Configuration for IIOP properties.
Fully Qualified Interface Name | If you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:weblogic.management.configuration.IIOPMBean
|
||
Factory Methods | No factory methods. Instances of this MBean are created automatically. | ||
Access Points |
You can access this MBean from the following MBean attributes:
|
This section describes the following attributes:
Private property that disables caching in proxies.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The maximum number of seconds spent waiting for a complete IIOP message to be received. This timeout helps guard against denial of service attacks in which a caller indicates that they will be sending a message of a certain size which they never finish sending.
Deprecated.
Privileges | Read/Write |
Type | int |
Default Value | -1 |
Minimum value | -1 |
Maximum value | 480 |
The standard character code set that this server will publish as its native code set. (Older ORBs may have trouble interoperating with anything other than the default.)
Privileges | Read/Write |
Type | java.lang.String |
Default Value | US-ASCII |
Legal Values |
|
The default GIOP (General Inter-ORB Protocol) version that this server will negotiate for incoming connections. (You may have to modify the default to work with other vendor's ORBs.)
This attribute is useful for client orbs with broken GIOP 1.2 implementations.
Privileges | Read/Write |
Type | int |
Default Value | 2 |
Minimum value | 0 |
Maximum value | 2 |
The wide character code set that this server will publish as its native code set. (Older ORBs may have trouble interoperating with anything other than the default.)
Privileges | Read/Write |
Type | java.lang.String |
Default Value | UCS-2 |
Legal Values |
|
Return whether the MBean was created dynamically or is persisted to config.xml
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Enable getior servlet used to publish COS Naming Service IORs
Privileges | Read/Write |
Type | boolean |
Return the unique id of this MBean instance
Privileges | Read only |
Type | long |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The maximum number of seconds an IIOP connection is allowed to be idle before it is closed by the server. This timeout helps guard against server deadlock through too many open connections.
Deprecated.
Privileges | Read/Write |
Type | int |
Default Value | -1 |
Minimum value | -1 |
The maximum IIOP message size allowable in a message header. This attribute attempts to prevent a denial of service attack whereby a caller attempts to force the server to allocate more memory than is available thereby keeping the server from responding quickly to other requests.
An IIOP client can set this value using the
-Dweblogic.MaxMessageSize
property.
Deprecated.
Privileges | Read/Write |
Type | int |
Default Value | -1 |
Returns the MBean info for this MBean.
Deprecated.
Privileges | Read only |
Type | javax.management.MBeanInfo |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName
:
Name=user-specified-name
Privileges | Read/Write |
Type | java.lang.String |
Optional information that you can include to describe this configuration.
WebLogic Server saves this note in the domain's configuration
file (config.xml
) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<
. Carriage returns/line feeds are
preserved.
Note: If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
Privileges | Read/Write |
Security roles | Write access is granted only to the following roles:
|
Type | java.lang.String |
Returns the ObjectName under which this MBean is registered in the MBean server.
Deprecated.
Privileges | Read only |
Type | weblogic.management.WebLogicObjectName |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the immediate parent for this MBean
Privileges | Read/Write |
Type |
Returns false if the MBean represented by this object has been unregistered.
Deprecated.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Specify the value System Security. The following variables are affected. clientCertAuthentication, clientAuthentication, identityAssertion confidentiality, integrity. The value set in this MBean would only be picked up if the value set in RTD.xml is "config".
Privileges | Read/Write |
Type | java.lang.String |
Default Value | supported |
Legal Values |
|
Return all tags on this Configuration MBean
Available Since | Release 12.2.1.0.0 |
Privileges | Read/Write |
Type | class java.lang.String[] |
The transaction mechanism used by IIOP invocations. The default is the Object Transaction Service (OTS) required by Java EE 1.3.
Privileges | Read/Write |
Type | java.lang.String |
Default Value | OTS |
Legal Values |
|
Returns the type of the MBean.
Privileges | Read only |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Specify whether to use full Repository ID lists when sending value type information for custom-marshaled types. Full Repository ID lists allow C++ ORBS to truncate values to base types. For RMI-IIOP and Java ORBs doing this merely increases transmission overhead. JDK ORBs are known to have problems with these so setting this will prevent JDK ORB access from working.
Privileges | Read/Write |
Type | boolean |
Specity whether to use java serialization for marshalling objects. Setting this property improves performance when marshalling objects with very large object graphs.
Privileges | Read/Write |
Type | boolean |
Specify whether to advertise RMI objects and EJBs as supporting RMI-IIOP serial format version 2 for custom marshaled objects.
Privileges | Read/Write |
Type | boolean |
Specify whether to advertise RMI objects and EJBs as supporting stateful CSIv2. Stateful CSIv2 is more efficient than stateless, requiring only a single authentication step for each remote principal. Stateless CSIv2 requires per-request authentication. Stateful CSIv2 is not required by Java EE 1.3 and so some ORBs do not support it. Stateful CSIv2 is enabled by default. This property can be changed at the object-level by changing the object's <stateful-authentication> runtime descriptor property.
Privileges | Read/Write |
Type | boolean |
Default Value | true |
This section describes the following operations:
Add a tag to this Configuration MBean. Adds a tag to the current set of tags on the Configuration MBean. Tags may contain white spaces.
Operation Name | "addTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
Note: To insure that you are freezing the default value, invoke
the restoreDefaultValue
operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
Operation Name | "freezeCurrentValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Return all properties' names whose value is inherited from template mbean. this is a convenient method to get inheritance info on multiple properties in one jmx call.
Operation Name | "getInheritedProperties" |
Parameters | Object [] { propertyNames }
where:
|
Signature | String [] {
"[Ljava.lang.String;" } |
Returns |
class |
Check if the value of a property is inherited from template mbean or not.
Operation Name | "isInherited" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Returns true if the specified attribute has been set explicitly in this MBean instance.
Operation Name | "isSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Remove a tag from this Configuration MBean
Operation Name | "removeTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue
operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
Operation Name | "restoreDefaultValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Restore the given property to its default value.
Operation Name | "unSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|