Oracle® Application Integration Architecture Agile Product Lifecycle Management Integration Pack for Oracle E-Business Suite: Design to Release Implementation Guide Release 11.2 Part Number E36185-05 |
|
|
PDF · Mobi · ePub |
This appendix discusses the security policies available for Agile Product Lifecycle Management Integration Pack for Oracle E-Business Suite Design to Release.Table D-1 describes the composites delivered with this integration and their default Service Policies (entry point) and Client Policies (invocation point). It describes the reason why the policy is either globally or locally attached.
To validate the attached policies:
Login to Oracle Enterprise Manager Fusion Middleware Control.
Navigate to SOA, default.
Select the composite to verify
On the Dashboard tab, navigate to the Services and References section.
Select the text in the Name column (service or reference/client).
A new page will open.
Select the Policies tab.
View the directly or globally attached policies.
Note:
The information listed in Table D-1 assumes the latest rollup patch (RUP) for the Design to Release: Agile - EBS / PIM PIP is applied. The latest patch number at the time of the 11.1 release is 12543953, but it is recommended to download the latest RUP from My Oracle Support (MOS).
Composite | Service | Reference | Security Policy | csf-key | Attached Directly or Globally | Comments |
---|---|---|---|---|---|---|
ACSAXMLJMSConsumer |
AIASystem.Agile.ECOQueue.ACSJMSConsumer_RS_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows JMSConsumer naming standards, so it gets this global policy automatically attached. |
ACSAXMLJMSConsumer |
ACSJMSWeblogicConsumer |
N/A |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
ACSAXMLJMSConsumer |
N/A |
BPELSystem.default.CreateQueueService.CreateQueueService_1_0 |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows JMSConsumer naming standards, so all references get this global policy automatically attached. |
BillOfMaterialsConfigurationEBS |
BillOfMaterialsConfigurationEBS_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so it gets this global policy automatically attached. |
BillOfMaterialsConfigurationEBS |
N/A |
GetConfigurationURLAgileReqABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
BillOfMaterialsConfigurationEBS |
N/A |
SyncBillOfMaterialsConfigurationListAgileProvABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
BillOfMaterialsConfigurationEBS |
N/A |
AsyncResponseSimulator |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
ChangeStatusDBAdpater |
AIASystem.Agile.ABCSImpl.ChangeStatusDBAdapter_RS_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows Adapter naming standards, so it gets this global policy automatically attached. |
ChangeStatusDBAdpater |
N/A |
AIASystem.Agile.ABCSImpl.ChangeStatusDBAdapter |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
CreateEngineeringChangeOrderListEbizAdapter |
CreateEngineeringChangeOrderListEbizAdapter_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows Adapter naming standards, so it gets this global policy automatically attached. |
CreateEngineeringChangeOrderListEbizAdapter |
N/A |
CreateEngineeringChangeOrderListEbizAdapter |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
CreateEngineeringChangeOrderListEbizProvABCSImpl |
CreateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
CreateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
ECOService |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
CreateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
CreateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
EngineeringChangeOrderErrorResponseEBS |
oracle/wss_username_token_client_policy |
AIABasicCredentials |
Directly |
We attach a local policy in this case to break the transaction. The global transaction will have optimization on, which forces all SOAP calls to be local, so everything would be in the same transaction. We attach a local policy in this case so that we are NOT using a policy with optimize calls turned on so that we break the transaction. This is needed for Async-Delayed Response calls to work properly in an error scenario so the error gets returned to the Requester instead of just rolling back the entire transaction. |
CreateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
UserExt |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
CreateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
EngineeringChangeOrderResponseEBS |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
CreateQueueControlService |
PollQueueControl_RS_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that other ABCS are using. Since this composite does not following naming standards we must attach this as a local policy. |
CreateQueueControlService |
PollQueueControl |
N/A |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
CreateQueueControlService |
N/A |
InsertIntoQueueControl |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
CreateQueueService |
ACS |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that other ABCS are using. Since this composite does not following naming standards we must attach this as a local policy. |
CreateQueueService |
N/A |
InsertIntoQueue |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
EngineeringChangeOrderEBS |
EngineeringChangeOrderEBS_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so it gets this global policy automatically attached. |
EngineeringChangeOrderEBS |
N/A |
UpdateEngineeringChangeOrderListAgileProvABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
EngineeringChangeOrderEBS |
N/A |
ValidateEngineeringChangeOrderListEbizProvABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
EngineeringChangeOrderEBS |
N/A |
CreateEngineeringChangeOrderListEbizProvABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
EngineeringChangeOrderEBS |
N/A |
AsyncResponseSimulator |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
EngineeringChangeOrderResponseEBS |
EngineeringChangeOrderResponseEBS_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so it gets this global policy automatically attached. |
EngineeringChangeOrderResponseEBS |
N/A |
AsyncResponseSimulator |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
EngineeringChangeOrderResponseEBS |
N/A |
ProcessEngineeringChangeOrderAgileReqABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
EngineeringChangeOrderResponseEBS |
N/A |
ValidateEngineeringChangeOrderListAgileReqABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
EngineeringChangeOrderResponseEBS |
N/A |
UpdateEngineeringChangeOrderListEbizReqABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
GenerateItemNumberService |
client |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that other ABCS are using. Since this composite does not following naming standards we must attach this as a local policy. |
GenerateItemNumberService |
N/A |
GenerateItemNumberService |
oracle/wss_username_token_client_policy |
GINServiceKey |
Directly |
The Ebiz web service needs the wss_http_token_client_policy policy attached using the GINServiceKey when their service is called. This passes the Ebiz credentials to their web services. Without this directly attached policy, the global policy would be used and it would try to pass the AIA FMW credentials, which are not correct to get a user into Ebiz. |
GetConfiguratorURLAgileReqABCSImpl |
client |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
GetConfiguratorURLAgileReqABCSImpl |
N/A |
BillOfMaterialsConfigurationEBSV1 |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
GetConfiguratorURLAgileReqABCSImpl |
N/A |
ExtensionServices |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
GetConfiguratorURLAgileReqABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
GetConfiguratorURLEbizAdapter |
GetConfiguratorURLEbizAdapter_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows Adapter naming standards, so it gets this global policy automatically attached. |
GetConfiguratorURLEbizAdapter |
N/A |
GetConfiguratorURLEbizAdapter |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
GetConfiguratorURLEbizProvABCSImpl |
GetConfiguratorURLEbizProvABCSImpl |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
GetConfiguratorURLEbizProvABCSImpl |
N/A |
GetConfiguratorURLEbizAdapter |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
GetConfiguratorURLEbizProvABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
GetConfiguratorURLEbizProvABCSImpl |
N/A |
GetConfiguratorURLEbizProvABCSImplExtension |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ItemBalanceEBS |
ItemBalanceEBS_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so it gets this global policy automatically attached. |
ItemBalanceEBS |
N/A |
AsyncResponseSimulator |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
ItemBalanceEBS |
N/A |
UpdateItemBalanceAgileProvABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
ItemBalanceResponseEBS |
ItemBalanceResponseEBS_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so it gets this global policy automatically attached. |
ItemBalanceResponseEBS |
N/A |
AsyncResponseSimulator |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
ItemBalanceResponseEBS |
N/A |
UpdateItemBalanceEbizReqABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
ItemEBSV2 |
ItemEBSV2_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so it gets this global policy automatically attached. |
ItemEBSV2 |
N/A |
SyncItemListEbizProvABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
ItemEBSV2 |
N/A |
AsyncResponseSimulator |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
ItemEBSV2 |
N/A |
UpdateItemListAgileProvABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
ItemResponseEBSV2 |
ItemResponseEBSV2_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so it gets this global policy automatically attached. |
ItemResponseEBSV2 |
N/A |
UpdateItemListEbizReqABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
ItemResponseEBSV2 |
N/A |
AsyncResponseSimulator |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
ItemResponseEBSV2 |
N/A |
SyncItemListAgileReqABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows EBS naming standards, so all references get this global policy automatically attached. |
ProcessEngineeringChangeOrderAgileReqABCSImpl |
QueueController |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
ProcessEngineeringChangeOrderAgileReqABCSImpl |
N/A |
ProcessEngineeringChangeOrderAgileReqABCSImplExtensionService |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ProcessEngineeringChangeOrderAgileReqABCSImpl |
N/A |
ChangeABSService |
oracle/wss_http_token_client_policy |
AgileWebServiceKey |
Directly |
Agile web services need the wss_http_token_client_policy policy attached using the AgileWebServiceKey when their service is called. This passes the Agile credentials to their web services. Without this directly attached policy, the global policy would be used and it would try to pass the AIA FMW credentials, which are not correct to get a user into Agile. |
ProcessEngineeringChangeOrderAgileReqABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ProcessEngineeringChangeOrderAgileReqABCSImpl |
N/A |
QueueProcessorServiceImplErrorReturn |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ProcessEngineeringChangeOrderAgileReqABCSImpl |
N/A |
EngineeringChangeOrderEBS |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
QueryEngineeringChangeOrderListEbizAdapter |
QueryEngineeringChangeOrderListEbizAdapter_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows Adapter naming standards, so it gets this global policy automatically attached. |
QueryEngineeringChangeOrderListEbizAdapter |
N/A |
QueryEngineeringChangeOrderListEbizAdapter |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueryItemBalanceListEbizAdapter |
QueryItemBalanceListEbizAdapter_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows Adapter naming standards, so it gets this global policy automatically attached. |
QueryItemBalanceListEbizAdapter |
N/A |
QueryItemBalanceListEbizAdapter |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueryItemListEbizAdapter |
QueryItemListEbizAdapter_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows Adapter naming standards, so it gets this global policy automatically attached. |
QueryItemListEbizAdapter |
N/A |
QueryItemListEbizAdapter |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueryResponsibilityEbizAdapter |
QueryResponsibilityEbizAdapter_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows Adapter naming standards, so it gets this global policy automatically attached. |
QueryResponsibilityEbizAdapter |
N/A |
QueryResponsibilityEbizAdapter |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueueProcessorService |
PollQueueControlForPendingMsg_RS_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that other ABCS are using. Since this composite does not following naming standards we must attach this as a local policy. |
QueueProcessorService |
PollQueueControlForPendingMsg |
N/A |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueueProcessorService |
N/A |
BPELSystem.default.QueueProcessorServiceImpl.QueueProcessorServiceImpl_1_0 |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that other ABCS are using. Since this composite does not following naming standards we must attach this as a local policy. |
QueueProcessorServiceImpl |
client |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that other ABCS are using. Since this composite does not following naming standards we must attach this as a local policy. |
QueueProcessorServiceImpl |
N/A |
ProcessEngineeringChangeOrderAgileReqABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that other ABCS are using. Since this composite does not following naming standards we must attach this as a local policy. |
QueueProcessorServiceImpl |
N/A |
UpdateQueueMsgStatus |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueueProcessorServiceImpl |
N/A |
UpdateOnlyQueueMsgResult |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueueProcessorServiceImpl |
N/A |
SelectECOQueueControl |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueueProcessorServiceImpl |
N/A |
UpdateQueueMsgResult |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueueProcessorServiceImpl_V2 |
client |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that other ABCS are using. Since this composite does not following naming standards we must attach this as a local policy. |
QueueProcessorServiceImpl_V2 |
N/A |
ProcessEngineeringChangeOrderAgileReqABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that other ABCS are using. Since this composite does not following naming standards we must attach this as a local policy. |
QueueProcessorServiceImpl_V2 |
N/A |
UpdateQueueMsgStatus |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueueProcessorServiceImpl_V2 |
N/A |
UpdateOnlyQueueMsgResult |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueueProcessorServiceImpl_V2 |
N/A |
SelectECOQueueControl |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueueProcessorServiceImpl_V2 |
N/A |
UpdateQueueMsgResult |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
QueueProcessorServiceImpl_V2 |
N/A |
ValidateEngineeringChangeOrderListAgileReqABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that other ABCS are using. Since this composite does not following naming standards we must attach this as a local policy. |
SyncBillOfMaterialsConfigurationEbizJMSConsumer |
SyncBillOfMaterialsConfigurationEbizJMSConsumer |
N/A |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
SyncBillOfMaterialsConfigurationEbizJMSConsumer |
N/A |
SyncBillOfMaterialsConfigurationListEbizReqABCSImpl.SyncBillOfMaterialsConfigurationListEbizReqABCSImpl_1_0 |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows JMSConsumer naming standards, so all references get this global policy automatically attached. |
SyncBillOfMaterialsConfigurationEbizJMSProducer |
SyncBillOfMaterialsConfigurationEbizJMSProducer_ep |
N/A |
oracle/no_authentication_service_policy |
N/A |
Directly |
The Ebiz Configurator servlet does not use security, so we attach the no_authentication_service_policy so that it doesn't try to invoke the Ebiz servlet with the incorrect security. |
SyncBillOfMaterialsConfigurationEbizJMSProducer |
N/A |
SyncBillOfMaterialsConfigurationEbizJMSProducer |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
SyncBillOfMaterialsConfigurationListAgileProvABCSImpl |
client |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
SyncBillOfMaterialsConfigurationListAgileProvABCSImpl |
N/A |
ExtensionServices |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
SyncBillOfMaterialsConfigurationListAgileProvABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
SyncBillOfMaterialsConfigurationListAgileProvABCSImpl |
N/A |
ConfiguratorTerminationService |
oracle/wss_http_token_client_policy |
AgileWebServiceKey |
Directly |
Agile web services need the wss_http_token_client_policy policy attached using the AgileWebServiceKey when their service is called. This passes the Agile credentials to their web services. Without this directly attached policy, the global policy would be used and it would try to pass the AIA FMW credentials, which are not correct to get a user into Agile. |
SyncBillOfMaterialsConfigurationListEbizReqABCSImpl |
SyncBillOfMaterialsConfigurationListEbizReqABCSImpl |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncBillOfMaterialsConfigurationListEbizReqABCSImpl |
N/A |
SyncBillOfMaterialsConfigurationListEbizReqABCSExtension |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
SyncBillOfMaterialsConfigurationListEbizReqABCSImpl |
N/A |
BillOfMaterialsConfigurationEBSV1 |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
SyncItemListAgileReqABCS |
client |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListAgileReqABCS |
N/A |
SyncItemListAgileReqABCSImpl |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
SyncItemListAgileReqABCSImpl |
SyncItemListAgileReqABCS |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListAgileReqABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListAgileReqABCSImpl |
N/A |
SyncItemListAgileReqABCSImplExtensionService |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListAgileReqABCSImpl |
N/A |
ItemEBSV2 |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListEbizAdapter |
SyncItemListEbizAdapter_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows Adapter naming standards, so it gets this global policy automatically attached. |
SyncItemListEbizAdapter |
N/A |
SycnItemListEbizAdapter |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
SyncItemListEbizProvABCSImpl |
SyncItemListEbizProvABCSImpl |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListEbizProvABCSImpl |
N/A |
SycnItemListEbizAdapter |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListEbizProvABCSImpl |
N/A |
SyncItemListEbizProvABCSImplExtension |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListEbizProvABCSImpl |
N/A |
TransformAppContextEbizService |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListEbizProvABCSImpl |
N/A |
GINServiceExtension |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListEbizProvABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListEbizProvABCSImpl |
N/A |
ItemResponseEBSV2 |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
SyncItemListEbizProvABCSImpl |
N/A |
ItemResponseErrorEBS |
oracle/wss_username_token_client_policy |
AIABasicCredentials |
Directly |
We attach a local policy in this case to break the transaction. The global transaction will have optimization on, which forces all SOAP calls to be local, so everything would be in the same transaction. We attach a local policy in this case so that we are NOT using a policy with optimize calls turned on so that we break the transaction. This is needed for Async-Delayed Response calls to work properly in an error scenario so the error gets returned to the Requester instead of just rolling back the entire transaction. |
TransformAppContextEbizService |
TransformAppContextEbizService |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that other ABCS are using. Since this composite does not following naming standards we must attach this as a local policy. |
TransformAppContextEbizService |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that the AIAAsyncErrorHandlingBPELProcess is using. Since this composite does not following naming standards we must attach this as a local policy. |
TransformAppContextEbizService |
N/A |
QueryRespEbizAdapter |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Directly |
Must attach the same global policy that the QueryResponsibilityEbizAdapter is using. Since this composite does not following naming standards we must attach this as a local policy. |
UpdateEngineeringChangeOrderListAgileProvABCSImpl |
UpdateEngineeringChangeOrderListAgileProvABCS |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
UpdateEngineeringChangeOrderListAgileProvABCSImpl |
N/A |
EngineeringChangeOrderEBS |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateEngineeringChangeOrderListAgileProvABCSImpl |
N/A |
MergeABSService |
oracle/wss_http_token_client_policy |
AgileWebServiceKey |
Directly |
Agile web services need the wss_http_token_client_policy policy attached using the AgileWebServiceKey when their service is called. This passes the Agile credentials to their web services. Without this directly attached policy, the global policy would be used and it would try to pass the AIA FMW credentials, which are not correct to get a user into Agile. |
UpdateEngineeringChangeOrderListAgileProvABCSImpl |
N/A |
EngineeringChangeOrderErrorResponseEBS |
oracle/wss_username_token_client_policy |
AIABasicCredentials |
Directly |
We attach a local policy in this case to break the transaction. The global transaction will have optimization on, which forces all SOAP calls to be local, so everything would be in the same transaction. We attach a local policy in this case so that we are NOT using a policy with optimize calls turned on so that we break the transaction. This is needed for Async-Delayed Response calls to work properly in an error scenario so the error gets returned to the Requester instead of just rolling back the entire transaction. |
UpdateEngineeringChangeOrderListAgileProvABCSImpl |
N/A |
ChangeStatusService |
oracle/wss_http_token_client_policy |
AgileWebServiceKey |
Directly |
Agile web services need the wss_http_token_client_policy policy attached using the AgileWebServiceKey when their service is called. This passes the Agile credentials to their web services. Without this directly attached policy, the global policy would be used and it would try to pass the AIA FMW credentials, which are not correct to get a user into Agile. |
UpdateEngineeringChangeOrderListAgileProvABCSImpl |
N/A |
UpdateEngineeringChangeOrderListAgileProvABCSImplExtension |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateEngineeringChangeOrderListAgileProvABCSImpl |
N/A |
ChangeABSService |
oracle/wss_http_token_client_policy |
AgileWebServiceKey |
Directly |
Agile web services need the wss_http_token_client_policy policy attached using the AgileWebServiceKey when their service is called. This passes the Agile credentials to their web services. Without this directly attached policy, the global policy would be used and it would try to pass the AIA FMW credentials, which are not correct to get a user into Agile. |
UpdateEngineeringChangeOrderListAgileProvABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateEngineeringChangeOrderListAgileProvABCSImpl |
N/A |
ChangeStatusDBAdapter |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateEngineeringChangeOrderListEbizReqABCSImpl |
UpdateECOEbizReqABCSImpl-ECOEBS |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
UpdateEngineeringChangeOrderListEbizReqABCSImpl |
N/A |
UserExt |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateEngineeringChangeOrderListEbizReqABCSImpl |
N/A |
EngineeringChangeOrderEBS |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateEngineeringChangeOrderListEbizReqABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateEngineeringChangeOrderListEbizReqABCSImpl |
N/A |
getUpdateEngineeringChangeOrderListService |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateEngineeringChangeOrderStatusEbizEventConsumer |
Eco_Cancellation_Event |
N/A |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
UpdateEngineeringChangeOrderStatusEbizEventConsumer |
Eco_Implementation_Event |
N/A |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
UpdateEngineeringChangeOrderStatusEbizEventConsumer |
Eco_Schedule_Event |
N/A |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
UpdateEngineeringChangeOrderStatusEbizEventConsumer |
Eco_Change_Status |
N/A |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
UpdateEngineeringChangeOrderStatusEbizEventConsumer |
Eco_ReSchedule_Event |
N/A |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
UpdateEngineeringChangeOrderStatusEbizEventConsumer |
N/A |
UpdateEngineeringChangeOrderListEbizReqABCSImpl_1_0 |
oracle/no_authentication_client_policy |
N/A |
Directly |
This is a direct subscription to an Ebiz event that does not require credentials. Therefore, a no_authentication_client_policy is attached. |
UpdateItemBalanceListAgileProvABCSImpl |
client |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
UpdateItemBalanceListAgileProvABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemBalanceListAgileProvABCSImpl |
N/A |
ItemABSService |
oracle/wss_http_token_client_policy |
AgileWebServiceKey |
Directly |
Agile web services need the wss_http_token_client_policy policy attached using the AgileWebServiceKey when their service is called. This passes the Agile credentials to their web services. Without this directly attached policy, the global policy would be used and it would try to pass the AIA FMW credentials, which are not correct to get a user into Agile. |
UpdateItemBalanceListAgileProvABCSImpl |
N/A |
UpdateItemBalanceListAgileABCSImplExtension |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemBalanceListAgileProvABCSImpl |
N/A |
ItemBalanceEBS |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemBalanceListAgileProvABCSImpl |
N/A |
ItemBalanceErrorEBS |
oracle/wss_username_token_client_policy |
AIABasicCredentials |
Directly |
We attach a local policy in this case to break the transaction. The global transaction will have optimization on, which forces all SOAP calls to be local, so everything would be in the same transaction. We attach a local policy in this case so that we are NOT using a policy with optimize calls turned on so that we break the transaction. This is needed for Async-Delayed Response calls to work properly in an error scenario so the error gets returned to the Requester instead of just rolling back the entire transaction. |
UpdateItemBalanceListEbizReqABCSImpl |
client |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
UpdateItemBalanceListEbizReqABCSImpl |
N/A |
ItemBalanceService |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemBalanceListEbizReqABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemBalanceListEbizReqABCSImpl |
N/A |
ItemBalanceEBS |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemBalanceListEbizReqABCSImpl |
N/A |
UserExit |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemListAgileProvABCSImpl |
UpdateItemListAgileProvABCS |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
UpdateItemListAgileProvABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemListAgileProvABCSImpl |
N/A |
ItemEBSV2 |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemListAgileProvABCSImpl |
N/A |
ItemABSService |
oracle/wss_http_token_client_policy |
AgileWebServiceKey |
Directly |
Agile web services need the wss_http_token_client_policy policy attached using the AgileWebServiceKey when their service is called. This passes the Agile credentials to their web services. Without this directly attached policy, the global policy would be used and it would try to pass the AIA FMW credentials, which are not correct to get a user into Agile. |
UpdateItemListAgileProvABCSImpl |
N/A |
UpdateItemListAgileProvABCSImplExtension |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemListAgileProvABCSImpl |
N/A |
ItemErrorResponseEBSV2 |
oracle/wss_username_token_client_policy |
AIABasicCredentials |
Directly |
We attach a local policy in this case to break the transaction. The global transaction will have optimization on, which forces all SOAP calls to be local, so everything would be in the same transaction. We attach a local policy in this case so that we are NOT using a policy with optimize calls turned on so that we break the transaction. This is needed for Async-Delayed Response calls to work properly in an error scenario so the error gets returned to the Requester instead of just rolling back the entire transaction. |
UpdateItemListEbizReqABCSImpl |
UpdateItemListEbizReqABCSImpl - ItemEBS |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
UpdateItemListEbizReqABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemListEbizReqABCSImpl |
N/A |
UserExt |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemListEbizReqABCSImpl |
N/A |
ItemEBS |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
UpdateItemListEbizReqABCSImpl |
N/A |
getItemAttrListService |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ValidateEngineeringChangeOrderListAgileReqABCSImpl |
client |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
ValidateEngineeringChangeOrderListAgileReqABCSImpl |
N/A |
EngineeringChangeOrderEBS |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ValidateEngineeringChangeOrderListAgileReqABCSImpl |
N/A |
ChangeABSService |
oracle/wss_http_token_client_policy |
AgileWebServiceKey |
Directly |
Agile web services need the wss_http_token_client_policy policy attached using the AgileWebServiceKey when their service is called. This passes the Agile credentials to their web services. Without this directly attached policy, the global policy would be used and it would try to pass the AIA FMW credentials, which are not correct to get a user into Agile. |
ValidateEngineeringChangeOrderListAgileReqABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ValidateEngineeringChangeOrderListAgileReqABCSImpl |
N/A |
AIAErrorTaskAdministrationProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ValidateEngineeringChangeOrderListAgileReqABCSImpl |
N/A |
QueueProcessorServiceImplErrorReturn |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ValidateEngineeringChangeOrderListAgileReqABCSImpl |
N/A |
ValidateEngineeringChangeOrderListAgileReqABCSImplExtensionService |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ValidateEngineeringChangeOrderListEbizAdapter |
ValidateEngineeringChangeOrderListEbizAdapter_ep |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows Adapter naming standards, so it gets this global policy automatically attached. |
ValidateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
ValidateEngineeringChangeOrderListEbizAdapter |
N/A |
N/A |
N/A |
Policies cannot be attached to JCA Adapters. |
ValidateEngineeringChangeOrderListEbizProvABCSImpl |
ValidateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
oracle/aia_wss_saml_or_username_token_service_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so it gets this global policy automatically attached. |
ValidateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
EngineeringChangeOrderErrorResponseEBS |
oracle/wss_username_token_client_policy |
AIABasicCredentials |
Directly |
We attach a local policy in this case to break the transaction. The global transaction will have optimization on, which forces all SOAP calls to be local, so everything would be in the same transaction. We attach a local policy in this case so that we are NOT using a policy with optimize calls turned on so that we break the transaction. This is needed for Async-Delayed Response calls to work properly in an error scenario so the error gets returned to the Requester instead of just rolling back the entire transaction. |
ValidateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
AIAAsyncErrorHandlingBPELProcess |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ValidateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
EngineeringChangeOrderResponseEBS |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ValidateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
UserExt |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |
ValidateEngineeringChangeOrderListEbizProvABCSImpl |
N/A |
ValidateECOService |
oracle/aia_wss10_saml_token_client_policy_OPT_ON |
N/A |
Globally |
Follows ABCS naming standards, so all references get this global policy automatically attached. |