GetSalesOrderEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.GetSalesOrderEbizAdpater.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.GetItemValidationOrgEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.GetItemValidationOrgEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/GetItemValidationOrganizationOUEbizAdapter/GetItemValidationOrganizationOUEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.GetItemValidationOrgEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
XRefCheck.IntervalSleepTimeMilliseconds |
5000 |
Specifies the interval time for which the service sleeps to check whether xref has been populated during create order process. |
XRefCheck.TotalWaitTime |
PT30S |
Specifies the total wait time for which the service waits regardless of whether xref has been populated during Create Order process. |
ABCSExtension.PreXformOutputParametersToUpdateSalesOrderEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeSalesOrderEBS |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-21shows settings for the UpdateSalesOrderSiebelProvABCSImpl service property:
Table 15-21 Settings: Update SalesOrderSiebelProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
SyncNewChildLine |
true/false Default = false |
To activate or inactivate the behavior that specifies whether to sync new child component lines for example, in case of BOM split child lines or included item line sync. |
SEBL_01.ApplicationVersion |
$siebel.version (example, 8.1.1.x or 8.0.0.x) |
Takes Siebel version values provided while you are installing the integration based on which it calls the respective web service version in Siebel. |
Routing.SBLOrderUpsertService.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=SecureWebService&SWEExtCmd= Execute&WSSOAP=1 |
Siebel SBLOrderUpsert service endpoint location. This is a SOAP endpoint URL. If the request message contains the target URL, then that takes precedence. |
Routing.SBLOrderUpsertService.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SBLOrderUpsertService.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
ABCSExtension.PreInvokeSWIOrderUpsertABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeSWIOrderUpsertABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Default.SystemID |
SEBL_01 |
Siebel system code (such as SEBL_01, defined in OER) from which requests originate for this process. |
Routing.SWIOrderUpsertService.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=SecureWebService&SWEExtCmd= Execute&WSSOAP=1 |
Siebel SWIOrderUpsert service endpoint location. This is a SOAP endpoint URL. If the request message contains the target URL, then that takes precedence. |
Routing.SWIOrderUpsertService.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SWIOrderUpsertService.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.SWIQuoteUpsertService.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=SecureWebService&SWEExtCmd= Execute&WSSOAP=1 |
Siebel SWIQuoteUpsert service endpoint location. This is a SOAP endpoint URL. If the request message contains the target URL, then that takes precedence. |
Routing.SWIQuoteUpsertService.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SWIQuoteUpsertService.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.SalesOrderResponseEBSV2.UpdateSalesOrderResponse.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderResponseEBSV2.UpdateSalesOrderResponse.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
ABCSExtension.PreXformEBMtoABMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeSBLOrderUpsertABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeSBLQuoteUpsertABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeSBLOrderUpsertABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeSBLQuoteUpsertABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMtoEBMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-22 shows settings for the CreateSalesOrderEbizProvABCSImpl service property:
Table 15-22 Settings: CreateSalesOrderEbizProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) from which requests originate for this process. |
Routing.ProcessSalesOrderEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/ProcessSalesOrderEbizAdapter/ProcessSalesOrderEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.ProcessSalesOrderEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ProcessSalesOrderEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.SalesOrderResponseEBSV2.CreateSalesOrderResponse.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderResponseEBSV2.CreateSalesOrderResponse.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
RMAOrderTypes |
RMA |
Defines the value for RMA order types. This is a list of code values that represent RMA order type, which affects the attribute mappings. This is a comma-separated (no spaces) list of string values. |
ABCSExtension.PreXformEBMToABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeProcessSOEbizAdapter |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeProcessSOEbizAdapter |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMToEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
OrderSourceReference |
COMMON/SourceSystemIdentifier Default=COMMON |
Property to decide whether OSR should hold the Common ID or Source System Identifier. |
DefaultOrderSourceId |
28 |
Property to supply the ORDER_SOURCE_ID if dvm lookup failure occurs for quotes. |
DefaultQuoteSourceId |
29 |
Property to support the ORDER_SOURCE_ID if dvm lookup failure occurs for quotes. |
Table 15-23 shows settings for the CheckATPSalesOrderSiebelReqABCSImpl service property:
Table 15-23 Settings: CheckATPSalesOrderSiebelReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
SEBL_01 |
Siebel system code (such as SEBL_01, defined in OER) from which requests originate for this process. |
Routing.SalesOrderEBS.ProcessSalesOrderATPCheck.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes to the target service. |
ABCSExtension.PreXformABMtoEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeEBSCheckATPEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeEBSCheckATPEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMtoEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Routing.SalesOrderEBS.ProcessSalesOrderATPCheck.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderEBS.ProcessSalesOrderATPCheck.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Table 15-24 shows settings for the PaymentAuthorizationSalesOrderSiebelReqABCSImpl service property:
Table 15-24 Settings: PaymentAuthorizationSalesOrderSiebelReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
SEBL_01 |
Siebel system code (like SEBL_01, defined in OER) from which requests originate for this process. |
Routing.ReceivedPaymentEBS.ProcessCreditChargeAuthorization.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
ABCSExtension.PreXformABMtoEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeEBSPaymentAuthorizationEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeEBSPaymentAuthorizationEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMtoEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Routing.ReceivedPaymentEBS.ProcessCreditChargeAuthorization.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ReceivedPaymentEBS.ProcessCreditChargeAuthorization.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Table 15-25 shows settings for the CreditCheckSalesOrderSiebelReqABCSImpl service property:
Table 15-25 Settings: CreditCheckSalesOrderSiebelReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
SEBL_01 |
Siebel system code (such as SEBL_01, defined in OER) from which requests originate for this process. |
Routing.CustomerPartyEBSV2.ProcessCreditEligibilityVerification.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.CustomerPartyEBSV2.ProcessCreditEligibilityVerification.RouteToCAVS |
true/false Default = false |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.CustomerPartyEBSV2.ProcessCreditEligibilityVerification.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
ABCSExtension.PreInvokeEBSCreditCheck |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreXformABMtoEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeEBSCreditCheck |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformEBMtoABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-26shows settings for the CalculateShippingChargeSalesOrderSiebelReqABCSImpl service property:
Table 15-26 Settings: CalculateShippingChargeSalesOrderSiebelReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
SEBL_01 |
Siebel system code (such as SEBL_01, defined in OER) from which requests originate for this process. |
Routing.SalesOrderEBSV2.ProcessSalesOrderShippingChargeCalculation.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.SalesOrderEBSV2.ProcessSalesOrderShippingChargeCalculation.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SalesOrderEBSV2.ProcessSalesOrderShippingChargeCalculation.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
ABCSExtension.PreInvokeEBSCalculateShippingCharge |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreXformABMtoEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeEBSCalculateShippingCharge |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformEBMtoABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-27shows settings for the ProcessSalesOrderATPCheckEbizProvABCSImpl service property:
Table 15-27 Settings: ProcessSalesOrderATPCheckEbizProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) from which requests originate for this process. |
Routing.ProcessSalesOrderATPCheckEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/ProcessSalesOrderATPCheckEbizAdapter/ProcessSalesOrderATPCheckEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.ProcessSalesOrderATPCheckEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.ProcessSalesOrderATPCheckEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.FetchATPScheduleSequenceEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/FetchATPScheduleSequenceEbizAdapter/FetchATPScheduleSequenceEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.FetchATPScheduleSequenceEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.FetchATPScheduleSequenceEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
ABCSExtension.PreXformEBMtoABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeCheckATPEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMtoEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeCheckATPEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-28 shows settings for the ProcessCreditChargeAuthorizationEbizProvABCSImpl service property:
Table 15-28 Settings: ProcessCreditChargeAuthorizationEbizProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) from which requests originate for this process. |
Routing.ProcessCreditChargeAuthorizationEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/ProcessCreditChargeAuthorizationEbizAdapter/ProcessCreditChargeAuthorizationEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.ProcessCreditChargeAuthorizationEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.ProcessCreditChargeAuthorizationEbizAdapter.RouteToCAVS |
true/false Default = false |
Govern whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
ABCSExtension.PreXformEBMtoABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokePaymentAuthEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokePaymentAuthEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMtoEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-29 shows settings for the ProcessCreditEligibilityEbizProvABCSImpl service property:
Table 15-29 Settings: ProcessCreditEligibilityEbizProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) from which requests originate for this process. |
Routing.ProcessCreditEligibilityEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/ProcessCreditEligibilityEbizAdapterZ/ProcessCreditEligibilityEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.ProcessCreditEligibilityEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.ProcessCreditEligibilityEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
ABCSExtension.PreXformEBMtoABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeProcessCreditEligibilityEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMtoEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeProcessCreditEligibilityEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-30 shows settings for the ProcessSalesOrderShippingChargeLogisticsProvABCSImpl service property:
Table 15-30 Settings: ProcessSalesOrderShippingChargeLogisticsProvABCSImpl
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
LOGIS_01 |
Logistics system code (such as LOGIS_01, defined in OER) from which requests originate for this process. |
Routing.GLogService.LOGIS_01.EndpointURI |
http://otm-dobson-55-oas.us.oracle.com/ GC3Services/IntXmlService/webservice |
Endpoint URI of the GLOG service. |
Routing.GLogService.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.GLogService.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
ABCSExtension.PreXformEBMtoABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMtoEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeLogisticsABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeLogisticsABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Logistics.CalculateShippingCharge.TransmissionType |
QUERY |
Specifying Logistics web service. It is a query type. (This is a constant for rate enquiry.) |
Logistics.CalculateShippingCharge.RequestType |
LowestCost |
OTM Query type is ordered by lower cost. |
Logistics.CalculateShippingCharge.WeightUOM |
LB |
UOM to be used for weight for OTM. |
Logistics.CalculateShippingCharge.VolumeUOM |
CUFT |
UOM to be used for volume for OTM. |
Table 15-31shows settings for the InterfaceSyncProductStructureEBF service property:
Table 15-31 Settings: InterfaceSyncProductStructureEBF Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Routing.ItemCompositionEBS.SyncItemCompositionList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.ItemCompositionEBS.SyncItemCompositionList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ItemCompositionEBS.SyncItemCompositionList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.ItemCompositionEBS.QueryItemCompositionList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.ItemCompositionEBS.QueryItemCompositionList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ItemCompositionEBS.QueryItemCompositionList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Product.Source.PIP |
O2C/MDM Default = O2C |
Governs whether the product structure must be synced. Default value is O2C, which synchronizes the product structure. |
Table 15-32 shows settings for the RequestProductStructureSiebelReqABCSImpl service property:
Table 15-32 Settings: RequestProductStructureSiebelReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
SEBL_01 |
Siebel system code (such as SEBL_01, defined in OER) from which requests originate for this process. |
ABCSExtension.PreXformABMToEBMABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeProcessItemCompositionEBSEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Routing.ItemCompositionOrchestrationEBS.ProcessItemComposition.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ItemCompositionOrchestrationEBS.ProcessItemComposition.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.ItemCompositionOrchestrationEBS.ProcessItemComposition.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Table 15-33 shows settings for the CreateProductEbizReqABCSImpl service property:
Table 15-33 Settings: CreateProductEbizReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
SourceMileStone |
WF_BPEL_Q |
Governs the name of the queue on which the consumer would be listening (example: WF_BPEL_Q). |
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) to which data is synced. The System code value present in the EBM header of the incoming message takes precedence over this property value. |
Routing.QuerySimpleItemAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QuerySimpleItemAdapter/QuerySimpleItemAdapter_ep |
Endpoint URI of Ebiz adapter. |
Routing.QuerySimpleItemAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ItemEBS.SyncItemList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ItemEBS.SyncItemList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.ItemEBS.SyncItemList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QuerySimpleItemAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
BYPASS_ITEMVALIDATIONORG_FLAG |
Y/N Default value = N |
This property controls whether to bypass the validation of the organization associated with item against OE:Item Validation Org. By default, the organization associated with Item is validated against OE:Item Validation Org. |
ABCSExtension.PreXformABMToEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeItemEBSEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
PUBLISH_ALL_PRODUCT |
Y/N Default = N |
Governs whether to sync both nonorderable and orderable products (when value is Y) or to sync only nonorderable products while performing Item sync (when value is N). |
Table 15-34shows settings for the UpdateProductEbizReqABCSImpl service property:
Table 15-34 Settings: UpdateProductEbizReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
SourceMileStone |
WF_BPEL_Q |
Governs the name of the queue on which the consumer would be listening (example WF_BPEL_Q). |
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) to which data is synced. The system code value present in the EBM header of the incoming message takes precedence over this property value. |
Routing.QuerySimpleItemUpdateAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QuerySimpleItemUpdateAdapter/QuerySimpleItemUpdateAdapter_ep |
Endpoint URI of Ebiz adapter. |
Routing.QuerySimpleItemUpdateAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
BYPASS_ITEMVALIDATIONORG_FLAG |
Y/N Default = N |
This property controls whether to bypass the validation of the organization associated with the item against OE:Item Validation Org. By default, the organization associated with the item is validated against OE:Item Validation Org. |
ABCSExtension.PreXformABMToEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeItemEBSEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Routing.ItemEBS.SyncItemList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ItemEBS.SyncItemList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.ItemEBS.SyncItemList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QuerySimpleItemUpdateAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Table 15-35 shows settings for the BulkLoadProductEbizReqABCSImpl service property:
Table 15-35 Settings: BulkLoadProductEbizReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
SourceMileStone |
WF_BPEL_Q |
Governs the name of the queue on which the consumer would be listening (example: WF BPEL_Q). |
Routing.TransformAppContextEbizService.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI when CAVS is enabled. |
Routing.TransformAppContextEbizService.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) to which data is synced. The System code value present in the EBM header of the incoming message takes precedence over this property value. |
Routing.QuerySimpleItemBulkLoadAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QuerySimpleItemBulkLoadAdapter/QuerySimpleItemBulkLoadAdapter_ep |
Endpoint URI of Ebiz adapter. |
Routing.QuerySimpleItemBulkLoadAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
BYPASS_ITEMVALIDATIONORG_FLAG |
Y/N Default = N |
This property controls whether to bypass the validation of the organization associated with the item against OE:Item Validation Org. By default, the organization associated with the item is validated against OE:Item Validation Org. |
ABCSExtension.PreXformABMToEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeItemEBSEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Routing.ItemEBS.SyncItemList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ItemEBS.SyncItemList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.ItemEBS.SyncItemList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QuerySimpleItemBulkLoadAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Table 15-36shows settings for the SyncProductSiebelProvABCSImpl service property:
Table 15-36 Settings: SyncProductSiebelProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
SEBL_01 |
Siebel system code (such as SEBL_01, defined in OER) from which requests originate for this process. |
SIMPLE_PRODUCT_RELEASE_FLAG |
Y/N Default = Y |
This property controls whether to release Simple Product in Siebel. By default, Simple Product (that is, Bundle product) in Siebel is released. |
COMPLEX_PRODUCT_RELEASE_FLAG |
Y/N Default = N |
This property controls whether to release Complex Product in Siebel. By default, Complex Product (that is, Customizable product) in Siebel is not released. |
Routing.SWIProductIntegrationIORes.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=SecureWebService&SWEExtCmd= Execute&WSSOAP=1 |
Endpoint URI of Siebel service. |
Routing.SWIProductIntegrationIORes.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SWIProductIntegrationIORes.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.ItemEBSV2.SyncItemListResponse.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.ItemResponseEBSV2.SyncItemListResponse.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ItemResponseEBSV2.SyncItemListResponse.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
ABCSExtension.PreXformEBMtoABMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeSWIProductImportUpsertABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeSWIProductImportUpsertABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMtoEBMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Product.Source.PIP |
MDM/O2C Default = O2C |
Governs whether O2C or MDM is the product master. |
Table 15-37 shows settings for the SyncItemCompositionListSiebelProvABCSImpl service property:
Table 15-37 Settings: SyncItemCompositionListSiebelProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
SEBL_01 |
Siebel system code (such as SEBL_01, defined in OER) from which requests originate for this process. |
Routing.SWIProductIntegration.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=SecureWebService&SWEExtCmd= Execute&WSSOAP=1 |
Endpoint URI of Siebel service. |
Routing.SWIProductIntegration.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ItemCompositionEBS.SyncItemCompositionListResponse.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.ItemCompositionResponseEBS.SyncItemCompositionListResponse.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ItemCompositionResponseEBS.SyncItemCompositionListResponse.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>//AIAValidationSystemServlet/asyncrequestrecipient |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.SWIProductIntegrationIORes.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponserecipient |
CAVS Endpoint URI, when CAVS is enabled. |
SIMPLE_PRODUCT_RELEASE_FLAG |
Y/N Default = Y |
This property controls whether to release Simple Product in Siebel. By default, Simple Product (that is, Bundle product) in Siebel is released. |
COMPLEX_PRODUCT_RELEASE_FLAG |
Y/N Default = N |
This property controls whether to release Complex Product in Siebel. By default, Default Complex Product (that is, Customizable product) in Siebel is not released. |
ABCSExtension.PreXformEBMtoABMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeSWIProductImportUpsertABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeSWIProductImportUpsertABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformABMtoEBMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Table 15-38 shows settings for the QueryItemCompositionListEbizProvABCSImpl service property:
Table 15-38 Settings: QueryItemCompositionListEbizProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) to which data is synced. |
PUBLISH_ALL_PRODUCT |
Y/N Default = N |
Governs whether the ABCS process should publish all child components. By default, the process publishes only nonorderable child component product. |
ABCSExtension.PreXformItemEBMtoABMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeExplodeItemCompositionEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeQueryItemCompositionEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformItemABMtoEBMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreXformItemStructureEBMtoABMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreInvokeQueryStructureItemCompositionEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeQueryStructureItemCompositionEbizAdapterABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformItemStructureABMtoEBMEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Routing.ExplodeItemCompositionEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.ExplodeItemCompositionEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/ExplodeItemCompositionEbizAdapter/ExplodeItemCompositionEbizAdapter_ep |
Endpoint URI of Ebiz adapter. |
Routing.ExplodeItemCompositionEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.QueryItemCompositionEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryItemCompositionEbizAdapter/QueryItemCompositionEbizAdapter_ep |
Endpoint URI of Ebiz adapter. |
Routing.QueryItemCompositionEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.QueryItemCompositionEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QueryStructureItemCompositionEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryStructureItemCompositionEbizAdapter/QueryStructureItemCompositionEbizAdapter_ep |
Endpoint URI of Ebiz adapter. |
Routing.QueryStructureItemCompositionEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.QueryStructureItemCompositionEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Table 15-39 shows settings for the CreateAssetSiebelProvABCSImpl service property:
Table 15-39 Settings: CreateAssetSiebelProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Routing.SWIAssetManagementIO.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Default.SystemID |
SEBL_01 |
Siebel system code (such as SEBL_01, defined in OER) from which requests originate for this process. |
ABCSExtension.PreProcessABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreProcessEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Routing.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SWIAssetManagementIO.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SWIAssetManagementIO.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=SecureWebService&SWEExtCmd= Execute&WSSOAP=1 |
Endpoint URI of Siebel Service. |
Table 15-40 shows settings for the UpdateAssetSiebelProvABCSImpl service property:
Table 15-40 Settings: UpdateAssetSiebelProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
SEBL_01 |
Siebel system code (such as SEBL_01, defined in OER) from which requests originate for this process. |
ABCSExtension.PreProcessABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreProcessEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Routing.SWIAssetManagementIO.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SWIAssetManagementIO.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.SWIAssetManagementIO.SEBL_01.EndpointURI |
http://<SIEBEL_HOST>/eai_enu/start.swe?SWEExtSource=SecureWebService&SWEExtCmd= Execute&WSSOAP=1 |
Endpoint URI of Siebel Service. |
Table 15-41 shows settings for the UpdateItemInstanceEbizReqABCSImpl service property:
Table 15-41 Settings: UpdateItemInstanceEbizReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Routing.QueryItemInstanceEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.QueryItemInstanceEbizAdapter.EBIZ_01.EndpointURI |
Ebiz version 11.5.10 EndpointURI should be http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryItemInstanceEbizAdapter/QueryItemInstanceEbizAdapter_ep EBiz version 12.1.x EndpointURI should be http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryItemInstanceEbizR12VersionAdapter/QueryItemInstanceEbizR12VersionAdapter_ep |
Endpoint URI of Ebiz adapter. |
Routing.QueryItemInstanceOrderEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.QueryItemInstanceOrderEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/GetItemValidationOrganizationOUEbizAdapter/GetItemValidationOrganizationOUEbizAdapter_ep |
Endpoint URI of Ebiz adapter. |
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) to which data is synced. |
ABCSExtension.PreProcessABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreProcessEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Routing.QueryItemInstanceOrderEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QueryItemInstanceEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.InstalledProductEBSV2.UpdateInstalledProductList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.InstalledProductEBSV2.UpdateInstalledProductList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.InstalledProductEBSV2.UpdateInstalledProductList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Table 15-42 shows settings for the CreateItemInstanceEbizReqABCSImpl service property:
Table 15-42 Settings: CreateItemInstanceEbizReqABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Routing.QueryItemInstanceEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.QueryItemInstanceEbizAdapter.EBIZ_01.EndpointURI |
Ebiz version 11.5.10 EndpointURI should be http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryItemInstanceEbizAdapter/QueryItemInstanceEbizAdapter_ep EBiz version 12.1.x EndpointURI should be http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/QueryItemInstanceEbizR12VersionAdapter/QueryItemInstanceEbizR12VersionAdapter_ep |
Endpoint URI of Ebiz adapter. |
Routing. GetItemValidationOrganizationOUEbizAdapter.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing. GetItemValidationOrganizationOUEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/GetItemValidationOrganizationOUEbizAdapter/GetItemValidationOrganizationOUEbizAdapter_ep |
Endpoint URI of Ebiz adapter. |
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) to which data is synced. |
ABCSExtension.PreProcessABM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PreProcessEBM |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Routing. GetItemValidationOrganizationOUEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.QueryItemInstanceEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.InstalledProductEBSV2.CreateInstalledProductList.RouteToCAVS |
true/false Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.InstalledProductEBSV2.CreateInstalledProductList.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes the message to the target service. |
Routing.InstalledProductEBSV2.CreateInstalledProductList.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Table 15-43 shows settings for the TransformAppContextEbizService service property:
Table 15-43 Settings: TransformAppContextEbizService Service Property
Property Name | Value/Default Value | Description |
---|---|---|
TransformAppContextEbizService.Soap.EndpointURL |
N/A |
Endpoint URL for the service. |
TransformAppContextEbizService.EBIZ_01.ResponsibilityDVM |
ORACLE_RESPONSIBILITY |
DVM used to look up the responsibility for the User/OU combination for the instance EBIZ_01. |
TransformAppContextEbizService.DefaultUser |
OPERATIONS |
Default user for initializing Oracle EBS service calls. |
TransformAppContextEbizService.DefaultOperatingUnit |
204 |
Default organization for initializing Oracle EBS service calls. |
TransformAppContextEbizService.DefaultResponsibility |
Order Management Super User, Vision Operations (USA) |
Default Oracle EBS responsibility for application context. |
Routing.QueryResponsibilityEbizAdapter.RouteToCAVS |
false/true |
Determines whether the endpoint URL should be routed to either the end application service or CAVS for simulating the service. |
Routing.QueryResponsibilityEbizAdapter.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/asyncresponsesimulator |
This property sets the endpoint URL for the CAVS simulator. |
Default.SystemID |
EBIZ_01 |
The application is responsible for sending the system ID from which the request is being sent. If any requestor application fails to send the system ID, AIA picks the default system ID from this configuration property. |
Routing.QueryResponsibilityEbizAdapter.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/event/AIASystem/Ebiz/ABCS/ QueryResponsibilityEbizAdapter |
Endpoint URI of the Oracle EBS adapter. |
Table 15-44 shows settings for the TransformAppContextSiebelService service property:
Table 15-44 Settings: TransformAppContextSiebelService Service Property
Property Name | Value/Default Value | Description |
---|---|---|
TransformAppContextSiebelService.Soap.EndpointURL |
N/A |
Endpoint URL for the service. |
TransformAppContextSiebelService.DefaultUser |
User1 |
Default Siebel user. |
TransformAppContextSiebelService.DefaultBusinessUnit |
SiebelAdmin |
Default Siebel business unit. |
Table 15-45 shows settings for the SyncSalesOrderEbizProvABCSImpl service property:
Table 15-45 Settings: SyncSalesOrderEbizProvABCSImpl Service Property
Property Name | Value/Default Value | Description |
---|---|---|
Default.SystemID |
EBIZ_01 |
Ebiz system code (such as EBIZ_01, defined in OER) from which requests originate for this process. |
ABCSExtension.PreXformEBMtoABM |
true/false; Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostXformEBMtoABM |
true/false; Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
Routing.ProcessSalesOrderEbizAdapter_pttV1.RouteToCAVS |
true/false; Default = false |
Governs whether the service should route the message to the CAVS endpoint. Default value is false, which does not route the message to CAVS. If set to true, it routes the message to CAVS using the endpoint specified in the CAVS.EndpointURI property. |
Routing.ProcessSalesOrderEbizAdapter_pttV1.CAVS.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/AIAValidationSystemServlet/syncresponsesimulator |
CAVS Endpoint URI, when CAVS is enabled. |
Routing.ProcessSalesOrderEbizAdapter_pttV1.EBIZ_01.EndpointURI |
http://<SOA_HOST>:<SOA_PORT>/ soa-infra/services/default/ProcessSalesOrderEbizAdapter/ProcessSalesOrderEbizAdapter_ep |
Endpoint URI of the Ebiz adapter. |
Routing.ProcessSalesOrderEbizAdapter_pttV1.MessageProcessingInstruction.EnvironmentCode |
Default value = PRODUCTION |
Governs whether the message is routed to CAVS or to the specified target service. Default value is PRODUCTION, which routes to the target service. |
ABCSExtension.PreInvokeABS |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
ABCSExtension.PostInvokeABS |
true/false Default = false |
Governs whether ABCS Extension is enabled at the predefined plug-into point. If set to true, then the Extension process (defined along AIA ABCS Extension guidelines) is invoked. |
RMAOrderTypes |
RMA |
This property defines the value for RMA order types. This is a list of code values that represent RMA order type. Affects the attribute mappings. This is a comma-separated (no spaces) list of string values. |
OrderSourceReference |
COMMON/SourceSystemIdentifier; Default = COMMON |
Property to decide Order Source Reference should hold the Common ID or Source System Identifier. |
DefaultOrderSourceId |
Default value = 28 |
Property to supply the default ORDER_SOURCE_ID if dvm lookup fails for quotes. |
DefaultQuoteSourceId |
Default value = 29 |
Property to supply the default ORDER_SOURCE_ID if dvm lookup fails for quotes. |
OM.CALCULATE_PRICE_FLAG |
Default value = P |
The CALCULATE_PRICE_FLAG on the order line entity controls whether a pricing or charge calculation should be done on the line. Default is P, which specifies that only the freight charge calculation is done. |
HONOR_ORDER_NUMBER |
Y/N; Default = N |
Governs whether ORDER_NUMBER should be passed as part of inbound ABM. Default value is N which does not pass ORDER_NUMBER. |
CreditCardAuthorized |
Y/N; Default = Y |
Property governing whether to pass credit card details, even when authorization details are missing. Default value is Y, which assumes that authorization details are present. |
This section includes these post installation configurations for the Order to Cash integration:
Configuring the Oracle Product Master Data Management pre-built integration with the Order to Cash: Siebel CRM - EBS pre-built integration to enable interoperability
Deploying services and creating grants to methods
Subscribe to business events
To enable interoperability between the Product MDM integration and the Order to Cash integration, see the Functional Interoperability Configuration Guide.
To deploy services and create grants to methods:
Add the responsibility for the user (SYSADMIN).
Navigate to System Administrator, Security: User, Define.
Query for User (SYSADMIN).
Add responsibility Integrated SOA Gateway.
Add the role Irep Administrator for the user.
Navigate to User Management, User, Search for user, Update, Assign Role.
Search for role Irep Administrator and assign.
Deploy service and create grants.
Navigate to Integrated SOA Gateway, Integration Repository, Select View By as Interface Type, Product Life Cycle Management, and Advanced Product Catalog.
Click Item Service.
Select the methods and user (who is invoking the service).
Create grant.
Select the methods and click Create Grant.
Select the user who invokes the service and click Deploy Service.
To subscribe to business events:
Log in as SYSADMIN/SYSADMIN.
Navigate to Workflow Administrator, Web Applications Responsibility, Business Events.
Query for business event oracle.apps.ego.item.publishItem, or oracle.apps.bom.structure.publishStructure.
Click the Subscription button.
Enter the details shown in Example 15-2 in the Subscription page:
Click Apply.
Note:
Users can publish only those items on which they have Publish Privilege. By default, this privilege is available with Item Author Role. This privilege can be added to any of the roles. Before publishing, users have to check if they have privilege to publish items/structures.
For more information about installation and related activities, download the latest version of the Oracle Application Integration Architecture Installation and Upgrade Guide for Pre-Built Integrations available on Oracle Technology Network. This guide is continually updated.