System Messages: CMDTUX Catalog 7100-7199


7100	WARN: OPENINFO/CLOSEINFO/AUTO ignored for RMS entry rmsname
	Description	An entry for RMS rmsname in the RMS section of the `UBBCONFIG` file has `OPENINFO` and/or `CLOSEINFO` and/or `AUTO` but the rms entry is not associated with a resource manager (that is, `TMSNAME` is "TMS" or not specified). The `OPENINFO` and `CLOSEINFO`and`AUTO` parameter value will be ignored.
	Action	No action required.
	See Also	`ubbconfig`(5)
7101	*ERROR: RMS rmsname* specified for SRVGRP groupname with no TMS.**
	Description	A RMS entry rms rmsname is specified with group name groupname in the RMS section of the `UBBCONFIG` file but the group is not associated with a resource manager (that is, `TMSNAME` is not set).
	Action	Specify `TMSNAME` in the group which the RMS entry belongs to.
	See Also	`ubbconfig`(5)
7102	*ERROR: RMS rmsname* has TMS specified and LMID accordingly does not have TLOGDEVICE**
	Description	If any RMS on a machine has a `TMS` specified, the `TLOGEVICE` parameter in the MACHINES section must be set.
	Action	Modify the configuration file.
	See Also	`ubbconfig`(5)
7103	*ERROR: RMS rmsname* has TMS specified and LMID accordingly does not have TLOGDEVICE**
	Description	If any RMS on a machine has a `TMS` specified, the `TLOGEVICE` parameter in the MACHINES section must be set.
	Action	Modify the configuration file.
	See Also	`ubbconfig`(5)
7104	ERROR: Encryption error for OPENINFO password in RMS entry val
	Description	`tmloadcf` encountered an internal error while encrypting password provided in `OPENINFO` attribute.
	Action	Please contact Oracle Customer Support.
	See Also	7107
7104	ERROR: Re-encryption error for OPENINFO password in RMS entry val
	Description	`OPENINFO` was found encrypted in the `UBBCONFIG` file during `tmloadcf`, but an attempt to decrypt it with an old key failed.
	Action	Replace the encrypted part of `OPENINFO` with the "*****" string, and run `tmloadcf` again
	7110	*ERROR: GRPNO range must be < len* and > 0**
	Description	If the RMS entry has MRM=Y specified, and its group number is grpid. Then the group number between grpid and grpid+31 inclusive will be occupied. If grpid+31 is greater than the maximum group number the GROUPS section allowed, then it will report this error.
	Action	Specify the group number with the proper value.
	See Also	`ubbconfig`(5)
7111	*ERROR:GROUPS entry groupname has a duplicate GRPNO parameter**
	Description	If there is a server group which has MRM=Y specified and group id is groupid, then group number from groupid to groupid+31 inclusive are occupied. If other group��s group id is between roupid to groupid+31 inclusive, it will report this error.
	Action	Specify the proper group number value.
	See Also	`ubbconfig`(5)
7112	ERROR: The total number of TMSCOUNT for one group must be > 1 and <= 256
	Description	The total number of `TMSCOUNT` parameter in the RMS section for one server group must be within the proper range of values.
	Action	Make the total number of TMSCOUNT for one server group between 2 and 256 inclusive.
	See Also	`tmloadcf`(1), `ubbconfig`(5)
7113	WARN: AUTOTRAN specified with TRANTIME=0.
	Description	The RESOURCE section of the `UBBCONFIG` file has the `AUTOTRAN` parameter set to `Y` but an unlimited transaction timeout value. This can be dangerous because the automatically started transactions will not timeout in the event of failures.
	Action	It is recommended that a transaction timeout value be specified.
	See Also	`ubbconfig`(5)
7114	*ERROR:GROUPS entry groupname* has MRM specified, but does not have TMS**
	Description	When a server group has the `MRM` parameter set to `Y`, but is not associated with a resource manager (that is, `TMSNAME` is "TMS" or not specified), then it will report this error.
	Action	Specify the resource manager.
	See Also	`ubbconfig`(5)
7115	*ERROR:RMS rmsname* specified for SRVGRP groupname which has no MRM supported**
	Description	When the server group which one RMS entry belong to does not have the `MRM` parameter set to `Y`, it will report this error.
	Action	Specify MRM parameter in server group.
	See Also	`ubbconfig`(5)
7116	*ERROR: Cannot start TMS servers, error reading GROUP or RMS section"*
	Description	`tmboot` cannot read the `GROUPS` section or `RMS` section of the Tuxedo configuration file.
	Action	Verify that the environment variable `TUXCONFIG` is set correctly and exported, `TUXCONFIG` is not corrupted, and `TUXCONFIG` was propagated to all machines in MP mode.
	See Also	`tmboot`(1), `tmunloadcf`(1), `ubbconfig`(5)
7125	ERROR: Cannot allocate memory to store resource manager information.
	Description	An attempt dynamically to allocate memory from the operating system using `malloc()` to store the resource manager information specifying with '-r' option failed while building a server associating with a multiple resource managers.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
	See Also	`buildserver`(1)
7127	ERROR: TRANTIME parameter must be >= 0 and < 2147483648
	Description	The `TRANTIME` parameter was outside the allowable numeric range.
	Action	Specify a value that is 0 or greater and less than 2,147,483,648.
	See Also	`tmloadcf`(1), `ubbconfig`(5)
7128	ERROR: AUTOTRAN specified in an application with the NO_XA option.
	Description	The identifier for `AUTOTRAN` as specified in the RESOURCES section of the `UBBCONFIG` cannot be set if the `OPTIONS` in the RESOURCE section has the NO_XA option set.
	Action	Correct the incompatible value of the `UBBCONFIG` file and re-run `tmloadcf`(1).
	See Also	`ubbconfig`(5) and `tmloadcf`(1)
7129	*ERROR: Cannot boot older release site site_name* when a group is configured as `MRM` type**
	Description	When Oracle Tuxedo is running in a mixed-release MP mode environment and the slave node doesn��t support the multiple RM in one group feature, the group in slave node cannot be configured as MRM type.
	Action	Either upgrade the slave node to Tuxedo release which supports this feature, or remove the MRM attribute in the group on the slave node.
	See Also	`tmboot`(1), `ubbconfig`(5)
7130	*WARN: Resource manager with name rm_name* already specified, input ignored**
	Description	While building a server using `buildserver` with `-M` parameter, the duplicate resource manager name rm_name specified with `-r` parameter is ignored.
	Action	None
	See Also	`buildserver`(1)
7131	*WARN: Resource manager structure with name rm_structure_name* already imported, current structure ignored**
	Description	While building a server using `buildserver` with `-M` parameter, the duplicate resource manager structure rm_structure_name specified in the `RM` file is ignored and will not be imported
	Action	None
	See Also	`buildserver`(1)
7132	*WARN: Resource manager library with name rm_library_name* already included, current library ignored**
	Description	While building a server using `buildserver` with `-M` parameter, the duplicate resource manager library rm_library_name specified in the `RM` file is ignored.
	Action	None
	See Also	`buildserver`(1)
7133	WARN: number type of resource managers already specified, replace rm_name with current rm_name
	Description	While building a server using `buildserver` with `-M`parameter, the maximum allowable resource manager types is 32. If there are more than 32 types of resource manager specified using the `-r` option, the last 32 types of resource manager take effect.
	Action	None
	See Also	`buildserver`(1)
7134	*ERROR:The total number of RMS entries with AUTO=Y which belong to server group groupname* must <= 15**
	Description	In RMS section, the total number of RMS entries has the `MRM` parameter set to `Y` and belong to the same server group cannot be more than 15.
	Action	Specify the proper group number value.
	See Also	`ubbconfig`(5)
7135	ERROR: BRIDGE MAXPENDINGBYTES limit has reached
	Description	The size of pending message in BRIDGE exceed the TUXEDO limitation of `MAXPENDINGBYTES`.
	Action	Check the network status and increase the size of `MAXPENDINGBYTES` in ubbconfig file machine section.
	See Also	`ubbconfig`(5)
7136	ERROR: SPINTUNING_FACTOR must be >= 0 and <= 10000 [DESCRIPTION] The `SPINTUNING_FACTOR` parameter was outside the allowable numeric range.
Action	Specify a value that is greater than or equal to 0 and less than or equal to 10,000.
See Also	`tmloadcf`(1), `ubbconfig`(5)
7137	*ERROR: The option SPINTUNING is not allowed if the option EXALOGIC is not specified in RESOURCES section**
	Description	The option `SPINTUNING` can be set if the `OPTIONS` in the *RESOURCES section has the `EXALOGIC` option set.
	Action	Specify the option `EXALOGIC` in the *RESOURCES section if the option `SPINTUNING` is already set.
	See Also	`ubbconfig`(5)
7138	*ERROR: SPINCOUNT is not allowed if the option SPINTUNING is specified in RESOURCES section**
	Description	The identifier for `SPINCOUNT` as specified in the MACHINES section of the `UBBCONFIG` can not be set if the `OPTIONS` in the RESOURCE section has the `SPINTUNING` option set.
	Action	Remove the configuration of `SPINCOUNT` if the option `SPINTUNING` is specified in the *RESOURCES section, or remove the option `SPINTUNING` instead if the `SPINCOUNT` is needed.
	See Also	`ubbconfig`(5)
7139	*ERROR: SPINTUNING_FACTOR is not allowed if the option SPINTUNING is not specified in RESOURCES section**
	Description	The identifier for `SPINTUNING_FACTOR` as specified in the MACHINES section of the `UBBCONFIG` can be set if the `OPTIONS` in the RESOURCE section has the `SPINTUNING` option set.
	Action	Remove the configuration of `SPINTUNING_FACTOR` if the option `SPINTUNING` is not specified in the *RESOURCES section, or specify the option `SPINTUNING` instead if the `SPINTUNING_FACTOR` is needed.
	See Also	`ubbconfig`(5)
7140	ERROR: SPINTUNING_MINIDLECPU must be >= 0 and <= 100 [DESCRIPTION] The `SPINTUNING_FACTOR` parameter was outside the allowable numeric range.
Action	Specify a value that is greater than or equal to 0 and less than or equal to 100.
See Also	`tmloadcf`(1), `ubbconfig`(5)
7141	*ERROR: SPINTUNING_MINIDLECPU is not allowed if the option SPINTUNING is not specified in RESOURCES section**
	Description	The identifier for `SPINTUNING_MINIDLECPU` as specified in the MACHINES section of the `UBBCONFIG` can be set if the `OPTIONS` in the RESOURCE section has the `SPINTUNING` option set.
	Action	Remove the configuration of `SPINTUNING_MINIDLECPU` if the option `SPINTUNING` is not specified in the *RESOURCES section, or specify the option `SPINTUNING` instead if the `SPINTUNING_MINIDLECPU` is needed.
	See Also	`ubbconfig`(5)
7142	*ERROR: RDMA can only be enabled when the OPTIONS EXALOGIC is specified in RESOURCES section**
	Description	The `RDMA` option can be set only when `EXALOGIC` is specified in the `OPTIONS` parameter in the RESOURCES section of the `UBBCONFIG` file.
	Action	If the `RDMA` option is desired then the `OPTIONS` parameter must be set to `EXALOGIC` in the RESOURCES section of the `UBBCONFIG` file. If that option is not desired, the `OPTIONS` parameter must be corrected to remove the `RDMA` option.
	See Also	`ubbconfig`(5)
7143	ERROR: NETID cannot be configured if the RDMA option is set
	Description	The `NETID` parameter cannot be set if the `RDMA` option is specified in the `OPTIONS` parameter in the RESOURCES section of the `UBBCONFIG` file.
	Action	The `NETID` parameter must be removed from `NETWORK` section if the `RDMA` option is specified in the `OPTIONS` parameter in the RESOURCES section of the `UBBCONFIG` file.
	See Also	`ubbconfig`(5)
7144	ERROR: RDMADAEMONIP can only be configured when the RDMA option is set
	Description	The `RDMADAEMONIP` parameter can be set only when `RDMA` is specified in the `OPTIONS` parameter in the RESOURCES section of the `UBBCONFIG` file.
	Action	If the `RDMA` option is set in the RESOURCES section then the `RDMADAEMONIP` parameter must be set in the MACHINES section of the `UBBCONFIG` file. If that option is not set, the `RDMADAEMONIP` parameter must be removed.
	See Also	`ubbconfig`(5)
7145	ERROR: RDMADAEMONPORT can only be configured when the RDMA option is set
	Description	The `RDMADAEMONPORT` parameter can be set only when `RDMA` is specified in the `OPTIONS` parameter in the RESOURCES section of the `UBBCONFIG` file.
	Action	If the `RDMA` option is set in the RESOURCES section then the `RDMADAEMONPORT` parameter must be set in the MACHINES section of the `UBBCONFIG` file. If that option is not set, the `RDMADAEMONPORT` parameter must be removed.
	See Also	`ubbconfig`(5)
7146	ERROR: RDMADAEMONPORT must be >0 and <65536
	Description	The `RDMADAEMONPORT` parameter must be greater than or equal to 0, and less than or equal to 65535.
	Action	Specify the RDMADAEMONPORT with the proper value.
	See Also	`ubbconfig`(5)
7147	ERROR: RDMAQSIZE can only be configured when the RDMA option is set
	Description	The `RDMAQSIZE` parameter can be set only when `RDMA` is specified in the `OPTIONS` parameter in the RESOURCES section of the `UBBCONFIG` file.
	Action	If the `RDMA` option is set in the RESOURCES section then the `RDMAQSIZE` parameter can be set in the MACHINES section of the `UBBCONFIG` file. If that option is not set, the `RDMAQSIZE` parameter must be removed.
	See Also	`ubbconfig`(5)
7148	ERROR: RDMAQENTRIES can only be configured when the RDMA option is set
	Description	The `RDMAQENTRIES` parameter can be set only when `RDMA` is specified in the `OPTIONS` parameter in the RESOURCES section of the `UBBCONFIG` file.
	Action	If the `RDMA` option is set in the RESOURCES section then the `RDMAQENTRIES` parameter can be set in the MACHINES section of the `UBBCONFIG` file. If that option is not set, the `RDMAQENTRIES` parameter must be removed.
	See Also	`ubbconfig`(5)
7149	ERROR: RDMADAEMONIP must be specified for machine entry when RDMA option is set
	Description	The `RDMADAEMONIP` parameter must be set when `RDMA` is specified in the `OPTIONS` parameter in the RESOURCES section of the `UBBCONFIG` file.
	Action	If the `RDMA` option is set in the RESOURCES section then the `RDMADAEMONIP` parameter must be set in the MACHINES section of the `UBBCONFIG` file. If that option is not set, the `RDMADAEMONIP` parameter must be removed.
	See Also	`ubbconfig`(5)
7150	ERROR: RDMADAEMONPORT must be specified for machine entry when RDMA option is set
	Description	The `RDMADAEMONPORT` parameter must be set when `RDMA` is specified in the `OPTIONS` parameter in the RESOURCES section of the `UBBCONFIG` file.
	Action	If the `RDMA` option is set in the RESOURCES section then the `RDMADAEMONPORT` parameter must be set in the MACHINES section of the `UBBCONFIG` file. If that option is not set, the `RDMADAEMONPORT` parameter must be removed.
	See Also	`ubbconfig`(5)
7151	ERROR: TYPE cannot be configured when the RDMA option is set
	Description	The `TYPE` parameter cannot be set if the `RDMA` option is specified in the `OPTIONS` parameter in the RESOURCES section of the `UBBCONFIG` file.
	Action	The `TYPE` parameter must be removed from `MACHINES` section if the `RDMA` option is specified in the `OPTIONS` parameter in the RESOURCES section of the `UBBCONFIG` file.
	See Also	`ubbconfig`(5)
7152	ERROR:The RDONLY1PC option is not allowed if the EXALOGIC option is not specified in the *RESOURCES ection [DESCRIPTION]. The `RDONLY1PC` option can be specified only when the `EXALOGIC`option has been specified.
Action	Set the `EXALOGIC` option.
See Also	`ubbconfig`(5)
7153	*ERROR:The RDONLY1PC option is not allowed if the NO_XA option is also specified in the RESOURCES section [DESCRIPTION]. The `RDONLY1PC` option does not need to be specified when the code>NO_XA option has been specified.**
Action	Remove the `NO_XA` option.
See Also	`ubbconfig`(5)
7154	*ERROR:The optionflag* option is not supported on this platform [DESCRIPTION]. Some options are only supported by specific platforms.**
Action	Use the platform that supports this option.
See Also	`ubbconfig`(5)
7155	ERROR: tms_precommit xa_rollback returned error for group groupname
	Description	Oracle TUXEDO was rolling back a transaction. The resource manager returned an error when `xa_rollback was called. The XA return code was not XA_OK, XA_HEURRB, or XAER_NOTA.`
	Action	Check the error reporting mechanism for the associated resource manager.