Preface

This manual describes the Oracle Transparent Gateway for Ingres II, which enables Oracle client applications to access Ingres II data through Structured Query Language (SQL). The gateway, with the Oracle database server, creates the appearance that all data resides on a local Oracle database server, even though the data can be widely distributed.

This preface covers the following topics:

Audience

This manual is intended for Oracle database administrators who perform the following tasks:

Installing and configuring the Oracle Transparent Gateway for Ingres II
Diagnosing gateway errors
Using the gateway to access Ingres II data

Note:
You should understand the fundamentals of transparent gateways and the HP-UX operating system before using this guide to install or administer the gateway.

Organization

This document contains:

Chapter 1, "Introduction"

This chapter introduces the Oracle Transparent Gateway for Ingres II.

Chapter 2, "Configuring the Gateway"

This chapter explains how to configure the gateway for Ingres II.

Chapter 3, "Ingres II Gateway Features and Restrictions"

This chapter explains how to use the gateway to access Ingres II data, pass Ingres II commands from applications to the Ingres II database, perform distributed queries, and copy data.

Chapter 4, "Case Studies"

This chapter contains case studies that demonstrate some of the features of the Oracle Transparent Gateway.

Appendix A, "Data Type Conversion"

This appendix describes how the gateway converts Ingres II data types to Oracle data types.

Appendix B, "Supported SQL Syntax and Functions"

This appendix describes the SQL statements and Oracle functions supported by Ingres II.

Appendix C, "Data Dictionary"

This appendix contains information about data dictionary support, data dictionary mapping, and gateway data dictionary descriptions.

Appendix D, "Heterogeneous Services Initialization Parameters"

This appendix contains information about Heterogeneous Services initialization parameters.

Conventions

This section describes the conventions used in the text and code examples of this documentation set. It describes:

Conventions in Text

We use various conventions in text to help you more quickly identify special terms. The following table describes those conventions and provides examples of their use.

Convention Meaning Example

Bold

Bold typeface indicates terms that are defined in the text or terms that appear in a glossary, or both.

When you specify this clause, you create an index-organized table.

Italics

Italic typeface indicates book titles or emphasis.

Oracle Database Concepts
Ensure that the recovery catalog and target database do not reside on the same disk.

UPPERCASE monospace (fixed-width) font

Uppercase monospace typeface indicates elements supplied by the system. Such elements include parameters, privileges, datatypes, RMAN keywords, SQL keywords, SQL*Plus or utility commands, packages and methods, as well as system-supplied column names, database objects and structures, usernames, and roles.

You can specify this clause only for a NUMBER column.
You can back up the database by using the BACKUP command.
Query the TABLE_NAME column in the USER_TABLES data dictionary view.
Use the DBMS_STATS.GENERATE_STATS procedure.

lowercase monospace (fixed-width) font

Lowercase monospace typeface indicates executables, filenames, directory names, and sample user-supplied elements. Such elements include computer and database names, net service names, and connect identifiers, as well as user-supplied database objects and structures, column names, packages and classes, usernames and roles, program units, and parameter values.
Note: Some programmatic elements use a mixture of UPPERCASE and lowercase. Enter these elements as shown.

Enter sqlplus to open SQL*Plus.
The password is specified in the orapwd file.
Back up the datafiles and control files in the /disk1/oracle/dbs directory.
The department_id, department_name, and location_id columns are in the hr.departments table.
Set the QUERY_REWRITE_ENABLED initialization parameter to true.
Connect as oe user.
The JRepUtil class implements these methods.

lowercase italic monospace (fixed-width) font

Lowercase italic monospace font represents placeholders or variables.

You can specify the parallel_clause.
Run Uold_release.SQL where old_release refers to the release you installed prior to upgrading.

Convention	Meaning	Example
Bold	Bold typeface indicates terms that are defined in the text or terms that appear in a glossary, or both.	When you specify this clause, you create an index-organized table.
Italics	Italic typeface indicates book titles or emphasis.	Oracle Database Concepts Ensure that the recovery catalog and target database do not reside on the same disk.
`UPPERCASE monospace (fixed-width) font`	Uppercase monospace typeface indicates elements supplied by the system. Such elements include parameters, privileges, datatypes, RMAN keywords, SQL keywords, SQL*Plus or utility commands, packages and methods, as well as system-supplied column names, database objects and structures, usernames, and roles.	You can specify this clause only for a `NUMBER` column. You can back up the database by using the `BACKUP` command. Query the `TABLE_NAME` column in the `USER_TABLES` data dictionary view. Use the `DBMS_STATS`.`GENERATE_STATS` procedure.
`lowercase monospace (fixed-width) font`	Lowercase monospace typeface indicates executables, filenames, directory names, and sample user-supplied elements. Such elements include computer and database names, net service names, and connect identifiers, as well as user-supplied database objects and structures, column names, packages and classes, usernames and roles, program units, and parameter values. Note: Some programmatic elements use a mixture of UPPERCASE and lowercase. Enter these elements as shown.	Enter `sqlplus` to open SQL*Plus. The password is specified in the `orapwd` file. Back up the datafiles and control files in the `/disk1/oracle/dbs` directory. The `department_id`, `department_name`, and `location_id` columns are in the `hr.departments` table. Set the `QUERY_REWRITE_ENABLED` initialization parameter to `true.` Connect as `oe` user. The `JRepUtil` class implements these methods.
`lowercase italic monospace (fixed-width) font`	Lowercase italic monospace font represents placeholders or variables.	You can specify the `parallel_clause`. Run `U``old_release``.SQL` where `old_release` refers to the release you installed prior to upgrading.

Conventions in Code Examples

Code examples illustrate SQL, PL/SQL, SQL*Plus, or other command-line statements. They are displayed in a monospace (fixed-width) font and separated from normal text as shown in this example:

SELECT username FROM dba_users WHERE username = 'MIGRATE';

The following table describes typographic conventions used in code examples and provides examples of their use.

Convention Meaning Example

[ ]

Brackets enclose one or more optional items. Do not enter the brackets.

DECIMAL (digits [ , precision ])

{ }

Braces enclose two or more items, one of which is required. Do not enter the braces.

{ENABLE | DISABLE}

|

A vertical bar represents a choice of two or more options within brackets or braces. Enter one of the options. Do not enter the vertical bar.

{ENABLE | DISABLE} [COMPRESS | NOCOMPRESS]

...

Horizontal ellipsis points indicate either:

That we have omitted parts of the code that are not directly related to the example

That you can repeat a portion of the code

CREATE TABLE ... AS subquery; SELECT col1, col2, ... , coln FROM employees;

. . .

Vertical ellipsis points indicate that we have omitted several lines of code not directly related to the example.

SQL> SELECT NAME FROM V$DATAFILE; NAME ------------------------------------ /fsl/dbs/tbs_01.dbf /fs1/dbs/tbs_02.dbf . . . /fsl/dbs/tbs_09.dbf 9 rows selected.

Other notation

You must enter symbols other than brackets, braces, vertical bars, and ellipsis points as shown.

acctbal NUMBER(11,2); acct CONSTANT NUMBER(4) := 3;

Italics

Italicized text indicates placeholders or variables for which you must supply particular values.

CONNECT SYSTEM/system_password DB_NAME = database_name

UPPERCASE

Uppercase typeface indicates elements supplied by the system. We show these terms in uppercase in order to distinguish them from terms you define. Unless terms appear in brackets, enter them in the order and with the spelling shown. However, because these terms are not case sensitive, you can enter them in lowercase.

SELECT last_name, employee_id FROM employees; SELECT * FROM USER_TABLES; DROP TABLE hr.employees;

lowercase

Lowercase typeface indicates programmatic elements that you supply. For example, lowercase indicates names of tables, columns, or files.
Note: Some programmatic elements use a mixture of UPPERCASE and lowercase. Enter these elements as shown.

SELECT last_name, employee_id FROM employees; sqlplus hr/hr CREATE USER mjones IDENTIFIED BY ty3MU9;

Convention	Meaning	Example
[ ]	Brackets enclose one or more optional items. Do not enter the brackets.	DECIMAL (digits [ , precision ])
{ }	Braces enclose two or more items, one of which is required. Do not enter the braces.	{ENABLE \| DISABLE}
\|	A vertical bar represents a choice of two or more options within brackets or braces. Enter one of the options. Do not enter the vertical bar.	{ENABLE \| DISABLE} [COMPRESS \| NOCOMPRESS]
`...`	Horizontal ellipsis points indicate either: That we have omitted parts of the code that are not directly related to the example That you can repeat a portion of the code	CREATE TABLE ... AS subquery; SELECT col1, col2, ... , coln FROM employees;
. . .	Vertical ellipsis points indicate that we have omitted several lines of code not directly related to the example.	SQL> SELECT NAME FROM V$DATAFILE; NAME ------------------------------------ /fsl/dbs/tbs_01.dbf /fs1/dbs/tbs_02.dbf . . . /fsl/dbs/tbs_09.dbf 9 rows selected.
Other notation	You must enter symbols other than brackets, braces, vertical bars, and ellipsis points as shown.	acctbal NUMBER(11,2); acct CONSTANT NUMBER(4) := 3;
Italics	Italicized text indicates placeholders or variables for which you must supply particular values.	CONNECT SYSTEM/system_password DB_NAME = database_name
UPPERCASE	Uppercase typeface indicates elements supplied by the system. We show these terms in uppercase in order to distinguish them from terms you define. Unless terms appear in brackets, enter them in the order and with the spelling shown. However, because these terms are not case sensitive, you can enter them in lowercase.	SELECT last_name, employee_id FROM employees; SELECT * FROM USER_TABLES; DROP TABLE hr.employees;
`lowercase`	Lowercase typeface indicates programmatic elements that you supply. For example, lowercase indicates names of tables, columns, or files. Note: Some programmatic elements use a mixture of UPPERCASE and lowercase. Enter these elements as shown.	SELECT last_name, employee_id FROM employees; sqlplus hr/hr CREATE USER mjones IDENTIFIED BY ty3MU9;

Documentation Accessibility

Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For additional information, visit the Oracle Accessibility Program Web site at

http://www.oracle.com/accessibility/

Accessibility of Code Examples in Documentation

JAWS, a Windows screen reader, may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, JAWS may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.