Oracle® Hierarchical Storage Manager and StorageTek QFS Software samu User Interface GuideRelease 6.0 E48431-03 |
|
 Next |
Oracle® Hierarchical Storage Manager and StorageTek QFS Software samu User Interface GuideRelease 6.0 E48431-03 |
|
Next |
samua (Display Archiver Status Screen)
abr (Enable Application Based Recovery)
add (Add Equipment to a Mounted File System)
alloc (Enable Storage Allocation on a Device)
aplease (Set Append Lease Expiration Time for a Shared File System)
aridle (Stop Archiving Gracefully)
arrerun (Restart the Archiver Non-Disruptively)
arrestart (Restart the Archiver Disruptively)
arrmarchreq (Remove Archive Requests)
arrun (Start Archiving)
arscan (Scan a File System for Unarchived Files)
arstop (Stop All Archiving Immediately)
artrace (Perform Archiver Tracing)
atime (Configure Access Time Updates for a File System)
audit (Audit Library or Library Slot)
c (Display Device Configuration Screen)
clear (Clear a Load Request for a Removable Storage Volume)
d (Display Daemon Trace Controls Screen)
def_retention (Set Default WORM Retention Time)
devlog (Set Device Logging Options)
dio_rd_consec (Limit the Number of Consecutive Direct Reads)
dio_rd_form_min (Set the Size of Well-Aligned Direct I/O Reads)
dio_rd_ill_min (Set the Size of Misaligned Direct I/O Reads)
dio_szero (Zero Uninitialized Areas of Sparse Files During Direct I/O)
dio_wr_consec (Limit the Number of Consecutive Direct Writes)
dio_wr_form_min (Set the Size of Well-Formed Direct I/O Writes)
dio_wr_ill_min (Set the Size of Misaligned Direct I/O Writes)
diskvols (Set/Clear Flags on Disk Volumes Used for Archiving)
dmr (Enable Directed Mirror Reads of Software Mirrors)
dtrace (Enable/Configure Tracing for Oracle HSM Daemons)
export (Move Removable Media to the Robotic Library's Mailbox)
f (Display File Systems Screen)
flush_behind (Set the Flush-Behind Parameter)
forcedirectio (Use Direct I/O by Default)
force_nfs_async (Force Asynchronous NFS)
g (Display Shared File System Clients)
h (Display the Help Screen)
samu Interface Controlssamu Command Prompthwm_archive (Start Archiving When the High Water Mark is Reached)
idle (Idle Device)
import (Move Removable Media from the Mailbox into the Robotic Library)
invalid (Set the Invalidate-Cache Delay for a Multi-Reader File System)
l (Display Utilization Information)
lease_timeo (Set the Unused Lease Timeout for a Shared File System)
load (Load a Cartridge into a Drive)
m (Display the Mass Storage Status Screen)
maxallocsz (Set the Maximum Allocation Size for a Shared File System)
maxpartial (Set the Maximum Partial Release Size for the File System)
meta_timeo (Set the Metadata Cache Timeout for a Shared File System)
mh_write (Turn on Multi-Host Read/Write)
min_pool (Set the Minimum Number of Shared File System Threads)
minallocsz (Set the Minimum Allocation Size for a Shared File System)
mm_stripe (Set the Metadata Stripe Width)
n (Display the Staging Status Screen)
noabr (Disable Application Based Recovery)
noalloc (Disable Storage Allocation on a Device)
noatime (Disable Access Time Updates for a File System)nodio_szero (Do Not Zero Uninitialized Areas of Sparse Files with Direct I/O)
nodmr (Disable Directed Mirror Reads of Software Mirrors)
noforcedirectio (Do Not Use Direct I/O by Default)
noforce_nfs_async (Do Not Force Asynchronous NFS)
nohwm_archive (Do Not Start Archiving at the High Water Mark)
nomh_write (Turn Off Multi-Host Read/Write)
norefresh_at_eof (Do Not Refresh at EOF in a Multi-Reader File System)
noqwrite (Disable Simultaneous Reads/Writes from Different Threads)
nosuid (Mount a File System with setuid Execution Disabled)
nosw_raid (Turn Off Software RAID Mode)
notrace (Disable File System Tracing)
o (Display the Optical Disk Status Screen)
off (Turn Off A Device)
on (Turn On A Device)
open (Open a Disk Storage Device for Reading)
p (Display the Removable Media Load Requests Screen)
partial (Set the Default Partial Release Size for the File System)
partial_stage (Set Partial Stage-Ahead Point for the File System)
priority (Set Priority in Load-Request Preview Queue)
qwrite (Enable Simultaneous Reads/Writes to a File from Different Threads)
r (Display the Removable Media Status Screen
rdlease (Set the Read Lease Time for a Shared File System)
read (Read Sectors On a Disk Storage Device)
readahead (Set The Maximum Read-Ahead Parameter)
readonly | ro (Make Device Read Only)
refresh (Set the Automatic Refresh Interval for the samu Display)
refresh_at_eof (Refresh at EOF in a Multi-Reader File System)
release (Release Archived Data Files and Disable Allocation on a Device)
remove (Move Data and Remove Equipment from a File System)
s (Display Device Status Screen)
snap (Save a Snapshot of the Current Screen to a File)
stage_flush_behind (Set the Stage Flush Behind Size)
stage_n_window (Size the Buffer for Reading Directly from Archival Media)
stclear (Clear a Stage Request)
stidle (Stop Staging as Soon as Possible)
stripe (Set the Stripe Width for a File System)
strun (Start Staging)
suid (Mount a File System with setuid Execution Enabled)
sw_raid (Turn On Software RAID Mode)
sync_meta (Synchronize File System Metadata)
t (Display Tape Drive Status Screen)
thresh (Set High and Low Watermarks)
trace (Enable File System Tracing)
u (Display Staging Queue Screen)
unavail (Make a Device Unavailable to Oracle HSM)
unload (Unload a Drive)
v (Display Robot VSN Catalog Screen)
w (Display the Pending Stage Queue Screen)
wr_throttle (Set the Maximum Size of Outstanding Writes)
writebehind (Set the Write-Behind Parameter)
wrlease (Set the Write Lease Time for a Shared File System)
:C (Display the Contents of Shared Memory at a Specified Address)
D (Display Disk Volume Dictionary Screen)
F (Display Optical Disk Label Screen)I (Display Inode Information)
J (Display the Shared Memory Segment for the Load-Request Preview Queue)
K (Display Kernel Statistics)
L (Display Shared Memory Tables and System Defaults)
M (Display Raw Shared Memory)
N (Display File System Parameters)
P (Display Active Services)
R (Display SAM-Remote Configuration Information)S (Display Raw Sector Data)
T (Display SCSI Sense Data for a Current or Specified Device)
U (Display Device Table in Human-Readable Form)
