Contents

Title and Copyright Information

Preface

• Audience
• Documentation Accessibility
• Related Documents
• Conventions

1 Getting Started

• 1.1 Tools and Equipment Needed
• 1.2 Installation Tasks
• 1.3 Opening the Box
  • 1.3.1 Server Box Contents
• 1.4 ESD Precautions
• 1.5 Oracle Exalytics In-Memory Machine Description
  • 1.5.1 Front Panel Features
  • 1.5.2 Back Panel Features
• 1.6 Connecting the Cables
• 1.7 Connecting the Power Cords
• 1.8 Powering On the Machine
• 1.9 Connecting a Laptop to Oracle Exalytics In-Memory Machine
• 1.10 Connecting to ILOM
  • 1.10.1 Connecting to ILOM Using a Serial Connection
  • 1.10.2 Connecting to ILOM Using an Ethernet Connection
• 1.11 Powering Off the Machine

2 Introduction

• 2.1 About Oracle Exalytics In-Memory Machine
• 2.2 Hardware Configuration
• 2.3 Assigning PCIe Slots
• 2.4 Key Features
• 2.5 Environmental Specifications
• 2.6 Safety and Compliance Information

3 Installing Oracle Exalytics In-Memory Machine Into a Rack

• 3.1 Task Roadmap
• 3.2 Reviewing Rack Compatibility
• 3.3 Before You Begin
• 3.4 Disassembling the Slide-Rails
• 3.5 Installing the Mounting Brackets Onto Oracle Exalytics In-Memory Machine
• 3.6 Attaching the Slide-Rail Assemblies to the Rack
• 3.7 Installing Oracle Exalytics In-Memory Machine into the Slide-Rail Assemblies
• 3.8 Installing the Cable Management Arm
• 3.9 Verifying the Operation of the Slide Rails and CMA

4 Adding Oracle Exalytics In-Memory Machine to Your Network

• 4.1 Before You Begin
  • 4.1.1 Switch Requirements
  • 4.1.2 Cable Requirements
• 4.2 Overview of Network Ports
• 4.3 Transceiver and Optical Modules for 10 GbE Connectivity
• 4.4 Universal Host Bus Adapter (HBA) for Fibre Channel (FC) and Fibre Channel over Ethernet (FCoE) Connectivity
  • 4.4.1 Installing the Universal Host Bus Adapter
• 4.5 Default ETH0 IP Address
• 4.6 Connecting Exalytics In-Memory Machine to Your Network
• 4.7 Configuring the Network for Oracle Exalytics In-Memory Machine
  • 4.7.1 Overview
    • 4.7.1.1 InfiniBand
    • 4.7.1.2 10 GbE Interfaces
    • 4.7.1.3 1 GbE Interfaces
    • 4.7.1.4 Host Name
    • 4.7.1.5 Time
    • 4.7.1.6 Domain Name Server (DNS)
  • 4.7.2 State of the Oracle Exalytics In-Memory Machine Before Running the Script
  • 4.7.3 Running the exalytics_configure_network.sh Script
  • 4.7.4 Verifying the Configuration
• 4.8 What Next?

5 Storage Configuration

• 5.1 Overview of Disk Partitions
• 5.2 Connecting Exalytics to a Storage Area Network
  • 5.2.1 Before You Begin
    • 5.2.1.1 Cable Requirements
    • 5.2.1.2 Host Bus Adapter Features and Specifications
  • 5.2.2 Preparing for Storage Area Network (SAN) Configuration
  • 5.2.3 Connecting the Optical Cable
  • 5.2.4 Installing Diagnostic Support for the Red Hat/SUSE Linux OS (Optional)
  • 5.2.5 Verifying the Connectivity
  • 5.2.6 Completing the Setup
• 5.3 For Additional Help

6 Using Oracle Integrated Lights Out Manager (ILOM)

• 6.1 ILOM Overview
  • 6.1.1 ILOM Interfaces
• 6.2 Important Notes Before You Begin
• 6.3 Connecting to ILOM via the Network
  • 6.3.1 Connecting to the CLI
  • 6.3.2 Connecting to the Web GUI
  • 6.3.3 Launching a Remote KVM Session
• 6.4 Connecting to ILOM via a Serial Connection
• 6.5 Configuring Network Access
  • 6.5.1 Configuring ILOM IP Addresses Manually

7 Connecting Oracle Exalytics In-Memory Machine to Oracle Exadata Database Machine

• 7.1 Understanding InfiniBand Card, Cable, and Switch Firmware Requirements
  • 7.1.1 InfiniBand Card
  • 7.1.2 InfiniBand Cables
  • 7.1.3 InfiniBand Switches in the Oracle Exadata Database Machine
• 7.2 Physically Connecting the Network
  • 7.2.1 Physical Layout Considerations
  • 7.2.2 Scenario 1: Single Exalytics In-Memory Machine with Oracle Exadata Database Machine
  • 7.2.3 Scenario 2: Clustered Exalytics In-Memory Machine with Oracle Exadata Database Machine
• 7.3 Choosing a Subnet Manager
• 7.4 Configuring the InfiniBand Connection
• 7.5 Monitoring the InfiniBand Fabric
• 7.6 Checking Network Health
• 7.7 Testing the Extended Network Connectivity

8 Connecting Oracle Exalytics In-Memory Machine to Oracle Big Data Appliance

• 8.1 Hardware Requirements
• 8.2 Software Requirements
  • 8.2.1 Exalytics Version Details
  • 8.2.2 BDA Version Details
• 8.3 Physical Connectivity
• 8.4 InfiniBand Connection Validation (Layer-2)
• 8.5 IPoIB Configuration (Layer-3)
• 8.6 IPoIB Validation

9 Installing Auto Service Request (ASR) Software

• 9.1 About Oracle Auto Service Request (ASR)
• 9.2 Recommended Configuration
• 9.3 Before You Begin
• 9.4 Installing ASR Manager on a Standalone System
• 9.5 Activating Exalytics Assets Manually
• 9.6 Viewing and Verifying ASR Assets ASR Manager
• 9.7 Configuring Telemetry Sources
• 9.8 Enabling Exalytics Machine Assets in My Oracle Support
• 9.9 Sending Test Alerts
• 9.10 Fault Coverage

A Troubleshooting

• A.1 Troubleshooting the Setup
• A.2 Additional Troubleshooting Information
• A.3 Locating the Machine Serial Number