Configure Switch ES1-24p-1 for L3 Routing Using RIP

Configure Switch `ES1-24p-1` for L3 Routing Using RIP

Start the configuration with all ports and the default VLAN shutdown.

Disable GVRP and GMRP.

ES1-24p-1 SEFOS# configure terminal
ES1-24p-1 SEFOS(config)# set gvrp disable
ES1-24p-1 SEFOS(config)# set gmrp disable
ES1-24p-1 SEFOS(config)# set port-channel enable
ES1-24p-1 SEFOS(config)# interface vlan 1
ES1-24p-1 SEFOS(config-if)# shutdown
ES1-24p-1 SEFOS(config-if)# no ip address
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface range extreme-ethernet 0/1-24
ES1-24p-1 SEFOS(config-if-range)# shutdown
ES1-24p-1 SEFOS(config-if-range)# end

Create and enable port-channels between switches per the topology.

See L2 and L3 Topology.

ES1-24p-1 SEFOS# configure terminal
ES1-24p-1 SEFOS(config)# interface port-channel 12
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface port-channel 13
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# end

Configure VLANs manually.

You must add at least one port to the VLAN before you can assign the VLAN a name.

ES1-24p-1 SEFOS# configure terminal
ES1-24p-1 SEFOS(config)# vlan 2003
ES1-24p-1 SEFOS(config-vlan)# ports add port-channel 12 untagged port-channel 12 name 192_168_203_0_RIP_P2P
ES1-24p-1 SEFOS(config-vlan)# vlan active
ES1-24p-1 SEFOS(config-vlan)# exit
ES1-24p-1 SEFOS(config)# vlan 2004
ES1-24p-1 SEFOS(config-vlan)# ports add port-channel 13 untagged port-channel 13 name 192_168_204_0_RIP_P2P
ES1-24p-1 SEFOS(config-vlan)# vlan active
ES1-24p-1 SEFOS(config-vlan)# exit
ES1-24p-1 SEFOS(config)# vlan 50
ES1-24p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/1 untagged extreme-ethernet 0/1 name 192_168_50_0_HOST_P2P
ES1-24p-1 SEFOS(config-vlan)# vlan active
ES1-24p-1 SEFOS(config-vlan)# exit
ES1-24p-1 SEFOS(config)# vlan 100
ES1-24p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/1 name access-layer-vlan-1
ES1-24p-1 SEFOS(config-vlan)# vlan active
ES1-24p-1 SEFOS(config-vlan)# exit
ES1-24p-1 SEFOS(config)# vlan 101
ES1-24p-1 SEFOS(config-vlan)# ports add extreme-ethernet 0/1 name access-layer-vlan-2
ES1-24p-1 SEFOS(config-vlan)# vlan active
ES1-24p-1 SEFOS(config-vlan)# end

Configure the port-channels as access links by setting the pvid and adding port-channels to VLANs.

Also, disable spanning-tree on all uplinks.

ES1-24p-1 SEFOS# configure terminal
ES1-24p-1 SEFOS(config)# interface port-channel 12
ES1-24p-1 SEFOS(config-if)# switchport pvid 2003
ES1-24p-1 SEFOS(config-if)# spanning-tree disable
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface port-channel 13
ES1-24p-1 SEFOS(config-if)# switchport pvid 2004
ES1-24p-1 SEFOS(config-if)# spanning-tree disable
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# end

Add the ports to the appropriate port-channels and enable the uplink interfaces to the aggregation switches.

Configure the host port as an access link with a different VLAN.

ES1-24p-1 SEFOS# configure terminal
ES1-24p-1 SEFOS(config)# interface extreme-ethernet 0/1
ES1-24p-1 SEFOS(config-if)# description "connected to eth1 Host-1"
ES1-24p-1 SEFOS(config-if)# switchport pvid 50
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface extreme-ethernet 0/23
ES1-24p-1 SEFOS(config-if)# description "connected to ToR72p-1 on port67"
ES1-24p-1 SEFOS(config-if)# channel-group 12 mode active
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface extreme-ethernet 0/21
ES1-24p-1 SEFOS(config-if)# description "connected to ToR72p-1 on port71"
ES1-24p-1 SEFOS(config-if)# channel-group 12 mode active
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface extreme-ethernet 0/24
ES1-24p-1 SEFOS(config-if)# description "connected to ToR72p-2 on port68"
ES1-24p-1 SEFOS(config-if)# channel-group 13 mode active
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface extreme-ethernet 0/22
ES1-24p-1 SEFOS(config-if)# description "connected to ToR72p-2 on port71"
ES1-24p-1 SEFOS(config-if)# channel-group 13 mode active
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# end

Configure the L3 interface for all VLANs defined previously.

ES1-24p-1 SEFOS# configure terminal
ES1-24p-1 SEFOS(config)# interface vlan 2003
ES1-24p-1 SEFOS(config-if)# ip address 192.168.203.20 255.255.255.0
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface vlan 2004
ES1-24p-1 SEFOS(config-if)# ip address 192.168.204.20 255.255.255.0
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface vlan 50
ES1-24p-1 SEFOS(config-if)# ip address 192.168.50.10 255.255.255.0
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface vlan 100
ES1-24p-1 SEFOS(config-if)# ip address 192.168.100.10 255.255.255.0
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface vlan 101
ES1-24p-1 SEFOS(config-if)# ip address 192.168.101.10 255.255.255.0
ES1-24p-1 SEFOS(config-if)# no shutdown
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# end

Enable RIP, and advertise the networks that are reachable through this switch.

ES1-24p-1 SEFOS# configure terminal
ES1-24p-1 SEFOS(config)# router rip
ES1-24p-1 SEFOS(config-router)# version 2
ES1-24p-1 SEFOS(config-router)# auto-summary disable
ES1-24p-1 SEFOS(config-router)# redistribute connected
ES1-24p-1 SEFOS(config-router)# network 192.168.203.20
ES1-24p-1 SEFOS(config-router)# network 192.168.204.20
ES1-24p-1 SEFOS(config-router)# network 192.168.50.10
ES1-24p-1 SEFOS(config-router)# network 192.168.100.10
ES1-24p-1 SEFOS(config-router)# network 192.168.101.10
ES1-24p-1 SEFOS(config-router)# end

Enable the VLANs to send and receive RIP version 2 updates.

ES1-24p-1 SEFOS# configure terminal
ES1-24p-1 SEFOS(config)# interface vlan 2003
ES1-24p-1 SEFOS(config-if)# ip rip send version 2
ES1-24p-1 SEFOS(config-if)# ip rip receive version 2
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface vlan 2004
ES1-24p-1 SEFOS(config-if)# ip rip send version 2
ES1-24p-1 SEFOS(config-if)# ip rip receive version 2
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface vlan 50
ES1-24p-1 SEFOS(config-if)# ip rip send version 2
ES1-24p-1 SEFOS(config-if)# ip rip receive version 2
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface vlan 100
ES1-24p-1 SEFOS(config-if)# ip rip send version 2
ES1-24p-1 SEFOS(config-if)# ip rip receive version 2
ES1-24p-1 SEFOS(config-if)# exit
ES1-24p-1 SEFOS(config)# interface vlan 101
ES1-24p-1 SEFOS(config-if)# ip rip send version 2
ES1-24p-1 SEFOS(config-if)# ip rip receive version 2
ES1-24p-1 SEFOS(config-if)# end

Save the configuration.

ES1-24p-1 SEFOS# copy run start
Building configuration ...
[OK]
ES1-24p-1 SEFOS#

Verify the status of the interfaces.

ES1-24p-1 SEFOS# show interface description
 
Interface    Status   Protocol  Description                   
---------    ------   --------  -----------                   
Ex0/1        up       up        connected to eth1 Host-1
Ex0/2        down     down                          
:
:                
Ex0/20       down     down                          
Ex0/21       up       up        connected to ToR72p-1 on port71
Ex0/22       up       up        connected to ToR72p-2 on port71
Ex0/23       up       up        connected to ToR72p-1 on port67
Ex0/24       up       up        connected to ToR72p-2 on port68
po12         up       up                            
po13         up       up                            
vlan1        down     down                          
vlan2003     up       up                            
vlan2004     up       up                            
vlan50       up       up                            
vlan100      up       up                            
vlan101      up       up

Verify the routes learned.

ES1-24p-1 SEFOS# show ip route
 
Codes: C - connected, S - static, R - rip, B - bgp, O - ospf
 
R 192.168.9.0/24 [3] via 192.168.203.10
R 192.168.20.0/24 [3] via 192.168.203.10
R 192.168.30.0/24 [2] via 192.168.203.10
R 192.168.40.0/24 [4] via 192.168.203.10
C 192.168.50.0/24 is directly connected, vlan50
R 192.168.60.0/24 [3] via 192.168.203.10
C 192.168.100.0/24 is directly connected, vlan100
C 192.168.101.0/24 is directly connected, vlan101
R 192.168.150.0/24 [3] via 192.168.203.10
R 192.168.151.0/24 [3] via 192.168.203.10
R 192.168.201.0/24 [2] via 192.168.203.10
R 192.168.202.0/24 [3] via 192.168.203.10
C 192.168.203.0/24 is directly connected, vlan2003
C 192.168.204.0/24 is directly connected, vlan2004
R 192.168.205.0/24 [2] via 192.168.203.10
R 192.168.206.0/24 [3] via 192.168.203.10
R 45.45.45.0/24 [3] via 192.168.203.10
R 45.45.46.0/24 [3] via 192.168.203.10
R 45.45.47.0/24 [3] via 192.168.203.10
R 45.45.48.0/24 [3] via 192.168.203.10
R 45.45.49.0/24 [3] via 192.168.203.10
R 45.45.50.0/24 [3] via 192.168.203.10
R 45.45.51.0/24 [3] via 192.168.203.10
...

Verify the number of routes.

After IXIA sends 500 routes to the core switch, those routes are learned on this switch.

ES1-24p-1 SEFOS# show ip route summary
 
Route Source    Routes
connected         5                               
static            0                               
rip               511                             
bgp               0                               
ospf              0                               
Total             516

L2 and L3 Deployment Best Practices

Configure Switch `ES1-24p-1` for L3 Routing Using RIP

Related Information

Skip Navigation Links
Exit Print View
	Oracle Ethernet Switches L2 and L3 Deployment Best Practices