Skip Headers
Oracle® Big Data Appliance Owner's Guide
Release 2 (2.0.1)

Part Number E36962-03
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Feedback page
Contact Us

Go to previous page
Previous
PDF · Mobi · ePub

Index

A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W 

A

AC breaker panels, 2.4.2
AC power, location, 2.4.2
access requirements, 2.2.2
access route requirements, 2.2.1, 2.2.1
accessing servers from KVM, 7.1.5
acoustic levels, 2.1
add subcommand, 9.7
adding racks, 9.1.2
administrative network, 3.1.2
cabling requirements, 2.7
configuration, 7.6
connections, 2.7
ports, 3.1
administrative network diagram, 13.2
administrative utilities, 1.5
Africa
PDU specifications, 2.4.1.3, 2.4.1.4
air conditioning, 2.5, 2.8, 6.1
airflow, 2.1, 2.5
airflow requirements, 2.6
alerts, A.1
generating, 13.1
sent by Cloudera Manager, 4.4
Allen wrench keys, 6.3.2.2
altitude requirements, 2.5
ambient relative humidity range, 2.5
ambient temperature range, 2.5, 10.1
Americas
PDU specifications, 2.4.1.1, 2.4.1.2
Apache OpenOffice Spreadsheet, 4.2.1
Asia Pacific
PDU specifications, 2.4.1.3, 2.4.1.4
ASR
about, 5.1
activating assets, 5.6
configuration, 5.2
troubleshooting, 5.8
See also Auto Service Request
ASR Manager
port number, 4.4
ASR validation
generating test events, 5.7
Auto Service Request
alerts, A.1
installation on Oracle Big Data Appliance, 9.4
installing, 4.4, 9.6.2
See also ASR
Auto Service Request ports, 3.4

B

base image reinstallation, 9.5
batteries
life expectancy, B.2
replacement policy, B.2
BDA server offline repair category, B.1
bda_imaging_status file, 7.6.1
BDA_REBOOT files, 6.4.3
bdacheckcluster utility, 11
bdacheckhw command, 7.5, 10.7.3
bdacheckhw utility, 11
bdacheckib utility, 11
bda-checkip.out file, 3.5
bdachecknet command, 11
bdachecksw command, 7.5, 10.7.3
bdachecksw utility, 11
BdaDeploy.json file, 4.2.3, 7.6
bdadiag utility, 11
bdaid utility, 11
bdaimagevalidate utility, 11
bda-install-template.pdf file, 4.2.3
BDAMammoth directory, 9.6, 9.7
BDA-O repair category, B.1
bdaredoclientnet utility, 11
bdaserials utility, 11
bdaupdatefw utility, 11
Big Data Appliance
See Oracle Big Data Appliance
Big Data Connectors
See Oracle Big Data Connectors
biosconfig command, 7.5
black cables, C.1, D.1
blue cables, C.1, D.1
bolts, 6.3.2.2
bondeth0 interface
host names, 4.3
network connections, 3.1.1
bondib0 interface
description, 3.1.2
host names, 4.3
maintenance, 10.7
bondib0 network
verifying operations, 10.7.3
boot order check, 7.5
breaker panels, 2.4.3

C

cable tie,
removing, 6.4.2
cable-routing floor cutout, 6.3.2.2
cables
color coding, C.1, D.1
spares, 1.4
splitter, 3.2.2
cabling
client network, 3.2
eight racks, E.9
existing network requirements, 2.7
five racks, E.6
four racks, E.5
multirack, 8.2, E.1
seven racks, E.8
six racks, E.7
spare parts, B.9
three racks, E.4
two racks, E.3
cage nuts, 6.2.1
casters, 6.3.1
cautions, 10.2.3
CDH
cluster configuration, 1.6, 9.1.2
health checks, 11
installing, 9.6.2
CDH cluster logs, 11
CDH ports, 3.4
CDH services, starting, 9.6.2
ceiling height requirements, 2.2
checking firmware, 7.5, 7.5
checking network configuration, 11
checking the server software, 11
circuit breakers, 2.4.3
general requirements, 2.4.3
circuit breakers for PDUs, 6.4.3
Cisco switch
replacement parts, B.7
See Ethernet switch
CleanupInstall step, 9.6.2
CleanupSSHroot step, 9.6.2
CLI, Oracle ILOM, 13.1.1
client access network
cabling requirements, 2.7
description, 3.1.2
requirements, 2.7
client network
bandwidth, 3.2.1
cabling, 3.2
clock
configuring Ethernet switch, 7.2.7
configuring InfiniBand switches, 7.3.2
Cloudera Manager, 4.4, 4.4
Cloudera's Distribution including Apache Hadoop
See CDH
cluster configurations, 1.6
cluster names, 4.3
collecting diagnostics, 11
color coding, cables, C.1, D.1
commands
remote execution across servers, 1.5, 12
component failure
environmental causes, 2.5
components, location in the rack, C.2, D.2
configuration
disk controller, 10.4.1.1
physical drives, 10.4.1.3
virtual drive, 10.4.1.2
configuration files, 7.6.1
generating, 4.2.2
location, 4.2.2
ntp.conf file, 10.9
configuration utility, 4
configuration worksheets, 2.8, 4.2.2
configure terminal command, 7.2.3
configuring a new disk, 10.5.5
configuring ASR, 5.2
configuring Ethernet switch, 7.2, 7.2.3
configuring KVM, 7.1, 7.1.4
configuring servers, 7.5
connecting KVM to the network, 7.1.2
connectors
See Oracle Big Data Connectors
cooling requirements, 2.1
copying files, 12.1.1
CopyLicenseFiles step, 9.6.2
CopySoftwareSource step, 9.6.2
corrosion problems, 2.5
CreateLogicalVolumes step, 9.6.2
CreateUsers step, 9.6.2

D

data center switch configuration, 2.8
dba group, 4.4, 9.6.2
dcli utility
description, 1.5
examples, 12.4
option descriptions, 12.2
return values, 12.3
syntax, 12.2
target servers, 7.5, 12.1.2.2
using, 12
device mappings
restoring original, 10.5.5
diagnostics collection, 11
dimensions
rack, 2.2
shipping, 2.2.1
disablesm command, 7.3.3, 8.2, 8.3, 8.3, 10.7.2
disabling spanning tree, 7.2.9
disk controller configuration, 10.4.1.1
disk controllers, 10.4.1
disk drives
spares, 1.4, B.4
disks
repairing, 10.4
replacing, 10.5
software configuration, 10.5.5
DNS network registration, 2.8
DNS server configuration, 7.2.6
DNS server requirement, 3.1.2, 3.1.2, 4.3
door dimensions, 2.2.1
downgrading the factory image, 9.1.2

E

earth ground cable, 6.3.3
electric receptacles, 2.4.1
electrical access, 2.2.2
electrical requirements, 2.4, 6.1, 6.4.3
electrical storms, 2.4
electronic noise, 6.1
electrostatic discharge, 2.5
elevator requirements, 2.2.1
email accounts
My Oracle Support, 5.1
email configuration, 4.4
emergency shutdown, 10.2.2
enablesm command, 7.3.3, 8.2, 8.3, 8.3
env_test command, 7.3.3
environmental specifications, 2.1
error messages, A.1
eth0 interface, 3.1.2
Ethernet bridge ports, 11
Ethernet cabling, 2.7, 3.2.1
Ethernet interface, 3.1.2
Ethernet over InfiniBand protocol., 3.2.1
Ethernet ports, 2.1, 3.1
Ethernet switch
configuration, 7.2, 7.2.2
configuring host name, 7.2.3
IP routing, 7.2.3
port speed, 7.2.3
replacement parts, B.7
replacement switch, 1.6
setting IP address, 4.3
setting remote password, 7.2.4
spare parts, 1.4
time settings, 7.2.7
validating and saving configuration, 7.2.10
Europe
PDU specifications, 2.4.1.3, 2.4.1.4
Exadata Database Machine
See Oracle Exadata Database Machine
ext4 file system, 10.5.7.3
external filer configuration, 9.6.2

F

Fabric Management, 7.3.3
factory image reinstallation, 9.5
factory patches
installing, 9.6.2
factory software image, 7.6.1
failover connections, 3.1.1, 3.2.1
failover switch connections, 3.1.1, 3.1.2
Fibre Channel over Ethernet, 1.6
filler panels, 2.6
firewall configuration, 2.8
firmware updates, 11
firmware upgrades
KVM switch, 7.1.3
PDUs, 7.4.2
restrictions, 1.6
first server location, 7.6.2
floor cut dimensions, 6.3.2.2
floor load, 2.2.1, 2.3, 2.3
floor tiles, 2.6
flooring
raised, 2.3
raised pattern, 2.2.1
forklift, 2.2.1
FRUs, B

G

gateway addresses
factory settings, 3.3
gateway configuration
Ethernet switch, 7.2.3
gateway switches
assigning to VNICs, 3.2.1
cabling, 3.2
configuring, 7.3
connecting to Oracle ILOM, 13.5.2
replacing, 10.7.2
using splitter cables, 3.2.2
See also InfiniBand switches
getmaster command, 8.3, 8.3
getting help, 11
ground cable, 6.3.3, 6.3.3
grounding resistance, 6.1
grounding to earth, 2.4.3
groups, 9.6.2
GRUB master boot records, 10.5.7.5

H

Hadoop
cluster configuration, 1.6, 9.1.2
installing, 9.6.2
See also CDH
hadoop group, 9.6.2
Hadoop ports, 3.4
Hadoop services, starting, 9.6.2
hardware diagnostics, 13
hardware failures
automatic reporting, 5.1
hardware profiles
acquiring from servers, 7.5
hardware validation, 11, 11, 11
HDFS diagnostics, 11
HDFS disks
formatting, 10.5.9.1
HDFS partition, 10.5.7.3
hdfs user, 9.6.2
health checks
InfiniBand switches, 7.3.3
high-voltage PDUs, 2.4.1.3, 2.4.1.4, 7.4.3, 7.4.3
Hive service, starting, 9.6.2
hosts
factory IP addresses, 3.3
hot swap repair category, B.1
HS repair category, B.1
humidity range, 2.5, 2.5

I

ibdiagnet command, 10.7.3
iblinkinfo command, 11
ibqueryerrors command, 10.7.3
ibstatus command, 7.5
ifcfg-bondib0 file, 10.6
ILOM
See Oracle ILOM
ILOM host names, 4.3
ilom-admin
default password, 7.3.1
ilom-admin user, 13.1.2
ilom-operator user, 13.1.2
image validation, 11
image version
downgrading, 9.1.2
upgrading, 9.1.2
imagehistory utility, 11
imageinfo utility, 7.6.1, 9.1.2, 11
incline, maximum, 2.2.1
InfiniBand configuration, 7.3
InfiniBand network
cabling checks, 11
factory IP addresses, 3.3
host names, 4.3
verifying operations, 10.7.3
InfiniBand network configuration, 7.6
InfiniBand network interface card, 3.1
InfiniBand private network, 3.1.2
InfiniBand Subnet Managers, 10.7.4
InfiniBand switches
changing IP addresses, 10.6
checking status, 7.5
configuring, 7.3
health checks, 7.3.3
on Oracle Exadata Database Machine, 7.3.3
on Oracle Exalogic, 7.3.3
priority settings, 7.3.3
replacing, 10.7.2
setting IP addresses, 4.3
setting time zone, 7.3.2
spare parts, B.5, B.6
infrastructure repair category, B.1
installation errors, 9.2
Installation Template, 4.2.3
InstallBDASoftware step, 9.6.2
InstallHadoop step, 9.6.2
installing
base image, 9.5
third-party software, 1.6
installing patches, 9.6.2
installing the software
See also Mammoth Utility, 9.1.1
International Electrotechnical Commission (IEC), 2.4.4
IP address requirements, 2.1
IP addresses
changing for InfiniBand switches, 10.6
custom settings, 4.3
factory settings, 3.3
IP routing, 7.2.3
ipmitool command, 7.5
IR repair category, B.1

J

Japan
PDU specifications, 2.4.1.1, 2.4.1.2
jumper brackets, 6.2.1

K

KVM switch
accessing servers, 7.1.4
cabling, D.3
configuration procedures, 7.1
connecting to the network, 7.1.2
firmware upgrades, 7.1.3
naming, 7.1.2
setting IP address, 4.3
starting, 7.1.1
KVM switch, MAC address, 7.1.2

L

leaf switches
configuring, 7.3
See also InfiniBand switches
LED color codes, B.3.1, B.3.2
leveling bolts, 6.2.2
leveling feet, 6.3.1, 6.3.2.1
licenses, location, 9.6.2
licensing restrictions, 1.6
lift gate, 2.2.1
lightning arresters, 2.4
lights-out management, 13
listlinkup command, 11
loading dock, 2.2.1
locating
first server, 7.6.2
location in the rack, C.2, D.2
locks, panel, 6.2.1
log files
Mammoth Utility, 9.2
logical volume for Oracle NoSQL Database, 9.6.2
low-voltage PDUs, 2.4.1.1, 2.4.1.2, 7.4.3, 7.4.3

M

MAC address of KVM switch, 7.1.2
MAC addresses, 11
maintenance access requirements, 2.2.2, 2.2.2
Mammoth Reconfiguration Utility
syntax, 9.7
Mammoth Utility
description, 9.1
execution steps, 9.6.2
location, 9.6
log files, 9.2
reasons for failure, 9.1.2
running, 9.1.1
synchronizing clocks, 7.3.2
syntax, 9.6
mammoth-rack_name.params file, 4.2.3
management network
cabling requirements, 2.7
configuration, 7.6
connecting the KVM, 7.1.2
connections, 2.7
factory IP addresses, 3.3
host names, 4.3
ports, 3.1
management tools
Oracle ILOM, 13.1.1
management utilities, 1.5
mapred user, 9.6.2
MegaCli64 command, 7.5, 10.4.1.1
Microsoft Office Excel, 4.2.1
Middle East
PDU specifications, 2.4.1.3, 2.4.1.4
minimum ceiling height, 2.2
monitoring PDUs, 7.4.3
mount point
logical volume for Oracle NoSQL Database, 9.6.2
mounting a device, 7.6.2
mounting brackets, 6.2.2, 6.3.2.2
installation instructions, 6.3.2.2
mounting tool, 6.2.1
multiple-rack clusters
client network connections, 3.2.4
multirack cabling
procedures, 8.1
three to eight, 8.3
two racks, 8.2
multirack software configuration, 9.1.2
My Oracle Support, 4.2.1
email account, 5.1
MySQL Database installation, 9.6.2

N

naming conventions, 4.3
NET0, 3.1.2
network
connecting the KVM, 7.1.2
network configuration, 7.6
network configuration worksheet, 4.3
network connections, 2.7, 7.6.4
reconfiguring 10GbE, 11
network diagram, 3.1.3, 13.2
network errors
checking for, 3.5
network interfaces
InfiniBand card, 3.1
network operations
verifying InfiniBand, 10.7.3
network registration, 2.8
network requirements, 2.1
Network Time Protocol, 10.9
network topology, 10.7.4
network validation, 11, 11
networks
administrative, 3.1.2
client access, 2.7, 3.1.2
descriptions, 3.1.2
factory IP addresses, 3.3
InfiniBand, 3.1.2
networksetup scripts, 7.6.3, 7.6.5
nodes
location in the rack, C.2, D.2
noise, electronic, 6.1
North America
PDU specifications, 2.4.1.1, 2.4.1.2
NoSQL database
See Oracle NoSQL Database
NTP server requirement, 3.1.2, 3.1.2, 4.3
NTP servers, 10.9
configuring, 7.2.8
setting on InfiniBand switches, 7.3.2
ntp.conf file, 10.9
nuts, 6.2.1

O

ODI
See Oracle Data Integrator
oinstall group, 4.4, 9.6.2
operating cautions and warnings, 10.2.3
operating system
configuring a new disk, 10.5.7
operating system disks, 10.5.7
operating system history, 11
operating system image, 11
Oracle Big Data Appliance
general description, 1.1
rack components, 1.2
server components, 1.3
Oracle Big Data Appliance Configuration Worksheets, 2.8
Oracle Big Data Connectors
installation, 9.1.2, 9.6.2
installing server components, 4.4
software installation, 9.1.2
Oracle Data Integrator, 4.4
installing the agent, 4.4
Oracle Enterprise Manager Cloud Control
installing support on Oracle Big Data Appliance, 9.4
Oracle Exadata Database Machine, 4.4
InfiniBand firmware version, 7.3.3
network identifiers, 4.4
Oracle Exalogic
InfiniBand firmware version, 7.3.3
Oracle ILOM, 13
backing up configuration, 10.7.1.1
connecting to CLI, 13.4.1
connecting to web interface, 13.4.2
description, 13.1
Ethernet connections, 13.4
factory IP addresses, 3.3
opening serial connections, 13.5
restoring configuration, 10.7.1.2
user interfaces, 13.1.1
Oracle ILOM port, 3.1
Oracle Inventory Group, 4.4
Oracle Linux, 1.1
Oracle NoSQL Database, 9.6.2
creating logical volumes, 9.6.2
disk configuration, 10.5.8
installation, 4.4, 9.6.2
logical volume, 9.6.2
Oracle NoSQL Database disks, 10.5.8
Oracle Open Office Calc, 4.2.1
Oracle Support, 11
oracle user name, 4.4
orange cables, C.1, D.1
OS Watcher logs, 11

P

pallet jack, 2.2.1
panel locks, 6.2.1
parallel execution of commands, 12
partitioning a new disk, 10.5.7.1
passwordless SSH, 11, 11, 12.1.1
passwords (default)
Ethernet switch, 7.2.3
ilom-admin, 7.3.1
PDU metering unit, 7.4.1
servers, 7.5
patches
installing, 9.6.2
PatchFactoryImage step, 9.6.2
path to data center, 2.2.1
PDAs, location in the rack, C.2, D.2
PDU configuration, 7.4.1
PDU metering unit
default password, 7.4.1
PDU requirements, 2.4.1
PDU specifications
Americas, Japan, Taiwan, 2.4.1.1, 2.4.1.2
Europe, Middle East, Africa, Asia Pacific, 2.4.1.3, 2.4.1.4
PDU thresholds, 7.4.3
PDUs
circuit breakers, 6.4.3
firmware upgrade, 7.4.2
network connections, 7.4.1
powering on, 6.4.3
replacement parts, B.8
setting IP addresses, 4.3
single-phase, 6.1, 6.4.3
perforated tiles, 2.6
photocopiers, 6.1
physical drive configuration, 10.4.1.3
port assignments, 3.4
port speed
Ethernet switch, 7.2.3
ports
ASR Manager, 4.4
connecting to 40 GbE, 3.2.3
power connectors, 2.4.1
power cord length requirements, 2.4.2
power cords, 2.4.3, 2.4.4
connecting to rack, 6.4.2
removing cable ties, 6.4.2
routing, 6.4.2
power LEDs
locations, 6.4.3
power off switch, 10.2.2.1
power outlet grounding, 2.4.4
power receptacle location, 2.4.2
power requirements, 2.1, 2.4
power supplies, uninterruptable, 2.4.3
powering off
emergency, 10.2.2.1
sequence, 10.2.1.3
powering on, 6.4.3, 10.2.1.1
preinstallation tasks, 2.8
preinstall-checkip script
description, 4.2.3
running, 3.5
PreInstallChecks step, 9.6.2
private network
verifying operations, 10.7.3
problem reporting, 5.1
Puppet utility, 9.6.2, 9.6.2

Q

QSFP ports, splitting, 3.2.2

R

rack components, 1.2
rack configuration file, 9.1.2
rack dimensions, 2.2
rack layout illustration, C.2, D.2
rack names, 4.3
rack weight, 2.1
rack-hosts-infiniband file, 7.5
racks
adding another, 8.1
connecting power cords, 6.4.2
inspecting, 6.4.1
installing
Oracle Big Data Appliance software, 9.1
moving instructions, 6.3.1
reinstalling base image, 9.5
RAID arrays
repairing logical, 10.5.7.2
RAID configuration, 7.5
red cables, C.1, D.1
reimaging the servers, 9.5
reinstalling the software, 9.1.1
relative humidity, 2.5, 2.6
remove subcommand, 9.7
remove-root-ssh command, 11
remove-root-ssh script, 12.1.1
repair categories, B.1
replacement parts, B
replacing spine switch, 10.7.2
restart validation, 6.4.3
restrictions on use, 1.6
root user
passwordless SSH, 12.1.1
route requirements, 2.2.1
running-config output, 7.2.10

S

safety guidelines
installation, 6.1
scp file copy utility, 12.1.1
screwdrivers, 6.2.1
screws, 6.2.1
sensor monitoring, 13.1
serial numbers, 11
server components, 1.3
server configuration, 7.5
server diagnostics, 11
server disks
replacing, 10.5
software configuration, 10.5.5
server software validation, 11
servers
boot order, 7.5
connecting to Oracle ILOM, 13.5.1
default passwords, 7.5
factory IP addresses, 3.3
LED color codes, B.3.1, B.3.2
location in the rack, C.2, D.2
monitoring, 13
setting IP addresses, 4.3
spare parts, B.4
upgrading base image, 9.5
service locations, restrictions on moving, 1.6
services, starting, 9.6.2
setsmpriority command, 7.3.3, 8.2, 8.3, 8.3
SetupASR step, 9.6.2
SetupInstall step, 9.6.2
SetupMountPoints step, 9.6.2
SetupMySQL step, 9.6.2
SetupPuppet step, 9.6.2
setup-root-ssh command, 11
setup-root-ssh script, 10.8, 12.1.1
shipping crate dimensions, 6.2
shipping dimensions, 2.2.1
shipping kit, 6.2.1
shipping weight, 2.2.1
show command, 7.2.10
showunhealthy command, 7.3.3
showusb command, 7.6.2
showvlan command, 11
showvnics command, 11
shutdown command, 10.2.1.3.1
single-phase PDUs, 2.4.1.1, 2.4.1.3, 6.1, 6.4.3, 7.4.3, 7.4.3
site readiness tasks, 2.8
SMTP alerts, 5.1
SMTP configuration, 4.4
SNMP alerts, 5.1
software configuration worksheet, 4.4
software image
downgrading, 9.1.2
upgrading, 9.1.2
verifying, 7.6.1
software installation
multiple racks, 9.1.2
upgrading, 9.3
using Mammoth, 9.1
software installation errors, 9.2
software installation,
third-party, 1.6
software port assignments, 3.4
software profiles
acquiring from servers, 7.5
software source code, third party, 9.6.2
software validation, 11, 11
sound levels, 2.1
South America
PDU specifications, 2.4.1.1, 2.4.1.2
spanning tree
disabling uplink port, 7.2.9
spare parts, 6.2.2
spares kit, 1.4
spine switch
configuring, 7.3
spine switches
cabling, E.1.2
replacing, 10.7.2, 10.7.2
splitter cables, 3.2.2
spreadsheet
configuration utility, 4.1
spreadsheet programs, 4.2.1
spring nuts, 6.2.1
SSH keys
checking rack distribution, 7.5
SSH, removing passwordless, 11
SSH, setting up passwordless, 11
stabilizing feet, 6.3.1
stabilizing the rack, 6.3.2.1, 6.3.2.2
StartHadoopServices step, 9.6.2
StartHiveService step, 9.6.2
starting KVM, 7.1.1
startup order check, 7.5
state file, 9.1.2
static discharges, 2.5
static electricity, 6.1
Subnet Manager Master, 8.3
Subnet Managers, 10.7.4, 10.7.4
subnet mask requirements, 10.6
subnet masks
factory settings, 3.3
subnet requirements, 10.6
Sun Network 10 GbE Switch 72p, 1.6, 3.2.3
Sun Network QDR InfiniBand Gateway Switch, 10.8, 11, 11
support accounts, 5.2
support services, 11
swap partition
restoring, 10.5.7.4
swapping, 10.5.3
switches, C.2, D.2
monitoring, 13
naming conventions, 4.3
replacement parts, B.7
replacing, 10.7.2
setting host names, 7.3.1
setting IP addresses, 4.3
spare parts, B.5, B.6
third-party, 1.6

T

Taiwan
PDU specifications, 2.4.1.1, 2.4.1.2
telnet access
configuring Ethernet switch, 7.2.4
temperature
acceptable range, 2.5
operating range, 2.5
third-party licenses, location, 9.6.2
third-party software, 1.6
third-party software source code, 9.6.2
third-party switches
restrictions on use, 1.6
three-phase PDUs, 2.4.1.2, 2.4.1.4, 7.4.3, 7.4.3
thresholds for PDUs, 7.4.3
time zone
configuring Ethernet switch, 7.2.7
configuring InfiniBand switches, 7.3.2
setting summer time, 7.2.7
top clearance (rack), 2.2

U

unpacking instructions, 6.2.2
upgrade history, 11
upgrading base image, 9.5
upgrading the factory image, 9.1.2
upgrading the software, 9.3
UPS, 2.4.3
USB devices
restrictions on use, 1.6
USB flash drive, 7.6.2
users, 9.6.2

V

validating a cluster, 11
validating hardware and software, 11
validating network configuration, 11
validating the server software, 11
validation checks after reboot, 6.4.3
ventilation requirements, 2.6, 2.6
verifying
database server configuration, 10.4.1
version command, 7.3.3
virtual drive configuration, 10.4.1.2
VLAN configuration, 11
VLANs
configuration example, 7.2.3
default configuration, 3.1.1
VNIC configuration, 11
VNICs
assigning to gateway switches, 3.2.1
default configuration, 3.1.1
re-creating, 11

W

warnings, 10.2.3
warranty restrictions, 1.6
washers, 6.3.2.2
weight
rack, 2.1
shipping, 2.2.1
wrenches, 6.2.1, 6.3.2.2
wrist strap, 6.2.1