zdiasm - diagonal format triangular solve
SUBROUTINE ZDIASM( TRANSA, M, N, UNITD, DV, ALPHA, DESCRA, * VAL, LDA, IDIAG, NDIAG, * B, LDB, BETA, C, LDC, WORK, LWORK) INTEGER TRANSA, M, N, UNITD, DESCRA(5), LDA, NDIAG, * LDB, LDC, LWORK INTEGER IDIAG(NDIAG) DOUBLE COMPLEX ALPHA, BETA DOUBLE COMPLEX DV(M), VAL(LDA,NDIAG), B(LDB,*), C(LDC,*), WORK(LWORK) SUBROUTINE ZDIASM_64( TRANSA, M, N, UNITD, DV, ALPHA, DESCRA, * VAL, LDA, IDIAG, NDIAG, * B, LDB, BETA, C, LDC, WORK, LWORK) INTEGER*8 TRANSA, M, N, UNITD, DESCRA(5), LDA, NDIAG, * LDB, LDC, LWORK INTEGER*8 IDIAG(NDIAG) DOUBLE COMPLEX ALPHA, BETA DOUBLE COMPLEX DV(M), VAL(LDA,NDIAG), B(LDB,*), C(LDC,*), WORK(LWORK) F95 INTERFACE SUBROUTINE DIASM(TRANSA, M, N, UNITD, DV, ALPHA, DESCRA, VAL, * LDA, IDIAG, NDIAG, B, LDB, BETA, C, LDC, WORK, LWORK) INTEGER TRANSA, M, NDIAG INTEGER, DIMENSION(:) :: DESCRA, IDIAG DOUBLE COMPLEX ALPHA, BETA DOUBLE COMPLEX, DIMENSION(:) :: DV DOUBLE COMPLEX, DIMENSION(:, :) :: VAL, B, C SUBROUTINE DIASM_64(TRANSA, M, N, UNITD, DV, ALPHA, DESCRA, VAL, * LDA, IDIAG, NDIAG, B, LDB, BETA, C, LDC, WORK, LWORK) INTEGER*8 TRANSA, M, NDIAG INTEGER*8, DIMENSION(:) :: DESCRA, IDIAG DOUBLE COMPLEX ALPHA, BETA DOUBLE COMPLEX, DIMENSION(:) :: DV DOUBLE COMPLEX, DIMENSION(:, :) :: VAL, B, C C INTERFACE #include <sunperf.h> void zdiasm (const int transa, const int m, const int n, const int unitd, const doublecomplex* dv, const doublecomplex* alpha, const int* descra, const doublecomplex* val, const int lda, const int* idiag, const int ndiag, const doublecomplex* b, const int ldb, const doublecomplex* beta, doublecomplex* c, const int ldc); void zdiasm_64 (const long transa, const long m, const long n, const long unitd, const doublecomplex* dv, const doublecomplex* alpha, const long* descra, const doublecomplex* val, const long lda, const long* idiag, const long ndiag, const double- complex* b, const long ldb, const doublecomplex* beta, dou- blecomplex* c, const long ldc);
Oracle Solaris Studio Performance Library zdiasm(3P)
NAME
zdiasm - diagonal format triangular solve
SYNOPSIS
SUBROUTINE ZDIASM( TRANSA, M, N, UNITD, DV, ALPHA, DESCRA,
* VAL, LDA, IDIAG, NDIAG,
* B, LDB, BETA, C, LDC, WORK, LWORK)
INTEGER TRANSA, M, N, UNITD, DESCRA(5), LDA, NDIAG,
* LDB, LDC, LWORK
INTEGER IDIAG(NDIAG)
DOUBLE COMPLEX ALPHA, BETA
DOUBLE COMPLEX DV(M), VAL(LDA,NDIAG), B(LDB,*), C(LDC,*), WORK(LWORK)
SUBROUTINE ZDIASM_64( TRANSA, M, N, UNITD, DV, ALPHA, DESCRA,
* VAL, LDA, IDIAG, NDIAG,
* B, LDB, BETA, C, LDC, WORK, LWORK)
INTEGER*8 TRANSA, M, N, UNITD, DESCRA(5), LDA, NDIAG,
* LDB, LDC, LWORK
INTEGER*8 IDIAG(NDIAG)
DOUBLE COMPLEX ALPHA, BETA
DOUBLE COMPLEX DV(M), VAL(LDA,NDIAG), B(LDB,*), C(LDC,*), WORK(LWORK)
F95 INTERFACE
SUBROUTINE DIASM(TRANSA, M, N, UNITD, DV, ALPHA, DESCRA, VAL,
* LDA, IDIAG, NDIAG, B, LDB, BETA, C, LDC, WORK, LWORK)
INTEGER TRANSA, M, NDIAG
INTEGER, DIMENSION(:) :: DESCRA, IDIAG
DOUBLE COMPLEX ALPHA, BETA
DOUBLE COMPLEX, DIMENSION(:) :: DV
DOUBLE COMPLEX, DIMENSION(:, :) :: VAL, B, C
SUBROUTINE DIASM_64(TRANSA, M, N, UNITD, DV, ALPHA, DESCRA, VAL,
* LDA, IDIAG, NDIAG, B, LDB, BETA, C, LDC, WORK, LWORK)
INTEGER*8 TRANSA, M, NDIAG
INTEGER*8, DIMENSION(:) :: DESCRA, IDIAG
DOUBLE COMPLEX ALPHA, BETA
DOUBLE COMPLEX, DIMENSION(:) :: DV
DOUBLE COMPLEX, DIMENSION(:, :) :: VAL, B, C
C INTERFACE
#include <sunperf.h>
void zdiasm (const int transa, const int m, const int n, const int
unitd, const doublecomplex* dv, const doublecomplex* alpha,
const int* descra, const doublecomplex* val, const int lda,
const int* idiag, const int ndiag, const doublecomplex* b,
const int ldb, const doublecomplex* beta, doublecomplex* c,
const int ldc);
void zdiasm_64 (const long transa, const long m, const long n, const
long unitd, const doublecomplex* dv, const doublecomplex*
alpha, const long* descra, const doublecomplex* val, const
long lda, const long* idiag, const long ndiag, const double-
complex* b, const long ldb, const doublecomplex* beta, dou-
blecomplex* c, const long ldc);
DESCRIPTION
zdiasm performs one of the matrix-matrix operations
C <- alpha op(A) B + beta C, C <-alpha D op(A) B + beta C,
C <- alpha op(A) D B + beta C,
where alpha and beta are scalars, C and B are m by n dense matrices,
D is a diagonal scaling matrix, A is a sparse m by m unit, or non-unit,
upper or lower triangular matrix represented in the diagonal format
and op( A ) is one of
op( A ) = inv(A) or op( A ) = inv(A') or op( A ) =inv(conjg( A' ))
(inv denotes matrix inverse, ' indicates matrix transpose).
ARGUMENTS
TRANSA(input) On entry, TRANSA indicates how to operate with the
sparse matrix:
0 : operate with matrix
1 : operate with transpose matrix
2 : operate with the conjugate transpose of matrix.
2 is equivalent to 1 if matrix is real.
Unchanged on exit.
M(input) On entry, M specifies the number of rows in
the matrix A. Unchanged on exit.
N(input) On entry, N specifies the number of columns in
the matrix C. Unchanged on exit.
UNITD(input) On entry, UNITD specifies the type of scaling:
1 : Identity matrix (argument DV[] is ignored)
2 : Scale on left (row scaling)
3 : Scale on right (column scaling)
4 : Automatic row scaling (see section NOTES for
further details)
Unchanged on exit.
DV(input) On entry, DV is an array of length M consisting of the
diagonal entries of the diagonal scaling matrix D.
If UNITD is 4, DV contains diagonal matrix by which
the rows have been scaled (see section NOTES for further
details). Otherwise, unchanged on exit.
ALPHA(input) On entry, ALPHA specifies the scalar alpha. Unchanged on exit.
DESCRA (input) Descriptor argument. Five element integer array:
DESCRA(1) matrix structure
0 : general
1 : symmetric (A=A')
2 : Hermitian (A= CONJG(A'))
3 : Triangular
4 : Skew(Anti)-Symmetric (A=-A')
5 : Diagonal
6 : Skew-Hermitian (A= -CONJG(A'))
Note: For the routine, DESCRA(1)=3 is only supported.
DESCRA(2) upper/lower triangular indicator
1 : lower
2 : upper
DESCRA(3) main diagonal type
0 : non-unit
1 : unit
DESCRA(4) Array base (NOT IMPLEMENTED)
0 : C/C++ compatible
1 : Fortran compatible
DESCRA(5) repeated indices? (NOT IMPLEMENTED)
0 : unknown
1 : no repeated indices
VAL(input) On entry, VAL is a two-dimensional LDA-by-NDIAG array
such that VAL(:,I) consists of non-zero elements on
diagonal IDIAG(I) of A. Diagonals in the lower triangular
part of A are padded from the top, and those in the upper
triangular part are padded from the bottom. If UNITD is 4,
VAL contains the scaled matrix D*A (see section NOTES for
further details). Otherwise, unchanged on exit.
LDA(input) On entry, LDA specifies the leading dimension of VAL
and INDX. LDA must be > MIN(M,K). Unchanged on exit.
IDIAG() On entry, IDIAG is an integer array of length NDIAG
consisting of the corresponding diagonal offsets of
the non-zero diagonals of A in VAL. Lower triangular
diagonals have negative offsets, the main diagonal
has offset 0, and upper triangular diagonals have
positive offset. Elements of IDIAG of MUST be sorted
in increasing order. Unchanged on exit.
NDIAG(input) On entry, NDIAG specifies the number of non-zero diagonals
in A. Unchanged on exit.
B (input) Array of DIMENSION ( LDB, N ).
On entry, the leading m by n part of the array B
must contain the matrix B. Unchanged on exit.
LDB (input) On entry, LDB specifies the first dimension of B as declared
in the calling (sub) program. Unchanged on exit.
BETA (input) On entry, BETA specifies the scalar beta. Unchanged on exit.
C(input/output) Array of DIMENSION ( LDC, N ).
On entry, the leading m by n part of the array C
must contain the matrix C. On exit, the array C is
overwritten.
LDC (input) On entry, LDC specifies the first dimension of C as declared
in the calling (sub) program. Unchanged on exit.
WORK(workspace) Scratch array of length LWORK.
On exit, if LWORK= -1, WORK(1) returns the optimum size
of LWORK.
LWORK (input) On entry, LWORK specifies the length of WORK array. LWORK
should be at least M.
For good performance, LWORK should generally be larger.
For optimum performance on multiple processors, LWORK
>=M*N_CPUS where N_CPUS is the maximum number of
processors available to the program.
If LWORK=0, the routine is to allocate workspace needed.
If LWORK = -1, then a workspace query is assumed; the
routine only calculates the optimum size of the WORK array,
returns this value as the first entry of the WORK array,
and no error message related to LWORK is issued by XERBLA.
SEE ALSO
Libsunperf SPARSE BLAS is parallelized with the help of OPENMP and it is
fully compatible with NIST FORTRAN Sparse Blas but the sources are different.
Libsunperf SPARSE BLAS is free of bugs found in NIST FORTRAN Sparse Blas.
Besides several new features and routines are implemented.
NIST FORTRAN Sparse Blas User's Guide available at:
http://math.nist.gov/mcsd/Staff/KRemington/fspblas/
Based on the standard proposed in
"Document for the Basic Linear Algebra Subprograms (BLAS)
Standard", University of Tennessee, Knoxville, Tennessee, 1996:
http://www.netlib.org/utk/papers/sparse.ps
NOTES/BUGS
1. No test for singularity or near-singularity is included in this rou-
tine. Such tests must be performed before calling this routine.
2. If UNITD =4, the routine scales the rows of A such that their
2-norms are one. The scaling may improve the accuracy of the computed
solution. Corresponding entries of VAL are changed only in the particu-
lar case. On return DV matrix stored as a vector contains the diagonal
matrix by which the rows have been scaled. UNITD=2 should be used for
the next calls to the routine with overwritten VAL and DV.
WORK(1)=0 on return if the scaling has been completed successfully,
otherwise WORK(1) = - i where i is the row number which 2-norm is
exactly zero.
3. If DESCRA(3)=1 and UNITD < 4, the diagonal entries are each used
with the mathematical value 1. The entries of the main diagonal in the
DIA representation of a sparse matrix do not need to be 1.0 in this
usage. They are not used by the routine in these cases. But if UNITD=4,
the unit diagonal elements MUST be referenced in the DIA representa-
tion.
4. The routine is designed so that it checks the validity of each
sparse entry given in the sparse blas representation. Entries with
incorrect indices are not used and no error message related to the
entries is issued.
The feature also provides a possibility to use the sparse matrix repre-
sentation of a general matrix A for solving triangular systems with the
upper or lower triangle of A. But DESCRA(1) MUST be equal to 3 even in
this case.
Assume that there is the sparse matrix representation a general matrix
A decomposed in the form
A = L + D + U
where L is the strictly lower triangle of A, U is the strictly upper
triangle of A, D is the diagonal matrix. Let's I denotes the identity
matrix.
Then the correspondence between the first three values of DESCRA and
the result matrix for the sparse representation of A is
DESCRA(1) DESCRA(2) DESCRA(3) RESULT
3 1 1 alpha*op(L+I)*B+beta*C
3 1 0 alpha*op(L+D)*B+beta*C
3 2 1 alpha*op(U+I)*B+beta*C
3 2 0 alpha*op(U+D)*B+beta*C
3rd Berkeley Distribution 7 Nov 2015 zdiasm(3P)