Determine Which Drive Is Faulty
You must determine which drive is faulty before
you replace it.
- Check
to see if any System Service Required LEDs are lit or flashing.
See Interpreting LEDs.
- Visually inspect the drive to
see if any of its status LEDs are lit or flashing.
See Drive LEDs.
If the drive is faulty, replace it. See Remove a Drive or Drive Filler.
- If you are unable to identify
the faulty drive, seek further information.
See Detecting and Managing Faults.
-
Remove the faulty drive.
See Remove a Drive or Drive Filler.