Cause: Either property file does not exist or has invalid inputs.
Action: Make sure that the property file {0} has a valid entry.
Level: 1
Type: ERR
Impact: T2P
CLONE-26002: OHS cloning has failed.
Cause: OHS creation failed.
Action: Check the clone log file for more details.
Level: 1
Type: ERR
Impact: T2P
CLONE-26003: Error in validating listen host and port.
Cause: The causes were: {0}
Action: Make sure the listen host and port values provided are correct and the ports are free on the corresponding host.
Level: 1
Type: ERR
Impact: T2P
CLONE-26004: Moveplan validation failed for OHS component.
Cause: There was no movable component of type {0} and name {1} in the source moveplan.
Action: Make sure that the movable component type and name are not chnaged in the moveplan.
Level: 1
Type: ERR
Impact: T2P
CLONE-26005: Moveplan validation failed for OHS component.
Cause: The possible causes are: {0}
Action: Make sure that you have updated only values of READ_WRITE config properties of OHS component.
Level: 1
Type: ERR
Impact: T2P
CLONE-26006: Moveplan validation failed for OHS component.
Cause: Ipv6 addresses are not supported for ServerName directive.
Action: Make sure that you have provided valid value for ServerName.
Level: 1
Type: ERR
Impact: T2P
CLONE-26101: Following OHS components are configured in the domain :{0}.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26102: Performing copyConfig operation for component {0} ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26103: CopyConfig operation for component {0} is completed.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26104: Capturing configuration in the moveplan ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26105: Captured configuration in the moveplan.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26106: Archiving configuration files ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26107: Archive of configuration files completed.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26108: Capturing WebGate configuration, if any ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26110: Validating config properties of config group {0}...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26111: Config properties of config group {0} are validated and updated.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26113: Virtual port {0} is not in listen port list.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26114: Setting virtual port to {0}.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26115: Virtual port is not in the new listen port list. Leaving this virtual host port as it is.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26116: Updating webgate specific configuration, if any ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26117: The port {0} is not free. Assigning new port {1}.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26118: Archive of {0} files started, if any...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26119: Archive of {0} files finished.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26120: Restoring {0} files from the archive started ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26121: Restoring {0} files from the archive completed.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26122: Updating instance location, component name and Oracle Home ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26123: Instance location, component name and Oracle Home updated successfully.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26124: Updating directive and container...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26125: Directive and container are updated successfully.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26127: Performing validation of Listen and Virtualhost ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26128: Updating all xml files under {0}...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26129: All xml files under {0} are updated successfully.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26130: Updating all configuration files ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26131: All configuration files are updated successfully.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26133: Configuration file {0} does not exist. Unable to run file fixer.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26134: In source environment, configuration file {0} was outside of the instance home. In target environment, trying to restore to same location.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26135: An attempt was made to restore configuration file at {0}, but this path already exists. So configuration file will not be restored again.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26136: Extracting configuration file under {0}...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26137: Configuration file {0} is restored successfully.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26138: An attempt was made to restore {0} directive at {1}, but this path already exists. So directive will not be restored again.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26139: Extracting directive files under {0}...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26143: Obfuscating PLSQL database password, if exists.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26144: No configuration file carries PLSQL database password.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26145: Obfuscation of PLSQL database password did not happen.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26146: Configuration file {0} was not restored from the archive. Obfuscate will not be performed.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26147: Configuration file {0} does not exist. Obfuscate will not be performed.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26148: Updating password field in the configuration file {0}.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26149: Unable to retrieve password for {0} from file {1}.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26150: Unable to update password field in the configuration file {0}.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26151: Password field is updated in the configuration file {0} successfully.
CLONE-26165: Oradav password is obfuscated successfully.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26166: Unable to obfuscate oradav password.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26167: Oradav configuration file is updated successfully.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26168: Unable to update oradav configuration file.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26169: Updating webgate install directory, if present ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26170: Webgate install directory is updated successfully in configuration files.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26171: Validating config properties of config group {0}...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26172: Config properties of config group {0} are validated.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26181: Following OHS components are present in the moveplan :{0}.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26182: Executing pasteConfig for OHS component {0} started ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26183: Execution of pasteConfig for OHS component {0} completed.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26201: No OHS component is configured in the domain.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26202: Following OHS components are configured in the domain :{0}.
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26203: Restarting admin server so that configuration files will be in sync ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26205: Starting following components {0} as they were targeted for admin server in the src env and expecting that they are targeted for admin server in target env ...
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26207: OHS component {0} is started successfully..
Cause:
Action:
Level: 1
Type: INFO
Impact: T2P
CLONE-26301: Building OracleASComponent object for OHS component...
Cause:
Action:
Level: 1
Type: TRC
Impact: T2P
CLONE-26302: OracleASComponent object is created successfully.
Cause:
Action:
Level: 1
Type: TRC
Impact: T2P
CLONE-26303: Building OracleASComponentProperties object for OHS component ...
Cause:
Action:
Level: 1
Type: TRC
Impact: T2P
CLONE-26304: OracleASComponentProperties object is created successfully.
Cause:
Action:
Level: 1
Type: TRC
Impact: T2P
CLONE-26305: OHS parameters for pasteConfig operation are : {0}.
Cause:
Action:
Level: 1
Type: TRC
Impact: T2P
CLONE-26306: Printing {0} move plan ...
Cause:
Action:
Level: 1
Type: TRC
Impact: T2P
CLONE-26307: Updating configuration file {0} through file fixer ...