This MBean is an SNMP agent that can be targeted to instances of WebLogic Server.
With SNMP, you configure agents to gather and send data about managed resources in response to a request from managers. You can also configure agents to issue unsolicited reports to managers when they detect predefined thresholds or conditions on a managed resource.
In a WebLogic Server domain, you can choose a centralized or de-centralized model for SNMP monitoring and communication:
In a centralized model, you create an instance of this MBean and target it only to the Administration Server. This agent communicates with all Managed Servers in the domain. SNMP managers communicate only with the SNMP agent on the Administration Server. This model is convenient but introduces performance overhead in WebLogic Server. In addition, if the Administration Server is unavailable, you cannot monitor the domain through SNMP.
In a de-centralized model, you create an instance of this MBean and target it to each Managed Server that you want to monitor. (Alternatively, you can create multiple instances of this MBean and target each instance to an individual Managed Server.) Your SNMP manager must communicate with the agents on individual Managed Servers.
To support domains that were created with WebLogic Server release 9.2 and earlier, a domain also hosts a singleton SNMP agent whose scope is the entire domain (see SNMPAgentMBean ). SNMPAgentMBean offers the same features as an instance of this MBean (SNMPAgentDeploymentMBean) that you have targeted as described in the centralized model above. However, the underlying implementation of SNMPAgentMBean is different and it will eventually be deprecated. SNMPAgentMBean is overridden if you target an instance of this MBean to the Administration Server.
Since | 10.0.0.0 | ||
Fully Qualified Interface Name | If you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:weblogic.management.configuration.SNMPAgentDeploymentMBean
|
||
Factory Methods | |||
Access Points Inherited from DeploymentMBean |
Because this MBean extends or implements DeploymentMBean, you can also access this MBean by retrieving DeploymentMBeans. The following attributes contain DeploymentMBeans and its subtypes:
|
||
Access Points Inherited from SNMPAgentMBean |
Because this MBean extends or implements SNMPAgentMBean, you can also access this MBean by retrieving SNMPAgentMBeans. The following attributes contain SNMPAgentMBeans and its subtypes:
|
This section describes attributes that provide access to other MBeans.
The SNMPAttributeChangeMBeans
which describe the
MBean type and Attribute name for which attribute change
notification should be sent when an attribute change is
observed.
For more information, see:
Factory Methods | createSNMPAttributeChange
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupSNMPAttributeChange(String name)
Returns a |
Privileges |
Read/Write Setter method for this attribute is deprecated. 9.0.0.0 Instead, use standard JMX design patterns using <code>javax.management.MBeanServerConnection</code> interface. |
Type | SNMPAttributeChangeMBean[] |
Relationship type: | Containment. |
The SNMPCounterMonitorMBeans
which describe the
criteria for generating notifications based on JMX
CounterMonitor.
For more information, see:
Factory Methods | createSNMPCounterMonitor
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupSNMPCounterMonitor(String name)
Returns a |
Privileges |
Read/Write Setter method for this attribute is deprecated. 9.0.0.0 Instead, use standard JMX design patterns using <code>javax.management.MBeanServerConnection</code> interface. |
Type | SNMPCounterMonitorMBean[] |
Relationship type: | Containment. |
The SNMPGaugeMonitorMBeans
which describe the
criteria for generating notifications based on JMX
GaugeMonitor.
For more information, see:
Factory Methods | createSNMPGaugeMonitor
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupSNMPGaugeMonitor(String name)
Returns a |
Privileges |
Read/Write Setter method for this attribute is deprecated. 9.0.0.0 Instead, use standard JMX design patterns using <code>javax.management.MBeanServerConnection</code> interface. |
Type | SNMPGaugeMonitorMBean[] |
Relationship type: | Containment. |
The SNMPLogFilterMBeans
which describe filters for
generating notifications based on server log messages.
For more information, see:
Factory Methods | createSNMPLogFilter
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupSNMPLogFilter(String name)
Returns a |
Privileges |
Read/Write Setter method for this attribute is deprecated. 9.0.0.0 Instead, use standard JMX design patterns using <code>javax.management.MBeanServerConnection</code> interface. |
Type | SNMPLogFilterMBean[] |
Relationship type: | Containment. |
The SNMP agents for which this SNMP agent is a proxy.
SNMPProxyMBeans
describe settings for SNMP agents to
be proxied by this SNMP agent.
For more information, see:
Factory Methods | createSNMPProxy
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupSNMPProxy(String name)
Returns a |
Privileges |
Read/Write Setter method for this attribute is deprecated. 9.0.0.0 Instead, use standard JMX design patterns using <code>javax.management.MBeanServerConnection</code> interface. |
Type | SNMPProxyMBean[] |
Relationship type: | Containment. |
The SNMPStringMonitorMBeans
which describe the
criteria for generating notifications based on JMX
StringMonitor.
For more information, see:
Factory Methods | createSNMPStringMonitor
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupSNMPStringMonitor(String name)
Returns a |
Privileges |
Read/Write Setter method for this attribute is deprecated. 9.0.0.0 Instead, use standard JMX design patterns using <code>javax.management.MBeanServerConnection</code> interface. |
Type | SNMPStringMonitorMBean[] |
Relationship type: | Containment. |
WebLogic Server uses a trap destination to specify the SNMP management station and the community name used by the SNMP agent to send notifications. Select which trap destination(s) should be used in this WebLogic Server domain from the list of available trap destinations.
Factory Methods | createSNMPTrapDestination
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupSNMPTrapDestination(String name)
Returns a |
Privileges | Read only |
Type | SNMPTrapDestinationMBean[] |
Relationship type: | Containment. |
WebLogic Server uses a trap destination to specify the SNMP management station and the community name used by the SNMP agent to send trap notifications.
This attribute contains the collection of trap destinations that have been configured for this SNMP agent.
Deprecated.
Lookup Operation | lookupSNMPTrapDestination(String name)
Returns a |
Privileges | Read/Write |
Type | SNMPTrapDestinationMBean[] |
Relationship type: | Reference. |
You must select a target on which an MBean will be deployed from this list of the targets in the current domain on which this item can be deployed. Targets must be either servers or clusters. The deployment will only occur once if deployments overlap.
Privileges | Read/Write |
Type | TargetMBean[] |
Relationship type: | Reference. |
This section describes the following attributes:
The protocol that this SNMP agent uses to ensure that only authorized users can request or receive information about your WebLogic Server domain. Applicable only with SNMPv3.
The protocol also ensures message integrity and prevents masquerading and reordered, delayed, or replayed messages.
To use this protocol when receiving requests from SNMP managers, you must configure credential mapping in the WebLogic Server security realm. To use this protocol when sending responses or notifications, you must configure the security level of your trap destinations.
If you do not choose an authentication protocol, then the SNMP agent does not authenticate incoming SNMPv3 requests; anyone can use SNMPv3 to retrieve information about your WebLogic Server domain.
Available Since | Release 10.0.0.0 |
Privileges | Read/Write |
Type | java.lang.String |
Default Value | noAuth |
Legal Values |
|
Private property that disables caching in proxies.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Specifies whether this SNMP agent supports SNMPv1 and v2.
SNMPv1 and v2 use community strings for authentication. If you disable community strings for this SNMP agent, the agent will process only SNMPv3 requests. If an SNMP manager sends a v1 or v2 message, the agent discards the message and returns an error code to the manager.
Available Since | Release 10.0.0.0 |
Privileges | Read/Write |
Type | boolean |
Default Value | true |
The password (community name) that you want this SNMP agent to use to secure SNMPv1 or v2 communication with SNMP managers. Requires you to enable community based access for this agent.
SNMPv3 does not use community names. Instead, it encrypts user names and passwords in its PDUs.
When you use SNMPv1 or v2, there are two community names that are needed when the WebLogic SNMP agent and SNMP managers interact:
The name that you specify in this community prefix. All SNMP managers must send this name when connecting to this SNMP agent.
The community name that the SNMP manager defines. The SNMP agent must send this name when connecting to the manager. (You supply this community name when you configure a trap destination.)
In addition to using the community prefix as a password, an SNMP
agent on an Administration Server uses the prefix to qualify
requests from SNMP managers. Because the Administration Server can
access data for all WebLogic Server instances in a domain, a
request that specifies only an attribute name is potentially
ambiguous. For example, the attribute serverUptime
exists for each WebLogic Server instance in a domain. To clarify
requests that you send to SNMP agents on Administration Servers,
use the community prefix as follows:
To request the value of an attribute on a specific Managed
Server, when you send a request from an SNMP manager, append the
name of the server instance to the community prefix:
community_prefix@server_name
.
To request the value of an attribute for all server instances in
a domain, send a community name with the following form:
community_prefix
To secure access to the values of the WebLogic attributes when
using the SNMPv1 or v2 protocols, it is recommended that you set
community prefix to a value other than public
.
You cannot specify a null (empty) value for the community
prefix. If you delete the prefix value, WebLogic Server resets the
value to public
. If you do not want this agent to
receive SNMPv1 or v2 requests, instead of trying to set the
community prefix to a null value, disable community based access.
With community based access disabled, WebLogic Server ignores the
community prefix value.
Privileges | Read/Write |
Type | java.lang.String |
Default Value | public |
Secure value | A unique value, should not be public or private |
The minimum severity of debug messages that this SNMP agent generates.
The SNMP agent writes all debug messages to standard out; they are not written to the WebLogic Server log files. Debug messages provide a detailed description of the SNMP agent's actions. For example, the agent outputs a noncritical message each time it generates a notification.
Valid values are:
0
No debug messages.
1
Fatal messages only.
2
Critical and fatal messages.
3
Non-critical, critical, and, fatal messages.
Deprecated.
Privileges | Read/Write |
Type | int |
Default Value | 0 |
Legal Values |
|
Secure value | 0 |
A priority that the server uses to determine when it deploys an item. The priority is relative to other deployable items of the same type.
For example, the server prioritizes and deploys all EJBs before it prioritizes and deploys startup classes.
Items with the lowest Deployment Order value are deployed first. There is no guarantee on the order of deployments with equal Deployment Order values. There is no guarantee of ordering across clusters.
Privileges | Read/Write |
Type | int |
Default Value | 1000 |
Minimum value | 0 |
Maximum value | 2147483647 |
Return whether the MBean was created dynamically or is persisted to config.xml
Privileges | Read only |
Type | boolean |
Specifies whether this SNMP agent is enabled.
Privileges | Read/Write |
Type | boolean |
Return the unique id of this MBean instance
Privileges | Read only |
Type | long |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Configures this SNMP agent to send notifications as an INFORM instead of a TRAP. Requires you to specify the agent's SNMPTrapVersion as SNMPv2 or SNMPv3.
When an agent sends an INFORM notification, it waits for a confirmation response from the SNMP manager. If it does not receive a response, it resends the INFORM notification.
For more information, see:
Available Since | Release 10.0.0.0 |
Privileges | Read/Write |
Type | boolean |
The number of milliseconds that this SNMP agent will wait for a response to an INFORM notification.
If the agent does not receive a response within the specified interval, it will resend the notification.
Available Since | Release 10.0.0.0 |
Privileges | Read/Write |
Type | int |
Default Value | 10000 |
Minimum value | 3000 |
Maximum value | 30000 |
The listen address on which you want this SNMP agent to listen for incoming requests from SNMP managers that use the UDP protocol.
If not specified the Server's ListenAddress is used as the ListenAddress for the SNMPAgent.
Available Since | Release 12.2.1.1.0 |
Privileges | Read/Write |
Type | java.lang.String |
The number of milliseconds after which WebLogic Server invalidates its cache of SNMP security keys. Setting a high value creates a risk that users whose credentials have been removed can still access SNMP data.
An SNMP security key is an encrypted version of an SNMP agent's engine ID and an authentication password or privacy password. WebLogic Server generates one security key for each entry that you create in the SNMP credential map. When a WebLogic Server SNMP agent receives an SNMPv3 request, it compares the key that is in the request with its WebLogic Server keys. If it finds a match, it processes the request. The SNMP agent also encodes these keys in its responses and notifications. (You configure which keys are encoded when you create a trap destination.)
Instead of regenerating the keys for each SNMPv3 communication, WebLogic Server caches the keys. To make sure that the cache contains the latest set of SNMP credentials, WebLogic Server periodically invalidates the cache. After the cache is invalidated, the next time an SNMP agent requests credentials, WebLogic Server regenerates the cache.
Note that making a change to the credential map does not automatically update the cache. Instead, the cache is updated only after it has been invalidated.
For example, if you update a privacy password in an existing entry in the SNMP credential map, the SNMP agent is not aware of the new password until the key cache is invalidated and regenerated. An SNMP user with the old security password can still access WebLogic Server data until the cache is invalidated.
You can invalidate a key immediately instead of waiting for this invalidation interval to expire.
For more information, see:
Available Since | Release 10.0.0.0 |
Privileges | Read/Write |
Type | long |
Default Value | 3600000 |
Maximum value | 86400000 |
The port that this SNMP agent uses to communicate with its subagents.
The agent uses subagents to provide access to custom MBeans (MBeans that you create and register) and to other software components. WebLogic Server SNMP agents do not enable users to register their own subagents.
Available Since | Release 10.0.0.0 |
Privileges | Read/Write |
Type | int |
Default Value | 705 |
Minimum value | 1 |
Maximum value | 65535 |
The maximum number of times that this SNMP agent will resend INFORM notifications for which it has not received a response.
Available Since | Release 10.0.0.0 |
Privileges | Read/Write |
Type | int |
Default Value | 1 |
Minimum value | 1 |
Maximum value | 3 |
Returns the MBean info for this MBean.
Deprecated.
Privileges | Read only |
Type | javax.management.MBeanInfo |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The minimum number of seconds that this SNMP agent caches OIDs before checking if new ones have been added to the Management Information Base (MIB).
A MIB is a database of all objects that can be managed through SNMP. When you create a new WebLogic Server resource, the SNMP agent assigns a unique OID to the resource and adds it to the MIB. For example, when you create a new server, the SNMP agent adds an OID to the MIB.
This attribute is not used by the SNMP Agent anymore. The SNMP Agent retrieves internal notifications about MBean registrations in the WLS MBeanServers.
Deprecated.
Privileges | Read/Write |
Type | int |
Default Value | 120 |
Minimum value | 30 |
Maximum value | 65535 |
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName
:
Name=user-specified-name
Privileges | Read/Write |
Type | java.lang.String |
Optional information that you can include to describe this configuration.
WebLogic Server saves this note in the domain's configuration
file (config.xml
) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<
. Carriage returns/line feeds are
preserved.
Note: If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
Privileges | Read/Write |
Security roles | Write access is granted only to the following roles:
|
Type | java.lang.String |
Returns the ObjectName under which this MBean is registered in the MBean server.
Deprecated.
Privileges | Read only |
Type | weblogic.management.WebLogicObjectName |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the immediate parent for this MBean
Privileges | Read/Write |
Type |
The protocol that this SNMP agent uses to encrypt and unencrypt messages. Applicable only with SNMPv3. Requires you to also use an authentication protocol.
To use this protocol when sending responses or notifications, you must also configure the security level of your trap destinations.
If you do not choose a privacy protocol, then communication between this agent and managers can be viewed (but not altered) by unauthorized users.
For more information, see:
Available Since | Release 10.0.0.0 |
Privileges | Read/Write |
Type | java.lang.String |
Default Value | noPriv |
Legal Values |
|
Returns false if the MBean represented by this object has been unregistered.
Deprecated.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Specifies whether this SNMP agent sends automatically generated notifications to SNMP managers.
The SNMP agent generates automatic notifications when any of the following events occur:
The WebLogic Server instance that is hosting the SNMP agent starts.
This type of notification (coldStart) has no variable bindings.
A server instance starts or stops.
An SNMP agent on a Managed Server generates these notifications only when its host Managed Server starts or stops. An SNMP agent on an Administration Server generates these notifications when any server in the domain starts or stops.
These notification types (serverStart and serverShutdown) contain variable bindings to identify the server that started or stopped and the time at which the notification was generated.
For more information, see:
Privileges | Read/Write |
Type | boolean |
Default Value | true |
The multiplier used to calculate the interval at which this SNMP agent checks for newly started or shut down server instances.
You can enable the SNMP agent to automatically generate serverStartup and serverShutdown notifications when servers start or shut down. See SNMPAgentMBean#isSendAutomaticTrapsEnabled .
This status check value is multiplied by the MIB Data Refresh Interval to determine the interval:
interval = n * MibDataRefreshInterval
The SNMP Agent uses internal notifications to update itself when a server is restarted so there is no need to poll the server for their status.
For the most frequent interval, specify 1
as the
multiplier value.
Deprecated.
Privileges | Read/Write |
Type | int |
Default Value | 1 |
Minimum value | 1 |
Maximum value | 65535 |
Configures this SNMP agent to provide read-only access to MBean types that you have created and registered (custom MBeans).
If you enable this access, when you register a custom MBean in a WebLogic Server MBeanServer, this SNMP agent dynamically updates a runtime MIB module that WebLogic Server maintains for custom MBeans.
For each custom MBean type, WebLogic Server adds a table to the MIB module. For each instance of the custom MBean, it adds a table row. While WebLogic Server does not persist the MIB as a file or other data structure, the OIDs in the MIB remain constant across server sessions.
The MIB module for custom MBeans is managed by a subAgent. Its master agent is this WebLogic Server SNMP agent and it communicates with the master agent through the AgentX port.
For more information, see:
Available Since | Release 10.0.0.0 |
Privileges | Read/Write |
Type | boolean |
An identifier for this SNMP agent that is unique amongst all other SNMP agents in the current WebLogic Server domain.
If you use SNMPv3 to send messages to this SNMP agent, you must specify the SNMP engine ID when you configure the SNMP manager.
For an SNMP agent on an Administration Server, the default value is the name of the WebLogic Server domain. For an agent on a Managed Server, the default is the name of the server.
Available Since | Release 10.0.0.0 |
Privileges | Read/Write |
Type | java.lang.String |
The port on which you want this SNMP agent to listen for incoming requests from SNMP managers that use the UDP protocol.
SNMP managers can use this port to ping the SNMP agent and request the status of specific attributes.
If you target this SNMP agent to multiple server instances, and if two or more servers are running on the same computer, WebLogic Server will automatically increment this UDP port value by 1 for each agent. WebLogic Server never assigns port 162 because it is the default port that an agent uses to send notifications. In addition, if any port is already in use, WebLogic Server skips the port and assigns the next available port.
For example, if you use the default value of this attribute and then target this agent to ManagedServer1 and ManagedServer2, and if both servers are running on the same computer, then the agent on ManagedServer1 will listen on UDP port 161 and the agent on ManagedServer2 will listen on UDP port 163.
The incremented port number is not persisted in the domain's configuration; when WebLogic Server increments port numbers, it does so in the order in which servers are started on the same computer.
If WebLogic Server re-assigns the UDP port for an SNMP agent, look in the agent's SNMPAgentRuntimeMBean to see the agent's runtime UDP port.
SNMP agents can also communicate through the host server's TCP listen port (7001 by default) or through a TCP port that is configured by a custom network channel.
For more information, see:
Privileges | Read/Write |
Type | int |
Default Value | 161 |
Minimum value | 1 |
Maximum value | 65535 |
The SNMP notification version that this SNMP agent generates.
For more information, see:
Privileges | Read/Write |
Type | int |
Default Value | 1 |
Legal Values |
|
Return all tags on this Configuration MBean
Available Since | Release 12.2.1.0.0 |
Privileges | Read/Write |
Type | class java.lang.String[] |
Returns the type of the MBean.
Privileges | Read only |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
This section describes the following operations:
Adds a feature to the SNMPAttributeChange attribute of the SNMPAgentMBean object
Deprecated.
Operation Name | "addSNMPAttributeChange" |
Parameters | Object [] { attrchange }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPAttributeChangeMBean" } |
Returns |
boolean
|
Exceptions |
|
Adds a feature to the SNMPCounterMonitor attribute of the SNMPAgentMBean object
Deprecated.
Operation Name | "addSNMPCounterMonitor" |
Parameters | Object [] { countermonitor }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPCounterMonitorMBean" } |
Returns |
boolean
|
Exceptions |
|
Adds a feature to the SNMPGaugeMonitor attribute of the SNMPAgentMBean object
Deprecated.
Operation Name | "addSNMPGaugeMonitor" |
Parameters | Object [] { gaugemonitor }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPGaugeMonitorMBean" } |
Returns |
boolean
|
Exceptions |
|
Adds a feature to the SNMPLogFilter attribute of the SNMPAgentMBean object
Deprecated.
Operation Name | "addSNMPLogFilter" |
Parameters | Object [] { logfilter }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPLogFilterMBean" } |
Returns |
boolean
|
Exceptions |
|
Adds a feature to the SNMPProxy attribute of the SNMPAgentMBean object
Deprecated.
Operation Name | "addSNMPProxy" |
Parameters | Object [] { snmpProxy }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPProxyMBean" } |
Returns |
boolean
|
Exceptions |
|
Adds a single SNMPStringMonitorMBeans
to this SNMP
agent's collection.
Deprecated.
For more information, see:
Operation Name | "addSNMPStringMonitor" |
Parameters | Object [] { stringmonitor }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPStringMonitorMBean" } |
Returns |
boolean
|
Exceptions |
|
Adds an SNMPTrapDestination to the SNMPAgentMBean object
Deprecated.
Operation Name | "addSNMPTrapDestination" |
Parameters | Object [] { trapdestination }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPTrapDestinationMBean" } |
Returns |
boolean
|
Exceptions |
|
Add a tag to this Configuration MBean. Adds a tag to the current set of tags on the Configuration MBean. Tags may contain white spaces.
Operation Name | "addTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
You can add a target to specify additional servers on which the deployment can be deployed. The targets must be either clusters or servers.
Operation Name | "addTarget" |
Parameters | Object [] { target }
where:
|
Signature | String [] {
"weblogic.management.configuration.TargetMBean" } |
Returns |
boolean
|
Exceptions |
|
Adds a single trap destination to this SNMP agent's list of targeted trap destinations.
Deprecated.
For more information, see:
Operation Name | "addTargetedTrapDestination" |
Parameters | Object [] { trapdestination }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPTrapDestinationMBean" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
Note: To insure that you are freezing the default value, invoke
the restoreDefaultValue
operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
Operation Name | "freezeCurrentValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Return all properties' names whose value is inherited from template mbean. this is a convenient method to get inheritance info on multiple properties in one jmx call.
Operation Name | "getInheritedProperties" |
Parameters | Object [] { propertyNames }
where:
|
Signature | String [] {
"[Ljava.lang.String;" } |
Returns |
class |
Check if the value of a property is inherited from template mbean or not.
Operation Name | "isInherited" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Returns true if the specified attribute has been set explicitly in this MBean instance.
Operation Name | "isSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Deprecated.
Operation Name | "removeSNMPAttributeChange" |
Parameters | Object [] { attrchange }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPAttributeChangeMBean" } |
Returns |
boolean
|
Exceptions |
|
Deprecated.
Operation Name | "removeSNMPCounterMonitor" |
Parameters | Object [] { countermonitor }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPCounterMonitorMBean" } |
Returns |
boolean
|
Exceptions |
|
Deprecated.
Operation Name | "removeSNMPGaugeMonitor" |
Parameters | Object [] { gaugemonitor }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPGaugeMonitorMBean" } |
Returns |
boolean
|
Exceptions |
|
Deprecated.
Operation Name | "removeSNMPLogFilter" |
Parameters | Object [] { logfilter }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPLogFilterMBean" } |
Returns |
boolean
|
Exceptions |
|
Deprecated.
Operation Name | "removeSNMPProxy" |
Parameters | Object [] { snmpProxy }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPProxyMBean" } |
Returns |
boolean
|
Exceptions |
|
Deprecated.
Operation Name | "removeSNMPStringMonitor" |
Parameters | Object [] { stringmonitor }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPStringMonitorMBean" } |
Returns |
boolean
|
Exceptions |
|
Remove a tag from this Configuration MBean
Operation Name | "removeTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
Removes the value of the addTarget attribute.
For more information, see:
Operation Name | "removeTarget" |
Parameters | Object [] { target }
where:
|
Signature | String [] {
"weblogic.management.configuration.TargetMBean" } |
Returns |
boolean
|
Exceptions |
|
Deprecated.
Operation Name | "removeTargetedTrapDestination" |
Parameters | Object [] { trapdestination }
where:
|
Signature | String [] {
"weblogic.management.configuration.SNMPTrapDestinationMBean" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue
operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
Operation Name | "restoreDefaultValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Restore the given property to its default value.
Operation Name | "unSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|