Oracle Utilities Customer Care and Billing

Installation Guide

Release 2.4.0 Service Pack 2

E37713-03

May 2014

Oracle Utilities Customer Care and Billing Installation Guide

E37713-03

Copyright © 2000, 2014, Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

Preface

This guide describes how to install Oracle Utilities Customer Care and Billing.

Audience

Oracle Utilities Customer Care and Billing Installation Guide is intended for system administrators installing Oracle Utilities Customer Care and Billing.

To use this document you should have:

•

Experience installing and configuring application servers and other software

•

Administrative privileges on the host where you are installing the software

Related Documents

For more information, refer to these Oracle documents:

Installation Guides and Release Notes

•

Oracle Utilities Customer Care and Billing V2.4.0.2 Release Notes

•

Oracle Utilities Customer Care and Billing V2.4.0.2 Quick Install Guide

•

Oracle Utilities Customer Care and Billing V2.4.0.2 Installation Guide

•

Oracle Utilities Customer Care and Billing V2.4.0.2 Database Administrator’s Guide

•

Oracle Utilities Customer Care and Billing V2.4.0.2 Optional Product Installation Guide

Administration and Business Process Guides

•

Oracle Utilities Customer Care and Billing V2.4.0.2 Administration Guide

•

Oracle Utilities Customer Care and Billing V2.4.0.2 Business Process Guide

•

Oracle Utilities Application Framework V4.2.0.2 Administration Guide

•

Oracle Utilities Application Framework V4.2.0.2 Business Process Guide

Supplemental Documents

•

Oracle Utilities Customer Care and Billing V2.4.0.2 Batch Server Administration Guide

•

Oracle Utilities Customer Care and Billing V2.4.0.2 Server Administration Guide

•

Oracle Utilities Customer Care and Billing V2.4.0.2 Security Guide

Updates to this Documentation

This documentation is provided with the version of the product indicated. Additional and updated information about the operations and configuration of the product is available from the Knowledge Base section of My Oracle Support (http://support.oracle.com). Please refer to My Oracle Support for more information.

Conventions

The following text conventions are used in this document:

Convention

Meaning

boldface

Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary.

italic

Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values.

monospace

Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.

Overview

This chapter provides an overview of the installation of Oracle Utilities Customer Care and Billing, including:

Installation Overview

Installing Oracle Utilities Customer Care and Billing involves the following steps:

1.

Review the different tiers of the application architecture as described in Chapter 2 : Application Architecture Overview .

2.

Understand the hardware requirements for installing the application and the supported platforms for the application and database servers as described in Chapter 3 : Supported Platforms and Hardware Requirements .

Note: The installation and administration of the database server tier is described in detail in the document Oracle Utilities Customer Care and Billing Database Administrator’s Guide.

3.

Review the different types of application installations as described in Chapter 4 : Installation Types .

4.

Plan your installation as described in Chapter 5 : Planning the Installation .

5.

Install the database as described in Chapter 6 : Installing the Database , and in the document Oracle Utilities Customer Care and Billing Database Administrator’s Guide.

6.

Install all required third-party software as described in Chapter 7 : Installing Application Server Prerequisite Software . The required software is listed for each supported combination of operating system and application server.

7.

If you are using the WebSphere application server on AIX, configure your server as described in Chapter 8 : Configuring WebSphere Application Server .

8.

Install the framework for the application as described in Chapter 9 : Installing the Application Server Component of Oracle Utilities Application Framework .

9.

Install Oracle Utilities Customer Care and Billing as described in Chapter 10 : Installing the Application Server Component of Oracle Utilities Customer Care and Billing .

10.

Install the most recent Oracle Utilities Customer Care and Billing Service Pack as described in Chapter 11 : Installing Version 2.4.0 Service Pack 2 .

11.

Follow the installation guidelines described in Chapter 12 : Additional Tasks .

Application Architecture Overview

This section provides an overview of the Oracle Utilities Application Framework application architecture.

Application Architecture

The Oracle Utilities Application Framework application is deployed on multiple tiers.

Please see the Oracle Utilities Customer Care and Billing Server Administration Guide for a more detailed description of the application architecture and individual tiers.

Tier 1: Desktop/Client, or Presentation Tier

This tier is implemented in a browser-based client. Users use a desktop client web browser to log in to and use the Oracle Utilities Customer Care and Billing application. Note also that a desktop machine running Microsoft Windows and the Oracle client is required to perform some of the Oracle Utilities Customer Care and Billing product installation steps.

Tier 2: Web Application / Business Application Server, or Business Logic Tier

This tier is implemented in a web application server, business application server, or the batch server. The business application component can be installed as part of the web application server, or as a separate component. Except where explicitly noted, most of the Oracle Utilities Application Framework installation documentation assumes that the web application and business application servers reside together. The batch infrastructure will also run within this tier. You can have multiple batch server instances that serve the application.

Tier 3: Database, or Persistence Tier

This tier is implemented in a database server. The database server stores data maintained by the Oracle Utilities Customer Care and Billing application. More specifically, the database tier contains the data server files and database executables that physically store the tables, indexes, and other database objects for your system.

Supported Platforms and Hardware Requirements

This section gives an overview of the tiers on which the product is implemented, and shows each of the operating system/server combinations that the product is certified for. It includes:

•

Software and Hardware Considerations

•

Requirements by Tier

•

Supported Platforms

•

Support for Software Patches and Upgrades

Software and Hardware Considerations

There are many factors that can influence software and hardware decisions. For example, your system may have to satisfy specific performance, availability, or scalability requirements, or to support running in a language other than English. These business requirements, together with the chosen system architecture, should be used in initial software and hardware planning.

Some of the questions that you should answer before beginning the installation include:

•

On which hardware platform and operating system will Oracle Utilities Customer Care and Billing be deployed?

•

Which web server product will Oracle Utilities Customer Care and Billing deploy on?

•

Which database product will Oracle Utilities Customer Care and Billing deploy on?

•

Do you plan to deploy multiple Oracle Utilities Customer Care and Billing instances on the same physical server?

•

How do you plan to deploy the Oracle Utilities Customer Care and Billing?

Web/application/database on the same physical server

Web/application on one server and database on separate server

Each component on its own server

For detailed descriptions of various deployment architecture choices that may aid in planning, please see the document Oracle Utilities Application Framework Architecture Guidelines, available on My Oracle Support (Article ID 807068.1).

The final hardware and software decisions must comply with the specific requirements of the Oracle Utilities Customer Care and Billing product, as described in the rest of this chapter.

Requirements by Tier

The application is deployed on multiple Tiers:

•

Tier 1, Desktop

•

Tier 2, Web/Business Application Server

•

Tier 3, Database Server

Tier 1, Desktop: Software and Hardware Requirements

Configuration

Processor

Memory (RAM)

Monitor Display

Minimum

Pentium IV - 2.0 GHz

1024 MB

1024X768**

16-bit Color

Recommended*

Pentium IV - 3.0+ GHz,

Or any Core 2 Duo

Or any Athlon X2

2048 MB

1280X1024*

32-bit Color

* The Recommended configuration improves client performance.

** To reduce the amount of scrolling required for pages that are longer than 768 or 1024 pixels, consider placing a monitor into vertical position (with narrow side on the bottom).

Web Browser Requirements

The following operating system / web browser software is supported:

•

Windows 7 (32-bit or 64-bit) with Internet Explorer 9.x or 10.x

Notes: Internet Explorer 9.x and 10.x must have Compatibility Mode enabled.

Tier 2, Web/Business Application Server: Software and Hardware Requirements

Please consult the Supported Platforms to determine which web application servers can be used with the operating system that will be hosting this tier.

The recommendations that follow are based on a standard installation with both the web application and business application servers on the same machine and the system running with the default values. The default values may not support a production environment. You should adjust these values according to your production needs. Refer to the Server Administration Guide on how to change the default values. The minimum resource requirements exclude third-party software installation requirements. Refer to the third- party vendors for specific requirements. The following sizing excludes the Oracle database server installation.

Memory Requirements

For each application server environment a minimum of 4 GB of real memory is required, plus 6GB of swap space.

Disk Space Requirements

The approximate disk space requirements in a standard installation are as follows:

Location

Size

Usage

$SPLEBASE

5 GB minimum

This location is where the application and

Framework get installed.

Startup, shutdown and other online log files are stored here. The size and space that is used should be monitored because various debugging options can significantly affect the size of log files.

$SPLAPP

2 GB minimum

This location is used for storing batch log files and output from batch jobs. The size of this space should be influenced by which batches are run and how often, and the amount of debugging information that is collected.

Location of the application web work files on the web servers

1.5 GB minimum

This location is used by the various web server vendors to expand the application. It should be considered when installing these products. Refer to the individual web server documentation to determine the location

of the temporary files.

Installation temporary area

4 GB

The application gets installed from this location. You need enough space to uncompress the files and install the application.

Oracle data area

4 GB minimum

This location is where the Oracle database data files are stored. The size of this space should be based on the requirements of the production environment. For an initial or demo database install 4 GB should be sufficient.

Tier 3, Database Server: Software and Hardware Requirements

See the section Supported Platforms for supported database servers.

Supported Platforms

The installation has been tested and certified to operate on many operating system, application server, and database server combinations. For the software requirements for each of these combinations, see Chapter 7 : Installing Application Server Prerequisite Software for more information. This section includes the following topics:

•

Operating Systems and Application Servers

•

Oracle Database Servers

•

Oracle WebLogic Server Information

Operating Systems and Application Servers

The following table details the operating system and application server combinations on which this version of Oracle Utilities Customer Care and Billing is supported.

Operating System and Web Browser (Client)

Operating System

(Server)

Chipset

Application Server

Database

Windows 7*

(Internet Explorer 9.x or 10.x,in Compatibility Mode)

AIX 7.1 TL1

POWER 64-bit

WebLogic 10.3.6

WebSphere 8.5/8.5.5

Oracle 11.2.0.1+

Oracle 12.1.0.1+

Oracle Linux 5.4/5.8/6.2/6.3/6.4/6.5 (64-bit) (based on Red Hat Enterprise Linux** 5.4/5.8/6.2/6.3/6.4/6.5 (64-bit))

x86_64

WebLogic 10.3.6

Oracle 11.2.0.1+

Oracle 12.1.0.1+

Oracle Solaris 10 or 11

(64-bit)

SPARC

WebLogic 10.3.6

Oracle 11.2.0.1+

Oracle 12.1.0.1+

Windows Server 2008 R2 (64-bit)

Windows Server 2012 (64-bit)

Windows Server 2008 (32-bit)

x86_64

WebLogic 10.3.6

Oracle 11.2.0.1+

Oracle 12.1.0.1+

HP-UX 11.31 (64-bit)

ia64

WebLogic 10.3.6

Oracle 11.2.0.1+

Oracle 12.1.0.1+

*Oracle support for Windows XP ended December 2013. Microsoft support for Windows XP ended April 2014.

**Oracle Utilities Customer Care and Billing is tested and supported on the versions of Oracle Linux specified. Because Oracle Linux is 100% userspace-compatible with Red Hat Enterprise Linux, Oracle Utilities Customer Care and Billing also is supported on Red Hat Enterprise Linux for this release.

Oracle Database Servers

Oracle Utilities Customer Care and Billing version 2.4.0.2 is supported with Oracle Database Server 11.2.0.2 and Oracle Database 12.1.0.1.0 on all of the operating systems listed above.

The following Oracle Database Server Editions are supported:

•

Oracle Database Enterprise Edition

•

Oracle Database Standard Edition

Note: Oracle Database Enterprise Edition and the Partitioning and Advanced Compression options are not mandatory but recommended. Standard Edition should only be considered suitable for very small, pilot projects or development environments where scalability, performance, and database size-on-disk are not important considerations. Oracle Database Enterprise Edition, including the Advanced Compression and Partitioning options, is strongly recommended in all other situations.

The Oracle 11.2.0.1/12.1.0.1.0 client is required for this version of the database server.11.2.0.3/12.1.0.1.0.

Oracle WebLogic Server Information

The following Oracle WebLogic Server Editions are supported:

•

Oracle WebLogic Server Standard Edition

•

Oracle WebLogic Server Enterprise Edition

Support for Software Patches and Upgrades

Due to the ongoing nature of software improvement, vendors will issue patches and service packs for the operating systems, application servers and database servers on top of specific versions that Oracle Utilities Application Framework has been tested with.

If it is necessary to apply an upgrade, please do so in a test environment that is running on the same platform as your production environment prior to updating the Oracle Utilities Customer Care and Billing production environment.

The exceptions from this rule are Hibernate software version 4.1.0. This version should not be upgraded.

Always contact Oracle Utilities Customer Care and Billing support prior to applying vendor updates that do not guarantee backward compatibility.

Installation Types

This section provides an overview of the different types of application installation.

Initial Installation Compared with Upgrade Installation

Customers installing this version of Oracle Utilities Customer Care and Billing application may or may not have used previous versions of the application.

•

If you have not installed and used previous versions of Oracle Utilities Customer Care and Billing, the installation process will create files as well as a database on your system. Depending on what data you choose to install in the database, the database install process is referred to as either initial install or demo install.

•

If you have installed and used a previous version of Oracle Utilities Customer Care and Billing, the installation process will still create and / or overwrite files on your system. For the database however, the process will upgrade the existing database to the current version of Oracle Utilities Customer Care and Billing. This process is referred to as an upgrade install. Note that there are restrictions on which previous Oracle Utilities Customer Care and Billing versions can be upgraded to the current version.

Supported Upgrade Paths

The system supports the following upgrade paths:

•

Upgrade from Oracle Utilities Customer Care and Billing 2.2.0 Service Pack 10 to 2.4.0 Service Pack 2

•

Upgrade from Oracle Utilities Customer Care and Billing 2.3.1 Service Pack 8 to 2.4.0 Service Pack 2

•

Upgrade from Oracle Utilities Customer Care and Billing 2.4.0 to 2.4.0 Service Pack 2

•

Upgrade from Oracle Utilities Customer Care and Billing2.4.0 Service Pack 1 to 2.4.0 Service Pack 2.

Upgrade Procedure

For an upgrade install, you must upgrade all of the following components

•

Database components. Refer to the "Upgrade Install" section of the Oracle Utilities Customer Care and Billing Database Administrator's Guide for more information.

•

Application components. Refer to Chapter 11 : Installing Version 2.4.0 Service Pack 2 for the steps involved in upgrading.

Database Installation: Initial Install Compared with Demo Install

An initial install and demo install both start with an empty database. In the case of initial install, demo data is not populated into the database by the installation process. This installation type is typically used for production environments.

In contrast, the demo install process populates the database with demo data. This installation type is typically used for demo and testing environments.

Planning the Installation

This chapter provides information for planning an Oracle Utilities Customer Care and Billing installation, including:

•

Installation and Configuration Overview

•

Before You Install

•

Before You Upgrade

•

Installation Checklist

•

Installation and Configuration Worksheets

Installation and Configuration Overview

The following diagram provides an overview of the steps that need to be taken to install and configure Oracle Utilities Customer Care and Billing:

Before You Install

Refer to My Oracle Support for up-to-date additional information on installing Oracle Utilities Customer Care and Billing.

Before You Upgrade

The Java code directory has been restructured in version 2.4.0 in order to better organize the components. Customers who are upgrading may have to change the imports on CM Java classes they have written themselves to conform to the new structure. For details about the new directory structure, see the spreadsheets in the "Package Organization Summary.zip" file, which is located with the documentation in the application.

Installation Checklist

The following checklist will help guide you through the installation process of the application tier. The details for each step are presented in subsequent chapters.

1.

Create Group/User ID.

2.

Install prerequisite software (for complete details about installing and configuring the prerequisite third-party software for your specific platform, see Chapter 7 : Installing Application Server Prerequisite Software ):

•

Oracle client 11.2.0.1/12.1.0.1.0

•

Java 6

•

JRockit (if using WebLogic on Linux as an application server)

•

Hibernate 4.1.0

•

Micro Focus Server 5.1 WrapPack 7 or WrapPack 8

3.

Install Optional Software.

The following software is not required for Oracle Utilities Customer Care and Billing to operate:

•

Micro Focus Server Express, with patches (required for recompiling COBOL)

4.

Install web server.

•

Oracle WebLogic

•

IBM WebSphere

Note: If you are upgrading and you are currently running Oracle Application Server please contact your Global Support Representative.

5.

Verify that the software installed.

6.

Set up environment variables.

7.

Install Oracle Utilities Application Framework.

8.

Install Oracle Utilities Application Framework prerequisite single fixes.

9.

Install Oracle Utilities Customer Care and Billing.

10.

Deploy Oracle Utilities Customer Care and Billing application.

11.

Complete postinstallation tasks.

12.

Optional third-party product integration (such as web self service or reporting tools).

Installation and Configuration Worksheets

During the installation and configuration of the application you will need to provide a variety of system values. These worksheets will assist you in providing that information. They should be completed before installing the application framework, as described in the Chapter 9 : Installing the Application Server Component of Oracle Utilities Application Framework . No Customer Install Value fields should be left blank.

Note: Some web application server information will not be available until the software installation steps have been completed as described in the Chapter 7 : Installing Application Server Prerequisite Software .

Installation Menu Functionality Overview

The main configuration menu is structured so that related variables and/or options are grouped together and are associated by a menu item number. To access a particular group of variables and options, enter the menu item number associated with that group. Each option within that group is displayed in turn on the screen, along with a prompt so that you can type the desired value for the option, if it is not the same as the default or current value.

When performing the initial installation you need to go through all menu options. The menu options may have a default value, a list of valid values and a validation check.

On each option prompt you can keep the current value by simply leaving the input line empty. In order to erase a variable value you need to enter one dot ("."). The leading spaces will be trimmed out on each values entered.

Note: When working with the menu you will see the following:

•

Valid Values: [ALFANUM]. This indicates you will need to enter an alphanumeric value in the prompt.

•

Valid Values: [NUM]. This indicates you will need to enter an numeric value in the prompt.

When all options are set, type <P> at the main menu prompt option. This will save the option values selected throughout the configuration.

During this processing the global variables are validated and the configuration file <SPLEBASE>/etc/ENVIRON.INI is created or updated. This file contains all the variables inputted and calculated. These are needed by the next part of the installation process.

To exit the configuration utility without saving any of the values entered, type <X> and 'Enter'

Installation Menu Functionality Details

The Environment Installation Utility requires that Oracle Client Home is set in the path for the user performing the installation.

Prior to running the installation utility you will need to review the supported platforms document to ensure you have all of the Third Party software installed.

In this menu if the variables are set prior to execution, that value will be defaulted by the installation utility when performing the installation.

When the installation has been completed successfully, the values will be written to an ENVIRON.INI file. When splenviron.sh / cmd is executed, it will read from the ENVIRON.INI file to set the environment variables.

In the worksheets there are three different types of values given:

•

Default Values are the values that will be defaulted when running the installation utility.

•

Security Values denote values that should be changed when in production.

•

Example Values are values that can be used for a default installation.

Note: The production environment should not be run with default values. See the Oracle Utilities Customer Care and Billing Server Administration Guide for additional information about configuring these values.

When you enter passwords you will not see the password characters on the screen because they are entered in silent mode. Passwords are encrypted when the values are entered.

Install the Oracle Client software specified in the section Supported Platforms prior to running any of the installation utilities.

The following prompt will appear when executing the installation utility:

Enter Oracle Client Home Directory (<ENTER> quit):

Note: If the environmental variable ORACLE_CLIENT_HOME is set, the install script will validate the variable. If it passes the validation you will not be prompted for it. This is needed in order to run Perl installation utilities.

Encryption Methods

When the application server choice is WebLogic, the Oracle Utilities Application Framework installation uses the Oracle WebLogic API to encrypt the User ID and password that perform admin functions for the WebLogic application servers. Please refer to the Oracle WebLogic documentation for further information about the encryption.

The Oracle Utilities Application Framework installation also uses industry standard cryptography to encrypt passwords that are prompted within the installation.

In each case these password are entered in the command line but the inputted values are not reflected on the screen when performing the installation.

Third Party Software Configuration

************************************

* Environment Installation Options *

************************************

1. Third Party Software Configuration

Oracle Client Home Directory:

Web Java Home Directory:

Child JVM Home Directory:

COBOL Home Directory:

Hibernate JAR Directory:

ONS JAR Directory:

Database Home Directory:

Web Application Server Home Directory:

ADF Home Directory:

OIM OAM Enabled Environment:

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Oracle Client Home Directory

ORACLE_CLIENT_HOME

The home directory of the Oracle Client. The application will use the Perl included under this Oracle Client.

Example Location:

/oracle/client/product/11.2.0.2

Web Java Home Directory

JAVA_HOME

Java home that will be used by the web application server.

Example Location:

/ouaf/java/jdk1.6.0_20

Child JVM Home Directory

CHILD_JVM_JAVA_HOME

Java home that will be used by the child java process that handles COBOL related requests.

Example Location:

/ouaf/java/jdk1.6.0_20

COBOL Home Directory

COBDIR

COBOL installation location directory.

Example Location:

/opt/SPLcobAS51WP6

Hibernate JAR Directory

HIBERNATE_JAR_DIR

Location on the disk where the hibernate4 jar files are installed.

*ONS JAR Directory

ONS_JAR_DIR

Location on the disk where the ons-11.2.0.2.jar file is installed.

**Required for Oracle RAC installation. See the Server Administration Guide for more information.

Database Home Directory

DATABASE_HOME

Location on the disk where database client is installed for your particular installation.

Example Location for Oracle Database:

/oracle/client/product/11.2.0.2

Note: This value will be the same as the previously entered value for Oracle client.

Web Application Server Home Directory

WEB_SERVER_HOME

Location on the disk where the application server is installed.

Example Location:

WebLogic: /ouaf/middleware/wlserver_10.3

To validate the home directory, check if the following jar files exist in the appropriate path:

$WEB_SERVER_HOME/server/lib/weblogic.jar

%WEB_SERVER_HOME%\server\lib\weblogic.jar

WebSphere:

/ouaf/IBM/WebSphere7/AppServer

WebSphere ND:

/ouaf/IBM/WebSphere70ND/

* ADF Home Directory

ADF_HOME

Location on the disk where ADF is installed.

Example Location:

/ouaf/jdev11_1_1_4

OIM OAM Enabled Environment

OPEN_SPML_ENABLED_ENV

Denotes if an environment will be integrating with Oracle Identity Manager for user propagation.

Valid values:

true

false

Defaulted value: false

* Denotes optional Menu Options that may be required for the product installation and variables.

** In order to activate the RAC FCF, the application needs the external ons.jar file, version 11.2.0.2. This ons.jar is located under the Oracle Database Software 11.2.0.2, at the following path:

$ORACLE_HOME/opmn/lib/ons.jar

The ons.jar should be copied to the Application Server. During the OUAF installation the relevant option should be populated with the folder location of the ons.jar.

Environment Installation Options

50. Environment Installation Options

Environment Mount Point:

Log Files Mount Point:

Environment Name:

Database Type:

Web Application Server Type:

Install Application Viewer Module:

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Environment Mount Point

<SPLDIR>

The mount point into which the application is installed. For example:

/ouaf for UNIX and C:\ouaf for Windows.

This mount point MUST exist and the CCB administrator user ID MUST be able to write to this directory. (This is the user ID that is created specifically to administer the (CCB) environments; the default is cissys). The installation sets permissions on all subdirectories installed under this directory.

See <SPLENVIRON> below for more information on how this mount point is used.

Log File Mount Point

<SPLDIROUT>

A mount point that will contain any application output or application logs. Example value is /ouaf/sploutput for UNIX installation or C:\ouaf\sploutput for Windows.

This mount point MUST exist and the CCB administrator user ID MUST be able to write to this directory. (This is the user ID that is created specifically to administer the (CCB) environments; the default is cissys).

For each environment initialized, the application logs will be written to the directory <SPLDIROUT>/

<SPLENVIRON>

Note: Later in the installation the splenviron.sh (splenviron.cmd ) script will set the $SPLOUTPUT (%SPLOUTPUT%) environment variable to point to:<SPLDIROUT>/<SPLENVIRON>

Environment Name

<SPLENVIRON>

A descriptive name to be used as both a directory name under the mount point <SPLDIR> and an environment descriptor. This value typically identifies the purpose of the environment. For example, DEV01 or CONV.

On installation a directory <SPLDIR>/<SPLENVIRON> is created, under which the Oracle Utilities Application Framework and Oracle Utilities Customer Care and Billing software resides.

When multiple environments are set up on the machine you will typically have directories such as:

/ouaf/DEV01/....

/ouaf/CONV/....

Each of these contains a complete version of the Oracle Utilities Application Framework and Oracle Utilities Customer Care and Billing.

Note: Later in the installation process, the splenviron.sh (splenviron.cmd) script will set $SPLEBASE ( %SPLEBASE%) environment variable to point to <SPLDIR>/<SPLENVIRON>

Database Type

<CMPDB>

Type of a database to connect an environment to.

Valid values:

oracle: Oracle

Defaulted value: oracle

Note: Not all database types are supported on all platforms; refer to the Supported Platforms section for details.

oracle

Web Application Server Type

<SPLWAS>

A web application server for the environment to be used. The following value must be selected:

Valid values:

WLS: WebLogic

WAS: WebSphere

WASND: WebSphere ND

Note: Not all web application servers are supported on all platforms; refer to Supported Platforms section for details.

Installation Application Viewer Module

<WEB_ISAPPVIEWER>

Denotes if the Application Viewer Web Module will be installed in the environment. When this value is set to false the application viewer will not be accessible in the environment.

Valid values:

true: Application Viewer module will be installed.

false: Application Viewer module will not be installed.

Defaulted value: true

Note: When the value of false is selected, the Application Viewer will only be installed at a later date by a complete reinstall of the application.

Environment Description

1. Environment Description

Environment Description:

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Environment Description

DESC

This is a free form text field to describe the purpose of the environment.

WebLogic Business Application Server Configuration

The WebLogic parameters below and in the worksheet are for a WebLogic installation.

2. Business Application Server Configuration

Business Server Host: <machine_name>

WebLogic Server Name: myserver

Business Server Application Name: SPLService

MPL Admin Port Number:

MPL Automatic startup: false

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Business Server Host

BSN_WLHOST

The host name on which business application server resides.

Default value: <current server name>

WebLogic Server Name

BSN_WLS_SVRNAME

The name of the WebLogic server where the business application resides.

Default value: myserver

Note: If there is not a previously created WebLogic server, take the default value of "myserver".

Business Server Application Name

BSN_APP

The name of the business application server.

Default value: SPLService

MPL Admin Port number

MPLADMINPORT

The port number for the Multi Purpose Listener (MPL) Admin Server.

Example value: 6502

MPL Automatic Startup

MPLSTART

Automatically starts the MPL Listener whenever environment starts.

Default value: false

WebSphere ND Business Application Server Configuration

The WebSphere Network Deployment parameters below and in the worksheet are for a WebSphere ND installation.

2. Business Application Server Configuration

Business Server Host: <machine_name>

Bootstrap Port:

WebSphere Server Name:

WebSphere Node Name:

Business Server Application Name: SPLService

MPL Admin Port Number:

MPL Automatic startup:

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Business Server Host

BSN_WLHOST

The host name on which business application server resides.

Default value: <current server name>

Bootstrap Port

BSN_WASBOOTSTRAPPORT

The boot strap port number allows the web module to communicate with the EJB module.

WebSphere Server Name

BSN_SVRNAME

The WebSphere ND Application Server to host the OUAF application.

Each OUAF must be installed in a unique WebSphere ND Application Server.

Default value: server2

WebSphere Node Name

BSN_NODENAME

The name of the WebSphere ND Node Name where the WebSphere ND Application Server is running.

Business Server Application Name

BSN_APP

The name of the business application server.

Default value: SPLService

MPL Admin Port number

MPLADMINPORT

The port number for the Multi Purpose Listener (MPL) Admin Server.

Example value: 6502

MPL Automatic Startup

MPLSTART

Automatically starts the MPL Listener whenever environment starts.

Default value: false

WebSphere Basic Business Application Server Configuration

The WebSphere parameters below and in the worksheet are for a WebSphere installation.

2. Business Application Server Configuration

Business Server Host: <machine_name>

Bootstrap Port:

WebSphere Server Name:

WebSphere Node Name:

Business Server Application Name: SPLService

MPL Admin Port Number:

MPL Automatic startup:

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Business Server Host

BSN_WLHOST

The host name on which business application server resides.

Default value: <current server name>

Bootstrap Port

BSN_WASBOOTSTRAPPORT

The boot strap port number allows the web module to communicate with the EJB module.

WebSphere Server Name

BSN_SVRNAME

The WebSphere Application Server to host the OUAF application.

Each OUAF must be installed in a unique WebSphere Application Server.

Default value: server2

WebSphere Node Name

BSN_NODENAME

The name of the WebSphere Node Name where the WebSphere Application Server is running.

Business Server Application Name

BSN_APP

The name of the business application server.

Default value: SPLService

MPL Admin Port number

MPLADMINPORT

The port number for the Multi Purpose Listener (MPL) Admin Server.

Example value: 6502

MPL Automatic Startup

MPLSTART

Automatically starts the MPL Listener whenever environment starts.

Default value: false

WebLogic Web Application Server Configuration

The WebLogic parameters below and in the worksheet are for a WebLogic installation.

3. Web Application Server Configuration

Web Server Host: <machine_name>

Web Server Port Number:

Web Context Root:

WebLogic JNDI User ID:

WebLogic JNDI Password:

WebLogic Admin System User ID:

WebLogic Admin System Password:

WebLogic Server Name: myserver

Web Server Application Name: SPLWeb

Application Admin User ID:

Application Admin Password:

Expanded Directories: true

Application Viewer Module: true

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Web Server Host

WEB_WLHOST

The host name on which the web application server resides.

Default value: <current server name>

Web Server Port Number

WEB_WLPORT

A unique port number within the system that will be assigned to the HTTP port. This is the port number that is used as a part of the client URL request to connect to the host.

Example value: 6500

Web Context Root

WEB_CONTEXT_ROOT

A context root name that allows customers to run multiple instances of web application on the same server.

Default value: ouaf

WebLogic JNDI User ID

WEB_WLSYSUSER

The user ID the application uses to connect to the EJB component through JNDI. This is the EJB container user ID.

Note: The required value for an initial installation is "system".

This is a security value.

WebLogic JNDI Password

WEB_WLSYSPASS

The password the application uses to connect to the EJB component through JNDI

Note: The required value for an initial installation is "ouafadmin". This value will be saved in encrypted format.

This is a security value.

WebLogic Admin System User ID

WLS_WEB_WLSYSUSER

The user ID to log in to the Oracle WebLogic console and to administer Oracle WebLogic. The Oracle WebLogic startup and stop script also utilizes this user ID

Note: The installation utility will prompt you to enter "Y" to encrypt. For an initial installation, enter Y/y and specify the required value "system".

This is a security value.

WebLogic Admin System Password

WLS_WEB_WLSYSPASS

The password to login to Oracle WebLogic console and to administer Oracle WebLogic. The Oracle WebLogic startup and stop script also utilize this password.

Note: The installation utility will prompt you to enter "Y" to encrypt. For an initial installation, enter Y/y, and specify the required value "ouafadmin".

This is a security value.

WebLogic Server Name

WEB_WLS_SVRNAME

The name of the WebLogic server where the web application resides.

Default value: myserver

Note: For an initial installation, use the default value of "myserver".

Web Server Application Name

WEB_APP

The name of the web application server.

Default value: SPLWeb

Note: For an initial installation, use the default value of "SPLWeb".

Application Admin User ID

WEB_SPLUSER

This is the default user ID to login to the application through the browser.

Example value: SYSUSER

Note: The required value for an initial installation is "SYSUSER". This value is also used in communication within the XAI application.

This is a security value.

Application Admin Userid Password

WEB_SPLPASS

This is the password of the application admin user.

Example value: sysuser00

Note: The required value for an initial installation is "sysuser00". This value will be saved in encrypted format

This is a Security Value.

Expanded Directories

WEB_ISEXPANDED

When the value is "true" the web application will be deployed in exploded directory format (no WAR files).

When the value is "false", the web application will be deployed in ear file format.

Valid values:

true: Environment expanded (no WAR files)

false: Environment with WAR/EAR files

Default value: false

Application Viewer Module

WEB_ISAPPVIEWER

When the value is "true" the application viewer will be deployed to the web server. When the value is "false", the application viewer will not be deployed to the web Server.

Note: With either value the application viewer module will still be managed by the upgrade process.

Note: When this value is set to false from the initial install menu you will not be able to change this value to true to re-enable the application viewer.

Valid values:

true: The application viewer module will be deployed to the web server

false: The application viewer module will not be deployed to the web server

Default value: true

WebSphere ND Web Application Server Configuration

The WebSphere ND parameters below and in the worksheet are for a WebSphere ND installation.

3. Web Application Server Configuration

Web Server Host: <machine_name>

Web Server Port Number:

Web Context Root:

WebSphere Server Name:

WebSphere Node Name:

Web Server Application Name:

WebSphere JNDI System User ID:

WebSphere JNDI System Password:

Application Admin User ID:

Application Admin Password:

Expanded Directories:

Application Viewer Module:

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Web Server Host

WEB_WLHOST

The host name on which the web application server resides.

Default value: <machine_name>

Web Server Port Number

WEB_WLPORT

The WC_defaulthost number for your WebSpher ND server. This is the port number that is used as a part of the client URL request to connect to the host.

Example value: 9081

Web Context Root

WEB_CONTEXT_ROOT

A context root name that allows customers to run multiple instances of web application on the same installation of WebSphere ND server.

Default value: ouaf

WebSphere Server Name

WEB_SVRNAME

The WebSphere Application Server to host the CCB application.

Each CCB must be installed in a unique WebSphere Application Server.

Default value: server2

WebSphere Node Name

WEB_NODENAME

The name of the WebSphere Node Name where the WebSphere Application Server is running.

Web Server Application Name

WEB_APP

The name of the web application server.

Default value: SPLWeb

Web Server Application Name

WebSphere JNDI User ID:

WEB_WASUSER

User ID the application utilizes to connect to the EJB component through JNDI. This is the EJB container user ID.

Note: This value must be a valid User in the WebSphere ND console.

WebSphere JNDI System Password:

WEB_WASPASS

The password the application utilizes to connect to the EJB component through JNDI.

Note: This value will be saved in encrypted format.

Application Admin User ID

WEB_SPLUSER

This is the default user ID to login to the application through the browser.

Example value: SYSUSER

Note: This value is also used in communication within the XAI application.

Note: This value must be a valid User in the WebSphere ND console.

This is a security value.

Application Admin Userid Password

WEB_SPLPASS

This is the password of the application admin user.

Example value: sysuser00

Note: This value will be saved in encrypted format

This is a security value.

Expanded Directories

WEB_ISEXPANDED

When the value is "true" the web application will be deployed in exploded directory format (no WAR files).

When the value is "false", the web application will be deployed in ear file format.

Valid values:

true: Environment expanded (no WAR files)

false: Environment with WAR/EAR files

Default value: false

Application Viewer Module

WEB_ISAPPVIEWER

When the value is "true" the application viewer will be deployed to the web server. When the value is "false", the application viewer will not be deployed to the web server.

Note: With either value the application viewer module will still be managed by the upgrade process.

Note: When this value is set to false from the initial install menu you will not be able to change this value to true to re-enable the application viewer.

Valid values:

true: The application viewer module will be deployed to the web server)

false: The application viewer module will not be deployed to the web server)

Default value: true

WebSphere Basic Web Application Server Configuration

The WebSphere parameters below and in the worksheet are for a WebSphere installation.

3. Web Application Server Configuration

Web Server Host: <machine_name>

Web Server Port Number:

Web Context Root:

WebSphere Server Name:

WebSphere Node Name:

Web Server Application Name:

WebSphere JNDI System User ID:

WebSphere JNDI System Password:

Application Admin User ID:

Application Admin Password:

Expanded Directories:

Application Viewer Module:

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Web Server Host

WEB_WLHOST

The host name on which the web application server resides.

Default value: <machine_name>

Web Server Port Number

WEB_WLPORT

The WC_defaulthost number for your WebSphere Basic server. This is the port number that is used as a part of the client URL request to connect to the host.

Example value: 9081

Web Context Root

WEB_CONTEXT_ROOT

A context root name that allows customers to run multiple instances of web application on the same installation of WebSphere server.

Default value: ouaf

WebSphere Server Name

WEB_SVRNAME

The WebSphere Basic Application Server to host the CCB application.

Each CCB must be installed in a unique WebSphere Basic application server.

Default value: server2

WebSphere Node Name

WEB_NODENAME

The name of the WebSphere Basic Node Name where the WebSphere Basic application server is running.

Web Server Application Name

WEB_APP

The name of the web application server.

Default value: SPLWeb

WebSphere JNDI User ID:

WEB_WASUSER

User ID the application utilizes to connect to the EJB component through JNDI. This is the EJB container user ID.

Note: This value must be a valid User in the WebSphere console.

This is a security value.

WebSphere JNDI System Password:

WEB_WASPASS

The password the application utilizes to connect to the EJB component through JNDI.

Note: This value will be saved in encrypted format.

This is a security value.

Application Admin User ID

WEB_SPLUSER

This is the default user ID to login to the application through the browser.

Example value: SYSUSER

Note: This value is also used in communication within the XAI application. Note: This value must be a valid User in the WebSphere console.

This is a security value.

Application Admin Userid Password

WEB_SPLPASS

This is the password of the application admin user.

Example value: sysuser00

Note: This value will be saved in encrypted format

This is a security value.

Expanded Directories

WEB_ISEXPANDED

When the value is "true" the web application will be deployed in exploded directory format (no WAR files).

When the value is "false", the web application will be deployed in ear file format.

Valid values:

true: Environment expanded (no WAR files)

false: Environment with WAR/EAR files

Default value: false

Application Viewer Module

WEB_ISAPPVIEWER

When the value is "true" the application viewer will be deployed to the web server. When the value is "false", the application viewer will not be deployed to the web server.

Note: With either value the application viewer module will still be managed by the upgrade process.

Note: When this value is set to false from the initial install menu you will not be able to change this value to true to re-enable the application viewer.

Valid values:

true: The application viewer module will be deployed to the web server)

false: The application viewer module will not be deployed to the web server)

Default value: true

Database Configuration

4. Database Configuration

Web Application Database User ID:

Web Application Database Password:

MPL Database User ID:

MPL Database Password:

XAI Database User ID:

XAI Database Password:

Batch Database User ID:

Batch Database Password:

Database Name

Database Server:

Database Port:

ONS Server Configuration:

Database Override Connection String:

Oracle Client Character Set NLS_LANG: AMERICAN_AMERICA.AL32UTF8

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Web Application Database User ID

DBUSER

The database user ID that has been configured on the database for the web application server connection.

This is a security value.

Web Application Database Password

DBPASS

The database password that has been configured on the database for the web application connection.

Note: This value will be saved in encrypted format.

This is a security value.

MPL Database User ID

MPL_DBUSER

The database user ID that has been configured on the database for the MPL server connection.

This is a security value.

MPL Database Password

MPL_DBPASS

The database password that has been configured on the database for the MPL server connection.

Note: This value will be saved in encrypted format.

This is a security value.

XAI Database User ID

XAI_DBUSER

The database user ID that has been configured on the database for the XAI server connection.

This is a security value.

XAI Database Password

XAI_DBPASS

The database password that has been configured on the database for the XAI server connection.

Note: This value will be saved in encrypted format.

This is a security value.

Batch Database User ID

BATCH_DBUSER

The database user ID that has been configured on the database for the batch connection.

This is a security value.

Batch Database Password

BATCH_DBPASS

The database password that has been configured on the database for the batch connection.

Note: This value will be saved in encrypted format.

This is a security value.

Database Name

DBNAME

The name of the database instance that the application will be connecting to.

Database Server

DBSERVER

Host name of the server where database resides.

Database Port

DBPORT

Database port number on the database server used for connecting to the database

ONS Server Configuration

ONSCONFIG

ONS Server Configuration is required for Oracle RAC FCF.

See the Server Administration Guide for more information.

This is an optional value.

Database Override Connection String

DB_OVERRIDE_CONNECTION

This connection string can be used to override the database information entered above for RAC installation.

Set this string to override the standard database connection string, as entered above.

See the Server Administration Guide for more information.

This is an optional value.

Oracle Client Character Set NLS_LANG

NLS_LANG

The Oracle Database Character Set.

Select the Language and Territory that are in use in your country.

Default value: AMERICAN_AMERICA.AL32UTF8

General Configuration Options

Note: See the Oracle Utilities Customer Care and Billing Batch Server Administration Guide for additional details on this configuration.

5. General Configuration Options

Batch RMI Port:

Batch Mode: CLUSTERED

Coherence Cluster Name:

Coherence Cluster Address:

Coherence Cluster Port:

Coherence Cluster Mode: dev

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Batch RMI Port

BATCH_RMI_PORT

Unique port used by the Batch RMI.

Batch Mode

BATCH_MODE

Valid values: CLUSTERED or DISTRIBUTED

Default value: CLUSTERED

Note: CLUSTERED is currently the only supported mode for production environments.

Coherence Cluster Name

COHERENCE_CLUSTER_NAME

Unique name for the batch CLUSTER

Note: Value is required when batch mode is CLUSTERED.

Coherence Cluster Address

COHERENCE_CLUSTER_ADDRESS

Unique multicast address.

Note: Value is required when batch mode is CLUSTERED.

Coherence Cluster Port

COHERENCE_CLUSTER_PORT

Unique port for the batch CLUSTER

Note: Value is required when batch mode is CLUSTERED.

Coherence Cluster Mode

COHERENCE_CLUSTER_MODE

Valid values:

dev (Development)

prod (Production)

Default value: dev

Advanced Menu Options

The advanced menu options are not available during installation. These options can be accessed after installation using the following commands:

Unix:

$SPLEBASE/bin/configureEnv.sh -a

Windows

%SPLEBASE%\bin\configureEnv.cmd -a

Advanced Environment Miscellaneous Configuration

50. Advanced Environment Miscellaneous Configuration

Online JVM Batch Server Enabled: false

Online JVM Batch Number of Threads: 5

Online JVM Batch Scheduler Daemon Enabled: false

JMX Enablement System User ID:

JMX Enablement System Password:

RMI Port number for JMX Business:

RMI Port number for JMX Web:

GIS Service Running on the same Web Server: true

GIS Service URL:

GIS WebLogic System User ID:

GIS WebLogic System Password:

Online Display Software Home:

Menu Option

Name Used in Documentation

Usage

Customer Value Install

WebSphere Deployment Manager Host Name

WASND_DMGR_HOST

WebSphere Deployment Manager Host name, this value is used for WebSphere ND, when connecting to the WebSphere Deployment Manager.

Note: This value will only appear for WebSphere ND.

Online JVM Batch Server Enabled

BATCHENABLED

When starting a web application server JVM, this property can be set to "true" to allow the on-line application server to also act as a batch worker in the grid.

Default value: false

Note: This functionality should only be used in low volume environments.

Online JVM Batch Number of Threads

BATCHTHREADS

The maximum number of batch processing threads to be executed within a worker JVM when no explicit Distributed Thread Pool is specified. The "DEFAULT" distributed thread pool is used by the batch-scheduling daemon when it initiates processing on batch jobs (typically added via the online system) where no thread pool is specified).

Default value: 5

Note: This will be only used and activated when BATCHENABLED is set to true.

Online JVM Batch Scheduler Daemon Enabled

BATCHDAEMON

In a distributed batch environment, this property can be set to "true" to allow a worker JVM to host the batch scheduling daemon. The daemon accepts online batch submissions requests and automatically submits the work for them.

Valid values: true, false

Default value: false

Note: This will be only used and activated when BATCHENABLED is set to true.

JMX Enablement System User ID

BSN_JMX_SYSUSER

Example value: user

This value is optional.

JMX Enablement System Password

BSN_JMX_SYSPASS

Example value: admin

Note: This value will be saved in encrypted format.

This value is optional.

RMI Port number for JMX Business

BSN_JMX_RMI_PORT_PERFORMACE

JMX Port for business application server monitoring.

This needs to be set to an available port number on the machine.

This value is optional.

RMI Port number for JMX Web

WEB_JMX_RMI_PORT_PERFORMACE

JMX Port for web application server monitoring

This needs to be an available port number for the environment running on the machine.

This value is optional.

GIS Service Running on the same Web Server

GIS

Geographical information (GEOCODING) - GIS Service running on the same web application server

Valid values: true, false

This value is optional.

GIS Service URL

GIS_URL

This is the URL of the external web server.

Note: This value will be only be used when GIS is set to true.

This value is optional.

GIS WebLogic System User ID

GIS_WLSYSUSER

GIS WebLogic System User ID

Note: This value will be only be used when GIS is set to true.

This value is optional.

GIS WebLogic System Password

GIS_WLSYSPASS

GIS WebLogic System Password.

Note: This value will be only be used when GIS is set to true.

This value is optional.

Online Display Software Home

ONLINE_DISPLAY_HOME

The location of the Online Display Software installation directory.

This value is optional.

Advanced Environment Memory Configuration

51. Advanced Environment Memory Configuration

JVM Child Memory Allocation: 512

JVM Child Additional Options:

Web Application Java Initial Heap Size: 1024

Web Application Java Max Heap Size: 1024

Web Application Java Max Perm Size: 500

Web Application Additional Options:

Ant Min Heap Size: 200

Ant Max Heap Size: 800

Ant Additional Options:

Thread Pool Worker Java Min Heap Size: 512

Thread Pool Worker Java Max Heap Size: 1024

Thread Pool Worker Java Max Perm Size: 768

Thread Pool Worker Additional Options:

Additional Runtime Classpath:

Release Cobol Thread Memory Options: -Dspl.runtime.cobol.remote.releaseThreadMemoryAfterEachCall=...

Menu Option

Name Used in Documentation

Usage

Customer Install Value

JVM Child Memory Allocation

JVMMEMORYARG

Heap size for the JVM Child.

Default value: 512

JVM Child Additional Options

JVM_ADDITIONAL_OPT

Additional JVM options that are passed to the Child JVM.

Note: For WebLogic installation only.

Web Application Java Initial Heap Size

WEB_MEMORY_OPT_MIN

Initial heap size for the application server.

Default value: 1024

Note: For WebLogic installation only.

Web Application Java Max Heap Size

WEB_MEMORY_OPT_MAX

Maximum heap size for the application server.

Default value: 1024

Note: For WebLogic installation only.

Web Application Java Max Perm Size

WEB_MEMORY_OPT_MAXPERMSIZE

Maximum Perm Size for the application server.

Default value: 500 MB (Linux, Solaris)

300 MB (Windows, HP-UX)

Note: For WebLogic installation only.

Web Application Additional Options

WEB_ADDITIONAL_OPT

Additional options that will be passed in to the web application server JVM.

Optional Entry.

Note: For WebLogic installation only.

Ant Min Heap Size

ANT_OPT_MIN

Minimum Heap Size passed to ANT JVM.

Default value: 200

Ant Max Heap Size

ANT_OPT_MAX

Maximum Heap Size passed to ANT JVM.

Default value: 800

Ant Additional Options

ANT_ADDITIONAL_OPT

Additional options that are passed into the ANT JVM.

Thread Pool Worker Java Min Heap Size

BATCH_MEMORY_OPT_MIN

Minimum heap size passed to the Thread Pool Worker.

Default value: 512

Thread Pool Worker Java Max Heap Size

BATCH_MEMORY_OPT_MAX

Maximum heap size passed to the Thread Pool Worker.

Default value: 1024

Thread Pool Worker Java Max Perm Size

BATCH_MEMORY_OPT_MAXPERMSIZE

Maximum perm size passed to the Thread Pool Worker

Default value: 768

Thread Pool Worker Additional Options

BATCH_MEMORY_ADDITIONAL_OPT

Additional Memory Options passed into the Thread Pool Worker. This is an optional free form field.

Additional Runtime Classpath

ADDITIONAL_RUNTIME_CLASSPATH

Additional Classpath Options passed in when starting the WebLogic JVM

Note: For WebLogic installation only.

This is an optional value.

Release Cobol Thread Memory Options

REL_CBL_THREAD_MEM

Allow for child JVMs to be optionally configured to release thread-bound memory when each thread is returned to its thread pool. This will increase the number of memory allocations and memory free calls performed by the Microfocus runtime. It will also lower the amount of C-heap memory consumed by child JVMs.

Valid values: true, false

Default value: false

Advanced Web Application Configuration

52. Advanced Web Application Configuration

WebLogic SSL Port Number:

WebLogic Console Port Number:

WebLogic Additional Stop Arguments:

Strip HTML Comments: false

Authentication Login Page Type: FORM

Web Form Login Page: /loginPage.jsp

Web Form Login Error Page: /formLoginError.jsp

Web Security Role: cisusers

Web Principal Name: cisusers

This is a development environment: false

Preload All Pages on Startup: false

Maximum Age of a Cache Entry for Text: 28800

Maximum Age of a Cache Entry for Images: 28800

JSP Recompile Interval (s): 43200

Menu Option

Name Used in Documentation

Usage

Customer Install Value

WebLogic SSL Port Number:

WEB_WLSSPORT

The port number assigned to WebLogic Secure Sockets connection. This is the port number that is used for Secure Sockets connecting to the WebLogic server.

The Secure Sockets implementation is disabled in the default configuration.

For Production additional actions are required. Do NOT run Production with Demo certificates

Refer to the WLS installation guide - Configuring Identity and Trust

When this value is populated http will be disabled.

Example value: 6501

Note: For WebLogic installation only.

This value is optional.

WebLogic Console Port Number

WLS_ADMIN_PORT

The port number assigned to WebLogic Console connection. This is the port number that is used for Secure Sockets connecting to the WebLogic Console server.

Note: For WebLogic installation only.

This value is optional.

WebLogic Additional Stop Arguments

ADDITIONAL_STOP_WEBLOGIC

WebLogic Additional Stop Arguments

This value is required when running the WebLogic Console Port Number and the Application using SSL.

Example values: -Dweblogic.security.TrustKeyStore=DemoTrust-Dweblogic.security.TrustKeystoreType=CustomTrust

Note: For Production additional actions are required. Do NOT run Production with Demo certificates

Refer to the WLS installation guide - Configuring Identity and Trust

Note: For WebLogic installation only.

This is an optional value.

Strip HTML Comments

STRIP_HTML_COMMENTS

Stripping HTML (and JavaScript) comments will increase the security of the system.

Default value: false

Valid values: true, false

Authentication Login Page Type

WEB_WLAUTHMETHOD

Specifies which authentication mode should be used. To switch off OUAF Login Page enter: BASIC

Valid values: FORM, BASIC

Default value: FORM

Web Form Login Page

WEB_FORM_LOGIN_PAGE

Specify the jsp file used to login into the application.

Default value: /loginPage.jsp

Web Form Login Error Page

WEB_FORM_LOGIN_ERROR_PAGE

Specify the jsp file used when there is an error when logging into the application.

Default value: /formLoginError.jsp

Web Security Role

WEB_PRINCIPAL_NAME

Specify the name of the security role.

Default value: cisusers

Web Principal Name

WEB_PRINCIPAL_NAME

Specify the name of a principal that is defined in the security realm.

Default value: cisusers

This is a development environment

WEB_ISDEVELOPMENT

If the value is "true", the web application may be used for application development, which will trigger certain generation processes. If the value is "false" the environment will be used as a runtime environment.

When you choose "true" (development environment) the startup preload pages will be disabled, and the application security will be less strict. This value also controls the amount of logging information written to the application log files.

Valid values: true, false

Default value: false

Preload All Pages on Startup

WEB_PRELOADALL

This controls if the pages should be pre-loaded during the startup of the application or not.

Valid values: true, false

Default value: false

Maximum Age of a Cache Entry for Text

WEB_MAXAGE

Default value: 28800

Maximum Age of a Cache Entry for Images

WEB_MAXAGEI

Default value: 28800

JSP Recompile Interval (s)

WEB_wlpageCheckSeconds

Default value: 43200

Advanced Web Application Configuration

53. OIM Configuration Settings

SPML SOAP Trace Setting: false

SPML IDM Schema Name: F1-IDMUser

SPML OIM Name Space: http://xmlns.oracle.com/OIM/provisioning

SPML OIM Enclosing Element: sOAPElement

Menu Option

Name Used in Documentation

Usage

Customer Install Value

SPML SOAP Trace Setting

OIM_SPML_SOAP_DEBUG_SETTING

Name of Oracle Identity Manager library for debug.

Default value: false

Valid values: true, false

SPML IDM Schema Name

OIM_SPML_UBER_SCHEMA_NAME

Name of Oracle Identity Manager library for schema.

Defautlt value: F1-IDMUser

SPML OIM Name Space

OIM_SPML_NAME_SPACE

Default Namespace for Oracle Identity Manager integration.

Default value: http://xmlns.oracle.com/OIM/provisioning

SPML OIM Enclosing Element

OIM_SPML_SOAP_ELEMENT

Default top level SOAP Element name for Oracle Identity Manager integration.

Default value: sOAPElement

Keystore Options

54. Keystore options (if keystore options are modified, you must run initialSetup.sh|cmd -k in order to recreate the keystore)

Store Type: JCEKS

Alias: ouaf.system

Alias Key Algorithm: AES

Alias Key Size: 128

HMAC Alias: ouaf.system.hmac

Padding: PKCS5Padding

Mode: CBC

Menu Option

Name Used in Documentation

Usage

Customer Install Value

Store Type

KS_STORETYPE

The keystore type.

By default this is set to JCEKS.

Alias

KS_ALIAS

The alias used to encrypt/decrypt passwords by the Oracle Utilities Application Framework to access the keystore.

By default this is set to ouaf.system.

Alias Key Algorithm

KS_ALIAS_KEYALG

The algorithm to be used by the KS_ALIAS entry in keystore to encrypt the passwords.

By default this is set to AES.

Alias Key Size

KS_ALIAS_KEYSIZE

The strength of the keystore for the KS_ALIAS entry.

By default this is set to 128.

HMAC Alias

KS_HMAC_ALIAS

The HMAC alias used by the Encryption Feature Type of the Oracle Utilities Application Framework.

By default this is set to ouaf.system.hmac.

Padding

KS_PADDING

The key padding algorithm used for keystore.

By default this is set to PKCS5Padding.

Mode

KS_STOREPASS_FILE

The keystore Password file.

Installing the Database

Please review Chapter 1 of this guide and then follow the steps for installing the database as described in the Oracle Utilities Customer Care and Billing Database Administrator’s Guide.

Installing Application Server Prerequisite Software

This chapter describes the software that needs to be installed for each of the supported operating system and application server combinations. The sections for this chapter are:

•

AIX 7.1 Application Server

•

Oracle Linux 5.4, 5.8, or 6.x (Based on Red Hat Linux 5.4, 5.8, or 6.x) Application Server

•

Solaris 10 or Solaris 11 Application Server

•

Windows 2008/2012 Application Server

•

HP-UX 11.31 Application Server

AIX 7.1 Application Server

This section describes the software requirements for operating the application using the AIX application server.

Supported Application Servers

Operating System

Chipsets

Application Server

AIX 7.1 (64-bit) TL1

POWER 64-bit

Oracle WebLogic 11gR1 (10.3.6) 64-bit version

WebSphere 8.5.5 64-bit version

Web/Application Server Tier

AIX 7.1 TL1 Operating System Running on Power5 and Power6 Architecture

UNIX Administrator Userid

The following user groups and accounts have to be created to install and administer the application:

Description

Default Value

Customer Defined Value

CCB Administrator UserID

cissys

CCB User Group

cisusr

Note: It is recommended that you change the default values for security reasons.

Throughout this document the administrator user id is often referred to as the "cissys" user id. You should substitute that with the customer defined user id when not using the default value. After the initial install, the software should always be managed using that user id.

By default, the cissys userid is the only one given access to the installed files.

1.

Create a group called cisusr (user group).

2.

Create a user called cissys. Primary group cisusr. Set the primary shell for the cissys user to Korn Shell.

The shell scripts use the ">" to overwrite shell functionality. Your operating system may be configured to not allow this functionality by default in the users shell.

To avoid file access permission problems when executing scripts, consider placing the following command into cissys profile script:

set +o noclobber

Security Configuration

Various options exists to secure a system. In this application all files will be created with the minimum permissions required to ensure that group-readable, group-writable and group-executable files will have the correct user groups and to restrict the permissions available to legitimate users. In this way, a low privileged end user cannot directly edit configuration files and thereby bypass application security controls.

The following users and group categories must be defined to implement this security. For demonstration purposes the following users and groups will be used. These users must be created according to industry standards (including password policies). All users should be created with a default umask of 022 to ensure files created during normal operation have the correct permissions.

Please replace these users and groups for your installation defaults:

User

Group

Description

cissys

cisusr

This user will be used to install the application and to apply patches. This user will own all the application files. The same care should be taken with this user ID as if it is 'root'. This user will be able to add, delete and modify and files within the application.

cisadm

cisusr

Administrative and Operation functions will be available to this user. This user will be able to stop and start the application and batch processes, but will not have access to modify any file other than generated log files

cisoper

-------

Low level operator. This user will only be able to read logs files and collect information for debugging and investigative purposes. Care should be taken in production to disable debugging as debugging information could contain potential sensitive data which this user should not have privy to.

Note: The Oracle Client and WebLogic should be installed as the user who will stop and start the application. For example, if you plan to run the application as the install user these components must belong to cissys.

IBM XL C/C++ Compiler 10.1

Micro Focus COBOL requires that this be installed as a prerequisite to compiling any COBOL code.

If you are going to compile your own COBOL objects then this C compiler should be installed. This C compiler is required for COBOL Compiles only. It needs to be installed on those machines that have both Micro Focus Server Express and will have the COBOL compiles performed on them.

This product is available from IBM.

Oracle 11.2.0.1/12.1.0.1.0 Client

Install the Oracle Client as described in the Oracle Client installation documentation. Use the cissys account to install the Oracle Client. If another user installs the Oracle Client, make sure the cissys user ID has the proper execute permissions.

For the cissys user ID, ensure that the environment variable ORACLE_CLIENT_HOME is set up, and that ORACLE_CLIENT_HOME/perl/bin is the first Perl listed in the cissys account's PATH variable.

Micro Focus Server Express 5.1 WrapPack 7 or WrapPack 8

Server Express is only required for environment where COBOL code will be compiled.

See the "Micro Focus" section in the Quick Install Guide for more information on the installation and licensing of this product.

After installing Server Express, make sure that cissys userid shell has the COBDIR and CUSTCOBDIR environment variables set to point to the base location where Server Express has been installed.

Micro Focus Server 5.1 WrapPack 7 or WrapPack 8

Micro Focus Server is required on the tier that will be hosting the application server where Oracle Utilities Customer Care and Billing application code will be deployed.

Micro Focus Server must be installed in the following directory:

/opt/SPLcobAS51

See the "Micro Focus" section in the Quick Install Guide for more information on the installation and licensing of this product.

IBM Java Software Development Kit version 6.0 Service Release SR10 64-bit

Installation of Java as a prerequisite is only needed if you are using Oracle WebLogic as a Web application server. If you use WebSphere, the Java runtime engine from the Web application server is used.

At the time of release, AIX Java packages could be obtained from:

http://www.ibm.com/developerworks/java/jdk/aix/service.html

The web server requires the 64-bit Java platform in order to function. The main prerequisite for the web server is the version of java mentioned above.

For the Administrator userid (cissys), ensure that the environment variable JAVA_HOME is set up, and that "java" can be found in cissys' PATH variable.

Hibernate 4.1.0

You must install Hibernate 4.1.0 before installing Oracle Utilities Customer Care and Billing.

To install Hibernate:

1.

Create a Hibernate jar external depot:

export HIBERNATE_JAR_DIR=<Hibernate 3rd party jars depot>

2.

Download the hibernate-release-4.1.0.Final.zip file from

http://sourceforge.net/projects/hibernate/files/hibernate4/

Click the "4.1.0.Final" link to download the zip file.

3.

Extract the contents of the archive file:

jar xvf hibernate-release-4.1.0.Final.zip

Note: You must have Java JDK installed on the machine to use the jar command. Be sure to install the JDK that is supported for your platform.

4.

Copy the jar files to your Hibernate jar directory ($HIBERNATE_JAR_DIR) using the following commands:

cp hibernate-release-4.1.0.Final/lib/optional/ ehcache/ehcache-core-2.4.3.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/optional/ ehcache/hibernate-ehcache-4.1.0.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-commons-annotations-4.0.1.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-core-4.1.0.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-jpa-2.0-api-1.0.1.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ javassist-3.15.0-GA.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ jboss-logging-3.1.0.CR2.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ jboss-transaction-api_1.1_spec-1.0.0.Final.jar $HIBERNATE_JAR_DIR

Oracle WebLogic Server 11gR1 (10.3.6) 64-bit

Oracle WebLogic software can be downloaded from the Oracle web site. This application server will run as a 64-bit application.

•

Download and install 64-bit Java (as documented above) before installing WebLogic.

•

Download and install WebLogic Server 11gR1 ( 10.3.6).

IBM WebSphere Application Server 8.5 64-bit

WebSphere must be purchased and downloaded from IBM. It must be installed and configured prior to the MDM installation. This Web application server will run as a 64-bit application.

A single WebSphere server represents a single Oracle Utilities Customer Care and Billing environment. You can install multiple environments on a single WebSphere Installation by creating additional WebSphere servers. Refer to Chapter 7 : Configuring WebSphere Application Server for the configuration steps.

Oracle Linux 5.4, 5.8, or 6.x (Based on Red Hat Linux 5.4, 5.8, or 6.x) Application Server

This section describes the software requirements for operating the application using the Oracle Enterprise Linux or Red Hat Linux application server.

Supported Application Servers

Operating System

Chipsets

Application Server

Oracle Linux 5.4, 5.8, 6.x (64-bit)

(based on Red Hat Enterprise Linux 5.4, 5.8, or 6.x (64-bit))

x86_64

Oracle WebLogic 11gR1 ( 10.3.6) 64-bit version

Web/Application Server Tier

Oracle Enterprise Linux 5.4, 5.8, or 6.x, (Based on Red Hat Enterprise Linux 5.4, 5.8, or 6.x) Operating System Running on x86_64 64-bit Architecture

UNIX Administrator Userid

The following user groups and accounts have to be created to install and administer the application:

Description

Default Value

Customer Defined Value

CCB Administrator UserID

cissys

CCB User Group

cisusr

Note: It is recommended that you change the default values for security reasons.

Throughout this document the administrator user id is often referred to as the "cissys" user id. You should substitute that with the customer defined user id when not using the default value. After the initial install, the software should always be managed using that user id.

By default, the cissys userid is the only one given access to the files installed.

1.

Create a group called cisusr (user group)

2.

Create a user called cissys. Primary group cisusr. Set the primary shell for the cissys user to Korn Shell.

The shell scripts use the ">" to overwrite shell functionality. Your operating system may be configured to not allow this functionality by default in the users shell.

To avoid file access permission problems when executing scripts, consider placing the following command into cissys profile script:

set +o noclobber

Security Configuration

Various options exists to secure a system. In this application all files will be created with the minimum permissions required to ensure that group-readable, group-writable and group-executable files will have the correct user groups and to restrict the permissions available to legitimate users. In this way, a low privileged end user cannot directly edit configuration files and thereby bypass application security controls.

The following users and group categories must be defined to implement this security. For demonstration purposes the following users and groups will be used. These users must be created according to industry standards (including password policies). All users should be created with a default umask of 022 to ensure files created during normal operation have the correct permissions.

Please replace these users and groups for your installation defaults:

User

Group

Description

cissys

cisusr

This user will be used to install the application and to apply patches. This user will own all the application files. The same care should be taken with this user ID as if it is 'root'. This user will be able to add, delete and modify and files within the application.

cisadm

cisusr

Administrative and Operation functions will be available to this user. This user will be able to stop and start the application and batch processes, but will not have access to modify any file other than generated log files

cisoper

-------

Low level operator. This user will only be able to read logs files and collect information for debugging and investigative purposes. Care should be taken in production to disable debugging as debugging information could contain potential sensitive data which this user should not have privy to.

Note: The Oracle Client and WebLogic should be installed as the user who will stop and start the application. For example, if you plan to run the application as the install user these components must belong to cissys.

Oracle 11.2.0.1/12.1.0.1.0 Client

Install the Oracle Client as described in the Oracle Client installation documentation. Use the cissys account to install the Oracle Client. If another user installs the Oracle Client, make sure the cissys user ID has the proper execute permissions.

For the cissys user ID, ensure that the environment variable ORACLE_CLIENT_HOME is set up, and that ORACLE_CLIENT_HOME/perl/bin is the first Perl listed in the cissys account's PATH variable.

Micro Focus Server Express 5.1 WrapPack 7 or WrapPack 8

Server Express is only required for environments where COBOL code will be compiled.

See the "Micro Focus" section in the Quick Install Guide for more information on the installation and licensing of this product.

After installing Server Express, make sure that cissys user shell has the COBDIR and CUSTCOBDIR environment variables set to point to the base location where Server Express has been installed.

Micro Focus Server 5.1 WrapPack 7 or WrapPack 8

Micro Focus Server is required on the tier that will be hosting the application server where Oracle Utilities Customer Care and Billing application code will be deployed

Micro Focus Server MUST be installed in the following directory /opt/SPLcobAS51

See the "Micro Focus" section in the Quick Install Guide for more information on the installation and licensing of this product.

Oracle Java Development Kit Version 6.0 Update 20 or Later, 64-Bit

At time of release, Oracle Java packages could be obtained from:

http://www.oracle.com/technetwork/java/archive-139210.html

The Oracle WebLogic Server requires the 64-bit version. The main prerequisite for the web server is the version of java mentioned above.

For the user ID cissys, ensure that the environment variable JAVA_HOME is setup, and that java_home/bin and java_home/lib can be found in cissys' PATH variable.

Oracle JRockit 6.0 R28.2.7 Java Development Kit

JRockit is only required if you are using Oracle WebLogic as an application server and have Exalogic. This version of Java can be downloaded from the Oracle JRockit Downloads page on oracle.com.

When you set the parameters for Third Party Software Configuration during installation, ensure that the Web Java Home Directory points to the JRockit installation. You do not need to create an environment variable for JROCKIT_HOME.

Hibernate 4.1.0

You must install Hibernate 4.1.0 before installing Oracle Utilities Customer Care and Billing.

To install Hibernate:

1.

Create a Hibernate jar external depot:

export HIBERNATE_JAR_DIR=<Hibernate 3rd party jars depot>

2.

Download the hibernate-release-4.1.0.Final.zip file from

http://sourceforge.net/projects/hibernate/files/hibernate4/

Click the "4.1.0.Final" link to download the zip file.

3.

Extract the contents of the archive file:

jar xvf hibernate-release-4.1.0.Final.zip

Note: You must have Java JDK installed on the machine to use the jar command. Be sure to install the JDK that is supported for your platform.

4.

Copy the jar files to your Hibernate jar directory ($HIBERNATE_JAR_DIR) using the following commands:

cp hibernate-release-4.1.0.Final/lib/optional/ ehcache/ehcache-core-2.4.3.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/optional/ ehcache/hibernate-ehcache-4.1.0.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-commons-annotations-4.0.1.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-core-4.1.0.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-jpa-2.0-api-1.0.1.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ javassist-3.15.0-GA.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ jboss-logging-3.1.0.CR2.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ jboss-transaction-api_1.1_spec-1.0.0.Final.jar $HIBERNATE_JAR_DIR

Oracle WebLogic Server 11gR1 (10.3.6) 64-bit

Oracle WebLogic software can be downloaded from the Oracle web site. This application server will run as a 64-bit application.

•

Download and install 64-bit Java (as documented above) before installing WebLogic.

•

Download and install WebLogic Server 11gR1 ( 10.3.6).

Solaris 10 or Solaris 11 Application Server

This section describes the software requirements for operating the application using the Sun Solaris 10 or Solaris 11 application server.

Supported Application Servers

Operating System

Chipsets

Application Server

Solaris 10 or Solaris 11 (64-bit)

SPARC

Oracle WebLogic 11gR1 ( 10.3.6) 64-bit version

Web/Application Server Tier

Solaris 10 or Solaris 11 Operating System Running on SPARC-based 64-bit Architecture

UNIX Administrator Userid

The following user groups and accounts have to be created to install and administer the application:

Description

Default Value

Customer Defined Value

CCB Administrator UserID

cissys

CCB User Group

cisusr

Note: It is recommended that you change the default values for security reasons.

Throughout this document the administrator user id is often referred to as the "cissys" user id. You should substitute that with the customer defined user id when not using the default value. After the initial install, the software should always be managed using that user id.

By default, the cissys userid is the only one given access to the files installed.

1.

Create a group called cisusr (user group)

2.

Create a user called cissys. Primary group cisusr. Set the primary shell for the cissys user to Korn Shell.

The shell scripts use the ">" to overwrite shell functionality. Your operating system may be configured to not allow this functionality by default in the users shell.

To avoid file access permission problems when executing scripts, consider placing the following command into cissys profile script:

set +o noclobber

Security Configuration

Various options exists to secure a system. In this application all files will be created with the minimum permissions required to ensure that group-readable, group-writable and group-executable files will have the correct user groups and to restrict the permissions available to legitimate users. In this way, a low privileged end user cannot directly edit configuration files and thereby bypass application security controls.

The following users and group categories must be defined to implement this security. For demonstration purposes the following users and groups will be used. These users must be created according to industry standards (including password policies). All users should be created with a default umask of 022 to ensure files created during normal operation have the correct permissions.

Please replace these users and groups for your installation defaults:

User

Group

Description

cissys

cisusr

This user will be used to install the application and to apply patches. This user will own all the application files. The same care should be taken with this user ID as if it is 'root'. This user will be able to add, delete and modify and files within the application.

cisadm

cisusr

Administrative and Operation functions will be available to this user. This user will be able to stop and start the application and batch processes, but will not have access to modify any file other than generated log files

cisoper

-------

Low level operator. This user will only be able to read logs files and collect information for debugging and investigative purposes. Care should be taken in production to disable debugging as debugging information could contain potential sensitive data which this user should not have privy to.

Note: The Oracle Client and WebLogic should be installed as the user who will stop and start the application. For example, if you plan to run the application as the install user these components must belong to cissys.

Oracle 11.2.0.1/12.1.0.1.0 Client

Install the Oracle Client as described in the Oracle Client installation documentation. Use the cissys account to install the Oracle Client. If another user installs the Oracle Client, make sure the cissys user ID has the proper execute permissions.

For the cissys user ID, ensure that the environment variable ORACLE_CLIENT_HOME is set up, and that ORACLE_CLIENT_HOME/perl/bin is the first Perl listed in the cissys account's PATH variable.

Micro Focus Server Express 5.1 WrapPack 7 or WrapPack 8

Server Express is only required for environment where COBOL code will be compiled.

See the "Micro Focus" section in the Quick Install Guide for more information on the installation and licensing of this product.

After installing Server Express, make sure that cissys userid shell has the COBDIR and CUSTCOBDIR environment variables set to point to the base location where Server Express has been installed.

Micro Focus Server 5.1 WrapPack 7 or WrapPack 8

Micro Focus Server is required on the tier that will be hosting the application server where Oracle Utilities Customer Care and Billing application code will be deployed.

Micro Focus Server must be installed in the following directory:

/opt/SPLcobAS51

See the "Micro Focus" section in the Quick Install Guide for more information on the installation and licensing of this product.

Oracle Java Development Kit version 6.0 Update 20 or Later, 64-Bit

This software is only required for Oracle WebLogic installations.

At the time of release, the Oracle Java packages used in the test cycle were downloaded from:

http://www.oracle.com/technetwork/java/archive-139210.html

The Oracle WebLogic Server requires the 64-bit version. The main prerequisite for the web server is the version of java mentioned above.

For the user ID cissys, ensure that the environment variable JAVA_HOME is setup, and that java_home/bin and java_home/lib can be found in cissys' PATH variable.

Hibernate 4.1.0

You must install Hibernate 4.1.0 before installing Oracle Utilities Customer Care and Billing.

To install Hibernate:

1.

Create a Hibernate jar external depot:

export HIBERNATE_JAR_DIR=<Hibernate 3rd party jars depot>

2.

Download the hibernate-release-4.1.0.Final.zip file from

http://sourceforge.net/projects/hibernate/files/hibernate4/

Click the "4.1.0.Final" link to download the zip file.

3.

Extract the contents of the archive file:

jar xvf hibernate-release-4.1.0.Final.zip

Note: You must have Java JDK installed on the machine to use the jar command. Be sure to install the JDK that is supported for your platform.

4.

Copy the jar files to your Hibernate jar directory ($HIBERNATE_JAR_DIR) using the following commands:

cp hibernate-release-4.1.0.Final/lib/optional/ ehcache/ehcache-core-2.4.3.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/optional/ ehcache/hibernate-ehcache-4.1.0.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-commons-annotations-4.0.1.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-core-4.1.0.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-jpa-2.0-api-1.0.1.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ javassist-3.15.0-GA.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ jboss-logging-3.1.0.CR2.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ jboss-transaction-api_1.1_spec-1.0.0.Final.jar $HIBERNATE_JAR_DIR

Oracle WebLogic Server 11gR1 (10.3.6) 64-bit

Oracle WebLogic software can be downloaded from the Oracle web site. This application server will run as a 64-bit application.

•

Download and install 64-bit Java (as documented above) before installing WebLogic.

•

Download and install WebLogic Server 11gR1 ( 10.3.6).

Windows 2008/2012 Application Server

This section describes the software requirements for operating the application using the Windows application server.

Supported Application Servers

Operating System

Chipsets

Application Server

Windows Server 2008 R2 (64-bit)

Window Server 2012

x86_64

Oracle WebLogic 11gR1 ( 10.3.6) 64-bit version

Web/Application Server Tier

Oracle Client 11.2.0.2/12.1.0.1.0 — Runtime Option

Install the Oracle Client as described in the Oracle Client installation documentation. Use the cissys account to install the Oracle Client. If another user installs the Oracle Client, make sure the cissys user ID has the proper execute permissions.

For the cissys user ID, ensure that the environment variable ORACLE_CLIENT_HOME is set up, and that ORACLE_CLIENT_HOME/perl/bin is the first Perl listed in the cissys account’s PATH variable.

Micro Focus Net Express 5.1 with WrapPack 7 or WrapPack 8

This is required only for environments where COBOL code will be compiled.

See the "Micro Focus" section in the Quick Install Guide for more information on the installation and licensing of this product. After installing Net Express, ensure that the COBDIR and CUSTCOBDIR environment variables are set to point to the directory where Net Express is installed.

Micro Focus Server 5.1 with WrapPack 7 or WrapPack 8

Required for Oracle Utilities Customer Care and Billing runtime environments.

See the "Micro Focus" section in the Quick Install Guide for more information on the installation and licensing of this product. Also note that WrapPack 7 or WrapPack 8 is installed after Micro Focus Server 5.1 WrapPack 6 is installed.

After installing Micro Focus Server, ensure that the COBDIR and CUSTCOBDIR environment variables are set to point to the directory where the software is installed.

Oracle Java Development Kit version 6.0 Update 20 or Later, 64-Bit

This software is only required for Oracle WebLogic installations.

At the time of release, the Oracle Java packages used in the test cycle were downloaded from:

http://www.oracle.com/technetwork/java/archive-139210.html

The Oracle WebLogic Server requires the 64-bit version. The main prerequisite for the web server is the version of java mentioned above.

For the user ID cissys, ensure that the environment variable JAVA_HOME is setup, and that java_home/bin and java_home/lib can be found in cissys' PATH variable.

Hibernate 4.1.0

You must install Hibernate 4.1.0 before installing Oracle Utilities Customer Care and Billing.

To install Hibernate:

1.

Create a Hibernate jar external depot:

export HIBERNATE_JAR_DIR=<Hibernate 3rd party jars depot>

2.

Download the hibernate-release-4.1.0.Final.zip file from

http://sourceforge.net/projects/hibernate/files/hibernate4/

Click the "4.1.0.Final" link to download the zip file.

3.

Extract the contents of the archive file:

jar xvf hibernate-release-4.1.0.Final.zip

Note: You must have Java JDK installed on the machine to use the jar command. Be sure to install the JDK that is supported for your platform.

4.

Copy the jar files to your Hibernate jar directory ($HIBERNATE_JAR_DIR) using the following commands:

cp hibernate-release-4.1.0.Final/lib/optional/ ehcache/ehcache-core-2.4.3.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/optional/ ehcache/hibernate-ehcache-4.1.0.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-commons-annotations-4.0.1.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-core-4.1.0.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-jpa-2.0-api-1.0.1.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ javassist-3.15.0-GA.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ jboss-logging-3.1.0.CR2.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ jboss-transaction-api_1.1_spec-1.0.0.Final.jar $HIBERNATE_JAR_DIR

Oracle WebLogic Server 11gR1 (10.3.6) 64-bit

Oracle WebLogic software can be downloaded from the Oracle web site. This application server will run as a 64-bit application.

•

Download and install 64-bit Java (as documented above) before installing WebLogic.

•

Download and install WebLogic Server 11gR1 ( 10.3.6).

HP-UX 11.31 Application Server

This section describes the software requirements for operating the application using the HP-UX application server.

Supported Application Servers

Operating System

Chipsets

Application Server

HP-UX ia (64-bit)

ia64

Oracle WebLogic 11gR1 (10.3.6) 64-bit version

Web/Application Server Tier

HP-UX Operating System Running on Itanium 64-bit Architecture

UNIX Administrator User ID

The following user groups and accounts have to be created to install and administer the application:

Description

Default Value

Customer Defined Value

CCB Administrator UserID

cissys

CCB User Group

cisusr

Note: It is recommended that you change the default values for security reasons.

Throughout this document the administrator user id is often referred to as the "cissys" user id. You should substitute that with the customer defined user id when not using the default value. After the initial install, the software should always be managed using that user id.

By default, the cissys userid is the only one given access to the files installed.

1.

Create a group called cisusr (user group)

2.

Create a user called cissys. Primary group cisusr. Set the primary shell for the cissys user to Korn Shell.

The shell scripts use the ">" to overwrite shell functionality. Your operating system may be configured to not allow this functionality by default in the users shell.

To avoid file access permission problems when executing scripts, consider placing the following command into cissys profile script:

set +o noclobber

Security Configuration

Various options exists to secure a system. In this application all files will be created with the minimum permissions required to ensure that group-readable, group-writable and group-executable files will have the correct user groups and to restrict the permissions available to legitimate users. In this way, a low privileged end user cannot directly edit configuration files and thereby bypass application security controls.

The following users and group categories must be defined to implement this security. For demonstration purposes the following users and groups will be used. These users must be created according to industry standards (including password policies). All users should be created with a default umask of 022 to ensure files created during normal operation have the correct permissions.

Please replace these users and groups for your installation defaults:

User

Group

Description

cissys

cisusr

This user will be used to install the application and to apply patches. This user will own all the application files. The same care should be taken with this user ID as if it is 'root'. This user will be able to add, delete and modify and files within the application.

cisadm

cisusr

Administrative and Operation functions will be available to this user. This user will be able to stop and start the application and batch processes, but will not have access to modify any file other than generated log files

cisoper

-------

Low level operator. This user will only be able to read logs files and collect information for debugging and investigative purposes. Care should be taken in production to disable debugging as debugging information could contain potential sensitive data which this user should not have privy to.

Note: The Oracle Client and WebLogic should be installed as the user who will stop and start the application. For example, if you plan to run the application as the install user these components must belong to cissys.

Oracle 11.2.0.1/12.1.0.1.0 Client

Install the Oracle Client as described in the Oracle Client installation documentation. Use the cissys account to install the Oracle Client. If another user installs the Oracle Client, make sure the cissys user ID has the proper execute permissions.

For the cissys user ID, ensure that the environment variable ORACLE_CLIENT_HOME is set up, and that ORACLE_CLIENT_HOME/perl/bin is the first Perl listed in the cissys account's PATH variable.

Micro Focus Server Express 5.1 WrapPack 7 or WrapPack 8

Server Express is only required for environments where COBOL code will be compiled.

See the "Micro Focus" section in the Quick Install Guide for more information on the installation and licensing of this product.

After installing Server Express, make sure that cissys user shell has the COBDIR and CUSTCOBDIR environment variables set to point to the base location where Server Express has been installed.

Micro Focus Server 5.1 WrapPack 7 or WrapPack 8

Micro Focus Server is required on the tier that will be hosting the application server where Oracle Utilities Customer Care and Billing application code will be deployed

Micro Focus Server MUST be installed in the following directory /opt/SPLcobAS51

See the "Micro Focus" section in the Quick Install Guide for more information on the installation and licensing of this product.

Oracle Java Development Kit Version 6.0 Update 20 or Later, 64-Bit

This software is only required for Oracle WebLogic installations. At the time of release, the Java packages used in the test cycle were downloaded from the HP website.

The Oracle WebLogic Server requires the 64-bit version. The main prerequisite for the web server is the version of java mentioned above.

For the user ID cissys, ensure that the environment variable JAVA_HOME is setup, and that java_home/bin and java_home/lib can be found in cissys' PATH variable.

Hibernate 4.1.0

You must install Hibernate 4.1.0 before installing Oracle Utilities Customer Care and Billing.

To install Hibernate:

1.

Create a Hibernate jar external depot:

export HIBERNATE_JAR_DIR=<Hibernate 3rd party jars depot>

2.

Download the hibernate-release-4.1.0.Final.zip file from

http://sourceforge.net/projects/hibernate/files/hibernate4/

Click the "4.1.0.Final" link to download the zip file.

3.

Extract the contents of the archive file:

jar xvf hibernate-release-4.1.0.Final.zip

Note: You must have Java JDK installed on the machine to use the jar command. Be sure to install the JDK that is supported for your platform.

4.

Copy the jar files to your Hibernate jar directory ($HIBERNATE_JAR_DIR) using the following commands:

cp hibernate-release-4.1.0.Final/lib/optional/ ehcache/ehcache-core-2.4.3.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/optional/ ehcache/hibernate-ehcache-4.1.0.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-commons-annotations-4.0.1.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-core-4.1.0.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ hibernate-jpa-2.0-api-1.0.1.Final.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ javassist-3.15.0-GA.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ jboss-logging-3.1.0.CR2.jar $HIBERNATE_JAR_DIR

cp hibernate-release-4.1.0.Final/lib/required/ jboss-transaction-api_1.1_spec-1.0.0.Final.jar $HIBERNATE_JAR_DIR

Oracle WebLogic Server 11gR1 (10.3.6) 64-bit

Oracle WebLogic software can be downloaded from the Oracle web site. This application server will run as a 64-bit application.

•

Download and install 64-bit Java (as documented above) before installing WebLogic.

•

Download and install WebLogic Server 11gR1 ( 10.3.6).

Configuring WebSphere Application Server

Note: This section applies only to installations using WebSphere as an application server.

This section describes tasks that you should complete before you install the Oracle Utilities Application Framework. It also describes configuration tasks you should complete after installing Oracle Utilities Customer Care and Billing. It includes the following:

•

Configuring WebSphere Basic

•

Configuring WebSphere Network Deployment

Configuring WebSphere Basic

Preinstallation Tasks

This section describes tasks that you should complete to configure a WebSphere Basic application server before you install the Oracle Utilities Application Framework.

When working within the WebSphere console make sure to apply and save your changes to the Master Configuration when appropriate.

Setting of WebSphere Security

There are several security configuration options within WebSphere. In a production environment you must use the security implementation appropriate for your security requirements. During the QA cycle we used the User account repository of the Federated repository. The following procedures describe how to apply these security settings.

Note: Refer to the IBM WebSphere Application Server documentation for more details.

1.

Start the WebSphere Administrative Console and log in.

2.

Go to Security, Global security.

•

Check Enable administrative security.

•

Check Enable application security.

•

Select Federated repositories from the Available realm definitions

3.

Click Apply.

Setting WebSphere Application Groups

1.

Start the WebSphere Administrative Console and log in.

2.

Go to Users and Groups - Manage Groups.

Create the group name of cisusers (default group).

3.

Click Create.

Setting WebSphere Application Users

1.

Start the WebSphere Administrative Console and log in.

2.

Go to Users and Groups - Manage Users.

•

Create the user Id of SYSUSER (example user)

•

Add the Group Membership of cisusers (created in the previous step) to the user.

3.

Click Create.

Setting WebSphere JNDI Users

1.

Start the WebSphere Administrative Console and log in.

2.

Go to Users and Groups, Manage Users.

•

Create the user id of JNDI (example user).

3.

Click Create.

Setting WebSphere JNDI Users - CORBA Naming Service Users

1.

Start the WebSphere Administrative Console and log in.

2.

Go to Environment, Naming, CORBA Naming Service Users.

•

Add the user id of JNDI (example user).

•

Highlight all of the Roles (Cos Naming Read, Cos Naming Write, Cos Naming Create, Cos Naming Delete)

3.

Click Apply.

Note: Prior to this step you will need to restart the server1 since when adding CORBA Naming Service Users, the User is not recognized.

4.

Note the values for JNDI User and Password. The Oracle Utilities Application Framework will prompt you for this information during the installation.

Creation of Additional Servers in WebSphere - Sample Script

You must also provide the name of servers during OUAF installation. You can use the following sample script to create additional servers using the wsadmin.sh tool.

Note: There are several other ways to accomplish this task.

1.

Initialize a wsadmin.sh session:

<$WAS_HOME>/bin/wsadmin.sh -host localhost -port <SoapConnectorPort> -conntype SOAP -username <webSphereUserName> -password <webSphereUserPassword>

Note: Substitute $WAS_HOME, webSphereUserName, SoapConnectorPort, webSphereUserPassword, with values that are appropriate for your installation:

For example:

/ouaf/IBM/WebSphere70/AppServer/bin/wsadmin.sh -host

localhost -port

8889 -conntype SOAP

2.

Create the server instance:

<wsadmin> $AdminTask createApplicationServer

<nodeName> {-name <serverName>}

Setting General Server Properties

1.

Connect to the WebSphere administrative console.

2.

Select Servers, Server Types, WebSphere application servers, and then select Application Servers.

3.

Select your server name.

4.

Under the section General Properties.

•

Deselect Parallel start.

•

Deselect Run in development mode.

5.

Click OK.

6.

Click Save to commit the setting.

Enabling SOAP Communication with WebSphere

The OUAF configuration scripts communicate with WebSphere as a SOAP client by using Jython commands to perform environment maintenance (for example, stop, start, deploy, undeploy).

To enable SOAP communication with WebSphere:

1.

In a text editor, open the following file:

$WAS_HOME/profiles/<PROFILE_NAME>/properties/soap.client.props

Edit the property lines as follows:

•

com.ibm.SOAP.requestTimeout=0

•

com.ibm.SOAP.loginUserid=< WebSphere_User_Id >

•

com.ibm.SOAP.loginPassword=< WebSphere_Password >

Note: Refer to IBM WebSphere Application Server documentation for more details.

1.

If you want to encode the password in the soap.client.props file, then run the PropFilePasswordEncoder command from the $WAS_HOME/profiles/<PROFILE_NAME>/bin directory.

This command is specific to IBM WebSphere Application Server. It encodes passwords located in plain-text property files.

2.

Save and close the file.

Creation of Additional Servers in WebSphere - Sample Script

You must also provide the name of servers during the installation. You can use the following sample script to create additional servers using the wsadmin.sh tool.

Note: There are several other ways to accomplish this task.

1.

Initialize a wsadmin.sh session:

<$WAS_HOME>/bin/wsadmin.sh -host localhost -port <SoapConnectorPort> -conntype SOAP -username <webSphereUserName> -password <webSphereUserPassword>

Note: Substitute $WAS_HOME, webSphereUserName, SoapConnectorPort, webSphereUserPassword, with values that are appropriate for your installation:

For example: /ouaf/IBM/WebSphere70/AppServer/bin/wsadmin.sh -host localhost -port 8889 -conntype SOAP

2.

Create the server instance:

wsadmin> $AdminTask createApplicationServer <nodeName> {-name <serverName>}

Obtaining the Bootstrap Port and WC_defaulthost

You must also provide these port numbers during OUAF installation. Obtain the bootstrap port number and the WC_defaulthost by using the WebSphere administrative console.

Note: The WebSphere application server1 must be running to obtain the bootstrap port number and the WC_defaulthost port number.

To view the bootstrap port number and the WC_defaulthost:

1.

Log on to the WebSphere administrative console.

2.

Select Servers, Server Types, WebSphere application servers, <server_name> and then select Ports under Communications.

The bootstrap port is displayed as BOOTSTRAP_ADDRESS.

The WC_defaulthost is displayed as WC_defaulthost.

3.

Note the values for WC_defaulthost and BOOTSTRAP_ADDRESS. The Oracle Utilities Application Framework will prompt you for this information during the installation.

Set Up a Virtual Host for the Server

1.

Select Environment, Virtual Host, default_host, and then select Host Alias.

2.

Click New.

Enter the following:

•

Host Name: *

•

Port: WC_defaulthost Port Number

Obtaining the WebSphere Node Name

You must also provide the node name during the installation. Obtain the node name by using the WebSphere administrative console.

Note: The WebSphere application server must be running to obtain the bootstrap port number.

To obtain the node name:

1.

Connect to the WebSphere administrative console.

2.

Select Servers, Server Types, WebSphere application servers, <server_name>.

Note: Take note of the value for the Node Name.

Installing Oracle Utilities Application Framework as a Non-Root User with IBM WebSphere Installed as Root

Installing Oracle Utilities Application Framework as a non-root user on a WebSphere application server running on AIX requires certain permissions. Prior to the installation, verify that the operating system user account installing the framework has write and execute permissions on the directories in which WebSphere will be installed.

Postinstallation Tasks

This sections describes tasks that you should complete after you have installed Oracle Utilities Customer Care and Billing on a WebSphere application server.

Setting Environment Entries.

1.

Connect to the WebSphere administrative console.

2.

Select Servers, Server Types, WebSphere application servers.

3.

Select the server name.

4.

Go to Server Infrastructure, and then click Java and Process Management.

5.

Select Process Definition.

6.

Go to Environment Entries.

7.

Click New and add the following Environment Entries:

Name: SPLENVIRON

Value: <$SPLENVIRON>

Note: Substitute $SPLENVIRON with appropriate values for your installation.

Name: SPLEBASE

Value: < $SPLEBASE >

Note: Substitute $SPLEBASE with appropriate values for your installation.

Name: LIBPATH

Value: <$SPLEBASE >/runtime

Note: Substitute $SPLEBASE with appropriate values for your installation.

Note: You will need to restart the server_name before you attempt to start the application on the server.

8.

Click OK.

9.

Click Save to commit the setting.

Setting JVM Memory and Arguments

For Oracle Utilities Application Framework, JVM memory settings must be changed for production environments and/or when processing large volume in a nonproduction environment.

Perform the following steps to set the JVM memory size. The WebSphere application server must be running to set the memory size.

To set the JVM memory size:

1.

Connect to the WebSphere administrative console.

2.

Select Servers, Server Types, WebSphere application servers.

3.

Select the server name.

4.

Go to Server Infrastructure, and then click Java and Process Management.

5.

Select Process Definition.

6.

Go to Additional Properties, and then click Java Virtual Machine.

7.

Enter 1024 for Minimum Heap Size.

8.

Enter 1024 for Maximum Heap Size.

9.

Enter -Djava.security.auth.login.config=<$SPLEBASE>/splapp/config/java.login.config for Generic JVM arguments.

Note: Substitute $SPLEBASE with appropriate values for your installation.

You will need to restart the server_Name before you attempt to start the application on the server.

10.

Click OK.

11.

Click Save to commit the setting.

Setting Server Custom Properties.

The following custom properties have been need in the past to enable WebSphere Classloader to load the correct xalan.jar file.

To set the Custom Properties:

1.

Connect to the WebSphere administrative console.

2.

Select Servers, Server Types, WebSphere application servers.

3.

Select the server name.

4.

Go to Server Infrastructure, and then click Java and Process Management.

5.

Select Process Definition.

6.

Go to Additional Properties, and then click Java Virtual Machine.

7.

Go to Additional Properties, and then click Custom Properties.

8.

Click New.

Enter the following information:

•

Name: javax.xml.transform.TransformerFactory

•

Value: org.apache.xalan.processor.TransformerFactoryImpl

9.

Click OK.

10.

Click Save to commit the setting.

Setting the Web Container Custom Properties.

To set the Web Container Custom Properties:

1.

Connect to the WebSphere administrative console.

2.

Select Servers, Server Types, WebSphere application servers.

3.

Select the server name.

4.

Go to Container Settings, and then click Web Container Settings.

5.

Select Web container.

6.

Go to Additional Properties, and then click Custom properties.

7.

Click New.

Enter the following information:

•

Name: com.ibm.ws.webcontainer.invokefilterscompatibility

•

Value: true

8.

Click OK.

9.

Click Save to commit the setting.

Starting and Stopping WebSphere Servers

To start WebSphere on AIX use the $WAS_HOME/profiles/<profile_name>/bin/startServer.sh script. For example, run:

$WAS_HOME/profiles/<profile_name>/bin/startServer.sh <server_name>

To stop WebSphere on AIX, use the $WAS_HOME/profiles/<profile_name>/bin/stopServer.sh script. For example, run:

$WAS_HOME/profiles/<profile_name>/bin/stopServer.sh <server_name

Note: The Oracle Utilities Application Framework script spl.sh does not stop or start the IBM WebSphere servers. It only stops and starts the Oracle Utilities Application Framework-based applications.

Deployment Using Supplied Script

The application deployment script is initialSetup.sh.-d, located in $SPLEBASE/bin (this script deploys both the SPLService.ear and SPLWeb.ear)

Note: Before running the script ensure you have initialized the environment by running splenviron.sh

Deployment via the Admin Console

Follow these steps to deploy the application using the Admin Console:

Deployment Overview

The application needs to be deployed in the following order:

1.

SPLService.ear

2.

SPLWeb.ear

Note: The SPLService.ear must be successfully deployed before deploying SPLWeb.ear

Deploy SPLService.ear

1.

Select the ear file to deploy.

•

Select Applications, Install New Application.

•

Select Remote file system.

•

Browse to the SPLService.ear or enter the full path to the file.

•

The ear files can be found under $SPLEBASE/splapp/applications.

•

Click Next.

2.

Select Option Fast Path - Prompt only when additional information is required. Click Next.

3.

On the Select installation options page ensure that Deploy enterprise beans is checked. Click Next.

4.

Assign the module to the WebSphere server instance.

When deploying an application from the console make sure you select the correct server and click Apply.

5.

Review the summary page. Review the installation options.

6.

Click Finish. The application will then deploy. The deployment process takes about 5 minutes.

7.

Click Save. The save process can take more than 20 minutes.

Deploying SPLWeb.ear

1.

Select the ear file to deploy.

•

Select Applications, Install New Application.

•

Select Remote file system.

•

Browse to the SPLWeb.ear or enter the full path to the file.

•

The ear files can be found under $SPLEBASE/splapp/applications.

•

Click Next.

2.

Select Option Fast Path - Prompt only when additional information is required. Click Next.

3.

Assign the module to the WebSphere server instance.

When deploying an application from the console make sure you select the correct server and click Apply.

4.

Review the summary page. Review the installation options.

5.

Click Finish The application will then deploy. The deployment process takes about 5 minutes.

6.

Click Save. The save process can take about more than 20 minutes.

Configure the Applications

You need to apply these steps to both the SPLWeb and SPLService applications unless specified.

1.

Set the startup order of the applications (this applies only to SPLWeb):

•

Select the SPLWeb application from Applications, Enterprise Applications.

•

Select Startup behavior.

•

Change the startup order to 2.

•

Click OK.

•

Click OK and Save directly to master configuration.

2.

Set the class loading order (for both SPLService.ear and SPLWeb.ear): Select Class loading and update detection.

•

Set Polling interval to 0.

•

Under Class loader order select Classes loaded with application class loader first. Click OK and Save to master configuration.

3.

Set the module starting weight:

•

SPLService only: Set the Starting weight to 1.

•

SPLWeb only: For each module (.war) set the Starting weight to 10000 and change the Class loader order to Classes loaded with application class loader first

4.

Set EJB JNDI names (this applies only to SPLService). Select Enterprise Java Bean Properties and enter the following values:

•

EJB module: SPLServiceBean

•

JNDI name for all interfaces

•

Target Resource JNDI Name: [ Web Context Root ]/servicebean

•

EJB module: TUGBULiteServiceBean

•

JNDI name for all interfaces

•

Target Resource JNDI Name: [ Web Context Root ]/liteservicebean

5.

Click Ok.

Configure Application Security

After using the supplied script to deploy the application to WebSphere you will need to configure each application's security before starting the application.

Using the WebSphere administration console select Applications, Application Types, WebSphere enterprise applications, <Business Server Application Name>, <server name> (for example, SPLService-server2), Security role to user/group mapping.

For role cisusers:

•

Check Select and the click Map Users:

•

Search for SYSUSER and add to the Selected users list.

•

Click OK.

Note: Repeat the process for <Web Server Application Name>-<server name> (for example, SPLWeb-server2).

Restart the WebSphere Server

It is recommended to stop and then restart the WebSphere server.

If the application is deployed in server1 you can use the admin console to stop and start the server. If the application is deployed in another server you will need to use the scripts that are supplied with WebSphere (stopServer.sh, startServer.sh).

Note: WebSphere admin console runs under server1.

Application URL

The Web link to the WebSphere application will be:

http://<hostname>:<WC_default_port>/<context_root>/loginPage.jsp

For example, http://oracle.test:9081/ouaf/loginPage.jsp

Configuring WebSphere Network Deployment

Preinstallation Tasks

This section describes tasks that you should complete to configure a WebSphere ND application server before you install the Oracle Utilities Application Framework.

When working within the WebSphere Network Deployment (WebSphere ND) console make sure to apply and save your changes to the Master Configuration when appropriate.

Setting of WebSphere ND Security

There are several security configuration options within WebSphere ND. In a production environment you must use the security implementation appropriate for your security requirements. During the QA cycle we used the User account repository of the Federated repository. The following procedures describe how to apply these security settings.

Note: Refer to IBM WebSphere ND Application Server documentation for more details.

1.

Start the WebSphere ND DPMGR Administrative Console and log in.

2.

Go to S ecurity, Global security.

•

Check Enable administrative security.

•

Check Enable application security.

•

Select Federated repositories from the Available realm definitions.

3.

Click Apply.

Setting WebSphere ND Application Groups

1.

Start the WebSphere ND Administrative Console and log in.

2.

Go to Users and Groups - Manage Groups.

Create the group name of cisusers (default group).

3.

Click Create.

Setting WebSphere ND Application Users

1.

Start the WebSphere ND Administrative Console and log in.

2.

Go to Users and Groups - Manage Users.

•

Create the user Id of SYSUSER (example user).

•

Add the Group Membership of cisusers (created in the previous step) to the user.

3.

Click Create.

Setting WebSphere ND JNDI Users

1.

Start the WebSphere Administrative Console and log in.

2.

Go to Users and Groups - Manage Users.

Create the user id of JNDI (example user).

3.

Click Create.

Setting WebSphere ND JNDI Users - CORBA Naming Service Users

1.

Start the WebSphere ND Administrative Console and log in.

2.

Go to Environment, Naming - CORBA Naming Service Users.

•

Add the user id of JNDI (example user).

•

Highlight all of the Roles (Cos Naming Read, Cos Naming Write, Cos Naming Create, Cos Naming Delete).

3.

Click Apply.

Note: the values for JNDI User and Password. The Oracle Utilities Application Framework will prompt you for this information during the installation.

Setting General Server Properties.

1.

Connect to the WebSphere ND DPMGR administrative console

2.

Select Servers, Server Types, WebSphere application servers.

3.

Select the your server name.

4.

Under the section General Properties.

•

Deselect Parallel start.

•

Deselect Run in development mode.

5.

Click OK.

6.

Click Save to commit the setting.

Enabling SOAP Communication with WebSphere ND

The OUAF configuration scripts communicates with WebSphere ND Deployment Manager as a SOAP client by using Jython commands to perform environment maintenance (e.g. stop, start, deploy, undeploy).

To enable SOAP communication with WebSphere ND:

1.

In a text editor, open the following file:

$WAS_HOME/profiles/<PROFILE_NAME>/properties/soap.client.props

Edit the property lines as follows:

•

com.ibm.SOAP.requestTimeout=0

•

com.ibm.SOAP.loginUserid=< WebSphere_User_Id >

•

com.ibm.SOAP.loginPassword=< WebSphere_Password >

Note: Refer to IBM WebSphere Application Server documentation for more details,

2.

If you want to encode the password in the soap.client.props file, then run the PropFilePasswordEncoder command from the $WAS_HOME/profiles/<PROFILE_NAME>/bin directory.

This command is specific to IBM WebSphere ND Application Server, and it encodes passwords located in plain-text property files.

3.

Save and close the file.

Creation of Additional Servers in WebSphere ND

You must also provide the server names during the installation.

Note: There are several other ways to accomplish this task.

1.

Select Servers, New Servers.

This will lead you through a list of steps for creating a new server.

2.

Select server type from the drop down list: WebSphere application server. Click N.ext

3.

Select node from the drop down list that has been created for to host the WebSphere server.

Enter the Server name

Note: Both the Node Name and Server Name will be needed for during the OUAF installation process.

4.

Select a server template of default

Click Next

5.

Check the box to Generate Unique Ports. Click Next

6.

Confirm new server. Click Finished

Obtaining the Bootstrap Port and WC_defaulthost

You must also provide these port numbers during OUAF installation. Obtain the bootstrap port number and the WC_defaulthost by using the WebSphere ND administrative console.

Note: The WebSphere ND Deployment Manager server must be running to obtain the bootstrap port number and the WC_defaulthost port number

To view the bootstrap port number and the WC_defaulthost:

1.

Log on to the WebSphere ND administrative console.

2.

Select Servers, Application Servers, <server_name>, and then select Ports under Communication.

The bootstrap port is displayed as BOOTSTRAP_ADDRESS. The WC_defaulthost is displayed as WC_defaulthost.

3.

Note the values for WC_defaulthost and BOOTSTRAP_ADDRESS. The Oracle Utilities Application Framework will prompt you for this information during the installation.

Set up a New Virtual Host for your Server

1.

Select Environment, Virtual Host, default_host, and then select Host Alias.

2.

Click New.

3.

Enter the following:

•

Host Name:

•

Port: WC_defaulthost Port Number

Obtaining the WebSphere ND Node Name

You must also provide the node name during OUAF installation. Obtain the node name by using the WebSphere ND administrative console.

Note: The IBM WebSphere ND application server must be running to obtain the bootstrap port number.

To obtain the node name:

1.

Connect to the WebSphere ND administrative console

2.

In the left pane, click Servers.

3.

Click Application Servers under Servers.

4.

Click the server instance (server_name, default) on the right section.

5.

Click the Runtime tab.

Note: The value for the Node Name.

Note: If the value of State is not started, then restart the server instance.

Installing Oracle Utilities Application Framework as a Non-Root User with IBM WebSphere Installed as Root

Installing Oracle Utilities Application Framework as a non-root user on a IBM WebSphere ND application server running on AIX certain permissions.

Prior to attempting to install Oracle Utilities Application Framework as a non-root user on a IBM WebSphere ND application server running on AIX, verify that the operating system user account installing Oracle Utilities Application Framework has write and execute permissions on the directories in which IBM WebSphere ND will be installed.

Postinstallation Tasks

This sections describes tasks that you should complete after you have installed the Oracle Utilities Application Framework and Oracle Utilities Customer Care and Billing on a WebSphere application server.

Setting Environment Entries.

1.

Connect to the IBM WebSphere ND administrative console.

2.

Select Servers and then select Application Servers.

3.

Select the server name.

4.

Go to Server Infrastructure, and then click Java and Process Management.

5.

Select Process Definition.

6.

Go to Environment Entries.

7.

Click New and add the following Environment Entries:

Add the following entries:

Name: SPLENVIRON

Value: <$SPLENVIRON>

Note: Substitute $SPLENVIRON with appropriate values for your installation.

Name: SPLEBASE

Value: < $SPLEBASE >

Note: Substitute $SPLEBASE with appropriate values for your installation.

Name: LIBPATH

Value: <$SPLEBASE >/runtime

Note: Substitute $SPLEBASE with appropriate values for your installation.

Note: You will need to restart the server_name before you attempt to start the application on the server.

8.

Click OK.

9.

Click Save to commit the setting.

Setting JVM Memory and Arguments

For Oracle Utilities Application Framework, JVM memory settings must be changed for production environments and/or when processing large volume in a nonproduction environment.

Perform the following steps to set the JVM memory size. The IBM WebSphere ND application server must be running to set the memory size.

To set the JVM memory size:

1.

Connect to the IBM WebSphere ND administrative console.

2.

Select Servers, and then select Application Servers.

3.

Select the server name.

4.

Go to Server Infrastructure, and then click Java and Process Management.

5.

Select Process Definition.

6.

Go to Additional Properties, and then click Java Virtual Machine.

7.

Enter 1024 for Minimum Heap Size.

8.

Enter 1024 for Maximum Heap Size.

9.

Enter -Djava.security.auth.login.config=<$SPLEBASE>/splapp/config/java.login.config for Generic JVM arguments.

Note: Substitute $SPLEBASE with appropriate values for your installation.

You will need to restart the server_Name before you attempt to start the application on the server.

10.

Click OK.

11.

Click Save to commit the setting.

Setting Server Custom Properties.

The following custom properties have been need in the past to enable WebSphere ND Classloader to load the correct xalan.jar file.

To set the Custom Properties:

1.

Connect to the WebSphere ND administrative console.

2.

Select Servers, and then select Application Servers.

3.

Select the server name.

4.

Go to Server Infrastructure, and then click Java and Process Management.

5.

Select Process Definition.

6.

Go to Additional Properties, and then click Java Virtual Machine.

7.

Go to Additional Properties, and then click Custom Properties.

8.

Click New.

Enter the following information:

Name: javax.xml.transform.TransformerFactory

Value: org.apache.xalan.processor.TransformerFactoryImpl

9.

Click OK.

10.

Click Save to commit the setting.

Setting Up the Web Container Custom Properties.

To set the Web Container Custom Properties:

1.

Connect to the WebSphere ND administrative console.

2.

Select Servers, and then select Application Servers.

3.

Select the server name.

4.

Go to Container Settings, and then click Web Container Settings.

5.

Select Web container

6.

Go to Additional Properties, and then click Custom properties.

7.

Click New.

Enter the following information:

Name: com.ibm.ws.webcontainer.invokefilterscompatibility

Value: true

8.

Click OK.

9.

Click Save to commit the setting.

Starting and Stopping WebSphere ND servers

You can use the WebSphere ND console to stop and start the servers. You can also use the command line scripts supplied with WebSphere ND.

Note: The Oracle Utilities Application Framework script spl.sh does not stop or start the IBM WebSphere ND servers. It only stops and starts the Oracle Utilities Customer Care and Billing applications.

Deployment Using Supplied Script

The application deployment script is initialSetup.sh.-d, located in $SPLEBASE/bin (this deploys both the SPLService.ear and SPLWeb.ear).

Note: Before running the script ensure you have initialized the environment by running splenviron.sh

Deployment via the Admin Console

Follow these steps to deploy the application using the Admin Console:

Deployment Overview

The application needs to be deployed in the following order:

1.

SPLService.ear

2.

SPLWeb.ear

Note: The SPLService.ear must be successfully deployed before deploying SPLWeb.ear

Deploy SPLService.ear

1.

Select the ear file to deploy.

•

Select Applications, Install New Application.

•

Select Remote file system.

•

Browse to the SPLService.ear or enter the full path to the file.

•

The ear files can be found under $SPLEBASE/splapp/applications.

Click Next.

2.

Select Option Fast Path - Prompt only when additional information is required.

Click Next.

3.

On the Select installation options page

Ensure Deploy enterprise beans is selected.

Click Next.

4.

Assign the module to the IBM WebSphere ND server instance.

When deploying an application from the console make sure you select the correct server and click Apply.

5.

Review the summary page. Review the installation options

6.

Click Finish. The application will then deploy. The deployment process takes about 5 minutes.

7.

Click Save. The save process can take about more than 20 minutes.

Deploying SPLWeb.ear

1.

Select the ear file to deploy.

•

Select Applications, Install New Application.

•

Select Remote file system.

•

Browse to the SPLWeb.ear or enter the full path to the file.

•

The ear files can be found under $SPLEBASE/splapp/applications.

Click Next.

2.

Select Option Fast Path - Prompt only when additional information is required.

Click Next.

3.

Assign the module to the IBM WebSphere ND server instance.

When deploying an application from the console make sure you select the correct server and click Apply.

4.

Review the summary page. Review the installation options

5.

Click Finish. The application will then deploy. The deployment process takes about 5 minutes.

6.

Click Save. The save process can take about more than 20 minutes.

Configure the Applications

You need to apply these steps to both the SPLWeb and SPLService applications unless specified.

1.

Set the startup order of the applications (this applies only to SPLWeb):

•

Select the SPLWeb application from Applications, Enterprise Applications.

•

Select Startup behavior.

•

Change the startup order to 2.

Click OK.

Click OK and Save directly to master configuration.

2.

Set the class loading order (for both SPLService.ear and SPLWeb.ear): Select Class loading and update detection.

•

Set Polling interval to 0.

•

Under Class loader order select Classes loaded with application class loader first. Click OK and Save to master configuration.

3.

Set the module starting weight:

•

SPLService only - set the Starting weight to 1.

•

SPLWeb only - for each module (.war) set the Starting weight to 10000 and change the Class loader order to Classes loaded with application class loader first

4.

Set EJB JNDI names (this applies only to SPLService). Select Enterprise Java Bean Properties and enter the following values:

•

EJB module: SPLServiceBean

•

JNDI name for all interfaces

•

Target Resource JNDI Name: [ Web Context Root ]/servicebean

•

EJB module: TUGBULiteServiceBean

•

JNDI name for all interfaces

•

Target Resource JNDI Name: [ Web Context Root ]/liteservicebean

5.

Click Ok.

Configure Application Security

After using the supplied script to deploy the application to IBM WebSphere ND you will need to configure each application's security before starting the application.

Using the IBM WebSphere ND administration console select Applications, Enterprise Applications, Business-<server name> (for example, SPLService-server2), Security role to user/group mapping.

For role cisusers:

•

Check All Authenticated.

•

Check Select and click Look up users:

•

Search for SYSUSER and add to the Selected users list.

•

Click OK.

Note: Repeat the process for <Web Server Application Name>-<server name>(for example, SPLWeb-server2).

Restart the IBM WebSphere ND Server

It is recommended to stop and then restart the WebSphere ND server.

Application URL

The Web link to the IBM WebSphere ND application will be:

http://<hostname>:<WC_default_port>/<context_root>/loginPage.jsp

For example, http://oracle.test-02:9085/ouaf/loginPage.jsp

Installing the Application Server Component of Oracle Utilities Application Framework

Installing the Oracle Utilities Application Framework ("the framework") is the prerequisite and foundation for installing a framework-based application such as Oracle Utilities Customer Care and Billing. This section describes the process for installing the Oracle Utilities Application Framework, including:

•

Installation Overview

•

Preinstallation Tasks

•

Installing Oracle Utilities Application Framework

Installation Overview

This process replaces any previously delivered and installed version of the Oracle Utilities Application Framework Server. Before you proceed:

1.

Make sure that you have installed all the required third-party software as described in Chapter 7 : Installing Application Server Prerequisite Software .

2.

Complete the database installation (refer to the Oracle Utilities Customer Care and Billing Database Administrator’s Guide))

The installation packages for your Oracle Utilities Application Framework-based application must be downloaded from the Oracle Software Delivery Cloud. A new installation or an upgrade to an existing Oracle Utilities Application Framework-based application environment can be performed for this version.

If you plan to upgrade a previously installed application server, note that the installation process replaces the previously installed version of the Oracle Utilities Application Framework Server. Before you proceed with the upgrade of an existing installation, make a backup of the application environment's folders and files

Before you proceed with the installation process:

1.

Make sure that you have installed all the required third-party software as described in Chapter 7 : Installing Application Server Prerequisite Software .

2.

Complete the database installation/upgrade process. Refer to the Oracle Utilities Customer Care and Billing Database Administrator's Guide.

Once the Oracle Utilities Application Framework installation is successfully completed and the framework application environment is created, Oracle Utilities Customer Care and Billing can be installed on top of the framework environment.

You can download the installation packages from the Oracle Software Delivery Cloud.

This section describes how to install a working Oracle Utilities Application Framework Server, which can then be further configured manually to allow for production performance levels.

Application server installation packages delivered for this version are multi-platform and are ready to install on any supported platform (as described in the section Supported Platforms ). We recommend that you complete the database installation before installing the application server.

Preinstallation Tasks

Hardware and Software Version Prerequisites

The section Supported Platforms contains all of the available platforms that are required with this release of the product.

Database Installation

Verify that the database has been installed and is operational. See Oracle Utilities Customer Care and Billing Database Administrator’s Guide for more information.

Installation Prerequisites

Chapter 7 : Installing Application Server Prerequisite Software describes all preparations that need to be done on the server prior to installing the application server. Please read carefully the server setup requirements and make sure that all prerequisite software is installed and that all required environment variables are set. Correct server setup and proper environment variable settings are an essential prerequisite for successful environment installation.

System Architecture Overview

Oracle Utilities Application Framework V4.2.0 is a decoupled system architecture involving a business service application tier and a web application tier. Typically both will run on the same server, but the design does allow each tier to be installed on separate servers.

The design implements a stateless session bean (EJB technology, under Java EE 6), to provide remote access to service invocations. The root web app and XAI web apps can be configured to access service processing locally (as in previous versions), or to make a remote EJB call to perform the service request. In the latter case, the served containers, effectively, run as very thin servlet wrappers around the remote call.

For all supported application servers except for WebLogic expanded configuration (SDK environment), the deployment is in the form of two Enterprise Archive (ear) Files: SPLService.ear and SPLWeb.ear. Web Archive (war) files are created during the installation process but are not deployed.

Copying and Decompressing Install Media

The Oracle Utilities Application Framework V4.2.0 Service Pack 2 installation file is delivered in jar format for both UNIX and Windows platforms. If you are planning to install multiple Oracle Utilities Application Framework V4.2.0 Service Pack 2 environments operated by different Oracle Utilities administrator user IDs, you must complete each of the following installation steps for each administrator user ID.

To copy and decompress the install media, follow these steps:

1.

Log in to the application server host with the Oracle Utilities Application Framework administrator user ID.

2.

Download the Oracle Utilities Application Framework V4.2.0.2.0 Multiplatform from Oracle

Software Delivery Cloud.

3.

Create a temporary directory such as c:\ouaf\temp or /ouaf/temp. (Referred to below as <TEMPDIR>.)

Note: This directory must be located outside any current or other working Oracle Utilities application environment. All files that are placed in this directory as a part of the installation can be deleted after completing a successful installation.

4.

Copy the file FW-V4.2.0.2.0-MultiPlatform.jar from the delivered package to the <TEMPDIR>. If you are using FTP to transfer this file, remember to use the BINARY option for the FTP transfer.

5.

Decompress the file:

cd <TEMPDIR>

jar -xvf FW-V4.2.0.2.0-MultiPlatform.jar

Note: You will need to have Java JDK installed on the machine used to (un)jar the application server installation package. Please install the JDK that is supported for the install on your platform to be able to use the jar command. This is the location of Java packages: http://www.oracle.com/technetwork/ java/archive-139210.html

A sub-directory named "FW.V4.2.0.2.0" is created. It contains the installation software for the Oracle Utilities framework application server.

Set Permissions for the cistab File in UNIX

Every Oracle Utilities Application Framework environment installed on a server must be registered in the /etc/cistab file located on that server. On UNIX servers, generally only the root user ID has write permissions to the /etc directory. Since the installation process is run by the Oracle administrator user ID (cissys), this user ID may not be able to write to /etc/cistab table.

The install utility checks permissions and if it identifies a lack of the necessary permissions, it generates a script in the <TEMPDIR>/FW.V4.2.0.2.0 directory named cistab_<SPLENVIRON>.sh. Run the generated script using the root account before continuing with the installation process. The script initializes the cistab file in /etc directory (if it is the first Oracle Utilities Framework application environment on the server) and registers a new environment.

The generated script also changes the owner of /etc/cistab file to the Oracle Utilities Framework administrator user ID, so that the next time a new environment is created by the same Oracle Utilities Framework administrator user ID, you do not need to run the generated script with the root user ID. Instead the install utility itself proceeds with the registration.

If you are reinstalling an existing environment, only the validation of /etc/cistab entry is done by the install utility, no new registration occurs. The install utility interactively instructs you about every step that needs to occur in each specific case.

If you are planning to upgrade an existing environment it is your responsibility to take a backup prior to the installation process. The installation utility does not create a backup of existing environment.

Installing Oracle Utilities Application Framework

This section outlines the steps for installing the Application Framework.

Brief Description of the Installation Process

1.

Log on as the Oracle Utilities Framework administrator (the default is cissys on UNIX) or as a user with Administrator privileges (on Windows).

2.

Configure your application server and any third-party software required for your platform, as outlined in Chapter 7 : Installing Application Server Prerequisite Software

3.

Change directory to the <TEMPDIR>/FW.V4.2.0.2.0 directory.

4.

Set the following path:

export PATH=/usr/java6_64/bin:$PATH

Note: The above command is only applicable on a Unix platform.

5.

Start the application installation utility by executing the appropriate script:

UNIX: ksh ./install.sh

Windows: install.cmd

6.

Follow the messages and instructions that are produced by the application installation utility. Use the completed worksheets in the section Installation and Configuration Worksheets to assist you.

7.

Installation of Oracle Utilities Framework Application Server is complete if no errors occurred during installation.

Detailed Description of the Installation Process

1.

Log on to the host server as Oracle Utilities Application Framework administrator.

Logon as cissys (on UNIX) or as a user with Administrator privileges (on Windows).

2.

Configure application server and third-party software.

Complete all steps outlined in Installing Application Server Prerequisite Software You will need to obtain specific information for the install.

3.

Change directory to the <TEMPDIR>/FW.V4.2.0.2.0 directory and start the application installation utility by executing the appropriate script:

UNIX: ksh ./install.sh

Windows: install.cmd

4.

On the Environment Installation Options menu, select item 1: Third Party Software Configuration.

Use the completed Third Party Software Configuration worksheet in Installation and Configuration Worksheets to complete this step.

5.

Select menu item 50: Environment Installation Options.

Use the completed Environment Installation Options Worksheet to complete this step. See Installation and Configuration Worksheets .

Note: You must create the directory for output (the Log Mount Point). The installation process fails if this directory does not exist.

•

Specify the environment name and the environment directory names for a new installation on a menu screen.

•

Specify the type of the database your environment will be connected to (the default will be Oracle).

•

Specify the web application server your environment will run with (the default will be WebLogic).

•

Enter P to accept the selected options.

•

During this step, the specification of a new environment is checked for validity against /etc/cistab and the permissions on mount points and directories.

•

Below are the mandatory lists of configurable items along with descriptions for a few items.

6.

Configure environment parameters.

•

During this step you will configure environment parameters such as web server hosts and ports, database name, and user ID.

•

The application installation utility shows default values for some configuration options.

•

Use the completed Environment Configuration Worksheet to assist you.

•

Note: Every option requires a value for a successful install. It is important to provide all values.

•

When you are done with the parameters setup, proceed with the option P.

•

All of the options will be written in the following File: $ SPLEBASE/etc/ENVIRON.INI.

•

You will be warned if you did not edit a section. You may proceed if you want to keep the default settings.

•

The application installation utility copies the installation media to a new environment.

•

The installation utility copies the new version software from the temporary installation media directory to the new environment.

•

If any manual or electronic interruption occurs during this step, you can rerun the install utility from the beginning and follow the interactive instructions. The application installation utility is able to recover from such a failure.

•

The application installation utility generates environment configuration parameters:

•

The application installation utility automatically executes the script initialSetup.sh (on UNIX) or initialSetup.cmd (on Windows), located in $SPLEBASE/bin (%SPLEBASE%\bin on Windows) directory. This script populates different application template configuration files with the new environment variables values and completes the rest of the installation steps.

7.

Set up environment variables.

Once the ENVIRON.INI file is created and contains the correct environment parameters, the application installation utility starts a sub shell to the current process by executing the splenviron.sh (on UNIX) or splenviron.cmd (on Windows) script, located in $SPLEBASE/bin (or %SPLEBSE%\etc for Windows) directory. This script sets up all the necessary environment variables and shell settings for the application server to function correctly.

From this point, a number of environment variables have been set up. Some key ones are:

•

$PATH - an adjustment to $PATH is made so that all of the environment scripts and objects will be in the path.

•

$SPLEBASE (%SPLEBASE%) - stands for <SPLDIR>/<SPLENVIRON> directory

•

$SPLOUTPUT (%SPLOUTPUT%) - stands for <SPLDIROUT>/<SPLENVIRON> directory

Note: Make sure that this directory exists. Otherwise the installation script will fail.

•

$SPLENVIRON (%SPLENVIRON%) - environment name

For future operations or any post installation steps, you need to first execute the following command to connect your session to the new environment:

UNIX: $SPLEBASE/bin/splenviron.sh -e $SPLENVIRON

Windows :%SPLEBASE%\bin\splenviron.cmd -e %SPLENVIRON%

You need to execute this script each time you want to be connected to the specific environment before performing manual operations such as shutdown, startup or performing an additional application product installation.

When you have finished the install process, your current online session will be connected to the new environment.

See the Planning the Installation for settings and configuration.

Installing the Application Server Component of Oracle Utilities Customer Care and Billing

This section describes the procedure for installing Oracle Utilities Customer Care and Billing on top of the previously created Oracle Utilities Application Framework environment. This section includes:

•

Preinstallation Tasks

•

Installing the Application

•

Installing User Documentation

•

Integrating Customer Modifications into the Upgraded Environment

•

Operating the Application

•

Installing Service Packs and Patches

You can download the installation package from the Oracle Software Delivery Cloud. If the Framework installation was processed on previously existing Oracle Utilities Customer Care and Billing environment, then customer modifications relevant for this version and compliant with the proper naming conventions (as described in the Oracle Utilities Customer Care and Billing Database Administrator’s Guide) have been preserved in the new environment by the Framework installation process.

To proceed with the Oracle Utilities Customer Care and Billing installation you need to be connected to the target framework application environment. See the detailed installation instructions in the following section.

You must initialize the Framework environment along with the required Patch Set prior to proceeding with Oracle Utilities Customer Care and Billing Application product installation. For detailed instructions see Preparing for the Installation .

Preinstallation Tasks

This section describes the steps that should be taken before installing Oracle Utilities Customer Care and Billing.

Installing Prerequisite Patches

Oracle Utilities Application Framework patches must be installed prior to installing Oracle Utilities Customer Care and Billing.

The patches are available as a convenience rollup inside the zip file, CCB-V2.4.0.2.0-FW-PREREQ-MultiPlatform.zip, which is part of the downloaded Media Pack.

Please refer to the instructions contained in the readme.txt file inside the rollup directory for the steps to install the patches. For a list of the patches that are included in this rollup, refer to Appendix A : Application Framework Prerequisite Patches .

Copying and Decompressing Install Media

The installation file is delivered in jar format for both UNIX and Windows platforms.

Oracle Utilities Customer Care and Billing is delivered in a separate installation package for each supported Operating System. Please refer to the Supported Platforms for version and installation details regarding the database and operating system versions. Also see Chapter 7 : Installing Application Server Prerequisite Software for prerequisite third-party software installation instructions.

Download the installation package for your operating system and proceed with the following instructions.

1.

Log in to the host server as the Oracle Utilities Application Framework administrator user ID (default cissys). This is the same user ID that was used to install the Oracle Utilities Application Framework.

2.

Create a <TEMPDIR> directory on the host server, which is independent of any current or other working Oracle Utilities Customer Care and Billing application environment. This can be the same <TEMPDIR> used during the installation of the Oracle Utilities Application Framework.

3.

Copy the file CCB-V24020-<Platform>.jar in the delivered package to a <TEMPDIR> on your UNIX box. If you are using FTP to transfer this file, remember to use the BINARY option for the FTP transfer.

4.

Decompress the file:

cd <TEMPDIR>

jar -xvf CCB-V24020-<Platform>.jar

Note: You will need to have Java JDK installed on the machine used to (un)jar the application server installation package. Please install the JDK that is supported for the install on your platform to be able to use the jar command. This is the location of Java packages: http://java.sun.com/products/archive/index.html

For Windows installs, include the location of the JDK in your path before you execute the jar command.

For both Unix and Windows platforms, a sub-directory named CCB.V2.4.0 is created. The contents of the installation directory are identical for both platforms. The directory contains the install software for the application product.

Preparing for the Installation

1.

Log on as Oracle Utilities Customer Care and Billing Administrator (default cissys).

2.

Initialize the Framework environment that you want to install the product into.

UNIX:

$SPLEBASE/bin/splenviron.sh -e $SPLENVIRON

Windows:

$SPLEBASE\bin\splenviron.cmd -e %SPLENVIRON%

3.

Stop the environment if running.

UNIX:

$SPLEBASE/bin/spl.sh stop

Windows:

%SPLEBASE%\bin\spl.cmd stop

Installing the Application

1.

Change to the <TEMPDIR>/CCB.V2.4.0.2.0 Directory.

2.

Set the following path:

export PATH=/usr/java6_64/bin:$PATH

Note: The above command is only applicable on a Unix platform.

3.

Execute the script:

UNIX:

ksh ./install.sh

Windows:

install.cmd

Note: On UNIX, ensure that you have the proper execute permission on install.sh

4.

Follow the messages and instructions that are produced by the install utility. Please note that some of the steps (such Generate Application Viewer Items) will take some time to complete.

5.

If the install utility execution was not stopped due to errors and you did not interrupt the execution, you have finished the installation of the Oracle Utilities Customer Care and Billing Application product.

6.

Execute the following commands:

Unix:

splenviron.sh -e <ENV_NAME>

configureEnv.sh

Type P and <ENTER> (you don't need to change anything)

splenviron.sh -e <ENV_NAME>

initialSetup.sh

Windows:

splenviron.cmd -e <ENV_NAME>

configureEnv.cmd -e <ENV_NAME>

Type P and <ENTER> (you don't need to change anything)

splenviron.cmd -e <ENV_NAME>

initialSetup.cmd

Notes.

•

For WebSphere environment installations: at the end of the installation process you will be prompted whether to deploy the application into WebSphere server. If you reply Y the installation script will deploy the application into WebSphere using wsadmin tool. If you reply N you may deploy the application into WebSphere manually using WebSphere admin console, or by executing the genwasdeploy utility.

7.

Start up the environment.

The final step of the installation process is the environment startup. The install utility executes the command spl.sh start (for UNIX) or spl.cmd start (for Windows) to start up the environment. You may start the environment by this command any time. Follow the messages on the screen and check the logs in $SPLSYSTEMLOGS (%SPLSYSTEMLOGS% on Windows) directory to ensure that the environment was started successfully. If the startup failed, identify the problem by reviewing the logs, and start up the environment manually while you are connected to the new environment in your online session.

Note:

•

For WebSphere environment installations: because the WebShere server usually runs under root user id, it needs to be restarted with the new environment variable settings after Oracle Utilities Customer Care and Billing environment installation and deployment into WebSphere. To do this switch to root user id, setup $WAS_HOME environment variable (and the rest of environment variables as described in Chapter 7 : Installing Application Server Prerequisite Software ), initialize the newly installed environment by executing the command: $SPLEBASE/bin/splenviron.sh -e $SPLENVIRON and after that shutdown and startup WebSphere server using WebSphere commands, e.g. $WAS_HOME/bin/startServer.sh server1. After the initial server restart you may start the application by the environment startup/shutdown commands or through WebSphere Admin console.

Installing User Documentation

This section provides instructions for installing the Oracle Utilities Customer Care and Billing user documentation that is supplied with the system. Oracle Utilities Customer Care and Billing user documentation in printable format is provided as Word documents. CCB V2.4. 0 User Documentation is available as a separate download within the Oracle Utilities Customer Care and Billing Media Pack on the Oracle Software Delivery Cloud.

The documentation is also provided in HTML format located inside the Oracle Utilities Customer Care and Billing application server installation package. It is automatically installed and can be launched from the user interface. The files are under the applications directory packaged in the file named help.war. User documentation is provided in English (ENG). The documentation material is divided into the following subdirectories underneath the language directory:

- C1: Oracle Utilities Customer Care and Billing Administration and Business Process Guides

- F1: Oracle Utilities Application Framework Administration and Business Process Guides

Installing Stand-Alone Online Help

You can also use the Oracle Utilities Customer Care and Billing online help in stand-alone mode (that is, you do not have to launch it from the Oracle Utilities Customer Care and Billing application or access it on the application server).

To install the Oracle Utilities Customer Care and Billing help for stand-alone operation, copy the help.war from the Oracle Utilities Customer Care and Billing server (environment) or from the Oracle Utilities Customer Care and Billing installation package to the server or machine on which you want to access the help. If you want to copy the file from any installed Oracle Utilities Customer Care and Billing environment, you can locate the file in the $SPLEBASE/splapp/applications directory on the server.

Unzip the help.war file to any directory on your machine. To launch the Oracle Utilities Customer Care and Billing help in stand-alone mode, open the SPLHelp.html file (located inside the language directory that you wish to use).

Note. Do not change the subdirectory names. The documents use relative path names to link to other documents. Changing the subdirectory names will result in broken links.

Customizing Help for Stand-Alone Operation

You can customize the SPLHelp.html file to open to the file and topic that you most frequently use. To do so, edit the SPLHelp.html file and change the DEFAULT_BOOKMARK to the desired location. The default DEFAULT_BOOKMARK is 'helpHome.html'.

Installing Stand-Alone Help Under Web Server

You can also install Oracle Utilities Customer Care and Billing online help as a stand-alone web application. Use any Web Application server like WebLogic or WebSphere. Configure the configuration file for your web application server to use web application help.

For example,

•

For WebLogic, configure config.xml file for deployed application Name="help"with URI="help.war" and set WebServer DefaultWebApp="help"

•

For WebSphere, configure application.xml with module id="WebModule_help" and <web-uri>help.war</web-uri>

Access the documentation from the browser by the following URL : http://<host name>:<port name>/SPL/<Lang>/SPLHelp.html, where <hostname>:<portname> is the URL of the web server, <Lang> is the name of the language directory, for example, ENG.

Note: Stand-alone online help files are not automatically updated when changes are made to the help files on the application server. You will have to re-install the stand-alone online help files.

Integrating Customer Modifications into the Upgraded Environment

If you are upgrading or installing into an existing environment that had customer modifications, the install utility will have backed up all your customer modifications in a temporary installation area and copied them back into the environment at the end of the upgrade process. The Oracle Utilities Customer Care and Billing Database Administrator’s Guide describes the rules supported by the installation utility to preserve customer modifications. It also discusses the naming conventions for implementing custom modules.

The configuration files of the existing environment are backed up in the directory $SPLEBASE/etc on UNIX and %SPLEBASE%\etc on Windows during installation by the install scripts to preserve any customer changes. Since technologically the framework of this version differs significantly from all previous versions, all configuration files are regenerated from the new templates by the installation process and any previous customer modifications to these configuration files will need to be reapplied manually where applicable, using the backed up files as a reference.

The upgraded version of Oracle Utilities Customer Care and Billing base product may require significant changes to integrate into the new version. Please refer to the Oracle Utilities Customer Care and Billing Software Development Kit product documentation for instructions how to do that.

In case no code changes are required to be applied to the upgraded environment, it is necessary to rebuild the CM Java sources. In order to run this build, follow these steps:

1.

Execute applyCM from corresponding Oracle Utilities Customer Care and Billing Software Development Kit version on the upgraded environment with option "-b" (full build) option. For more details, see the document 02Cookbook.doc within Oracle Utilities Customer Care and Billing Software Development Kit documentation:

UNIX:

cd $SPLEBASE

<SDK bin folder>/applyCM.sh -b

Windows:

cd %SPLEBASE%

<SDK bin folder>\applyCM.cmd -b

Operating the Application

At this point your installation and custom integration process is complete.

Be sure to read the Oracle Utilities Customer Care and Billing Server Administration Guide for more information on further configuring and operating the Oracle Utilities Customer Care and Billing system.

Installing Service Packs and Patches

Periodically, Oracle Utilities releases a service pack of single fixes for its products. A service pack is an update to an existing release that includes solutions to known problems and other product enhancements. A service pack is not a replacement for an installation, but a pack consisting of a collection of changes and additions for it. The service pack may include changes to be applied to the application server, the database, or both. The service pack includes all files necessary for installing the collection of changes, including installation instructions.

Between services packs, Oracle Utilities releases patches to fix individual bugs. For information on installing patches, see knowledge base article ID 974985.1 on My Oracle Support.

Service packs and patches can be downloaded from My Oracle Support (https://support.oracle.com/).

Installing Version 2.4.0 Service Pack 2

This section provides instructions for installing Oracle Utilities Customer Care and Billing 2.4.0 Service Pack 2. This section includes:

•

Prerequisites

•

Upgrading the Database

•

Upgrading the Application

For fixes included in this service pack, see Appendix A : Application Framework Prerequisite Patches .

For known issues in this service pack, see the Release Notes included with this service pack.

Prerequisites

There are no prerequisites.

Upgrading the Database

For instructions on upgrading the database component, please refer to the Oracle Utilities Customer Care and Billing Database Administrator's Guide. This guide is included in the Oracle Utilities Customer Care and Billing V2.4.0.2.0.zip file delivered with the package.

Upgrading the Application

Note: This upgrade process is only applicable if the existing product version is 2.4.0 or 2.4.0 Service Pack 1.

For all other supported upgrade paths, please follow instructions listed in Chapter 9 and Chapter 10 of this document.

To upgrade to this service pack, you must install the following components in the order mentioned below:

•

Oracle Utilities Application Framework v4.2.0.2

•

Oracle Utilities Customer Care and Billing v2.4.0.2.0 Single Fix Prerequisites

•

Oracle Utilities Customer Care and Billing v2.4.0 Service Pack 2

This section includes information on the following:

•

Upgrading to Oracle Utilities Application Framework v4.2.0.2

•

Applying Oracle Utilities Customer Care and Billing v2.4.0.2.0 Single Fix Prerequisite

•

Upgrading Oracle Utilities Customer Care and Billing

•

Post-Upgrade Steps

•

Operating the Application

Upgrading to Oracle Utilities Application Framework v4.2.0.2

Ensure that the database component is successfully installed before proceeding with the steps below:

1.

Create a <TEMPDIR> directory on the host server that is independent of any current or other working application environment.

2.

Copy the delivered package zip file to <TEMPDIR> and unzip it. For example, the Linux copy for Framework V4.2.0.2 is "FW-V4.2.0.2.0-Multiplatform.zip".

Note: If you are using FTP to transfer this file, remember to use the BINARY option for the FTP transfer.

3.

Log in to the application server host server as the administrator user ID (default cissys).

4.

Change directory:

cd <install_dir>/bin

where <install_dir> is the location where the Oracle Utilities Customer Care and Billing application component is installed.

5.

Initialize the Oracle Utilities Customer Care and Billing environment by running the appropriate command:

UNIX:

./splenviron.sh -e <ENV NAME>

Windows:

splenviron.cmd -e <ENV NAME>

6.

If the environment is running, stop it by running the appropriate command:

UNIX:

./spl.sh stop

Windows:

spl.cmd stop

7.

Ensure that you have executed splenviron.sh -e <$SPLENVIRON> prior to the installation process.

Note: The installation utility DOES NOT create backup of installed files. You must backup <$SPLEBASE> before continuing with the rest of the installation utility.

8.

Change directory to the <TEMPDIR>/FW-V4.2.0.2.0 directory and run the below script.

UNIX:

./installSP.sh

Windows:

installSP.cmd

9.

The installation utility informs that the Service Pack (v4.2.0.2) is about to be installed into the environment <$SPLENVIRON>.

10.

The utility prompts you to press Enter to continue with the rest of the installation process of Oracle Utilities Application Framework v4.2.0.0 Service Pack 2 (v4.2.0.2).

Applying Oracle Utilities Customer Care and Billing v2.4.0.2.0 Single Fix Prerequisite

Note: The Oracle Utilities Application Framework V4.2.0.2.0 Application Server must be installed prior to installing this Single Fix Prerequisite.

You must install the corresponding database component of this Single Fix Prerequisite. See the Oracle Utilities Customer Care and Billing Database Administrators Guide section "Installing Prerequisite Database Single Fixes" for instructions.

To install the Oracle Utilities Customer Care and Billing v2.4.0.2.0 Single Fix Prerequisite:

1.

Unzip the CCB-V2.4.0.2.0-FW-PREREQ-MultiPlatform.zip file to a temporary location <temp location>.

2.

Navigate to the <temp location> and unjar the CCB-V24020-FW-PREREQ-MultiPlatform.jar using the following command:

jar -xvf CCB-V24020-FW-PREREQ-MultiPlatform.jar

3.

Navigate to the <temp location>/FW_V4.2.0.2.0-Rollup folder.

4.

Execute the group installation script:

On Unix / Linux:

chmod a+x installSFgroup.sh

chmod a+x FW*/*.sh

./installSFgroup.sh

On Windows:

installSFgroup.cmd

5.

Check the results of the installation of the roll up using the script provided in the package. This script will scan through each bug fixes log file within their respective bug fix folders and report any errors discovered that it finds in the logs.

On Unix / Linux:

perl SPErrorChecker.plx

On Windows:

perl SPErrorChecker.plx

Upgrading Oracle Utilities Customer Care and Billing

1.

Log in to the application server host server as the administrator user ID (default cissys).

2.

Change directory:

cd <install_dir>/bin

where <install_dir> is the location where the Oracle Utilities Application Framework application component is installed.

3.

Initialize the Oracle Utilities Application Framework environment by running the appropriate command:

UNIX:

./splenviron.sh -e <ENV NAME>

Windows:

splenviron.cmd -e <ENV NAME>

4.

If the environment is running, stop it by running the appropriate command:

UNIX:

./spl.sh stop

Windows:

spl.cmd stop

5.

Go to the <TEMP>/CCB.V2.4.0.2.0 folder

6.

Execute the install script:

Note: On UNIX, ensure that you have the proper execute permission on install.sh.

UNIX:

./install.sh

Windows:

install.cmd

7.

The utility displays a message that you are about to install the product Customer Care and Billing into the environment <$SPLENVIRON> located at <$SPLEBASE>.

Note: Ensure that you have executed splenviron.sh -e <$SPLENVIRON> prior to the installation process.

8.

The installation utility asks you to confirm that you want to proceed with the installation process. Enter Y.

9.

The installation process begins. The utility displays a warning that the product Customer Care and Billing is already installed in the environment. You are asked to confirm whether you want to reinstall the product. Enter Y.

10.

When you are done with the confirmation, proceed with the option P.

This completes the installation of Oracle Utilities Customer Care and Billing v2.4.0 Service Pack 2

Post-Upgrade Steps

1.

Log in to the application server host server as the administrator User ID (default cissys).

2.

Change directory:

cd <install_dir>/bin

where <install_dir> is the location where the Oracle Utilities Application Framework application component is installed.

3.

Initialize the environment by running the appropriate command:

UNIX:

./splenviron.sh -e <ENV NAME>

Windows:

splenviron.cmd -e <ENV NAME>

4.

Navigate to $SPLEBASE/bin.

5.

Perform the post-installation steps as described below:

UNIX:

ksh ./configureEnv.sh

Windows:

configureEnv.cmd

Note: On UNIX, ensure that you have the proper execute permission on configureEnv.sh.

6.

Generate the appviewer by following the steps in Generating the Application Viewer .

7.

Verify and review the log files to ensure that there are no errors during the upgrade process.

Operating the Application

At this point your installation of this service pack is complete. Be sure to read the Oracle Utilities Customer Care and Billing Server Administration Guide for more information on further configuring and operating the system.

Additional Tasks

This section describes tasks that should be completed after installing Oracle Utilities Customer Care and Billing, including:

•

Customizing Configuration Files

•

Integrating Existing Customer Modifications

•

Generating the Application Viewer

•

Building Javadocs Indexes

•

Configuring the Environment for Batch Processing

•

Customizing the Logo

•

WebLogic Production Server Considerations

•

Setting Up an Application Keystore

•

Updating the Hash Column on the User Table

Customizing Configuration Files

You may wish to make customer modifications to various configuration files. To do so, you should locate the configuration file you want to customize and edit it manually.

Configuration files are generated from delivered templates in the Oracle Utilities installation and are populated by values entered by the installation utility during the configuration process. In future upgrades of Oracle Utilities application software versions, some templates may be changed to reflect new software version requirements. In this case, the upgrade process will back up your customized configuration file and will regenerate a configuration file based on a new template. You will need to review the new configuration file and apply your customized changes back if still applicable for the new version.

For configuration files that are located in a web application (for example, web.xml, hibernate.properties), of the web application during installation process, you will not be able to edit the configuration files directly.

You will need to follow the procedure:

•

Locate the configuration file you want to customize in the directory $SPLEBASE/etc/conf.

•

Apply your changes.

•

Update application war file with the latest changes by executing the following command:

Unix:

$SPLEBASE/bin/initialSetup.sh

Windows:

%SPLEBASE%\bin\initialSetup.cmd

Integrating Existing Customer Modifications

If the installation utility executed on a previously existing environment, it will preserve customer modifications according to the rules described in the Oracle Utilities Customer Care and Billing Database Administrator’s Guide. In most cases, additional development or configuration actions need to be taken to adjust and integrate upgraded customer modifications to the new version.

Refer to the Oracle Utilities Customer Care and Billing installation section of this document and to the SDK documentation for more information.

Generating the Application Viewer

You may extend application viewer capabilities within an environment by generating additional items. The additional items that can be generated include algorithm type and related algorithm information, maintenance object information and data dictionary information.

To generate the additional items in the application viewer:

1.

Shut down the environment.

2.

Initialize a command shell:

The scripts that are provided with the system need to be run from a shell prompt on the machine that you installed the application on. Before such scripts can be run the shell must be "initialized" by running the splenviron script provided with the system.

Unix:

You will need to logon to your UNIX box as the Oracle Utilities Administrator (default cissys) and open a shell prompt. In the following example you should replace the variables

$SPLEBASE with the Full directory name that you installed the application into

and

$SPLENVIRON with the name you gave to the environment at installation time.

To initialize the environment enter:

$SPLEBASE/bin/splenviron.sh -e $SPLENVIRON

For example:

/ouaf/TEST_ENVIRON1/bin/splenviron.sh -e TEST_ENVIRON1

Windows:

The command window should be opened on the Windows server that you installed the application on.

In the below example you should replace the following variables:

•

%SPLEBASE% : The Full directory name that you installed the application into

•

%SPLENVIRON%: The name you gave to the environment at installation time.

To initialize the environment type the following in your command prompt:

%SPLEBASE%\bin\splenviron.cmd -e %SPLENVIRON%

For example:

D:\ouaf\TEST_ENVIRON1\bin\splenviron.cmd -e TEST_ENVIRON1

3.

Set MaxHeapMemory for AppViewer Generation

UNIX:

•

configureEnv.sh -g

•

Select menu option 50 and change the value of the parameter "Enable Batch Edit Funtionality" to "true".

•

Run initialSetup.sh

•

Run bedit.sh -e THIN

•

This will prompt if you want to create submitbatch.THIN.properties

•

reply Y

•

set maxheap 1024m

•

Save

•

Exit

WINDOWS:

•

configureEnv.cmd -g

•

Select menu option 50 and change the value of the parameter "Enable Batch Edit Funtionality" to "true".

•

Run initialSetup.cmd

•

Run bedit.cmd -e THIN

•

This will prompt if you want to create submitbatch.THIN.properties

•

reply Y

•

set maxheap 1024m

•

Save

•

Exit

4.

Execute the following script to generate all information.

UNIX:

ksh $SPLEBASE/bin/genappvieweritems.sh

Windows:

%SPLEBASE%\bin\genappvieweritems.cmd

5.

Execute the following script to generate all information.

UNIX:

Ksh ./initialSetup.sh

Windows:

initialSetup.cmd

6.

Restart your application.

Building Javadocs Indexes

The following script rebuilds the Javadocs indexes in the application viewer java module. This is necessary after customer modifications (CM) have been applied to an environment. You need to run this script only if the customer modification includes Java code.)

Windows:

%SPLEBASE%\bin\buildJavadocsIndex.cmd

UNIX:

ksh $SPLEBASE/bin/buildJavadocsIndex.sh

Configuring the Environment for Batch Processing

See the Batch Server Administration Guide for information on configuring the environment for batch processing.

Customizing the Logo

To replace the Oracle Utilities logo on the main menu with another image, put the new image <customer_logo_file>.gif file into the directory $SPLEBASE/etc/conf/root/cm and create a new "External" Navigation Key called CM_logoImage. To do that, run the Oracle Utilities application from the browser with the parameters: http://<hostname>:<port>/cis.jsp?utilities=true&tools=true. From the Admin menu, select Navigation Key. Add the above Navigation Key with its corresponding URL Override path. The syntax for the URL path is:

Windows:

http://<host name>:<port>/<Web Context>/cm/<customer_logo_file>.gif

UNIX:

http://<host name>:<port>/<Web Context>/cm/<customer_logo_file>.gif.

The root directory may be deployed in war file format for runtime environment (SPLApp.war). Use provided utilities to incorporate your cm directory into SPLApp.war file.

WebLogic Production Server Considerations

By default, WebLogic Server is configured with two keystores, to be used for development only. These keystores should not be used in a production environment.

Configuring Identity and Trust

Private keys, digital certificates, and trusted certificate authority certificates establish and verify identity and trust in the WebLogic Server environment. WebLogic Server is configured with a default identity keystore DemoIdentity.jks and a default trust keystore DemoTrust.jks. In addition, WebLogic Server trusts the certificate authorities in the cacerts file in the JDK. This default keystore configuration is appropriate for testing and development purposes. However, these keystores should not be used in a production environment.

To configure identity and trust for a server:

1.

Obtain digital certificates, private keys, and trusted CA certificates from the CertGen utility, Sun Microsystem's keytool utility, or a reputable vendor such as Entrust or Verisign. You can also use the digital certificates, private keys, and trusted CA certificates provided by the WebLogic Server kit. The demonstration digital certificates, private keys, and trusted CA certificates should be used in a development environment only.

2.

Store the private keys, digital certificates, and trusted CA certificates. Private keys and trusted CA certificates are stored in a keystore.

3.

Configure the identity and trust keystores for a WebLogic Server instance on the Configuration: Keystores page.

By default, WebLogic Server is configured with two keystores, to be used for development only.

•

DemoIdentity.jks: Contains a demonstration private key for WebLogic Server. This keystore establishes an identity for WebLogic Server.

•

DemoTrust.jks: Contains a list of certificate authorities trusted by WebLogic Server. This keystore establishes trust for WebLogic Server.

These keystores are located in the WL_HOME\server\lib directory and the JAVA_HOME\jre\lib\security directory. For testing and development purposes, the keystore configuration is complete. Use the steps in this section to configure identity and trust keystores for production use.

Refer to the WebLogic documentation to configure identity and trust keystores for production use (Secure servers and resources > Configure identity and trust/Set up SSL)

Note: Depending on your choice of implementation you may need to change some configuration files. These files are managed by templates and will be overwritten if the procedures documented in "Customizing Configuration Files" are not followed.

Setting Up an Application Keystore

This section describes how to set up a keystore in your system. The keystore is used for functionality such as digital signatures for document numbers, and encryption for credit card security. The digital signatures features is only appropriate for Oracle Utilities Customer Care and Billing customers who use document numbers in generating bill signatures.

For additional information about document numbers, digital signatures, and encryption, see the online help.

For additional information about using the Java keytool utility, see the following section of the Oracle Java SE documentation:

http://docs.oracle.com/javase/7/docs/technotes/tools/solaris/keytool.html

Follow this procedure to set up the keystore in your environment:

1.

Generate the keystore. The following command creates the file ".mykeystore" in directory ${SPLEBASE}:

keytool -genkeypair -alias <keyalias> -keyalg RSA -sigalgSHA256withRSA -keystore ${SPLEBASE}/<filename> -keysize 1024 -storetype JCEKS -dname "CN=<name>, OU=<unit>, O=<organization>, C=<country>" -validity 365

For example:

keytool -genkeypair -alias ouaf.application -keyalg RSA -sigalg SHA256withRSA -keystore ${SPLEBASE}/.mykeystore -keysize 1024 -storetype JCEKS -dname "CN=Mark Jones, OU=TUGBU, O=Oracle, C=US" -validity 365

The utility will prompt you for the keystore and key passwords. Make sure that they are the same.

2.

Configure the following template files by adding the following entries:

For WebLogic Server:

•

To enable in WebLogic, edit the following in ${SPLEBASE}/templates/startWeblogic.sh.template:

JAVA_OPTIONS="$JAVA_OPTIONS -Dcom.oracle.ouaf.keystore.file=$SPLEBASE/<filename>"

JAVA_OPTIONS="$JAVA_OPTIONS -Dcom.oracle.ouaf.keystore.password=<keystore_password>"

For <keystore_password>, use the same password entered in the keytool utility.

•

To enable this in batch, edit the threadpoolworker.properties.template:

com.oracle.ouaf.keystore.file=@force_forward_slash(SPLEBASE)@/.mykeystore

com.oracle.ouaf.keystore.password=<keystore_password>

Note: Because the path needs to be passed with forward slashes even on Windows platforms, the force_forward_slash function will convert any "\" to "/".

For <keystore_password>, use the same password entered in the keytool utility.

For WebSphere Server:

•

Create the password file.

echo ab987c | tr -d '\n'>$SPLEBASE/.passFile

Note: In above command, please replace "ab987c" with your password string.

•

Add Keystore entries to spl.properties templates:

Open each of the five spl.properties templates mentioned below and add the following two lines in each of the templates

com.oracle.ouaf.keystore.file=@SPLEBASE@/.mykeystore

com.oracle.ouaf.keystore.passwordFileName=@force_forward_slash(SPLEBASE)@/.passFile

List of spl.properties templates (located in ${SPLEBASE}/templates/ folder):

•

spl.properties.iws.template

•

spl.properties.template

•

spl.properties.service.template

•

spl.properties.XAIApp.template

•

spl.properties.standalone.template

3.

Re-initialize the environment to propagate these changes by executing the initialSetup.sh/cmd.

4.

Restart the environment.

Updating the Hash Column on the User Table

During initial install of the application server, when running install.sh the installer creates both the Oracle Utilities Application Framework system keys and system HMAC keys. In certain situations it is necessary to run the following to update the hashes (the F1_SECURITY_HASH field) on the User table:

Windows:

set CLASSPATH=%CLASSPATH%;%SPLEBASE%\splapp\standalone\lib\spl-shared-4.2.0.2.0.jar;%SPLEBASE%\splapp\standalone\lib\commons-cli-1.1.jar;%SPLEBASE%\splapp\standalone\lib\log4j-1.2.17.jar;%SPLEBASE%\splapp\standalone\lib\commons-codec-1.6.jar

Unix/Linux:

export CLASSPATH=$CLASSPATH:$SPLEBASE/splapp/standalone/lib/spl-shared-4.2.0.2.0.jar:$SPLEBASE/splapp/standalone/lib/commons-cli-1.1.jar:$SPLEBASE/splapp/standalone/lib/log4j-1.2.17.jar:$SPLEBASE/splapp/standalone/lib/commons-codec-1.6.jar

Then execute the following:

java com.splwg.shared.common.ChangeConfigurationKey -l -h

Please refer to the Oracle Utilities Customer Care and Billing Security Guide for more details.

Application Framework Prerequisite Patches

Oracle Utilities Application Framework patches must be installed prior to installing Oracle Utilities Customer Care and Billing. The patches listed below are available as a convenience rollup, CCB-V2.4.0.2.0-FW-PREREQ-MultiPlatform.zip, which is included in the downloaded Media Pack. Please refer to the instructions contained inside the rollup directory for steps to install the patches. The rollup contains the following patches:

Bug Fix

Description

18495142

COPY OF 17944976 - ANALOG CLOCK FACE APPEARS MULTIPLE TIMES WHEN MODIFYING METER

18473816

COPY OF BUG 18261765 - WARNING IN WEBLOGIC STDOUT - "SHOULD BE MARKED AS AUTOCLO

18337995

BATCHEDIT TEMPLATES MISSING @VARIABLES

18017320

COPY IOF BUG 18017295 - COPY OF BUG 18017268 - COPY OF BUG 18017202 - COPY OF BU

17998487

COPY OF BUG 17998475 - COPY OF BUG 17666677 - COPY OF BUG 17460340 - {INFO}IS IT

17992633

ZONES WITH ASIS ARE BROKEN AFTER FW 4.2.0.2.0

17973498

COPY OF 17968704 - TIMED BATCH JOBS THAT ARE IN PROGRESS WITH PENDING THREAD

17948308

BUNDLE IMPORT HEADING IS GETTING TRIMMED WHILE CREATING NEW BUNDLE

17930543

SUPPORT MULTIPLE OPERATIONS IN IWS

17910758

COPY OF BUG 17901801 - DISPLAY MAP RENDERING USING DISPLAY MAP SERVICE SCRIPT IS

17849576

COPY OF BUG 17318042 - CCB V2.4 POP-UP WINDOWS WITH MORE THAT ONE MONITOR

17843874

INFORMATION LIFE CYCLE MANAGEMENT DATABASE AND APPLICATION CHANGES

17802274

COPY OF 17793307 - REINSTATE PREPAREDSTATEMENT API

17782943

TRYING TO SORT COLUMNS IN SERVICE XSL HANDLER ZONES CAUSES ERROR ON PAGE

17717722

COPY OF BUG 17618354 - F1-BOMOINFO SERVICE PICKS ONLY PARENT BO OPTION TYPES AND

17615392

SPLENVIRON.SH -Q PARAMETER DOESN'T SUPPRESS OUTPUT

17597773

COPY OF BUG 17597770 - COPY OF BUG 17263191 - ETM: EXPORT TO EXCEL INQUIRY ON AU

17597598

COPY OF BUG 17560947 - UI HINTS - MAP GENERATION BASED ON PRE-SCRIPT FAILS TO EX

17591437

COPY OF 17591429 DASHBOARD NOT REFRESHED WHEN CONTEXT SENSITIVE ZONE IS EMPTY

17476261

WARNING MESSAGE FOR UNSAVED DATA IS INCONSISTENT

17368315

MDM: NAVIGATION KEY SEARCH BY TYPE IS NOT TRANSLATED.

17335688

MDM: GLOBALCONTEXT NOT GETTING UPDATED.

17302917

DELAY IN LOADING OF DROPDOWNS IN MAPS GENERATED USING UI HINTS

16988199

FILTER MESSAGE DATE IS NOT SHOWING JAPANESE ERA FORMAT

16796398

IN FIREFOX, F1-ENTERBUSINESSOJBECT UI MAP SELECT HAS A DEFAULT VALUE

16555312

F1-LDAP JNDI PASSWORD IS DISPLAYING INTHE LOG FILES

16535383

ABLE TO ADD INVALID ACCESS MODES TO A USER GROUP/APPLICATION SERVCIE

14041244

IN FIREFOX THE BUTTON IN FILTER UI MAP IS NOT SHOWN AS PER STANDARD

18242229

BUG 17767813 - XAI DYNAMIC UPLOAD SEARCH NOT DISPLAYING DETAILS IN CONTROL CENTR

18220265

COPY OF BUG 18220253 - MWM - ALGORITHM TYPE AND DESCRIPTION DO NOT DISPLAY WHEN

18198530

SF ENVIRONMENTS ARE MISSING FK REF F1-TODO

18186632

COPY OF BUG 18051826 - GETSEVERITY METHOD ALWAYS RETURNS NULL IN CCB V2.4

18164113

CCB CONTROL CENTRAL SEARCH - DO NOT NAVIGATE IF USER NOT AUTHORIZED FOR ACCOUNT

18147812

FK REF HYPERLINK IN UI MAP NOT ABLE TO NAVIGATE USING NAVIGATION OPTION SCRIPT

18141665

FILTER AREA USING INPUT ELEMENT WITH DEFAULTVALUE BUT WITHOUT ID THROWING ERROR

18139433

NULLPOINTEREXCEPTION ERROR WHEN CREATING TO DO ENTRY VIA BS 'F1-ADDTODOENTRY'

18136611

COPY OF BUG 18016233 - PORTAL PERSONALIZATION - SAVING QUERY ZONE PREFERENCES DO

18132851

UI HINT:PROTECT- DATE/TIME AND FKREF PROBLEM ON EDIT

18130703

COPY OF 17583839 - TPW BOOT AS WINDOWS SERVICE

18117209

COPY OF 18098734 - XAI INBOUND SERVICE EXTRACTFAINFO NOT WORKING

18115752

COPY OF BUG 17931048 - ERROR WHEN INVOKING PLUGIN SCRIPT ALGORITHM FROM ALG

18112287

COPY OF 18085864 - RUNNING BATCH JOB F1-STKDF GENERATES SAXPARSER RESET ERROR

18109222

EXTENDABLE LOOKUP - UNABLE TO ADD VALUES

18083939

MASTER CONFIGURATION CHANGES FOR ILM

18078205

COPY OF 18078201 - JAVA THREADS DO NOT CANCEL

18062613

COPY OF 18062597 - CIPZCSTN.DOSQLCLOSE RETURNS ERROR DURING XA000-FINALIZE-SQL-P

18055168

COPY OF BUG 18055152: WEB SERVICE ADAPTER CREATION ERROR

18051717

CCB V24010 - MULTIPLE SYSTEM OVERRIDE DATE WAS ADDED VIA XAI INBOUND SERVICE

18033305

COPY OF BUG 16197111 - OTSS: "TO DO ENTRY" MO SHOULD HAVE FOREIGN KEY REFERENCE

18019745

COPY OF BUG 17831268 - BATCHSCHEDULER IS NOT GETTING STOPPED IN SOLARIS ENV

18017508

COPY OF BUG 17790441 - SEARCH FOR SOME USERS RESULTS IN SERVER ERROR

17998187

COPY OF BUG 17992955 - COPY OF BUG 16537956 - TO DO ENTRY HAS WRONG BATCH RUN NU

17980168

COPY OF 17980142 - MAKE SUBMITBATCH.PROPERTIES.TEMPLATE COMMIT COUNT 10

17971113

COPY OF BUG 17971110 - COPY OF BUG 17971102 - SEND ATTACHMENT THROUGH EMAIL

17952946

ALERT MESSAGE IS DISPLAYING DOUBLE QUOTES AS HTML &QUOT

17950954

CREATE ILM SUBMITTER AND CRAWLER BATCH JOBS

18417428

COPY OF 18417308 - ETM:SEVERAL ISSUES ON DATA GRID SEARCH RESULTS ZONES

18413339

NULLPOINTER EXCEPTION IS THROWN IN SYNCREQUESTUPDATESERVICE

18406240

COPY OF BUG 18078918 - FA RESPONSE TAKES 4 MINUTES TO PROCESS

18394093

JAVASCRIPT FUNCTION UNHIDELISTCOLUMN() IS NOT WORKING AS EXPECTED

18378042

COPY OF 18378035 - ETM:UPON ADDING ENTITY THRU XAI DB FIELDS GET TRUNCATED IF LO

18376516

COPY OF BUG 18315638 - COPY OF BUG 17348026 - AIX: (LOCATION OF ERROR UNKNOWN)DU

18375959

COPY OF 17490361 - VALIDATION ERROR RESOLVED BUT OBJECT STILL IN APPLIED WITH ER

18365321

COPY OF BUG 18365312 - LIST ICON DISPLAYS ON WRONG COLUMN IN QUERY ZONE

18364208

ORG.XML.SAX.SAXNOTRECOGNIZEDEXCEPTION: SECURE-PROCESSING FEATURE

18362779

ILM " RETENTION PERIOD IN DAYS" SHOWING DATA IN WRONG FORMAT

18346736

COPY BUG 18245008 - ER TO CHANGE QUERY FOR TO DO SUMMARY

18335807

COPY OF BUG 18335787 - COPY OF BUG 18173951 - COPY OF BUG 17881075 - COP

18334251

COPY OF BUG 17873194 - ATTACHMENT QUERY PORTAL PROVIDED BY FW RETRIEVES ONLY FW

18300703

GUI SE: TABLE SEARCH BY MO DOES NOT DEFAULT TO MO CODE IN CONTEXT

18291643

COPY OF BUG 18180822 - UNABLE TO BRING UP MWM ENV WITH SSL PORT TURNED ON

18291614

METADATA AND DOC UPDATES

18287159

COPY OF BUG 18125008 IN 2.2 WHEN THERE IS NO DATA THE TAG STILL SHOWED IN XML

18277216

CLIRR: CORRECT API CHANGE IN SERVERMESSAGE

18270274

COPY OF 18270271 - XAI SENDER F1OUTBNDMSG PROCESSES MESSAGES IN WRONG ORDER

18259634

COPY OF 18189984 - FIREFOX BEHAVIOR ON HIDING COLUMNS OF UISUPPORT.JS

18253693

IWS DEPLOY FAILS ON BO WHOSE MAINTENANCE OBJECT IS NOT F1

18253154

NOSUCHFIELDERROR: BATCH_LEVEL_OF_SERVICE_REASON IN 4.2 SP2

18233184

COPY OF BUG 18197798 - CMA FAILS TO EXPORT ENTITIES WITH NULL DURATION VALUES

18233168

COPY BUG OF BUG 17505634 - ETM: 40045C - INFO STRING ON MAINTENANCE MAPS SHOULD

18223615

ZONE SQL IGNORING OPTIONAL PARAMETER

18221507

CHANGE NOTIFICATIONDOWNLOAD_CHANDLER TO SUPPORT SOA PROCESSING METHOD

18204962

COPY BUG 18140377 - THE SYSTEM START UP TIME NEEDS IMPROVEMENT

17517924

HANDLETOUCH METHOD OF JAVAROWPROGRAMHANDLER IS CAUSING DUPLICATE KEY ERROR

18530421

HELPER SCRIPT TO RUN JAVA STANDALONE

18516332

COPY OF BUG 18516324- ALLOW FOR NOT AUTHORIZED ACCESS TO THE SCRIPT MESSAGE OVE

18515432

CONFIGUREENV MENU - CATER FOR CONDITION_JAVA, NEEDED FOR JAVA 1.7

18509871

USER UNABLE TO LOGIN AFTER INITIAL APPLICATION INSTALL

18483566

CLARIFY ALGORITHM AND FIELD FEATURE CONFIGURATION OPTIONS FOR ENCRYPTION

18476044

JS ERROR ENCOUNTERED 'LRUCACHE OBJECT NOT DEFINED' IN CCB 2.4.0 CALC RULE PAGE

18471976

CCB - CRYPTOGRAPHYCOMMAND RETURNS PLAINTEXT PASSWORD WITH INFO LOG TO STD OUTPUT

18466506

GETTING KEYSTORE ISSUE WHILE STARTING MPL

18422248

CCB CONTROL CENTRAL SEARCH - DO NOT NAVIGATE TO NEXT ITEM IF USER NOT AUTHORIZED

18413143

COPY OF BUG 17610713 - ETM: DATABASE IS PERFORMING BAD WITH MORE CONCURRENT USER

18399979

PAGINATION - CRASHING IF PAGING COLUMN IS NOT DISPLAYED

18399934

PAGINATION - NOT WORKING FOR DESCENDING SORT

18386558

PATCHDEPLOY TOOL

18377981

COPY OF 18377975 - OUTBOUND MESSAGE STILL SENT WHEN CLICK CANCEL ON WARNING MESS

18351753

IWS: GETTING NULL POINTER EXCEPTION FOR ANY DELETE OPERATION

18347676

ETM: UPGRADE TO 4.2.0 SP2 CAUSED COMPILATION ERRORS ON MASTERCONFIGURATION_ID

18340470

QUERY ZONE FILTER AREA BACKGROUND COLOR IS LIGHTER THAN NORMAL

18331092

ILM READINESS FOR FW MODS- SERVICETASKS, OUTBOUND MSG, SYNC REQ AND OBJ REV

18330463

SKIP AUDIT EXECUTION IF CHANGE IS RELATED TO ILM SWITCH OR ILM DATE

18288104

NOT MORE THAN 9 DECIMALS ALLOWED IN ZONE

18225471

EXPLORER ZONE - SAVE PREFERENCES NOT RETAINING ADDED / REORDERED COLUMNS

18144536

SIDE ISSUES OF BUG 18083939 - MASTER CONFIGURATION CHANGES FOR ILM

18049320

AUTOTRANSITION AN INDIVIDUAL SYNC REQUEST

14031557

KEYSALLOCATIONBATCHPROCESS & RECORDSLOADBATCHPROCESS

Customer Care and Billing Fixes

This section lists bugs fixed in Oracle Utilities Customer Care and Billing version 2.4.0, including:

•

Bugs Fixed in Version 2.4.0 Service Pack 2

•

Bugs Fixed in Version 2.4.0 Service Pack 1

•

Bugs Fixed in Version 2.4.0.0

Bugs Fixed in Version 2.4.0 Service Pack 2

Bug Fix

Description

6093533

SR# CPER-174# RELAX RESTRICTION ON ADDRESS SOURCE ON START/STOP AND ORDER PAGES

9661233

PAYMENT TENDER SEARCH DOES NOT SUPPORT SEARCH BY CHARACTERISTICS.

15993348

CHANGE BATCH PROGRAMS TO USE THREAD ITERATOR STRATEGY

16048019

C1-OWNED FIELDS SIZE IS SMALL AND RESTRICTION IN USE

16456561

87046 - CCB-MDM: COMPARE RATES ENHANCEMENTS

16475341

{INFO} CCB 2.4.0, BILL PRINT IN BATCH FOR BI PUBLISHER IS NOT YET SUPPORTED

16486538

MAKE DEFAULTING OF ADD ACCOUNT AND START SERVICE SWITCH CONFIGURABLE

16499860

CONVERT CHAR TYPE CUSTOM SEARCH TO DROPDOWN ON MAINTENANCE UI

16832261

F1-SAVEPOINTDISPATCHER RETURNS NULL MESSAGE PARAMETER VALUES

16871134

GO TO APPOINTMENT FROM CCB-FA CONTEXT MENU NAVIGATES TO CCB APPOINTMENT PORTAL

16942759

COMPLETE OPEN TO DOS FOR A BILL WHEN BILL COMPLETED

17049792

COPY OF 17025416 - PAYMENT TRANSFER CHAR DUPLICATE ISSUE FORM BASED PAYMENT

17088751

11766 - SOM - FIELD ACTIVITY REMARKS

17188898

MODIFY DOCUMAKER CONFIG TO SUPPORT BOTH OLD AND XML BILL EXTRACTS

17329344

SHOW ALL CUSTOMERS IN CONTROL CENTRAL SEARCH REGARDLESS OF ACCESS GROUP

17336363

11769 - SOM - FA COMPLETION AND APPOINTMENT HANDLING OF NON-CCB FA

17349785

CREATE SUMMARY LINE ONLY IF STEPPED CALC RULE RESULTS IN MORE THAN ONE STEP.

17450263

MISPLACED PARAGRAPH IN CIPZNAMN.CBL

17511657

11765 - ITEMS SUPPORT

17531372

10751 - RELATED LEADS ZONE INCORRECT ORDER BY

17550213

ADD OPTION TO ALWAYS CANCEL / REBILL ESTIMATED BILLS AFTER ACTUAL READ

17556303

MOD 11748-SUPPORT ENCRYPTED ID NUMBER SEARCH IN QUERY DATA EXPLORER

17568255

ERROR WHEN CREATING A NEW FA (WFM-SEQ FIELD IS MISSING)

17584792

COPY OF 17006803 - PAYMENT EVENT UPLOAD DOESN'T CATER FOR MULTIPLE PKS IN RULE V

17613438

EDITING DATA ON NON CIS PAYMENT

17621631

CI_BILL_CHAR CLASSIFIED AS UNCLASSIFIED, SHOULD BE TRANSACTION TABLE

17636236

COPY OF 17616247 - UNABLE TO VIEW ALERTS

17641844

11697 - SOM - ADDITIONAL FR ITEMS

17663802

11753 - ILM TRACKING BUG

17761006

COPY OF 17747165 - XAI SERVICE WOULD NOT BE MIGRATED TO PROD ENVIRONMENT WITH TR

17761793

COPY OF 12538597 - SHOULD WAM SERVICE REQUEST COMMENTS BE MAPPED TO CCB FIELD AC

17768151

COPY OF 17750967 - SAME TYPE FA CREATION PROBLEM

17769358

COPY OF 17763270 - NOT ABLE TO BILL ACCOUNT WITH SUB SAS THROUGH BATCH BILLING

17778230

COPY OF 17777505 - DUPLICATE 'STATUS CONDITION' OPTIONS FOR SYNC REQUEST BO

17778278

COPY OF 17432743 - "TOO MANY OPEN CURSORS IN THE REGISTRY" ERROR FOR BATCH CIPPS

17778313

COPY OF 17318094 - NO ALERT THAT "APPOINTMENT REQUIRED FOR DISPATCH"

17778328

COPY OF 17631203 - BATCH TD-FACT COMPLETED WITH ERRORS CIPZCTJN - SEQ_NUM FIELD

17778353

COPY OF 17627168 - INCORRECT ELIGIBILITY TO PACKAGE IF CAMPAIGN HAS FILE LOCATIO

17782819

COPY OF 17655250 - INCORRECT SERVICE PROVIDER DISPLAYING ON ACCOUNT CONTROL CENT

17784233

USABILITY IMPROVEMENTS - CALC RULE AND CALC GROUP

17784257

USABILITY IMPROVEMENTS - RATE SCHEDULE TREE

17790958

PERSON PORTAL - SELF-SERVICE ZONE SHOULD DISPLAY ONLY NOTIFICATIONS

17793518

SERVICE POINT ITEM HIST SEARCH INSTALL DATE COLUMN IS SHOWING WRONG

17797948

COPY OF 17709480 - LONG TIME FOR SA SCREEN TO POPULATE (INTERVAL METERED CUSTOME

17798097

COPY OF 17657799 - C1FIELDACTIVITYMAINTENANCE XAI INBOUND SERVICE

17814602

CHANGE SYSTEM KEY INHERITANCE TO 3 CHARACTERS FOR ALL TABLES

17820364

A/P REQUEST TYPE ALLOWS A NULL A/P REQUEST TYPE TO BE ENTERED AND SAVED.

17821169

ACCOUNT MANAGMENT GROUP ALLOWS ADDITIION OF A RECORD WITHOUT A DESCRIPTION

17823699

PERSON CHARACTERISTIC FUTURE DATED DO NOT DISPLAY IN CUSTOMER INFORMATION ZONE

17837456

COPY OF 17789505 - METER READ: NO WARNING FOR DUPLICATE FA WHEN CLICKING REREAD

17842207

COPY OF 17842246 - APPLICATION NOT PROPERLY RELEASING THE SOCKETS

17842223

COPY OF 17740730 - BILL COMPL ALGORITHMS SHOULD NOT BE TRIGGERED IF BILL SEGMENT

17842232

COPY OF 17762114 - CLASS CAST EXCEPTION BETWEEN INSTALLATION AND ADJ TYPE ADJ IN

17844751

COPY OF 17736089 - AVOID CREATING TODO IN C1-PEPL2 - ENHANCE DUP CHECK

17844785

COPY OF 17793255 - DATA DIFFERENCE IS NOT CREATED FOR INITIATIVE CRITERIA

17844790

COPY OF 17799887 - 11747 - SET COMPARE METHOD OF TABLES WITH CLOB FIELD TO LARGE

17844811

COPY OF 17809975 - TO DO TYPE CHARACTERISTIC TYPES HAVE SAME DESCRIPTION

17861069

COPY OF 17855303 - OFFCYCLE BILL GENERATOR ERROR EVEN THOUGH SA IS NOT BILL DETE

17861109

11771 - CSS-CCB: SERVICE CHARGES-TO-DATE

17861165

SOM-INCORRECT DISPLAY OF DEVICE CONFIG OVERVIEW IN CCB

17866262

COPY OF 17863556 - BILLABLE CHARGE - CALCULATED RATE COMPONENT ISSUE - PRODUCT S

17883946

ACCOUNT AUTOPAY IS NOT BEING CANCELLED WHEN CANCELLATION IS DONE THRU CSS

17905427

WRONG LABEL FONT ON TENDER CANCEL MAP

17918054

V2 RATE ENGINE - EXTENDING FIELD LENGTH OF STEP HIGH AND LOW VALUES

17931126

COPY OF 17867695 - XSD FOR POSTROUT BATCH GENERATED XML

17944522

COPY OF 17867681 - MULTIPLE TO DO ENTRIES CREATED BY TD-MODTL BATCH

17946175

COPY OF 17866288 - CONTROL CENTRAL PORTALS/ZONES HAVE NO DATA WHEN COMING FROM P

17946823

PAY PLAN SEARCH RESULTS ORDER

17951175

FORMULA SCALAR VARIABLES DESIGNATED AS VN SAVED IN LOWER CASE CAUSE ERROR

17983132

MESSAGE DOES NOT MENTION ITEM

18025658

COPY OF 18025304 - SA ARREARS SNAPSHOT (EXTSAARS) EXTRACT FAILED TO LOAD INTO DW

18029753

CREATE NDS RECORDS WITH SOA PROCESSING METHOD

18038794

COPY OF 18012909 - TURNING OFF MODULES IN FEATURE CONFIGURATION AFFECTS ESSENTIA

18050247

COPY OF 17911664 - AUTO PAY DOES NOT WORK PROPERLY WITH PAY PLANS

18051129

COPY OF 18051124 - DUPLICATE KEY ERROR ON FA UPLOAD STAGING

18054823

WHEN FA IS CREATED IN CCB THE EXTERNAL ID DOES NOT POPULATE FOR 5-15 MINUTES

18056341

COPY OF 17422745 - TAX EXEMPTION ON FINAL BILLS NOT APPLIED WHEN PROCESSING DAT

18056358

COPY OF 17809047 - WHEN CREATING A DEVICE TEST SELECTION, ERROR "TOO MANY OPEN C

18056369

COPY OF 17929123 - C1FACOMPLETIONEXTSYSSTRUCT (CIPOFCEP) XAI INBOUND SERVICE BUG

18063081

REFERENTIAL INTEGRITY ERROR MESSAGE IS MISSING FOR TOS CANCEL REASON

18063279

BI PUB 11.1.1.7.131017 / CCB 2.4.0 SP1 RU DEC 2013 - REPORT LOGO NOT SHOWING UP

18071902

CHANGE ELEMENT NAME IN INBOUND FA COMPLETION

18085701

COPY OF 17861620 - REMOVE CODE ENABLING CTI-IVR ICON ON NON-FUSION TOOLBAR

18140085

COPY OF 17907462 - PREMISE TREE TAB ON CONTROL CENTRAL TRUNCATES AT MID-SCREEN

18147616

COPY OF 18083687 - 100% TAX EXEMPT AMT CALCULATED AS EITHER 0.01 OR -0.01 DEPEND

18155396

GLASSIGN REPORTS MORE RECORDS PROCESSED THAN ARE

18162568

COPY OF 18161186 - WHEN ADDING NEGATIVE PAYMENT VIA PAY EVENT QUICK ADD PRINT DI

18162821

COPY OF 18152768 - MIGRATION DATA SET IMPORT WITH METERREADSCHEDULE OBJECT CANNO

18177493

COPY OF 18140294 - CREDIT &COLLECTION: ADM2 BATCH ERROR FOR COLLECTION CLASS CON

18184773

BILL FACTOR DETAILS NOT SHOWING UNDER SA RATE TREE FOR V2 RATES

18191495

COPY OF 17959468 - CCB 2.4.0.1 - CONTROL CENTRAL SEARCH FOR PERSON ID TYPE SHOWS

18201326

DEFAULTTABLEAUDITOR FAILS FOR DFLT_HIGH_BILL_AMT COLUMN OF CI_SA_TYPE TABLE

18241781

COPY OF 18188959 - FIELD ACTIVITY IS CREATED WITHOUT ERROR ON SP TYPE WHICH IS N

18244791

COPY OF 17799132 - BSEG CALC HEADER START DT ISSUE WITH BILLING DETERMINANTS AND

18244801

COPY OF 17811769 - UNABLE TO DELETE A NON REQUIRED CHARACTERISTIC ON A CONTRACT

18244821

COPY OF 17980180 - REBILLING BILL SEGMENTS IN CCB-MDM INTG ENV FAILS AFTER APPLY

18244835

COPY OF 18084104 - CONFIGLAB COMPARE JOB ASSIGNS ALPHA-NUMERIC VALUE TO ROOT_OBJ

18244862

COPY OF 18162412 - (CCB-MDM) BILL SEGMENT SQ DETAILS SHOWING INCORRECT VALUE

18244903

COPY OF 17884893 - BATCH BILLING NOT WORKING - POSSIBLE ENDLESS LOOP DETECTED IN

18244928

COPY OF 18042501 - CANNOT UPLOAD PAYMENT TENDER AND DEPOSIT CONTROL THROUGH STAG

18244938

COPY OF 18054935 - R144 - SEVERANCE PROCESS CREATED FOR RECONNECT WHEN PAY PLAN

18244946

COPY OF 18058774 - SET UOM DECIMAL TO 0, SMALL METER READ NUMBER WILL BE MISSED

18247907

MAINTENANCE OBJECT METER READ IS NOT CERTIFIED FOR ACTION ADD

18262246

COPY OF 18242561 - "LOW/HIGH VALUES OF STEPS MUST NOT OVERLAP" ERROR IN STEPPED

18264384

NULLPOINTEREXCEPTION ERROR WHEN CREATING TO DO ENTRY VIA BS 'F1-ADDTODOENTRY'

18278002

11753 - ILM ARCHIVE SWITCH NULL FIELD INVALID

18278332

11769 - PREMISE ACTIVITY OVERVIEW DISPLAYING ERROR CONSTRAINT

18284830

11753 - ILM CHANGES FOR USAGE AND MR MOS

18284833

COPY OF 18085922 - CCB PRODUCE ERROR WHILE BILLING CUSTOMER WITH METER READING L

18286339

COPY OF 18284285 - FIELD ACTIVITY COMPLETION IS NOT UPDATING METER LOCATION CODE

18301602

11769 PREMISE ACTIVITY OVERVIEW SHOULD BE HIDDEN IF SOM WAS NOT SETUP

18302001

COPY OF 17924815 - SYSTEM ERROR IS DISPLAYED WHEN TRYING TO COMPLETE A PENDING O

18303070

11766 - INCORRECT DISPLAY OF FA REMARK DESCRIPTION IN SERVICE TASK MAINTENANCE

18304859

11766-SYSTEM ERROR IN FA REMARK SERVICE TASK LOG

18307855

11753 - ILM MO'S CASE/BILL CHG IMPLEMENTED WITH RET PERIOD OPTION TYPE

18311358

RELATED PERSONS OF AN ACCOUNT MUST BE RETRIEVED IN WXINVITEPERSONLIST SERVICE

18317336

REVERT COLUMN BACK TO ADJUSTMENT TO ADJUSTMENT ID

18324406

11753 ILM - ILM DATE FIELD IS "NULL" FOR ADDED NEW USAGE RECORD

18334437

SYNC REQUEST SEARCH BY BADGE NUMBER IS NOT WORKING

18353885

11753 ILM - MO OPTIONS FOR FA INCLUDE A PREDEFINED ILM RETENTION PERIOD BASE VAL

18355327

11753 - BILLABLE CHARGE READ DETAIL UI PAGE MISSING METER CONFIG ID AFTER ARCHIV

18355497

11766 - FA REMARK ACTIVACTION CREATE TO DO ALGORITHM - ADD SERVICE TASK MO LOG

18355669

11766 - ADD HANDLING FOR FA REMARK CODES FROM SOM THAT ARE MORE THAN 12 CHARS

18355975

COPY OF 17029706 - CONFIGLAB PROCESS DOES NOT PRODUCE LOG WITH NON-ASCII CHARACT

18361378

11753 - ILM - ADD ENTITY ID FOR METER READ,BILLABLE CHARGE INFO ROUTINES.

18361519

COPY OF 18359316 - IMPROVE PERFORMANCE OF SEARCH PAGES USING ENCRYPTED FIELDS

18362945

11753 ILM - BILLABLE CHARGE SHOULD BE ALSO ARCHIVED FROM BILL ELIGIBILITY ALG

18365502

11766-FA REMARK SERVICE TASK LOG ADDED A MESSAGE EVEN IF THERE'S NO UPDATE DONE

18368322

11753 ILM - CAN NOT ADD NEW STATEMENT RECORD DUE TO ILM SWITCH ERROR

18370239

REMOVE SP ID FROM FIELDACTIVITYSTEPSPAGE

18373181

UPGRADE CCB FORTIFY TO V4.0

18376197

GETTING NULLPOINTEREXCEPTION WHILE STARTING IBM AIX WAS8.5.5 ENVIRONMENT

18376724

ADD FIELD TO INDEX XT265S4 ON CI_PAY_TNDR

18377913

MODIFY ALGORITHM C1-FA-PDTSY (FACHECKFORDATASYNCHREQUESTALGCOMP)

18378105

11753 ILM - FIELD MISSING ERROR ENCOUNTERED WHEN DELETING A STATEMENT

18378181

11753 ILM - CREATE A NEW SERVICE TO UPDATE THE ILM FIELDS

18384090

COPY OF 18379320 - SERVICE ROUTE ALTERNATE SEARCH FAILED ON SP MAIN PAGE

18384224

COPY OF 18253222 - INITIATE STOP SA OVERRIDE SA SP END DATE/TIME AFTER CHANGE HA

18384669

11766 - REMOVE SOM FA REMARK DESC AND MOVE ADDRESS FIELDS IN THE SVC TASK BO

18387325

11765 - BILLING OF SOM BASED SAS WITH MULTIPLE ITEMS THROWS DUPLICATE KEY ERROR

18388040

11765 -WHEN SP HAS NO ITEMS NOR DEVICES IN MDM, SP PORTAL STILL DISPLAYS HEADERS

18392732

11753 ILM - DO NOT ALLOW UPDATES ON A MATCH EVENT WITH ARCHIVE_SW SET TO 'Y'

18393169

COPY OF 18276653 - BILL SEGMENT ERROR - SYSTEM ERROR

18401530

11753 ILM - REMOVE THE SP CONTEXT MENU FROM SEV EVENT FA PAGE IF THERE IS NO SP

18401778

11765 - WHEN BILLING BD SA WITH BADGED ITEM SYSTEM THROWS AN ERROR

18401999

11767 - SOM - CANCEL FA PREVENTION - REMOVE CUSTOM AREA IN REQ

18405465

COPY OF 18386966 - IMPROVEMENT ON RECOMMEND BUDGET (CIPGCBHX)

18405652

SQL ERROR CODE 000004098 OCCURRED IN MODULE CIPCACCR:XQ040 CHANGE

18406719

RATE ENGINE USABILITY - FUNCTIONAL REVIEW

18410278

FIELD PRECISION INCONSISTENCIES IN CICCLPRT-CICCLXDF

18412380

FIELD ACTIVITY CANCELLATION BY ONLINE USER

18413013

DETERMINE BF VALUE REFERENCE DATE - INCLUDE BILL ID

18415258

PK VALUE IS NOT DISPLAYED ON FK VALIDATION DETAILS

18416038

11765 - SP PORTAL IS UNABLE TO DISPLAY MULTI-ITEMS

18420871

SET 5 CCB QA DOES NOT SEND OUT ONLINE BD REQUEST MESSAGE

18421507

11753 - BATCH PGMS NOT PROPERLY SETTING ILM_ARCH_SW TO 'N', BLANK INSTEAD

18421858

11769-CHAR TYPE/VALUE (SERVICE TASK ID) IS BLANK IN CUSTOMER CONTACT

18422985

<CLBDSYNC ERROR>: ERROR OCCURRED IN DECRYPTING... - NO SUCH METHOD "MAIN"

18423241

ILM_DT AND ILM_ARCH_SW WERE NOT COPIED TO PRODUCTION

18429327

COPY OF 18419613 - EMPTY BILLCALCULATIONLINECHARACTERISTICDATA DOES NOT OVERRIDE

18435792

COPY OF 18431965 - BATCH JOB C1-CTIDS HAS BATCH RUN ERRORS

18435921

11753 ILM - MATCH EVENT ELIGIBILITY CHANGES FROM FUNCTIONAL REVIEW

18442748

CALC RULE ZONE DOES NOT DISPLAY WHEN RULE HAS A CHAR WITH BRACKET IN THE DESC

18453823

SCRIPT TO DEPRECATE TABLES ADDED IN 2.4.0.0.0 AND DELETED IN 2.4.0.1.0

18457258 -

<CLBDSYNC ERROR>: COULDN'T CONNECT TO THE DB.ORA-01017: INVALID USERNAME/PW

18470657

COPY OF 18462120 - INVALID START READ DATE/TIME ERRORS IN BASE BILL PRINT EXTRA

18472145

11765-MULTI-ITEM OVERVIEW ZONE DISPLAY EVEN IF NO DETAILS FROM MDM RECEIVED

18477987

REPLACE COMP-5 WITH COMP ON CCB PROGRAMS

18478086

DELETING DUPLICATE LEVEL-88 FIELD INS-ALG-ENTITY-ONBD IN CICTIAE8.CBL

18478116

DOUBLE KEYWORD PERFORM IN CIPMMRDP

18478312

COMPUTE + + IN CIPZRNDG

18478356

INVALID USER EXIT ENTRY IN CIPPPYCL

18479282

MISSING CROSS REFERENCES ON RATES V2

18484710

EXTRA PARAGRAPH IN CIPCCSCP

18485547

EXTRA PARAGRAPH IN CIPTDCER

18485602

LINE LONGER THAN 72 CHARS IN CICBBCCC

18485612

CIPTSTBL - EXTRA TBCTR FIELD IN MOVE STATEMENT

18485635

DUPLICATE PARAGRAPH IN VARIOUS PROGRAMS

18485644

LINE CONTENT EXCEEDS 72 CHARS

18485652

NESTED/ORPHANED USER EXIT IN CIPQCAAN

18489079

WXBUDGETDETAILS SERVICE DOES NOT RETURN VALUE FOR MONTHSFORTRUEUP

18492745

SRCH_CHAR_VAL - CHANGE DEFINITION FROM CHAR TO VARCHAR

18493448

MISSING $#BSES* CHANGE-HISTORY

18493464

PERFORM ENDING IN CIPADVHX

18493475

$#BSES* INSTEAD OF $#BSEE*

18493496

COPYBOOK NAME ENCLODED IN QUOTES IN CIPMSMHP

18493533

MISSING PERIOD AFTER COPY CICZCLSN IN VARIOUS PROGRAMS

18493536

11765 - ITEMS SUPPORT - FR ISSUES

18507521

COPY OF 18467026 - OCBG TO DO NOT UPDATING ACCOUNT CONTEXT ON THE DASHBOARD

18508831

UNABLE TO COPY METER READ IN CL DUE TO INVALID ILM_ARCH_SW

18509454

COPY OF BUG 18199757 - V2 RATE ENGINE EXPOSE HELPER CLASSES - APPLY FLAT CHARGE

18514183

COPY OF 18427565 - PPM BATCH JOB FAILING WITH COMMIT WORK ERROR

18514195

COPY OF 18412076 - BILL INTERCEPT FIELD IS NOT COMING AS PART OF POSTROUT BILL E

18514201

COPY OF 17836248 - DIFFERENCE BETWEEN 'COMPLETE' ON FA SCREEN AND 'COMPLETE' ON

18522038

COPY OF 18270677 - WRONG DATE FORMAT IN A FRENCH SESSION ON THE ERROR MESSAGE OF

18522109

COPY OF 18242864 - BILL ID MISSING WHEN NAVIGATING TO BILL PAGE FROM "FINANCIAL

18531347

CSS - AUDIT

18545161

COPY OF 18543275 - AFTER INSTALLING PATCH 18275116, TIMEOUTS ARE STILL EXPERIE

18560318

11753 - ILM INITIATOR - DEADLOCK IN BILL & BILL SEGMENT CRAWLERS

18591384

SYSTEM ERROR WHEN USING RATE SCHED V2 ON RATE CHECK

Bugs Fixed in Version 2.4.0 Service Pack 1

Bug Fix

Description

10142693

COPY OF 10053542 - CIPBFBAX - TABLE ACCESSED USING NON-INDEXED COLUMN

11901987

INSTALLING SAMPLE REPORTS STORED PROCEDURES

13921583

COPY OF 13486155 - CONFIGLAB DOES NOT RAISE ERROR WHEN MIGRATING CASE STATUS ALG

14551740

11740 ELECTRIC VEHICLE BILLING FR ISSUES

14674286

NSRD DATE BLANK RESULTS IN NULL POINTER ON USAGEREQUESTUPDATE

14684873

COPY OF 14262196 - CM OCBG - CORRECTED READ BO TRANSITION ISSUE

14684881

COPY OF 14497570 - CANNOT ADD FK CHARACTERISTICS IN METER CONFIGURATION PAGE

14684884

COPY OF 14515167 - REMOVE DISPLAY STATEMENT IN REGISTER READ ROW MAINT (CIPMRGRR

14684889

COPY OF 14561686 - FACOMPL ERROR MESSAGE NOT BEING POPULATED CORRECTLY

14684893

COPY OF 14595996 - BI: CCB EXTRACT- ISSUE IN POPULATING REL_TODOS_CNT FOR TO DO

14684895

COPY OF 14612243 - ERROR SAVING A ZERO TOTAL ADJUSTMENT AMOUNT IN ADJUSTMENT CON

14746866

BUTTONS ON UI MAP ARE LEFT-JUSTIFIED AFTER FW UPGRADE

14750369

COPY OF 14659699 - AFTER APPLYING PATCH 14604647 BATCH JOB IS STUCK IN PENDING I

14751382

COPY OF 14659703 - CANCEL REBILL IN V2_3 DOESNT TICK REBILLED BS FT AS A COR

14755167

CORRECTED READ NOTIFICATION NOT TRANSITIONED TO COMPLETE STATE AFTER RECIEVING T

14762728

COPY OF 12745066 - C1-ADMOV RAISED A SEVERE - CIPZCTJN - SYSTEM ERROR.

14762735

COPY OF 14644331 - REMOVE VALIDATION FOR ZERO DISTRIBUTION RULE AMOUNTS ON PAYME

14766316

LOCALIZATION - INCORRECT DISPLAY OF NEGATIVE VALUES AND DATE FORMAT

14793493

COPY OF BUG 14616555 - ROUNDING ERRORS IN CALCULATIONS

14802135

ADD FOREIGN KEY CONSTRAINT TO C1_USER_TNDR_SRCE

14802756

COPY OF 14346747 - CIPBCONC - CHANGE WARNING CRITERIA

14810192

GO TO RATE COMPONENT CLASSIC - SEARCH PAGE NOT DISPLAYING RATE COMPONENTS-V1 RS

14823292

USE THE BILL FACTOR CHAR TYPE/VALUE TO GET BF VALUE FOR ALTERNATE PAY CURRENCY

14830282

MOD 11747 - CALC RULE AND RATE SCHEDULE ISSUES

14830397

MOD 11747 - RATE ENGINE HELPER DESCRIPTION IS INCORRECT

14846658

ADD THE FW SEARCH BY SYNC REQ ID QUERY ZONE TO THE CCB SYNC REQ QUERY PORTAL

14846722

JAVA BILL SEGMENT INFO ALGO DOES NOT RETURN AN INFO STRING FOR PPB BILL SEGMENT

14846734

10412 - PPB BILL SEGMENTS GRAPH SHOWS FIRST 10 BS, NOT THE 10 MOST RECENT

14851361

10412 - CATCH POSSIBLE ERRORS WHEN FREEZING BS IN PPB ALGORITHM

14851888

10412 - SECTIONS IN THE RIGHT COLUMN OF PPB TASK DISPLAY MAP SHIFTS ON RESIZE

15833420

MOD 11670 - OLD RATE CHECK PAGE ISSUE

15833824

10412 - ERROR WHEN FREEZING AN ADJ FOR A NON-PPB SA

15834153

10412 - PPB AUTOPAY TO BE DISTRIBUTED ALERT IS DISPLAYED IN FINANCIAL INFO ZONE

15838474

COPY OF 15838358 - ALGORITHM TO CREATE TUM,SUB SA FOR NEXT TRUE UP PERIOD NEEDS

15838488

COPY OF 15838330 - C1-C0-NOGL ALGORITHM CALCULATION OF TOTAL AMOUNT SHOULD BE CH

15846328

MOD 11747 - %V SUBSTITUTION NOT WORKING THE SAME FOR ALL CALC RULES

15849925

COPY OF 14622138 - START METHOD ALGORITHM - CREATE SP AND SA BASE ALGORITHM IS C

15849928

COPY OF 14743884 - PROBLEM TO USE RATECOMPONENTCRITERIAFIELDALGORITHMSPOT

15849934

COPY OF 14793928 - WIN_START_DT NOT POPULATED IN BILLS COMPLETED BY BATCH

15851323

MOD 11747 - CHARACTERISTIC COLLECTION ON REFERRED CALC GROUP RULE IS NOT WORKING

15857235

REOPEN BUTTON DISABLED

15867122

COPY OF 15831357 - CLASSCASTEXCEPTION IN NBB RECOMMENDATION RULE AVERAGE ALGORIT

15878619

TOU GROUP FK HYPERLINK ON TOU MAP TEMPLATE MAP LEADS TO SEARCH PAGE

15881046

COPY OF 14809727 - MOD 11165 -JS ERROR ENCOUNTERED WHEN LOADING ACCT MGT PORTAL

15881111

ADJUSTMENT CALC LINE GRID ALIGNMENT ISSUE - APPEARS IN SUMMARY COLUMN

15881160

COPY OF 14827253 - CSS2-PORTAL-UNABLE TO SUBMIT ONE TIME PAYMENT IN OUCSS

15881167

COPY OF 14802743 - MOD 11747 - BSEG LINES NOT GEN'D - PM=ACCT DATE AND ACCT DATE

15881615

REMOVE UNNECESSARY DISPLAY STATEMENTS

15882892

WSS FIELDS - COLLAPSE THE FIELD WEB ACCESS FROM ACCOUNT/PERSONS TAB.

15897689

COPY OF 15868336 - CCB 2.3.1- BI BILLED USAGE FACT WRONG BILL DATE EXTRACTED

15897699

COPY OF 15837997 - CASH ACCOUNTING ADJUSTMENT CREATION ALGORITHM SETTING THE SHO

15897704

COPY OF 14843572 - BUDGETS NOT PRORATING - ONLY BILLING FOR ONE MONTH WHEN BILLI

15897707

COPY OF 14752085 - TO CASE STATUS ON THE LOG SHOULD BE STAMPED ON THE CLOG FLAT

15897711

COPY OF 14746445 - INCORRECT COLLECTION PROCESS TEMPLATE ON EXTRACT FILE FOR EXT

15897718

COPY OF 14729876 - ADDRESS EXTRACT - CITY VALUE NOT IN UPPER CASE

15897736

COPY OF 14688010 - AFTER APPLYING PATCH 14352927 GOT ERROR WHEN APPLYING SOME CO

15897750

COPY OF 13820457 - EXTRACTS FOR BI NOT GETTING ALL CHANGE LOGS IN CI_CHG_LOG FO

15956492

MOD 11747 - CALC RULE CALC SERVICE QTY UI MAINT MAP ISSUE WITH MVA FIELD

15972569

COPY OF 14466903 - FA COMPLETION ZONE IS ALWAYS VISIBILE ON THE FA PAGE

15972574

COPY OF 14668296 - PATCH 12999534 DID NOT RESOLVE ISSUE WITH NEGATIVE ADJUSTMENT

15972579

COPY OF 14705800 - BATCH JOB TREND REQUIRES TO DO ROLE TO CREATE A TO DO

15972585

COPY OF 14706919 - COLLECTION PROCESS EXTRACTING THE INCORRECT COLLECTION ARREAR

15972602

COPY OF 14751181 - CIPOADB DOES NOT BREAK ON SCHEDULE DATE BUT HELP DOCUMENT STA

15972609

COPY OF 14782380 - AFTER INSTALLED PATCH 14526215, SEE SQL ERROR CODE OCCURRED I

15972628

COPY OF 14840461 - EXTRACTFAINFO CILOEFIP DOES NOT RETURN BOTH ACCOUNTS IN BACK-

15972699

COPY OF 15851041 - METER READ STEP TYPE PROCESSING DOES NOT CONSIDER FLAGS

15972703

COPY OF 15904426 - ERROR ON USAGE PERIOD FOR USAGE REQUEST WHEN FINAL BILLING AN

15972706

COPY OF 15948996 - PAYMENT EVENT PAYMENT GRID USER EXIT ISSUE

15976796

COPY OF 14739809 - SELF-SERVICE INTEGRATION MASTER CONFIGURATION HANGS

15977180

COPY OF 14782484 - {INFO} WHY THE CILBCRNP SERVICE DOES NOT SUPPORT DEFAULTING P

16013490

COPY OF 15973977 - BUD_PLAN_CD RESET IN CI_ACCT WHEN OVERPAYMENT KEPT ON ONE TIM

16015557

THE READ DATE FIELD IN TREND MAINTENANCE PAGE IS DISABLED WHEN RECORD IS ALREADY

16017382

COPY OF 13997048 - CORRECTION NOTES FOR PERCEPTION

16017392

COPY OF 14623724 - COLUMN AMBIGUOUSLY DEFINED ERROR WITH CONFIGLAB

16017400

COPY OF 14744224 - RATE CHECK PAGE IS NOW REQUIRING AN OPTIONAL FIELD(SA ID) AFT

16017404

COPY OF 15930176 - INDEXES ON CI_USAGE

16019828

CONVERT RATE ENGINE UI MAPS TO USE UI HINTS

16031296

COPY OF 16006280 - ISSUE WITH DUPLICATE ACTION

16046195

COPY OF 16035840 - WX-RLSTPAY ZONE DOES NOT RETURN THE PAYMENT AMOUNT VALUES

16067561

COPY OF 14681614 - ALLOW CCB READ BOS FOR MDM2 INTEGRATION TO OUTPUT EMPTY ELEME

16067568

COPY OF 15856244 - CHANGE THE BILLABLE CHARGE TEMPLATE

16074156

COPY OF 15921165 - CIPHFGLB - KEEP OLD FORMAT OF STATISTICAL AMOUNT

16093961

COPY OF BUG 15962754 - TRUNCATED ERROR MESSAGE (RELATED TO BUG 14598223)

16164679

PROBLEM WITH CCB V2.4.0 BO (CI_SERVICEPOINTAUDIT) CANNOT CREATE SERVICE POINT

16166755

COPY OF 14778502 - WHAT'S THE CAUSE OF ¿A REQUEST IN WAIT FOR RESPONSE STATUS EX

16166758

COPY OF 15986132 - PREMISE TREE NOT POPULATING

16166775

COPY OF 15947485 - CCB 2.1.0 - AUDIT LOGS NOT CREATED FOR RATE VERSION MERGE

16166788

COPY OF 14748139 - TEST MODE IS NOT WORKING WHILE RUNNING BATCH JOB CI_ARCBI CIP

16166792

COPY OF 15991477 - PATCH 15948996 DID NOT RESOLVE INABILITY TO DELETE ROWS FROM

16166800

COPY OF 16014697 - SYSTEM SHOULD NOT ALLOW GENERATE A CORRECTION NOTE FROM AN OF

16206702

NEW COUNTRY ADDRESS CANNOT BE SHOWN IN PREMISE CORRECTLY ON 2.4.0 CCB

16229506

AN ALGORITHM (ATTACHED TO ALGORITHM TYPE CCAL-FAERMSG) DOES NOT PROPERLY DISPLAY

16239698

NULL POINTER EXCEPTION IN ITEM TYPE V2 RULE WHEN ITEM HAS NO UOM

16262522

COPY OF BUG 16412611 - CUSTOMER CONTACT PAGE NO LONGER DEFAULT EMAIL ADDRRES WHE

16265635

COPY OF BUG 16236520 - METER STOCK LOCATION INVENTORY SCREEN UNUSABLE

16269368

SEASONAL UI MAPS DISPLAYING UNNECESSARY SCOLL BAR

16270782

COPY OF 15837342 - SUMMARY ACCT BILLING WITH MDM - CREATING ADDITONAL BSEG IN SA

16279927

COPY OF 16203040 - ARCHIVING PROCESS AR-DCDT RUNNING VERY SLOW

16280852

11752 SEPA FILE LAYOUTS

16352794

FIELD "NON-BILLABLE BUDGET MONITORING" MISSING IN CCB 2.4

16358094

MISSING PHYSICAL PRIMARY KEY CONSTRAINT

16362226

COPY OF 14036807 - LAST METER READ DATE IS NOT ACCURATE ON THE PREMISE INFORMATI

16362229

COPY OF 15955246 - OFF CYCLE BILL GENERATOR (OCBG) PICKS UP UN-SELECTED ADJUSTME

16362235

COPY OF 15965627 - UNEXPECTED SQL ERROR 9994 RAISED BY STANDARD MRRCREAM ALGORIT

16362240

COPY OF 15972123 - SUBSTR FUNCTION CAUSES TIMEOUT IN CIPPMBSL QUERY

16362243

COPY OF 16048200 - ISSUES WHEN REINSTATING A SERVICE AGREEMENT

16362248

COPY OF 16316973 - 'OUTBOUND MESSAGE CREATION FAILED' WARNING MESSAGE APPEARS WH

16362250

COPY OF 16290178 - ISSUE WITH PAYMENT DISTRIBUTION

16362252

COPY OF 16285341 - EXTSAARS ISSUE WITH COMPUTING ARREARS

16362254

COPY OF 16276988 - NON CIS PAYMENT CANCELLATION FT ASSIGNED WRONG GL ACCOUNT

16362256

COPY OF 16224881 - C1-BLCMP NOT COMPLETING CLOSING BILL BECAUSE OF BILL CYCLE MI

16362258

COPY OF 16215620 - ABLE TO DUPLICATE READS ONLINE ON METER READ PAGE

16362261

COPY OF 16198223 - SA RATE INFO TAB DOES NOT HANDLE MORE THAN 100 BILL FACTOR

16362265

COPY OF 16196803 - READ HISTORY PAGE UNCONSISTENT WHEN USING NEGATIVE CONSUMPTIO

16362268

COPY OF 16195668 - BUG IN THE C1-RC-CLAMT (SUM CALC LINE AMOUNTS) ALGORITHM TYPE

16362271

COPY OF 16187760 - ADD VALIDATION FOR DISABLE CORRECTION NOTE FOR OFF CYCLE BILL

16362276

COPY OF 16184797 - LOAN SA WON'T CLOSE

16362279

COPY OF 16171261 - BUG C1-PEPL3 PROCESS WHEN A TENDER CONTROL IS NOT BALANCE

16366277

TREND AREA ISSUE IN CCB VERSION 2.4

16375067

CC&B V2.4: CALCULATION RULE STEPPED SERVICE QUANTITY RETRIEVING 0 USAGE

16390092

CALCULATION RULE ADD ISSUE

16397773

COPY OF 16229903 - TWO PENDING BILLS FOR THE SAME ACCOUNT

16398220

COPY OF 16383677 - 'BAD DATA' IN DESCRIPTION FIELD OF THE CI_SCR_STEP_L TABLE

16405477

FIX FINAL BILL HANDLING FOR NEM

16405664

EVALUATE VALID CONDITIONS FOR WHEN NO DATA IS RETURNED TO CSS

16405973

COPY OF 16405928 - ADD A NEW SERVICE TO RETRIEVE SAS EFFECTIVE ITEMS

16434225

NUMERIC OVERFLOW ENCOUNTERED WHEN USING RATE CHECK FUNCTION - ADJUST USAGE

16441287

PHYSICAL/BUNDLING BOS MARKED AS INSTANTIABLE

16470923

COPY OF 16311344 - AFTER APPLYING PATCH 15947485 - AUDIT LOGS NOT CREATED FOR R

16470949

COPY OF 16296456 - END BILL SEGMENTS WITHOUT CLOSING FLAG

16470969

COPY OF 14049741 - STOP SA ALGORITHMS ON A DEPOSIT SA TYPE ARE NOT TRIGGERED

16470980

COPY OF 14102223 - OM02463;MEDIUM;CONFIGLAB: CASE LOG - DATA DIFF INFO - CLBDSYN

16471151

COPY OF 15995022 - SAVEPOINT ISSUE WHILE RUNNING CASETRAN BATCH

16471155

COPY OF 16263025 - ERROR WHEN TRYING TO ADD A PAYMENT IN THE PAYMENT PORTAL

16471162

COPY OF 16324927 - ERROR EXISTING SAVEPOINT BY NAME CREATEUSAGEREQUEST

16471789

COPY OF 16389061 - CONTROL CENTRAL ACCOUNT SEARCH FAILS WHEN ACCOUNT NOT LINKED

16471800

COPY OF 16396020 - THE FT DATA ARE NOT CORRECT WITH A XFER ADJUSTMENT

16471812

COPY OF 16405771 - METER LOCATION IS NOT GETTING UPDATED

16484441

COPY OF 14845003 - MOD 11747 - UNABLE TO UPDATE RATE DETAILS WHEN APPLY CALC RUL

16500710

CONVERT CATEGORY TYPE CUSTOM SEARCH TO DROPDOWN ON CALC RULE

16516712

DEVELOPMENT SYSTEM DATA APPEARS IN DEMO AND V2.4.0 ENVS

16531275

C1FACOMPLETIONEXTSYSSTRUCT SERVICE ELEMENT NAME INCORRECTLY CHANGED

16531293

COPY OF 16511246 - NEW BUDGET AMOUNT FOR SA IS NOT DISPLAYED ON BUDGET RECOMMEND

16538510

COPY OF 16538507 - MAILING PREMISE WARNING ON START STOP

16547461

MODIFY TASK CLASS BO OPT VALUE OF SVC TASK TYPE BOS MAINTAINED IN THE GEN PORTAL

16563373

DUPLICATE CALC GROUP SHOULD INCLUDE DESCRIPTION

16574453

COPY OF 16243223 - TOO MANY OPEN CURSORS IN THE REGISTRY TRYING TO VIEW THE CHI

16574460

COPY OF 16391831 - TD-PURGE DOES NOT DIVIDE WORK CORRECTLY BETWEEN THREADS

16574462

COPY OF 16409457 - CORRECTING CERTAIN BASE SQLS: UPDATE TENDER CONTROL

16574464

COPY OF 16507113 - CANNOT CHANGE ACCOUNT ID ON SUB SERVICE AGREEMENT

16585989

USENEW RATE TO GENERATE A QUOTABLE SA SHOW ERROR "INITIAL SERVICE QUANTITY"

16591126

REMOVE WORKLIST ICON FROM SA CREATION RULE COLUMN OF THE SA CREATION RULES ZONE

16593914

CREDIT NOTE POST BILL AND BILL COMPL ALGS FREEZE ADJUSTMENTS AFTER CREATION

16607524

COPY OF 16195599 - CCB 2.3.1 ENCODING ERROR FOR SIMPLIFIED CHINESE CHARACTERS IN

16607525

COPY OF 16384496 - DEPOSIT CALCULATE NOT CORRECT FOR SOME ACCOUNT

16616027

SP ID FIELD MISSING ERROR ENCOUNTERED WHEN SP SHOULD HAVE BEEN CREATED

16627252

CMA -ISSUING CENTER SERVICE C1ISSCTP HAS NO SERVICE LIST FOR C1_ISS_CTR_LOG_PARM

16674757

LANDLOARD SEARCH DOES NOT SUPPORT LIKEABLE SEARCH

16695489

COPY OF 15848054 - AFTER CCB V2.3.1 UPGRADES TO SP6, ORDER CREATION FUNCTION RET

16718655

BOLD TEXT LABEL ON LOAN SA

16719106

ERROR ENCOUNTERED WHEN BUNDLING IS ENABLED FOR CALC RULE

16725086

SEND RESOURCE CODE FOR CSS IMAGE

16726488

RATE CHECK PORTAL UI ISSUES

16738812

TRANSITION ERROR ALGORITHM MAY LOG WRONG

16742016

BILL FACTOR CODE COLUMN IS NOT POPULATED FOR CALC RULE

16743498

87029 - VALIDATION PLUGIN NOT ADDING ERROR TO MO LOG

16743528

87042 - INCORRECT MESSAGE ON MISSING ACCOUNT ID

16744500

COPY OF 16555125 - CCB 2.1 LEAP YEARS HANDLING

16744518

COPY OF 16305523 - OUBI CF_ARREARS LOAD

16744527

COPY OF 16500353 - PATCH 14668296 DID NOT RESOLVE ISSUE WITH NEGATIVE ADJUSTMENT

16744530

COPY OF 16506150 - ISSUE ON ALGORITHM THAT SUPPRESSES PRINTING BILLS AFTER FINAL

16744533

COPY OF 16527377 - THE ADHV-DTD ALGORITHM TYPE BEHAVES DIFFERENTLY ON A PERSON A

16744543

COPY OF 16534724 - INTERFACE UPDATE REQUIRED FOR CUSTOMER CLASS - OVERPAYMENT DI

16744549

COPY OF 16602911 - METER READ NOT FOUND ERROR WHEN RE-GENERATING A BSEG FOR A CO

16744561

COPY OF 16635455 - UPDATE DTTM ISSUE WHEN LOADING FACT EXTRACTS INTO BI

16744568

COPY OF 16635481 - SA ARREARS SNAPSHOT (EXTSAARS) EXTRACT ISSUE WHEN RUNNING FOR

16744576

COPY OF 16657601 - ARREARS DATE CHANGE IN CI_FT IS NOT CAPTURED BY FINANCIAL FAC

16744585

COPY OF 16595606 - BATCH CONTROL BCGSNAP HAS A NEW DEFAULTED PARAMETER THAT MUST

16744593

COPY OF 16708741 - CCB 2.4 ENCOUNTERING A ORA-00904: INVALID IDENTIFIER ERROR WI

16744618

COPY OF 16381853 - NEW RATE CHECK NOT PASSING OVERRIDE CHARACTERISTICS TO ELIGIB

16745404

INDEX NAMES INCORRECT ON CI_BILL_CHAR

16757152

CCB_24_AR:2237:ENGLISH BLEED-THROUGH - 2 OCCURRENCES

16761769

COPY OF 16709411 - PREMISE AND PERSON TREE NOT POPULATED

16762684

V2 RATE SCHEDULE/CALC GROUP/CALC RULE ISSUES - V2.4.0.1.0 QA WEEK 2 FUNC1

16769438

BILL SEARCH QUERY ZONE RESULTS SHOULD BE ORDERED BY BILL DATE DESC

16775629

BS THAT REFERENCE AN APP SVC WITHOUT EXECUTE ACCESS CAN'T BE EXECUTED FROM BPA

16789041

CHANGE BILL ROUTING COLLECTION ROUTINE TO USE PRIMARY INDEX

16792809

CCB_24_FR:2237:HELP INDEX - ENTRY POINT=&QUOTNONE"

16795431

COPY OF 16795405 - SA ARREARS SNAPSHOT (EXTSAARS) EXTRACT ISSUES

16795534

VALUE MUST BE BLANK ERROR WHEN UPDATING APPLY TO CALC RULE

16796010

COPY OF 16730737 - UNABLE TO COMPLETE NON-CIS PAYMENT DUE TO LIMITED MAX NUMBER

16812049

APPOINTMENT HYPERLINK IS NOT WORKING PROPERLY

16816805

COPY OF 16811813 - INCORRECT TO DO ROLE SAVED IN THE ACCOUNT MANAGEMENT GROUP PA

16817056

87048 - FORMS SERVICE TASK TYPES ARE NOT FILTERED IN MASTER CONFIGURATION

16820595

COPY OF 16689715 - "BILL SEGMENT DOES NOT EXIST" TO DO ENTRY CREATED DURING BILL

16820606

COPY OF 16635216 - OUCSS - ADDRESS MAINTENANCE SOURCES FOR READ AND UPDATE

16820614

COPY OF 16553231 - OVERRIDE THE DESCRIPTION OF AN EVENT OF OVERDUE PROCESS IS NO

16827347

11752 - SEPA ATTEMPTS TO ADD A DIRECT DEBIT MANDATE ENDS IN SERVER ERROR

16828421

COPY OF 16817617 - ALLOW ESTIMATES CHECK BOX NOT DEFAULTING CHECKED ON SA PAGE

16829530

DUPLICATING USER - TENDER SOURCES ARE NOT COPIED

16832009

87040 - C1-BLDNMNOTF SCRIPT IS THROWING SERVER ERROR WHEN INVOKED

16834989

COPY OF 16494421 - TO DO LIST DOES NOT ORDER THE DATA BY SORT KEY FOR TD-HILO

16834991

COPY OF 16605294 - WRITE-OFF AGENCY REFERRAL CREATES ORPHAN REFERRAL RECORD WHEN

16836371

COPY OF 16018890 - MAX GRID AND HOTSPOT ERROR WHEN WE RUN AR-DCDT

16837045

IT WK5 87040-NOTIFICATIONS : CANNOT INACTIVATE ACTIVE SERVICE TASK

16837276

IT WK5 87040 - NOTIFICATIONS : TRANSITION ERROR

16837535

87040 - CHANGE TO LOGIC FOR BUILD NOTIFICATION.

16837928

UNABLE TO OVERRIDE VIA CM C1-OCBGEN BASE MO OPTION OCBG CORRECTED READ BO

16841723

GETSTATEID() METHOD OF ENTITIES WITH COUNTRY/STATE THROWS NULLPOINTEREXCEPTION

16841953

11697: SP SEARCH NOT RETURNNG SOM MANAGED SP'S.

16843758

COPY OF 16823705 - THE ALGORITHM COMPONENT "NAME" MUST IMPLEMENT A VALID ALGORI

16850118

87048- FORMS: MISSING BATCH CONTROL ON AWAITING RESPONSE STATE

16850218

IT WK5 87048-FORMS CLOSED FORM DOESNT SHOW PROPER ACTION BUTTONS

16856546

87048 - FORMS : NEW ALGORITHM TYPE FOR CLOSED STATE

16856937

COPY OF 16826620 - DUPLICATE KEY GENERATION ON CI_FT_K

16866830

87048 - REVIEW COMMENTS FROM CSS TEAM

16870397

87040 - C1-BLDNMNOTF SCRIPT IS UNABLE TO BUILD NOTIFICATIONS PROPERLY

16871122

87048 - C1-BLDFRNOTF SCRIPT IS UNABLE TO BUILD NOTIFICATIONS PROPERLY

16871305

INVALID LOOKUP VALUE IS PASSED ON PAYMENT METHOD BY WX-PROCAPAY

16875442

COPY OF BUG 9976505 - COPY OF 9976186 - FIX 9828739 ISSUE: MANUAL DISTRIBUTION T

16880329

MOD 11748 - GOT SQL ERR CODE 999999994 DURING BATCH C1-PEPL2

16881349

COPY OF 16874574 - REQUEST TO CREATE JAVA TO COBOL WRAPPER FOR CIPOOFSN ROUTINE

16884006

BILL EXTRACT XML FILE ALGORITHM IS THROWING NULLPOINTEREXCEPTION

16886517

COPY OF 16841528 - C1-PEPL2 IS NOT PROCESSING ACCORDINGLY

16886885

COPY OF 16884153 - CSQ RULE BATCH ERROR:ILLEGAL ATTEMPT TO ADD ENTITY FROM IMMUT

16886964

DOCUMENTATION ISSUE - LIFECYCLE OF PENDING START

16889652

87040 - DEFINE MD FIELDS FOR WX-NOTFPREF SCRIPT SCHEMA ELEMENTS

16893263

COPY OF 16717317 - CUSTOM BILLING CONSUMPTION SERVICE GENERATES INCORRECT BILL

16893285

COPY OF 16854227 - DUPLICATE KEY ERROR RAISED WHEN CHANGING SA START DATE

16893290

COPY OF 16874238 - ISSUE AFTER PATCH 9952846 - COPY OF 9915974 - ITEM COLLECTION

16899079

87026 - UNABLE TO DISPLAY PA TASK TYPE IN SELF SERVICE MASTER CONFIG MAINT UI

16908652

ERROR WHEN GENERATING ADJ FOR BD SA USING V2 RATE SCHEDULE

16914597

COPY OF 14509496 - MATCHING ISSUE WITH OVERPAYMENT

16916624

COPY OF 16884032 - THE SCHED_EXTRACT_DT FIELD IS NOT SETTING WHEN A AUTO PAY IS

16916981

87040 - MISSING SERVICETASKID NODE PREVENTS CREATION OF NEW SERVICE TASKS

16917356

87040 - CLICKING THE NOTIFY BUTTON IN NOTIFICATION SERVICE TASK RESULTS TO ERROR

16922463

PROBLEMS IN SET10 - BILL AND PAYMENT

16923710

87048 - ALERT HANDLING

16923985

NO ERROR IS THROWN WHEN MVA IS SET TO ERROR FOR CSQ CALC RULE

16924251

87048 - FORMS LIST LAST UPDATE DATE CRITERIA

16924909

87040 - PPB SUPPRESSION SCRIPT NOT ABLE DETERMINE SUPPRESSION CRITERIA PROPERLY

16925309

87048 - FORMS LIST RESULT NOT SORTED BY LAST UPDATE DATE

16927225

COPY OF 16926221 - BILLABLE CHARGE TEMPLATE IS PROTECTED WHEN ADDING A BILLABLE

16928392

11697 - SERVICE TASK NOT TRANSITIONED TO ERROR IF AN ERROR IS ENCOUNTERED

16931855

87040 - UPDATES TO NOTIFICATION PREFERENCES SHOULD BE ALLOWED

16932410

87044 - ALERT INFO SECTION IN SEVICE TASK TYPE DISPLAY NOT PROPERLY DISPLAYED

16936495

MOD 11748 - ALGORITHM TYPE C1-ENCR-CRVL IS MISSING NULL CHECK CAUSING SYSTEM ERR

16940842

CAPITALIZE CODE VALUE ON THE MAINTENANCE UI MAP

16950369

COPY OF 16943397 - CIPBBILB - MAXIMUM NUMBER OF OPEN BILL CYCLES WAS REACHED AGA

16963924

COPY OF 16954577 - BILL CYCLE CHANGE NOT REFLECTED ON USAGE BILL CYCLE CHANGE N

16964224

COPY OF 16926759 - ONE-TIME SA GOES TO REACTIVATED STATUS RATHER THAN STOPPED ST

16965908

CALC RULE SEASONAL THROWS OVERLAP ERROR WHEN THERE IS NO OVERLAP

16966010

OVERRIDE PRORATION ALG FOR CALC RULE IS NOT BEING INVOKED IF ENABLED

16968321

CI_PAY_EVT_CHAR MISSING ON PAY EVENT MO

16973619

COPY OF 16957630 - DISTRIBUTION CODE IS NOT ASSIGNED IF THE CAL RULE IS SET TO R

16975316

87048 - CHANGE TO LOGIC FOR FORMS BUILD NOTIFICATION

16984010

REPORT CI_FOPRNT RETURNS %PDF ERROR IN V2.4.0.1.0 BI PUBLISHER 11.1.1.7

16985557

COPY OF 16952801 - ERROR WHEN UPDATING A PAY PLAN WHEREAS THE ACCOUNT AUTO PAY I

16986146

11752 - SEPA FR CHANGES

16986811

COPY OF 16946605 - SERVICE ACTIVITY SHOULD HAVE AN STATUS ON ACTIVE IN THE LOOK

16988477

87029 - PROCESSING ERROR ENCOUNTERED WHEN USING SSN AS IDENTIFIER IN SOAP REQUES

16998933

87060 - SCALAR USAGE DETAIL IS NOW RETURNED FOR EVERY ELIGIBLE SA

17000875

87045 - CHANGE LOGIC OF SEND PPB NOTIF TO CSS FOR CHANGES MADE BY BUG 16837535

17008982

87040 - ERROR RETURNED WHEN BATCH C1-UPDNT HAS ONLY ONE PARAMETER VALUE

17011500

COMPARE UTILITY ERROR 1024 ON BATCH CI_COPRP

17013636

SERVER ERROR IN 2.4.0.1.0 BUILD 9 ON V2 SIMPLE SUMMARY DISPLAY

17015472

87048 - ADDITIONAL INFORMATION NOT SHOWN IN FORM TASK PAGE

17015496

87048 - CLOSE REASON IS NOT DISPLAYED IN CLOSED FORM TASKS

17019838

COPY OF 17014410 - DUPLICATE KEY ERROR WHILE CREATING SP METER HISTORY

17020477

DELETE UNUSED MESSAGES FROM CICCMSG8 COPYBOOK

17026132

COPY OF 17020152 - USING NEW PREMISE WITHOUT POSTAL CODE, SYSTEM THROWS ERROR ON

17026470

87045 - FR - PREPAID CUSTOMER ENHANCEMENTS

17026606

87040 - DUE DATE IS NOT POPULATED FOR BILL DUE NOTIFICATIONS

17031171

FR - UPDATING DESCRIPTIONS OF VARIOUS CSS OBJECTS

17034155

87048 - WX-FORMSMGMT IS REFERENCING UNUSED DATA AREAS

17034219

87040 - C1-BLDNMNOTF - CHECK IF NOTIFICATIONS OF SERVICE TASK BO IS POPULATED

17037041

COPY OF 17014884 - FINANCIAL FACT'S CALCULATED AMOUNT INCORRECT FOR BILL SEGMENT

17039172

COPY OF 16794117 - METER REPLICATOR WON'T WORK REPLICATING 1 METER BADGE PREFIX

17039181

COPY OF 16947308 - ADJCALCLINE DEFINED IN WSDL IS MISSING IN RESPONSE

17041852

87045 - NO ERROR ON MISSING C1-PPBMAININ SCRIPT IN SS MASTER CONFIG

17049603

COPY OF 17031914 - RECEIVED WARNING ADDRESS SOURCE IS MAILING PREMISE BUT ACCOUN

17051241

COPY OF 16945753 - {INFO} SERVICE QUANTITY RULE RESULT DECIMAL PRECISION

17051758

COPY OF 16961259 - THE TODO CHARACTRISTIC NOT SET BY THE TDCR-CHAR ALGORITHM (CA

17055134

87040 - DEACTIVATE ACTIVATE BUTTON NOT WORKING PROPERLY ON NOTIFPREF SERVICETASK

17058053

87045 - PPB ALERT IS NOT DISPLAYED ADJ. PAYOFF BAL. < MIN BAL

17058602

87040 - ADDITIONAL CHANGES FOR LATE PAYMENT NOTIFICATIONS

17067916

87029 - CSS START STOP - ED CHANGES

17071082

87048 - NOTIFICATION RETRY SECTION NOT GETTING POPULATED

17083344

87048 - ADD ERROR PROCESSING TO FORMS MANAGEMENT SERVICE

17083418

10751 REPRESENTATIVE CODE SHOULD AUTO-CAPITALIZE ON ADD

17084121

87048 - FORM TASK BO LIFECYCLE CHANGES

17084194

87048 - MAINTENANCE MAP FOR FORM COMMENTS AND ATTACHMENTS

17088479

MISSING DRILL KEYS ON CSS TO DO TYPES

17156094

ONLINE BILLING IS NOT WORKING

17158698

STATUS REASON ON BO LIFECYCLE SHOULD BE SET FOR STATUSES THAT REQUIRE A REASON

17158806

COPY OF 17010281 - BILLING BATCH NOT PICKING UP ACCOUNTS WITH CREDIT NOTES ON TH

17160247

10751 - NULLPOINTER ERROR ON GENERATE LEAD IF MAX NUM OF LEAD IS BLANK

17167239

ADD AN EXTRA COLUMN TO EXISTING INDEX ON CI_SA_CONTERM

17173322

10751 - BILL MESSAGE TRUNCATED IN THE BILL INSERT LEAD EVENT MO LOG

17173520

10751 - LEAD AND LEAD EVENT LOGS FOR CREATED LEAD EVENT DON'T HAVE LEAD EVENT ID

17177091

COPY OF 16997585 - NBB AVG DLY AMT IS UNDER CALCULATING WHEN THERE'S A CANCEL/RE

17177113

COPY OF 16959290 - TO DO ENTRY FOR AN SA IS DUPLICATED

17177132

COPY OF 16991289 - FIELD ACTIVITY INTEGRATION IS STILL TRIGGERED WHEN A WARNING

17177925

10751 - NO ERROR IN C1-LEADG BATCH IF MAXIMUM NUMBER OF LEADS IS "0"

17178395

10751 - NO ERROR IN C1-LEADG BATCH IF INITIATIVE IS IN "INACTIVE" STATUS"

17180154

87029 - BILL ROUTE AND MESSAGE CHANGES

17181638

10751 - SUBJECT OF THE EMAIL TO INFORM REP ABOUT LEAD SHOULD BE INITIATIVE INFO

17187839

2.4 RATE ENGINE ISSUE - DO NOT PRINT IF ZERO

17192506

COPY OF 17176598 - ERROR 500 WHEN CLICKING TO VIEW A RUNNING THREAD IN BATCH RUN

17193552

MOD 10751 PROGRAM MANAGEMENT FUNCTIONAL REVIEW

17196338

INIT INST: SERVER ERROR WHEN SEARCHING BILLABLE CHARGE LINE TYPE

17198350

11697 - SOM - NEW PREM INFO ZONE INCORRECTLY DISPLAYS ITEM INFORMATION

17200140

ADD ERRORINFORMATION TO WXCREATEMETERREAD AND WXGETCONSUMPTIONSUMMARY SERVICE

17200679

10751 - MESSAGE PARAMETER (%2) IS INCORRECT FOR MESSAGE 11118,13106

17214769

DISPLAY ALL DETAILS OF THE CRITERIA IN CALC RULE ELIGIBILITY CRITERIA LIST ZONE

17215894

87048 - UNABLE TO READ CAMPAIGN FIELDS USING WXFORMSMANAGEMENT SERVICE

17217304

87040 - BILL DUE NOTIFICATION ISSUE USING OLD BO

17220482

COPY OF 17180724 - 2.4 RATE ENGINE ISSUE - PRECISION IS NOT APPLIED ON CALC LINE

17221048

MOD 10751 - LEAD EVENT NEEDS NEW AUTO TRANSITION BATCH PROCESS

17222553

COPY OF BUG 17089119 - CCB 2.4 NEW RATE ENGINE CALC RULE ELIGIBILITY CRITERIA ER

17230469

10751 - MANUAL UPDATE ON CM-ABLE FIELDS

17230507

COPY OF 16443803 - IMPROPER USE OF SAVEPOINT IN JAVA

17231383

SQL SEARCHING BY [ADHOC]_CHAR_VAL INSTEAD OF SRCH_CHAR_VAL

17231391

COPY OF 17059419 - AFTER APPLYING PATCH 16841528 - C1-PEPL2 IS NOT PROCESSING AC

17236330

COPY OF 17044798 - ADJUSTMENT FT CREATION ALGORITHM TYPE C1-FTGL-ADNM ISSUES

17239084

ENABLE UI HINTS ON C1-CALCLINEDISTRIBUTION DATA AREA

17244194

MOD 10751 - LET: INFORM CUST VIA SMS - UI DROPDOWNS CONTAIN INVALUD VALUES

17246228

87040 - ROLLBACK CHANGES IF NOTIFICATION CREATION ENCOUNTERED AN ERROR

17247136

87048 - FORM TASK NOT TRANSITIONING TO CLOSED STATUS WHEN MAX RETRY IS REACHED

17257297

NEAR REAL-TIME SYNCS FOR SP AND SA CREATES DUPLICATE RECORDS IN MDM

17263485

BILL PRINT (CCB-MDM) FUNCTIONAL REVIEW

17263774

10751 - MESSAGE PARAMETER (%4) IS INCORRECT FOR MESSAGE 11118,14101

17267162

87040 - CHANGE THE LABEL OF NOTIFICATION PREFERENCES ZONE'S FIRST COLUMN HEADER

17267324

87048 - DUPLICATE KEY ERROR ENCOUNTERED DURING NOTIFYING CUSTOMER

17267411

87040 -UNABLE TO SEARCH FOR POSSIBLE VALUE OF CONTACT CLASS IN NOTIFICATION PAGE

17267557

87048 - REMOVE THE NOTIFICATION DETAILS SECTION IN C1-FORMTASK BO

17267929

87048 - DISPLAY CAMPAIGN FIELD PROMPT IN FORM TASK DISPLAY

17274460

87045-CSS2-UNEXPECTED ERROR IN PREPAID ENH DISPLAY

17275389

NLS:UI -CCB - SOURCE STRING TRUNCATED

17276605

11752 - USAGE FLAG ON THE COUNTRY CODE EXTENDABLE LOOKUP NOT SHOWN ON THE MAPS

17284189

COPY OF BUG 17284241 - BATCH C1-BNBAS MAX COMMIT UNIT IS NOT SET TO ONE

17285731

UNABLE TO ADD A PERSON - SERVER ERROR RETURNED

17290731

MOD 10751 - TABLES DATA CONVERSION ROLE SHOULD BE NOT CONVERTED

17291250

COPY OF 16574892 - OBJECT REQUIRED JAVASCRIPT ERROR WHEN UPGRADING CCB 2.1 TO 2.

17291514

10751 - ADD NEW INDEX ON LEAD AND LEAD EVENT TABLES

17302226

87048 - FORMS LIST NAVIGATION RESULTS HAVE INVALID SETS OF FORM DETAILS.

17302356

87048 DELETE BS/ZONE C1-GETFORMS

17307733

COPY OF 17084516 - SCROLL SORT FOR NON-CASH DEPOST ACTIVITY IS DIFFERENT FROM AU

17307736

COPY OF 17184414 - MAX BILL THRESHOLD ERROR ROLLS BACK FOR SUB BILL SEGMENT

17307750

COPY OF 17227663 - DATA STORED IN CI_FA.FA_DATA_AREA IS REMOVED AFTER SAVING DIS

17307753

COPY OF 17286040 - AFTER INSTALLATION OF BUG 17006758 - CIPPDSAN HAS INCORRECT F

17307757

COPY OF 17171008 - BASE BILL PRINT EXTRACT POPULATING INCORRECT VALUES FOR THE D

17308312

10751 FR - INITIATIVE STATISTICS ISSUE

17308672

PAYMENT ARRANGEMENT ALERT FOR PREPAID WAS DISPLAYED IN OUCSS DASHBOARD

17309596

87029 - MOVE NEXT STATUS "DISCARD" FROM "PENDING" TO "AWAITING PROCESS"

17309739

87026 - FR ITEMS FOR PAYMENT ARRANGEMENT

17310584

CMA - EXPORT/IMPORT ERROR DUE TO MO F1FK/F1PB HAVING MORE THAN ONE HIGHEST SEQ

17312243

COPY OF 17259291 - LINK MISSING FROM BILL SEGMENT CALC TO BILLABLE CHARGE

17312340

87029-WHEN SRV TASK TYPE IS INACTIVE, ERROR S/B GENERATED WHEN SUBMIT

17314889

SERVER ERROR RETURNED WHEN ADDING A PERSON

17317619

ERROR ON THIS SCRIPT FILE - 13483058_RS1.SQL

17317753

87040 - CCB ERROR ENCOUNTERED DURING UPDATE OF NOTIFICATION PREFERENCES

17319588

87040 - CONTACT TYPE DROPDOWN NOT POPULATED IN NOTIFICATION TASK TYPE

17329225

CONTRACT OPTION TYPE SHOULD BE ALLOWED ON BD SA

17330828

10751 FR - INITIATIVE CRITERIA ISSUES

17342127

COPY OF 17291943 - COBOL CRASHES IN MICROFOCUS RUNTIME

17342973

COPY OF 17340396 - CHANGE IF PERIOD IS CLOSED INSTALLATION OPTION DOES NOT WORK

17355306

DESCR50 FIELD DEFINITION IN COBOL WRAPPER PROGRAMS IS OBSOLETE

17356148

REMOVE WARNING FROM START STOP TRANSACTION

17356248

PREMISE SEARCH PAGE FIELDS POPULATED ONCLICK OF SEARCH FOR PREMISE BUTTON

17361346

ERROR MESSAGE RETRIEVED IN SOAP FAULT FROM XAI SERVICE NEEDS TO BE CORRECTED.

17361641

REGISTER CONTEXT MENU DOES NOT NAVIGATE TO METER CONFIGURATION ON METER TREE UI

17362563

87048 -FUNCTIONAL REVIEW ITEMS FOR FORMS

17362583

MOD 10751 FR - INITIATIVE CRITERIA TABLE SHOULD NOT BE CACHED

17363283

INCORRECT FIELD REFERENCED BY "LABEL" HEADER IN THE SELF-SVC MASTER CONFIG MAPS

17369727

87040 - CHANGE LABEL FOR FORMS ON MASTER CONFIG.

17377238

10751 FR - LE TYPE USING MARKETING PREF/ SEND NOTIFICATION TO CSS ISSUE

17382649

10751 - MISSING ERROR MESSAGE PARAMETER FOR MESSAGE 11118, 12016

17384493

10751 - ACCOUNT CONTEXT MENU AND HYPERLINK IS NOT WORKING ON LEAD PAGE

17385460

87048 - FORMS LIST'S STARTDATETIME ELEMENT SHOULD BE OF STRING TYPE.

17389976

10751 FR SPACE IN LEAD EVENT MO LOG ENTRY FOR ACTUAL MESSAGE SENT CAN BE IGNORED

17390957

COPY OF 17367060 - METAINFO MISSING FOR 'CILLARSL'

17393002

87044 - FR ITEMS OR BUDGET MANAGEMENT AND BILLING

17394196

87040 - THE ID SERVICE TASK TYPE <INPUT ID> IS INVALID.

17395826

BUSINESS OBJECT C1-RATESCHEDULEV2 SET "ALLOW NEW" CAUSES CMA TO NOT APPLY IMPORT

17399162

87048 - WX-FORMSMGMT RETURNS SERVICE TASK TYPES NOT RELATED TO INPUT FORM TYPE

17399214

87040 - UNABLE TO UPDATE THE DAYS BEFORE DUE FIELD FOR BILL DUE NOTIFICATION

17404666

MOD 10751 - LEAD QUERY BY INITIATIVE AND STATUS NOT WORKING

17408385

87040 - INCONSISTENT DISPLAY OF DELIVERY DETAILS USING OLD BO

17410190

87040 - CHANGES TO C1-VALNOTTTY FOR MARKETING PREFERENCES

17410596

87045 - CHANGES TO C1-PPBNTFCSS FOR MARKETING PREFERENCES

17413288

87048 - USER NOT GETTING POPULATED IN COMMENTS SECTION

17426898

CCB240_APDATA5.SQL BLUEPRINT UPGRADE SCRIPT HAS ISSUES WITH SUBSTR

17430828

COPY OF 17426901 - UPGRADE SCRIPT (13483058_RS1.SQL) ADDED FOR BUG-13483058 HAS

17431474

COPY OF 17431301 - REMOVE REDEFINITION PACKAGE CALL FROM ALL CCB BLUEPRINT RELEA

17432559

87048 - FORMS LIST: NAVIGATION WITH DATE RANGE FILTER NOT WORKING

17434033

87029 - ED CHANGE DEFAULT OVERRIDE ADDRESS AND PHONE INFO

17438355

DB ISSUES: MISSING PK AND TABLE FIELDS HAVING NULLABLE MD BUT ARE NOT NULL IN DB

17444558

10751 - ADD CHECK FOR MASTER CONFIG BO EXISTENCE TO MARKET PREF AND CSS LE ALGOS

17452992

11762 - REMOVE TRAILING SPACES ON OBJ_PROPERTY_NAME

17458561

ISSUE ON CCB V24010 PATCH PROCESSING

17460363

ORACLE UTILITIES CUSTOMER CARE AND BILLING V2.4.0.1.0 RELEASE

17464124

10751 LEAD STATUS DESCR IS NOT DISPLAYED ON SALES REP PORTAL

17466615

CMA IMPORT - FK VIOLATION ON WRITE OFF EVENT TYPE ON NON-REQUIRED FIELDS

17468331

11762 - MIG PLAN UI MAP AND BUS SVC IS MISSING ON MIG REQ C1-COPYCONTROLTABLES

17473257

11762 CMA - ADD SELECTION CRITERIA ON MIGRATION REQUEST INSTRUCTIONS

17477898

F1-FLUSH NOT FLUSHING CCB INSTALLATION OPTIONS

17578624

SUPPORT ORACLE DATABASE 12C FOR CCB 2.4.0.1.0

18283080

MICRO FOCUS SERVER EXPRESS 5.1 WRAPPACK 8

Bugs Fixed in Version 2.4.0.0

Bug Fix

Description

6088824

SR# AOVC-1158# CASE INFO HAS THE EXTRA SPACE WHEN THE INFORMATION IS EXTRACTED B

6088830

SR# AOVC-181# WRITE OFF CONTROL ALGORITHMS

6091131

ONLY 9 COPIES OF BILL ARE ALLOWED. SOME CUSTOMERS REQUIRE MORE.

6430717

WPTG_TBT:APPS:ABBS:Q/A101387:UNAPPROVED ABBREVIATIONS IN CI_MD_FLD_L.XLF

7121102

WPTG_TBT:APPS:INTXT:Q&A114477:INCOMPREHENSIBLE MESSAGE IN CI_MD_FLD_L.XLF

7521603

SERVICE XML FILES FOR COBOL SERVICES WITH BASE FIELD METADATA - ARE WRONG

8247783

UNCATEGORIZED SKIP SA REASON ON BILL SEGMENT PAGE MAINTENANCE

8771902

TO DO FACT AND TO DO ENTRY DIMENSION NOT ABLE TO RUN MULTITHREADED

8918402

2 NOTIFICATION NAVIGATION OPTIONS ARE CONFIGURED INCORRECTLY.

9125932

RI ERRORS IN BASE OWNED SYSTEM DATA

9545816

MOVE MONITOR ALGORITHM C1-TRN-DF-NS TO FW.

9586092

BIG DECIMAL DIVIDE AND MULIPLY METHOD NOT USING CONTEXT

9592284

BILL MAINTENANCE OBJECT: SERVICE DOES NOT HAVE MAPPING FOR CI_BILL_MSG_PRM

9808524

MISSING ENTRY IN CI_NAV_OPT_L

9842171

WARNING DIALOG INCONSISTENT FOR CHANGES TO FREEZABLE ADJUSTMENT

9850261

DEPRECATION - ANNOUNCED IN 2.3.0 RELEASE NOTES

9866191

ACTION ZONES SHOULD USE FW DSS

9880805

THE WSDL FOR THE XAI SERVICE CONTAINS TWO SCHEMAS REFERED TO THE SAME NAME

9955845

V2300072; MEDIUM; V2.3 USE OF RULE HINT IN ORACLE 10G

10020432

MATCH EVENT MAINTENANCE PROGRAM - SLOW PERFORMANCE IN CIPFMVTR - SQL S-CHKRI02

10032070

COPY OF 9824342 - VALUE ADDED TO CUSTOMIZABLE LOOKUP CAUSES VALIDATION ERROR IN

10039885

REMOVE HINT TO DO FULL SCAN ON CI_FT FROM BATCH BCGSNAP

10080156

COPY OF 9835760 - CIPFMEVN CURSOR S-SAAMT NOT BEING CLOSED PROPERLY UPON OPEN MA

10090949

WPTG_TBT:GBU:CONCAT:Q&A172928:INCOMPLETE STRING:CCB-CCB-2.3.1-D2

10097625

COPY OF 9954364 - ERROR CALLING CILBBLLP PAGE SERVICE

10122248

NUMBER OF ROWS IN THE _L TABLE DOES NOT MATCH THE NUMBER OF ROWS IN THE MAIN TAB

10126346

CHARACTERISTIC IN PAYMENT UPLOAD STAGING

10157260

COMMA IN CURRENT CREDIT RATING IN CUSTOMER INFORMATION ZONE INCONSISTENCY

10239744

CCB ALLOWS TENDER WITH PAYMENTS OF DIFFERENT CURRENCIES IN A PARTICULAR SCENARIO

10313980

TWO DIFFERENT MESSAGES HAS THE SAME TEXT.

10363579

COPY OF 10363546 - SUPPORT 10 KEYS ON THE FK VALIDATION SUMMARY AND DETAIL UIS

10402770

BATCH "CL-APPCH" IS "ENDED" BUT THE BATCH RUN TREE STATUS IS "IN PROGRESS"

10625519

PREMISE 'TREND AREA' NOT BEING SET TO DEFAULT VALUE DURING ORDER CREATION

10647402

CONVERT PAYMENT EVENT INFO ROUTINE INTO AN ALGORITHM

11064724

PROGRAMS USING PREPAREDSTAMENT MUST CLOSE() THE STATEMENT IN A FINALLY{} BLOCK

11073591

COPY OF 13852349 - GETDECIMALVALUE() IN INPUTREDEFINEHELPER MUST NOT ADD SIZE

11074680

COMPLETE BUTTON IS BEING ENABLED IN BILL MAIN PAGE WITHOUT DOING ANY TRANSACTION

11666727

VARC FK CHARACTERISTIC NOT FOUND (COBOL) - PORT ETM FIX

11680631

DEPRECATE CILXCXSP SERVICE XML

11691584

ADD PORTAL TO VARIOUS PAGES

11729460

INCORRECT ERROR MESSAGE IS RETURNED WHEN ALGORITHM PARAMETER IS INCORRECT

11776394

BILL SEGMENT NOT CREATING CORRECTLY USING A % VALUE - PREVENTING BILLING

11819276

DATA DIFFERENCE PK FIELD IS TOO SHORT

11854287

COPY OF 10322558 - SELECTION OF SERVICE POINT FOR SEVERANCE PROCESS

11869210

{INFO} 2.3.1 INITIAL TO DEMO COMPARE

12328275

AN EXCEPTION IS THROWN WHEN INVALID SA ID IS ENTERED IN ADJUSTMENT UPLOAD

12330833

STATISTICAL AMOUNT COLUMN - CHANGE FORMAT

12362926

ADDED / CHANGED INDEXES

12543711

INCORRECT HANDLING OF COBOL PAGE SECURITY- CIPZSVCN

12583021

INCREASE FIELD LENGTH OF CI_ADJ_APREQ.PYMNT_ID

12587462

COPY OF 12617450 - RECEIVABLES AGING - TOTAL ARREARS CALCULATED BY THIS REPORT A

12626592

MOD 11747 MATH SQ RULE, SQ RULE PROCESSING SET TO ALWAYS, NOT ALWAYS PROCESSED.

12645737

COPY OF 10261733 - CONVERSION TEMPLATES FOR KEY GENERATION AND INSERTION HA

12647541

PERFORMANCE ISSUES POST BUG 12313595 - C1-RECTD EXTRACT PROCES RUNNING LONG

12729407

COPY OF 12658692 - METERREADESTIMATIONUSINGLASTYEARBILLSEGMENTSERVICE IS NOT WOR

12733896

CSS2 - ISSUE 18 - BILLING HISTORY SORTING

12735317

COPY OF 12670907 - CSS2 - ISSUE 34 - WX-NOTIF IS STUCK IN "STARTED" STATUS

12736634

COPY OF 12614950 - FOD BATCH JOB NEEDS TO CONSIDER WORK DAYS

12737556

ROW-DEFAULT-FOR-FLG - INCONSISTENT LENGTH IN VARIOUS COBOL PROGRAMS

12749675

COPY OF 12670907 - CSS2 - ISSUE 44 - SERVICE CHARGES S/B DSIPLAY AS SERVICE TYPE

12753654

COPY OF 12670907 - CSS2 - ISSUE 46 - UNABLE TO RETRIEVE MAILING AND PHONE INFO

12756545

RATE CHECK WITH BILL SEGMENTS, INPUT SQS ARE TAKEN AS NEGATIVE

12758274

COPY OF 12670907 - CSS2 - ISSUE 40 - ADD SPACE AFTER THE METER READ INFO STRING

12758348

COPY OF 12670907 - CSS2 - ISSUE 41 - SEPARATE 5 MD FIELDS FOR VERIFICATION FIELD

12762007

COPY OF 12760084 - TO DO ROLE SEARCH IN 'ORDER - HOLD CONFIRMATION' SHOWS ALL RO

12766807

COPY OF 12670907 - CSS2 - ISSUE 43 - PROBLEM IS IN 'WX-USGCHRGDT' SERVICE SCR

12773995

COPY OF 12670907 - CSS2 - ISSUE 47 - UPDATE OF NO. OF DAYS BEFORE DUE DATE

12776357

COPY OF 12670907 - CSS2 - ISSUE 35 - RATE PLAN DID NOT DISPLAY ELIGIBLE BILLS

12776512

COPY OF 12670907 - CSS2 - ISSUE 37 - RATE COMPARE NOT USING CORRECT RS

12776544

COPY OF 12670907 - CSS2 - ISSUE 42 - RATE COMPARE RESULTS BAD WITH RATE BREAK

12781391

COPY OF 12635043 - DEFECT #2138 - NO ERROR IF PAYMENT TENDER CONTROL ID IS BLANK

12784214

COPY OF 12670907 - CSS2 - ISSUE 49 - UNABLE TO UPDATE MAILING & PHONE INFO

12784238

COPY OF 12670907 - CSS2 - ISSUE 52 - ERROR WX-NOTIFYLATEPAYTASK - TOT AMT IS 0

12784277

COPY OF 12670907 - CSS2 - ISSUE 50 - DISABLED CHECKBOX IN BILLING NOTIFICATION

12784400

COPY OF 12670907 - CSS2 - ISSUE 38 - DESC S/B BELOW ON SELF-SERVICE TASK TYPE

12784571

COPY OF 12670907 - CSS2 - ISSUE 39 - REMOVE SPACE AFTER EVERY FIELD ON SELF-SERV

12797644

COPY OF 12797637 - ADD INSERT AND DELETE COUNTS TO THE CONTROL FILE

12808217

COPY OF 12720943 - CANNOT DELETE A METER AND METER CONFIGURATION

12813435

UPDATE OF OVERRIDE DTTM MANUALLY CODED IN SA OVERRIDE CONTRACT OPTION ROW MAINT

12822822

SYNC REQUEST INITIAL LOAD BATCH PROGRAM EXECUTION STRATEGY CHANGE

12848579

COPY OF 12600514 - FA CANCEL (PIP TO CCB) SHOULD ACCEPT FA UPLOAD REMARKS AND PR

12858755

11686 MIGRATE F1-SYNRQALRT FROM F1 TO C1

12861415

COPY OF 12861408 - ENHANCE ADDRESS EXTRACT FOR BI

12861681

COPY OF 12634168 - DUPLICATE FA CHARACTERISTICS CREATED DURING FACOMPL PROCESSIN

12861964

COPY OF 12861348 - CSS - CHANGE OF APPROACH TO CONFIGURE AND DERIVE TASK TYPES A

12866384

COPY OF 12859086 - USAGE BILLING W/O MONITOR THROWS NPE DURING BILL COMPLETION

12875669

COPY OF 12860480 - CC&B OUBI ETL EXTRACTS C1-PAYTND & C1-CSCNT - MULTIPLE ROWS R

12880162

COPY OF 10263502 - BI PUBLISHER 11 AND CCB 2.4.0

12890048

PAY SEGMENT FREEZE WARNING - INCORRECT SQL CONDITION

12904593

COPY OF 12902887 - PATCH 12652266 DID NOT SOLVE ISSUE WITH MESSAGE CATEGORY AND

12917534

COPY OF 12779262 - C1-PEPL1 BATCH JOB SOMETIMES FAIL WITH ORA-00060: DEADLOCK DE

12917553

COPY OF 11707424 - C1-PEPL2 TAKES 50% LONGER ON V2X SQL W/ HIGH LOGICAL REA

12923246

COPY OF 12915307 - PROBLEMS WITH CREATING CORRECTION NOTE FOR ACCOUNT

12945527

COPY OF 11939832 - SUMMARY ACCOUNTS AND USAGE REQUESTS

12945577

IN USAGEREQUESTUPDATE_IMPL PROGRAM USE FW MO API INSTEAD OF BS F1-RETRIEVEMOOPTI

12953174

COPY OF 12821248 - DEFAULT-BUS-DT-SW NOT SET

12955321

COPY OF 12654036 - CSS2 - 87014 - CLIENT ERROR IS DISPLAYED WHEN INVALID VALUES

12963887

COPY OF 12639598 - MUP2 CREATING DUPLICATE METER READS

12963937

COPY OF 12614490 - DEFAULT CASE CHARACTERISTICS ARE NOT CREATED BY CASECREATOR

12963957

COPY OF 12394755 - SET PROCESS NOT FINDING THE PROPER ENTRY ON FA TYPE PROFILE

12963966

COPY OF 12562600 - SYSTEM ERROR WHEN STOPPING ACCT WITH LLORD REVERSION IF AUDIT

12971527

C1-ACAMT AND C1-UPDPT SHOULD IMPLEMENT THREAD ITERATION STRATEGY

12977175

COPY OF 12673990 - FEATURE CONFIGURATION ACCESS (CILTWSDP) IS REQUIRED TO AFFECT

12977202

COPY OF 12732175 - PREMISE INFORMATION ZONE DOES NOT BUILD

12977210

COPY OF 12746920 - ERROR OCCURS WHEN THE RATE COMPONENT BEING COPIED HAS A CHARA

12977225

COPY OF 12859724 - ERROR WHEN CM JAVA ADJUSTMENT FT CREATION ALGORITHM CALLS CIP

12983885

COPY OF 12586511 - DUPLICATE EXTERNAL NUMBERS IN DOCUMENT NUMBERING

12989099

ERRORS IN COBOL COMPILE

12993123

CCB-SBL - COPY OF 12796815 - MASTER BUG FOR CCB-SIEBEL INTEGRATION

12993177

COPY OF 12660308 - ALLOWS DELETION OF CURRENTLY USED OVERDUE PROCESS TEMPLATE

12993183

COPY OF 12665312 - CIPOASTP QUERY TAKES LONGER THAN IT SHOULD.

12993189

COPY OF 12679773 - DEVICE TEST ERROR MESSAGE PARAMETERS NOT POPULATED

12993201

COPY OF 12683094 - CONVERSION PROGRAMS NOT AVAILABLE

12993243

COPY OF 12732385 - OPTIONAL COLUMN CAMPAIGN QUESTION WITH NO RESPONSE CAUSES ERR

12993261

COPY OF 12756471 - SWITCHING SERVICE ERRORS OUT WHEN EXISTING SA OF SAME SERVICE

12993273

COPY OF 12774448 - BILL SEGMENT FREEZE/CANCEL ALGORITHMS ARE NOT BEING EXECUTED

12993276

COPY OF 12779835 - INCOMPLETE ADJUSTMENT DOES NOT DISPLAY AMOUNT IN DASHBOARD FI

12993279

COPY OF 12790379 - CUSTOMER INFORMATION ZONE NOT SHOWING ALL CUSTOMER CONTACTS

12993286

COPY OF 12834736 - DEBIT MEMO ISSUED WHEN MAKE A REGULAR CYCLE BILL WITH CORRECT

12993289

COPY OF 12835365 - C1-USGDF THROWING ERROR MSG 6, 25624 ON CLOSING BSEGS

12993292

COPY OF 12847650 - BILLING DOES NOT EXIT ITERATION LOOP WHEN BILLABLE CHARGE BSE

12993296

COPY OF 12865979 - PROBLEM WITH CONSUMPTION SHOWN IN METER READ AFTER ROLLBACK

12993301

COPY OF 12959771 - CSS2 - 87013 - INCORRECT FAX NUMBER IN CCB BILL ROUTE TYPE

13000466

COPY OF 12969199 - PROBLEM WITH QUERY EXPERIENCING HIGH GC BUFFER BUSY.

13001373

FW - DEFAULT FLAG FIELD INVALID ERROR WHEN ENTERING VALUES IN AUTOPAY SOURCE TYP

13004689

FW - ERRORS ON RATE COMPONENT

13008562

ID TYPE - ID FORMAT VALIDATION ALGORITHM C1-WEBID WORKS AMBIGUOUSLY.

13010328

COPY OF 12999534 - PERFORMACE DEGRADATION AT BILL COMPLETION WITH APPLY TAXATION

13011208

FW - SERVER ERROR DISPLAYED WHEN NAVIGATING TO LETTER TEMPLATE PAGE

13016042

FW - MISSING LABELS IN FT

13016070

COPY OF BUG 12986361 - TIDY BALANCES JOB DOES NOT ALLOW LUMPING OF OLDEST ARREAR

13016447

FW - WRONG ALIGNMENT OF NON CIS UI TENDER ROW

13017021

FW - SERVER ERROR NAVIGATING TO WF PROCESS LINK

13025883

80038 - COPY OF 13020659 - SEND PREVIOUS USAGE REQUEST ID ON MDM USAGE REQUEST

13051996

FW - JSCRIPT ERROR ON PAYMENT PORTAL UI MAP

13058151

COPY OF 13041757 - ONLINE BILLING FAILS FOR BILL DETERMINANT SA

13062845

RE-ORG OF CCB DEV PACKAGES PROJECT

13066535

COPY OF 13035555 - PAYMENT TRANSFER OVERRIDES CANCELED PAYMENT MATCH TYPE/VALUE

13071700

COPY OF 13027307 - CSS2 - MASTER BUG FOR CCB POST RELEASE ISSUES PREREQ 12784167

13071762

COPY OF 12853107 - ERROR ENCOUNTERED WHEN RUNNING BATCH EXTPER WITH SERVICE SCRI

13071769

COPY OF 12680819 - V2301121;HIGH;CONFIGLAB: V2.3 REQUEST FOR PERL LOG FILES, HIG

13073544

COPY OF 13004282 - PAYMENT(S) FIELD NOT UPDATED CORRECTLY WHEN PAYMENT AMOUNT IS

13079745

FA UPLOAD PAGE WORKED BY DESCRIPTION IS NOT DISPLAYING

13079844

COPY OF 13061944 - XAI SERVICE CILXRQRP NEEDS TO BE JAVA BACKED, REWRITE CIPXRQR

13079954

80041 - SUPPORT USAGE REQUEST BASED CONSUMPTION FOR SUB-SAS

13082270

MESSAGE 6,13725 SHOWS AMOUNTS WITHOUT CURRENCY SYMBOL

13082826

WPTG_TBT:GBU:CNTXT:Q&A192490 - 1:INCORRECT WORDING IN STRING:CCB-CCB-2.3.1SP-D1

13089032

BUFFER BUSY WAITS IN BATCH BILLING

13097605

COPY OF 13097602 - CCB-MDM2: 80039 - SCALAR METER READ SYNC FROM CCB TO MDM

13113019

COPY OF 12965243 - CANCELLED BILL SEGMENTS WITH ZERO VALUE DO NOT REACTIVATE CLO

13114634

WPTG_TBT:GBU:CNTXT:Q&A 193251 - 1:WORD MISSING IN STRING:CCB-CCB-2.3.1SP-D1

13257780

COPY OF 13091206 - CANNOT INSERT CASE CHARACTERISTICS NUMBERFORMATEXCEPTION

13259054

COPY OF 13258363 - F1-SYNRQ FOR METER CONFIG WILL CRASH IF METER MANAGEMENT FC I

13262965

COPY OF 13262900 - CCB-MDM2 USAGE INTERVAL DATE TIME CALCULATION ISSUE

13321525

WSS MASTER CONFIGURATION BO SHOULD REFERENCE A NEW APPLICATION SERVICE

13322136

MOD 10108 - ADDRESS VALIDATION

13325103

COPY OF 11901395 - TD-FAUPL DOES NOT COMPLETE OPEN TO DO'S WHERE THE ERROR HAS B

13325786

COPY OF 13078295 - XAI INBOUND SERVICE EXTRACTFAINFO IS NOT PICKING UP THE ARREA

13325815

COPY OF 8773326 - BILL DATE IN BILL GRAPH ON CONTROL CENTRAL NOT DISPLAYED BASED

13325822

COPY OF 12976901 - V2301144;MEDIUM;CONFIGLAB: V2.3 EXISTENCE CHECK USING A SELEC

13325832

COPY OF 13025589 - ACCESS IS RESTRICTED TO THE USER THAT ESTABLISHED A TENDER CO

13325841

COPY OF 13096297 - BI 2.4 IT 3: D_TD_TYPE EXTRACTS FAILED WITH UNIQUE KEY VIOLAT

13345839

SERVICE QUANTITY VALUE IN THE HOW TO USE (SP) FIELD FOR CCB-MDM INTEGRATION

13355374

CMPS AND ARCH .BAT SCRIPTS INCLUDED WITH ENVSETUP.EXE FLIP FLOP -S AND -R PARAMS

13361403

COPY OF 13257031 - V230113 INCORRECT MESSAGE GENERATED BY THE CONFIGLAB PROCESS

13366092

COPY OF 12981726 - WPM GENERATING REFUNDS WHEN NOT ALL SAS HAVE A CLOSING BILL S

13392319

CHANGE OWNER FLAG ON SOME ELEMETS RELATED TO SYNC REQUEST

13398048

WPTG_TBT:GBU:CNTXT:Q&A195199 - 2:INCORRECT WORDING:CCB-CCB-2.3.1SP-D1

13447630

COPY OF 12568037 - V00951 CONFIGLAB: V2.3, CM_COPDB - DELETE DURING DB PROCESS M

13465211

COPY OF 13454404 - USAGE REQUEST - INVALID USAGE REQUEST USED TO GENERATE BILL S

13471621

COPY OF 13072843 - WRITE OFF DEBT TRANSFER ALGO TRANSFERRED MONEY TO SA WITH BLA

13515856

COPY OF 13515799 - AUTO PAY SOURCE CODE AND PAYOR ACCOUNT ID DEFAULTING PROBLEM

13520851

COPY OF 13108037 - COLLECTION LIMIT REACHED ON FA EXTRACT FOR COLLECTION PREM-G

13526189

CONVERT INBOUND SERVICES AND SCHEMAS TO CM

13539780

COPY OF 13533642 - DEGREE DAY SEARCH NOT RETURNING ALL AVAILABLE ROWS FOR A GIVE

13539804

COPY OF 13538956 - DOCUMENT NUMBER FIELD SIZE 14 ON BILL SEARCH SHORTER THAN DOC

13560238

COPY OF 13491319 - PREMISE HISTORY LIST NOT DISPLAYING PENDING STOP AND PENDING

13564663

COPY OF 13548179 - OFF CYCLE BILL GENERATOR INTERNAL SERVER ERROR WHEN LINKED AD

13572703

CONTROL TABLES - PHYSICAL BO'S

13573013

COPY OF 13061052 - WPTG_TBT:GBU:CNTXT:Q&A192243 - 1:INCORRECT WORDING IN STRING:

13577450

DB PROCESS DESCRIPTION CONTAINS 'CORDAPTIX' NAME, PLEASE REMOVE

13578826

COPY OF 13554176 - PREMISE ZONE DOES NOT REFLECT EXPECTED NEXT METER READ

13583037

COPY OF 13580035 - TENDER SOURCE COLUMN IS MISSING IN THE TENDER CONTROL S

13596985

COPY OF 10221853 - CSP-1582 - EO MBR SA W/ZERO BALANCE STOPPED, SHOULD BE CLOSED

13601526

COPY OF BUG 13529304 - CORRECTED READ INITIATED REBILLS FAILS TO BE FROZEN/COMPL

13607151

COPY OF BUG 13388445 - BS THAT CREATES/UPDATES AN ACCOUNT AUTOPAY RECORD SHOULD

13620700

COPY OF BUG 13586941 - METER REPLICATOR INSERTING SPACE IN BADGE NBR

13620995

COPY OF BUG 13554427 - USE SCHEDULE BILLING OPTION ISSUE

13631591

WPTG_TBT:GBU:CNTXT:Q&A199035 -33:BILL/BILLABLE CHARGE:CC&B 2.3 & 2.3.1

13642765

COPY OF 13058253 - SUPPORT USAGE REQUEST BASED CONSUMPTION FOR SUB-SAS

13648182

COPY OF 13648179 - UPDATE SYSTEM DATA DESCRIPTION: BATCH CONTROL, BUSINESS SERVI

13653117

COPY OF 12985358 - FIX FOR BUG 12587339 - C1-RECTD EXTRACT PROCES RUNNING LONG W

13683042

COPY OF 12665500 - ERROR RAISED WHEN ADDING A PAYMENT EVENT BECAUSE WE DON'T HAV

13683054

COPY OF 13015052 - ORA-01722 DURING EXECUTION OF CL-APPCH

13683061

COPY OF 13082331 - INCORRECT BADGE NUMBER LENGTH IN METER READ UPLOAD STAGING SE

13683065

COPY OF 13103720 - THE DESCRIPTION FOR THE ERROR WHEN PAYMENT TENDER CONTROL ID

13683069

COPY OF 13350344 - ALWAYS CHANGE ACCT DATE FREEZE OPTION NOT WORKING FOR ADJ WIT

13683073

COPY OF 13384221 - FAILED TO RETRIEVE THE ALGORITHM OF DB PROCESS INSTRUCTION

13697999

COPY OF 13386701 - ERROR IS ENCOUNTERED WHEN TRYING TO UPDATE SERVICE AGREEMENT

13698005

COPY OF 13397202 - [CCB 2.3.1] : CHANGE OF BEHAVIOR OF THE MODULE CIPZNMFN

13698016

COPY OF 13402489 - CIPRQCHX (CONSUMPTION HISTORY SQ ALGORITHM) ISSUE

13698025

COPY OF 13403947 - BAD PERFORMANCE ON METER READ SEARCH SCREENS (A.O. ON SP METE

13698062

COPY OF 13420344 - CRE-DTTM FIELD INVALID IN CREDIT AND COLLECTION PORTAL ZONE

13698069

COPY OF 13431953 - CIPQTDEN RAISES AN ACTION INVALID 5,201 ERROR WHEN CALLED WIT

13698072

COPY OF 13453285 - BSEG EXCEPTION IF RATE BREAK ON FIRST DAY OF BILL PERIOD

13698074

COPY OF 13464490 - ISSUES IN CCB 2.3.1 BI DEMO EXTRACTS FORMAT

13698076

COPY OF 13476433 - WFPRINIT OVERRIDES ERROR MESS CAT FROM CM WF PROCESS CRITERIA

13698078

COPY OF 13481574 - NEED TO PREVENT DEFAULTING ON SP TYPE CHANGE (SMART METER ROL

13698080

COPY OF 13489543 - CREATE SERVICE TO INVOKE CAMPAIGN ELIGIBILITY ALGORITHMS

13698082

COPY OF 13499777 - SASP BATCH PROGRAM: CIPCSAPB - S_ACCT SQL MISSING FETCH FIELD

13698088

COPY OF 13534270 - WRAP DISPLAY STATEMENTS IN CIPRRTVN PROGRAM

13698091

COPY OF 13568593 - CSS - SELF-SERVICE TASK PORTAL - UNABLE TO ADD

13698095

COPY OF 13572232 - START/STOP ERASES ADDRESS INFO WHEN BILL ROUTE ON ACCOUNT'S P

13698098

COPY OF 13609345 - WHEN SA ACTIVATES CHANGES IN START/STOP ADDRESS REVERT TO OLD

13698104

COPY OF 13612659 - BILLED CONSUMPTION ZONE DISPLAYS MULTIPLE GRAPH FOR EACH BILL

13698109

COPY OF 13613649 - REQUEST TO INCREASE BATCH BILLING LIMIT OF OPEN BILL CYCLES T

13698114

COPY OF 13621895 - BASE SASP BATCH PROCESS IS MISSING THE DRILL KEY SA ID

13698116

COPY OF 13631516 - CSS: ADD METER READ MESSAGE

13705133

COPY OF 13093081 - FIX CHAR TYPE UI TO ALLOW CM CHAR VALUE

13720650

SERVICE TASK TYPE MAINTENANCE CHANGES

13729704

COPY OF 13497115 - {INFO} RATE COMPNT PROPERTIES NOT DEFAULTED IF BILL CALC LIN

13767464

[FW420] CCB 240 PREDEV COMPILATION ERRORS

13777537

COPY OF 13609986 - PASS GEO CODES ON QUERY FOR APPOINTMENTS

13785094

CREATE BUSINESS COMPONENT FOR COBOLNUMBERFORMATWRAPPER

13785111

CREATE BUSINESS COMPONENT FOR COBOLDATETIMEWRAPPER

13789812

RETRIEVAL OF CHAR AND AUTOPAY COLL FOR ACCOUNT IS IN INCORRECT ORDER

13790271

RELATED FK CHARS FOR MO LOG ENTRIES ARE HARD CODED ON THE ZONE PARAMETER

13815295

MAKE SURE CM-INPUTCHARACTERISTICSGEOCODESCOLLECTION.XML IS UPGRADE SAFE IN 2.4

13819802

{INFO}INFORMATION ON DASHBOARD DOES NOT MATCH

13826616

ADD INDEX ON FIELD COLL_PROC_ID ON TABLE CI_SEV_PROC

13849078

INCREASE THE COLUMN LENGTH EXT_REFERENCE_ID FROM 30 TO 36

13855554

COPY OF 13771989 - DUPLICATING PAYMENT EVENT UPLOAD STAGING THROWS AN ERROR

13855561

COPY OF 12968674 - BILLING RUNS SLOW - LICENSE CHECK WHEN RETRIEVING SYS DTTM

13855575

COPY OF 12882319 - IB-SPDB QUERY CAUSING DEGRADING PERFORMANCE

13855581

COPY OF 13403269 - PRODUCT CATALOG (CCB-SBL) - NEW ORDER SERVICE

13855587

COPY OF 13505760 - CONFIGLAB: BILL FACTOR VALUE - DELETE MISSING RI VALIDATION

13855596

COPY OF 13611755 - 80037 MWM - CCB ACTIVITY COMPLETION INTEGRATION

13855601

COPY OF 13635441 - CAMPAIGN COMPLETION ERROR WHEN THE USER HAS ONLY "INQUIRE" AC

13855606

COPY OF 13645856 - PERSON'S LANGUAGE NOT PASSED INTO BUILD DESCRIPTION (SUBSTITU

13855608

COPY OF 13650984 - ZERO-SUPPRESSION FOR %Q BILL DISPLAY FIELD NOT WORKING FOR ZE

13855618

COPY OF 13652578 - CSS201 - CCB ENHANCEMENTS REQUIRED FOR SELF-SERVICE 2.0.1

13855619

COPY OF 13688494 - PRINT OPTION IN THE BASE REPORTS

13855624

COPY OF 13690812 - GENERATE NEW PAGE DRIVER FOR UOM BASED ON UPDATED TEMPLATE

13855629

COPY OF 13711132 - C1-FTGL EXTRACT HAS MISSING FREEZE_DT AND USERID AND

13855633

COPY OF 13717676 - READ DATES SHOULD BE SAME FOR ALL THE REGISTERS OF ALL THE SP

13855637

COPY OF 13718206 - DEPOSIT NOT CALCULATING CORRECTLY ON ACCOUNTS WITH MULTIPLE P

13855641

COPY OF 13718487 - SA STOPPED MID MONTH AFTER USAGE REQUEST SENT TO MDM FOR ENTI

13855647

COPY OF 13723710 - ORDER'S PREMISE FIELD "TREND AREA" IS NOT AUTO POPULATED

13855652

COPY OF 13728396 - SYSTEM ERROR WITH CM JAVA INSTALLATION OPTIONS OVERRIDE PRORA

13855653

COPY OF 13738693 - PERSON PHONES GRID NOT SHOWING FORMAT WHEN ALGO HAS MULT EFFE

13855656

COPY OF 13781037 - ADD SA CREATION RULE TASK TYPE VALIDATION ALGORITHM

13855658

COPY OF 13809420 - BALANCE CONTROL DISPLAYS THE RECORDS IRRESPECTIVE OF CIS DIVI

13873438

CHANGE C1-OUTBOUNDMESSAGE DA WITH F1-OUTBOUND MESSAGE DA

13874889

COPY OF 13789758 - CSS201 - SETUP BILLING NOTIFICATION PREFERENCES REFERENCE ID

13898535

11748 CREDIT CARD DATA SECURITY T COPY BOOK CHANGES

13900414

MISSING SOME LOOKUP VALUES FOR F1_SYNC_REQ_DISCARD_RSN_FLG

13913044

DELETE DUPLICATE CONSTRAINTS

13921555

COPY OF 13901473 - WPM BATCH HAS SQL ERRORS FOR ACCOUNTS WITH MULTI SITES

13921564

COPY OF 13866985 - BILLING PROCESS CHANGE AFTER APPLYING CCB 2.3.1 SP4 (PATCH 12

13921571

COPY OF 13721419 - VALUES LIKE 99999999999.9999999 DO NOT FIT INTO FORMATS LIKE

13921576

COPY OF 13687859 - FACOMPL PROCESSES RECORDS IN AN INCORRECT ORDER

13921605

COPY OF 12839645 - CONFIGLAB: NEXT BATCH NUMBER NOT BEING UPDATED CORRECTLY DURI

13921621

COPY OF 13511366 - CCB C1-BNBAS BATCH DEADLOCK

13934313

NEED INDEX ON BASE TABLE CI_INTV_DATA_SET

13945423

COPY OF 13874096 - METER READ MO AUDIT ALGORITHMS NOT EXECUTED DURING BATCH PROC

13953187

11349 CONFIGURABLE EXTRACTS

13960666

COPY OF 8312561 - FILE NAME PATH IS TRUNCATED IN LTRPRT BATCH JOB

13963590

MOD 11747 - V2 RATE SCHEDULE DUPLICATE OPENS ORIGINAL RATE SCHEDULE AFTER SAVE

13963597

MOD 11747 - V1 RATE SCHEDULE DUPLICATE DOES NOT INCLUDE RATE VERSIONS

13963675

MOD 11747 - CALCULATION GROUP INFO ON CUSTOM SEARCH NOT DISPLAYED

13963711

MOD 11747 - INCORRECT VALIDATION ENCOUNTERED WHEN CREATING/DELETING SUMMARY RULE

13963729

MOD 11747 - SOME SECTIONS ARE NOT BEING COLLAPSED IN SUMMARY RULE DISPLAY

13963759

MOD 11747 - APPLY-TO RULE DISPLAY/MAINTENANCE MAP ISSUES

13963805

MOD 11747 - APPLY TO RULE SEASONAL VALIDATION IS NOT WORKING

13964694

MOD 11747 - ERRORS ENCOUNTERED WHEN CREATING A FLAT CHARGE RULE

13964861

MOD 11747 - CALCULATE FINAL VALUES DISPLAY MAP SECTIONS NOT COLLAPSING

13968304

MOD 11747 - CALC LINE CATEGORY TYPE MAINTENANCE MAP ISSUES

13968557

MOD 11747 - CALCULATION LINE CATEGORY TYPE LIST IS CASE-SENSITIVE

13969692

MOD 11747 - LIST HAS 2 REFERENCES WITH THE SAME KEYS [].

13969864

MOD 11747 - UNABLE TO SAVE CALC RULE ELIGIBILITY CRITERIA

13969990

MOD 11747 - SORT CALCULATION RULES LIST BY EXECUTION SEQUENCE

13973350

MOD 11747 - CALC LINE CATEGORY VALUES DROPDOWN

13973504

MOD 11747 - SEASONAL DETAILS ARE DISPLAYED WHEN SEASONAL IS BLANK

13973893

MOD 11747 - MATH MAINTENANCE/DISPLAY MAPS' ISSUES

13974245

MOD 11747 - DIVIDE BY 0 ON CALCULATEFINALVALUEALGCOMP TRACE

13975019

MOD 11747 - DISTRIBUTION CODE/ REVENUE CLASS DISTRIBUTION MISSED VALIDATION

13979055

MOD 11747 - CALC LINE CATEGORY LIST'S FILTER SHOULD NOT INCLUDE CHARACTERISTICS

13981138

COPY OF 13925345 - MRRA DOES NOT CREATE EXCEPTION RECORDS FOR ALL REMARK ERRORS

13999483

MOD 11747 - V1 RATE SCHEDULE DUPLICATE DOES NOT INCLUDE CHILD LISTS

14007932

COPY OF 13894431 - CUSTOMER NAME FOR FIELD ACTIVITY IS NOT PROPERLY PASSED TO FW

14007951

COPY OF 13936320 - NEGATIVE SQ LOSES NEGATIVE SIGN WITH JAVA OVERRIDE PRORATION

14009595

MOD 11747 - RATE SCHEDULE BILL MESSAGE DISPLAYS ERROR WHEN END DATE BLANK

14013858

COPY OF 13985328 - CONCURRENCY ERROR DURING RUNNING LATEPYMT BATCH IN CCB 2.3.1

14017606

11231 4000 CHARACTERS IN COMMENT FIELD NOT ACCEPTED

14017653

11231 UNABLE TO IMPORT FIELD ACTIVITY WSDL TO SOAP UI

14019566

MAKE XT233S1 INDEX UNIQUE ON CI_INTV_DATA_SET

14020779

11740 - ENCOUNTERED GETELEMENTBYID() IS NULL ERROR FOR TOU MAP ID QUERY

14020793

11740-"SHOW LASTEST 100 TOU MAP DATA" NOT DISPALYED ON TOU MAP DATA LIST ZONE

14020798

11740-ERROR NOT DISPLAYED ON TOU MAP DATA MAINTENANCE UI MAP WHEN TOU IS INVALID

14022830

11740-MONITOR PROCESS IS MISSING FROM STATUS ACTIVE OF BO C1-TOUMAP

14027088

COPY OF 14004432 - 80037:EXCHANGE METER WITH CHANGE METER DATA FA THROWING "CO

14032890

BILLSEGMENT COBOL DATA MAPPER THROWS ENTITY NOT FOUND ERROR DURING REGEN

14033663

MOD 11747 - RATE SCHEDULE ADD - PRESENTS UI TO SELECT BO - NOT EXPECTED

14034230

MOD 11747 - RATE SCHED MO OPTION TYPE VALUE MISSING SEARCH BUTTON

14034547

COPY OF 13956314 - RETIRED METERS SYNC ISSUE

14034560

COPY OF 13956630 - ADD XSL TO REMOVE ENVELOPE OF MDM RESPONSE MESSAGE

14036717

COPY OF 13403624 - BUDGET BILLING RECURRING CHARGE CONFUSION

14038521

MOD 11747 - HISTORIC PERIODS AND START/END MONTH/DAY ARE ALL REQUIRED

14038913

MISSING FK REF FOR MO OPTIONS

14043215

COPY OF 14029726 - SORTING FUNCTION REQUIRED ON CUSTOMER CONTACT TYPE PAGE'S POP

14045778

MISSING $#LEXC ON ZSQLN COPYBOOK DEFINITION

14049715

MOD 11747 - INCORRECT PARAMETER SUBSTITUTION ON ERROR MESSAGE (4, 11612)

14050431

MOD 11747 - RATE SCHEDULE UI MAP NOT CONSISTENT WITH ED PLUS FIELD LENGTH ISSUES

14050895

MOD 11747 - JAVASCRIPT FUNCTION DISABLEELEMENT DOES NOT DISABLE DROPDOWNS

14051942

MOD 11747 - DUPLICATING A CALCULATION GROUP NAVIGATES TO A BLANK PAGE

14053420

COPY OF 13998538 - CSS2 - CSS PAYMENT ISSUE

14053424

COPY OF 14021161 - SYNC REQ PRE-PROC ALGOS SHOULD HANDLE DELETE AND CAN BE CALLE

14054604

MOD 11747 - ERROR WHEN THE "MISSING VALUE ACTION" VALUE IS "SKIP" OR "CONTINUE"

14054746

MOD 11670 - PAGE IS HANGING WHEN SETTING "OR SELECT FUNCTIONS" VALUE TO BLANK

14055975

11231- XAI REQUEST SUBMISSION WITH ADD ACTION RETURNS A RESPONSE WITHOUT DESCRLO

14060127

MESSAGE WINDOW IS HANGING

14060959

MOD 11670 - RATE CHECK RESULT PAGE ISSUES

14061878

11556 - INTERNAL SERVER ERROR RETURNED

14068254

ADJUSTMENT CLOB DATA AREA IS SAVED IN XML COMPACTED FORMAT

14069077

CCB-SBL: UNABLE TO SAVE AUTOPAY WITH NO EXPIRE DATE

14069125

CCB-SBL: UNABLE TO DELETE CONTACT WITH PERSONADDRESSOVERRIDE

14073421

INTRODUCE A PRE-PROCESSING ALGORITHM IN CCB THAT POPULATES THE SOURCESYSTEM

14073541

11740- OVERRIDE TOU MAP TEMPLATE'S SPI IS NOT USED WHEN GENERATING TOU MAP DATA

14077009

MOD 11747 - POST-PROCESSING CALC GROUP FOR TAXES NOT CREATING SEP BSEG HEADER

14078773

11740-ERROR MESSAGE STILL DISPLAY WHEN SELECTING A VALID TOU.

14079383

00000 - PERSON FILTER DISPLAYS MORE THAN 50 ROWS OF SEARCH RESULTS

14080027

00000 - MULTIPLE CUSTOM SEARCH ZONE DISPLAY MORE THAN 50 ROW OF SEARCH RESULTS

14081747

MOD 11747 - SP JAVA ERROR "NOT A NUMBER: 150" FOR CALCULATE SERVICE QUANTITY C R

14081909

10412 PPB IT - TRANSFER DEBT TO PPB MAP TITLE IS WRONG

14081935

10412 PPB IT - CHECK PPB'S SA STATUS - NO NEED FOR LAST STEP TO TERMINATE

14081970

10412 PPB IT - DELETE UNUSED FIELDS

14082000

10412 PPB IT - TRANSFER DEBT TO PPB - ERRORS AND WARNING NOT SHOWN IN THE MAP

14082049

10412 PPB IT - CREATE PREPAY BILLER - VALIDATE THAT THE SERVICE TASK TYPE PARM

14082068

10412 PPB IT - DELETING A BILL SEGMENT DOES NOT UPDATE PPBS

14083133

10412 PPB IT - ARREARS DATE OF THE PPB REQUEST FUND ADJUSTMENT'S FT NOT SET

14084043

11740-WHEN TOU MAP IS DELETED, THE PAGE STILL DISPLAY&TABS ARE STILL AVAILABLE

14087772

POSTAL DEFAULTING ON UI MAP

14094765

CANNOT DELETE A REGISTER

14098902

10412 PPB IT - DETERMINE TOPUP ALGORITHM NEEDS TO ADD MO LOG FOR FUND REQUESTS

14098934

MOD 11747 - ERROR "DECIMAL POSITIONS FIELD MISSING"

14099357

10412 PPB IT - DETERMINE TOPUP ALGORITHM - NO NEED TO SET CURR BAL TO ZERO

14102393

MOD 11747 - SQ ENTRY ADDED EVENTHOUGH UOM/TOU/SQI DOESN'T MATCH

14103456

COPY OF 13972525 - RENAME "SIEBEL INTEGRATION..." OBJECTS TO "SERVICE TASK..."

14104161

MOD 11747 - JAVA ERROR FOR CALCULATE SERVICE QUANTITY - HISTORICAL QUANTITY CALC

14109515

MOD 11747 - ERROR FOR CALCULATE SERVICE QUANTITY - CALC LINE CALCULATION RULE

14109987

MOD 11747 - CALCULATION GROUP UI ISSUES

14110039

10412 PPB IT - NON-CYCLICAL USAGE NOT TRANSITIONED AFTER BS IS GENERATED

14110294

COPY OF 13951641 - ACCOUNT INFO BUTTON (ALT+I) CAUSES CCB SCREEN TO "FLICKER"

14110392

10412 PPB IT - DETERMINE TOPUP ALGORITHM - FUND REQ ADJ CREATED WITH ZERO AMOUNT

14115095

MOD 11747 - ERROR "IS REQUIRED" IS DISPLAYED FOR ITEM TYPE CALCULATION RULE

14115629

MOD 11747 - CALC LINE CATEGORY TYPE UI ISSUES

14119635

COPY OF 13991444 - INCORRECT ACCOUNTING DATE SET BY BATCH PROGRAM PERFORMING PAY

14119649

COPY OF 13829822 - WRITE OFF BY DIST CODES CREATES ADJUSTMENTS WITH INCORRECT AM

14119653

COPY OF 14004249 - CSS201 - CCB ENHANCEMENTS POST RELEASE CHANGES

14119658

COPY OF 14021661 - RUNNING C1-BLCMP WITH LOCALIZATION IS TAKING 10 TIMES AS LON

14119664

COPY OF 14034109 - DISPLAY MAPS NAVIGATING TO SERVICE TASK TYPE PORTAL TWICE

14120451

10412 PPB IT - PPB TASK TYPE MAPS LAYOUT CHANGES

14121833

MOD 11747 - BASE AMOUNT IS NOT PROPERLY REFLECTED FOR 'APPLY TO' RULES

14122849

C1FACOMPLETIONEXTSYSSTRUCT ELEMENT NAME WAS MODIFIED

14125065

COPY OF BUG 13952900 - BS/ZONE THAT RETRIEVES LIST OF SERVICE TASK TYPES SHOULD

14128989

MOD 11747 - CALC RULE 'APPLY TO DETAIL' UI ISSUES (RETEST FW BUILD 021 14524888)

14129137

10412 PPB IT - DET BS SCHED ALGO - NON-BD SA NOT PASSED TO DET CONSUMP PERIOD

14134611

10126346: CUSTOMER ID IS TRUNCATED IN PAYMENT UPLOAD STAGING

14136617

COPY OF 13994834 - ERROR IN LETTER EXTRACT BATCH

14136623

COPY OF 14113214 - ERROR IN CIPMUP2B (MUP2 BATCH JOB)

14137368

MOD 11747 - CHAR VALUE PARAMETER IS MISSING ON ERROR MESSAGE

14138219

COPY OF 13974310 - ISSUE WITH PAYMENT TRANSFER

14138508

11739-NEM FT GL CREATION ALGORITHM SHOULD SUMMARIZE FTS BASED ON DIST CODE

14138510

MOD 11747 - SA ID PARAMETER SUBSTITUTED WITH PREMISE ID

14139076

SEARCH BY EXTERNAL ID DOESN'T WORK IF BOTH EXTERNAL ID AND SERVICE TASK TYPE CO

14142670

11739-NEM FT GL COBOLWRAPPER NOT INITIALIZING FT COLLECTION

14148781

MOD 11747 - SEASONAL PERIOD VALIDATION ERROR

14148802

MOD 11747 - CALCULATE SERVICE QUANTITY UI ISSUES

14152785

COPY OF 13931147 - SYSTEM ERROR AT BILL COMPLETION FOR ACCOUNTS WITH ADJUSTMENTS

14154539

COPY OF 13365573 - OM02246;HIGH;BATCH JOB FOD DOESN'T USE VERSION# TO IDENTIFY O

14154974

MOD 11747 - INCORRECT CALCULATION FOR PRORATE METHOD "ACCOUNTING DATE"

14155063

CONVERSION: UPDATE INSERTION TEMPLATE TO HANDLE SRCH_CHAR_VAL FIELDS PROPERLY

14160139

10412 - NULLPOINTER ON DET PREPAY BAL ALGO FOR INCOMPLETE PAYOFF RELIEF INFO

14164504

MOD 11747 - ITEM TYPE CALC RULE - REQUIRE AT LEAST ONE ITEM TYPE ENTRY

14165100

MOD 11747 RATE ENGINE - FUNCTIONAL REVIEW

14165118

MOD 11670 RATE CHECK - FUNCTIONAL REVIEW

14165853

MOD 11747 - SQ - MULTIPLE SEASON ROWS HANG SYSTEM (RETEST FW BUILD 021 14524888)

14170489

10412 - DUPLICATE, UNUSED FIELDS

14171185

MOD 11747 - STEPPED SQ UI MAP ISSUES (RETEST FW BUILD 021 14524888)

14173567

PREMISE PAGE DISPLAYING LABELS IN BOLD/DIFFERENT SIZE UNLIKE OTHER FIELDS

14174158

ERRORS ENCOUNTERED WHEN ADDING ISSUING CENTER

14174828

COPY OF 14164043 - DE MINIMIS RULE NOT WORKING WITH USAGE REQUEST BILLING

14175318

11747 - DELETE LOOKUP TOU_CALC_FNC_FLG

14176283

MOD 11747 - MINIMUM / MAXIMUM / FLAT CHARGE UI ISSUES

14179610

10412 - ERROR NO BILL CYCLE SCHEDULE

14181994

COPY OF 12387737 - ASSET INVENTORY RELATED SCREEN ARE RESPONDING VERY SLOW

14183005

10412 FR - ADJ TYPE SEARCH SHOULD RETRIEVE AND DISPLAY THE FIRST 50 RECORDS

14187295

10412 - CONVERT PPB TASK TYPE TO USE UI HINTS

14187465

COPY OF 14176652 - NEW LOCATION HISTORY IS ALLOWED TO BE CREATED EVEN IF ITEM IS

14187803

MOD 11747 - STEP MULTIPLIER ALGORITHM IS NOT EXECUTED

14188183

10412 FR - ADD VALIDATION THAT PAYOFF RELIEF INFO MUST BE COMPLETE ON PPB TYPE

14188273

10412 FR - SECOND RESULT COLUMN OF SERVICE TASK SEARCH SHOULD BE "SERVICE TASK"

14188321

COPY OF 14126157 - WRONG PAYMENT DISTRIBUTION BY CIPPDOIX ALGORITHM

14188600

COPY OF BUG 14140091 - FIELD ACTIVTY CREATED FROM METER READER REMARK, FA COMMEN

14189379

COPY OF 14102557 - BATCH JOB SEC NOT WORKING PROPERLY

14190259

SA SYNC REQUEST IS NOT INSTANTIATED WHEN CREATING NEW SERVICE AGREEMENT.

14193820

MOD 11747 - MATH CALC RULE UI ISSUES (RETEST FW BUILD 021 14524888)

14194888

WSS DEPRECATED. REMOVE WEB SELF SERVICE TAB

14195139

10412 FR - PPB TYPE REQUIRED FIELD VALIDATION IN WRONG ORDER IN MAINT MAP

14195375

SYNCHRONIZED SYNC REQUEST DOES NOT TRANSITION RELATED USAGE TO AWAITING BILL DET

14196104

ORDER PAGE/MAIN TAB - DISPLAY ERROR 500 - INTERNAL SERVER ERROR

14198282

COPY BUG FOR BUG 13624381 - MDM VERSION 1 - CORRECTED READ REBILL FUNCTION

14198615

BILL SEGMENT NOT SHOWING EXPANDED MESSAGE WITH SUBSTITUTION PARM

14200369

MOD 11747 - CALC RULE SEARCH DOES NOT HAVE VALUES IN QUERY OPTION DROPDOWN

14200461

MOD 11747 - CONTEXT MENU RATE CHECK FROM RATE VER DOES NOT DEFAULTRATE SCHEDULE

14202824

MOD 80041 - SUB BILL SEGEMENT GO TO BUTTON TO NAVIGATE TO MASTER BILL SEGMENT)

14208358

MOD 80041 - SUB BILL SEGMENT FOR NON BD IS NOT CREATED WHEN MASTER SA HAVE A COM

14209190

MOD 11747 - STEP SUMMARY IS STILL BEING CREATED EVEN IF CREATE OPTION IS BLANK

14211701

COPY OF 13835992 - CCB - BILLING BATCH SLOWS WAY DOWN - HIGH CPU

14211704

MOD 11747 - SUM AND TAXES NOT CALCULATED WHEN CALC AMT GREATER THAN THE MIN AMT

14212217

MOD 11747 - JAVA NULL POINTER EXCEPTION FOR MINIMUM CHARGE

14214004

MOD 80041 - THE GENERATE, DELETE AND FREEZE BUTTONS ARE ENABLED FOR BD SUB BILL

14222101

ADD CCB-SPECIFIC F1_SVC_TASK_CL_FLG LOOKUP VALUES BACK TO CCB

14222929

COPY OF 14185824 - MAX LIMIT REACH AT C1-BNBAS BATCH

14223335

USAGE REQUEST - DATE BREAK LIST

14224527

11697-SERVICE POINT ID & FA TYPE FIELDS ARE DISABLED IN FA PAGE

14225885

MOD 80041 - AFTER DELETING A PENDING BILL I'M GETTING AN ERROR WHEN ADD NEW BILL

14227143

11739-NEM ADMIN MAP TO USE UI HINTS

14229203

ERROR SENDING SYNC REQUEST ACKNOWLEDGEMENT DUE TO THE NEWLY ADDED STATUS REASON

14230891

MOD 80041 - INVALID PLUG-IN SCRIPT 'ZZ-TDTEST' ASSOCIATED TO 'C1-CORRRDTD' ALGOR

14233032

COPY OF 6091173 - SR# CCB-1210# ADDING NEW ITEM TYPE WITH UOM OKWH ITEM DESCRIP

14233725

COPY OF 14141901 - PUPL PERFORMANCE DEGRADATION WITH ROW LOCK

14239914

MOD 11747 - PRORATION WAS NOT CALCULATED FOR MAXIMUM CHARGE

14247146

FA UPLOAD STAGE STEPS: INDENTATION NOT THE SAME FOR ALL STEPS

14247193

11697-MISSING 'TASK TYPE' TITLE IN THE SR MASTER CONFIGURATION

14256905

COPY OF 14054504 - PERFORMANCE ISSUE IN C1-BNBAS

14256998

MOD 11747 - "PRINT" CHECK BOX IS NOT CHECKED ON CALC LINE FOR FLAT CHARGE

14257943

COPY OF 14247195 - JAVA-ENABLEMENT OF CIPPUPFN ROUTINE

14262863

COPY OF 14254156 - BI : REQUEST FOR BPA SCRIPT TO NAVIGATE TO CCB FROM BI

14267196

MOD 80041 - THE CYCLICAL BILLING USAGE REQUEST STOPS AT AWAITING DATA SYNC EVEN

14270537

COPY OF 14183773 - INVALID UOM/INTERVAL REGISTER TYPE COMBINATION ON METER CONFI

14274342

MOD 11747 - RATE CONTEXT MENU (+) ADD FUNCTIONS INCORRECTLY NAVIGATE TO CTR CNTL

14274895

10412 - DUPLICATE RELATED TRANSACTION BO DISPLAYED IN PPB TASK TYPE DISPLAY MAP

14275677

GRAY BAR UNDER 'FIELD 1' AND ‘FIELD 2’ IN SELF-SERVICE INTEG DISPLAY MAP

14276541

ERROR MESSAGE DISPLAYED ON CALCULATION GROUP ADD PAGE ON FUNC2 ENV

14277722

MOD 80041 - THE USAGE RELATED TO SUB BILL SEGMENT IS BEING DELETED WHEN SENDING

14293236

CORRECT JAVA NAME OF LOOKUP FIELD CORRECTED READ CANCEL REASON

14293618

COPY OF 14278951 - BATCH CODE : CIPHFGLB - PERFORMANCE ISSUE

14301438

MOD 11747 - BSEG ERROR CALC SQ CALC RULE (RETEST FW BUILD 021 14524888)

14304603

COPY OF 14154544 - UNABLE TO DELETE SA SP RECORD, SQL ERROR ENCOUNTERED

14304617

COPY OF 14062084 - SYNC REQUEST SEARCH BY NAME DOES NOT WORK IF THE ACCOUNT ONLY

14304620

COPY OF 14077961 - VIEW ACCOUNT LIST - NO CHECKING OF FILTER VALUE

14304627

COPY OF 14085775 - MISSING SCHEMA CONSTANT LOOKUP

14304655

COPY OF 14103240 - TO DO RELATED CHARS FOR SYNC REQUESTS ARE NOT BEING CREATED

14304670

COPY OF 14109327 - FAVORITE LINK - ACCOUNT INFORMATION DOES NOT WORK CORRECTLY

14304678

COPY OF 14118681 - INCORRECT SP TYPE IS BEING DISPLAYED IN THE ERROR MESSAGE UPO

14304681

COPY OF 14136838 - CHANGE CONTROL CENTRAL SEARCH FACTOR TO A CONFIGURABLE LIMIT

14310023

THE VALUE DISPLAYED IN CUSTOMER MAINTENANCE TASK IS THE SERVICE TASK ID INSTEAD

14312863

COPY OF 14155533 - BILL GENERATE INTO COMPLETE IF A MR FAILED HIGH-LOW CHECK WHI

14321169

SA REL ID GO TO BUTTON IN BILL SEGMENT PAGE IS NOT WORKING. AN ERROR "THE SERVER

14321928

11697-SERVICE REQUEST INTEGRATION 'INCORRECT ERROR MESSAGE'

14327635

MOD 80041 - BATCH JOB C1-USGDF RETURNS JAVA.LANG.NULLPOINTEREXCEPTION

14329340

APPOINTMENT PAGE DOES NOT PROPERLY DISPLAY THE FA W/O APPOINTMENTS RECORD AND T

14331132

COPY OF 13542278 - CCB COBOL QUERY PERFORMANCE ISSUE DUE TO RECOMMENDED CHANGES

14333706

REGENERATE ROW MAINTENANCE TO PASS "BEFORE" AND "AFTER" COPYBOOKS

14333949

ALERT ALGO "RETRIEVE OPEN SERVICE TASKS" CAUSING REDUNDANT SERVICE TASK ALERTS

14347716

MOD 80041 - NON-BD SUB BILL SEGMENT IS DELETED IF AN ERROR IS ENCOUNTERED ON BIL

14348656

10412 - BILL ID IS MISSING EXPERIENCED ON CLOSING BILL SEGMENT

14350829

MOD 11747 - ROUNDING ISSUE ON SEASONAL CALC LINES PROATE METHOD: PRORATE

14351138

FA PAGE DOES NOT HIDE/SHOW FIELDS CORRECTLY

14351413

COPY OF 14330437 - RETRY UNTIL DATE TIME IS REQUIRED FOR ONLINE BILL WITH USE SC

14351632

COPY OF 14185848 - V2.3.1 SF-SUNAPP-30.US.ORACLE.COM:8700/SPL/ SEARCH ON CTRL CE

14352210

11697-MINOR ISSUES(SR QUERY,FA SR PORTAL,FA IN CANCEL STATUS)

14356711

COPY OF 14355948 - CCB ALLOWS UPDATES ON FA CHARACTERISTICS FOR COMPLETED FAS

14356838

COPY OF 14348543 - USAGE REQUEST ALLOWS ESTIMATES EVEN THOUGH SA DOES NOT

14357775

INITIAL INSTALL ISSUES

14361343

PARAMETER COPYBOOK 1 IS NULL ERROR

14361580

MOD 11747 - SEASONAL STEPPED SQ ANNUAL RATES NOT WORKING AS EXPECTED

14361744

MOVE USAGE SKIP INFO TO THE PARENT USAGE BO TO CATER FOR BOTH ONLINE AND BATCH

14362534

MOD 11670 - NO VERTICAL SCROLL FOR CALC LINES THAN HAVE MORE THAN ONE CALC HEADE

14367164

MOD 11747 - "BILLABLE SERVICE QUANTITY" VALUE IS "0" FOR CALC RULE "ITEM TYPE"

14367226

MOD 11747 - "DISTRIBUTION CODE" VALUE IS BLANK FOR CALC RULE "ITEM TYPE"

14368382

CSS2 - ERROR IS ENCOUNTERED IN WXGETSELFSERVICELABELS SERVICE

14368803

MOD 11747 - PREFERRED DISCOUNT NOT APPLIED ON V2 RATE SCHEDULE

14372970

NEM FR ISSUES

14374422

11697-FA SYNC REQUEST -CANCEL REASON IS MISSING

14377924

COPY OF 14308750 - PROBLEM DUE TO THE CHANGE OF THE MODULE CIPFGLEB INTRODUCED B

14379539

11697 - UNABLE TO ADD SERVICE TASK TYPE - UI MAP SCHEMA ERROR THROWN

14389394

MOD 11747 - JAVA NULL POINTER EXCEPTION FOR APPLY TO

14389569

MOD 11747 - TAX EXEMPT "T" VALUE IS NOT DISPLAYED ON DESCR ON BILL FOR APPLY TO

14390689

10412 - TRANSFER DEBT UI MAP SA INFO LEFT JUSTIFIED

14394866

MOD 11670 - TWO SAME ERROR MESSAGES IS DISPLAYED ON THE RATE CHECK PAGE

14397645

10412 - PAYMENT AMOUNT FIELD MISSING

14401569

10412 - STILL CREATED PAYMENT TENDER TYPE IS NOT AUTOPAY

14401733

MOD 11747 - CALC FINAL READ RULE DID NOT CALC SQ INITIAL/BILLABLE SQ CORRECTLY

14401959

COPY OF 13994254 - LACK OF WARNING MESSAGE WHEN ACCOUNT'S MAILING PREMISE ID IS

14402712

10412 - NO VALIDATION FOR INVALID SA TYPE IN ALGO TYPE C1-OVPY-PPSA

14405987

DUPLICATE BUS_OBJ_OPT_FLG LOOKUP VALUES FOR EXT SYSTEM AND OUTBOUND MSG TYPE

14407580

COPY OF BUG 14309931 - LATE PAY CHARGE SWITCH IS ON FOR CREDIT NOTE BILLS.

14407623

10412 - UPDATE OF PREPAID SMART METER FLAG DISABLING ADJ TYPE

14458762

COPY OF BUG 14251106 - DOCUMENT NUMBER IS MISSING ON PAY EVENT INFO

14458965

JAVASCRIPT ERROR WHILE MOVING TO CASE TYPE PORTAL FROM TO DO SEARCH PORTAL

14459452

DB PROCESS - OWNER FLAG IS REQUIRED FOR PRIMARY INSTRUCTION

14461709

COPY OF 14011727 - UNABLE TO USE APPLYCM AFTER INSTALLATION CC&B SP4 DUE TO LOOK

14461711

COPY OF 14186168 - BILL OPTION AND ALLOW ESTMATES CHANGES ON OCBG FORCED REBILL

14461716

COPY OF 14389570 - ORDER COMPLETION NEW PREMISE CREATION ISSUE

14463644

COPY OF 14382472 - EXTRACT FILES NAME WRONG IN DEMO 2.3.1 FOR C1-RECTD

14463818

MOD 11747 - WRONG ERROR MESSAGE WHEN TRYING TO CHANGE SERVICE TYPE ON RATE SCHED

14463915

MOD 11747 - SERVER ERROR TRYING TO CHANGE CURRENCY ON V1 RATE SCHEDULE

14466611

SUBMISSION OF REPORTS FROM CCB RETURNS ERROR "FILE DOES NOT BEGIN WITH '%PDF'

14468255

MOD 11747 - ERROR IF MISSING VALUE ACTION VALUE IS SKIP CALC SERVICE QNT HISTORI

14468856

MOD 11747 - VALIDATION ON CHANGE OF SUBRATE LINKED TO PRIMARY NOT WORKING

14469301

MOD 11747 - ERROR MESSAGES NOT SUBSTITUTING VARIABLES

14471253

THERE ARE SOME ISSUES IN SA CREATION RULE MAINTENANCE UI MAP

14471755

MOD 11747 - ERROR IMPORTING BUNDLES FOR CALC GROUP

14474791

COPY OF 14204124 - TOOL TIPS ON BILL SEGMENT PAGE SHOW # WHEN USER HOVERS OVER T

14474796

10108 - INCONSISTENT DISPLAY OF VALIDATE BUTTON IN ORDER PAGE

14475060

10412 - ERROR IN BATCH F1-STKDF MIN BAL NOTIF EMAIL AND NO EMAIL DEFINED IN PERS

14475372

10412 - BATCH F1-STKDF ERROR MIN BAL NOTIF SMS AND NO SMS IN PERSON

14475670

10108 - ADDRESS VALIDATION NOT WORKING PROPERLY IN STARTSTOP PAGE

14475826

10108 - EXTRA LINE DISPLAYED IN BILL ROUTING PAGE USING IE8 BROWSER

14478968

COPY OF 14462092 - COPY ADJUSTMENT DETAILS ROUTINE DOES NOT COPY ADJUSTMENT CHAR

14489111

COPY OF 14406270 - BILLABLE CHARGE ONE TIME SA CREATED CLOSED WHEN SA CREATION A

14490171

CSS2 - USAGE DETAILS ERRORS

14491036

COPY OF 14489971 - ADD THE ABILITY FOR COBOL TO REMOVE SAVEPOINTS

14493306

CALENDAR ICON ISSUES ON HIDE, DISABLE AND DISPLAY

14496257

COPY OF 14141949 - COLLECTION AGENCY PAID HISTORY RECORD CREATED WHEN WRITE OFF

14496903

10412 - ERROR WHEN TRYING TO UPDATE A PPB WITH DELETED LATEST BILL SEGMENT

14497336

ISSUE IN PRODUCT OFFER SEARCH PAGE - START OPTION DROPDOWN IS NOT CLEARED WHEN

14500281

COPY OF 13993329 -CCB-SBL: UNUSED DA IN SCRIPTS ADDED FOR CCB-SIEBEL INTEGRATION

14500519

MOD 11747 - RATE SCHEDULE ADD UI MAP HYPERLINK TO CLASSIC - V2 RATE ENGINE ONLY

14500602

COPY OF 14493293 - SAVING MR WITHOUT USE ON BILL

14500784

SERVER ERROR ENCOUNTERED ON LOAD OF MATCH TYPE PAGE

14504442

ISSUING CENTER MAINT UI MAP ERROR ON EDIT

14506526

CCB-SBL: CUSTOMER SYNCHRONIZATION:DOES NOT CONTAIN EXCEPTIONINFO IN CCBRESPONSE

14507105

CSS2 - SERVICE CHARGES SHOULD BE DISPLAYED AS SERVICE TYPE

14510243

11743 DIGITAL SIGNATURE FR ISSUES

14510546

CORRECT THE DATA TYPE METADATA OF DOC_ID FIELD FOR TABLE CI_BILL

14520257

COPY OF 14139622 - DISTRIBUTION OF PAYMENTS TO BILLS WITH DISPUTING ITEMS

14520261

COPY OF 14338644 - TRIGGERS IN SOURCE FOR OUBI

14520264

COPY OF 14483132 - DUPLICATE ERROR ON SERVICE ROUTE TRANSFER AS OPPOSED TO WARNI

14520271

COPY OF 14496979 - JAVA ENABLEMENT OF BASE COBOL COMMON ROUTINE CIPCOARN

14520276

COPY OF 14496988 - JAVA ENABLEMENT OF BASE COBOL COMMON ROUTINE CIPCGDCN

14521540

TD-SEVT JOB UPDATES SEVERANCE EVENT VERSION FIELD TO 0

14527533

COPY OF 14523440 - CREATED AND APPROVED ADJUSTMEN, CURRENCY SYMBOL DISPLAYS WRON

14527745

MOD 11747 - INVALID ERROR ON ENTER CALC RULE UI - INPUT SEQUENCE INVALID

14528111

11697-ERROR SCHEMA FIELD GEOVAL (SCHEMA/GEOVAL) HAS AN INVALID DEFAULT FUNCTION

14528519

POSTROUT JOB: SQL ERROR CODE 999999994 OCCURRED IN MODULE CIPBHSTG:XA200 FETCH

14531519

CSS2 - NULLPOINTER EXEPTION ON GETUSAGE - WXUSAGEOVERVIEW

14538138

COPY OF 14352927 - ADJUSTMENTS THAT ARE NOT SWEPT ON TO BILL ARE BEING CAPTURED

14538141

COPY OF 14356225 - BILL COMPLETION VALIDATION ERRORS SHOULD BE TRAPPED AS BILL E

14539451

10412 - SCHEDULED EXTRACT DATE OF THE PAY EVENT TENDER IS INCORRECT

14546822

MOD 11747 - ADJUSTMENT CALC LINE DETAILS NOT DISPLAYING PROPERLY

14547346

STATUS FIELD IS DISABLED WHEN LIFECYCLE ENCOUNTERS ERROR ON THE NEXT PAGE

14547747

REGENERATE CONVERSION PROGRAMS AFFECTED BY TABLE AND TEMPLATE UPDATES

14547975

CLICKING THE HYPERLINK OF ALERT CASE WITH THE SAME TYPE CAUSES ERROR 500

14550979

COPY OF 14550995 - BILL SEARCH CHAR WAS NOT POPULATED DURING BATCH C1-BNBAS

14552372

NPE WHEN RS IS EFFECTIVE AFTER SA START DATE

14553227

10412 FR - MOVE DEFAULT PAYMENT METHOD AND BAL REPLENISHMENT OPTION TO PPB TYPE

14554278

ERROR MESSAGE AND ALIGNMENT ISSUE ON PACKAGE ELIGIBILITY TAB

14557354

10751 - SALES AND MARKETING FOR DSM ENHANCEMENT

14558146

10412 - ERROR WHEN TRYING TO GENERATE BS FOR CANCELED PPB SA

14558734

10412 FR - INEFFICIENCY IN RETRIEVING LATEST BILL SEGMENT

14558935

ORA-00936: MISSING EXPRESSION ON BATCH CIPVSRRV

14559086

COPY OF 14558926 - CORRECT OPEN AND ASSIGNED HOURS OF TO DO EXTRACT FOR BI

14559541

FK VALIDATION ERROR ON CI_BSEG_CALC TABLE WHEN USING RATES V2

14575693

COPY OF BUG 14535058 - UNABLE TO ADD SA CREATION RULE. AN ERROR MESSAGE WILL DIS

14576298

11740 - ERROR DISPLAYED WHEN ADDING CALCULATION RULE

14579464

USING DOC_ID SEARCHING FOR A BILL FAILED DUE TO LACK OF INDEX

14584712

CSS2-ERROR IS ENCOUNTERED WHEN TRYING TO COMPARE RATES IN CSS

14585838

COPY OF BUG 14409431 - [INFO] PERSON IS NOT DISPLAYED IN PERSON TREE IN CONTROL

14589178

DELETE/DEPRECATE C1 ALGORITHMS PORTED TO FW

14589838

INSERTION PROGRAM ISSUES

14590009

MOD 11747 - BATCH BILLING CREATES A BILL SEGMENT WITH NO CALC HEADERS OR LINES

14590276

COPY OF 14526215 - BUG 13718206 CHANGED DEPOSIT CALCULATION FROM PREMISE BASED T

14590680

COPY OF BUG 14520407 - CHANGES TO CUSTOMER CLASS - OVERRIDE DUE DATE ALGORITHM R

14590694

PAYMENT FOR ACCOUNTS WITH DIFF. CUR ERROR IN NCIS PORTAL

14591885

CSS2-UNABLE TO RETRIEVE RATES USING "WXRATEANALYSIS" THRU XAI SUBMISSION

14593876

COPY OF 14222588 - ISSUE WITH DEPOSIT RECOMMENDATION USING TREND CALCULATION

14593882

COPY OF 14513536 - AFTER APPLY FW2.2.SP 15 CCB2.3.1 SP5,C1-ADMOV REPORTING ORA-0

14593889

COPY OF 14561831 - BATCH TD-HILO FAILS WITH MESSAGE MULTIPLE REGISTERS PRIORITY

14594987

MOD 11747 - HISTORIC QUANTITY JAVA NULL POINTER EXCEPTION

14599535

10412 FR - PREPAY BILLER TASK AND TASK TYPE UI LAYOUT CHANGES

14600647

10412 FR - CHANGE DESCRIPTION OF C1-SSTSK CHAR TYPE TO "SERVICE TASK"

14603240

10412 - DUPLICATE FUND REQUEST ADJ CREATED FOR PPB SA IN 1 PERIODIC MONITOR EXEC

14605587

COPY OF 14366834 - LOST CORRECTION READ NOTIFICATIONS IN CCB

14606410

MOD 11747 - HISTORIC QUANTITY CALCULATED INCORRECTLY

14606895

10412 FR - ADD PPB INFO TO THE TRANSFER DEBT AND PPB TASK MAINTENANCE UI MAPS

14606993

10412 FR - CREATE BATCH CONTROL TO MONITOR PENDING AND ACTIVE PPB

14607325

MOD 11747 - NO ERROR MESSAGE IF MEASURES PEAK QUANTITY VALUE SET TO "YES".

14607368

10412 FR - ADD PERSON INFO, EMAIL, AND SMS TO PPB TASK MAP

14607450

HIDE "ACTIONS" ZONE ON THE USAGE REQUEST PORTAL

14608175

CONFIGURING EDGE APPLICATIONS FOR CCB-NMS INTEGRATION( CCB2.4 CERTIFICATION)

14612032

10412 FR - REQUESTED FUND SHOULD BE A WHOLE NUMBER

14613112

10412 FR - XPATH ERROR WHEN TRYING TO TRANSFER DEBT TO PPB

14614184

CCB : INITIAL LOAD BATCH JOB C1-SYNIL NOT WORKING

14616469

COMPARE UTILITY NEEDS TO BE ENHANCED TO USE NEW PASSWORD ENCRYPTION ALGORITHM

14617471

CLOSING BILL SEGMENT END DATE FOR USAGE IS INCORRECT

14620617

11697- FA MO AUDITS ARE NOT TRIGGERED IN BATCH

14621403

10412 & 11739 - VARIABLE 'STATISTICAMOUNT' NOT IN SCOPE ON FREEZING BS

14625146

10412 FR - CHANGE TOOL TIP PPB ALERT TO "GO TO PREPAY BILLER"

14626050

UI XML WITH BAD DISPLAYS OF FIELDS

14629870

MOD 11747 - JAVA NULL POINTER EXCEPTION FOR MATH RULE

14638065

MOD 11747 - NO NODE NAMED "CONDITIONALFORMULALIST" FOR MATH RULE

14641771

WAM-CCB:CREATION OF FA FROM WAM THROWING INVALID DATE FORMAT ERROR

14645521

11739 - UNABLE TO COLLECT TARGET ELEMENT DATA FOR MOVE COMMAND

14646835

10412 FR - ADD DIFFERENT FIELDS FOR MAIN SECTION LABEL OF PPB AND NEM TASK TYPE

14647725

10412 FR - PPB ALERT ALGORITHM CHANGES

14652904

MOD 11747 - JAVA OUT OF MEMORY ERROR FOR MATH RULE

14664629

11349 - TRUNCATED QUOTE DESCRIPTION FOR ONLINE DISPLAY

14664754

11349 - BILL DETAILS OF GAS RELATED BILLS ARE TRUNCATED ON DISPLAY LAYOUT

14669120

COPY OF 14633127 - START/STOP - ADDRESS SOURCE WARNING MESSAGE IS DISPLAYED MULT

14669678

11697-RECON FA NOT CREATED WHEN CUT PROCESS IS CANCELED.

14675021

10412 FR - PPB NOT TRANSITIONED TO INACTIVE AFTER SA WAS CLOSED AN FINAL BILLED

14675218

CI_BILLPR BI PUBLISHER REPORT DOES NOT HAVE THE FIX FOR OLD BUGS 9694249/1021812

14676472

SYSTEM ERROR - WHEN TRYING TO DELETE ADJUSTMENT NOT LINKED TO BILL

14680973

10412 FR - BILL ID MISSING ERROR ENCOUNTERED WHEN TRYING TO REBILL A PPB BS

14684887

COPY OF 14552697 - APPLY TAXATION THRESHOLD PREBILLCOMPLETION ALGORITHM

14686340

MOD 11670 - NEW RATE CHECK RESULTS PAGE ISSUE

14686520

MOD 11747 - HISTORIC QUANTITY WAS NOT CALCULATED WHEN SEASON START /END POPULATE

14686731

MOD 11747 - MATH RULE SYNTAX VALIDATION FOR CONDITIONAL FORMULA IS INCORRECT

14696101

11739 - FR NEM UI CHANGES

14696334

11739 - SYSTEM ERROR UPON TRANSITIONING TUM TO TRUED-UP

14702326

CCB : INITIAL LOAD BATCH JOB C1-NMSIL NOT WORKING

14702978

MOD 11747 - MATH MAINT UI - WRONG ERROR MESSAGE FOR MISSING BILL FACTOR

14703879

JS ERROR ENCOUNTERED DURING LOADING OF ADD CIS PAYMENT UI MAP

14708185

MOD 11747 - BSEG WITH MIN CHARGE NOT WORKING SAME AS RV1

14708844

COPY OF BUG 14685589 - ISSUE WHEN FINAL BILLING ZERO BALANCE LOAN

14711177

11429 MAX BILL THRESHOLD - ALGORITHM USES THE BS PERIOD S/B CONSUMPTION PERIOD

14711636

DIFFERENCE QUERY - RECEIVE ERROR TOO MANY KEY FIELDS SPECIFIED FOR MAINT. OBJECT

14722437

STANDARD MONITOR PROCESS ERROR DEPRECATED

14722896

PAYMENT PORTAL/TEMPLATE DISPLAY ISSUES

14725916

COPY OF 10258686 - BILL PRINT EXTRACT NOT WRITING ENTIRE RECORD

14727092

10412 FR - ADD PPB FINANCIAL HISTORY ZONE THE THE SERVICE TASK PORTAL

14729738

11697 - EXPOSE SP SOURCE STATUS AND DISCON LOCATION WHEN ACTION IS ADD

14731450

SYNC REQUEST COUNT IN ALERT ZONE IS NOT THE SAME AS THE ACTUAL SYNC COUNT.

14733744

COPY OF 14646568 - REALTIME DATA SYNC BETWEEN CCB AND MDM

14734606

10412 FR - PPB TASK DISPLAY MAP'S GOTO SA AND GO TO BS CONTEXT MENUS NOT WORKING

14734681

PERSON NAME BASE IS DEFAULTED INCORRECTLY

14741113

MISUSE OF ORATYPE:FKREF

14741319

COPY OF 14262784 - SQ COLLECTION ISSUE WITH USAGE RESPONSE (MDM 14383949, CCB/MD

14745230

MOD 11670 - ISSUE REQUESTING NEW USAGE

14748550

11349 - SYSTEM ERROR AFTER RUNNING EMLROUT USING XML ALGO

14752192

10412 FR - ADD BILL COMPLETION ALGORITHM TO ADD PPB BILL MESSAGE

14752345

MOD 11747 - CALC LINE NOT CREATED WHEN MATH CALC RULE MISSING INT DA = SKIP

14755318

THE ENDPOINT URL PATTERN FOR C1ADJUSTMENTMAINTENANCE.WSDL

14764318

ISSUES FOUND IN SYNCING NMS CUSTOMER DATA

14764805

MOD 11747 - NO BILL SEGMENT CREATED FOR BILLABLE CHARGE SA

14770981

COMPARE UTILITY ERROR 1024 ON BATCH CI_COCNT

14773386

11739 - TUM TASK DISPLAY MAP'S GOTO ACCT AND GO TO SA CONTEXT MENUS NOT WORKING

14776603

CONFIGLAB - COMPARE UTILITY USING NEW PASSWORD ENCRYPTION ALGO FAILS IN WINDOWS

14780241

11697 FA SYNC AUTO TRANSITION LOGIC IS CAUSING CONCURRENCY ISSUES

14789691

MOD 11747 - FR ITEM 80

14794449

F1-TDCREATE ALG TYPE ADDITIONAL PARAMETERS CAUSING 2.3.1 ALG TO FAIL

14799085

DESCRIPTION UPDATES FROM FR

14800385

ERROR WHEN PRESSING "GET MORE" BUTTON ON SQ DETAILS/CALCULATION/AUDIT USAGE DETA

14804518

10412 FR - ADD PPB BILL SEGMENTS GRAPH

15868412

CCBV2.4 - NMS INTEGRATION CONFIGURATION EXAMPLES

15868422

CCBV2.4 - SIEBEL INTEGRATION CONFIGURATION EXAMPLES

15974294

CONFIGURING CCB 2.4 FOR CCB-MDM V2 INTEGRATION IN DEV (POINT TO NEW INT SERVER)

16020746

UPDATE UPGRADE SCRIPTS TO POPULATE SEARCH CHAR VALUE UP TO 50 CHARS ONLY

16963468

PERFORMANCE ENVIRONMENT STARTUP ISSUE FOR CCB 240 BENCHMARK

Application Framework Fixes

This section lists bugs fixed in Oracle Utilities Application Framework version 4.2.0, including:

•

Bugs Fixed in Version 4.2.0 Service Pack 2

•

Bugs Fixed in Version 4.2.0 Service Pack 1

•

Bugs Fixed in Version 4.2.0.0

Bugs Fixed in Version 4.2.0 Service Pack 2

Bug Fix

Description

7173082

SYSWIDE FK REFERENCE VALITATION (F1-FKVBP) SHOULD NOT ISSUE AN ERROR FOR BLANK BOOLEANS

8276632

SYSWIDE MASKING ISSUE WHEN UPDATING MASKED DATA VIA A SERVICE SCRIPT

8981724

CONFIGTOOL INVOKING A NON-EXISTANT BPA RETURNS A BAD ERROR MESSAGE

9736141

CONFIGTOOL DESCRIPTION FOR ZONE TYPE PARAMETER ROWSTOEXPORT MISLEADING

10275294

BUNDLE FIREFOX: COPYING BUNDLE CONTENT INCLUDES "COLLAPSE NODE"

10424859

CONFIGTOOL SGG- DEFAULT CURRENT DATE/TIME INCORRECT AS IT IS BEING CACHED.

11658900

CONFIGTOOL TEST BUG FOR LONG PFD AUTOGENERATION

11839105

CONFIGTOOL TEST BUG FOR SHORT PFD AUTOGENERATION

12710567

CONFIGTOOL FIREFOX: CLICK ON STATUS WHICH IS IN LIFE CYCLE DISPLAY GETTING ERROR

12901432

BUNDLE FIREFOX: ALWAYS GIVING INVALID FILE TYPE ERROR, EVENTHOUGH IT IS VALID CSV FILE

13577435

ACCESS ADA-MDM: WORKLIST IS NOT PART OF TAB NAVIGATION

13577521

ACCESS ADA-MDM: USING ENTER ON THE EXP/COL, HELP, OR CONTEXT MENU IMAGES DOES NOT WORK

13650842

CONFIGTOOL IN RTL FW ENVIRONMENT, HISTORY MENU IS INCORRECTLY DISPLAYED IN IE BROWSER.

13650896

CONFIGTOOL RTL FW: TEST UI MAP LINK IS NOT AVAILABLE ON MAIN PAGE OF UI MAP IN IE BROWSER

13791802

HELP SPLHELP.HTML SEEMS TO HAVE WRONG LOGIC FOR NON-ENGLISH HELP

13882007

ACCESS ADA: JAWS: ISSUES WITH THE EXPLORER ZONE MENU

13900159

ACCESS ADA-MDM: SLOW RENDERING OF FILTER AREA IN MULTI QUERY ZONES

14074964

CONFIGTOOL UI MAP: IN FF THE ALLIGNMENT OF UI MAP TYPE IS WRONG

14078341

CONFIGTOOL IN FF REMOVE OPTION IS IN DISABLE STATE WHEN ADDING A NEW LOG IN TODO ENTRY PAGE

14246243

CONFIGTOOL SUPPORT OVERRIDE HTML

14325011

CONFIGTOOL COPY OF 14294119 - XHTML UI MAP WITH ORADOWNLOADDATA GETS XSLTRANSFORMER ERROR

14393030

DATABASE MISSING COPY BOOK INFO FOR THE FRAMEWORK OWNED FIELDS

14504020

BUNDLE BUNDLE IMPORT OF ALGORITHM RECEIVED MESSAGE 11002,12902 (ALG VERS REQUIRED)

14511001

MIGASSIST CMA OBJECT FAILING VALIDATION DOESN'T HAVE STATUS APPLIEDERROR

14554243

PORTAL COPY OF 14394716 - GAP IN THE DASHBOARD WHEN HIDING A CONTEXT SENSITIVE ZONE

14599104

SYSWIDE DYNAMIC ANALYSIS : ERROR 500 INTERNAL SERVER ERROR

14641015

TODO COPY OF BUG 14489674 - ADDING CUSTOM ROLE TO OOB TODO IS NOT WORKING

14727652

PORTAL NAVIGATION ISSUES WITH PORTAL ZONES

14740613

SYSWIDE CACHE_FLG NEEDS BE UPDATED FOR FW SYSTEM OWNED TABLES.

14757887

CONFIGTOOL RETURN NUMBER OF UPLOADED DATA FROM CSV

14772887

GEN ENTER KEY NOT WORKING ON MULQRY ZONE RECORD LINKS DISPLAYED NEXT TO CONTEXT MENU

14830103

GEN ADD MORE DESCRIPTION TO OVERRIDE DATE CHARACTERISTIC TYPE

15834880

SYSWIDE SHIFT CALENDAR DOES NOT RENDER DUE TO USER AND LOGIN NAME NOT MATCHING

15835819

TRANSLT MDM PSEUDO TRANSLATION ISSUES

15932706

ACCESS ADA-ODM: COLOR CONTRAST ISSUE IN UI MAP

15967069

SYSWIDE NEED ABILITY TO HIDE SOME SQL ERRORS FROM THE LOGS

15972133

COMMON COPY OF 16398679 SAVE POINT DISPATCHER SERVICE DOES NOT TRAP ALL ERRORS

15992897

CONFIGTOOL ETM: SUPPRESS SYNTAX FOR ENTERING A VALUE ON ADD BUT NOT ON EDIT

15993276

CONFIGTOOL GUI SE: DRAG AND DROP IS NOT FULLY FUNCTIONAL YET, CANNOT MOVE

16019726

CONFIGTOOL COPY BUG 16495223 GUI SE: TREE RENDERING SHOULD SUPPORT COMMENTED OUT

16020110

COMMON MDM: ERR MESSAGE "VALUE TO TOO LONG FOR A FIELD" COUNTS CHARS INSTEAD OF BYTES

16047750

CONFIGTOOL ER 00436 - BO OPTION FOR MAINTENANCE BPA SCRIPT

16065847

PORTAL COPY OF 16046658 - IN PRINTED ZONE TITLE DISPLAYS ZONE MENU AND HELP TEXT WITH Z

16088667

SYSWIDE CHROME: UNABLE TO ADD HIJRI DATES MAPPING IN CHROME BROWSER

16091279

SECURITY ER 00434 - ETM: ENHANCE MASKING CAPABILITY FOR SCHEMA BASED OBJECTS

16092274

ACCESS COPY OF 14222314 ADA: MENUS AND SUBMENUS ARE NOT ACCESSIBLE USING JAWS

16162474

WORKFLOW NO DEFAULTING ON WORKFLOW PROC TEMPLATE DEPENDENT EVENTS DESCRIPTION

16178243

DATABASE IN MO F1-STASKTYPE, TABLES HAVE WRONG CLASSIFICATION

16190631

SYSWIDE 00428 DATA EXPLORER PAGINATION SUPPORT

16191584

SYSWIDE COPY OF BUG 14791127 - CANNOT PURGE RECORDS- CHILD ROWS HAVE REFS TO PARENT

16191724

BATCH COPY OF BUG 15938107 - TRANSITION ERROR ALGORITHM ERROR HANDLING

16191834

UN COPY OF BUG 15882339: SUPPORT COBOL ROW STARTTOADD (SADD) IN JAVA CHANGEHANDLERS

16213996

TRANSLT MDM:INCORRECT WORD ORDER FOR JAPANESE RUNTIME CONCATENATION - COLLAPSE ... ZONE

16219040

SYSWIDE ETM:360 SEARCH QUERIES ON CI_ZONE_PRM NOT USING BIND VARIABLES & TRIM() DISABLES

16238502

CONFIGTOOL IF MULTIPLE ORADISPLAYNONE SPECIFIED IN ORALOAD, ONLY LAST ONE IS EXECUTED

16246003

SYSWIDE GUI SE: HIDE MO FILTER WHEN USER IS EDITING BO SCHEMA

16274027

GEN MDM: DEC=6 MNEMONIC OF ZONE IS NOT FORMATTING DECIMAL VALUES PROPERLY

16275797

SYSWIDE FIREFOX 17 ESR : CERTIFICATION ISSUES ON 4.2.0.1.0

16279612

ENVIRON 00228 INCORRECT ENTRIES FOUND IN CHANGES FOR EAR INDEPENDENCE

16285904

SECURITY ER 00435 - SUPPORT ENCRYPTED FIELDS AS FILTER ON QUERY DATA EXPLORER

16289428

SYSWIDE DYNAMIC CURRENCY SUPPORT IN ZONE FETCHES WRONG VALUES WHEN WE EMPTY VALUES

16293476

SYSWIDE GUI SE: CODE CLEAN UP

16295186

SYSWIDE GUI SE: INCLUDESS SEARCH CAN BE RESTRICTED TO SERVICE SCRIPT ONLY

16295792

CONFIGTOOL JS ERROR WHILE CLICKING CUSTOM SEARCH ICON TWICE

16296571

PORTAL ETM: HYPERLINK USING FK REF NAVIGATES TO BLANK PAGE

16303417

SYSWIDE GUI SE: IMPROVE MAP FIELD SEARCH FILTERS

16313792

SYSWIDE GUI SE: UIHINT PROPERTIES FKREF CONTROL CAN BE CONDITONALLY HIDDEN/DISABLED

16324590

HELP ATTACHMENT SEARCH PORTAL NEEDS NAVIGATION KEY FOR CONTEXTUAL ONLINE HELP

16327744

SYSWIDE GUI SE:REMOVING UI HINT NAMESPACE SHOULD SHOW ERROR MESSAGE IN DESIGN VIEW

16340610

SYS EAR STILL NOT FULY INDEPENDENT

16343425

COMMON VARIOUS COSMETIC ISSUES WITH ATTACHMENTS

16343980

THIRDPTY COPY OF 16343977 - ER FOR MDB TO HANDLE POISON MESSAGES FOR WEBSPHERE MQ.

16344893

BATCH COPY OF 16263038 - SSE BATCH RUNNING FOR LONG PERIOD OF TIME WITHOUT ANY TERMINA

16356307

SYSWIDE COPY OF 16356298 - COPY OF 15922990 - MWM SHIFT CALENDAR DOES NOT RENDER DUE TO

16359969

UIMAP GENERATED MAPS ARE NOT BEING CACHED IMPACT GUI SE

16400205

SYSWIDE 0405 - EMAIL SERVICE AND ATTACHMENTS - COSMETIC ISSUES

16428053

SYSWIDE POP-UP PAGES NO LONGER APPEARING ON CENTER OF PAGE BUT ON UPPER LEFT OF SCREEN

16444128

SYSWIDE GUI SE: CHROME ISSUES

16446898

DATABASE FOREIGN KEY VALIDATION ERRORS IN QA DUE TO FW DATA

16448294

UN COPY OF 16448289 COMMENTS IS NOT SAVE IN ADDING CUSTOMER CONTACT - IN QUICK ADD

16448330

TODO COPY OF 14797345 RELOCATION SAVEPOINT IN F1-TDCREATE

16472842

DATAEXPLOR 00384 PORTAL PERSONALIZATION - ISSUES

16474506

GEO COPY OF 16283266 - ERROR WHEN PERFORMING MULTISEARCH GEOCODING REQUEST

16479302

COMMON COPY OF 16190087 - UNABLE TO SUCCESSFULLY ENABLE REVISION CONTROL FOR SOME OF TH

16479984

BATCH COPY BUG 16374017 - LOS ALWAYS SET TO ERROR WHEN THE TIMED JOBS ARE RUNNING SUCC

16481786

CONFIGTOOL FW: Z1 AND ZZ COMPONENTS IN DEVELOPMENT ENVIRONMENT

16484210

SYSWIDE COPY OF 16437301 - GUI SE: APPENDING GARBAGE CHARACTERS IN 'APPLICATION SECURITY

16484224

SYSWIDE COPY OF 16385299 - GUI SE: ADD SUPPORT FOR NEW UIHINT:ALPHAFORMAT ATTRIBUTE

16484232

SYSWIDE COPY OF 16425774 - GUI SE: ADD "STRING" OPTION TO THE DATATYPE ATTRIBUTE

16488499

CONFIGTOOL COPY OF BUG 16480050 - CCB: HYPERLINK OF FIELDS ARE NOT GENERATED ON THE DISPLAY

16494258

CONFIGTOOL COPY OF 16316995 UIHINT INCLUDEDA IN MAINTENANCE MAP FRAGMENT SCHEMA NOT COLLLEC

16498241

SYSWIDE COPY OF 16489896 - WHEN MANUALLY ALLOCATING THE FA THE CREW SHIFT QUERY ZONE

16500536

BATCH COPY BUG 16497621 - THREADPOOLWORKER FAILS IN WINDOWS ENVIRONMENT

16501703

BATCH COPY OF 14807234 - ERROR IN CIPZSVPN WHEN CREATING A LIST OF SAVEPOINTS

16505281

MIGASSIST COPY OF 16449617 - MIGRATION PLAN/REQUEST PAGES THROWING JAVA SCRIPT ERROR

16510447

BO GUI SE: IMPROVE FIELD SEARCH BY MAINTENANCE OBJECT

16511162

COMMON ALGORITHM VERION SHOULD DISPLAY OWNER

16512194

COMMON COPY OF BUG 16759653 - UNABLE TO ENTER A NEW SET OF ALGORITHM PARAMETERS ON ANY

16523814

MIGASSIST COPY OF 16490438 - NUMBER FORMAT EXCEPTION WHEN RUNNING F1-MGDPR - IMPORT

16523970

MIGASSIST COPY OF 16504198 - UNSUPPORTED OPERATION (TIMESTAMP) WHEN RUNNING F1-MGDPR - EXP

16524561

UN CCB ACCOUNT-BUDGET IS BROKEN AFTER APPLYING BUG 16193071

16525303

CONFIGTOOL COPY OF BUG 16472132 - MAINTENANCE MAPS HAVE TWO TITLES

16529274

REVCTRL 00419 SMART REVISION CONTROL

16532153

CONFIGTOOL GUI SE: MAPLIST IS NOT PROTECTED ON DISPLAYMAP

16533437

GEN COPY OF BUG 14797345 - ODM: RELOCATE SAVEPOINT IN F1-TDCREATE

16537110

CONFIGTOOL NAVIGATION ON ATTACHMENT CREATION

16538167

SYSWIDE COPY BUG 16210577 - LDAP IMPORT ERROR REPORTING AND HANDLING TO 4.2.0

16546972

BATCH SEPARATE SINGLE-SERVER CLUSTERS FOR TESTING

16554890

BATCH RUN/THREADABORTEXCEPTION NOT LOGGED CORRECTLY IN BRT

16565429

CONFIGTOOL COPY OF BUG 15877611: ROWFILTER ON FLATTENED LIST IS ALWAYS RENDERED WHEN USING

16578088

MIGASSIST COPY OF 16552932 - ENTITY ID FIELD SEQUENCE DOES NOT MATCH PK OR TABLE METADATA

16584650

COMMON COPY OF BUG 14594616 - ADD FILE SIZE TO ATTACHMENTS

16584655

COMMON COPY OF BUG 16579180 - ATTACHMENT ISSUES WHEN FW OWNED ATTACHMENTS ARE EXTENDED

16587299

SYSWIDE COPY OF 16520616 - GUI SE: MULTIPLE SCENARIOS FAILING IN SE

16590846

MIGASSIST COPY OF 16586472 - CMA:SQLINTEGRITYCONSTRAINTVIOLATIONEXCEPTION IS COMING AT THE

16594546

CONFIGTOOL GUI SE: NO SUPPORT FOR ATTRIBUTE UIHINT:CAPITALIZE ON SCHEMA EDITOR

16599744

CONFIGTOOL COPY OF 14644644 - INCREASE NUMBER OF USER FILTERS, HIDDEN FILTERS & SQL COLUMNS

16616713

BATCH COPY OF 16616715 - ORA-00001UNIQUE CONSTRAINT F1_TSPACE_ENTRY AT THREAD STARTUP

16617709

RELEASE COPY OF 16545152 - ISSUES WITH CO.SH

16624983

MIGASSIST EXPORT OF CYRILLIC-NAMED BUSINESS SERVICE CAUSES NULL POINTER ERROR

16625647

CONFIGTOOL COPY OF 16396059 - UIHINTS - AVOID PROLIFERATION OF MAINTENACE/DISPLAY SCRIPTS W

16625761

MIGASSIST COPY OF 15880329 - ADD FW MIGRATION PLANS - DROP 1

16636568

MIGASSIST COPY OF 16635023 - NULL POINTER ERROR ON IMPORT/APPLY OF A PLUG-IN SCRIPT

16655659

CONFIGTOOL COPY OF 16212989 : UIHINT: NO AVAILABLE METHOD TO CAPITALIZE

16657578

BATCH COPY OF 16530304 - BATCH TO DO CREATION CREATES DUPLICATE TO DOS AND DOES NOT CL

16659074

RELEASE COPY OF 16215864 - ORS FUNCTIONALITY IS BROKEN BECAUSE OF THREADPOOLWORKER CHANG

16659413

SYSWIDE COPY OF 17458173 MO AUDIT LOGIC CAUSED SYNCS TO BE CREATED IN AN INCORRECT ORDER

16670605

CONFIGTOOL COPY OF BUG 16482296 - ORATYPE DELETEGRIDROW NOT INVOKING ONCLICK JAVASCRIPT ON

16670742

SYSWIDE COPY OF 16580225 - {INFO} HIBERNATECACHEHELPER.FLUSHANDCLEAR(); NOT WORKING ANYM

16672151

GEN EXPOSE ADDRESS ELEMENTS IN ADDRESS GEOCODING PLUG-IN SPOT AND SERVICE

16675541

XAIXAI XAI INBOUND SERVICE WSDL EXPOSES JAVA VALUES FOR LOOKUP BUT DOES NOT ACCEPT ONE

16677648

SYS COPY OF BUG 16431404 - CREATE A BO ALGORITHM ZONE DOES NOT CHECK USER ACCESS T

16681493

MIGASSIST COPY OF 16672791 - CMA CANNOT APPLY BPA SCRIPT

16691278

COMMON COPY OF BUG 16677131 - FILE SIZE IS NOT SHOWN IF THE FILE SIZE IS IN BYTES

16694764

RELEASE COPY BUG FOR 16592440 - XAI SUBMISSION ISSUE ON WINDOWS FOR FW 420 SP1

16699794

CONFIGTOOL COPY OF BUG 16547650 - ZONE DOES NOT RENDER PROPERLY FOR SOURCE=SPECIFIED

16706380

COMMON BO SEARCH ON COMMON ATTACHMENTS DOES NOT RETURN CHILD BO'S

16708886

XAIXAI COPY OF 14523613 - XAI: TIME ZONE CONVERSION PROBLEM

16718517

BATCH COPY BUG 16717970 - INCORRECT IMPLEMENTATION OF BATCH LEVEL OF SERVICE PLUG-IN

16719473

CONFIGTOOL COPY OF BUG 16659790 - ALLOW ABILITY TO RENDER PRE-SCRIPT SCHEMA WHEN EDITING A

16730011

GEN COPY OF BUG 14698961-ETM: ONCHANGE NOT BEING TRIGGERED FROM AN INPUT TEXT

16732498

GEN GUI SE: POPULATE IS="%EFFECTIVEDATE INSTEAD OF IS="%EFFECTIVEDATE() WHEN NO VALU

16734038

RELEASE COPY OF 16568048 - SPL.PROPERTIES CHANGES TO SUPPORT BATCH VIEW FROM SERVER

16742045

CONFIGTOOL COPY OF 16694153 - INFO / QUERY ZONES DO NOT AUTO REFRESH

16743579

CONFIGTOOL COPY OF 16303599 - ERROR 404--NOT FOUND IS THROWN WHEN WE CLICK ON THE HELP

16744001

GEN MWM: ERR DISPLAYED WHEN CLICK ON ?CSV FILE TO UPLOAD? BUTTON TWICE

16744855

BATCH COPY OF 16449924 - TO DOS LINKED TO A BATCH RUN SHOWS THE LATEST BATCH RUN NUMBE

16753871

COMMON COPY OF 14674545 - ETM: ADD OPA REQUEST AND RESPONSE TO LOG FILE

16762676

MIGASSIST COPY OF 16689329 - CMA PERFORMANCE IMPROVEMENTS

16767735

TODO COPY OF BUG 16664523 - DEFAULT CHARACTERISTIC VALUE IS NOT SET WHILE ADDING THE

16771270

RELEASE SERVICE PACK INSTALLATION ALERTS WHEN HOT FIX COPIES ARE NOT PRESENT IN THE SP

16772019

TODO COPY OF BUG 16679656 - SRCH_CHAR_VAL NOT POPULATED ON CI_TD_TYPE_CHAR ABLE

16772958

CONFIGTOOL ODM: UIHINTS : CSV FILE UPLOAD NOT WORKING FOR BO'S WITH UI HINTS

16774281

XAIXAI 234 - INBOUND WEB SERVICE UI AND DEPLOYMENT

16776394

CONFIGTOOL COPY OF BUG 16743893 - ISSUE IN UIHINTS GENERATED DISPLAY/MAINTENANCE PAGE AFTER

16780112

CONFIGTOOL COPY OF 16679063 - GUI SE: INVALID MAXLENGTH IN FLATTENING INFORMATION FIELDS

16780601

SYSWIDE COPY BUG 16670760 - GUI SE: SCHEMA TAB NOT GETTING REFRESHED WHEN OPENING ANOTH

16792355

SYSWIDE COPY OF 16792321 - PREVIOUS SCREEN TITLE CONTINUES TO DISPLAY ABOVE THE NEWLY DI

16792659

MIGASSIST ERROR MESSAGE LIST THE KEYS IN IN-CORRECT ORDER.

16805473

SYSWIDE COPY OF 16671538 - GUI SE: ALLOW DUPLICATE ELEMENT IN SCHEMA DESIGNER FOR TYPE C

16806926

SYSWIDE COPY OF BUG 16806914 - COPY OF BUG 16745968 - ETM:SRCH_CHAR_VAL POPULATED WITH S

16810210

CONFIGTOOL COPY OF BUG 16418659 - UIHINTS - SUPPORT UIHINTS FOR STATE TRANSITION MAPS

16810642

MIGASSIST COPY OF 16802088 - NULL POINTER ERROR ON IMPORT/APPLY

16811214

SYSWIDE DYNAMIC CURRENCY IS NOT WORKING WHEN WE USE CUR=COLUMN NAME OR 'CURRENCY'

16811499

SYSWIDE COPY OF 16675844 - GUI SE: CONDITIONALLY HIDE ELEMENTS ISSUES

16812311

TRANSLT TRANSLATION: BUG TO TRACK THE CODE CHANGES REQUIRED FOR BUG 13334177

16816491

RELEASE COPY OF 16816282 - IN FW_JARS_STRUCTURE.XML THE BASESUPPORT FOLDER SHOULD BE CAM

16816617

CONFIGTOOL COPY OF 17171626 ON ADD DEFAULT VALUE ON THE SCHEMA IS NOT DISPLAYED ON THE UI

16819629

GEN COPY OF BUG 16758539 - BS F1-SMSSEND FAILS IF MESSAGE HAS "<" TRAILING CHARACTER

16821296

UIMAP THE FILTERS ON THE ATTACHMENT QUERY PORTAL ARE CENTERED

16821515

XAIXAI COPY OF 16622223 - PURGE CI_XAI_DWN AND RELATED TABLES

16822481

PORTAL COPY OF 16736533 - BI BUCKET CONFIGURATION RELATED CHANGES FOR MO AND PORTAL - S

16822988

BATCH COPY OF 16806989 - GET CLUSTER INFORMATION BS NOT WORKING IN QA ENVIRONMENT

16823619

BO COPY BUG 16480191 - MODIFY FLATTENED EFFECTIVE DATED ELEMENTS MAINTENANCE

16828901

SYSWIDE ETM: USE LAZY INITIALIZATION TO FETCH ZONE METADATA AND CACHE FOR FIELD HELP

16834157

PORTAL COPY OF 16736533 - BI BUCKET CONFIGURATION RELATED CHANGES FOR MO AND PORTAL - S

16837418

BUNDLE PHYSICAL AND BUNDLING BOS SHOULD NOT BE INSTANTIABLE.

16839543

TODO COPY OF BUG 16622418 - PERF ISSUE ON HOME PAGE FOR ALL USERS CAU

16842190

BATCH COPY OF 16787374 - PROCESS ID IN THE DETAILS GROUP IS 0 WHEREAS IN THE MEMBERS L

16858186

CONFIGTOOL GUI SE: NOT SAVING FLATTENED FIELD CORRECTLY WHEN CHILD TABLE/LIST IS MISSING

16862244

BATCH REMOVE BATCH CONTROLS USED FOR TESTING

16867759

DATABASE COPY OF BUG 17335666 - MDMV2 D1-SMMTR IS SLOW AND LOG FILES USE ALL DISK SPACE

16874369

MIGASSIST COPY OF 16864647 - RUNTIME ERROR SUCH AS "SQL TOO LARGE" CAUSES CMA TO FAIL

16879555

MIGASSIST COPY OF 16874883 - APPLYING IMPORT OF SCRIPT INVOKING A FUNCTION FAILS WITH HIBE

16880375

SYSWIDE COPY OF 17344235 ALLOW 0 FOR REQUIRED NUMERIC NON-SERVICE-BASED FIELDS

16881510

MIGASSIST COPY OF 16850247 - IMPORT/APPLY GIVES SQL ERROR "QUOTED STRING NOT PROPERLY TERM

16885846

TRANSLT CCB_24_FR:2237:UI MAP - SCHEMA TAB TITLE LAYOUT

16886338

MIGASSIST IMPORT ZONES SHOW BO ERROR ABOUT MISSING SCHEMA - NO ROWS DISPLAYED

16886698

DEVTOOLS ARTIFACT GENERATOR GENERATES CODE USING DEPRECATED METHODS

16887380

MIGASSIST COPY OF 16850309 - IMPORT/APPLY THROWS ILLEGALARGUMENTEXCEPTION: ILLEGAL GROUP R

16888958

CONFIGTOOL COPY OF 16838338 - GUI SE: NOT ALLOWING ENOUGH SPACE IN VALUE REFERENCE FIELD

16889192

DATABASE COPY OF BUG 16889187 - COPY OF BUG 14844844 - FIELD SC_USER_CHAR.SRCH_

16905016

COMMON COPY OF 16871726: RAISE A NUMBER TO A DECIMAL POWER NOT WORKING AS EXPECTED

16911910

SECURITY COPY OF BUG 16904379 - CLOB FIELD IS NOT UPDATED WHEN ANY ELEMENT PRESENT IN THA

16914323

BATCH USE CORRECT COHERENCE-CACHE-CONFIG.XML IN ONLINE BATCH

16914425

BATCH COPY OF 16914402 - BATCH: NEW COMMAND LINE OPTION FOR JVM NAME

16918451

CONFIGTOOL COPY OF 16858291 - GUI SE: NOT DISPLAYING FLATTENED FIELD FUNCTIONS CORRECTLY ON

16919520

CONFIGTOOL COPY OF BUG 12617593 - ORASEARCHFIELD DOES NOT SEEM TO WORK WITH LITERALS

16923195

SYSWIDE GUI SE: LOOKUP HYPERLINK IN SCHEMA EDITOR DOES NOT NAVIGATE

16923342

TODO COPY OF BUG 16919009 - ISSUES IN PURGING COMPLETED TO DO ENTRIES USING 'F1-TDPG'

16928602

COMMON COPY OF 16836085 - DASHBOARD REMAINS POPULATED AFTER GOING TO CONTROL CENTRAL

16931190

COMMON COPY OF BUG 16917344 - WRONG ERROR MESSAGE WHEN ATTACHMENT VALIDATION IS FAILED

16934120

BATCH COPY OF 16164935 - EXCESSIVE DELAYS TO GENERATE A NEW BATCH RUN TREE

16936687

SYSWIDE COPY OF BUG 16923725 - IF A DISPLAY PROFILE IS YYYY-MM-DD, THE DATEPICKER WILL N

16942463

SYSWIDE CUSTOM ERROR PAGE FOR HTTP SERVER ERRORS

16946713

BATCH 00429 BATCH STABILITY

16950238

CONFIGTOOL HTML GENERATE ADDS LIST NAME TO THE XPATH FOR ELEMENTS WITH SEARCH ATTRIBUTES

16954046

CONFIGTOOL GUI SE: FLATTENED FIELD ROWS TO BE CREATED IF ATLEAST ONE FIELD VALUE IS ENTERED

16955376

BATCH COPY BUG 16787349 - INCORRECT IMPLEMENTATION OF BATCH LEVEL OF SERVICE DESC

16957497

CONFIGTOOL COPY OF BUG 16704821 - UNABLE TO RETRIEVE GLOBAL CONTEXT VARIABLE TO SET CHARAC

16959348

TODO COPY OF BUG 16951883 - TO DO : "SUBJECT" ELEMENT MISSING IN THE BUSINESS SERVICE

16974342

TODO COPY OF BUG 16974331 - COPY OF BUG 16815002 - TO DO SEARCH NEEDS TO BE A FAVORIT

16974508

DEVTOOLS API CHANGE MONITOR IS FAILING FOR GEN CHANGES

16985938

ENVIRON COPY OF 16762892 - LDAP CONFIGURATION TO CC&B 2.4 IS NOT WORKING

16986824

CONFIGTOOL COPY OF BUG 16950639 - UIHINT:SELECT BS NOT ALWAYS POPULATING DROPDOWNS

16986846

RELEASE COPY OF BUG 16727925 - UNABLE TO GET GEOCODE DATASOURCE CONNECTION IN BATCH

16989102

SYSWIDE COPY OF 14192814:MOVE TRANSLATABLE LOGIN PAGE TEXT TO MESSAGE METADATA

16989136

TRANSLT COPY OF BUG 16989121 - COPY OF 16768046: CCB_24_PL:2237:RIGHT ALT + C TRIGGER FU

16994281

XAIXAI WEBSERVICE ADAPTER SEARCH, LOG PAGE IS NOT GETTING RENDERED

16996294

SECURITY COPY OF 16461061 - VALUE TOO LONG ERROR POPUP WINDOW THROWN IN THE APPLICATION S

16997374

BATCH COPY OF 16956950 - BATCH JOB MO IS NOT AVAILABLE FOR BO MAINTENANCE

16999420

UIMAP COPY OF BUG 16999381 - COPY OF BUG 16999320 - COPY OF BUG 16999295 - COP

17010978

SECURITY ENHANCE UNMASKING FUNCTIONALITY FOR SCHEMA BASED FIELDS

17011266

XAIXAI COPY OF 16935190 - UNABLE TO CONVERT ELEMENT VALUE FROM XSD:DATETIME TO INTERNAL

17012500

RELEASE ENHANCED CLIENT CERT SUPPORT (ER 417)

17013221

BATCH COPY OF 16931039 ADD EXISTENCE-CHECK-SAVEPOINT OPTION FOR COBOL

17014351

COMMON COPY OF BUG 16844187 - ETM: ERROR IN UI GENERATION FOR MOS NOT USING F1-MAINPROC

17015187

WORKFLOW COPY OF 16959160 - SERVICE CILWDWNP NO LONGER POPULATING CTXT_TYP_DESCR

17016856

CONFIGTOOL FOREIGN KEY REFERENCE SYSTEM ERROR

17040509

UN COPY OF BUG 16562242 - CASETRAN BATCH JOB IS NOT RELEASING SAVEPOINTS

17049195

CONFIGTOOL UI DEPENDENTS WITHIN A GRID DOESNT WORK AS EXPECTED

17051441

MIGASSIST MIG REQUEST SELECT SPECIFIED KEYS SHOULD VALIDATE EXISTENCE

17053205

SECURITY COPY OF BUG 17053201 - COPY OF BUG 16630145 - LOGOUT IS NOT WORKING WHEN ACCESS

17054142

SYSWIDE TIPS DOCUMENT ISSUES

17060351

SYSWIDE FIREFOX 17 ESR : CERTIFICATION ISSUES - EXTRA BLANK SPACES

17061107

BATCH COPY OF 17049686 - MWM: LOS REASON MESSAGE SHOULD BE OPTIONAL IN BATCHLEVELOFSER

17064682

PORTAL PORTALINFOREPOSITORY CACHE IS ALWAYS USING NEW SESSION TO RETRIEVE ZONE METADATA

17070782

REVCTRL 00419 EMAIL NOTIFICATION IS NOT SENT ON FORCE CHECKIN IN SMART REVISION CONTROL

17076214

UN COPY OF BUG 17076211 - COPY OF BUG 17012812 - DASHBOARD POPULATED AFTER GOING TO

17076802

TRANSLT JAPANESE LANGUAGE IS NOT DISPLAYED IN THE LOGIN PAGE

17078825

CONFIGTOOL DUPLICATE STRINGS DISPLAYED IN MESSAGE FOR PORTALS COUNT

17160606

BATCH COPY OF 17160530 - SUBMITJOB DOES NOT ALLOW SPACE IN BATCH SOFT PARAMETERS.

17161494

PORTAL COPY OF BUG 17029115 - [CCB 231] - < CHARACTER EMBEDDED WITH SPACES WHEN USED

17166515

PORTAL 00445 CONFIGURE PIE CHART COLORS

17168122

DATAEXPLOR 00428 PAGINATION - ERR ON CLICK OF NEXT BUTTON ON F1-DE & F1-DE-QUERY ZONES.

17178065

CONFIGTOOL REQUEST TO UPDATE TIPS WITH THE NEW ENHANCEMENTS FOR SCHEMA AND MAPS

17179593

COMMON CORRECTION TO F1-BOSTATUS SCRIPT, SEARCH_LBL FIELD, F1-EDITACTIONS MAP

17195196

DATAEXPLOR COPY OF BUG 16689562 - OM2681;LOWCASE MGT_FILTER OPTION VALUE DISPLAYED IN ZONES

17203085

SYSWIDE COPY OF 17027605 - BACKPORT OF BUG 14270378 - ERROR MESSAGE NOT BEING CLEARED FR

17212326

SYSWIDE GUI SE:JS ERROR WHILE SELECTING A RECORD FROM DATA EXPLORER SEARCH ZONE

17215603

COMMON COPY BUG 16675764 GUI SE: EXTENDED DA EDITING SHOULD NOT ALLOW FOR ITS CHILD DA

17231337

CONFIGTOOL CACHING ISSUE WITH BUSINESS OBJECT RENDERED UI MAP

17242605

XAIXAI COPY OF 17232848 - XAI-XML FILE RECEIVER. GENERIC ERROR "XAI TOOL ERROR OCCURRED

17244399

BATCH COPY OF 17221519 - NULLPOINTEREXCEPTION IN F1-LDAP AFTER APPLYING PATCH 17165578

17247476

UIMAP NULL POINTER EXCEPTION IS COMING WHEN CLICK SCHEMA TAB IN UI

17252913

TODO TODO: "TYPE OF CHAR VALUE" ADDITIONAL COLUMN DISPLAYED IN CHROME

17257234

SYSWIDE COPY OF 16476077 - ETM: APPEAL VALIDATION WEB SERVICE ERROR ON OPA 10.4

17278840

UIMAP COPY OF BUG 16908713 - MDM: ISSUE WITH F1-RECORDACTIONSFUSION XHTML FRAGMENT

17278852

SYSWIDE COPY OF BUG 17278843 - COPY OF BUG 17244868 - HIBERNATE NOT RELEASING CONNECTION

17281733

DATAEXPLOR PAGINATION - PREV/NEXT BUTTONS ENABLED BY DEFAULT ON ZONE LOAD FOR F1-DE-QUERY

17294158

SYS COPY BUG 17290592 - SYNC ALGO F1-WAITRELSR NOT FINDING RELATED SYNC WITH SAME CR

17296911

TRANSLT COPY OF 17296906:RIGHT ALT + C TRIGGER FUNCTIONAL ACTION AFTER PATCH 16989136

17297239

SYSWIDE COPY OF BUG 16653838 - FEATURE CONFIGURATION PAGE REFRESH IS SLOW

17302132

TODO COPY OF BUG 17082999 - CM PORTAL LEADING TD ENTRY PAGE CANNOT BRING UP DEFAULT T

17308880

GEN COPY OF BUG 17273482 - AFTER CLICKING GET MORE, CONCURRENCY ERROR ENCOUNTERED FO

17314476

CONFIGTOOL COPY BUG 17179383 - MULTIPLE FLATTENED LISTS FROM SAME TABLE DO NOT WORK

17317416

COMMON ALGORITHM SEARCH BY ENTITY SHOULD SHOW DATA AFTER LAUNCHING

17318749

DATAEXPLOR COPY BUG 17285833 - HIDE CUSTOM SEARCH SELECTION ICON

17319827

CONFIGTOOL COPY 16956686-UI HINTS: FK INFO IS NOT CLEARED IF FK INPUT IS DEPENDENT ELEMENT

17321658

COMMON HELP LINKS NOT NAVIGATING TO CORRECT PAGES (NAV KEY ISSUES)

17325487

DATAEXPLOR 00384 PORTAL PERSONALIZATION: DUPLICATE KEY ERROR

17327811

COMMON COPY OF BUG 17022658 - EXTENDABLE LOOK UP BUTTON ISSUE

17329139

CONFIGTOOL COPY OF BUG 17061689 - ORAINVOKESS IN UI MAP FRAGMENT BREAKS DROPDOWN ELEMENT RE

17336559

SECURITY COPY OF 16926970 - ACTIVE DIRECTORY INTEGRATION WHEN CISUSER ROLE IS NOT USED

17336881

SYS COPY OF 17294111 - UNIXDOMAINSOCKET MASKS SOCKET ERROR NUMBER

17342459

MIGASSIST COPY OF 17342450 - COPY OF 17338595 - BUG 17211890 - MIGRATION DATA SET IMPORT -

17351419

SYSWIDE COPY OF BUG 17214853 - F1-FLUSH DOES NOT CLEAN UP TPW

17355943

CONFIGTOOL CANNOT BUNDLE AN EXPORT BUNDLE - ERROR IS "MISSING EXTERNAL REFERENCE ID"

17358494

CONFIGTOOL COPY OF 17254746 - SPACES NOT BEING REMOVED FROM SPECIFIED ELEMENTS

17358916

SYSWIDE COPY OF BUG 14839792 - ETM:CUSTOM CHANGE HANDLER ON PAYMENT EVENT EXCEPTION NOT

17369072

XAIXAI STDTIMEREF IS NOT BEING CONVERTED TO OUAF STANDARD TIME

17376032

BATCH ETM: ERROR ENCOUNTERED CREATING TO DO DURING BATCH ERROR

17378478

SYSWIDE LIST OF CHROME BROWSER ISSUES ON 4.2.0.2.0

17379574

UIMAP COPY OF BUG 17305257 - FW4.2 TO FW4.2 SP1 UPGRADE ALIGNMENT & JAVA SCRIPT ISSUES

17380127

PORTAL F1-DE DOES NOT SUPPORT PAGINATION FOR MULTIPLE SQL DATABASE QUERIES

17384044

RELEASE COPY OF BUG 17316663 - UT OUTBOUND MESSAGE PREFIXES NAMESPACE DETAILS TO EVERY E

17387216

PORTAL QUERY PAGENEXT CONDITION SHOULD NOT BE REPEATED IN PAGEPREV CONDTION.

17399370

SYS NO POP ERROR IS THROWN WHEN USER CLICK "CREATE ALGORITHM" WITHOUT ADD PERMISSION

17411212

RELEASE CHECK JAVA_HOME GREATER OR EQUAL TO 1.6

17411559

CONFIGTOOL INCONSISTENCIES WITH HTML GENERATION OF UIHINT:DISPLAYNONE

17416992

RELEASE ADD GENERIC USER EXITS IN WEB.XML TEMPLATES

17418451

XAIXAI COPY BUG 17418262 TO 4.2.0.2.0

17418970

CONFIGTOOL COPY OF 17384099 - STACKED CHART NEEDS TO SUPPORT MORE THAN 5 SERIES

17428495

CONFIGTOOL COPY OF 17258929 - ADDRESS VALIDATION NOT WORKING IN SP1 DEMO

17428619

COMMON 7365200 - COPY OF 17364929 - NO CURRENCY SYMBOL WHEN FORMATTING MONEY USING CURR

17428687

PORTAL PAGINATION - PREV/NEXT BUTTONS NOT DISPLAY TO LEFT WHEN ALIGN=LEFT IS USED

17429092

PORTAL PAGINATION - BUTTON BAR DOES NOT DISPLAY BELOW RESULT-GRID WHEN LOCATION=BOTTOM

17429335

PORTAL PAGINATION - BUTTON BAR DOES NOT DISPLAY LINK WHEN MNEMONIC DISPLAY=LINK IS USED

17432160

UIMAP COPY OF BUG 17377813 - ISSUE WITH ORAHANDLEDEPENDENTELEMENTS JAVASCRIPT FUNCTION

17432948

PORTAL PAGINATION - UNABLE TO USE VALUE SHOW=FALSE FOR PARAM RECORD COUNT DISPLAY

17432978

PORTAL PAGINATION - RECORD COUNT IS DISPLAYED ON UI EVEN IF THE PARAMETER IS OMITTED

17433093

PORTAL PAGINATION - ON PREV BUTTON CLICK, INCORRECT NUMBER OF RECORDS ARE DISPLAYED.

17434656

UN COPY OF BUG 17434604 - ARREARSBAR WIDTH ON CONTENT.XSL

17438370

DATABASE TABLE FIELDS HAVING NULLABLE IN METADATA AND ARE DEFINED AS NOT NULL ON DATABASE

17439746

SYSWIDE COPY OF BUG 17432895 - DEPENDENT DROP DOWNS: ISSUES WITH CLEARING FK REF CONTAIN

17454775

CONFIGTOOL COPY OF 16504293 - ON F1-DE-QUERY ZONE, USING REFRESH=PORTAL PARM ON MULTI SELEC

17458277

CONFIGTOOL COPY BUG 17450267 - MULTIPLE DATE ICONS ON FILTER MAP IS DISPLAYED WHEN ZONE

17464635

XAIXAI COPY BUG 17464596 TO 4.2.0.2.0

17465984

TODO COPY OF 17420015 - TO DO TYPE MESSAGE OVERRIDE NOT WORKING WITH F1-ADDTODOENTRY

17473957

CONFIGTOOL COPY OF BUG 17471956 - UI HINTS: DEFAULT VALUE IS BEING SET EVEN ON UPDATE

17478487

SECURITY COPY OF BUG 17438161 - PERSISTENT CROSS-SITE SCRIPTING (XSS)

17479115

PORTAL PAGINATION - BUTTON BAR DOES NOT DISPLAY ICON WHEN MNEMONIC DISPLAY=ICON IS USED

17479355

CONFIGTOOL COPY OF BUG 17472596 - REQUIRED FIELD IS MISSING ERROR WHEN TRANSITIONING EVEN I

17479539

PORTAL PAGINATION - JAVA SCRIPT ERROR WHEN QUERY ZONE IS SELECTED FROM A MULQRY ZONE

17480112

PORTAL JS ERROR IS THROWN WHEN CLICKED ON FK REF HYPERLINK

17480592

DATAEXPLOR COPY OF BUG 17337014 - PATCH 16689562 IS NOT WORKING

17489380

SCRIPT COPY BUG 17489370 COPY BUG 17489467 COPY BUG 17206714 - ETM: HAVE THE BROWSER

17490279

RELEASE COPY OF 17180419 - MWM TEMPLATES GETS OVERRIDDEN BY FW TEMPLATES UPON RUNNING IN

17504918

MIGASSIST COPY OF 17478927 - CMA IS NOT HANDLING "TIME" FIELDS CORRECTLY WHEN RUNNING F1-M

17506003

MIGASSIST CMA:SQLINTEGRITYCONSTRAINTVIOLATIONEXCEPTION EXCEPTION IS COMING AT THE TIME OF

17508045

COMMON COPY OF BUG 17055049 - NO RESPONSE WHEN CLICKED ADD AFTER EXPORT TO EXCEL

17510170

XAIXAI COPY OF 17505391 - CCB 2.4 CAN'T SEND MAIL THRU XAI DUE TO TYPO ERROR IN CLASS E

17511163

RELEASE CHANGE PROCESS TEMPLATE TO HANDLE MODULES DYNAMICALLY

17528274

TODO COPY OF BUG 17445631 - COPY OF 14681890 ONLY EXTRACT THE FIRST SKILL DESCRIPTIO

17534449

CONFIGTOOL COPY OF BUG 17441910 - ADD DIALOGUE THAT PROMPTS FOR BO SHOULD CHECK ADD SECURIT

17535135

GEN HIJIR MAPPINGS BROKEN IN FF 17ESR

17535690

COMMON COPY OF 17535672 COPY OF BUG 17456202 - COPY OF 17176825 - TO DO TYPE

17539824

XAIXAI FF : 00234 IWS DEPLOYMENT OPERATION FIELDS NOT VISIBLE

17542235

SECURITY COPY OF BUG 17533662 - JAVASCRIPT ALERT BOX WHILE EXECUTING BPA SCRIPT

17558780

SYSWIDE COPY OF 17517869 : ACCELERATOR KEY ALT-INSERT AND ALT-DELETE NOT INSERT/DELETE R

17560454

DATAEXPLOR PAGINATION - PREV/NEXT BUTTONS ENABLE EVEN WHEN NO RECORDS ARE FETCHED

17562189

BATCH COPY OF 16599494 - BILLING BATCH JOB FREEZES

17562401

CONFIGTOOL COPY OF BUG 17555647 - ETM: UIHINT:DEPENDENT FUNCTIONALITY NOT WORKING AFTER APP

17564470

SYSWIDE COPY OF BUG 17517777 - ACCELERATOR KEY ALT-RIGHT ARROW AND ALT-LEFT ARROW DOES N

17569995

SYSWIDE ILM SUPPORT-HANDLE NULL POINTER EXCEPTION (NPE) WHEN PARENT RECORD IS ARCHIVED

17584819

CONFIGTOOL COPY OF BUG 17583089 - ETM: DEPENDENT FUNCTIONALITY NOT WORKING IF DEPENDENT ELE

17587199

PORTAL PAGINATION:WHEN DISPLAY=ICON AND ICON="<ICON-PATH>" IS GIVEN, DEFAULT ICON APPEA

17596020

TODO COPY OF 17596015 - COPY OF 17506764 - CREATED LOG TYPE NOT INSERTED WHEN CREATIN

17602459

ENVIRON FW: COPY OF BUG 17602442 - APPLICATION NOT PROPERLY RELEASING THE SOCKETS

17604664

SYSWIDE COPY OF BUG 16925841 - COPY OF BUG 16186722 - COPY OF BUG 14575643 - CAN'T USE

17615874

BATCH BATCH LOS: REMOVE ALG ENTITY FLG 'REASON'

17624749

UIMAP COPY OF 17408028 - ADA: TOOLTIPS ARE NOT BEING GENERATED PROPERLY FOR FK REFS ON

17629150

DATABASE COPY OF 17348986 - ISSUE WITH THE ONS.JAR LIBRARY

17634530

ENVIRON ETM: SETTING WEBLOGIC DFILE.ENCODING TO UTF8

17638274

PORTAL PAGINATION:WHEN TYPE=APPEND AND DISPLAY=ICON, ONLY NEXT ICON/BUTTON SHALL DISPLA

17661834

BATCH COPY OF 17589610 - TIMED BATCH DOES NOT AUTOMATICALLY RECOVER WHEN PROCESS CRASH

17664385

MIGASSIST COPY OF 17651139 - CMA ON EXPORT - UNABLE TO COPY RECORDS ON TABLE C1_REP_GRP_ME

17696997

XAIXAI COPY OF 17649461 - UNABLE TO PROCESS INBOUND XAI REQUESTS WHICH DO NOT HAVE SOA

17711365

UIMAP INPUT MAP AND DISPLAY MAP GENERATING THE SAME MAP

17748110

UIMAP COPY OF BUG 17414002 - UIHINT:CAPITALIZE="TRUE" DOES NOT CAPITALIZE TEXT AFTER A

17749014

CONFIGTOOL COPY OF 17743032 - GUI SE: TIME DATA TYPE IS MISSING

17750870

XAIXAI COPY BUG 17750857 TO 4.2.0.2.0

17754380

SYSWIDE COPY BUG 17754375 - COPY BUG 17754366 - COPY BUG 17741118 - ETM: PATCHES CAUSING

17799642

XAIXAI COPY OF 17794062 - ERROR COMMUNICATING WITH XAI JAVA.IO.IOEXCEPTION: UNAUTHORIZ

17800918

CONFIGTOOL COPY OF BUG 17592316 - SEARCH FIELD FROM CUSTOM SEARCH NOT RETAINED ON THE FILTE

17808097

XAIXAI XAI INBOUND SERVICE ADDED -(F135783055) AS TEST DATA

17821581

RELEASE RELEASE BUG FOR 13770531

17830956

SYSWIDE COPY OF BUG 17830939 - COPY OF BUG 17609265 - LOCKING OCCURS IN USERZONEPREFEREN

17835698

MIGASSIST REVIEW DESCRIPTIONS OF MIGRATION PLANS IN DEV

17837536

GEN COPY OF BUG 16219683 - CCB 2.4.0 RATE SCHEDULE SERVICE AGREEMENT SEARCH ERROR WH

17837742

SYSWIDE COPY OF 16726511 - VERIFY AND SIGN CTI AND POS COMPONENTS

17838014

WORKFLOW COPY OF 17600131 - WORKFLOW PROCESS TEMPLATE BEHAVIOR DOES NOT MATCH CCB PROCESS

17841697

XAIXAI NEGATIVE ID CAUSES IWS SEMAPHORE LOCK DENIAL

17879109

TODO COPY OF BUG 17801211 - ADD TODO ENTRY QUERY PAGE DOES NOT FILTER OUT AUTOMATIC T

17879687

TODO COPY OF BUG 17879674 - COPY OF BUG 17760781 - SUPERVISOR TO DO ASSIGNMENT SHOWS

17890002

BATCH BYPASS TO DO FOR ARCHIVED ENTITIES

17902824

GEN API CHANGE MONITOR: CONSUTRUCTOR SHOULD BE IN REPORT.

17912181

BATCH COPY OF 17797353 - MWM: BATCH JOB M1-TSKTR FAILS EVERY MORNING DURING THE FIRST

Bugs Fixed in Version 4.2.0 Service Pack 1

Bug Fix

Description

9580915

APP VIEWER STARTS WITH WRONG LANGUAGE (INCORRECT COOKIE NAME)

12919398

INCONSISTANT SPACE BETWEEN INPUT TEXT AND CUSTOM SEARCH TEXT FIELDS.

13000579

11748 SECURITY & ENCRYPTION FOR CREDIT CARDS, PASSWORDS, SENSITIVE INFO

13080330

CONTEXT MENU NOT SHOWING UP THOUGH CONTEXT:TRUE IS SPECIFIED IN THE DISPLAY MAP.

13578297

FIREFOX-MDM: KEYBOARD FOCUS LOST AFTER SAVE/CANCEL OF RECORD

13618718

HORIZONTAL SCROLL BAR NOT VISIBLE FOR DISPLAY UI MAPS

13868034

MDM ADA: INCORRECT TAB STOPS IN UI MAP AND EXPLORER ZONE

13868197

MDM ADA: UI MAP ENHANCEMENT FOR INCLUDING TITLE IF MISSING IN HTML MARKUP

13896710

COPY OF BUG 13066151 - CLICKING ON THE DOWN ARROW DOES NOT REDUCE A DATEUSING O

14004760

VALIDATION REQUIRED FOR EXTERNAL URL

14119912

00378 USER FRIENDLY SCHEMA EDITOR

14157189

JS ERROR WHEN WE CLICK ON THE LIFECYCLE TAB IN THE BO PAGE

14222796

ADA: PAGE TABS ON 360 DEGRESS VIEW WERE NOT MARKED WITH ARIA TAB.

14238506

COPY OF 14238494 - ZONE MENU PRINT ZONE DOES NOT PRINT COMPLETE ZONE IN MAPEXPL

14313699

FIREFOX: TIME LINE ZONES ARE NOT DISPLAYING PROPERLY IN FIREFOX BROWSER.

14319227

COPY OF MAKE SYSUSER CMABLE

14328272

IN FIREFOX THE XAI SERVICE IMPORT PAGE IS NOT ALLIGNED PROPERLY

14328361

IN FIREFOX: UNABLE TO NAVIGATE TO ANY OTHER PAGE FROM XAI SERVICE IMPORT PAGE

14328440

UIHINT SELECT DROPDOWN NOT WORKING WHEN INPUT PARAM IS OUTSIDE LIST

14373356

SDP PROTOCOL SUPPORT FOR XAI

14377685

SELECTING ROW ON POPUP ZONE SEARCHES

14392770

JAVASCRIPT ERROR IS THROWN WHEN USER SELECTS A FILE TO UPLOAD IN ATTACHMENTS.

14400458

SYNC REQUEST PAGE HANGS ONLICK OF REFRESH PAGE

14510051

UNSET SERVICE SCRIPT GROUP ELEMENT IS NOT RETURNED AFTER INVOCATION

14510966

ATTACHMENT CONTENT (COULD BE BIG) SHOULD NOT BE SHOWN IN ADVANCED DEBUGGER

14542185

COMMON ATTACHMENTS - ISSUES

14562796

TEST DATA IN LOOKUP FLAG F1AW_OPT_TYP_FLG

14576442

MDM: SCHEMA TIPS/DOC MUST BE UPDATED FOR FLATTENED EFFECTIVE DATED ELEMENTS

14588358

COPY OF 14082530 - XAI ERROR PROCESSING XSD DATE FORMAT

14588484

COPY OF 14588469 - COPY OF 14401947 - GEOCODING SERVICE RETURNING INCORRECT RESU

14596139

COPY OF 14581708 - ODM: ERROR WHILE ADDING OWNED ATTACHMENTS

14599635

COPY OF 14569219 - BATCH SUBMISSIONS STAYS IN PENDING STATE

14600498

COPY OF BUG 14600491 - D1-IMD BATCH JOB IS FAILING WITH CLASSCASTEXCEPTION

14608227

UNABLE TO ADD A STATUS REASON ON ANY BO WHERE STATUS REASON BO IS FW'S CHILD BO

14614596

COPY OF BUG 14579412: ODM: UIHINTS: FKREF NOT WORKING ON LIST ELEMENTS

14615474

COPY OF 14565442 - ONBLUR IS NOT WORKING FOR XHTML MAPS

14618088

SCROLL BARS SHOWN IN THE DISPLAY MAP OF BO WITH UIHINTS

14626892

COPY OF 14560564 - LIST GRID IS DISTORTED WHEN A POP-UP ERROR IS DISPLAYED

14627866

COPY OF BUG 14524888 - ERROR MESSAGE IS BEING CLEARED IN SUBSEQUENT SERVICE CALL

14627989

COPY OF BUG 14627977 - COPY OF BUG 13893299 - OTSS: ADD NEW MANAGED CONTENT TYPE

14628258

COPY OF BUG 14521962 - SMS SEND SERVICE FAIL AUTHENTICATION

14628479

COPY OF BUG 14545944 - CONTEXT MENU FROM UI MAP POPULATES CONTEXT FIELDS INCORRECT

14630637

SUPPORT NEW LOOKUP GENERATION KEYWORD IN PATCH FILES

14631157

COPY OF 12366543 - SPL.SH DISPLAYS WRONG PROCESS ID (PID) FOR STARTWEBLOGIC.SH

14635211

COPY OF 14634316 MULTIPLE USERS DEBUGING GIVES ERROR

14635317

COPY OF 11067376 -XAI IMPORT SERVICE FUNCTIONALITY IS NOT WORKING

14635812

COPY OF 14189386 - WHEN WE RESET ZONE BUTTON TEXT ARE CLEARED

14637555

COPY OF 14539076 - ADD WLFULLCLIENT TO FW DISTIBUTION

14638816

COPY OF 14544366 - UIHINTS : CSV FILE UPLOAD NOT WORKING FOR BO'S WITH UI HINTS

14638817

COPY OF 14609627 - SHORT-TERM STRATEGY FOR HEADER TAB STOPS FOR CCB

14641272

Z1 COMPONENTS IN DEVELOPMENT ENVIRONMENT

14641392

COPY OF BUG 14565634 - UNABLE TO OPEN APP VIEWER FROM MENU (WRONG URL CONNECTION)

14642561

COPY 14642554 - ABILITY TO SET XAI TRACE TYPE SO THAT ONLY TRANSACTIONS IN ERROR

14648721

COPY OF 14504240 - MUP2'S SUBMITJOB.SH STAYS RUNNING TWICE AS LONG AS MUP2 RUNTI

14651147

COPY OF 14527006 - CCB: BATCH - SAX PARSER ERROR AND UNPREDICTABLE OUTPUT FILE L

14652819

ETM: ALLOW OPTION TO DISABLE AUTOMATIC FORMATTING OF NUMERIC FIELDS VIA UIHINTS

14654009

COPY OF 14559104 - DEFAULT VALUES SHOULD NOT BE APPLIED ON LIST ELEMENTS DURING

14658828

COPY OF BUG 14626695 - ERROR LABELING DYNAMIC FIELDS

14661035

COPY BUG 14661021 - COPY BUG 14629214 - ETM:ETPM LOGIN PERFORMANCE ISSUE

14661317

DISPLAY ONLY VALID XAI CLASSES IN THE SENDER/RECEIVER SEARCH PAGE

14661459

COPY OF 14631396 - UIHINT:DISPLAYNONE CORRECTION TO NOT HAVE 'ITEM' AS FIRST PAR

14661918

COPY OF 14621732 - UIHINT: UI HINTS BS DROP DOWN IS NOT WORKING IN ONLOAD IF ID

14669676

ELEMENT 'SC' (SCROLL) IS NOT USING LABEL STYLE ORALABEL

14675636

ODM: OLD ERROR MESSAGE BEING SHOWN IN MULTI-QUERY ZONES

14680999

COPY OF 14544452 - ODM: UI HINTS ISSUE - DEFAULT VALUE IN DROPDOWN NOT GETTING S

14686683

COPY OF 14589038 - COPY OF 14353910 - BILLING BATCH RUN TREE IN ERROR AFTER RUNN

14692761

COPY OF BUG 14676277 - ODM V2.0.1 TPW HAS ISSUES ON AIX PLATFORM

14694752

EXPOSE BATCH GLOBAL VIEW ITEMS

14695217

COPY OF 14640113 - PK VALUE MISSING FOR LIST IN DA F1COMMONMESSAGEDATA

14695824

DATE TIME PICKER LABEL APPEARS IN XAI DYNAMIC SUBMISSION UI

14699133

CAPABILITY TO RUN DATABASE BLUEPRINT BY ANY NON-SCHEMA OWNER IS BROKEN

14699509

COPY OF BUG 14699506 - UNIQUE CONSTRAINT ISSUE FOR CI_TAX_ROLE_K

14703180

COPY OF 14671706 - INVALID D2-SSMETERREADTASKTYPE BO SCHEMA PRESENT IN APPLICATI

14706373

COPY OF 14727095 - REAL TIME HTTP SENDER DOES NOT IMPLEMENT HTTP TRANSPORT METHO

14708575

COULD NOT LOAD THE TRANSLET CLASS 'GREGORSAMSA'

14709991

COPY OF BUG 14708436 - FUNCTION DISABLEDATETIME DOES NOT DISABLE THE CALENDAR IC

14722199

ETM: DEFAULTING CURRENCY FROM INSTALLATION

14736675

DASHBOARD ZONES ARE OVERLAPPING

14737603

COPY OF BUG 14600735 - SHORT-TERM STRATEGY FOR CALENDAR ICONS

14740424

COPY OF 14730885 - DELETE SERVICE PROGRAM: CILYDFQL

14740550

COPY OF 14729592 - ORADISPLAYNONE ENFORCES BLOCK STYLE; ORAFIELD ISSUES

14746035

COPY 14751617 - JMS MESSAGES ERROR OUT IS ASSOCIATED USER HAS TRAILING SPACE

14747057

WHEN BO OPTION TYPE EXTERNAL SYSTEM IS SELECTED THE OPTION VALUE DOES NOT DISPLA

14752196

COPY OF 14602866 - CI_WF_PROC_K DATA ROLE FLAG SHOULD BE CONVERT (RETAIN PK)

14757161

COPY OF 14711726 - STATUS REMAINS IN PROGRESS WHEN WORKER KILLED

14757970

TEMPLATIZE JMX CONFIGURATION FOR THE APPSERVER

14763849

COPY OF BUG 14736785 - DATE/DATETIME DISPLAY FORMAT ISSUE ON TREES

14764710

COPY OF BUG 14664647 - MDM2.1.0 UIHINT DEPENDENT ELEMENT NOT GETTING POPULATED C

14770092

COPY OF 14736454 - COMPARE UTILITY ERROR 256 - A NON-ZERO CODE WAS RETURNED BY C

14770399

COPY OF 14751302 - WEBSPHERE BASIC/ND DEPLOYMENT SCRIPTS IN OUAF: V4.1.0.1.0 IS

14772819

FIREFOX : TABBING ON GO TO ZONE ICON NAVIGATES TO ZONE PAGE

14773808

COPY OF BUG 14708140 - 00371 IMPROVE PERFORMANCE OF DATABASE TAGGING

14774682

CUSTOM SEARCH POPUP HAS WRONG FONT ON CUSTOM SEARCH FIELD INFO STRING

14777124

COPY OF 14614586 - THE CONTEXT MENU BUTTON IN SOME UI MAPS ARE NOT WORKING. ON C

14790682

COPY OF BUG 14789571 - MISSING NAVIGATION KEY FOR SYNC REQUEST HELP DOCUMENT

14791458

COPY OF BUG 14772030 - ACCORDION DOES NOT ALWAYS DISPLAY THE GRID IT CONTAINS

14804081

COPY OF BUG 14804078 - COPY OF BUG 14803928 - COPY OF BUG 14803908 - COPY OF BUG

14805063

COPY OF 14240578 - JS ERROR ENCOUNTERED AND BUTTON IS DISABLED WHEN MAP IS CANCE

14831752

ER 405 - EMAIL SERVICE AND ATTACHMENTS

14835151

UIHINT:SECTIONOPEN="FALSE" BREAKS UIHINT:DEPENDENTS ONCHANGE EVENT

14844684

COPY OF 14744330 - EMAIL CLIENT PROBLEM IN BATCH ON 32 BIT

15829295

COPY OF 14808137 - MULTI SELECT ZONES ARE NOT WORKING CORRECTLY IF SORTED

15838578

COPY OF 13072602 ETM: OPA - ERROR GENERATING DATA AREAS/CALLING WEB SERVICE DI

15839437

QUERY ZONE NOT DISPLAYING TOTAL NUMBER OF ROW RESULT

15839882

COPY OF 14769626 - COPY OF 13790776 - USING RENUMBER BUTTON BRAKES SOME BPA SCRIPTS

15847477

COPY OF BUG 14647651 - HORIZONTAL SCROLL ON INLINE HELP POPUP

15867632

COPY OF 15863907 - COPY OF 15857954 - UNKNOWN DATE IS USED TO COMPARE AGAINST

15868749

ETM:XAI PRINTS USER PASSWORD IN XAI.TRC

15868783

COPY BUG 14787869 CCB CALL TO INTEGRATION LAYER WHEN THE JMS Q IS PAUSED THROW

15874664

REALTIME SENDERS CACHE NOT ACCESSIBLE FROM JMX

15893223

COPY OF 14156144 - SCRIPT ENGINE V 3.0 BUG - INCORRECT REFERENCING TEMPORARY VA

15893616

COPY OF 15873943 - SCR_CD IS INCORRECTLY UPPERCASED WHEN ADDING TO USER FAVORITE

15894676

COPY OF BUG 15841356 - ENHANCEMENT TO SUPPORT MULTIPLE DATA SOURCE INDICATOR

15905526

COPY OF 15905379 - INSTALLSF.PLX SHOULD ALLOW TO INSTALL CCB 2.4.0.0.0 HF ON 2.4

15919502

COPY OF 14851115 - MWM BATCH JOB M1-TSKTR RUNS AND KEEPS FAILING EVERY MINUTE

15943303

COPY OF 13883686 - RENDERING OF DATETIMES USING REFERENCED TIME ZONE DOES NOT SH

15948925

COPY OF 15945711 - COPY OF 14510102 - COPY OF 14394216 - ETM:IMPLEMENTING ETPM 2

15949665

COPY OF 10435036 - ADDING LARGE MESSAGE IN THE LOG TAB TRUNCATES, BUT NO WARNING

15952704

CTRL+SHIFT+S SHORCUT ENABLES THE DEBUGGER IN FIREFOX 17 ESR

15969738

COPY OF BUG 15963686 - COPY OF BUG 14684549 - ASSIGNMENT OF TO DO'S NOT LOGGED C

15974911

SPECIFIED COLUMN FOR SQL IN ZONE CONSIDERS C12 AS C1 AND APPENDS 2

15976526

NEWLY CREATED TODO TYPE IS NOT AVAILABLE IMMEDIATELY TO CREATE TODO ENTRY

15979879

COPY OF 13800043 - ENHANCE LOGGING TO INCLUDE CONTEXT IN SQL CALLS

15980396

COPY OF 15992858 EMIT EMPTY ELEMENTS ATTRIBUTE NOT RETAINED IN INCLUDED SCHEMA

15983232

ETM: INPUT FIELD IN A TABLE INSIDE A TABLE IS NOT GENERATING PROPER ID

15989640

EXTENDED LOOKUP RECORD GETTING DELETED WHEN WE CLICK ON CANCEL BUTTON

15999152

FIX DATABASE HEALTH CHECK SQL FOR INDEX VALIDATION

16008752

COPY OF BUG 15892253 - RECORDSLOADBATCH SHOULD USE THREAD-ITERATION STRATEGY

16019739

UIHINTS: SCHEMA VALIDATIONS NOT WORKING FOR GROUPS OR LISTS

16024356

COPY OF 14840823 - ANTLR CONFLICT ISSUE WITH WIN32

16034715

COPY OF 14755292 - IE 8 FROZEN AND HAS TO BE KILLED WHEN NAVIGATING ON TABLE MEN

16036807

COPY OF 14672381 - BATCH PERFORMANCE AND EXCEPTION HANDLING ENHANCEMENTS

16037258

MDM: JAXEN CAUSES XSLT/JAVASCRIPT FAILURE IN WEBSPHERE FW4.2

16047746

COPY BUG 16037414 - MISSING "SEQUENCE" ATTRIBUTE DEFINITION FROM CDXUSERMAIN

16090338

MDM : IMD ACTIONS PANEL IS BLANK WHEN CHOOSING UTC TIME ZONE

16091326

COPY OF 16087749 - ABILITY TO CALL A CUSTOM XAI SERVICE WITHOUT CHANGING THE FIR

16096506

COPY OF 16182645 - BS F1-SYNCMSTDTA SHOULD VALIDATE IF INPUT HAS A VALUE BEFORE

16100079

EJB INITIALIZATION UNABLE TO FIND SPL.PROPERTIES USING THE SPLEBASE ENV VARIABLE

16105233

MDM:UIHINT: SELECT DOES NOT WORK WHEN ELEMENT HAS ISPRIMARYKEY="TRUE" ATTRIBUTE.

16174565

JS ERROR WHILE SEARCHING IN DATA EXPLORER POP-UP

16186980

COPY OF 15966433 - BATCH JOBS REMAIN IN 'STARTED' STATUS IN CI_BATCH_JOB TABLE

16193071

COPY OF 13743074 - ERROR SERVER HAS ENCOUNTERED A PROBLEM WHEN SELECTING MORE TH

16205637

DEPRECATE -CHARACTERISTIC COLLECTION MAPS THAT WERE ADDED USING BUG 10397029

16215020

CLICK ON 'TEST UI MAP' LOADS INVALID UI MAP

16217185

COPY OF 16184414 - JOB FAILING WHEN CALLED ALGORITHM RAISES ERROR IN THE MIDDLE

16273717

RENAME DATABASE RELEASE UTILITIES AS PER ORACLE STANDARDS

16286927

COPY OF BUG 16184921 - ETM:DECISION REPORT (ATTACHMENT ENTITY) NAVIGATION DOES N

16290006

EXCEPTION THROWN WHENSYSTEM EVENT "GET LEVEL OF SERVICE" ADDED TO EXISTING BATCH

16293966

XAI COMPONENTS ARE NOT WORKING AS EXPECTED

16299048

4.2 SP1 AUDIT - FOREIGN KEY VALIDATION ERRORS

16315870

F1-EMAILMESSAGE SERVICE IS NOT WORKING BECAUSE OF BO SCHEMA ERROR

16326843

INVOKE BO FOR READ DOES NOT RETURN THE BO SCHEMA ELEMENTS

16368009

LOS IS ALWAYS SET ERROR FOR THE SUCCESFUL EXECUTION OF THE NON-TIME BATCH JOBS

16372187

ER 405-EMAIL SERVICE AND ATTACHMENTS-REVERT CHANGES MADE IN BO F1- EMAILMESSAGE

16374065

JS ERROR IS THROWN WHILE NAVIGATING TO CALCULATION RULE DISPLAY MAP

16448317

COPY OF 14592799 DELETE TEST DATA - BO_12375579_TEST

Bugs Fixed in Version 4.2.0.0

Bug Fix

Description

16517004

COPY OF 13000618 - UI MAP: SOME COMMON SCHEMA ISSUES FOR WHICH UI MAP NOT RENDER

14838056

ORASDUPG.PLX NEEDS TO BE UPDATED NOT TO ACCEPT VALUE FOR -U SWITCH

14574730

[XAI] WSDL URL CONTAINS INCOMPLETE SERVER NAME

14546912

ADD FUZZY SEARCH INFO (MOD 00155) TO THE ZONE TIPS

14543687

REMOVE REDUNDATE CALL TO SAVE ACTION DATABASE TAG

14539199

COPY OF 14484493 - COPY OF 14337865 - CCB: STALEOBJECTSTATEEXCEPTION WHEN ACTIVA

14537422

UP/DOWN ARROWS ON DORPDOWN BOXES IN A GRID DO NOT WORK AS EXPECTED

14525843

ODM:UI HINTS: SUPPRESS FUNCTIONALITY IS NOT WORKING UI HINTS

14521902

COPY OF 1453624 WSDLSEARCH SHOULD BE AVAILABLE ONLY FOR OPA WEB SERVICE ADAPTERS

14516683

F1-EXSYS CHAR TYPE DESCRIPTION

14516468

FIX AUDIT QUERY BY TABLE/FIELD/KEY DYNAMIC FIELDS TO MATCH FUSION LOOK

14516400

AFTER SELECTING VALUE FROM CUSTOM SEARCH IT CAUSES DOUBLE LOAD

14516373

CONTEXT MENU NOT WORKING ON UI MAP - JS ERROR ENCOUNTERED

14516361

BILL SEGMENT GRID IS NOT DISPLAYED AFTER FW UPGRADE

14501612

COPY OF 14501604 - COPY OF 14461057 - UI MAP?S ORADOWNLOADDATA DOES NOT WORK FOR

14500088

COPY BUG 13871351 - ERROR WHEN IMPORTING A BUNDLE CONTAINING SOME MOS

14499487

CHANGE BATCH GLOBAL VIEW TO BE CM OWNED

14499017

COMPARE DATE NOT SET ON IMPORT

14495958

COPY OF 14125771 - STABILITY ISSUE - REMOTE JVM SPAWN/DIE LOOP

14490091

PARTIAL ACTION BUTTON SHOWING IF SWITCH FROM 1 QUERY TO ANOTHER ON MULTIQUERY

14485534

COPY OF 14305425 - STEPS OF SCRIPTS ARE NOT DISPALYED WHEN THE FRENCH LANGUAGE I

14484837

LOOKUP GENERATION FAILS IF A LOOKUP FIELD'S VALUE HAS A NULL JAVA VALUE NAME

14478611

CLASS CAST EXCEPTION WHEN SENDING NOTIFICATIONS

14475705

BGV:500 INTERNAL SERVER ERROR IS COMING IN BATCH CLUSTER PAGE.

14475508

BGV: UI ISSUES IN BATCH CLUSTER PAGE

14473950

4.2 COPY BUG OF BUG # 14318856 - ETPM LOGIN PERFORMANCE ISSUE

14472768

COPY OF 14292770 - ODM: BS F1-UPDATESYNCREQUEST HAS NON-EXISTENT APP SERVICE F1-

14465698

COPY OF 14366851 - ETM: NULL POINTER EXCEPTION ENCOUNTERED IF MESSAGE PARM TYPE

14465486

PROVIDE POSTINSTALLATION SCRIPTS FOR EDGEPRODUCTS

14463732

COPY BUG 14199085 - F1-ADDMOLOG BUSINESS SERVICE LIMITED TO 9 MESSAGE PARMS

14462188

ADD SYNC REQUEST SEARCH BY SYNC REQUEST ID

14459050

CALENDAR POPUPS ARE NOT DISPLAYING PROPERLY

14458941

ENHANCE SEARCH SELECTION AND FIX TABBING ISSUES ON SELECT ICON

14458122

CMA APPLIED AN INVALID SCHEMA (BAD SCHEMA CONSTANT)

14458045

FW420 DATABASE HEALTH CHECK

14456321

REPORT SUBMISSION DOES NOT WORK.

14402957

BGV: BATCH CLUSTER PAGE IS NOT DISPLAYING ALL TPW'S THAT ARE RUNNING IN THE ENV

14402924

CONTEXT MENU IS NOT DISPLAYING ALL MENU LINES

14395422

MAKE A CALL TO RETRIEVE BASE TIME ZONE LANG_CD AGNOSTIC

14392739

IMPROPER ERROR MESSAGE WHILE USER TRIES TO UPLOAD WITH EMPTY FILENAME.

14391697

JAVA SCRIPT ERROR "NAVOPTIONCODE IS NULL" IS COMING WHEN WE CLICK USERS IN WORK

14390431

CLEAR BUTTON DOES NOT WORK IN FIREFOX ,IN IE ITS WORKING

14386081

COPY OF 14358963 - COPY OF 13967754 - MSG_PARM_VAL FIELD TOO SMALL TO SUPPORT LO

14383530

LOOKUP VALIDATIONS TO ENSURE JAVA NAMES ARE CORRECT.

14380527

JAVAX.XML.TRANSFORM.TRANSFORMERCONFIGURATIONEXCEPTION WHILE SENDING MESSAGE

14378130

MODIFY SANITY TO USE ENVIRONMENTCONFIG.CSV AND OUAFCORE FUNCTIONS

14376352

IMPROPER ERROR MESSAGE BY ALGORITHM MANDATORY PARAMETER VALIDATION.

14375839

ISSUES WITH ‘SECURE A MENU ITEM’ FUNCATIONALITY.

14373600

COPY OF BUG 13932646 - TRIM APPLICATION PROPERTY VALUES

14372846

THREADPOOLWORKER DOES NOT SHUTDOWN WHEN KILLED THROUGH JMX

14368577

COPY OF 14368514 - COPY OF 14211260 - ONBLUR JAVASCRIPT EVENT IS NOT TRIGGERED

14368496

COPY OF 14368493 - COPY OF 14316987 - ODM, MDM: UI HINTS ISSUE - ORAINVOKEBS IS

14368197

REFRESHING PORTAL IN FIREFOX ADDS A BLANK LINE IN THE PORTAL

14367510

COPY OF 14367501 - COPY OF 14367480 - COPY OF 14352708 - GF5:ODM: DECLAREBO IS G

14366575

XAI SENDER CONFIGURATION NOT UPDATED IN REGISTRY

14366384

ENABLE JMX FOR UCP

14364539

CMA:-DUPLICATING FW OWNED MIGRATING REQUEST THROWS OWNER OF Z1-SECURITYCONFIG D

14364433

CMA-BATCH THROWS EXCEPTION WHEN EXPORTING DATA USING "F1-SECURITYCONFIG" MIGRAT

14362456

COPY OF 14226403 - [CC&B 2.3.1]: ADD REMOVE-SAVEPOINT OPTION FOR COBOL

14358523

CMA-BATCH IS THROWING JAVA.SQL.SQLINTEGRITYCONSTRAINTVIOLATIONEXCEPTION

14358287

CMA-GETTING EXCEPTION "INPUT REQUEST FIELD EXPIRATION DATE HAS AN INVALID VALUE"

14358050

EXTERNAL SYSTEM: ENABLE/ DISABLE PROPERTY OF "XAI SENDER" FIELD NOT PROPER

14357888

CI_DB_INSTR - OWNER FLAG IS NOW REQUIRED IN DB INSTRUCTION

14357836

FW CHANGES FOR 11698/10279307 MOD

14355026

COPY OF 14154392 - TPW BATCH JOBS FAIL TO FINISH

14354995

COPY OF 14349978 - OM2533;HIGH;BRT NOT UPDATING CORRECTLY WHEN SUBMIT JOB ABENDS

14352124

GET MORE BUTTON IS NO ALLIGNED AS PER STANDARD

14345044

COPY OF 13586965 - REMOVE CRYSTAL REPORTS INTERFACE FROM FRAMEWORK

14338552

ODM - SNAPSHOT MISSING AFTER RECEIVED ACKNOWLEDGEMENT

14331939

XML TYPE SUPPORT FOR MIGRATION

14329567

ODM:UI HINTS ISSUE: ADDING NEW ROW FUNCTIONALITY NOT WORKING IN RECURSIVE LIST

14324978

COPY 14301157 - ERROR IN WEBSERVICE MSG ENCODING OF POLISH CHARACTERS AFTER UPGR

14323777

COPY 14323755 - APPOINTMENT PAGE IS HANGING IF FA'S DISPATCH GROUP IS LINKED TO

14319093

UI HINTS - MAPFIELD AND MDFIELD ELEMENT ATTRIBUTES SEEMS TO BE CONFLICTING

14315227

COPY OF BUG 14267759 - DYNAMIC GENERATION OF UIMAP IS NOT WORKING

14315202

ZONE HEADER IS NOT REFRESHED FOR F1-DE-SINGLE ZONE TYPE.

14305959

ZONE WITH CHECK BOXES ARE NO LONGER SELECTED AFTER NAVIGATING TO ANOTHER PAGE

14304853

ETM: CHANGE 'ALLOW SEARCH' FLAG ON CHAR TYPE TO BE CM-ABLE

14304476

ODM: SCRIPT ERROR WHEN UI AND DA NAMES ARE SAME

14303135

REQUEST TO REMOVE THE CILVFVSL SERVICE FROM FW

14300738

COPY OF 13596527 - COBOL JVMS END WITH SIGSEGV OR SIGBUS

14293247

MIG PLAN CUSTOM SEARCH FOR CONSTRAINT GETS SECURITY ERROR

14292898

COPY OF 13447624 GENERATED CONFIGLAB DRIVER PROGRAMS - UNJAACCEPTABLE RESULTS FO

14286948

COPY OF BUG 14269714 - QUERY ZONE INCORRECT ORDER BY

14286098

COPY OF 13877910 - AUTOMATION SCRIPT DATS004 IS FAILING IN THE 4.1.0.4GF WEEK 7

14286021

GETTING NULL POINTER EXCEPTION WHEN TPW STARTED IN DISTRIBUTED MODE

14282968

THE KEYSTORE PASSWORD PROPERTY EXPOSES THE PASSWORD

14282181

VALIDATION IS FAILING WHEN WE GIVE BPA SCRIPT IN BO MAIN AND LIFE CYCLE PAGE.

14278629

BAD FORMATING OF ERROR MESSAGE USING CURLY BRACKETS

14278628

COPY OF BUG 13341067 - COMPLETING TODOS USING F1-UPDATETODOENTRY DOES NOT CREATE

14278610

COPY OF BUG 12947925 ETM: SUPERVISOR USER SUMMARY

14277354

"COPY OF 14353386 - ETM: CANNOT EXPORT TO EXCEL FILE FROM A CUSTOM ZONE"

14275998

ODM: 4.2 MIGRATION: SEARCHING BY ATTACHMENTS NOT WORKING CORRECTLY

14275986

ODM: 4.2 MIGRATION: NAVIGATION IS NOW INCORRECT

14275978

ODM: 4.2 MIGRATION: UIHINTS: DROPDOWN MISBEHAVING AND PICKING DEFAULT VALUE

14275956

ODM: 4.2 MIGRATION: ATTACHMENTS MALFUNCTIONING

14275948

ODM: 4.2 MIGRATION: UIHINTS: MISSING BLANK VALUE IN DROPDOWN

14275669

DISABLEELEMENT FUNCTION NOT WORKING FOR DROPDOWN

14275137

MPL RECEIVERS DO NOT FIND THEIR SENDERS

14270378

ERROR MESSAGE NOT BEING CLEARED FROM MAP AFTER INVOKING SS

14269454

FIRST NAME AND LAST NAME FIELD METADATA CHANGES

14265844

ORAMDFIELD IS NOT WORKING FOR FIELD TYPES

14260490

IE9 : JAVA SCRIPT ERROR WHEN CLICKING DELETE ICON

14260315

ODM: BUSINESS SERVICE F1-SYNCMSTDATA NOT UPDATING RETURNED BODETAILS XML

14259390

COPY OF BUG 14225342 - LABELS ARE NOT LOADED FOR THE FIELDS ON INPUT UI MAP OF D

14257292

TRANSFORM RAW SCHEMA TO EXPANDED XML ALLOWING OUTPUT FORMAT CUSTOMIZATION

14252543

COPY OF BUG 14252542 - COPY OF BUG 14211157 - ETM: CHECK FORM FUNCTIONALITY BROK

14251420

TO DO ROLE IS REQUIRED ON THE GENERIC TO DO ENTRY CREATOR ALG

14247790

BGV: BATCH CLUSTER PAGE DISPLAYING THREADPOOL NAMES TWO TIMES

14245757

FW DOES NOT RECOGNIZE XPATH OF RAW NODE'S CHILD AS MSG PARMS

14239492

COPY OF 14239487 - COPY OF 13986892 - SYSTEM BECOMES UNRESPONSIVE RANDOM TIMES D

14239337

SCHEMA SUBSECTION OUT OF SYNC WITH THE MAIN SECTION

14238142

COPY OF BUG 14236596 - COPY OF BUG 14235346 - OM2518;EMERGENCY;OUTAGE TOOL NOT G

14237868

INCORRECT OWNER NAMES IN ERROR MESSAGE WHILE TRYING TO ADD ALGORITHM VERSIONS

14237713

ALGORITHM MANDATORY PARAMETER VALIDATION FAILS.

14231495

COPY OF 13065384 - INCORRECT JAVASCRIPT VALIDATION OF NUMBERS

14231294

ASSIGNTODOSBYTYPEMAINPAGE XML IS MISSING.

14230092

BATCH JOB SUBMISSION DOES NOT SAVE MORE THAN 50 PARMS

14227538

UI HINTS - DETAILED DESCRIPTION INCORRECT DISPLAY USING MAX CHARS

14222098

REMOVE CCB-SPECIFIC F1_SVC_TASK_CL_FLG LOOKUP VALUES

14220564

HYPERLINK FOR APPLICATION SERVICE FIELD IS NOT WORKING IN SCRIPT PAGE

14220186

UIMAP TYPE "XHTML" GENERATING HTML CODE FOR EMPTY SCHEMA

14219243

FF:JAVA SCRIPT ERROR "WINDOW.EVENT IS UNDEFINED" IS COMING

14219211

FF:JAVA SCRIPT ERROR "CLIENTDOCUMENT.STYLESHEETS[1] IS UNDEFINED" IS COMING.

14217910

COPY OF BUG 14217908 - COPY OF BUG 14217692 - CONTROL CENTRAL CURRENT

14216942

COPY OF 14158456 ISSUES WITH MAINT. AND DISPLAY UI MAPS FOR ACTIVITY TYPES AND

14216920

COPY OF 13341915 DO NOT APPLY QUERY DATA EXPLORER QUERY LIMITS IN BATCH

14214828

IN I.E 8 THE SAVE AND CANCEL BUTTONS ARE NOT VISIBLE PROPERLY

14214746

ADDING A CHARACTERISTIC WRAPS THE CHAR VAL DESCRIPTION IN THE TABLE

14208203

WEB/EJB LAYER IS NOT FULLY DEMARCATED IN REQUEST CONTEXT

14207470

TWO "SHOW EDITOR" BUTTONS FOUND FOR ANY MPL COMMAND TEXT FILED

14203985

GETTING ERROR MESSAGE AT THE TIME OF IMPORITING STATUS REASONS.

14203102

UNABLE TO EDIT THE Z1_GEOCODE_2 SCRIPT .

14202506

JAVA SCRIPT ERROR " 'NULL' IS NULL OR NOT AN OBJECT" IS COMING.

14201433

COPY OF BUG 14057377 - MDM - CONTEXT FIELD VALUE IS NOT BEING SET PROPERLY (GF4)

14200658

IE:JAVA SCRIPT ERROR "'NAVCONTEXTS.0' IS NULL OR NOT AN OBJECT" IS COMING.

14198778

BLANK AND MISSING "MAP" DERIVATION SCRIPT OUTPUT INTERPRETED DIFFERENTLY

14198682

UNIX PROCESS NOT GETTING TERMINATED WHEN SHUTDOWN MPL

14197855

ALGORITHMS CANNOT CALL SERVICE TO RETRIEVE BO OPTIONS

14193081

MASTER CONFIG MAP ISSUES

14188603

ERROR IS ENCOUNTERED WHEN ACCESSING GEOCODE ADDRESS BUSINESS SERVICE

14188468

DEFAULT TO MANGED CONTENT XSLS WHEN F1-IAF FEATURE CONFIG IS MISSING

14187832

COPY OF 14187819 - FW: USE INTLEVEL(4) COBOL COMPILER DIRECTIVE IN CO.SH

14184646

CMA- GETTING AN EXCEPTION "THE OWNER OF THE F1_BUS_OBJ ROW CANNOT BE CHANGED"

14182583

IF LAST FIELD IN OBJECT IS LOOKUP W/ BLANK VALUE STRINGOUTOFBOUNDS ERROR OCCURS

14182124

UPDATE THE TITLE LOOK AND FEEL

14181813

11165 - CCB - ATTEMPTS TO REFRESH TO DISPLAY A PERSONS RECORDS FAILS

14181776

CONFIRM DELETE POPUP HAS TOO MUCH WHITE SPACE

14179747

JAVA SCRIPT ERROR IS DISPLAYED WHEN NAVIGATE TO PARAMETER TAB(REPORT DEFINITION)

14177426

JAVA SCRIPT ERROR IS COMING WHEN WE CLICK MESSAGE IN TODO SEARCH PAGE.

14175383

COPY OF BUG 14175370 - DOWNLOAD BUTTON DOESN'T OPEN UP DOWNLOAD DIALOG BOX

14174040

COPY OF 14009210 - ROLLBACK TO SAVEPOINT ROLLSBACK MO AUDITS AS WELL

14173581

COPY OF 14077172 - STORE EXTERNAL IDS IN OUTBOUND SYNC REQUEST FOR BI EXTRACTS

14173414

CANNOT OPEN "VIEW SCHEMA" AND "VIEW SCRIPT AS TEXT" SIMULTANEOUSLY

14173232

CLEAN THE UNNECESSSARY LOG

14173078

IN FF THE DETAILS TAB PAGE IN THE MESSGAE IS NOT ALLIGNED PROPERLY

14172806

COPY OF 14105789 - ODM: POP UP INCOMPLETE DISPLAY WHILE ATTACHING ATTACHMENTS IN

14172348

COPY OF 14072846 - DEFAULTING FOR SOURCESYSTEM IN F1-SYNCREQUEST PARENT BO SHOUL

14172173

COPY OF 13998057 - ATTACHMENT LABELS NEED TO BE UPDATED

14172119

SAVE BUTTON ALWAYS ENABLED

14169276

DESCRIPTION OF ALGORITHM TYPE F1-TDCREATE NEEDS UPDATE

14168234

JS ERROR THROWN WHEN WE CLICK ON THE CLEAR FILTERS IN THE FILTER UI MAP ZONE

14167607

JAVA SCRIPT IS ERROR COMING WHEN WE TRY CLICK ANY ZONE IN PORTAL.

14166359

CMA:ERORR MESSAGE IN LOG TAB PAGE AT THE TIME OF EXPORT IS NOT HELPFUL.

14165785

COPY OF 14165774 - COPY OF 13646497 - ETM: APPLICATION RESTART AFTER DB CONNECTI

14165555

THE SEVER HAS ENCOUNTED A PROBLEM ERROR WHEN UIHINT NAME SPACE IS OMMITED.

14164513

BUILD PRE-BUILT MIGRATION PLANS FOR CMA

14162067

COPY OF 14116770 - ATTACHMENT FILE NAME VALIDATION IS NOT CASE SENSITIVE.

14161148

COPY OF 13092441 - ISSUE AN ERROR WHEN A USER ATTEMPTS TO ADD AND DOESN'T HAVE S

14161042

SCHEDULER DAEMON IS DISABLED AFTER DB ERROR

14156235

COPY OF 14142345 RENAME "VIEW UI MAP" ZONE HEADER, UI MAP PREVIEW ISSUES

14156135

COPY OF 14068498 - CSV UPLOAD DOES NOT WORK FOR POLISH LOCALES

14154450

ORAAFTERLOAD FUNCTION DOES NOT PERMIT PARAMETERS

14148677

COPY OF BUG 14148675 - COPY OF BUG 14119401 -ODM DEPENDENTS WITH MULTIPLE VALUES

14142904

COPY 13815615 - XAI SENDER UNEXPECTED IOEXCEPTION RESPONSE CODE 202

14142734

COPY OF BUG 13443403 - DATETIME FORMAT CONVERSION ISSUE USING JMS QUE

14139725

BUSINESS OBJECT LIFE CYCLE OPTION TYPES ARE NOT VALIDATING WHEN WE GIVE ARBITARY

14128764

COPY OF 13387574: MAKE CENTRAL REPOSITORY'S ORA-ERROR MESSAGES MORE EXPLICIT

14128617

OSB TRANSPORTS

14125798

JAVA SCRIPT ERROR IS COMING WHEN WE TRY TO SEARCH FOR ALGORITHMS

14122025

COPY OF BUG 14052981 - ODM: FIREFOX : PIE CHART NOT VISIBLE IN FIREFOX

14119316

MAKE MIG PLAN AND MIG REQUEST BUNDLE-ABLE

14119262

IMPORT MOVE BY NAME BUSINESS SERVICE FROM MWM

14119199

CLEAN UP DUPLICATE MOS FOR SERVICES

14119079

INFO STRING FONT IN BUNDLE IMPORT AND BUNDLE EXPORT IS NOT AS PER STANDARD

14115190

CMA ZONES CONTAINING USER OBJECTS GET SYSTEM ERROR

14114768

COPY OF 13975543 - NO SUCH METHODE ERROR WHILE ACCESSING WSDL URL.

14112651

ODM:UI HINTS: ISSUES RELATED TO UI HINTS

14109410

COPY BUG 14014460 - FW COMPONENT TO SUPPORT OPA 10.4

14108117

ETM: TEMPLATE USER NOT WORKING FOR FAVORITE SCRIPTS

14106678

IE9 JAVA SCRIPT ERROR IS DISPLAYED WHEN CLICKING ON COPY BUTTON ON SCRIPT PAGE

14105443

CMA:'PRIMARY KEY 1 FIELD' IS MISSING MSG WHEN DUPLICATE MIG REQ AND CHG SEL TYPE

14104598

COPY OF 14066551 - COPY OF 14055292 - ETM: AFTER APPLYING PATCH 13397408, CUSTOM

14104580

COPY OF 14103613 - COPY OF 13899582 - ETM: AFTER APPLYING PATCH 13563830, COLLEC

14104086

SUPPORT FOR ORADISPLAYNONE WITHIN UIHINT FRAMEWORK

14103555

FKREF RELATED CONTROLS IN UIHINTS

14101681

SEARCH ICON IS BELOW THE OBJECT NAME

14101671

CMA: MASTER CONFIGURATION BO IS NOT ACCEPTING LONG FILE PATHS FOR IMPORT AND EXP

14100095

COPY OF 13983174 - ELIGIBLE SCRIPTS ZONE DISPLAYS SCRIPT THAT SHOULD NOT BE USER

14098363

COPY OF 14088232 - COPY OF 14023346 - DAYLIGHT SAVINGS CONVERSION FOR EUROPEAN T

14097649

CMA:EXPORT FUNCTIONALITY IS NOT WORKING WHEN WE TRY TO EXPORT STATUS REASONS

14097217

CMA: MIGRATION PLAN INSTRUCTIONS ARE NOT DISPLAYING AS PER INSTRUCTION SEQUENCE.

14096531

DATABASE TAGS ARE NOT SET ON THE EXECUTION OF THE SERVICE SCRIPT

14095431

ADA: CMA: FRAME-3 VIOLATION IN MIGRATION PLAN DISPLAY MAP.

14095282

ADA: CMA:FORM 3 VIOLATION IN MIGRATION PLAN MAINTENANCE MAP

14095067

COPY OF 13776695 - GEOCODING SERVICE DOES NOT RETURN ENOUGH INFORMATION

14091617

DATA BASE TAGS ARE NOT SET WHEN READ OPERATION ON BO USING BPA SCRIPT.

14091519

CLIENT_INFO IS NOT SET WHEN DELETE ACTION IS PERFORMED

14090425

COPY OF 14073599 - ATTACHMENT INFO PAGE IS NOT REFRESHED AFTER VIEWING AN EXISTI

14084870

ON FIELD PAGE FIELD NAME INPUT & SEARCH ICON IS NOT ALIGNED WITH OTHER ELEMENTS

14081241

COPY OF 14071432 - OM02489, FSTE KB_CMPREMUP#074- UC4 THINKS THE JOB IS STILL RU

14081137

JAVA SCRIPT ERROR THROWN WHEN WE TRY TO ADD A STEP IN SCRIPT

14077832

COPY OF 14077795 - BATCH: AIX EXIT JVM ON OOM & REMOVE NO PROP FILE ON CPATH MES

14076652

NOT ALL SQL PARAMETER TRACING ENABLED IN 4.2.0

14071627

COPY OF 14013309: REDUCE UPDATES TO CLOB COLUMNS

14071075

JS ERROR ENCOUNTERED WHEN TRYING TO DELETE SCRIPT STEPS

14071030

EXPORT IS FAILING WHEN WE CHANGE PHYSICAL BO IN MIGRATION PLAN

14066573

SIZING/SCROLLING ISSUES WITH DASHBOARD AND DASHBOARD ZONE

14063869

COPY OF 14021786 - THREADITERATION STRATEGY PROCESSES ALL WORKUNITS IN ONE THREA

14063568

COPY OF BUG 13926961 - TO DO TYPE DESCRIPTION FOR F1-SYNTD NOT USER FRIENDLY

14055561

MIGRATION OF NON-EXISTENT FW OBJECT CAUSES ISSUES

14055424

CANNOT APPLY CHANGES - NO DEFAULT STATUS FOUND

14054231

INSERT DATA IS FAILING AT THE TIME OF IMPORT

14052782

COPY OF 14052773 - FILTER VALUES CARRIED ACROSS MULTIPLE QUERY ZONES

14050346

Z1: ERROR OCCURRED WHILE CALLING JAVA FROM COBOL PROGRAM CIPETBLR

14045917

COPY OF 13903878 - UI MAP?S ORADOWNLOADDATA DOES NOT WORK FOR POLISH LOCALES

14045728

MIGRATION DATA SET TRANSACTIONS ZONE IS NOT DISPLAYING ALL TRANSACTION DETAILS

14045652

COPY OF 14042324 - PORTALS ARE NOT LOADING AFTER APPLYING RECENT PATCHES IN 4.1.

14045648

COPY OF 13466435 - JAVASCRIPT ERROR USING UPDATEABLE GRIDS ON FILTER MAPS

14044559

COPY OF 13591673 - CLEAN UP XSD/OUAF AND OUAF LOCAL/LEGAL TIME CONVERSIONS TO BE

14044380

COPY OF 14021725 - NPE DELETING BO FROM XAI IN FORMATCONVERSIONS.CONVERTOUAFSTAN

14044333

COPY OF 13542160 - BATCH SCHEDULER DAEMON THROWS MAXIMUM OPEN CURSORS EXCEEDED

14042994

WEB SERVICE ADAPTER 'ADD USER LOG' DIALOGUE INCLUDES PROMPT FOR LOG TYPE

14040907

INCORRECT FIELDS HIGHLIGHTED IN RED

14037363

CANNOT EXPORT CM DATA USING SQL PROCESSOR OR SQL SELECT

14034749

COPY OF 14031573 - EXCEPTION IN ZONE DISPLAY

14032569

OBJECT IS NOT MOVING FROM PENDING STATUS TO ERROR STATUS IF WE PASS INVALID VALU

14028399

CMA:IMPORT IS FAILING WHEN WE TRY TO IMPORT DATA RELATED TO MESSAGE .

14026227

00384 - PORTAL PERSONALIZATION

14025198

[FF] IN ‘BO-LIFE CYCLE’ TAB, HEIGHT OF THE ‘STATUS’ PAGE IS LOW.

14023045

GENERATE ALL LOOKUP CLASSES TO MAKE PATCHING EASIER

14022939

COPY OF 13932471 - COPY OF 13928484 - VIEW SCHEMA LINK DOES NOT WORK AFTER GF4 (

14022320

REPLACE DATA EXPLORER EXPRESSION / MATH ENGINE

14016835

COPY OF BUG 13476649 - REQUEST FOR TO DO LIST TO SORT BY THE EXTRA INFORMATION

14016795

MULTIPLE THREADPOOLWORKERS DOESN'T START CONCURRENTLY

14012053

COPY OF 13967442 - DEFAULT IN SCHEMA DOESN'T ALWAYS WORK IN UI MAP ON ADD

14011926

IN IE : MISSING LABELS IN BATCH SUBMISSION PAGE OF ARABIC ENVIRONMENT

14010774

COPY OF 13896202 - ODM: ISSUE WITH CONTEXT MENU AFTER GF4

14003497

RECORD ACTION STYLE ISSUE - NO PADDING TOP OR BOTTOM TO ACCOUNT FOR BUTTON WRAP

14001829

COPY OF 14001759 - TIGHTEN TPW STARTUP TO AVOID POTENTIAL NPE

13999979

VIEW DATA AREA IS THROWING "ERROR 500--INTERNAL SERVER ERROR"

13993426

INFO DATA EXPLORER WORKLIST WITH SEPARATE LISTDESC NOT PROCESSED

13985585

COPY OF 12853123 - EMBEDDED QUOTES ARE STRIPPED OFF IN BS/SS CALLS FROM BPA

13982688

FOR NEW SCRIPT CHANGE THE DEFAULT FROM "USER INVOCABLE" TO "USER NOT INVOCABLE"

13981217

LOADING USER GROUP PAGE GIVES ERROR "WEB SERVER DID NOT RESPOND CORRECTLY"

13980740

ZONES IN CONTROL CENTRAL ARE NOT LOADED

13972662

COPY OF 13856874 - COPY OF 13591144 - ERROR MESSAGE DURING THE STARTUP OF CCB V2

13965581

COPY OF 13482874 - ETM: DUPLICATION OF C1-FORMUPLOADSTAGINGTYPE BO FAILED WITH

13965575

COPY OF 13114325 - EXCEPTION IN PORTALINFOREPOSITORY CAN CAUSE CACHE TO BE EMPTY

13965554

COPY OF BUG 13964449 - ADD F1-SYNCREQUESTMO BO IN FRAMEWORK

13965175

COPY OF 13466795 ADVANCED LOGGER CRASHES WHEN FASTUPDATE IS USED

13965150

COPY OF 13716542 CANNOT CALL BASE METHOD GETREFERENCINGCONSTRAINTS FROM CM CODE

13957277

ADDRESS BUILDER FOR UI MAPS

13956934

COPY OF 12880545: FORTIFY HEADER MANIPULATION CHANGES

13954235

COPY OF BUG 13949969 - DELETE F1-SYNCRQALERT FROM FRAMEWORK

13953537

COPY OF BUG 13338099 - INCONSTANT TIME FORMAT SHOWN IN SEARCH QUERY FILTER DISPL

13951108

COPY OF 13950880: ERROR WHEN UPDATING PRIMARY KEY

13946270

COPY OF 13683925 - COPY OF 13472371 - DF 1149 CONFIGLAB: V2.3 CI_BSEG_SQ - MULTI

13942037

COPY OF 13867642: MOVE BY NAME API TREATING GROUPS AS FIELDS

13941868

MULTI SELECT BPA THROWS ERROR ON FOR LOOP

13938958

COPY OF BUG 9726218 - DATA EXPLORER RESET ZONE DOES NOT SUPPOR FILTER AREA UI MA

13938838

COPY OF BUG 13000552 - 00376 - INFRASTRUCTURE FOR COMMON ATTACHMENTS

13936840

COPY OF 13920317 - ELIGIBLE SCRIPTS ZONE DISPLAYS SCRIPT THAT SHOULD NOT BE USER

13936594

SEARCH ZONE FOR BO CODE ON MIG PLAN SHOULD INCLUDE MO

13935601

NAVIGATION TO PORTAL DOESN'T CHANGE ID

13928083

SHOW TRACE CAUSES JS ERROR - INVALID ARGUMENT

13927814

OUAFUIHINTSSCHEMAVALIDATOR INCORRECTLY INVALIDATES CUSTOM NAMESPACE ATTRIBUTE.

13922812

MAKE HOUSE_TYPE2 FW OWNED AND HOUSE_TYPE CUSTOMIZABLE

13922446

STATIC ANALYSIS : PRIVACY VIOLATION - 2

13922080

STATIC ANALYSIS :JS OPEN REDIRECT

13920215

XLIF_PARSE.PLX NEEDS TO BE CHANGED TO PASS DATABASE DETAILS

13919751

NEWLANG.PLX NEEDS TO BE CHANGED TO RUN IN SILENT MODE

13899961

SOME NON-TRANSLATABLE DATA APPEARING IN THE "STRINGS EXCEEDING CAPACITY" PAGE

13899835

ALLOW A BO READ TO OUTPUT EMPTY ELEMENTS

13898609

REVIEW TRANSLATION STRINGS EXCEEDING CAPACITY OF 70% AND TAKE ACTIONS

13897409

COPY OF 13738834 - F1-CHVAL SEARCH ZONE DOES NOT RETURN ANY VALUE

13896878

UITS031 FAILING IN 4.2

13896865

UITS022 FAILING IN 4.2

13896834

UITS022 FAILING IN 4.2

13896785

UITS013 FAILING IN 4.2

13894288

PORTAL ZONE GETTING NULLPOINTEREXCEPTION AT PORTAL.USERZONE.GETWIDTH

13891289

DUPLICATE KEY ISSUE WHILE CREATING A NEW BO

13890858

AUTOMATION TEST SCRIPT "XAITS011" IS FAILING DUE TO SCRIPT PROBLEM

13889492

CALENDAR ICON - INCORRECT DISPLAY ON OLD UI PAGES

13886287

COPY OF 13584527 - IN A ZONE THE ORDER BY DOESNOT WORKS EXCEPT FOR THE FIRST COL

13885850

COPY OF 12944751 - FW DOES NOT PREVENT 'DUPLICATE' JAVA FIELD NAMES FOR LOOKUP

13873450

CREATE GENERIC DATA AREA FOR OUTBOUND MESSAGE

13872757

ADD DASHBOARD ZONE FOR VIEWING BO SCHEMA BASED DISPLAY AND MAINTENANCE MAP

13863622

BRING CITY_UPR, ADDRESS1_UPR AND DESCR_UPR TO FW

13863599

INCREASE SIZE OF CITY, COUNTY, CITY_UPR FROM VARCHAR2(30) TO VARCHAR2(90)

13860764

AUTOMAITON SCRIPT GNTS007 IS FAILING ON 4.2_SPRINT2 BUILD

13860445

AUTOMAITON SCRIPT DATS004 IS FAILING ON 4.2_SPRINT2 BUILD

13857178

RECORD INFO SECTIONS NEEDED ON DISPLAY MAPS

13857143

COULD NOT DELETE A MIGRATION PLAN INSTRUCTION

13850331

CMA- CANCEL BUTTON IN MIGRATION DATA SET IMPORT PAGE IS NOT WORKING AS EXPECTED.

13847164

SET DESCRIPTION AREA = FALSE ON CMA AND BUNDLING ZONES.

13841865

CALENDAR POPUPS ARE GETTING NAN WHEN DATETIME FIELD IS BLANK

13841527

HANDLE NULL POINTER EXCEPTION (NPE) WHEN PARENT RECORD IS ARCHIVED

13834559

COPY OF BUG 13103827 - ALGORITHM PAGE PARAMETER ISSUES

13834469

COPY OF 13697445 MULTIPLE MOS USING THE SAME SERVICE

13831533

ADA-MDM: DATA EXPLORER QUERY ZONE CREATES QUERY FILTER - HAS TABLE-6 VIOLATION

13830270

IE CANNOT DOWNLOAD XMLTOCSVDATASERVLET

13825465

COPY OF 13825452 - COPY OF 13627400 - ERROR MESSAGE IS DISPLAYED WHEN ¿ENTER¿ IS

13823461

{INFO}ALGORITHM PARAMETER REQUIRED VALIDATION IS NOT TRIGGEREDIN THE LETTER EXTR

13817348

COPY OF 13714692 - ORASELECT TABLE ATTRIBUTE ONLY WORKS FOR STRING PRIMARY KEYS

13817341

COPY OF 13510533 - OM02318;MEDIUM; GLOBAL CONTEXT APPENDED TO THE FAVORITES URL

13815625

COPY OF BUG 13693133 - FILENAME TO CONTAIN EITHER THE OUTBOUND MESSAGE ID OR THE

13808660

COPY OF 13719119 - PRE-DEFINED CHAR TYPE REQUIRES AT LEAST ONE VALUE

13802837

COPY OF 13481000 RELATED TO DO COUNT MISMATCH

13800910

COPY OF 13790920 - STATIC ANALYSIS : SQL INJECTION - 3

13800271

CONCURRENCY ERROR AFTER WARNING SUCH AS USING REVISION CONTROL WITH CHECKOUT.

13796275

COPY OF 13796271 - COPY OF 13796080 - DEFER MO AUDIT UNTIL COMMIT

13795884

COPY OF 13791563 - ADD USER EXIT IN TPW & BATCH SCRIPTS FOR SETTING VARIABLES

13789048

F1-SYNCRQSTL ZONE ONLY SUPPORTS TO DO ENTRIES AS RELATED FK CHARS ON THE MO LOG

13785291

COPY OF 13785287 - COPY OF 13703447 - ORANAVIGATE ISSUE

13783053

COPY OF 12952592 MATCH EVENT PAGE REACHING MAXIMUM NUMBER OF CHANGES

13780052

COPY BUG 13606758 - DECIMAL FORMAT SUPPORT FOR MDM EXTRACTORS

13775225

00394 -ISSUES WITH DATABASE HEALTH CHECK HIGH IMPACT QUERIES

13774824

COPY OF 13743297 - COPY OF 13610157 - XAI SENDS WRONG FAULT MESSAGE, WHEN CANNOT

13772421

CMA- SEARCH FUNCTIONALITY IS NOT WORKING IN MIGRATION PLAN - DESCRIPTION.

13771599

MIG REQ SEQUENCE NUMBERS SHOULD BE HIDDEN AND AUTO-CREATED

13768805

COPY OF 13538242 - ETM WEB SERVER CONNECTS DIRECTLY TO DB

13742197

CMA-ERROR-SOURCE ENVIRONMENT REFERENCE FIELD MISSING IS COMING IN EXPORT

13740703

CMA- PARENT INSTRUCTION SEQUENCE IS NOT BLANK OUT IN MIGRATION PLAN

13736451

COPY OF 13592429 - USER FILTERS ARE NOT SHOWN PROPERLY ON PORTAL ZONE

13736366

COPY OF 13542447 - TIMELINE ZONE - TAX ROLE ALGORITHMS ISSUE

13734472

REMOVE SYSTEM PASWORD FROM CDXDBI

13734333

RENAME OWNERORASCHUPG.EXE FILE TO ORASCHUPG.EXE

13731235

IN FF EXPORT TO EXCELOPTION OF ZONE IS THROWING AN ERROR FOR DATE USER FILTER

13730909

COPY OF BUG 11842096 -ETM : ADVANCED DEBUGGER TRACE DOES NOT SHOW EXECUTION TIME

13730165

COPY OF 13684647 - WAM - REQUEST SEARCH ZONE FOR OUTBOUND MESSAGE TYPE

13726254

COPY OF 12878725 - CACHEABLE HTTPS RESPONSE

13726242

COPY OF 13403263 - BATCH JOB TERMINATES BECAUSE SESSION VARIABLES NOT SET PROPER

13724517

COPY OF 13640425 - NULL POINTER EXCEPTION WHEN WE EDIT THE SEQUENCE NUMBER IN FE

13721912

CMA-MIGRATION PLAN SEARCH ICON IS NOT AVAILABLE IN MIGRATION REQUEST

13721336

CMA-TRAVERSALCRITERIA DROP DOWN SHOULD BE DISABLE IF INSTRUCTION TYPE IS PRIMARY

13715318

COPY OF 13572162 - FIX THE SERVICE TASK SYSTEM DATA DESCRIPTIONS

13710352

COPY BUG 13040804 - ERROR IN WAS LOGS COULDN'T RETRIEVE SESSION OUAF SECURITY TO

13710294

COPY OF 13624926 - COPY OF 13397408 - CONCURRENT UPDATE ISSUE FOR PERSON

13710096

COPY OF 13695127 - MASTER CONFIGURATION DERVIVED SS DOES NOT INVOKE DISPLAY MAP

13707336

COPY OF BUG 12651672 - FIREFOX: XAI DYNAMIC SUBMISSION NOT WORKING

13705095

COPY BUG 11736915 - ETM: 40120 - BANKRUTPCY QUERY NAVIGATION ISSUES

13691490

COPY OF 13558811 - ALIGNMENT AND PLACEMENT OF VEW SCHEMA / XSD LINKS

13690609

COPY OF 13035973 - MESSAGE RETURNED FOR SQL ERROR PROVIDES DETAIL WHICH COULD PE

13689499

COPY OF 13647602 - COPY OF 13563830 - AFTER APPLYING PATCH 12330214, COLLECTION

13689420

COPY- BUG 13058866 - COMPOSITE INDEX NEEDS TO BE CREATED ON F1_SYNC_REQ_IN_REL_O

13689225

COPY OF 13530438 - COPY OF 13502466 - PATCH 13009443 / THE EXPORT TO EXCEL FUNCT

13656477

REMOVE LONG DESCRIPTION ON LOOKUP WHEN PURPOSE IS TRANSLATION CONTEXT

13656311

MAINT_OBJ_SEVT_FLG INCORRECTLY MARKED AS NOT TRANSLATABLE

13655686

COPY OF 13599828: CACHE INITIALCONTEXT

13654764

CMA - MIGRATION PLAN SEARCH ZONE IS CHECKING CASE(LOWER AND UPPER CASE)

13654234

CMA-SPRINT1- HELP ICON IS NEEDED IN MIGRATION PLAN MAINTENANCE UI MAP SQL TRAVER

13649561

COPY OF 13368597 - "IMPORT BUNDLE" SHOWING INCORRECT INFORMATION WHILE IMPORTING

13649303

COPY OF 13108177 ETM23_ESA:TAX:VIEW SCHEMA & VIEW XSD APPEARS UNTRANSLATED

13644914

COPY OF 13418766 - AFTER APPLYING PATCHES, EXPORT TO EXCEL DOES NOT WORK

13644337

COPY OF 13567456 - UIHINT NAMESPACE IN BO SCHEMA IS STRIPPED OFF DERIVED OBJECT

13641615

COPY OF 9720316 - COBOL: NILOBJECT DOES NOT UNDERSTAND CLOSE

13640669

COPY OF 13634933 - CHILD JVM'S DO NOT RECYCLE

13637218

COPY BUG 13366648 - IN TABLE WHEN ONLY ONE CELL VALUE IS CHANGED ONCHANGE IS FIR

13631410

COPY BUG 13056557 - WPTG_TBT:GBU:DNT:Q&A192105 - 1:TRANSLATABLE WORDS IN STUDLYC

13631130

COPY BUG 13024297 - TWO "SHOW EDITOR" BUTTONS FOUND FOR XAI COMMAND TEXT FILED

13609318

OUTBOUNDMESSAGEDISPATCHER FAILS TO INVOKE THE BO PRE-PROCESS ALGORITHM

13607001

COPY OF 13606925 - SEPARATION OF USER EVENT HANDLERS VS FW EVENT HANDLERS IN UI

13604511

COPY OF 13597029 - INCORRECT/NAVIGATION TO PORTAL FROM TREE

13603563

APP VIEWER POP-UP NOT DISPLAYING TRANSLATED COPYRIGHT MESSAGE

13602567

COPY OF 13473484 - COPY OF 13103648 - SMCP00361: CONTEXT MENUS IN THE GENERAL IN

13599991

COPY OF 13600138: SCRIPT ELEMENTTEXT METHOD CALL BROKEN

13595587

COPY BUG - BUG 13546316 - DESCRIPTION INPUT FIELD LENGTH - SEARCH NAVIGATION KEY

13594404

COPY OF 13594368 - RTL: FW NOT RENDERING PROPERLY IN RTL ENVIRONMENTS

13594111

COPY OF 10127456 - MDM_20_AR:4101:TEST SUPPORT FOR RIGHT-TO-LEFT LANGUAGES IN UI

13592364

COPY OF 13592354 CLEAN UP XSD/OUAF AND OUAF LOCAL/LEGAL TIME CONVERSIONS TO BE C

13586162

COPY OF 13547016 - APPLICATION SERVICE FIELD MISSING IN BUSINESS SERVICE PAGE

13583247

COPY OF 13582265 - COPY OF 13453642 - CONFIGLAB: V2.3 MISSING RI CHECK USER GROU

13583087

ETM23_ESA: DEFAULT TO DO ROLE F1_DFLT NOT TRANSLATED IN ESA REGION

13582546

COPY OF 13402954 - USE BO PORTAL NAVIGATION OPTION FOR CHARACTERISTIC FK NAVIGAT

13582511

COPY OF 12880507: FORTIFY RACE CONDITIONS

13579610

COPY OF 13546170 - MESSAGE TEXT IS INCORRECT AND CONFUSING

13578376

COPY OF 13345594 - COPY OF 9935226 - RECEIVING WARN (HOST.SQL.COBOLSQLPARAMMETA

13577597

COPY OF 13147038 - COPY OF 12874950 - IMPROVE NEXT BATCH NBR HANDLING AFTER TPW

13577109

COPY OF 12612081: PERF POOR RESPONSE TIME FOR TODO SUMMARY PAGE

13575475

COPY OF 9665763 - MWM - HTML FORMATTING IN INFO STRING CAUSES INCORRECT RENDERIN

13575454

COPY OF 13535530 - THE PAGE DOES NOT LOAD SUCCESFULLY WHEN ORAINVOKEBO IS USED

13575426

COPY OF 13494544 - 'UNKNOWN' VALUE IS COMING IN SEASONAL TIME SHIFT GRID

13575412

COPY OF 13473266 - "VIEW XSD" LINK ON "DATA AREA" IS NOT WORKING.

13575336

COPY OF 13445845 - ADA: VIOLATION TABLE-6 THIS LAYOUT TABLE COULD BE CONFUSED FO

13575006

COPY OF 13559592 - UIHINT NAMESPACE IN BO SCHEMA IS CAUSING DYNAMIC MAP GENERATO

13574562

ZONE FILTER: INITIALLY COLLAPSED ZONE - FILTER DESCRIPTION AREA

13571817

COPY OF 13418754 - PRINT BUTTON DOES NOT WORK IN SOME CASES

13571577

COPY OF 13513515 : TAB 'TOOLTIP' REPEATS WHEN CURRENTLY SELECTED TAB IS CLICKED

13570658

COPY OF 13388129 - F1-CHVAL SEARCH ZONE RETURNS DESCRIPTION FOR ALL LANGUAGE

13570505

COPY OF 12541643 - ADA: UI MAP EXTENSIONS - GENERATED UI MAP IS NOT ADA COMPLAIN

13570497

COPY OF 12730073 - FW: TIMELINE NOT DISPLAYING PROPERLY IN FIREFOX

13570492

COPY OF 13395670 - UNABLE TO OPEN APPLICATION VIEWER AND SCRIPT ERROR

13570488

COPY OF 13417035 - ETM: INCORRECT VALUE/FORMAT OF HTML "ID" ATTRIBUTE UPON UI MA

13568265

ETM23_ESA: FIX THE SEARCH TYPE 'ALTERNATE' DESCRIPTIONS TO ADD SPACE BEFORE NBR

13567430

COPY OF 13567408 - COPY OF 13557410 - CANNOT DISPLAY ERROR MESSAGE ON NOTIFICATI

13564963

UNABLE TO SAVE IN BO STATUS REASON CHARACTERISTIC TABLE AS SEQ_NUM IS NOT SET

13557716

COPY OF 12663414 - UNABLE TO RETRIEVE OLD/NEW VALUES FOR COMPARISON WHILE SAVING

13557314

COPY OF 13498430 - OM02326;CRITICAL;USER INFO. NOT RETRIEVED WHEN USING LOWER CA

13511356

COPY BUG 13511352 - COPY BUG 13409281 - ZONE AUTOREFRESH CAUSES CHILD DE SEARCH

13509930

COPY OF 13494682 - COPY OF 13494493 - ADD NEW FEATURE CONFIG TO EXTRACT DATA SOU

13477260

COPY OF 13477249 - COPY OF 12747604 - PERSON IN CURRENT CONTEXT NOT REFRESHED WH

13475839

COPY OF 13417640-JAVASCRIPT ERROR WHEN WE CLICK ANY EXISTING TODO

13458988

ONLY LAST ZONE IN SEQUENCE AUTOREFRESHES IF REFRESH INTERVAL THE SAME

13444026

ADD INDEX ON CI_AUDIT TO ENABLE SEARCH ON SECOND PART OF THE PRIME KEY

13440752

ECTRANSL - GERMAN - TOOL TIP TEXT IS NOT TRANSLATED CORRECTLY

13423423

NOT GIVING PROPER MESSAGE IN CREATING ENTITY IN BUNDLE EXPORT

13420230

REQUEST TIMELINE ZONE TO HAVE THE FUSION STYLESHEET

13409135

ORPHAN MENU DATA RELATED TO NOTIFICATION DETECTED BY F1-FKVBP

13408944

ORPHAN SCRIPT DA RECORD DETECTED BY F1-FKVBP

13400386

JAVA SCRIPT ERROR IN SEARCH PORTAL ZONE WHEN WE SWITCH BETWEEN QUERY OPTIONS

13385782

ENHANCE DEBUGGER FOR JAVA TO JAVA CALLS

13329819

FW_AP_INIDATA.SQL MAY NEEDS TO BE CORRECTED IN FW410

13323576

JAVASCRIPT PERFORMANCE ISSUE

13146264

HOVERING OVER A MENU WITH NO SUBMENU SHOWS SUBMENU OF ADJACENT ENTRY

13103489

ISSUES WITH METADATA FOR ALGORITHM TYPE F1-GEN-BOMNJ

13092910

BUNDLE AND REQUEST MAINTENANCE SHOULD BE UPDATED TO FUSION LOOK

13012360

FW - MOUSE OVER TEXT DISPLAYS ERROR EXTRA VALUES

13011324

FIREFOX: BPA SCRIPT: ON STEPS TAB SCROLL BAR IS NOT WORKING CORRECTLY

12995176

UNWANTED BLANK AREA AT BOTTOM ON THE HOME PAGE

12986080

GIVING JAVA SCRIPT ERROR ON SCRIPT STEP PAGE

12978055

ALLOW NAVIGATION USAGE = GO TO IN NAV OPTIONS OF TYPE= SCRIPT

12967097

RUSSIAN LANGUAGE PACK DOES NOT DISPLAY ADMIN MENU CORRECTLY.

12839851

CCB 2.3.1 INSTALLATION: ERROR AFTER FW INSTALL STEP

12722396

FIREFOX: UNNECCESSARY SCROLL BARS ARE COMING IN DASHBOARD PAGE

12632389

00273 ABILITY TO SECURE A MENU ITEM THAT IS CM'ABLE

12555620

COMMON.JS DISABLE/ENABLEELEMENT FUNCTIONS DON'T WORK

12549655

ENHANCING SUPERVISOR TO DO ASSIGNMENT

12325528

WPTG_TMS_LT_T13Y:CNTXT:Q&A183122:MDM_201:CONTEXT ISSUE - MEANING OF ITEM

10298108

ADD REMOVAL OF UNUSED APPLICATION SERVICES TO THE DB HEALTH SCRIPTS

10262953

00336 ADD OPA WSDL SEARCH TO WEB SERVICE

9306387

SEVERAL DISPLAY ICONS OWNED BY F1 SHOULD BE PUSHED TO THE EDGE PRODUCTS

9272999

ETM REQUEST FOR MORE MEANINGFUL MESSAGE IS FBH AND FUS LOG

9266466

BI PUBLISHER NEED BILL TO BE DISPLAYED IN PDF FORMAT

8805940

2245:INVALID TR - TO DO ENTRIES < DAYS OLD SHOULD BE GREEN...

License and Copyright Notices

This section provides license and copyright information for the associated products. This includes the following:

•

Notice Concerning Usage of ANTLR

•

Notice Concerning Usage of Apache Software

•

Notice Concerning Usage of ASM

•

Notice Concerning Usage of Concurrent

•

Notice Concerning Usage of DOM4J

•

Notice Concerning Usage of International Components for Unicode (ICU4J)

•

Notice Concerning Usage of Jaxen

•

Notice Concerning Usage of JCIP Annotations

•

Notice Concerning Usage of SLF4J

•

Notice Concerning Usage of Staxmate

•

Notice Concerning Usage of XMLPULL

•

Notice Concerning Usage of XMLUnit

•

Notice Concerning Usage of XStream

•

Notice Concerning Usage of YUI

Third-Party Products

The following sections provide notices and information about the third party products indicated.

Notice Concerning Usage of ANTLR

[The BSD License]

Copyright (c) 2010 Terence Parr

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

Neither the name of the author nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

\THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Notice Concerning Usage of Apache Software

The following files are covered under the Apache 2.0 license:

•

bsf-2.4.0.jar

•

castor-1.3.2-core.jar

•

castor-1.3.2-xml-schema.jar

•

castor-1.3.2-xml.jar

•

cglib-2.2.jar

•

commonj-3.7.1.jar

•

commons-beanutils-core-1.8.3.jar

•

commons-cli-1.1.jar

•

commons-codec-1.6.jar

•

commons-collections-3.2.1.jar

•

commons-fileupload-1.2.2.jar

•

commons-httpclient-3.0.1.jar

•

commons-io-1.3.2.jar

•

commons-lang-2.2.jar

•

log4j-1.2.17.jar

•

serializer-2.7.1.jar

•

stax2-2.1.jar

•

stax2-api-3.0.4.jar

•

wstx-asl-3.2.7.jar

•

xalan-mod-2.7.1.jar

•

xmlparserv2-11.1.1.3.0.jar

Apache License

Version 2.0, January 2004

http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.

3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

You must give any other recipients of the Work or Derivative Works a copy of this License; and

You must cause any modified files to carry prominent notices stating that You changed the files; and

You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and

If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.

9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

Notice Concerning Usage of ASM

Copyright (c) 2000-2005 INRIA, France Telecom

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. Neither the name of the copyright holders nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Notice Concerning Usage of Concurrent

All classes are released to the public domain and may be used for any purpose whatsoever without permission or acknowledgment. http://g.oswego.edu/dl/classes/EDU/oswego/cs/dl/util/concurrent/intro.html

Notice Concerning Usage of DOM4J

Copyright 2001-2010 (C) MetaStuff, Ltd. All Rights Reserved.

Redistribution and use of this software and associated documentation ("Software"), with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain copyright statements and notices. Redistributions must also contain a copy of this document.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. The name "DOM4J" must not be used to endorse or promote products derived from this Software without prior written permission of MetaStuff, Ltd. For written permission, please contact dom4j-info@metastuff.com.

4. Products derived from this Software may not be called "DOM4J" nor may "DOM4J" appear in their names without prior written permission of MetaStuff, Ltd. DOM4J is a registered trademark of MetaStuff, Ltd.

5. Due credit should be given to the DOM4J Project - http://dom4j.sourceforge.net

THIS SOFTWARE IS PROVIDED BY METASTUFF, LTD. AND CONTRIBUTORS

``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL METASTUFF, LTD. OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Notice Concerning Usage of International Components for Unicode (ICU4J)

COPYRIGHT AND PERMISSION NOTICE

Copyright (c) 1995-2010 International Business Machines Corporation and others

All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

Notice Concerning Usage of Jaxen

Copyright 2003-2006 The Werken Company. All Rights Reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

* Neither the name of the Jaxen Project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Notice Concerning Usage of JCIP Annotations

Attribution 2.5

CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE LEGAL SERVICES. DISTRIBUTION OF THIS LICENSE DOES NOT CREATE AN ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES REGARDING THE INFORMATION PROVIDED, AND DISCLAIMS LIABILITY FOR DAMAGES RESULTING FROM ITS USE.

License

THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS CREATIVE COMMONS PUBLIC LICENSE ("CCPL" OR "LICENSE"). THE WORK IS PROTECTED BY COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE WORK OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS PROHIBITED.

BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HERE, YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE. THE LICENSOR GRANTS YOU THE RIGHTS CONTAINED HERE IN CONSIDERATION OF YOUR ACCEPTANCE OF SUCH TERMS AND CONDITIONS.

1. Definitions

1. "Collective Work" means a work, such as a periodical issue, anthology or encyclopedia, in which the Work in its entirety in unmodified form, along with a number of other contributions, constituting separate and independent works in themselves, are assembled into a collective whole. A work that constitutes a Collective Work will not be considered a Derivative Work (as defined below) for the purposes of this License.

2. "Derivative Work" means a work based upon the Work or upon the Work and other pre-existing works, such as a translation, musical arrangement, dramatization, fictionalization, motion picture version, sound recording, art reproduction, abridgment, condensation, or any other form in which the Work may be recast, transformed, or adapted, except that a work that constitutes a Collective Work will not be considered a Derivative Work for the purpose of this License. For the avoidance of doubt, where the Work is a musical composition or sound recording, the synchronization of the Work in timed-relation with a moving image ("synching") will be considered a Derivative Work for the purpose of this License.

3. "Licensor" means the individual or entity that offers the Work under the terms of this License.

4. "Original Author" means the individual or entity who created the Work.

5. "Work" means the copyrightable work of authorship offered under the terms of this License.

6. "You" means an individual or entity exercising rights under this License who has not previously violated the terms of this License with respect to the Work, or who has received express permission from the Licensor to exercise rights under this License despite a previous violation.

2. Fair Use Rights. Nothing in this license is intended to reduce, limit, or restrict any rights arising from fair use, first sale or other limitations on the exclusive rights of the copyright owner under copyright law or other applicable laws.

3. License Grant. Subject to the terms and conditions of this License, Licensor hereby grants You a worldwide, royalty-free, non-exclusive, perpetual (for the duration of the applicable copyright) license to exercise the rights in the Work as stated below:

1. to reproduce the Work, to incorporate the Work into one or more Collective Works, and to reproduce the Work as incorporated in the Collective Works;

2. to create and reproduce Derivative Works;

3. to distribute copies or phonorecords of, display publicly, perform publicly, and perform publicly by means of a digital audio transmission the Work including as incorporated in Collective Works;

4. to distribute copies or phonorecords of, display publicly, perform publicly, and perform publicly by means of a digital audio transmission Derivative Works.

5.

For the avoidance of doubt, where the work is a musical composition:

1. Performance Royalties Under Blanket Licenses. Licensor waives the exclusive right to collect, whether individually or via a performance rights society (e.g. ASCAP, BMI, SESAC), royalties for the public performance or public digital performance (e.g. webcast) of the Work.

2. Mechanical Rights and Statutory Royalties. Licensor waives the exclusive right to collect, whether individually or via a music rights agency or designated agent (e.g. Harry Fox Agency), royalties for any phonorecord You create from the Work ("cover version") and distribute, subject to the compulsory license created by 17 USC Section 115 of the US Copyright Act (or the equivalent in other jurisdictions).

6. Webcasting Rights and Statutory Royalties. For the avoidance of doubt, where the Work is a sound recording, Licensor waives the exclusive right to collect, whether individually or via a performance-rights society (e.g. SoundExchange), royalties for the public digital performance (e.g. webcast) of the Work, subject to the compulsory license created by 17 USC Section 114 of the US Copyright Act (or the equivalent in other jurisdictions).

The above rights may be exercised in all media and formats whether now known or hereafter devised. The above rights include the right to make such modifications as are technically necessary to exercise the rights in other media and formats. All rights not expressly granted by Licensor are hereby reserved.

4. Restrictions.The license granted in Section 3 above is expressly made subject to and limited by the following restrictions:

1. You may distribute, publicly display, publicly perform, or publicly digitally perform the Work only under the terms of this License, and You must include a copy of, or the Uniform Resource Identifier for, this License with every copy or phonorecord of the Work You distribute, publicly display, publicly perform, or publicly digitally perform. You may not offer or impose any terms on the Work that alter or restrict the terms of this License or the recipients' exercise of the rights granted hereunder. You may not sublicense the Work. You must keep intact all notices that refer to this License and to the disclaimer of warranties. You may not distribute, publicly display, publicly perform, or publicly digitally perform the Work with any technological measures that control access or use of the Work in a manner inconsistent with the terms of this License Agreement. The above applies to the Work as incorporated in a Collective Work, but this does not require the Collective Work apart from the Work itself to be made subject to the terms of this License. If You create a Collective Work, upon notice from any Licensor You must, to the extent practicable, remove from the Collective Work any credit as required by clause 4(b), as requested. If You create a Derivative Work, upon notice from any Licensor You must, to the extent practicable, remove from the Derivative Work any credit as required by clause 4(b), as requested.

2. If you distribute, publicly display, publicly perform, or publicly digitally perform the Work or any Derivative Works or Collective Works, You must keep intact all copyright notices for the Work and provide, reasonable to the medium or means You are utilizing: (i) the name of the Original Author (or pseudonym, if applicable) if supplied, and/or (ii) if the Original Author and/or Licensor designate another party or parties (e.g. a sponsor institute, publishing entity, journal) for attribution in Licensor's copyright notice, terms of service or by other reasonable means, the name of such party or parties; the title of the Work if supplied; to the extent reasonably practicable, the Uniform Resource Identifier, if any, that Licensor specifies to be associated with the Work, unless such URI does not refer to the copyright notice or licensing information for the Work; and in the case of a Derivative Work, a credit identifying the use of the Work in the Derivative Work (e.g., "French translation of the Work by Original Author," or "Screenplay based on original Work by Original Author"). Such credit may be implemented in any reasonable manner; provided, however, that in the case of a Derivative Work or Collective Work, at a minimum such credit will appear where any other comparable authorship credit appears and in a manner at least as prominent as such other comparable authorship credit.

5. Representations, Warranties and Disclaimer

UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU.

6. Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

7. Termination

1. This License and the rights granted hereunder will terminate automatically upon any breach by You of the terms of this License. Individuals or entities who have received Derivative Works or Collective Works from You under this License, however, will not have their licenses terminated provided such individuals or entities remain in full compliance with those licenses. Sections 1, 2, 5, 6, 7, and 8 will survive any termination of this License.

2. Subject to the above terms and conditions, the license granted here is perpetual (for the duration of the applicable copyright in the Work). Notwithstanding the above, Licensor reserves the right to release the Work under different license terms or to stop distributing the Work at any time; provided, however that any such election will not serve to withdraw this License (or any other license that has been, or is required to be, granted under the terms of this License), and this License will continue in full force and effect unless terminated as stated above.

8. Miscellaneous

1. Each time You distribute or publicly digitally perform the Work or a Collective Work, the Licensor offers to the recipient a license to the Work on the same terms and conditions as the license granted to You under this License.

2. Each time You distribute or publicly digitally perform a Derivative Work, Licensor offers to the recipient a license to the original Work on the same terms and conditions as the license granted to You under this License.

3. If any provision of this License is invalid or unenforceable under applicable law, it shall not affect the validity or enforceability of the remainder of the terms of this License, and without further action by the parties to this agreement, such provision shall be reformed to the minimum extent necessary to make such provision valid and enforceable.

4. No term or provision of this License shall be deemed waived and no breach consented to unless such waiver or consent shall be in writing and signed by the party to be charged with such waiver or consent.

5. This License constitutes the entire agreement between the parties with respect to the Work licensed here. There are no understandings, agreements or representations with respect to the Work not specified here. Licensor shall not be bound by any additional provisions that may appear in any communication from You. This License may not be modified without the mutual written agreement of the Licensor and You.

Creative Commons is not a party to this License, and makes no warranty whatsoever in connection with the Work. Creative Commons will not be liable to You or any party on any legal theory for any damages whatsoever, including without limitation any general, special, incidental or consequential damages arising in connection to this license. Notwithstanding the foregoing two (2) sentences, if Creative Commons has expressly identified itself as the Licensor hereunder, it shall have all rights and obligations of Licensor.

Except for the limited purpose of indicating to the public that the Work is licensed under the CCPL, neither party will use the trademark "Creative Commons" or any related trademark or logo of Creative Commons without the prior written consent of Creative Commons. Any permitted use will be in compliance with Creative Commons' then-current trademark usage guidelines, as may be published on its website or otherwise made available upon request from time to time.

Creative Commons may be contacted at http://creativecommons.org/.

Notice Concerning Usage of SLF4J

SLF4J source code and binaries are distributed under the MIT license.

Copyright (c) 2004-2008 QOS.ch

All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDE "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Notice Concerning Usage of Staxmate

Copyright (c) 2007, Tatu Saloranta

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

* Neither the name of the <organization> nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY <copyright holder> ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL <copyright holder> BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Notice Concerning Usage of XMLPULL

XMLPULL API IS FREE

All of the XMLPULL API source code, compiled code, and documentation contained in this distribution *except* for tests (see separate LICENSE_TESTS.txt) are in the Public Domain.

XMLPULL API comes with NO WARRANTY or guarantee of fitness for any purpose.

Initial authors: Stefan Haustein and Aleksander Slominski

2001-12-12

Notice Concerning Usage of XMLUnit

Copyright (c) 2001-2007, Jeff Martin, Tim Bacon

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

* Neither the name of the xmlunit.sourceforge.net nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Notice Concerning Usage of XStream

Copyright (c) 2003-2006, Joe Walnes

Copyright (c) 2006-2007, XStream Committers

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of

conditions and the following disclaimer. Redistributions in binary form must reproduce

the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

Neither the name of XStream nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRE CT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Notice Concerning Usage of YUI

Copyright © 2012 Yahoo! Inc. All rights reserved.

Redistribution and use of this software in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

* Neither the name of Yahoo! Inc. nor the names of YUI's contributors may be used to endorse or promote products derived from this software without specific prior written permission of Yahoo! Inc.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.