System Messages: LIBTUX Catalog 200-299


200	ERROR: Invalid service information given
	Description	The service requested to be unadvertised is invalid.
	Action	Contact your Oracle TUXEDO system Technical Support.
	See Also	`tpunadvertise`(3c)
201	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc()` failed.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

202	ERROR: No bulletin board
	Description	The process is currently not attached to the Bulletin Board so the service cannot be offered.
	Action	Contact your Oracle TUXEDO system Technical Support.

203	ERROR: Invalid service information given, NULL name
	Description	Function called without proper parameters - null service to offer.
	Action	Contact your Oracle TUXEDO system Technical Support.

205	ERROR: Invalid service information given, function name too long
	Description	Function called with improper parameters - function name too long.
	Action	Contact your Oracle TUXEDO system Technical Support.

206	ERROR: Invalid service information given, bad function address
	Description	Function called with improper parameters - function address cannot be found.
	Action	Contact your Oracle TUXEDO system Technical Support.

210	ERROR: tmbbclean failed, couldn't find DBBL
	Description	Could not find structures/information associated with the DBBL.
	Action	Contact your Oracle TUXEDO system Technical Support.

211	ERROR: tmbbclean failed, couldn't find BBL
	Description	Could not find structures/information associated with the BBL.
	Action	Contact your Oracle TUXEDO system Technical Support.

212	ERROR: tmbbclean failed, message send/receive error
	Description	Sending of message to the BBL/DBBL to clean up and check status of local Bulletin Board failed.
	Action	Check prior messages or check if message queue is blocked. If queue is blocked, system usage could be heavy and parameters may need to be tuned.

213	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc()` failed while allocating space to store tmids.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

216	*WARN: Process pid* died; removing from BB**
	Description	The process that was attached to the BB died, so the BB is cleaning up.
	Action	No action required for BB, but you may want to investigate why the process died.

217	*WARN: pid=pid* died leaving BB locked; cleaning up**
	Description	The process that was attached to the BB died and holds a user-level semaphore, so the BB is cleaning up.
	Action	No action required for BB, but you may want to investigate why the process died.

218	ERROR: Error cleaning BB owner
	Description	An error occurred in cleaning up after a dead process. Either the slot could not be found, or a prior message indicates a semaphore error.
	Action	Contact your Oracle TUXEDO system Technical Support.

219	*WARN: Forced shutdown of client; removing from BB; workstation address 'xxx.xxx.xxx.xxx'*
	Description	This may result from shutting down a WSH when clients are connected.
	Action	None.

221	*ERROR: Error putting ENVFILE filename* into environment**
	Description	The server could not process the ENVFILE properly. This includes not being able to find, open, or read it.
	Action	Check the path of ENVFILE, and the permissions and owner of the file.
	See Also	`ubbconfig`(5)
222	ERROR: Cannot get service parms for server
	Description	The server could not process the parameters for a service specified in the TUXCONFIG file. This includes a problem with loading the information from the SERVICES section, or not understanding some of the parameters (for example, buffer types.)
	Action	Check the SERVICES section of the UBBCONFIG file for correct parameters.
	See Also	`ubbconfig`(5)
223	WARN: Duplicate server
	Description	An instantiation of this server already exists and this is a duplicate. It will exit gracefully.
	Action	Check that the server that you wish to start is correct. If the server died unexpectedly or is hung, the process needs to be killed if hung, and the bulletin board must be given time to clean up after the killed process before starting the server again.

230	ERROR: Buffer type tables not available
	Description	The process is currently not attached to the Bulletin Board so it could not access the type switch table.
	Action	Contact your Oracle TUXEDO system Technical Support.

236	*ERROR: Remote tmnwkill timed out count* secs**
	Description	The process tried to signal a remote process, and a message was sent to the bridge process on the remote side to perform the fill for it. The reply to indicate the success/failure of the operation did not return before the operation timed out.
	Action	This timeout could be a sign of network congestion, but is not a specific network failure, other than the operation did not return in time. If the network is not a problem, then the timeout is too small for the speed with which the signal request can be met.

237	ERROR: semctl err: errno = errno_val, key = key_val
	Description	The `semctl()` call failed. This is possibly due to the semaphore set being removed or differing permissions on the semaphore.
	Action	The semaphore set was somehow removed. If this does happen, the system will eventually fail. Contact your Oracle TUXEDO system Technical Support.

245	WARN: Invalid LMID specification: PMID=mid
	Description	An erroneous LMID has been specified and an attempt to locate it has failed.
	Action	Check and edit the UBBCONFIG file such that all specified LMIDs reference the correct machine.
	See Also	`ubbconfig`(5)
248	ERROR: System init function failed, Uunixerr = errno_val
	Description	The server has failed to join the application.
	Action	See surrounding messages for reasons for failure to join.
	See Also	`buildserver`(1), `servopts`(5)
250	ERROR: tpsvrinit() failed
	Description	A call to `tpsvrinit()` failed. This may easily be caused by an application-defined tpsvrinit function returning failure.
	Action	Check prior specific `tpsvrinit()` messages or the application specific messages.
	See Also	`tpsvrinit`(3c)
251	ERROR: tpsvrinit() failed with outstanding message handles
	Description	A call to `tpsvrinit()`, although returning success, failed to receive all outstanding reply messages and therefore has outstanding handles. This is probably caused by an application-defined tpsvrinit function.
	Action	Check prior specific `tpsvrinit()` messages or the application specific messages.
	See Also	`tpsvrinit`(3c)
252	WARN: Cannot synchronize with tmboot...continuing
	Description	The connection with tmboot was lost by the forking process. If on the same node where tmboot is running, the pipe with tmboot was lost and may be due to the tmboot process being killed. If on a remote node, the pipe to the TAGENT process was lost, which may be due to the TAGENT process being killed.
	Action	No action required, although the cause of tmboot/TAGENT dying should be investigated if not known.
	See Also	`tmboot`(1)
253	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc()` failed while copying the arguments to CLOPT as the server tries to join the application.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

254	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc()` failed while copying the arguments to CLOPT as the server tries to join the application.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

255	INFO: Duplicate -A option ignored
	Description	Multiple -A options were specified to the server in the CLOPT line of the UBBCONFIG file.
	Action	Check the CLOPT option in the configuration file.
	See Also	`ubbconfig`(5), `servopts`(5)
256	WARN: Queue address must be numeric
	Description	The queue address, as specified to the server through the -Q option of CLOPT, is non-numeric.
	Action	Check the address specified for the -Q option in the configuration file.
	See Also	`ubbconfig`(5), `servopts`(5)
257	WARN: Invalid lock argument, setting to PROCLOCK
	Description	The lock argument, as specified to the server through the -l option in CLOPT, is invalid. It must be one of "'t' (TEXTLOCK)," "'d' (DATALOCK)," 'b' or "'p' (PROCLOCK)." The argument is ignored and is set to 'p' for PROCLOCK.
	Action	Check the lock argument for the -l option in CLOPT in the configuration file.
	See Also	`ubbconfig`(5), `servopts`(5) in the System/T reference manual, `plock`(2) in UNIX system reference manuals
258	WARN: Memory lock plock() failed
	Description	An attempt to lock the process in core has failed. This was requested by setting the lock option, -l, on the CLOPT option to the server in the configuration file. The error can occur when the server not being run as super-user, the requested lock is already on the process, or the system is out of memory.
	Action	Make sure the server is being started as super-user (and that the tmboot process is running as super-user). If the application can run its own code (`tpsvrinit()`) first, it might also have put a lock on the process.
	See Also	`ubbconfig`(5), `servopts`(5) in the System/T reference manual, `plock`(2) in UNIX system reference manuals
259	WARN: nice() failed
	Description	An attempt to change the priority of the process has failed. This was requested by setting the -n option on the CLOPT option to the server in the configuration file. This can be caused by the option to -n being negative or greater than 39, and not super-user.
	Action	Check that the argument to the -e option of CLOPT is correct in the configuration file.
	See Also	`ubbconfig`(5), `servopts`(5) in the System/T reference manual, `nice`(2) in UNIX system reference manuals
260	WARN: Cannot open path as stderr, Uunixerr = Uunixerr
	Description	An attempt to open the file for stderr failed. This file may have been specified by the -e option on the CLOPT option to the server in the configuration file. This can be caused by the inability to access the path given as the argument to the -e option.
	Action	Check that the argument to the -e option of CLOPT is correct in the configuration file.
	See Also	`ubbconfig`(5), `servopts`(5)
261	WARN: Cannot open path as stdout: Uunixerr = Uunixerr
	Description	An attempt to open the file for stout failed. This file may have been specified by the -o option on the CLOPT option to the server in the configuration file. This can be caused by the inability to access the path given as the argument to the -o option.
	Action	Check that the argument to the -o option of CLOPT is correct in the configuration file.
	See Also	`ubbconfig`(5), `servopts`(5)
262	INFO: Standard main starting
	Description	The arguments have been successfully processed, and joining the application will continue.
	Action	No action required.

263	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc()` failed while setting up buffers to advertise the services of the application as the server tries to join the application.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

264	ERROR: Cannot set server group/id
	Description	This cannot happen because code changed to use a local variable, not a passed-in variable.
	Action	Contact your Oracle TUXEDO system Technical Support.

267	*INFO: Duplicate advertisement of service svcname* ignored**
	Description	A request to advertise the same service a second time is ignored.
	Action	Check the configuration file for multiple occurrences of the service on the -s option.
	See Also	`ubbconfig`(5), `servopts`(5)
268	ERROR: Failed to stop serving
	Description	The server did not properly shut down.
	Action	There may be prior messages to describe the problem. In any case, the BBL should clean up after the process.

270	ERROR: Restart sync error errno
	Description	An internal error occurred during a restart of a process. An acknowledgment that the process was restarted was never received.
	Action	Contact your Oracle TUXEDO system Technical Support.

271	*ERROR: System lock semop failure, key = key* (errno = errno)**
	Description	In an attempt to lock the bulletin board, a call to semop(2) failed.
	Action	Examine the value returned in the UNIX System errno, and attempt to fix the problem described by the errno. If unable to do so, contact your Oracle TUXEDO system Technical Support.

272	*ERROR: System unlock semop failure, key = key* (errno = errno)**
	Description	In an attempt to unlock the bulletin board, a call to semop(2) failed.
	Action	Examine the value returned in the UNIX System errno and attempt to fix the problem described by the errno. If unable to do so, contact your Oracle TUXEDO system Technical Support.

294	*ERROR: function: FSCONFIG not or incorrectly set*
	Description	The variable FSCONFIG is either not set or has been incorrectly set.
	Action	Check and edit the UBBCONFIG file and make sure the FSCONFIG environment variable is set correctly.
	See Also	`ubbconfig`(5)
295	*ERROR: funcname: corrupted VTOC or different release*
	Description	An attempt to access the VTOC has failed because the existing VTOC has either been corrupted or was created by a different release of the TUXEDO System.
	Action	Contact your Oracle TUXEDO system Technical Support.

296	*ERROR: funcname: VTOC not initialized*
	Description	An attempt to access the VTOC has failed because the existing VTOC has not been properly initialized.
	Action	Contact your Oracle TUXEDO system Technical Support.

297	*ERROR: funcname: no space can be allocated for disk table or for VTOC/UDL*
	Description	An attempt to allocate space within the VTOC has failed because there are no more available slots.
	Action	Contact your Oracle TUXEDO system Technical Support.

298	*ERROR: funcname: Read beyond initialized file boundary.*
	Description	An attempt to access information in the VTOC has failed because the read has gone past the set boundaries of the VTOC.
	Action	Contact your Oracle TUXEDO system Technical Support.

299	*ERROR: funcname: Write beyond initialized file boundary.*
	Description	An attempt to write information to the VTOC has failed because the write has gone past the set boundaries of the VTOC.
	Action	Contact your Oracle TUXEDO system Technical Support.