A Policy Controller Reference

This appendix lists Policy Controller reference material.

Policy Controller Specification Reference

Policy Controller adheres to the specifications listed in Table A-1.

See the Oracle Communications Service Broker Policy Controller Protocol Conformance Guide for lists of the supported protocol messages and AVPs.

Table A-1 Policy Controller Diameter-based Protocol Interfaces

Communication Category	Comments/Standard
Policy Controller	Policy Charging and Control Architecture 3GPP TS 23.203 v9.9.0 (2011-06)
AF (application function)	Policy and Charging Control Over Rx reference point (3GPP 29.214 v9.8.0 (2011-09). See Policy Controller Protocol Implementation Conformance Statement for details on the supported messages and attributes.
OCS (Online Charging System)	Policy Controller communicated with the OCS portion of your SPR/OSC using this Sy interface standard: Sy Interface based on the Diameter Protocol (3GPP TS 29.219 Release V11.2 (2012-09). See Policy Controller Protocol Implementation Conformance Statement for details on the supported messages and attributes.
PCEF (Policy Controller Enforcement Function)	Policy and charging control over Gx reference point 3GPP TS 29.212 v9.7.0 (2011-06). See Policy Controller Protocol Implementation Conformance Statement for details on the supported messages and attributes
SMSC so SME (Short Message Service Centers to Short Message Entities	Service Centres (SMSCs) to Short Message Entities (SMEs) 3GPP TR 23.039 V5.0.0 (2002-06).
SPR (Subscriber Profile Repository)	Policy Controller communicates with the SPR portion of your SPR/OCS using an Sh-like interface as the Sp reference point. For details on the Sh reference point, see Spending Limit Reporting over the Sh reference point 3GPP TS 29.329 v11.1.0 (2012-06).

Supported Gx Event-Trigger Event Values

This section lists the supported values that Policy Controller supports for Gx Event-Trigger AVP (Code 1006). You can add to this list by specifying additional values for Event-Trigger using the Service Broker Administrator Console. See "Add any Vendor-specific Values for Event-Trigger to Use as Event Triggers" for details on adding custom values. Table A-2 lists the default Event-Trigger values.

Table A-2 Supported Default Gx Event-Trigger Values

Default supported Event-Trigger AVP	Event-Trigger Value
SGSN_CHANGE	0
QOS_CHANGE	1
RAT_CHANGE	2
TFT_CHANGE	3
PLMN_CHANGE	4
LOSS_OF_BEARER	5
RECOVERY_OF_BEARER	6
IP-CAN_CHANGE	7
QOS_CHANGE_EXCEEDING_AUTHORIZATION	11
RAI_CHANGE	12
USER_LOCATION_CHANGE	13
NO_EVENT_TRIGGERS	14
OUT_OF_CREDIT	15
REALLOCATION_OF_CREDIT	16
REVALIDATION_TIMEOUT	17
UE_IP_ADDRESS_ALLOCATE	18
UE_IP_ADDRESS_RELEASE	19
DEFAULT_EPS_BEARER_QOS_CHANGE	20
AN_GW_CHANGE	21
SUCCESSFUL_RESOURCE_ALLOCATION	22
RESOURCE_MODIFICATION_REQUEST	23
PGW_TRACE_CONTROL	24
UE_TIME_ZONE_CHANGE	25
TAI_CHANGE	26
ECGI_CHANGE	27
CHARGING_CORRELATION_EXCHANGE	28
APN_AMBR_MODIFICATION_FAILURE	29
USER_CSG_INFORMATION_CHANGE	30
USAGE_REPORT	33
DEFAULT_EPS_BEARER_QOS_MODIFICATION_FAILURE	34
USER_CSG_HYBRID_SUBSCRIBED_INFORMATION_CHANGE	35
USER_CSG_HYBRID_UNSUBSCRIBED_INFORMATION_CHANGE	36
ROUTING_RULE_CHANGE	37
MAX_MBR_APN_AMBR_CHANGE	38
APPLICATION_START	39
APPLICATION_STOP	40
ADC_REVALIDATION_TIMEOUT	41