Release Notes
Release 10.0.1
E76293-01
August 2016
This document provides release notes for Oracle Communications Instant Messaging Server Release 10.0.1, consisting of the following sections:
The new features in this release of Instant Messaging Server are:
For information on how to configure and use these new features, see Instant Messaging Server System Administrator's Guide and Instant Messaging Server Security Guide.
Instant Messaging Server 10.0.1 supports the following XMPP extension and RFC:
XEP-0215: External Service Delivery
RFC 7395: An Extensible Messaging and Presence Protocol (XMPP) Subprotocol for WebSocket
Additional information on these standards is provided in the following sections.
External Service Discovery enables the XMPP server to support and share information about services external to the XMPP server, mainly TURN (Traversal Using Relay NAT) and STUN (Session Traversal Utilities for NAT) server details, with clients. For more information on configuring Instant Messaging Server for External Service Discovery, see Instant Messaging Server System Administrator's Guide.
The XMPP WebSocket Gateway enables the Instant Messaging Server to support the WebSocket protocol for XMPP. XMPP over WebSocket is an efficient solution for HTTP access of Instant Messaging Server other than HTTPBind. The Instant Messaging multiplexor enables scaling of TCP client connections and also provides failover to other Instant Messaging Server nodes. These existing capabilities of the multiplexor can be reused when WebSocket client connections are interfaced with it. For more information on configuring the XMPP WebSocket Gateway, see Instant Messaging Server System Administrator's Guide
Instant Messaging Server 10.0.1 introduces the following configuration properties:
iim_websocket.session_idletimeout: Specifies to disable timeout completely, or the number of seconds after which to close an idle session, for the WebSocket gateway.
iim_mux.usessl: Specifies whether the multiplexor uses SSL. The usage of SSL is currently limited to encrypted data between the multiplexor and server.
iim_mux.encrypted_channel: When a channel is created, you can use this property to specify it as encrypted.
iim_mux.sslkeystore: Specifies the keystore file for multiplexor to server encryption. This property is optional.
iim_mux.keystorepasswordfile: Specifies the keystore password file for multiplexor to server encryption. This property is optional.
iim_server.ext_disco.provider: Specifies the provider class for the External Service Discovery plugin.
The imUserStatus LDAP attribute has been added, and is installed by the comm_dssetup script.
This section lists the fixed issues in this release of Instant Messaging Server.
| Service Request (SR) Number | BugDB Number | Description |
|---|---|---|
|
NA |
23481778 |
Accept working with the previously open stream after TLS handshake. |
|
NA |
23481723 |
Accept delimiter double quote. |
|
NA |
23318196 |
The configure script should not check for encrypted files with plaintext savestate files. |
|
NA |
23173543 |
HTTPbind request results in 4xx or 5xx error. |
|
NA |
23170977 |
Support silent configuration using saved state file for encrypted password. |
|
3-12444445891 |
23066063 |
Unable to change chat owner affiliation after waiting iim_ldap.resynctime delay. |
|
NA |
23008114 |
Inaccurate C2S count in resource conflict case when user logs in again with same resource through HTTPbind. |
|
3-12557887491 |
22956564 |
Instant Messaging service does not have status attribute. |
|
3-12291443121 |
22910036 |
Alias account logs into Convergence but fails to connect to Instant Messaging Server. |
|
NA |
22891977 |
Include XMPP WebSocket support. |
|
NA |
22873018 |
Provide option to generate encryption key without the configuration file being present. |
|
NA |
22780300 |
Silent configuration sometimes does not proceed on Linux. |
|
NA |
22581349 |
TLS worker threads for handling TLS calls in the server need to be separated under different thread pool. |
|
NA |
22565099 |
Multiplexor needs to be able to throttle incoming client connections. |
|
NA |
22564636 |
Instant Messaging Server needs to be able to throttle incoming TLS connections. |
|
NA |
22523633 |
Memory leak in PresenceAPI User object. |
|
NA |
22523479 |
Add XML group property for IQ handler. |
|
NA |
22254233 |
Plugin mechanism for returning one-time service credentials. |
|
3-11521300851 |
22083901 |
PresenceAPI consumes memory. |
|
NA |
21982845 |
Implement support for External Service Discovery (XEP-0215). |
|
NA |
21943053 |
The imservicestat utility prints a message that response time is not working. |
|
NA |
21631220 |
Silent configuration prints "Cannot add encryption key file" when run in debug mode. |
|
NA |
21626923 |
Provide proper support when user is logged in using mail attribute. |
|
NA |
21545259 |
The imservicestat utility must validate the test JID entered. |
|
NA |
21346926 |
Logging in to Instant Messaging Server by using the mail attribute does not work. |
This section lists the known problems in this release of Instant Messaging Server.
SR number: NA
Bug number: 23059610
The multiplexor does not clear inactive sessions.
SR number: NA
Bug number: 23576641
If you run a silent configuration using a save state file that contains plaintext passwords, you receive the following error message that can be safely ignored:
Error decrypting passwords from state files Key file not found
The configuration does complete successfully.
SR number: NA
Bug number: 21824106
If System Management Facility (SMF) is not enabled, then the imadmin stop and start commands do not exit.
SR number: NA
Bug number: 21613054
Currently, multiplexor failover does not support dynamically adding Instant Messaging server nodes, without restarting the multiplexor.
SR number: NA
Bug number: 21374862
The associatedDomain attribute cannot be added to LDAP and thus the following filter is invalid:
iim_ldap.schema1.domain_filter="(&(objectClass=sunManagedOrganization)(|(sunPreferredDomain={0})(associatedDomain={0})))"
The user login fails even after setting the iim_ldap.schema1.domain_filter property to "(objectclass=inetDomain)".
SR number: NA
Bug number: 21293911
As of Instant Messaging Server 10.0, the Facebook Gateway is no longer supported. However, if you had set the Facebook Gateway and Gateway Connector properties then upgraded to Instant Messaging Server 10.0, the Facebook Gateway and log4j parameters for the Gateway Connector are still present in the iim.conf.xml file.
Workaround:
Comment out the following section from the InstantMessaging_home/config/log4j.conf, so that the gwcd.log file does not get generated after upgrading to Instant Messaging Server 10.0:
log4j.logger.gwcd=INFO, A10
log4j.appender.A10=org.apache.log4j.RollingFileAppender
log4j.appender.A10.file=${logdir}/gwcd.log
log4j.appender.A10.append=true
log4j.appender.A10.maxBackupIndex=7
log4j.appender.A10.maxFileSize=5mb
log4j.appender.A10.layout=org.apache.log4j.PatternLayout
log4j.appender.A10.layout.ConversionPattern=[%d{DATE}] %-5p %c [%t] %m%n
SR number: NA
Bug number: 21229143
The messages sent from a user connected to a federated server to a user connected to an Instant Messaging server are not archived.
SR number: NA
Bug number: 21183202
In a deployment where federation has been enabled between an Instant Messaging server and an XMPP server, the federated users cannot add Instant Messaging Server users by specifying associated domain to their rosters. Federated users can add IMusers@canonical_domain to their rosters. When federated users try to add IMusers@associated_domain, the operation fails. This occurs even though the associated domain filters and attribute were added to the LDAP for the Instant Messaging server.
SR number: NA
Bug number: 20435049
Even though a user specifically blocks messages from a certain user, messages sent from the blocked user are still archived in the store.
SR number: NA
Bug number: 21363182
After Upgrading to Instant Messaging Server 10.0, the IMAPI (SUNWiimdv) package is not automatically removed as part of the upgrade process.
Workaround:
Run the following command to uninstall the IMAPI package:
commpkg uninstall --includeSC --comp IMAPI
SR number: NA
Bug number: 21127111
After upgrading to Instant Messaging Server 10.0, inter-hosted domain communication is disabled, as this is the default value.
Workaround:
Set the iim_server.hosteddomains.allowcrossdomainsaccess property to true.
SR number: NA
Bug number: 19363491
In a Convergence deployment, occasionally the Instant Messaging Server buddy list does not load, even though the tab shows as connecting.
Workaround:
Use the imconfutil command to modify both the Instant Messaging Server Port Number (Multiplexed XMPP Port) and Instant Messaging Server-to-Server Port Number (XMPP Server Port) to some unoccupied port numbers (the defaults for these ports are 45222 and 5269, respectively).
Restart Instant Messaging Server.
SR number: NA
Bug number: 18787873
The XMPP RFC specifies the MD5 check should use a domain name for the URI. The Pidgin BOSH client uses a host name according to Digest MD5 RFC1321. Digest MD5 does work with Strophe clients.
SR number: NA
Bug number: 17155860
During an upgrade, server-to-server coserver configuration migrates to Instant Messaging Server 9.0.1.4.0, even though the coserver-based system of defining whitelists is not supported in Instant Messaging Server 9.0.1.4.0.
Workaround:
After an upgrade from Instant Messaging Server 8 release to Instant Messaging Server 9.0.1.4.0, remove the server-to-server coserver properties manually, by using the following command:
imconfutil delete-coserver -c /opt/sun/comms/im/config/iim.conf.xml coserver1,coserver2
If you want to make server-to-server federation work as it did in Instant Messaging Server 8, perform the following steps:
Set iim_server.federation.policy=CLOSED.
Set whitelisted domains as exceptions, as in the following full imconfutil command, where domain1.com and domain2.com were whitelisted domains in Instant Messaging Server 8:
imconfutil -c /opt/sun/comms/im/config/iim.conf.xml iim_server.federation.policy=CLOSED iim_server.federation.exceptions=domain1.com,domain2.com
For more details on server-to-server configuration, see the topic on federating Instant Messaging Server 9 deployments with external servers on XMPP or non-XMPP networks in Instant Messaging Server System Administrator's Guide.
SR number: NA
Bug number: 17608554
If the first line in the iim.conf file is a comment introduced by !!, it must be removed before upgrading to Instant Messaging Server 9. Otherwise, it results in an unusable iim.conf file with minimal contents.
SR number: NA
Bug number: 17613019
In an Instant Messaging Server 8 iim.conf file, if there is a space before or after the equal sign in a property=value pair, upgrading to Instant Messaging Server 9 treats the equal sign as part of the value in the iim.conf.xml file. For example yim_gateway.jid = "yim.idc.oracle.com" in an Instant Messaging Server 8 iim.conf file becomes <jid>="yim.idc.oracle.com"</jid> in an Instant Messaging Server 9 iim.conf.xml file.
SR number: NA
Bug number: 17608577
The following parameters are not migrated in an upgrade from Instant Messaging Server 8 Patch 6 to Instant Messaging Server 9:
iim_server.port.45222.worker-in iim_server.port.45222.worker-out
You need to add the parameters to Instant Messaging Server 9 manually, as in the following example:
imconfutil set-listener-prop -u -c /opt/sun/comms/im/config/iim.conf.xml c2s port=45222 worker-out=muxout worker-in=muxin protocols=c2s
SR number: NA
Bug number: 17613731
The following parameters are in Instant Messaging Server 8 Patch 6, but are not in Instant Messaging Server 9:
iim_mux.jvm.maxmemorysize iim_server.deliverofflinechat iim.policy.cachevalidity iim_ldap.conferencecontainer
If you upgraded from Instant Messaging Server 8 Patch 6 to Instant Messaging Server 9 and are now upgrading from Instant Messaging Server 9 to Instant Messaging Server 9.0.1.4.0, you must set these parameters manually, as in the following example:
imconfutil set-prop -u -c /opt/sun/comms/im/config/iim.conf.xml iim_server.deliverofflinechat=true iim_mux.jvm.maxmemorysize=2048 iim_ldap.conferencecontainer="ou=sunConferences" iim.policy.cachevalidity=3600
SR number: NA
Bug number: 19163612
After upgrading Instant Messaging Server, Service Management Facility (SMF) becomes unregistered. To re-register SMF, run the following command:
imadmin smf-register
SR number: NA
Bug number: 18956613
A communication delay can occur between users in a multiuser chat room when many users are joining the chat room.
SR number: NA
Bug number: 18956566
A delay in affiliation can occur between users in a multiuser chat room when many users are joining the chat room.
SR number: NA
Bug number: 18944756
A small communication delay can occur between users when first connecting by using HTTPBIND.
SR number: NA
Bug number: 18799534
When a user logs out and logs in, the presence of contacts does not show correctly. After the user logs out, the user's contacts change status, but that status is not reflected in the user's roster when the user logs in again.
SR number: NA
Bug number: 18724264
The following message, if observed in the xmppd.log, is not a cause for concern:
xmppd.log.3:[06 May 2014 11:27:44,757] WARN xmppd [default-iim_server-worker 1] Could not load roster for user: user1@ihost1.example.com : null
This message should not be printed as a warning because it misleads the user into thinking there is a problem.
The following feature has been removed from this release:
Facebook Gateway
Support for the following software has been deprecated in this release:
Oracle Solaris Cluster
For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.
Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.
Oracle Communications Instant Messaging Server Release Notes, Release 10.0.1
E76293-01
Copyright © 2016, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:
U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.
This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.