JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Sun Ethernet Fabric Operating System

IGS Administration Guide

PDF
search filter icon
search icon

Document Information

Using This Documentation

Product Notes

Related Documentation

Acronyms and Abbreviations

CLI Command Modes

Feedback

Support and Accessibility

IGS Overview

IGS Protocol Description

Topology Example

Configuration Prerequisites

Default Settings

Configuring IGS

Enabling and Disabling IGS

Enable IGS Globally

Enable IGS on a Specific VLAN Interface

Disable IGS

Configure Multicast Forwarding Mode

Configure the IGS Version

Configuring a Multicast Router Port

Enable Multicast Router Port

Disable a Multicast Router Port

Configure the Multicast Router Port Time-Out Value

Configuring IGS Querier Settings

Enable IGS as a Querier

Configure the IGMP Snooping Query Interval

Configuring Proxy Reporting

Disable Proxy Reporting

Enable Proxy Reporting

Configuring the Port-Purge Interval

Set the Port-Purge Interval

Reset the Port-Purge Interval

Configuring Leave Processing

Enable the Fast Leave Process

Disable the Fast Leave Process

Configuring the Report Suppression Interval

Enable the Report Suppression Interval

Disable the Report Suppression Interval

Configuring the Group Query Interval Value

Set the Group Query Interval Value

Reset the Group Query Interval

Configuring the Group Retry Count Value

Set the Group Retry Count Value

Reset the Group Retry Count Value

Configuring Report Forwarding

Enable Report Forwarding

Disable Report Forwarding

Reset Report Forwarding to the Default Value

Clearing the Snooping Statistics

Clear the Statistics for a Specific VLAN

Clear the Statistics for All VLANs

Configuring the General Query Transmission Option

Enable the General Query Transmission Option

Disable the General Query Transmission Option

Display Statistics

Flow-Based Configurations

Flow-Based Configuration Example

Configuration Parameters

Configure the MAC-Based Multicast Forwarding Mode

Configure the IP-Based Multicast Forwarding Mode

Configure a Static Router Port

Configure the IGS Version

Configure Queriers in Flow-Based Configurations

Configure Proxy Reporting in Flow-Based Configurations

CLI Command Modes

The following table lists the configuration modes used in this document with their access and exit methods.

Command Mode
Access Method
Prompt
Exit Method
User EXEC
Access SEFOS from Oracle ILOM with read-only rights (privilege level 1).
SEFOS>
Use the logout or exit command to return to the Oracle ILOM prompt.
Privileged EXEC
Access SEFOS from Oracle ILOM with full administrative rights (privilege level 15).
SEFOS#
Use the logout or exit command to return to the Oracle ILOM prompt.
Global Configuration
From User EXEC mode, use the enable command.
SEFOS(config)#
Use the end command to return to Privileged EXEC mode.
Interface Configuration
From Global Configuration mode, use the interface interface-type interface-id command.
SEFOS(config-if)#
Use the exit command to return to Global Configuration mode, or use the end command to return to Privileged EXEC mode.