Ping 10.0.0.2 to verify the network connections between the laptop and Pilot 1.
- Prerequisites:
A laptop is connected to the NET 3 port on Pilot 1, and the laptop was connected to the NET 3 port when the Oracle FS System was powered on.
The system is powered on.
- Verify that the laptop is securely connected to the NET 3 port on Pilot 1.
A label on the chassis clearly identifies Pilot 1.
- Using the laptop that is connected to the NET 3 port on Pilot 1, ping 10.0.0.2.
A ping response indicates that the connections are valid and you can proceed with configuring and connecting the system to the customer management network.
If the ping response fails, double check that the cables are securely connected on the laptop and
Pilot 1. Additionally, verify that the TCP/IP configuration of the laptop is set to the following values:
- Address
- 10.0.0.10
- Gateway
- 10.0.0.1
- Netmask
- 255.255.255
Try to ping 10.0.0.2 again. If the ping response fails, connect the laptop to the NET 3 port on
Pilot 2 and ping 10.0.0.2. If
Pilot 2 responds to the ping, continue with the network configuration process using
Pilot 2. If the ping response fails, reconnect the laptop to the NET 3 port on
Pilot 1 and power cycle
Pilot 1. Ping 10.0.0.2. If the ping response fails, contact Oracle Customer Support.