V$ARCHIVE

7.27 V$ARCHIVE_DEST

V$ARCHIVE_DEST displays, for the current instance, all of the destinations in the Data Guard configuration, including each destination's current value, mode, and status.

Column	Datatype	Description
`DEST_ID`	`NUMBER`	Log archive destination parameter identifier (`1` to `31`)
`DEST_NAME`	`VARCHAR2(256)`	Log archive destination parameter name
`STATUS`	`VARCHAR2(9)`	Identifies the current status of the destination: `VALID` - Initialized and available `INACTIVE` - No destination information `DEFERRED` - Manually disabled by the user `ERROR` - Error during open or copy `DISABLED` - Disabled after error `BAD PARAM` - Parameter has errors `ALTERNATE` - Destination is available as an alternate `FULL` - Exceeded quota size for the destination
`BINDING`	`VARCHAR2(9)`	Specifies how failure will affect the archival operation: `MANDATORY` - Successful archival is required `OPTIONAL` - Successful archival is not required (depends on `LOG_ARCHIVE_MIN_SUCCEED_DEST`)
`NAME_SPACE`	`VARCHAR2(7)`	Identifies the scope of parameter setting: `SYSTEM` - System definition `SESSION` - Session definition
`TARGET`	`VARCHAR2(7)`	For a primary database, this column specifies whether the archive destination is local or remote to the primary database: `PRIMARY` - local `STANDBY` - remote For a standby database, this column specifies whether the archive destination is local or remote to the standby database: `LOCAL` - local `REMOTE` - remote
`ARCHIVER`	`VARCHAR2(10)`	Identifies the archiver process relative to the database where the query is issued: `ARCn` `FOREGROUND` `LGWR` `RFS`
`SCHEDULE`	`VARCHAR2(8)`	Indicates whether the archival of this destination is `INACTIVE`, `PENDING`, `ACTIVE`, or `LATENT`
`DESTINATION`	`VARCHAR2(256)`	Specifies the location where the archived redo logs are to be archived
`LOG_SEQUENCE`	`NUMBER`	Identifies the sequence number of the last archived redo log to be archived
`REOPEN_SECS`	`NUMBER`	Identifies the retry time (in seconds) after error
`DELAY_MINS`	`NUMBER`	Identifies the delay interval (in minutes) before the archived redo log is automatically applied to a standby database
`MAX_CONNECTIONS`	`NUMBER`	Maximum number of connections
`NET_TIMEOUT`	`NUMBER`	Number of seconds the log writer process will wait for status from the network server of a network operation issued by the log writer process
`PROCESS`	`VARCHAR2(10)`	Identifies the archiver process relative to the primary database, even if the query is issued on the standby database: `ARCn` `FOREGROUND` `LGWR`
`REGISTER`	`VARCHAR2(3)`	Indicates whether the archived redo log is registered in the remote destination control file (`YES`) or not (`NO`). If the archived redo log is registered, it is available to log apply services.
`FAIL_DATE`	`DATE`	Date and time of last error
`FAIL_SEQUENCE`	`NUMBER`	Sequence number of the archived redo log being archived when the last error occurred
`FAIL_BLOCK`	`NUMBER`	Block number of the archived redo log being archived when the last error occurred
`FAILURE_COUNT`	`NUMBER`	Current number of contiguous archival operation failures that have occurred for the destination
`MAX_FAILURE`	`NUMBER`	Allows you to control the number of times log transport services will attempt to reestablish communication and resume archival operations with a failed destination
`ERROR`	`VARCHAR2(256)`	Displays the error text
`ALTERNATE`	`VARCHAR2(256)`	Alternate destination, if any
`DEPENDENCY`	`VARCHAR2(256)`	Reserved for future use
`REMOTE_TEMPLATE`	`VARCHAR2(256)`	Specifies the template to be used to derive the location to be recorded
`QUOTA_SIZE`	`NUMBER`	Destination quotas, expressed in bytes
`QUOTA_USED`	`NUMBER`	Size of all the archived redo logs currently residing on the specified destination
`MOUNTID`	`NUMBER`	Instance mount identifier
`TRANSMIT_MODE`	`VARCHAR2(12)`	Specifies network transmission mode: `SYNCHRONOUS` `PARALLELSYNC` `ASYNCHRONOUS`
`ASYNC_BLOCKS`	`NUMBER`	Number of blocks specified for the `ASYNC` attribute
`AFFIRM`	`VARCHAR2(3)`	Specifies disk I/O mode
`TYPE`	`VARCHAR2(7)`	Indicates whether the archived log destination definition is `PUBLIC` or `PRIVATE`. Only `PUBLIC` destinations can be modified at run time using the `ALTER SYSTEM SET` or `ALTER SESSION SET` statements. By default, all archived log destinations are `PUBLIC`.
`VALID_NOW`	`VARCHAR2(16)`	Indicates whether the destination is valid right now for archival operations: `YES` - Redo log type and database role for this destination are valid for the current database `WRONG VALID_TYPE` - Redo log type specified for this destination is not valid for the current database role. For example, `WRONG VALID_TYPE` would be returned if a destination specified with the `VALID_FOR=(STANDBY_LOGFILE,STANDBY_ROLE)` attribute is running in the standby database role but does not have standby redo logs implemented. `WRONG VALID_ROLE` - Database role specified for this destination is not the role in which the database is currently running. For example, the WRONG `VALID_ROLE` would be returned when a destination defined with the `VALID_FOR=(ONLINE_LOGFILE,STANDBY_ROLE)` attribute is running in the primary database role. `INACTIVE` - Destination is inactive, probably due to an error
`VALID_TYPE`	`VARCHAR2(15)`	Redo log type or types that are valid for the destination: `ONLINE_LOGFILE` `STANDBY_LOGFILE` `ALL_LOGFILES`
`VALID_ROLE`	`VARCHAR2(12)`	Database role or roles that are valid for the destination: `PRIMARY_ROLE` `STANDBY_ROLE` `ALL_ROLES`
`DB_UNIQUE_NAME`	`VARCHAR2(30)`	Unique database name
`VERIFY`	`VARCHAR2(3)`	Indicates whether the value of the `VERIFY` attribute on the `LOG_ARCHIVE_DEST_n` parameter is verified (`YES`) or not verified (`NO`)
`COMPRESSION`	`VARCHAR2(7)`	Indicates whether network compression is `ENABLED` or `DISABLED`, or whether the `ZLIB` or `LZO` algorithm is in use. These values correspond to the values accepted by the `COMPRESSION` attribute for the database initialization parameter `LOG_ARCHIVE_DEST_n`. The possible values include: `DISABLE`: Compression is disabled. `ENABLE`: Compression is enabled. The `ZLIB` compression algorithm is used. `ZLIB`: `ZLIB` compression is used. `LZO`: `LZO` compression is used.
`APPLIED_SCN`	`NUMBER`	For a destination that corresponds to a physical or logical standby database, the SCN of the last applied redo. For a destination that corresponds to a snapshot standby database, the SCN of the last redo applied before conversion to a snapshot standby database. This column is only valid for enabled and active standby database destinations on a primary or cascading standby database.
`CON_ID`	`NUMBER`	The ID of the container to which the data pertains. Possible values include: `0`: This value is used for rows containing data that pertain to the entire CDB. This value is also used for rows in non-CDBs. `1`: This value is used for rows containing data that pertain to only the root n: Where n is the applicable container ID for the rows containing data
`ENCRYPTION`	`VARCHAR2(7)`	Indicates whether encryption of the redo stream sent to Zero Data Loss Recovery Appliance (Recovery Appliance) is enabled (`ENABLED`) or not (`DISABLED`)