SAN data paths require FC connections. Single-mode and multi-mode optical fiber connections are supported on PCIe cards.
- Prerequisite:
The fibre channel (FC) data paths require 8 GbE or 16 GbE optical FC connections.
Note: The type of connection (Ethernet or FC) was defined when the Oracle FS System was ordered.
Caution
Use only the Oracle-supplied SFP modules for the external cabling.The following figure shows the SAN HBA connections from the Controllers to the customer data network.
Figure 1: SAN HBA connections to the customer data network
- Legend
1 PCIe slot 1, HBA ports for SAN connectivity (FC only) 3 PCIe slot 5, HBA ports for SAN connectivity (FC only) 2 PCIe slot 4, HBA ports for SAN connectivity (FC only)
- For SAN FC connections, connect the FC cables from the SAN FC ports on the Controllers to the customer’s SAN environment.
- Route the cables through the Controller cable management arm (CMA).
Figure 2: Controller CMA
- Legend
1 Controller back 3 CMA 2 Controller data cables