Results for MINUTE


1 to 60 of 128 results. Prev  Next
Results per page:  20 | 40 |  60 


Event Test Reference Manual, 9i Release 2 (9.2.0.2)

HP-UX Event Tests

Average CPU Load (1 Minute)minute for the CPU(s) specified by the Host CPU(s) parameter, such as CPU0, or * (for all CPUs on the

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 34 of 134

min (IN)Minute value.

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 24 of 134

min (OUT)Minute value returned.

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 39 of 134

min (OUT)The retrieved minute value.

SNMP Support Reference Guide, 9i Release 2 (9.2.0.2)

Interpreting Variables of the Oracle Names MIB

Typical Range1 minute - ~ 3 months

SNMP Support Reference Guide, 9i Release 2 (9.2.0.2)

Interpreting Variables of the Oracle Names MIB

Typical Range1 minute - 10 hours

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 28 of 134

min (IN)Minute value to be set.

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 41 of 134

min (OUT)The retrieved time zone minute value.

Error Messages, 9i Release 2 (9.2.0.2)

ORA-01500 to ORA-02099

ORA-01838 seconds of minute conflicts with seconds in dayCause: A date specification contained both seconds of the minute and seconds in the day but the … values did not correspond. If both types of seconds are specified, the seconds of the minute value (SS … seconds of the minute value from the date specification or enter a value that corresponds to the given seconds in the day.

Error Messages, 9i Release 2 (9.2.0.2)

Recovery Manager Messages (RMAN)

RMAN-03020 async RPC test will take 1 minuteCause: This is an informational message. Action: No action required.

Oracle® C++ Call Interface Programmer's Guide, 9i Release 2 (9.2.0.2)

OCCI Classes and Methods, 22 of 22

getTimeZoneOffset()&minute) const; Parameters hour time zone hour minute time zone minute

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 60 of 134

OCIIntervalSetDaySecond()Purpose Sets day, hour, minute, and second in an interval.

Event Test Reference Manual, 9i Release 2 (9.2.0.2)

HP-UX Event Tests

OutputAverage load for the CPU during the last 1 minute.

Oracle® C++ Call Interface Programmer's Guide, 9i Release 2 (9.2.0.2)

OCCI Classes and Methods, 22 of 22

getTime()Return the hour, minute, second, and fractional second (fs) components Syntax void getTime(unsigned … int &hour, unsigned int &minute, unsigned int &second, unsigned int &fs) const; Parameters hour … hour component minute minute component second second component fs fractional second component

Oracle® C++ Call Interface Programmer's Guide, 9i Release 2 (9.2.0.2)

OCCI Classes and Methods, 22 of 22

setTimeZoneOffset()Sets the hour and minute offset for time zone. Syntax void setTimeZoneOffset(int hour, int minute … ); Parameters hour time zone hour. Valid values are -12 through 14. minute time zone minute. Valid values are -59 through 59.

Oracle® C++ Call Interface Programmer's Guide, 9i Release 2 (9.2.0.2)

OCCI Classes and Methods, 10 of 22

set()minute, int second, int fracsec); Parameters day Day component. hour Hour component. minute Minute

Error Messages, 9i Release 2 (9.2.0.2)

ORA-01500 to ORA-02099

ORA-01875 time zone minute must be between -59 and 59Cause: The time zone minute specified was not in the valid range. Action: Specify a time zone minute between -59 and 59.

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 57 of 134

OCIIntervalGetDaySecond()Purpose Gets values of day, hour, minute, and second from an interval.

Oracle® C++ Call Interface Programmer's Guide, 9i Release 2 (9.2.0.2)

OCCI Classes and Methods, 10 of 22

getMinute()This method returns the minute component of this interval. Syntax int getMinute() const;

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 41 of 134

OCIDateTimeGetTimeZoneOffset()Purpose Gets the time zone (hour, minute) portion of a datetime value.

Oracle® C++ Call Interface Programmer's Guide, 9i Release 2 (9.2.0.2)

OCCI Classes and Methods, 22 of 22

setTime()Sets the day, hour, minute, second and fractional second components for this timestamp. Syntax void … setTime(unsigned int hour, unsigned int minute, unsigned int second, unsigned int fs); Parameters … hour hour component. Valid values are 0 through 23. minute minute component. Valid values are 0

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 24 of 134

CommentsReturns the time information returned in the form: hour, minute and seconds.

Net Services Reference Guide, 9i Release 2 (9.2.0.2)

Oracle Names Control Utility

ExampleArguments None Example NAMESCTL> SHOW SAVE_CONFIG_INTERVAL Configuration will be saved in 1 minute 35 seconds

Messages Manual, 9i Release 2 (9.2.0.2)

Oracle Data Collection Service Messages (Second Tier)

ODG-05837 Error: cartridge not ready will retryCause: cartridge is unavailable, usually a database or a node is down. Action: none, the Data Gatherer will retry once a minute

Enterprise Manager Getting Started with the Oracle Management Pack for Oracle Applications, 9i Release 2 (9.2.0.2)

Oracle Applications Advanced Event Tests

Parameters1. Time Threshold (in minutes) for including requests in the pending queue backlog. Default is 1 minute.

Event Test Reference Manual, 9i Release 2 (9.2.0.2)

Management Pack for Oracle Applications Event Tests

Parameters1. Time Threshold (in minutes) for including requests in the pending queue backlog. Default is 1 minute.

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 41 of 134

CommentsThis function gets the time zone hour and the time zone minute portion out of a given datetime

Reference Guide for IBM DB2/400 V4R5 Migrations, 9i Release 2 (9.2.0.2)

Oracle and IBM DB2/400 V4R5 Compared

Date Data Types, minute, and second represents a 24-hour clock time value. Hour can range between 0 and 24, minute … can range between 0 and 59, and second can range between 0 and 59. Minute and second must be set to 0 … , minute, second, and millisecond represents a calendar date and 24-hour clock time value. The ranges … of

Application Developer's Guide, 9i Release 2 (9.2.0.2)

Performance Tuning

How often should I index new or updated records?not searchable. Other systems use hourly, ten minute, or five minute updates. See Also: Oracle Text

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 51 of 134

valid (OUT)(1=low) OCI_INTER_INVALID_MINUTE 0x100 Bad minute OCI_INTER_MINUTE_BELOW_VALID 0x200 Bad minute low

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 55 of 134

Returnsrange (0 to 23) if hour is out of range (0 to 11) if minute is out of range (0 to 59) if seconds in … minute out of range (0 to 59) if seconds in day out of range (0 to 86399) if the interval is invalid

Pro*COBOL® Programmer's Guide, 9i Release 2 (9.2.0.2)

Host Tables

Host Group Item Containing TablesPIC X(2) OCCURS 3 TIMES. 05 MINUTE PIC X(2) OCCURS 3 TIMES. the following indicator variable cannot … HOUR-IND PIC S9(4) COMP OCCURS 3 TIMES. 05 MINUTE-IND PIC S9(4) COMP OCCURS 3 TIMES.

Spatial User's Guide and Reference, 9i Release 2 (9.2.0.2)

Coordinate Systems (Spatial Reference Systems)

CONVERSION_FACTOR NUMBER The ratio of the specified unit to one Radian. For example, the ratio of Decimal…Second, Decimal Minute, Gon, Grad CONVERSION_FACTOR NUMBER The ratio of the specified unit to one

Utilities, 9i Release 2 (9.2.0.2)

Conventional and Direct Path Loads

Infrequent Data Savesgood value for ROWS. For example, if you can load 20,000 rows per minute, and you do not want to … repeat more than 10 minutes of work after an interruption, then set ROWS to be 200,000 (20,000 rows/minute * 10 minutes).

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 19 of 134

valid (OUT)/high bit (1=low) OCI_DATE_INVALID_MINUTE 0x100 Bad minute OCI_DATE_MINUTE_BELOW_VALID 0x200 Bad … minute low/high bit (1=low) OCI_DATE_INVALID_SECOND 0x400 Bad second OCI_DATE_SECOND_BELOW_VALID 0x800

Oracle® C++ Call Interface Programmer's Guide, 9i Release 2 (9.2.0.2)

OCCI Classes and Methods, 8 of 22

setDate()month = 1, unsigned int day = 1, unsigned int hour = 0, unsigned int minute = 0, unsigned int seconds … . Valid values are 0 through 23. minute The argument specifying the minutes value. Valid values are 0

Programmer's Guide, 9i Release 2 (9.2.0.2)

OCI Datatype Mapping and Manipulation Functions, 32 of 134

valid (OUT)(1=low) OCI_DT_INVALID_MINUTE 0x100 Bad minute OCI_DT_MINUTE_BELOW_VALID 0x200 Bad minute low/high

Oracle® C++ Call Interface Programmer's Guide, 9i Release 2 (9.2.0.2)

OCCI Classes and Methods, 8 of 22

getDate()This method returns the date in the form of the date components year, month, day, hour, minute

Administrator's Guide, 9i Release 2 (9.2.0.2)

Jobs

End Execution, minute, or AM/PM in the Time field and click on the scroll buttons to change the value. You can also type in new values.

Administrator's Guide, 9i Release 2 (9.2.0.2)

Jobs

Start Executionscroll buttons to change the value. You can also type in new values. Select the hour, minute, or AM/PM

Configuration Guide, 9i Release 2 (9.2.0.2)

Troubleshooting

Troubleshooting the Paging Servertime between retries is 1 minute. You can change this default setting by editing the

Concepts and Administration, 9i Release 2 (9.2.0.2)

Log Apply Services

6.4.2 When Is an Archive Gap Discovered?to the standby site. Every minute, the primary database polls its standby databases to see if there

Reference, 9i Release 2 (9.2.0.2)

Oracle Wait Events, 5 of 5

inactive sessionSESSION or internal request. Having posted a session that it should kill itself, wait for up to 1 minute

Advanced Replication, 9i Release 2 (9.2.0.2)

Master Replication Concepts and Architecture

delay_seconds = 0 (default)If a scheduled job with a 60 minute interval wakes up at 2:30 pm and checks the deferred

Oracle® C++ Call Interface Programmer's Guide, 9i Release 2 (9.2.0.2)

OCCI Classes and Methods, 22 of 22

Summary of Timestamp Methodsthe TimeStamp object. getTimeZoneOffset() Returns the time zone hour and minute offset value … setTime() Sets the day, hour, minute, second and fractional second components for this timestamp … . setTimeZoneOffset() Sets the hour and minute offset for time zone. subDS() Returns a IntervalDS

Pro*COBOL® Programmer's Guide, 9i Release 2 (9.2.0.2)

Datatypes and Host Variables

Referencing Host Variablesdeclaration 01 DEPARTURE. 05 HOUR PIC X(2). 05 MINUTE PIC X(2). the following statement is valid: EXEC … ) OCCURS 3 TIMES. 05 MINUTE PIC X(2) OCCURS 3 TIMES.... EXEC SQL INSERT INTO SCHEDULE (DHOUR, DMINUTE … follow: MOVE MINUTE IN DEPARTURE TO MINUTE-OUT. DISPLAY HOUR OF DEPARTURE. The COBOL IN (or OF) clause

Performance Tuning Guide and Reference, 9i Release 2 (9.2.0.2)

Understanding Operating System Resources

Understanding CPU1,200 transactions an hour, which is an average of 20 transactions a minute. If the demand rate were … constant and in this context, 20 transactions a minute can be understood as merely a minimum … requirement. If the peak rate you need to achieve is 120 transactions a minute, then you must configure a … % = 15% of available CPU

Oracle® C++ Call Interface Programmer's Guide, 9i Release 2 (9.2.0.2)

OCCI Classes and Methods, 10 of 22

IntervalDS Class*env, int day = 0, int hour = 0, int minute = 0, int second = 0, int fs = 0); day day component … . Valid values are -10^9 through 10^9. hour hour component. Valid values are -23 through 23. minute minute

Event Test Reference Manual, 9i Release 2 (9.2.0.2)

HP-UX Event Tests

Average CPU Load (15 Minutes)minute for the CPU(s) specified by the Host CPU(s) parameter, such as CPU0, or * (for all CPUs on the

Event Test Reference Manual, 9i Release 2 (9.2.0.2)

Management Pack for Oracle Applications Event Tests

ParametersThreshold (in minutes) for including requests in the pending queue backlog. Default is 1 minute.

Enterprise Manager Getting Started with the Oracle Management Pack for Oracle Applications, 9i Release 2 (9.2.0.2)

Oracle Applications Advanced Event Tests

ParametersThreshold (in minutes) for including requests in the pending queue backlog. Default is 1 minute.

SQL Reference, 9i Release 2 (9.2.0.2)

Basic Elements of Oracle SQL, 3 of 10

Interval Literalsinterval considers an interval of years to the nearest month. A DAY TO MINUTE interval considers an … interval of days to the nearest minute. If you have date data in numeric form, then you can use the … . For example, INTERVAL MINUTE TO DAY is not valid. As a result of this restriction, if SECOND is the … trailing field are as

Administrator's Guide, 9i Release 2 (9.2.0.2)

Events

Example:-minute load average on the system. The script performs this function by using the 'uptime' command … Warning level if the 5-minute load average on the machine reaches 0.005, and trigger at a Critical … level if the 5-minute load average reaches 0.001. Feel free to change these thresholds depending on … evaluated. By default this

Programmer's Guide, 9i Release 2 (9.2.0.2)

Datatypes

DATEthe DATE Datatype Byte 1 2 3 4 5 6 7 Meaning Century Year Month Day Hour Minute Second Example (for … . For this date, the century byte is 53, and the year byte is 88. The hour, minute, and second bytes … are in excess-1 notation. The hour byte ranges from 1 to 24, the minute and second bytes from 1 to 60

Application Developer's Guide - Advanced Queuing, 9i Release 2 (9.2.0.2)

Introduction to Oracle Advanced Queuing

Queue Monitorparameter aq_tm_processes. The queue monitor wakes up every minute, or whenever there is work to do

Precompilers, 9i Release 2 (9.2.0.2)

Meeting Program Requirements

Byte 1 2 3 4 5 6 7-hour format), minute, and second are stored in that order from left to right. Byte 1 2 3 4 5 6 7 … Meaning Century Year Month Day Hour Minute Second Example 17-OCT-1994 at 1:23:12 PM 119 194 10 17 14 24 … 13 Table 3 - 5. DATE Format The century and year bytes are in excess-100 notation. The hour, minute … byte ranges from 1 to

Programmer's Guide, 9i Release 2 (9.2.0.2)

Object-Relational Datatypes

Date (OCIDate)the struct represent the year, month, day, hour, minute, and second of the date. The specific

Oracle® C++ Call Interface Programmer's Guide, 9i Release 2 (9.2.0.2)

OCCI Classes and Methods, 8 of 22

Date Classyear = 1, unsigned int month = 1, unsigned int day = 1, unsigned int hour = 0, unsigned int minute = 0 … operator */ /* Methods on Date */ temp.getDate(year, month, day, hour, minute, second); temp.setMonths(2); IntervalDS inter = temp.daysBetween(sd);... }

Programmer's Guide, 9i Release 2 (9.2.0.2)

Object-Relational Datatypes

Datetime FunctionsOCIDateTimeGetTime() Gets the time (hour, minute, second, fractional second) out of a datetime value … () Gets the time zone (hour, minute) portion of a datetime value OCIDateTimeIntervalAdd() Adds an

Performance Tuning Guide and Reference, 9i Release 2 (9.2.0.2)

Dynamic Performance Views for Tuning

V$UNDOSTATavailable. Useful Columns for V$UNDOSTAT Endtime: End time for each ten minute interval UndoBlocksUsed … . Each subsequent row represents a ten minute interval. There is a total of 144 rows, spanning a 24 hour





Was this page helpful?

Integrated Cloud Applications & Platform Services