Oracle8i Application Developer's Guide - Fundamentals
Release 8.1.5






Prev Next

Selecting a Datatype

This chapter discusses how to use Oracle built-in datatypes in applications. Topics include:

Oracle Built-In Datatypes

A datatype associates a fixed set of properties with the values that can be used in a column of a table or in an argument of a procedure or function. These properties cause Oracle to treat values of one datatype differently from values of another datatype. For example, Oracle can add values of NUMBER datatype, but not values of RAW datatype.

Oracle supplies the following built-in datatypes:

Another datatype, ROWID, is used for values in the ROWID pseudocolumn, which represents the unique address of each row in a table.

See Also:

See Oracle Call Interface Programmer's Guide for general descriptions of these datatypes, and see Oracle8i Application Developer's Guide - Large Objects (LOBs) for information about the LOB datatypes.  

Table 4-1 summarizes the information about each Oracle built-in datatype.

Table 4-1 Summary of Oracle Built-In Datatypes
Datatype   Description   Column Length and Default  

CHAR (size)  

Fixed-length character data of length size bytes  

Fixed for every row in the table (with trailing blanks); maximum size is 2000 bytes per row, default size is 1 byte per row. Consider the character set (one-byte or multibyte) before setting size.  

VARCHAR2 (size)  

Variable-length character data  

Variable for each row, up to 4000 bytes per row: Consider the character set (one-byte or multibyte) before setting size: A maximum size must be specified.  

NCHAR (size)  

Fixed-length character data of length size characters or bytes, depending on the national character set  

Fixed for every row in the table (with trailing blanks). Column size is the number of characters for a fixed-width national character set or the number of bytes for a varying-width national character set. Maximum size is determined by the number of bytes required to store one character, with an upper limit of 2000 bytes per row. Default is 1 character or 1 byte, depending on the character set.  

NVARCHAR2 (size)  

Variable-length character data of length size characters or bytes, depending on national character set: A maximum size must be specified  

Variable for each row. Column size is the number of characters for a fixed-width national character set or the number of bytes for a varying-width national character set. Maximum size is determined by the number of bytes required to store one character, with an upper limit of 4000 bytes per row. Default is 1 character or 1 byte, depending on the character set.  


Single-byte character data  

Up to 2^32 - 1 bytes, or 4 gigabytes.  


Single-byte or fixed-length multibyte national character set (NCHAR) data  

Up to 2^32 - 1 bytes, or 4 gigabytes.  


Variable-length character data  

Variable for each row in the table, up to 2^31 - 1 bytes, or 2 gigabytes, per row. Provided for backward compatibility.  

NUMBER (p, s)  

Variable-length numeric data.: Maximum precision p and/or scale s is 38  

Variable for each row. The maximum space required for a given column is 21 bytes per row.  


Fixed-length date and time data, ranging from Jan. 1, 4712 B.C.E. to Dec. 31, 4712 C.E.  

Fixed at 7 bytes for each row in the table. Default format is a string (such as DD-MON-YY) specified by NLS_DATE_FORMAT parameter.  


Unstructured binary data  

Up to 2^32 - 1 bytes, or 4 gigabytes.  


Binary data stored in an external file  

Up to 2^32 - 1 bytes, or 4 gigabytes.  

RAW (size)  

Variable-length raw binary data  

Variable for each row in the table, up to 2000 bytes per row. A maximum size must be specified. Provided for backward compatibility.  


Variable-length raw binary data  

Variable for each row in the table, up to 2^31 - 1 bytes, or 2 gigabytes, per row. Provided for backward compatibility.  


Binary data representing row addresses  

Fixed at 10 bytes (extended ROWID) or 6 bytes (restricted ROWID) for each row in the table.  


Trusted Oracle datatype  

See the Trusted Oracle documentation.  

Using Character Datatypes

Use the character datatypes to store alphanumeric data.

When deciding which datatype to use for a column that will store alphanumeric data in a table, consider the following points of distinction:

Space Usage

Comparison Semantics

Future Compatibility

CHAR, VARCHAR2, and LONG data is automatically converted from the database character set to the character set defined for the user session by the NLS_LANGUAGE parameter, where these are different.

Column Lengths for Single-Byte and Multibyte Character Sets

The lengths of CHAR and VARCHAR2 columns are specified in bytes rather than characters, and are constrained as such. The lengths of NCHAR and NVARCHAR2 columns are specified either in bytes or in characters, depending on the national character set being used.

When using a multibyte database character encoding scheme, consider carefully the space required for tables with character columns. If the database character encoding scheme is single-byte, then the number of bytes and the number of characters in a column is the same. If it is multibyte, then there generally is no such correspondence. A character might consist of one or more bytes depending upon the specific multibyte encoding scheme, and whether shift-in/shift-out control codes are present.

See Also:

Oracle8i Reference for information about National Language Support features of Oracle and support for different character encoding schemes.  

Comparison Semantics

Oracle compares CHAR and NCHAR values using blank-padded comparison semantics. If two values have different lengths, then Oracle adds blanks at the end of the shorter value, until the two values are the same length. Oracle then compares the values character-by-character up to the first character that differs. The value with the greater character in the first differing position is considered greater. Two values that differ only in the number of trailing blanks are considered equal.

Oracle compares VARCHAR2 and NVARCHAR2 values using non-padded comparison semantics. Two values are considered equal only if they have the same characters and are of equal length. Oracle compares the values character-by-character up to the first character that differs. The value with the greater character in that position is considered greater.

Because Oracle blank-pads values stored in CHAR columns but not in VARCHAR2 columns, a value stored in a VARCHAR2 column may take up less space than if it were stored in a CHAR column. For this reason, a full table scan on a large table containing VARCHAR2 columns may read fewer data blocks than a full table scan on a table containing the same data stored in CHAR columns. If your application often performs full table scans on large tables containing character data, then you might be able to improve performance by storing this data in VARCHAR2 columns rather than in CHAR columns.

However, performance is not the only factor to consider when deciding which of these datatypes to use. Oracle uses different semantics to compare values of each datatype. You might choose one datatype over the other if your application is sensitive to the differences between these semantics. For example, if you want Oracle to ignore trailing blanks when comparing character values, then you must store these values in CHAR columns.

See Also:

For more information on comparison semantics for these datatypes, see the Oracle8i Reference.  

Using the NUMBER Datatype

Use the NUMBER datatype to store real numbers in a fixed-point or floating-point format. Numbers using this datatype are guaranteed to be portable among different Oracle platforms, and offer up to 38 decimal digits of precision. You can store positive and negative numbers of magnitude 1 x 10^-130 to 9.99...x10^125, as well as zero, in a NUMBER column.

For numeric columns you can specify the column as a floating-point number:

Column_name NUMBER

Or, you can specify a precision (total number of digits) and scale (number of digits to right of decimal point):

Column_name NUMBER (<precision>, <scale>)

Although not required, specifying the precision and scale for numeric fields provides extra integrity checking on input. If a precision is not specified, then the column stores values as given. Table 3-2 shows examples of how data would be stored using different scale factors.

Table 4-2 How Scale Factors Affect Numeric Data Storage
Input Data  Stored As  Specified As 
7,456,123.89   NUMBER   7456123.89  
7,456,123.89   NUMBER (9)   7456124  
7,456,123.89   NUMBER (9,2)   7456123.89  
7,456,123.89   NUMBER (9,1)   7456123.9  
7,456,123.89   NUMBER (6)   (not accepted, exceeds precision)  
7,456,123.89   NUMBER (7, -2)   7456100  

See Also:

For information about the internal format for the NUMBER datatype, see Oracle8i Concepts.  

Using the DATE Datatype

Use the DATE datatype to store point-in-time values (dates and times) in a table. The DATE datatype stores the century, year, month, day, hours, minutes, and seconds.

Oracle uses its own internal format to store dates. Date data is stored in fixed-length fields of seven bytes each, corresponding to century, year, month, day, hour, minute, and second.

See Also:

See the Oracle Call Interface Programmer's Guide for a complete description of the Oracle internal date format.  

Date Format

For input and output of dates, the standard Oracle default date format is DD-MON-YY. For example:


To change this default date format on an instance-wide basis, use the NLS_DATE_FORMAT parameter. To change the format during a session, use the ALTER SESSION statement. To enter dates that are not in the current default date format, use the TO_DATE function with a format mask. For example:

TO_DATE ('November 13, 1992', 'MONTH DD, YYYY')

See Also:

Oracle Julian dates might not be compatible with Julian dates generated by other date algorithms. For information about Julian dates, see Oracle8i Concepts.  

If the date format DD-MON-YY is used, then YY indicates the year in the 20th century (for example, 31-DEC-92 is December 31, 1992). If you want to indicate years in any century other than the 20th century, then use a different format mask, as shown above.

Time Format

Time is stored in 24-hour format#HH:MM:SS. By default, the time in a date field is 12:00:00 A.M. (midnight) if no time portion is entered. In a time-only entry, the date portion defaults to the first day of the current month. To enter the time portion of a date, use the TO_DATE function with a format mask indicating the time portion, as in:


You may need to set up the following data structures for certain examples to work:

CREATE TABLE Birthdays_tab (Bname VARCHAR2(20),Bday DATE)

INSERT INTO Birthdays_tab (bname, bday) VALUES
('ANNIE',TO_DATE('13-NOV-92 10:56 A.M.','DD-MON-YY HH:MI A.M.'));

To compare dates that have time data, use the SQL function TRUNC if you want to ignore the time component. Use the SQL function SYSDATE to return the system date and time. The FIXED_DATE initialization parameter allows you to set SYSDATE to a constant; this can be useful for testing.

Establishing Year 2000 Compliance

An application must satisfy the following criteria to meet the requirements for Year 2000 (Y2K) compliance:

These criteria are a superset of the Year 2000 conformance requirements set out by the British Standards Institute in DISC PD-2000-1 A Definition of Year 2000 Conformity Requirements.

You can warrant your application as Y2K compliant only if you have validated its conformance at all three of the following system levels:

Oracle Server Year 2000 Compliance

The Oracle Server is Year 2000 compliant. No operational problems are expected with the Oracle Server, networking and system management products. Oracle's Development Organization has conducted tests of various Year 2000 operational scenarios to verify that there is no impact to users at the turn of the century. These scenarios included tests of replication, point-in-time recovery, distributed transactions. System management and networking features across time zones / datelines / centuries have also been tested.

Please note that Oracle's Year 2000 product compliance does not eliminate the need for you to test your own applications. Most importantly, your application software has to be tested on the Oracle Server to ensure that operations having to do with the year 2000 perform as promised. This test is critical even if the application software is certified to be Year 2000 compliant because there are no universal protocol definitions that can guarantee conformance without such testing.

Centuries and the Year 2000

Oracle stores year data with the century information. For example, the Oracle database stores 1996 or 2001, and not just 96 or 01. The DATE datatype always stores a four-digit year internally, and all other dates stored internally in the database have four digit years. Oracle utilities such as import, export, and recovery also deal properly with four-digit years.

Applications that use the Oracle RDBMS (Oracle7 and Oracle8 Server) and exploit the DATE data type (for date and/or date with time values) need have no concerns about their stored data when the year 2000 approaches. The Oracle7 and Oracle8 Server DATE data type stores date and time data to a precision that includes a four digit year and a time component down to seconds (typically `YYYY:MM:DD:HH24:MI:SS')

However, some applications might be written with an assumption about the year (such as assuming that everything is 19xx). The application might hand over a two-digit year to the database, and the procedures that Oracle uses for determining the century could be different from what the programmer expects (see "Programming Hints and Tips"). For this reason, you should review and test your code with regard to the Year 2000.

The 'RR' Date Format

The RR date format element of the TO_DATE and TO_CHAR functions allows a database site to default the century to different values depending on the two-digit year, so that years 50 to 99 default to 19xx and years 00 to 49 default to 20xx. Therefore, regardless of the current century at the time the data is entered, the 'RR' format will ensure that the year stored in the database is as follows:

The `RR' date format is available for inserting and updating DATE data in the database. It is not required for retrieval or query of data already stored in the database as Oracle has always stored the YEAR component of a date in its four-digit form.

Here is an example of the RR usage:

INSERT INTO emp (empno, deptno,hiredate) VALUES 
   (9999, 20, TO_DATE('01-jan-03', 'DD-MON-RR'));

 INSERT INTO emp (empno, deptno,hiredate) VALUES
    (8888, 20, TO_DATE('01-jan-67',  'DD-MON-RR'));

SELECT empno, deptno,
   TO_CHAR(hiredate, 'DD-MON-YYYY') hiredate
FROM emp;

This produces the following data:


---------- ---------- -----------------

8888 20 01-JAN-1967

9999 20 01-JAN-2003

The 'CC' Date Format

The CC date format element of the TO_CHAR function sets the century value to one greater than the first two digits of a four-digit year (for example, '20' from '1900'). For years that are a multiple of 100, this is not the true century. Strictly speaking, the century of '1900' is not the twentieth century (which began in 1901) but rather the nineteenth century.

The following workaround computes the correct century for any Common Era (CE, formerly known as AD) date. If userdate is a CE date for which you want the true century, use the following expression:

'00', TO_CHAR (Hiredate - 366, 'CC'), 
TO_CHAR (Hiredate, 'CC'))  FROM Emp_tab;

This expression works as follows: Get the last two digits of the year. If it is '00', then it is a year in which the Oracle century is one year too large, and compute a date in the preceding year (whose Oracle century is the desired true century). Otherwise, use the Oracle century.

See Also:

For more information about date format codes, see Oracle8 SQL Reference.  

Storing Dates in Character Data Types

Where applications store date values in CHAR or VARCHAR2 datatypes, and the century information is not maintained, you will need to modify the application to include routines which ensure that such dates are treated appropriately when affected by the change in century. You can do this by changing the strings to maintain century information or, with certain constraints, by using the 'RR' date format when interpreting the string as a date.

If you are creating a new application, or if you are modifying an application to ensure that dates stored as character strings are Year 2000 compliant, we advise that you convert dates to use the Oracle DATE data type. If this is not feasible, store the dates in a form which is language and format independent, and which handles full years. For example, utilize `SYYYY/MM/DD' plus the time element as `HH24:MI:SS' if necessary. Note that dates stored in this form must be converted to the correct external format whenever they are displayed or received from users or other programs.

The format 'SYYYY/MM/DD HH24:MI:SS' has the following advantages:

The "S" format element prefixes BC dates with "-".

Viewing Date Settings

The following views will enable you to verify what your settings are:

A format model is a character that describes the format of DATE or NUMBER data stored in a character string. You may use the format model as an argument of the TO_CHAR or TO_DATE function for one of the following:

Please note that the format does not change the internal representation of the value in the database.

Altering Date Settings

You may set the date format in your environment or as the default for the entire database. If you set this in your environment it will override the setting in the initialization parameter.

Programming Hints and Tips

In this section we describe some common programming problems around Y2K compliance. These problems may seem to derive from incorrect Year 2000 processing by the database engine, but on closer inspection are seen to arise from incorrect use of Oracle technology.

Example 1

Your application may have defined the year of a date using a column of CHAR(2) or NUMBER(2) in order to save disk space. This can lead to unpredictable results when 20xx dates are mixed with 19xx dates. To resolve this, modify your application to use the full 4-digit year.

Example 2

You application may be designed to store a 4-digit year, but the code may allow for the incorrect storage of 2-digit year rows with the 4-digit year rows. This will lead to unpredictable results for queries by date if the date columns contains dates earlier than 1900. To deal with this problem, have your application check for rows which contain dates earlier than 1900, and then adjust for this.

Example 3

Examine your applications to determine if it processes dates prior to 1950 or later than 2049, and store the year as 2-digits. If both conditions are met, your application should not use the 'RR' format but should instead expand the 2 digit year `YY ` into a for digit year `YYYY', and store the 4 digit number in the database.

Example 4

The following unusual error helps illuminate the interaction between NLS_DATE_FORMAT and the Oracle 'RR' format mask. The following is a syntactically correct statement but contains a logical flaw:


The above query will return 02/28/2000. This is consistent with the defined behavior of the `RR' format element. However, since the year 2000 is a leap year, this is incorrect.

The problems is that the operation is using the default NLS_DATE_FORMAT, which is 'DD-MON-YY'. If the NLS_DATE_FORMAT is changed to 'DD-MON-RR', then the same select returns 02/29/2000, which is the correct value.

Let us evaluate the query as the Oracle Server engine does. The first function processed is the innermost function, LAST_DAY. Because NLS_DATE_FORMAT is YY, this correctly returns 2/28, because it is using the year 1900 to evaluate the expression. The value 2/28 is then returned to the next outer function. So, the TO_DATE and TO_CHAR functions format the value 02/28/00 using the 'RR' format mask and display the result as 02/28/2000.

If SELECT LAST_DAY('01-FEB-00') FROM DUAL is issued, the result will change depending on the NLS_DATE_FORMAT. With 'YY', the LAST_DAY returned is 28-Feb-00 because the year is interpreted as 1900. With 'RR', the LAST_DAY returned is 29-Feb-00 because the year is interpreted as 2000. The year 1900 is not a leap year whereas the year 2000 is a leap year.

Using the LONG Datatype


The LONG datatype is provided for backward compatibility with existing applications. For new applications, you should use the CLOB and NCLOB datatypes for large amounts of character data. See Oracle8i Application Developer's Guide - Large Objects (LOBs) for information about the CLOB and NCLOB datatypes.  

The LONG datatype can store variable-length character data containing up to two gigabytes of information. The length of LONG values might be limited by the memory available on your computer.

You can use columns defined as LONG in SELECT lists, SET clauses of UPDATE statements, and VALUES clauses of INSERT statements. LONG columns have many of the characteristics of VARCHAR2 columns.

Restrictions on LONG and LONG RAW Data

Although LONG (and LONG RAW; see below) columns have many uses, their use has some restrictions:

Example of LONG Datatype

To store information on magazine articles, including the texts of each article, create two tables. For example:

CREATE TABLE Article_header   
(Id               NUMBER  PRIMARY KEY,  
Title             VARCHAR2(200),
First_author      VARCHAR2(30),
Journal           VARCHAR2(50),
Pub_date          DATE);
CREATE TABLE article_text
(Id               NUMBER
Text              LONG);

The ARTICLE_TEXT table stores only the text of each article. The ARTICLE_HEADER table stores all other information about the article, including the title, first author, and journal and date of publication. The two tables are related by the referential integrity constraint on the ID column of each table.

This design allows SQL statements to query data other than the text of an article without reading through the text. If you want to select all first authors published in Nature magazine during July 1991, then you can issue this statement that queries the ARTICLE_HEADER table:

SELECT First_author
FROM Article_header
WHERE Journal = 'NATURE'
AND TO_CHAR(Pub_date, 'MM YYYY') = '07 1991'; 

If the text of each article were stored in the same table with the first author, publication, and publication date, then Oracle would need to read through the text to perform this query.

Using RAW and LONG RAW Datatypes


The RAW and LONG RAW datatypes are provided for backward compatibility with existing applications. For new applications, you should use the BLOB and BFILE datatypes for large amounts of binary data.  

See Also:

See Oracle8i Application Developer's Guide - Large Objects (LOBs) for information about the BLOB and BFILE datatypes.  

The RAW and LONG RAW datatypes store data that is not to be interpreted by Oracle (that is, not to be converted when moving data between different systems). These datatypes are intended for binary data and byte strings. For example, LONG RAW can be used to store graphics, sound, documents, and arrays of binary data; the interpretation is dependent on the use.

Net8 and the Export and Import utilities do not perform character conversion when transmitting RAW or LONG RAW data. When Oracle automatically converts RAW or LONG RAW data to and from CHAR data (as is the case when entering RAW data as a literal in an INSERT statement), the data is represented as one hexadecimal character representing the bit pattern for every four bits of RAW data. For example, one byte of RAW data with bits 11001011 is displayed and entered as 'CB'.

LONG RAW data cannot be indexed, but RAW data can be indexed.

See Also:

For more information about restrictions on LONG RAW data, see "Restrictions on LONG and LONG RAW Data".  

ROWIDs and the ROWID Datatype

Every row in a nonclustered table of an Oracle database is assigned a unique ROWID that corresponds to the physical address of a row's row piece (initial row piece if the row is chained among multiple row pieces). In the case of clustered tables, rows in different tables that are in the same data block can have the same ROWID.

Each table in an Oracle database internally has a pseudocolumn named ROWID.

See Also:

Oracle8i Concepts for general information about the ROWID pseudocolumn and the ROWID datatype.  

Extended ROWID Format

The Oracle Server uses an extended ROWID format, which supports features such as table partitions, index partitions, and clusters.

The extended ROWID includes the following information:

The data object identifier is an identification number that Oracle assigns to schema objects in the database, such as nonpartitioned tables or partitions. For example:


This query returns the data object identifier for the EMP_TAB table in the SCOTT schema.

See Also:

Oracle8i Supplied Packages Reference for information about other ways to get the data object identifier, using the DBMS_ROWID package functions.  

Different Forms of the ROWID

Oracle documentation uses the term ROWID in different ways, depending on context. These uses are explained in this section.

Internal ROWID

The internal ROWID format is an internal structure which holds information that the server code needs to access a row. The restricted internal ROWID is 6 bytes on most platforms; the extended ROWID is 10 bytes on these platforms.

ROWID Pseudocolumn

Each table and nonjoined view has a pseudocolumn called ROWID. For example:

CREATE TABLE T_tab (col1 Rowid);

INSERT INTO T_tab SELECT Rowid FROM Emp_tab WHERE Empno = 7499;

This command returns the ROWID pseudocolumn of the row of the EMP_TAB table that satisfies the query, and inserts it into the T1 table.

External Character ROWID

The extended ROWID pseudocolumn is returned to the client in the form of an 18-character string (for example, "AAAA8mAALAAAAQkAAA"), which represents a base 64 encoding of the components of the extended ROWID in a four-piece format, OOOOOOFFFBBBBBBRRR:

There is no need to decode the external ROWID; you can use the functions in the DBMS_ROWID package to obtain the individual components of the extended ROWID.

See Also:

Oracle8i Supplied Packages Reference for information about the DBMS_ROWID package.  

The restricted ROWID pseudocolumn is returned to the client in the form of an 18-character string with a hexadecimal encoding of the datablock, row, and datafile components of the ROWID.

External Binary ROWID

Some client applications use a binary form of the ROWID. For example, OCI and some precompiler applications can map the ROWID to a 3GL structure on bind or define calls. The size of the binary ROWID is the same for extended and restricted ROWIDs. The information for the extended ROWID is included in an unused field of the restricted ROWID structure.

The format of the extended binary ROWID, expressed as a C struct, is:

struct riddef {
ub4    ridobjnum; /* data obj#--this field is 
                     unused in restricted ROWIDs */
ub2    ridfilenum;
ub1    filler;
ub4    ridblocknum;
ub2    ridslotnum;

ROWID Migration and Compatibility Issues

For backward compatibility, the restricted form of the ROWID is still supported. These ROWIDs exist in massive amounts of Oracle7 data, and the extended form of the ROWID is required only in global indexes on partitioned tables. New tables always get extended ROWIDs.

See Also:

Oracle8i Administrator's Guide.  

It is possible for an Oracle7 client to access an Oracle8 database. Similarly, an Oracle8 client can access an Oracle7 Server. A client in this sense can include a remote database accessing a server using database links, as well as a client 3GL or 4GL application accessing a server.

See Also:

There is more information on the ROWID_TO_EXTENDED function in Oracle8i Supplied Packages Reference and Oracle8i Migration.  

Accessing an Oracle7 Database from an Oracle8 Client

The ROWID values that are returned are always restricted ROWIDs. Also, Oracle8 uses restricted ROWIDs when returning a ROWID value to an Oracle7 or earlier server.

The following ROWID functionality works when accessing an Oracle7 Server:

Accessing an Oracle8 Database from an Oracle7 Client

Oracle8 returns ROWIDs in the extended format. This means that you can only:

Import and Export

It is not possible for an Oracle7 client to import an Oracle8 table that has a ROWID column (not the ROWID pseudocolumn), if any row of the table contains an extended ROWID value.

Trusted Oracle MLSLABEL Datatype

Trusted Oracle provides the MLSLABEL datatype, which stores Trusted Oracle's internal representation of labels generated by multilevel secure (MLS) operating systems. Trusted Oracle uses labels to control database access.

You can define a column using the MLSLABEL datatype for compatibility with Trusted Oracle applications, but the only valid value for the column in Oracle8 is NULL.

When you create a table in Trusted Oracle, a column called ROWLABEL is automatically appended to the table. This column contains a label of the MLSLABEL datatype for every row in the table.

See Also:

Trusted Oracle documentation for more information about the MLSLABEL datatype, the ROWLABEL column, and Trusted Oracle.  

ANSI/ISO, DB2, and SQL/DS Datatypes

You can define columns of tables in an Oracle database using ANSI/ISO, DB2, and SQL/DS datatypes. Oracle internally converts such datatypes to Oracle datatypes.

The ANSI datatype conversions to Oracle datatypes are shown in Table 4-3. The ANSI/ISO datatypes NUMERIC, DECIMAL, and DEC can specify only fixed-point numbers. For these datatypes, s defaults to 0.

Table 4-3 ANSI Datatype Conversions to Oracle Datatypes
ANSI SQL Datatype  Oracle Datatype 


CHAR (n)  

NUMERIC (p,s), DECIMAL (p,s), DEC (p,s)  

NUMBER (p,s)  


NUMBER (38)  

FLOAT (p)  

FLOAT (p)  


FLOAT (63)  


FLOAT (126)  


VARCHAR2 (n)  

The IBM products SQL/DS, and DB2 datatypes TIME, TIMESTAMP, GRAPHIC, VARGRAPHIC, and LONG VARGRAPHIC have no corresponding Oracle datatype and cannot be used. The TIME and TIMESTAMP datatypes are subcomponents of the Oracle datatype DATE.

Table 4-4 shows the DB2 and SQL/DS conversions.

Table 4-4 SQL/DS, DB2 Datatype Conversions to Oracle Datatypes
DB2 or SQL/DS Datatype  Oracle Datatype 


CHAR (n)  


VARCHAR2 (n)  



DECIMAL (p,s)  

NUMBER (p,s)  


NUMBER (38)  

FLOAT (p)  

FLOAT (p)  



Data Conversion

In some cases, Oracle allows data of one datatype where it expects data of a different datatype. Generally, an expression cannot contain values with different datatypes. However, Oracle can use the following functions to automatically convert data to the expected datatype:

Implicit datatype conversions work according to the rules explained below.

See Also:

If you are using Trusted Oracle, see "Data Conversion for Trusted Oracle" for information about data conversions and the MLSLABEL datatype.  

Rule 1: Assignments

For assignments, Oracle can automatically convert the following:

The assignment succeeds if Oracle can convert the datatype of the value used in the assignment to that of the assignment's target.

For the examples in the following list, assume a package with a public variable and a table declared as in the following statements:


You may need to set up the following data structures for certain examples to work:

CREATE TABLE Table1_tab (col1 NUMBER); 

Rule 2: Expression Evaluation


You may need to set up data structures for certain examples to work:  

For expression evaluation, Oracle can automatically perform the same conversions as for assignments. An expression is converted to a type based on its context. For example, operands to arithmetic operators are converted to NUMBER and operands to string functions are converted to VARCHAR2.

Oracle can automatically convert the following:

Character to NUMBER conversions succeed only if the character string represents a valid number. Character to DATE conversions succeed only if the character string satisfies the session default format, which is specified by the initialization parameter NLS_DATE_FORMAT.

Some common types of expressions follow:

In general, Oracle uses the rule for expression evaluation when a datatype conversion is needed in places not covered by the rule for assignment conversions.

In assignments of the form:

variable := expression

Oracle first evaluates expression using the conversions covered by Rule 2; expression can be as simple or complex as desired. If it succeeds, then the evaluation of expression results in a single value and datatype. Then, Oracle tries to assign this value to the assignment's target using Rule 1.

Data Conversion for Trusted Oracle

In Trusted Oracle, labels are stored internally as compact binary structures. Trusted Oracle provides the TO_LABEL function that enables you to convert a label from its internal binary format to an external character format. To convert a label from character format to binary format in Trusted Oracle, you use the TO_CHAR function.

The TO_LABEL function is provided for compatibility with Trusted Oracle applications. It returns the NULL value in Oracle8.

See Also:

The Trusted Oracle documentation has more information about using the TO_LABEL and TO_CHAR functions to convert label formats.  


Copyright © 1999 Oracle Corporation.

All Rights Reserved.