The target that is used internally to register the JTA recovery manager to the Migration Manager.
Since | 7.0.0.0 |
Fully Qualified Interface Name | If you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:weblogic.management.configuration.JTAMigratableTargetMBean
For more information, see: |
Factory Methods | No factory methods. Instances of this MBean are created automatically. |
This section describes attributes that provide access to other MBeans.
The list of servers that are candidates to host the migratable services deployed to this migratable target. If the constrainedCandidateServers list is empty, all servers in the cluster are returned. If the constrainedCandidateServers list is not empty, only those servers will be returned. The user-preferred server will be the first element in the list.
Privileges | Read/Write |
Type | ServerMBean[] |
Relationship type: | Reference. |
Returns the cluster this singleton service is associated with.
Privileges | Read/Write |
Type | ClusterMBean |
Relationship type: | Reference. |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The (user-restricted) list of servers that can host the migratable services deployed to this migratable target. The migratable service will not be allowed to migrate to a server that is not in the returned list of servers.
For example, this feature may be used to configure two servers that have access to a dual-ported ported disk. All servers in this list must be part of the cluster that is associated with the migratable target.
Privileges | Read/Write |
Type | ServerMBean[] |
Relationship type: | Reference. |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Returns the name of the server that currently hosts the singleton service.
Privileges | Read only |
Type | ServerMBean |
Relationship type: | Reference. |
Returns the server that the user prefers the singleton service to be active on.
Privileges | Read/Write |
Type | ServerMBean |
Relationship type: | Reference. |
This section describes the following attributes:
A migratable service could fail to come up on every possible configured server. This attribute controls how many further attempts, after the service has failed on every server at least once, should be tried. Note that each attempt specified here indicates another full circuit of migrations amongst all the configured servers. So for a 3-server cluster, and a value of 2, a total of 4 additional migrations will be attempted. (the original server is never a valid destination)
Privileges | Read/Write |
Type | int |
Default Value | 2 |
Private property that disables caching in proxies.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Returns the MBean info for this MBean.
Deprecated.
Privileges | Read only |
Type | javax.management.MBeanInfo |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
For more information, see:
Privileges | Read/Write |
Type | java.lang.String |
Default Value | manual |
Legal Values |
|
Controls how long of a pause there should be between the migration attempts described in getAdditionalMigrationAttempts(). Note that this delay only happens when the service has failed to come up on every server. It does not cause any sort of delay between attempts to migrate otherwise.
Privileges | Read/Write |
Type | int |
Default Value | 300000 |
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName
:
Name=user-specified-name
Privileges | Read/Write |
Type | java.lang.String |
Specifies whether or not the post-deactivation script is allowed to run on a different machine.
Normally, when auto migration occurs, the post-deactivation script will be run on the service's current location, and the pre-activation script on the service's new location. If the current location is unreachable for some reason, this value will be checked to see if it is safe to run it on the service's new machine.
This is useful if the post-deactivation script controls access to a networked resource and does not need any data from the current machine.
Privileges | Read/Write |
Type | boolean |
Optional information that you can include to describe this configuration.
WebLogic Server saves this note in the domain's configuration
file (config.xml
) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<
. Carriage returns/line feeds are
preserved.
If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
Privileges | Read/Write |
Type | java.lang.String |
Specifies how many restart attempts to make before migrating the failed service.
Note that these are consecutive attempts. If the value is set to 6, and the service restart fails 5 times before succeeding, but then fails again later, it will not instantly migrate. Each failure gets its own count of restart attempts.
A value of 0 is identical to setting RestartOnFailure to false. A value of -1 indicates the service shouldnever be migrated; instead, it will be restarted until it either works or the server shuts down.
Privileges | Read/Write |
Type | int |
Default Value | 6 |
Returns the ObjectName under which this MBean is registered in the MBean server.
Deprecated.
Privileges | Read only |
Type | weblogic.management.WebLogicObjectName |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the immediate parent for this MBean
Privileges | Read/Write |
Type |
Specifies the path to the post-migration script to run after a
migratable target is fully deactivated. The script must be
in the
MIDDLEWARE_HOME/user_projects/domains/mydomain/bin/service_migration
directory.
After the migratable target is deactivated, if there is a script specified, and Node Manager is available, then the script will run. Specifying a script without an available Node Manager will result in an error upon migration.
Privileges | Read/Write |
Type | java.lang.String |
Specifies whether or not a failure during execution of the post-deactivation script is fatal to the migration.
If it is fatal, the migratable target will not be automatically migrated until an administrator manually migrates it to a server, thus reactivating it.
Note: Enabling this value will result in weakening the exactly-once guarantee. It is provided to prevent more dangerous data corruption if the post-deactivation script fails. Also if this value is enabled, then the script may be called more than once by the migration framework after the Migratable Target is deactivated or the server or machine hosting the Migratable Target crashed or is network partitioned. The script is expected not to return different exit values when invoked multiple times in such scenarios.
Privileges | Read/Write |
Type | boolean |
Default Value | true |
Specifies the path to the pre-migration script to run before a
migratable target is actually activated. The script must be
in the
MIDDLEWARE_HOME/user_projects/domains/mydomain/bin/service_migration
directory.
Before the migratable target is activated, if there is a script specified, and Node Manager is available, then the script will run. Specifying a script without an available Node Manager will result in an error upon migration.
If the script fails or cannot be found, migration will not proceed on the current server, and will be tried on the next suitable server. This could be the next server in the candidate server list, or in the cluster, if there is no candidate server list.
Privileges | Read/Write |
Type | java.lang.String |
Returns false if the MBean represented by this object has been unregistered.
Deprecated.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Specifies whether or not a failed service will first be deactivated and reactivated in place, instead of being migrated.
The number of restart attempts is controlled by NumberOfRestartAttempts . Once these restart attempts are exhausted, the service will migrate. A restarting migratable target will deactivate all services on it in order, then reactivate them all.
Privileges | Read/Write |
Type | boolean |
Specifies how many seconds to wait in between attempts to restart the failed service.
Privileges | Read/Write |
Type | int |
Default Value | 30 |
Whether continue to boot if cannot find the current owner of TRS to do failback. This attribute is only meaningful for servers in cluster.
If true: server will fail to boot under this situation.
If false: server will continue to boot without trying to do failback.
Privileges | Read/Write |
Type | boolean |
Returns the type of the MBean.
Privileges | Read only |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
This section describes the following operations:
Operation Name | "addConstrainedCandidateServer" |
Parameters | Object [] { constrainedCandidateServer }
where:
|
Signature | String [] {
"weblogic.management.configuration.ServerMBean" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
To insure that you are freezing the default value, invoke the
restoreDefaultValue
operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
Operation Name | "freezeCurrentValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Returns true if the specified attribute has been set explicitly in this MBean instance.
Operation Name | "isSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Operation Name | "removeConstrainedCandidateServer" |
Parameters | Object [] { constrainedCandidateServer }
where:
|
Signature | String [] {
"weblogic.management.configuration.ServerMBean" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue
operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
Operation Name | "restoreDefaultValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Restore the given property to its default value.
Operation Name | "unSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|