| Oracle® Application Integration Architecture Installation and Upgrade Guide for Pre-Built Integrations Release 11.5 E40086-02 |
|
|
PDF · Mobi · ePub |
| Oracle® Application Integration Architecture Installation and Upgrade Guide for Pre-Built Integrations Release 11.5 E40086-02 |
|
|
PDF · Mobi · ePub |
This chapter discusses how to configure and deploy the Oracle Design to Release Integration Pack for Agile Product Lifecycle Management for Process and Oracle Process Manufacturing (Design to Release: Agile PLM for Process - OPM PIP).
This chapter includes the following sections:
Section 26.2, "Configuring and Deploying Design to Release: Agile PLM for Process - OPM PIP"
Section 26.5, "Undeploying the Design to Release: Agile PLM for Process - OPM PIP"
The DCW screens prompt you to enter the data required for successful configuration of the Design to Release: Agile PLM for Process - OPM PIP. Enter the details of the Design to Release: Agile PLM for Process - OPM PIP screens below, take a printout and keep it ready when you run the DCW. This action enables faster and error free configuration.
All artifacts associated with the PIP infrastructure components deploy to the PIP server. This screen contains the following fields:
Table 26-1 PIP Server Details Screen Fields
| Field | Description |
|---|---|
|
Admin Host Name |
Specifies where the admin server resides. This can be a remote server or the same system where the AIA Pre-Built Integrations Installer is launched. Example: The Admin Host Name is _________________________________ |
|
Admin Port |
This is the port number on which the Weblogic Admin server is started. To find this value contact the WebLogic administrator. Example: The Admin Port is _____________________________________ |
|
Domain Name |
This is WebLogic server domain corresponding to the Admin Server. Example: The Domain Name is _______________________________ |
|
Admin User |
This value is the WebLogic admin user name. To find this value contact your WebLogic administrator. The Admin User is __________________________________ |
|
Admin Password |
This value is the WebLogic admin password. To find this value contact your WebLogic administrator. The password is _____________________________________ |
|
Managed Server |
After you enter the Admin Host Name, Admin Port and Admin User, this field populates with managed servers for the domain. Select the managed server from the list. If you are deploying the PIP to a SOA cluster, you should select the cluster name in this field. The Managed Server is _______________________________ |
|
Managed Port |
This field is automatically updated after you select the managed server. If you have configured a SOA Cluster, the SOA Cluster port appears in the list. |
Use this screen to enter details related to your Agile PLM for Process instance.
The screen contains the following fields:
Table 26-2 Agile PLM for Process Application Details Screen Fields
| Field | Description |
|---|---|
|
Agile PLM for Process Host |
Specifies the system name. Example: Agile PLM for Process Host name is _____________________________ |
|
Agile PLM for Process Port |
This is the http port. This value depends on the web server port and operating system of your Agile PLM for Process instance. To find this value, contact your Agile PLM for Process administrator. Example: Agile PLM for Process Port is _________________________________ |
|
Agile PLM for ProcessVirtual Path |
This value is the same virtual path entered during the Agile PLM for Process installation. Example: Agile PLM for ProcessVirtual Path is ______________________________ |
Use this screen to enter details related to your Oracle E-Business Suite server instance.
The screen contains the following fields:
Table 26-3 Oracle E-Business Suite Server Details Screen fields
| Field | Description |
|---|---|
|
E-Business Suite Host Name |
Specifies the fully qualified system name of the Oracle E-Business Suite application. Example: E-Business Suite fully qualified Host Name is ___________________________ |
|
E-Business Suite Port |
This value is the Oracle E-Business Suite application port. To find this value, contact your administrator. Example: E-Business Suite Port is ______________________________ |
|
E-Business Suite User Name |
To find this value, contact your administrator. E-Business Suite User Name is __________________________ |
|
E-Business Suite Password |
To find this value, contact your administrator. E-Business Suite Password is ___________________________ |
|
Workflow Business Event System Name |
This is the Workflow Business Event System Name of E-Business Suite Server. For example: Workflow Business Event System Name is _________________. This field is not used in Design to Release: Agile - EBS/PIM PIP. |
|
E-Business Suite Version |
This is a drop down list of Oracle E-Business Suite Application versions. |
Use this screen to enter details related to your Oracle E-Business Suite database instance.
The screen contains the following fields:
Table 26-4 Oracle E-Business Suite Database Details Screen Fields
| Field | Description |
|---|---|
|
E-Business Suite Database Host |
Specifies the system name. To find this value, contact the database administrator. Example: E-Business Suite Database Host is ________________________ |
|
E-Business Suite Database Port |
To find this value, contact the database administrator. Example: E-Business Suite Database Port is ________________________ |
|
E-Business Suite Database Username |
To find this value, contact the database administrator. Example: E-Business Suite Database Username is ___________________ |
|
E-Business Suite Database Password |
To find this value, contact the database administrator. E-Business Suite Database Password is ____________________ |
|
E-Business Suite Database SID (System ID) |
To find this value, contact the database administrator. Example: E-Business Suite Database SID is _________________________ |
|
Database Schema |
To find this value, contact the database administrator. Example: Database Schema is __________________________________ All the database credentials are used for creating the connection pool URL (universal resource locator) and data source URLs. |
This section discusses the PIP configuration and deployment process. There are two steps:
Configure your PIP using the deployment DCW.
Deploy the PIP to the Fusion Middleware server.
The screens that appear in the DCW prompt you to enter the data that is required for successful configuration of the Design to Release: Agile PLM for Process - OPM PIP. Keep the completed worksheets the Design to Release: Agile PLM for Process - OPM PIP screens ready before you launch the DCW.
Note:
If you are harvesting content to OER, perform the first three steps. Else start from step 4.
To configure the Design to Release: Agile PLM for Process - OPM PIP:
Navigate to /slot/emsxxxx/oracle/Middleware/user_projects/domains/soa_domain/bin/ and open setDomainEnv.sh for Linux based systems and setDomainEnv.bat for Microsoft Windows.
Replace WLS_JDBC_REMOTE_ENABLED="-Dweblogic.jdbc.remoteEnabled=false" with WLS_JDBC_REMOTE_ENABLED="-Dweblogic.jdbc.remoteEnabled=true".
Restart the server.
Navigate to <AIA_Instance>/bin and run the command source aiaenv.sh for Linux based systems and aiaenv.bat for Microsoft Windows to configure the environment.
Navigate to <AIA_HOME>/bin and run the command ./aiaconfig.sh for Linux based systems and aiaconfig.bat for Microsoft Windows.
This launches the AIA DCW.
Click Next.
Select theDesign to Release: Agile PLM for Process - OPM PIP
Click Next.
To specify PIP Server details:
Enter information related to your PIP server in the PIP Server Details screen.
Click Next.
To specify Agile PLM for Process application details:
Enter information about your Agile PLM for Process installation in the Agile PLM for Process Application Details screen.
Click Next.
To specify Oracle E-Business Suite Server details:
Enter information about your Oracle E-Business Suite Server installation in the E-Business Suite Server Details screen.
Click Next.
To specify Oracle E-Business Suite Database details:
Enter information about your Oracle E-Business Suite Database installation in the E-Business Suite Database Details screen.
Click Next.
Review the configuration information on the Configuration Summary screen.
Note:
If you want to make changes to the configuration, use the navigation pane on the left and select the screen you want to edit.
You can create a response file based on the input provided in the DCW and use it in future when you want to deploy the PIP. You can configure using the steps described in Section 26.2.2, "Configuring using the Response File". Click Save Response File and save the response file with the name and location of your choice.
Click Configure to accept the configuration.
The system displays progress of the configuration in the Configuration Progress screen.
The system displays any warnings or errors as necessary. You can review the configuration log for additional details. The configuration log location is displayed in Configuration Progress screen.
When the configuration process completes without errors, the AIA DCW displays the Configuration Complete screen.
Click Finish to close the DCW.
To configure using the response file:
Open the response file.
When you create a response file through OUI, passwords get stored as <SECURE>.
Replace the password fields with actual passwords in the response file.
Navigate to <AIA_Instance>/bin and run the command source aiaenv.sh for Linux based systems and aiaenv.bat for Microsoft Windows to configure the environment.
Navigate to <AIA_HOME>/bin and run the command ./aiaconfig.sh <Response File Location and Name> for Linux based systems and aiaconfig.bat <Response File Location and Name> for Microsoft Windows.
To deploy the PIP to Fusion Middleware server:
Navigate to <AIA_Instance>/bin and run the command source aiaenv.sh for Linux based systems and aiaenv.bat for Microsoft Windows to configure the environment.
Run the command for your platform.
Note:
When you copy and paste the command in the command line, ensure that there is space between .xml and -. Ensure that there is space between these two when you run undeployment command too.
Table 26-5 Deployment Commands for the Design to Release: Agile PLM for Process - OPM PIP
| Platform | Deployment Command |
|---|---|
|
Linux Solaris SPARC HP-UX IBM AIX Based Systems |
ant -f /<AIA_HOME>/Infrastructure/Install/AID/AIAInstallDriver.xml -DDeploymentPlan=/<AIA_HOME>/pips/PLM4PEbizOPM/DeploymentPlans/PLM4PEbizOPMDP.xml -DPropertiesFile=/<AIA_HOME>/aia_instances/<AIA_Instance_name>/config/AIAInstallProperties.xml -DSupplementaryDeploymentPlan=/<AIA_HOME>/pips/PLM4PEbizOPM/DeploymentPlans/PLM4PEbizOPMSupplementaryDP.xml -l /<AIA_HOME>/pips/PLM4PEbizOPM/DeploymentPlans/PLM4PEbizOPM.log |
|
Microsoft Windows |
ant -f \<AIA_HOME>\Infrastructure\Install\AID\AIAInstallDriver.xml -DDeploymentPlan=\<AIA_HOME>\pips\PLM4PEbizOPM\DeploymentPlans\PLM4PEbizOPMDP.xml -DPropertiesFile=\<AIA_HOME>\aia_instances\<AIA_Instance_name>\config\AIAInstallProperties.xml -DSupplementaryDeploymentPlan=\<AIA_HOME>\pips\PLM4PEbizOPM\DeploymentPlans\PLM4PEbizOPMSupplementaryDP.xml -l \<AIA_HOME>\pips\PLM4PEbizOPM\DeploymentPlans\PLM4PEbizOPM.log |
Note:
In Windows 2008, 2008 R2 and Vista, run the command prompt as an administrator (elevated mode). If the command prompt is invoked in normal mode, the PIPs are not displayed.
Review the log file in the location specified in the command to verify successful deployment.
Oracle AIA ships artifacts in AIA Lifecycle Workbench which can be used in your integrations. These artifacts are created using FMW technologies such as BPEL and Mediator and are natively supported by AIA Foundation Pack tools such as Project Lifecycle Workbench, Harvester, Deployment Generator, AIA Deployment Driver (ADD). These are called native artifacts and they include SOA artifact types such as composites, DataSources, DVM, xRef, and so on. These artifacts can be modified or new natively supported artifacts can be added using the AIA Lifecyle Workbench and a BOM.xml file can be generated.
AIA PIP development teams, most often, also require deployment of artifact types that are beyond what is supported by the Project Lifecycle Workbench and AIA Harvester. For instance, integration may require artifacts such as, Java applications, Shell Scripts, ANT based build scripts which constitute part of integration landscape in addition to the artifacts that are delivered by AIA. AIA also supports deployment of these supplementary artifacts. However, you must modify and add new non native artifacts outside AIA Lifecycle Workbench.
For more information on deploying artifacts, see Oracle Fusion Middleware Developer's Guide for Oracle Application Integration Architecture Foundation Pack, "Generating Deployment Plans and Deploying Artifacts".
Agile PLM for Process applies HTTP basic authentication to handle AIA syndication result messages by an Agile PLM for Process host account. You must add the Agile PLM for Process credential to Fusion Middleware for the HTTP basic authentication connection.
Log in to the Oracle Enterprise Manager Fusion Middleware Control.
Navigate to WebLogic Domain, soa_domain, Securities, Credentials.
Check whether the Map with name oracle.wsm.security exists in Credentials.
If it does not exist, create a Map with name oracle.wsm.security.
Create a key in oracle.wsm.security map with name PLM4P_CSSServices_BasicHttpBinding_ICSSServices. Select the type as password and enter the Agile PLM for Process host user name and password.
Click OK.
To verify the Design to Release: Agile PLM for Process - OPM PIP deployment:
Open the log files from the following location and look for warnings and error messages:
For Linux, Solaris SPARC, HP-UX and IBM AIX Based Systems: Review the install log located at <AIA_HOME>/aia_instances/<instance name>/logs to verify that the PIP is successfully installed.
For Microsoft Windows: Review the install log located at <AIA_HOME>\aia_instances\<instance name>\logs to verify that the PIP is successfully installed.
Confirm that the Design to Release: Agile PLM for Process - OPM PIP services were installed.
Navigate to the Oracle Enterprise Manager Fusion Middleware Control (http://<server name>:<port number>/em/).
Log in with the server admin user name. For access details, contact the system administrator.
Expand Farm_soa_domain, SOA, soa-infra, Default and look for the following items:
ItemEBSV2
ItemResponseEBSV2
ProductionRecipeEBS
ProductionRecipeResponseEBS
QueryResponsibilityEbizAdapter
SyncItemListEbizAdapter
SyncItemListEbizProvABCSImpl
SyncProductionRecipeListEbizProvABCSImpl
SyncRecipeListEbizAdapter
SyncSpecPLM4PAdapter
SyncSpecPLM4PReqABCSImpl
TransformAppContextEbizService
All SOA composites are protected by Global Policies provided by Foundation Pack as defined in the Security section of the Developer Guide. Additionally individual services for this PIP have locally attached security policies.
To validate locally attached security policies:
Log in to the Oracle Enterprise Manager Fusion Middleware Control.
Navigate to WebLogic Domain, soa_domain, Web Services, Policies.
Verify Service Policy attachment.
Find the service policy in the list of policies.
Click the number in Attachment Count column.
This opens Usage Analysis screen.
Change the Subject Type list box to SOA Service.
Validate that all the composites are listed with local attachment to this service policy.
Verify Client Policy attachment
Navigate back to Policies screen and find the client policy
Click the number in Attachment Count column.
This opens Usage Analysis screen.
Change the Subject Type list box to SOA Reference.
Validate that all the composites are listed with local attachment to this client policy and attached to the correct references.
Table 26-6 Service Policy Attachments for Design to Release: Agile PLM for Process – EBS OPM PIP
| Composite | Service Policy |
|---|---|
|
SyncSpecPLM4PAdapter |
oracle/wss_http_token_service_policy |
Table 26-7 HTTP Token Client Policy Attachments for Design to Release: Agile PLM for Process – EBS OPM PIP
| Composite | Reference | Client Policy |
|---|---|---|
|
SyncSpecPLM4PAdapter |
PLM4PSyncResponse |
oracle/wss_http_token_client_policy |
|
SyncItemListEbizProvABCSImpl |
ItemResponseErrorEBS |
oracle/wss_username_token_client_policy |
|
SyncProductionRecipeListEbizProvABCSImpl |
ProductionRecipeResponseErrorEBS |
oracle/wss_username_token_client_policy |
For more information about security validation, see Oracle Fusion Middleware Developer's Guide for Oracle Application Integration Architecture Foundation Pack, "Working with Security."
For PIP implementation, see Oracle Design to Release Integration Pack for Agile Product Lifecycle Management for Process and Oracle Process Manufacturing Implementation Guide.
To undeploy the PIP from Fusion Middleware Server:
Navigate to <AIA_Instance>/bin and run the command source aiaenv.sh for Linux based systems and aiaenv.bat for Microsoft Windows to configure the environment.
Run the command for your platform.
Table 26-8 Undeployment Command for the Design to Release: Agile PLM for Process - OPM PIP
| Platform | Undeployment Command |
|---|---|
|
Linux Solaris SPARC IBM AIX Based Systems. HP-UX |
ant Uninstall -f <AIA_HOME>/Infrastructure/Install/AID/AIAInstallDriver.xml -DPropertiesFile=<AIA_HOME>/aia_instances/<AIA_Instance_name>/config/AIAInstallProperties.xml -DDeploymentPlan=<AIA_HOME>/pips/PLM4PEbizOPM/DeploymentPlans/PLM4PEbizOPMUndeployDP.xml -l <AIA_HOME>/pips/PLM4PEbizOPM/DeploymentPlans/PLM4PEbizOPMUndeployDP.log |
|
Microsoft Windows |
ant Uninstall -f <AIA_HOME>\Infrastructure\Install\AID\AIAInstallDriver.xml -DPropertiesFile=<AIA_HOME>\aia_instances\<AIA_Instance_name>\config\AIAInstallProperties.xml -DDeploymentPlan=<AIA_HOME>\pips\PLM4PEbizOPM\DeploymentPlans\PLM4PEbizOPMUndeployDP.xml -l <AIA_HOME>\pips\PLM4PEbizOPM\DeploymentPlans\PLM4PEbizOPMUndeployDP.log |
Restart the SOA server.
Uninstall the PIP following the instructions in Chapter 37, "Uninstalling Oracle AIA".
|
 Copyright © 2001, 2014, Oracle and/or its affiliates. All rights reserved. Legal Notices |
|
