|
|
|
|
|
1
|
PS AC OK LED
|
AC
|
Indicates these conditions:
-
Off – No AC
power applied to this power supply.
-
Green steady on
– AC power is applied to this power supply and is
within specifications.
-
Amber steady on
– AC power is applied to this power supply and is
below 85V.
|
|
2
|
PS DC OK LED (green)
|
|
Indicates these conditions:
|
|
3
|
PS Fault LED (amber)
|
|
Indicates these conditions:
-
Off – Steady
state, no service action is required.
-
Steady on – A
fault has been detected on this power supply.
|
|
4
|
NET MGT Port Link and Activity LED (green on left)
NET MGT Port Speed LED (green on right)
|
LINK/ACT
SPD
|
Indicates these conditions:
-
Off – No link
is established.
-
Steady On – A
link is established.
-
Blinking – A
link is established and there is activity on the
port.
Indicates these conditions:
|
|
5
|
Locator LED and button (white)
|
|
Turn on the Locator LED by pressing the Locator button, or see
Locate the Server. When lit, the LED blinks
rapidly. |
|
6
|
Service Action Required LED (amber)
|
|
Under some fault conditions, individual component fault LEDs
are lit in addition to the Service Action Required LED.
|
|
7
|
Power OK LED (green)
|
|
Indicates these conditions:
-
Off – Server
is not running in its normal state. Server power might
be off. The SPM might be running.
-
Steady on –
Server is powered on and is running in its normal
operating state. No service actions are required.
-
Fast blink –
Server is running in standby mode and can be quickly
returned to full function.
-
Slow blink –
A normal but transitory activity is taking place. Slow
blinking might indicate that system diagnostics are
running or that the system is booting.
|
|
8
|
Host Ethernet Port Link/Activity LED (green)
From left to right, NET 1, NET 0, NET 3, and NET 2.
|
|
Indicates these conditions:
-
Off – No link
is established.
-
Steady On – A
link is established.
-
Blinking – A
link is established and there is activity on the
port.
|
