enclosure ‑completeFru

Completes the FRU replacement procedures to bring the replaced hardware online.

SYNOPSIS

enclosure ‑completeFru 
   ‑enclosure enclosure‑id‑or‑fqn
   { ‑powerCoolingModule powerCoolingModule‑fru‑number
   | ‑diskDrive diskDrive‑fru‑number
   | ‑chassis chassis‑fru‑number
   | ‑iom io‑module‑fru‑number
      [‑sasPort sasPort‑fru‑number]
   }

   [{‑sessionKey | ‑u admin‑user ‑oracleFS oracle‑fs‑system}]
   [{‑outputformat | ‑o} { text | xml }]
   [{‑timeout timeout‑in‑seconds | ‑verify | ‑usage | ‑example | ‑help}]

DESCRIPTION

In most instances, when replacing a FRU, you use Guided Maintenance, not the Oracle FS CLI. In rare instances, however, an Oracle Customer Support representative might direct you to use the FSCLI. When issuing the enclosure commands, follow the instructions that are provided to you by Oracle Customer Support.

Note: Only administrators with primary administrator, admin1, or support roles are authorized to run the enclosure ‑completeFru command.

OPTIONS

‑chassis

Specifies the FRU number for the chassis in the Drive Enclosure that was replaced. The value for the chassis is 0. The Oracle FS System brings the Drive Enclosure online by performing the following operations:

Powers up the Drive Enclosure.
Runs acceptance tests.
Restores all I/O traffic to the Drive Enclosure.

‑diskDrive

Specifies the slot number of the drive that was replaced. Values are 0 to 23 for rotating media (performance or archive). Values are 0 to 18 for SSDs.

Note: The enclosure ‑completeFru command does not bring the specified drive online. Run the enclosure ‑modify ‑acceptDrive drive-slot-number command to bring the specified drive online before finalizing the drive replacement process.

‑enclosure

Specifies the fully qualified name (FQN) or unique identifier (ID) of the Drive Enclosure to bring online. The FQN includes the chassis ID, which is displayed on the front of the Drive Enclosure.

‑iom

Specifies the FRU number for the I/O module to resume. Valid values are 0 and 1.

‑powerCoolingModule

Specifies the power cooling module that was replaced. Runs acceptance tests on the power cooling module and the Drive Enclosure. After the tests complete, places the module online. Values are 0 or 1.

‑sasPort

Specifies the SAS port on an I/O Module to resume. The ‑sasPort option must be specified with the -iom option. SAS port values are 0, 1, and 2.

GLOBAL OPTIONS FOR SUBCOMMANDS

The following global options can be used for fscli command-subcommand pairs that do not include other command-line options:

‑help: Returns the context-sensitive help for the specified subcommand.
‑usage: Returns the subcommand syntax for the given command, including all of the options that are available for the command-subcommand pair.

GLOBAL OPTIONS FOR COMMANDS

The following global options can be used for fully formed fscli commands:

‑example

Returns sample output from the specified command.

Note: To see the output in XML format, include the ‑o xml option.

‑timeout timeout-in-seconds

Specifies the length of time (timeout-in-seconds) that the command line interface waits before another command is allowed to run. If the command takes longer to run than the specified time limit, the system continues processing the command, but the command prompt is made available so that you can issue another command. If the -timeout option is omitted, the command line interface blocks until the one of the following conditions is met:

The command completes successfully.
The command returns with an error.
The session times out.

Note: Be sure to check the state of the system after initiating a long running command with the ‑timeout option. Many fscli commands run a series of underlying commands in sequence. When the timeout value is reached before all of the underlying commands have completed, the fscli command does not complete with the outstanding tasks reporting a failure status.

‑outputformat | ‑o { text | xml }: Controls the type of the output the system returns from a command. If the ‑outputformat option is not included, the format of the output defaults to simple text. If xml is provided, the output is a collection of XML elements.
Note: For XML output, if internal errors occur during command execution, each error is included in a separate <ErrorList> tag.

‑verify: Inspects the validity of the command syntax, not the semantics. Used to test the structure of a command without running the command. Does not determine whether errors would be produced if you issue a structurally correct command with the input provided.
‑sessionkey: Directs the CLI to prompt you to supply a session key when you issue the command. The CLI displays Sessionkey: as the prompt. To obtain a session key, log in with the ‑returnKey option specified. After the session is established, the session key is displayed in STDOUT. If you request a session key, the ‑sessionkey option is required syntax for all commands that are issued in a given session. In environments with more than one Oracle FS System, the session key is used to determine to which Oracle FS System to direct the command for validation. Session keys are also used to establish two or more CLI sessions when using a shared administrator account.
‑u admin-user ‑oracleFS oracle‑fs-system: Routes the command to a particular Oracle FS System for execution. This option passes the name of the administrator account to use when opening the session on the specified system. Identify a specific Oracle FS System by its IP address or by the name that is recorded in the domain name system (DNS). When logging in to the Oracle FS System using the ‑u option and the ‑oracleFS option, the fscli application prompts you for a password on the command line interface for access. The Oracle FS System and the account login information are used to authenticate the current session. Establishing a login session by specifying an Oracle FS System and an account does not change the credentials that are associated with the active sessions that are running on other clients.
Caution
Oracle recommends that you not use the Cygwin command line interface to run the fscli application on Windows platforms. If you are running the Cygwin interface and include the ‑u option as a part of the ‑list subcommand, the password for the specified account is included in the results. Exposing the password can cause a breach in security.

EXAMPLE

Task

After replacing a failed chassis, bring the drive online.

Parameters

The name of the enclosure preceded by a forward slash: /⁠⁠ENCLOSURE-01
The slot number of the replaced chassis FRU: 0

$ fscli enclosure ‑completeFru ‑enclosure /⁠⁠ENCLOSURE-01 ‑chassis 22