Oracle8i Error Messages Release 2 (8.1.6) A76999-01 |
|
ORA-07500 scglaa: $cantim unexpected return
Cause: VMS system service $CANTIM returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07501 scgtoa: $deq unexpected return
Cause: VMS system service $DEQ returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07502 scgcmn: $enq unexpected return
Cause: VMS system service $ENQ returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07503 scgcmn: $setimr unexpected return
Cause: VMS system service $SETIMR returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07504 scgcmn: $hiber unexpected return
Cause: VMS system service $HIBER returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07505 scggt: $enq parent lock unexpected return
Cause: VMS system service $ENQ returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07506 scgrl: $deq unexpected return on lockid string
Cause: VMS system service $DEQ returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07507 scgcm: unexpected lock status condition
Cause: A global locking system service returned an unexpected value.
Action: Check for system error message (if any) and refer to VMS documentation, or contact Oracle Customer Support.
ORA-07508 scgfal: $deq all unexpected return
Cause: VMS system service $DEQ returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07509 scgfal: $deq parent lock unexpected return
Cause: VMS system service $DEQ returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07510 scgbrm: $getlki unexpected return on lockid string
Cause: VMS system service $GETLKI returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07511 sscggtl: $enq unexpected return for master termination lock
Cause: VMS system service $ENQ returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07512 sscggtl: $enq unexpected return for client termination lock
Cause: VMS system service $ENQ returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07513 sscgctl: $deq unexpected return on cancel of term. lock
Cause: VMS system service $DEQ returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07514 scgcan: $deq unexpected return while canceling lock
Cause: VMS system service $DEQ returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07534 scginq: $getlki unexpected return on lockid string
Cause: VMS system service $GETLKI returned an unexpected value.
Action: Check for system error message and refer to VMS documentation.
ORA-07548 sftopn: Maximum number of files already open
Cause: Too many test files open. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07549 sftopn: $OPEN failure
Cause: VMS system service $OPEN failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07550 sftopn: $CONNECT failure
Cause: VMS system service $OPEN failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07551 sftcls: $CLOSE failure
Cause: VMS system service $CLOSE failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07552 sftget: $GET failure
Cause: VMS system service $GET failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07561 szprv: $IDTOASC failure
Cause: VMS system service $IDTOASC failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07562 sldext: extension must be 3 characters
Cause: An extension was found but it is of improper length. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07563 sldext: $PARSE failure
Cause: VMS system service $PARSE failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07564 sldext: wildcard in filename or extension
Cause: A wildcard was used in the file name.
Action: Re-enter the file name completely.
ORA-07565 sldext: $SEARCH failure
Cause: VMS system service $SEARCH failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07568 slspool: $OPEN failure
Cause: VMS system service $OPEN failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07569 slspool: $CLOSE failure
Cause: VMS system service $CLOSE failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07570 szrfc: $IDTOASC failure
Cause: VMS system service $IDTOASC failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07571 szrfc: $FIND_HELD failure
Cause: VMS system service $FIND_HELD failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07572 szrfc: insufficient rolename buffer space
Cause: An OS role name was too long.
Action: Re-define the role name to be of correct length.
ORA-07573 slkhst: could not perform host operation
Cause: VMS system service LIB$SPAWN failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07574 szrfc: $GETUAI failure
Cause: VMS system service $GETUAI failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07576 sspexst: $GETJPIW failure on process ID string
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07577 no such user in authorization file
Cause: An attempt was made to set an INTERNAL password (for either DBA or OPER privilege), but the corresponding VMS account (either ORA_sid_DBA or ORA_sid_OPER) has not been created yet.
Action: Add a VMS account for ORA_sid_DBA and/or ORA_sid_OPER before trying to set a password for them.
ORA-07578 szprv: $FIND_HELD failure
Cause: VMS system service $FIND_HELD failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07579 spini: $DCLEXH failure
Cause: VMS system service $PARSE failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07580 spstp: $GETJPIW failure
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07581 spstp: cannot derive SID from unexpected process name
Cause: A background process did not have name of correct form.
Action: If the job name was changed, restore it. Otherwise, this is an internal error; report it to Oracle Customer Support.
ORA-07582 spstp: ORA_SID has illegal value
Cause: The ORA_SID must exist and be less than 6 characters.
Action: Consult the VMS Installation guide for information on setting the SID.
ORA-07584 spdcr: invalid value for ORA_sid_(proc_)PQL$_item
Cause: A logical name used to set a detached process quota value has an invalid value (probably non-numeric).
Action: Examine the values of these logical names, correct the one in error, and retry.
ORA-07585 spdcr: $PARSE failure
Cause: VMS system service $PARSE failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07586 spdcr: $SEARCH failure
Cause: VMS system service $SEARCH failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07587 spdcr: $CREPRC failure
Cause: VMS system service $CREPRC failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07588 spdcr: $GETJPIW get image name failure
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07589 spdde: system ID not set
Cause: The logical name ORA_SID does not translate to a valid value.
Action: Check the value of ORA_SID in the process that gets the error, and correct the installation or command procedures that caused ORA_SID to be set incorrectly.
ORA-07590 spdde: $DELPRC failure
Cause: VMS system service $DELPRC failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07591 spdde: $GETJPIW failure
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07592 sspgprv: Error obtaining required privileges
Cause: While obtaining needed privileges, an error was returned from SYS$SETPRV. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07593 ssprprv: Error release privileges
Cause: While releasing privileges, an error was returned from SYS$SETPRV. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07594 spiip: $GETJPIW failure
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07595 sppid: $GETJPIW failure
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07596 sptpa: $GETJPIW failure
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07597 spguns: $GETJPIW failure
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07598 spwat: $SETIMR failure
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07599 spwat: $SCHDWK failure
Cause: VMS system service $SCHDWK failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07600 slkmnm: $GETSYIW failure
Cause: VMS system service $GETSYIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07601 spguno: $GETJPIW failure
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07602 spgto: $GETJPIW failure
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07605 szprv: $ASCTOID failure
Cause: VMS system service $ASCTOID failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07606 szprv: $CHKPRO failure
Cause: VMS system service $CHKPRO failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07607 szaud: $SNDOPR failure
Cause: VMS system service $SNDOPR failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07608 szprv: $GETUAI failure
Cause: VMS system service $GETUAI failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07609 szprv: $HASH_PASSWORD failure
Cause: VMS system service $HASH_PASSWORD failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07610 $GETJPIW failed in retrieving the user's MAC priviledges
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07612 $GETUAI failed in retrieving the user's clearance level
Cause: VMS system service $GETUAI failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07613 $GETJPIW failed in retrieving the user's process label
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07614 $CHANGE_CLASS failed in retrieving the user's process label
Cause: VMS system service $CHANGE_CLASS failed.
Action: Examine system error message and refer to SEVMS documentation.
ORA-07615 $CHANGE_CLASS failed in retrieving the specified file label
Cause: VMS system service $CHANGE_CLASSS failed.
Action: Examine system error message and refer to SEVMS documentation.
ORA-07616 $CHANGE_CLASS failed in retrieving the specified device label
Cause: VMS system service $CHANGE_CLASS failed.
Action: Examine system error message and refer to SEVMS documentation.
ORA-07617 $FORMAT_CLASS failed translating the binary label to a string
Cause: VMS system service $FORMAT_CLASS failed because the given binary classification was not valid.
Action: Examine system error message and refer to SEVMS documentation.
ORA-07618 $IDTOASC failed translating a secrecy level
Cause: VMS system service $IDTOASC failed while looking up the string representation in the rights database of a secrecy level.
Action: Define the entry in the rights database which the binary label you specified references.
ORA-07619 $IDTOASC failed translating an integrity level
Cause: VMS system service $IDTOASC failed while looking up the string representation in the rights database of an integrity level.
Action: Define the entry in the rights database which the binary label you specified references.
ORA-07620 smscre: illegal database block size
Cause: An illegal database block size was specified in the parameter file. It must be positive, a multiple of 512, and less than the maximum physical i/o data size.
Action: Change DB_BLOCK_SIZE in the parameter file to conform to these limits.
ORA-07621 smscre: illegal redo block size
Cause: An illegal redo log buffer size was specified in the parameter file. It must be positive and a multiple of 512.
Action: Change LOG_BUFFER in the parameter file to conform to these limits.
ORA-07622 smscre: $CREATE failure
Cause: While creating the system global area (SGA) backing file, VMS system service $CREATE failed.
Action: Examine the system error message and refer to VMS documentation.
ORA-07623 smscre: $CRMPSC failure
Cause: While creating the system global area (SGA), VMS system service $CRMPSC failed.
Action: Examine the system error message and refer to VMS documentation.
ORA-07624 smsdes: $DGBLSC failure
Cause: While deleting the system global area (SGA), VMS system service $DGBLSC failed.
Action: Examine the system error message and refer to VMS documentation.
ORA-07625 smsget: $MGBLSC failure
Cause: While mapping the system global area (SGA) during logon, VMS system service $MGBLSC failed. The usual reason is that Oracle has not been started up.
Action: Examine the system error message and refer to VMS documentation. Start Oracle if it is not already started.
ORA-07626 smsget: sga already mapped
Cause: An attempt to map the SGA during logon failed because it was already mapped. This is an internal error.
Action: Exit your program and try again, and report this to Oracle Customer Support.
ORA-07627 smsfre: $CRETVA failure
Cause: While unmapping the system global area (SGA) during logoff, VMS system service $CRETVA failed.
Action: Examine the system error message and refer to VMS documentation.
ORA-07628 smsfre: sga not mapped
Cause: An attempt to unmap the SGA during logoff failed because it was not mapped. This is an internal error.
Action: Exit your program and try again, and report this to Oracle Customer Support.
ORA-07629 smpall: $EXPREG failure
Cause: While extending the program global area (PGA), VMS system service $EXPREG failed. This often happens when the virtual memory page count quota is exceeded.
Action: Examine the system error message and refer to VMS documentation.
ORA-07630 smpdal: $DELTVA failure
Cause: While deleting the program global area (PGA) during logoff, VMS system service $DELTVA failed.
Action: Examine the system error message and refer to VMS documentation.
ORA-07631 smcacx: $EXPREG failure
Cause: While creating or extending a context area, VMS system service $EXPREG failed. This often happens when the virtual memory page count quota is exceeded.
Action: Examine the system error message and refer to VMS documentation.
ORA-07632 smsrcx: $DELTVA failure
Cause: While deleting a context area, VMS system service $DELTVA failed.
Action: Examine the system error message and refer to VMS documentation.
ORA-07633 smsdbp: illegal protection value
Cause: The buffer debug function was called with an illegal value. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07634 smsdbp: $CRETVA failure
Cause: While attempting to set protection in the database buffer debug mechanism, VMS system service $CRETVA failed.
Action: Contact Oracle Customer Support.
ORA-07635 smsdbp: $SETPRT failure
Cause: While attempting to set protection in the database buffer debug mechanism, VMS system service $SETPRT failed.
Action: Contact Oracle Customer Support.
ORA-07636 smsdbp: $MGBLSC failure
Cause: While attempting to set protection in the database buffer debug mechanism, VMS system service $MGBLSC failed.
Action: Contact Oracle Customer Support.
ORA-07637 smsdbp: buffer protect option not specified when sga created
Cause: An attempt was made to change the buffer protect mode when the SGA was not created with buffer protect debug option. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07638 smsget: SGA pad area not large enough for created SGA
Cause: An attempt was made to map an SGA with software in which the SGA pad area is not large enough.
Action: Create a smaller SGA, or relink the software with a larger pad.
ORA-07639 smscre: SGA pad area not large enough (string bytes required)
Cause: An attempt was made to create an SGA with software in which the SGA pad area is not large enough.
Action: Create a smaller SGA, or relink the software with a larger pad.
ORA-07640 smsget: SGA not yet valid. Initialization in progress
Cause: An attempt was made to map to the SGA while it was being initialized.
Action: Wait until initialization is complete, and try again.
ORA-07641 smscre: Unable to use the system pagefile for the SGA
Cause: The system global area (SGA) backing file could not be allocated using the system pagefile because the system-wide limit on global pages has been exceeded.
Action: Either increase the VMS system parameter GBLPAGFIL or use a disk file as the SGA backing file.
ORA-07642 smprtset: $CMKRNL failure
Cause: While attempting to set the protection of a region of memory, an error was returned from the $CMKRNL system service.
Action: Examine the system error message and refer to VMS documentation.
ORA-07643 smsalo: SMSVAR is invalid
Cause: This is an internal error.
Action: Report this error to Oracle Customer Support; provide your INIT.ORA file.
ORA-07645 sszfsl: $CHANGE_CLASS failure
Cause: While attempting to set the label on a file, SEVMS service $CHANGE_CLASS failed.
Action: Examine the system message and refer to SEVMS system documentation.
ORA-07646 sszfck: $CREATE failure
Cause: While attempting to create a file, VMS system service $CREATE failed.
Action: Examine the system message and refer to VMS system documentation.
ORA-07647 sszfck: $OPEN failure
Cause: While attempting to reopen a file, VMS system service $OPEN failed.
Action: Examine the system message and refer to VMS system documentation.
ORA-07650 sigunc: $GETJPIW failure
Cause: While attempting to get the user's terminal device name, user name, user program name, or process name during logon, VMS system service $GETJPIW failed.
Action: Examine the system error message and refer to VMS documentation.
ORA-07655 slsprom:$TRNLOG failure
Cause: While attempting to translate SYS$INPUT during a prompt for a password, VMS system service $TRNLOG failed.
Action: Examine the system error message and refer to VMS documentation.
ORA-07656 slsprom:$GETDVI failure
Cause: While attempting to get device characteristics during a prompt for a password, VMS system service $GETDVI failed.
Action: Examine the system error message and refer to VMS documentation.
ORA-07657 slsprom:$ASSIGN failure
Cause: While prompting for a password, VMS system service $ASSIGN failed.
Action: Examine the system error message and refer to VMS documentation.
ORA-07658 slsprom:$QIOW read failure
Cause: While prompting for a password, VMS system service $QIOW failed.
Action: Examine the system error message and refer to VMS documentation.
ORA-07665 ssrexhd: recursive exception encountered string string string string string string
Cause: A VMS exception occurred while executing in the Oracle exception handler. The message includes the signal number, first and second signal arguments, and exception PC, PSL and R0. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07670 $IDTOASC failed translating a secrecy category
Cause: VMS system service $IDTOASC failed while looking up the string representation in the rights database of a secrecy category.
Action: Define the entry in the rights database which the binary label you specified references.
ORA-07671 $IDTOASC failed translating an integrity category
Cause: VMS system service $IDTOASC failed while looking up the string representation in the rights database of an integrity category.
Action: Define the entry in the rights database which the binary label you specified references.
ORA-07672 $PARSE_CLASS failed translating the string into a binary label
Cause: SEVMS system service $PARSE_CLASS failed because the given string did not represent a valid classification.
Action: Examine system error message and refer to SEVMS documentation.
ORA-07680 sou2os: another call to ORACLE currently executing
Cause: A call to the Oracle shared image entry point occurred from within the shared image. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07681 sou2os: An error occurred while initializing Oracle
Cause: While attempting to set up the dispatch vectors for the shared image, an error occurred. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07682 sou2os: set kernel dispatch fail err
Cause: During Oracle shared image entry, a dispatch to kernel mode failed.
Action: Make sure that your shared image is installed with the CMKRNL privilege, then contact Oracle Customer Support.
ORA-07683 sou2os: $SETPRV reset error
Cause: During an attempt to restore user privileges at Oracle shared image exit, VMS system service $SETPRV failed. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07684 sou2os: supervisor stack reset error
Cause: During an attempt to restore the supervisor-mode stack at Oracle shared image exit, VMS system service $SETSTK failed. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07685 sou2os: supervisor stack set error
Cause: During an attempt to set the Oracle supervisor-mode stack at Oracle shared image entry, VMS system service $SETSTK failed. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07700 sksarch: interrupt received
Cause: An interrupt was received while archiving the logs.
Action: Retry the operation.
ORA-07701 sksatln: internal exception: output buffer too small
Cause: Overflow of buffer for parsing archive control text string. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07702 unrecognized device type in archive text
Cause: Unrecognized device type in archive text. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07703 error in archive text: need '/' after device type
Cause: The archive control text in the ARCHIVE command is invalid; the device type (to indicate a file or tape) must be followed by a '/'.
Action: Refer to the Oracle8i Backup and Recovery Guide for the proper syntax of the text.
ORA-07704 error in archive text: need ':' after device name
Cause: The archive control text in the ARCHIVE command is invalid; the device name must be followed by a ':'.
Action: Refer to the Oracle8i Backup and Recovery Guide for the proper syntax of the text.
ORA-07705 sksaprs: device name buffer too small
Cause: The buffer supplied for the device name is too small. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07706 error in archive text: need disk file name
Cause: The archive control text in the ARCHIVE command is invalid; the disk file name is missing.
Action: Refer to the Oracle8i Backup and Recovery Guide for the proper syntax of the text.
ORA-07707 error in archive text: need tape label name
Cause: The archive control text in the ARCHIVE command is invalid; the tape label name is missing.
Action: Refer to the Oracle8i Backup and Recovery Guide for the proper syntax of the text.
ORA-07708 sksaprs: tape label name buffer too small
Cause: The buffer supplied for the tape label is too small. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07709 sksaprs: archiving to a remote host is not allowed
Cause: The user specified a remote disk for archiving via DECnet.
Action: Archive to a disk on the local host.
ORA-07710 sksaprs: file name buffer too small
Cause: The buffer supplied for the file name is too small. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07713 sksamtd: could not mount archival device (SYS$MOUNT failure)
Cause: VMS system service SYS$MOUNT failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07715 sksadtd: could not dismount archival device (SYS$DISMNT failure)
Cause: VMS system service SYS$DISMNT failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07716 sksachk: invalid device specification for ARCHIVE
Cause: VMS system service SYS$GETDVI failed".
Action: Specify a valid device in ARCHIVE control string.
ORA-07717 sksaalo: error allocating memory
Cause: VMS system service LIB$GET_VM failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07718 sksafre: error freeing memory
Cause: VMS system service LIB$FREE_VM failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07721 scgcm: not enough OS resource to obtain system enqueue
Cause: A call to SYS$ENQ returned an error indicating that the operating system lacked the resources necessary to create a lock. This is caused by the messages SS$_EXENQLM or SS$_INSFMEM.
Action: Free up some of the required resource to allow the creation of the required lock.
ORA-07740 slemop: incorrect handle size (programming error)
Cause: Structures used for reading error message files do not match. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07741 slemop: $OPEN failure
Cause: VMS system service $OPEN failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07742 slemop: $CONNECT failure
Cause: VMS system service $CONNECT failed.
Action: Examine system error message and refer to VMS documentation.
ORA-07743 slemop: incorrect error file attributes
Cause: An error message file is of incorrect format.
Action: Unless an error file has been changed, report this to Oracle.
ORA-07744 slemcl: invalid error message file handle
Cause: Seal in passed in handle does not match correct value. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07745 slemcl: $CLOSE failure
Cause: VMS system service $CLOSE failed.
Action: Check system error and refer to VMS documentation.
ORA-07746 slemrd: invalid error message file handle
Cause: seal in passed in handle does not match correct value. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07747 slemrd: $READ failure
Cause: VMS system service $READ failed.
Action: Check system error and refer to VMS documentation.
ORA-07750 slemcr: fopen failure
Cause: An attempt to create a message file failed. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07751 slemcr: malloc failure
Cause: An attempt to allocate a cache for a newly-created message file failed. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07753 slemcf: fseek before write failure
Cause: An attempt to seek before writing a message file cache element failed. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07754 slemcf: fwrite failure
Cause: An attempt to write a message file cache element failed. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07755 slemcf: fseek before read failure
Cause: An attempt to seek before reading a message file cache element failed. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07756 slemcf: fread failure
Cause: An attempt to read a message file cache element failed. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07757 slemcc: invalid handle
Cause: The seal in a passed-in handle does not match correct value. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07758 slemcw: invalid handle
Cause: The seal in a passed-in handle does not match correct value. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07759 slemtr: invalid destination
Cause: The destination string provided to the function is too short. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07760 slemtr: $open failure
Cause: The $open service failed. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07800 slbtpd: invalid number
Cause: An impossible request for binary to decimal conversion was made.
Action: This conversion cannot be performed.
ORA-07801 slbtpd: invalid exponent
Cause: An impossible request for binary to decimal conversion was made.
Action: This conversion cannot be performed.
ORA-07802 slbtpd: overflow while converting to packed decimal
Cause: An impossible request for binary to decimal conversion was made.
Action: This conversion cannot be performed.
ORA-07803 slpdtb: invalid packed decimal nibble
Cause: An impossible request for decimal to binary conversion was made.
Action: This conversion cannot be performed.
ORA-07804 slpdtb: number too large for supplied buffer
Cause: An impossible request for decimal to binary conversion was made.
Action: This conversion cannot be performed.
ORA-07820 sspscn: SYS$CRELNM failure
Cause: An error was returned from the SYS$CRELNM function.
Action: Check system error and refer to VMS documentation.
ORA-07821 sspsdn: SYS$DELLNM failure
Cause: An error was returned from the SYS$DELLNM function.
Action: Check system error and refer to VMS documentation.
ORA-07822 sspscm: SYS$CREMBX failure
Cause: An error was returned from the SYS$CREMBX function while trying to create the process dump mailbox.
Action: Check system error and refer to VMS documentation.
ORA-07823 sspsqr: $QIO failure
Cause: An error was returned from $QIO while trying to queue a read to the process dump mailbox.
Action: Check system error and refer to VMS documentation.
ORA-07824 sspain: $SETIMR failure
Cause: An error was returned from SYS$SETIMR while trying to queue a process spin-watch timer.
Action: Check system error and refer to VMS documentation.
ORA-07825 sspsck: $QIO failure at AST level
Cause: An error was returned from SYS$QIO while trying to read the process dump mailbox.
Action: Check system error and refer to VMS documentation.
ORA-07826 sspscm: SYS$GETDVIW failure
Cause: An error was returned from SYS$GETDVIW while trying to get information about the process dump mailbox.
Action: Check system error and refer to VMS documentation.
ORA-07840 sllfop: LIB$GET_VM failure
Cause: An error was returned from LIB$GET_VM while attempting to allocate memory for an I/O vector.
Action: Check system error and refer to VMS documentation.
ORA-07841 sllfop: SYS$OPEN failure
Cause: An error was returned from SYS$OPEN while attempting to open the datafile for reading.
Action: Check system error and refer to VMS documentation.
ORA-07842 sllfcl: SYS$CLOSE failure
Cause: An error was returned from SYS$CLOSE while attempting to close the input datafile.
Action: Check system error and refer to VMS documentation.
ORA-07843 sllfcl: LIB$FREE_VM failure
Cause: An error was returned from LIB$FREE_VM while attempting to free the memory for the I/O vector.
Action: Check system error and refer to VMS documentation.
ORA-07844 sllfop: LIB$GET_VM failure
Cause: An error was returned from LIB$GET_VM while attempting to allocate memory for data and index buffers.
Action: Check system error and refer to VMS documentation.
ORA-07845 sllfcl: LIB$FREE_VM failue
Cause: An error was returned from LIB$FREE_VM while attempting to free memory used by data and index buffers.
Action: Check system error and refer to VMS documentation.
ORA-07846 sllfop: string byte record too big for string byte user buffer
Cause: The longest record in the file will not fit into the largest data buffer that can be allocated.
Action: Modify the RMS file to have smaller records.
ORA-07847 sllfop: $CONNECT failure
Cause: An error was returned by SYS$CONNECT while attempting to open the datafile.
Action: Check system error and refer to VMS documentation.
ORA-07848 sllfrb: $GET failure
Cause: An error was returned by SYS$GET while attempting to read the datafile.
Action: Check system error and refer to VMS documentation.
ORA-07849 sllfsk: $GET failure
Cause: An error was returned by SYS$GET while attempting to skip records in the input file.
Action: Check system error and refer to VMS documentation.
ORA-07850 sllfop: bad option
Cause: You are using a bad option to loader Fixed= is one legal option. Check documentation for others.
Action: Check documentation.
ORA-07860 osnsoi: error setting up interrupt handler
Cause: An error occurred while setting up the control interrupt handler. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-07880 sdopnf: internal error
Cause: A list of all files open by this process could not be obtained. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-08000 maximum number of session sequence lists exceeded
Cause: The sequence parent state objects for this session are all used. This is an internal error.
Action: Quit the session and begin a new one.
ORA-08002 sequence string.CURRVAL is not yet defined in this session
Cause: Sequence CURRVAL has been selected before sequence NEXTVAL.
Action: Select NEXTVAL from the sequence before selecting CURRVAL.
ORA-08003 sequence string.NEXTVAL exceeds internal limits
Cause: The sequence was created with unsafe values for some of the parameters. The calculation of NEXTVAL cannot be made because it exceeds the legal representation size.
Action: Alter or re-create the sequence number with legal limits.
ORA-08004 sequence string.NEXTVAL string stringVALUE and cannot be instantiated
Cause: Instantiating NEXTVAL would violate one of MAX/MINVALUE.
Action: Alter the sequence so that a new value can be requested.
ORA-08005 specified row does not exist
Cause: A row with the given ROWID does not exist in any of the tables given.
Action: Check the query for misspellings of table names and the ROWID.
ORA-08006 specified row no longer exists
Cause: The row has been deleted by another user since the operation began.
Action: Retry the operation.
ORA-08008 another instance is mounted with USE_ROW_ENQUEUES = string
Cause: The shared instance being started does not have the same value for USE_ROW_ENQUEUES as already running instances.
Action: Ensure that all instances' INIT.ORA files specify the same value for the parameter USE_ROW_ENQUEUES.
ORA-08100 index is not valid - see trace file for diagnostics
Cause: Validate Index detected an inconsistency in its argument index.
Action: Send trace file to Oracle Customer Support.
ORA-08101 index key does not exist root dba string, dba string (string)
Cause: This is an internal error; possible inconsistency in index.
Action: Send trace file to Oracle Customer Support, along with information on reproducing the error.
ORA-08102 index key not found, obj# string, dba string (string)
Cause: This is an internal error; possible inconsistency in index.
Action: Send trace file to Oracle Customer Support, along with information on reproducing the error.
ORA-08103 object no longer exists
Cause: The object has been deleted by another user since the operation began.
Action: Remove references to the object.
ORA-08104 this index object string is being online built or rebuilt
Cause: The index is being created or rebuild or waited for recovering from the online (re)build.
Action: Wait the online index build or recovery to complete.
ORA-08105 Oracle event to turn off smon cleanup for online index build
Cause: Set this event only under the supervision of Oracle development.
Action: Debugging only.
ORA-08106 can not create journal table string.string
Cause: Online index builder cannot create its journal table.
Action: Rename your table in conflict.
ORA-08108 may not build or rebuild this type of index online
Cause: Only support normal index or IOT top-level index.
Action: Change your index type.
ORA-08109 nosort is not a supported option for online index build
Cause: May not specify NOSORT for online index build.
Action: Get rid of NOSORT in the index creation command.
ORA-08110 Oracle event to test SMON cleanup for online index build
Cause: Oracle Kernel test only.
Action: Do not set this event (for test only).
ORA-08111 a partitioned index may not be coalesced as a whole
Cause: User attempted to coalesce a partitioned index using ALTER INDEX COALESCE statement, which is illegal.
Action: Coalesce the index a (sub)partition at a time (using ALTER INDEX MODIFY (sub)PARTITION COALESCE).
ORA-08112 a composite partition may not be coalesced as a whole
Cause: User attempted to coalesce a composite partition.
Action: Coalesce the index a subpartition at a time (using ALTER INDEX MODIFY SUBPARTITION COALESCE).
ORA-08113 composite partition index may not be compressed
Cause: User attempted to compress a composite partition index.
Action: Create uncompressed composite partition index.
ORA-08114 can not alter a fake index
Cause: An attempt was made to alter a fake index.
Action: Drop the fake index.
ORA-08115 can not online create/rebuild this index type
Cause: User attempted to create index type that online does not support.
Action: Use offline index create/rebuild command.
ORA-08116 can not acquire dml enough lock(S mode) for online index build
Cause: User attempted to create index online without allowing DML Share lock.
Action: Allow DML share lock on the base table.
ORA-08175 discrete transaction restriction violated (string)
Cause: An attempt was made to perform an action that is not currently supported in a discrete transaction.
Action: Roll back the transaction, and retry it as a normal transaction.
ORA-08176 consistent read failure; rollback data not available
Cause: Encountered data changed by an operation that does not generate rollback data: create index, direct load or discrete transaction.
Action: In read/write transactions, retry the intended operation. Read-only transactions must be restarted.
ORA-08177 can't serialize access for this transaction
Cause: Encountered data changed by an operation that occurred after the start of this serializable transaction.
Action: In read/write transactions, retry the intended operation or transaction.
ORA-08178 illegal SERIALIZABLE clause specified for user INTERNAL
Cause: Serializable mode is not supported for user INTERNAL.
Action: Reconnect as another user and retry the SET TRANSACTION command.
ORA-08179 concurrency check failed
Cause: Encountered data changed by an operation that occurred after a specific snapshot. This is usually used to indicate that a particular cached copy of a data block is stale. This is used for internal use for now.
Action: Refresh the cached copy of the data block and retry operation.
ORA-08200 scggc: failed to open lock
Cause: The Lock Manager failed to open a lock.
Action: Check if enough memory is available and retry the operation.
ORA-08201 scggc: failed to convert lock
Cause: The Lock Manager failed to convert a lock.
Action: Retry the operation.
ORA-08202 scgcc: failed to close lock
Cause: The Lock Manager encountered an error closing a lock.
Action: Check the Lock Manager status returned as additional information.
ORA-08203 scgcan: failed to cancel a pending convert request
Cause: The Lock Manager encountered an error cancelling a convert request.
Action: Check the Lock Manager status returned as additional information.
ORA-08204 scgcm: unexpected lock manager return code
Cause: The Lock Manager returned an unexpected value.
Action: Check the Lock Manager status returned as additional information.
ORA-08205 ora_addr: $ORACLE_SID not set in environment
Cause: The environment variable ORACLE_SID is not set.
Action: Set the ORACLE_SID environment variable.
ORA-08206 ora_addr: cannot translate address file name
Cause: Cannot translate $ORACLE_HOME/dbs/sgadef$ORACLE_SID.dbf.
Action: Ensure that ORACLE_HOME and ORACLE_SID are properly set.
ORA-08207 ora_addr: cannot open address file
Cause: The address file could not be opened.
Action: Check that Oracle is up. Check that the file $(ORACLE_HOME)/dbs/sgadef$(ORACLE_SID).dbf exists and has correct permissions.
ORA-08208 ora_addr: cannot read from address file
Cause: The address file could not be read.
Action: Check that the file $(ORACLE_HOME)/dbs/sgadef$(ORACLE_SID).dbf exists and contains a single line of text.
ORA-08209 scngrs: SCN not yet initialized
Cause: The System Commit Number has not yet been initialized.
Action: Contact Oracle Customer Support.
ORA-08210 Requested I/O error
Cause: Oracle requested that an I/O error be returned for this operation.
Action: This should not occur in normal Oracle operation. Contact support.
ORA-08230 smscre: failed to allocate SGA
Cause: The N_CORE system call failed, maybe due to insufficient memory.
Action: Specify a smaller number of buffers. Check INIT.ORA parameters.
ORA-08231 smscre: unable to attach to SGA
Cause: The process cannot attach to the SGA. This can happen if either the listener cannot attach, or the process cannot communicate with the listener.
Action: Verify that the instance is up and running. Contact Oracle Customer Support.
ORA-08232 smsdes: cannot detach from SGA
Cause: Probably the listener process has died.
Action: Contact Oracle Customer Support.
ORA-08233 smsdes: cannot unmap SGA
Cause: The N_CORE system call failed while detaching from the SGA.
Action: Note NCX error returned; contact Oracle Customer Support.
ORA-08234 smsget: cannot get instance listener address
Cause: The instance listener address cannot be read from the SGADEF file.
Action: Verify $(ORACLE_HOME) and $(ORACLE_SID) are set correctly. Additional information gives error return from ORA_ADDR.
ORA-08235 smsget: listener not on this node
Cause: A process wishing to attach to the SGA is on a different node from its instance's listener.
Action: Verify $(ORACLE_HOME) and $(ORACLE_SID) are set correctly. Contact Oracle Customer Support.
ORA-08236 smsget: cannot share subcube with listener
Cause: The N_SHARE call failed, probably because the listener has died.
Action: Check if the listener is running, and contact Oracle Customer Support.
ORA-08237 smsget: SGA region not yet created
Cause: An attempt was made to attach to an SGA which has not yet been created.
Action: Verify that the instance is running. Contact Oracle Customer Support.
ORA-08238 smsfre: cannot detach from SGA
Cause: The N_CORE system call failed while detaching from the SGA.
Action: Check NCX error, and contact Oracle Customer Support.
ORA-08240 snlmatt: parallel server name too long
Cause: The file name of the Lock Manager address file is too long.
Action: Use a shorter parallel server name.
ORA-08241 snlmatt: cannot attach to lock manager
Cause: Failed to attach to Lock Manager, perhaps because it is not running.
Action: Additional information is Lock Manager return code. Check that Lock Manager is running.
ORA-08242 snlmdet: cannot detach from lock manager
Cause: An error was encountered detaching from the Lock Manager.
Action: Additional information is Lock Manager return code. Contact Oracle Customer Support.
ORA-08260 ora_addr: cannot open nameserver
Cause: A process could not connect to the name server.
Action: Make sure the name server is up and running. Additional information gives name server's returned status.
ORA-08261 ora_addr: cannot find name in nameserver
Cause: The listener name server entry for an instance could not be found.
Action: Make sure the name server is up and running. Additional information gives name server's returned status.
ORA-08262 ora_addr: ORACLE_PSRV undefined
Cause: The parallel server name ORACLE_PSRV was undefined.
Action: Set the environment variable ORACLE_PSRV and try again.
ORA-08263 ora_addr: cannot free listener address
Cause: The listener name server entry could not be freed.
Action: Additional information gives name server's returned status. Contact Oracle Customer Support.
ORA-08264 ora_addr: cannot close nameserver
Cause: The connection to the name server could not be closed.
Action: Additional information gives name server's returned status. Contact Oracle Customer Support.
ORA-08265 create_ora_addr: cannot open nameserver
Cause: A process could not connect to the name server.
Action: Make sure the name server is up and running. Additional information gives name server's returned status.
ORA-08266 create_ora_addr: cannot register name in nameserver
Cause: The listener's addressing information could not be registered.
Action: Make sure the name server is up and running. Additional information gives name server's returned status.
ORA-08267 destroy_ora_addr: cannot close nameserver
Cause: The connection to the name server could not be closed.
Action: Additional information gives name server's returned status. Contact Oracle Customer Support.
ORA-08268 create_ora_addr: cannot close nameserver
Cause: The connection to the name server could not be closed.
Action: Additional information gives name server's returned status. Contact Oracle Customer Support.
ORA-08269 destroy_ora_addr: cannot destroy name
Cause: The listener's addressing information could not be removed.
Action: Additional information gives name server's returned status. Contact Oracle Customer Support.
ORA-08270 sksachk: Illegal archival control string
Cause: Archive files cannot be created with the given archival control string.
Action: Check that the volume exists.
ORA-08271 sksabln: Buffer size not large enough for archive control string
Cause: The given archival control string expands into too many characters.
Action: Reduce archive control string length.
ORA-08274 Out of memory for environment variable
Cause: There is insufficient memory to return the requested value.
Action: Reduce memory usage and retry.
ORA-08275 Environment variable unset
Cause: The requested environment variable is not set.
Action: Ensure that the variable name requested is correct.
ORA-08276 No room in nameserver for pid
Cause: There is no room to record the PID for a background process.
Action: SHUTDOWN ABORT and restart the database.
ORA-08277 Cannot set environment variable
Cause: There is insufficient memory to expand the environment.
Action: Reduce memory usage and retry.
ORA-08278 Cannot get CPU statistics
Cause: Could not retrieve CPU times because N_STAT failed.
Action: Contact Oracle Customer Support.
ORA-08308 sllfop: Cannot open file
Cause: Oracle could not open a file.
Action: Check the UNIX errno returned as additional information.
ORA-08309 sllfop: Cannot fstat file
Cause: Oracle could not obtain information about an open file.
Action: Check the UNIX errno returned as additional information.
ORA-08310 sllfop: Bad value for recsize
Cause: An illegal value for the record size was specified.
Action: Specify a value for the RECSIZE option that is greater than 0.
ORA-08311 sllfop: bad value for maxrecsize
Cause: An illegal value for the maximum record size was specified.
Action: Specify a value for the MAXRECSIZE option that is greater than 0.
ORA-08312 sllfop: unrecognized processing option
Cause: An unrecognized processing option was specified.
Action: Check the Oracle for nCUBE 2 User's Guide for valid options.
ORA-08313 sllfop: could not allocate buffers
Cause: Memory for the load buffers could not be allocated.
Action: Reduce the maximum record size. Eliminate any unnecessary processes on your current node before running SQL*Loader again.
ORA-08314 sllfcf: Error closing file
Cause: An error occurred trying to close a file.
Action: Check the UNIX errno returned as additional information.
ORA-08315 sllfrb: Error reading file
Cause: An error occurred trying to read from a file.
Action: Check the UNIX errno returned as additional information.
ORA-08316 sllfsk: Error seeking in file.
Cause: The LSEEK system call returned an error.
Action: Check the UNIX errno returned as additional information.
ORA-08317 sllfsk: Error seeking in file.
Cause: The LSEEK system call returned an error.
Action: Check the UNIX errno returned as additional information.
ORA-08318 sllfsk: Error reading file
Cause: An error occurred trying to read from a file.
Action: Check the UNIX errno returned as additional information.
ORA-08319 sllfsk: Error reading file
Cause: An error occurred trying to read from a file.
Action: Check the UNIX errno returned as additional information.
ORA-08320 scnget: Call to scnget before scnset or scnfnd.
Cause: This is an internal error
Action: Contact Oracle Customer Support.
ORA-08321 scnmin: NOT IMPLEMENTED YET
Cause: This is an internal error
Action: Contact Oracle Customer Support.
ORA-08322 scnmin: open/convert of bias lock failed
Cause: A call to the LKMGR failed to open and convert the bias lock.
Action: Check to make sure the LKMGR is up.
ORA-08323 scnmin: close of bias lock failed
Cause: A call to the LKMGR failed to close the bias lock.
Action: Check to make sure the LKMGR is up.
ORA-08330 Printing not supported
Cause: An attempt was made to automatically spool a file to the printer.
Action: No action required.
ORA-08331 Wait operation timed out
Cause: Oracle timed out waiting for an event.
Action: Contact Oracle Customer Support.
ORA-08332 rollback segment #string specified not available
Cause: See ORA-01545.
Action: See ORA-1545. Also, make sure you have created enough rollback segments for the number of instances you are trying to start.
ORA-08340 This command not allowed on nCUBE, only one thread is ever used.
Cause: An illegal command was executed for the nCUBE platform.
Action: There is no need to issue this command.
ORA-08341 On nCUBE, this command can only be executed from instance 1.
Cause: A command that can only be issued on instance 1 was issued elsewhere.
Action: Log on to instance 1 and repeat the command.
ORA-08342 sropen: failed to open a redo server connection
Cause: An error occurred trying to connect to the redo server.
Action: The operating system-specific error message should tell you what to do.
ORA-08343 srclose: failed to close a redo server connection
Cause: An error occurred trying to close the redo server connection.
Action: The operating system-specific error message should tell you what to do.
ORA-08344 srapp: failed to send redo data to the redo server
Cause: An error occurred trying to send redo to the redo server.
Action: The operating system-specific error message should tell you what to do.
ORA-08362 scgcm: Out of memory in lock manager.
Cause: The Lock Manager ran out of memory.
Action: Reduce the number of locks specified in the GC_FILES_TO_LOCKS and GC_ROLLBACK_LOCKS initialization parameters or increase the number of Lock Manager processes.
ORA-08401 invalid compiler name: string
Cause: An invalid compiler name comp_name was passed to a UTL_PG conversion routine.
Action: Correct the compiler name parameter in the PL/SQL code that called the conversion routine.
ORA-08412 error encountered in WMSGBSIZ, size for WMSGBLK is not big enough for warning message
Cause: The WMSGBSIZ is the maximum size for warning message block, it is recommended to be 1024 bytes to 8 kilobytes.
Action: Defined WMSGBLK of size between 1k to 8k bytes and update the WMSGBSIZ to the sizeof(WMSGBLK).
ORA-08413 invalid compiler type in FORMAT parameter at string
Cause: An invalid compiler type is defined in format control block. The format control block is invalid.
Action: Check to be sure that the format parameter was built by MAKE_RAW_TO_NUMBER_FORMAT or MAKE_NUMBER_TO_RAW_FORMAT, and that it was not accidentally overwritten or modified by the PL/SQL procedure.
ORA-08414 error encountered in string
Cause: The function routine returned an error. Where routine may be:
Action: This message will be preceded by messages providing details about the error. Check those messages to determine what action to take.
ORA-08429 raw data has invalid digit in display type data
Cause: The input raw buffer passed to a UTL_PG RAW_TO_NUMBER conversion routine contained invalid data. The picture mask parameter specified a digit, but the corresponding input from the raw data did not contain a valid digit.
Action: Either the input data is incorrect, or the picture mask is incorrect. Correct the appropriate item.
ORA-08430 raw data missing leading sign
Cause: The input raw buffer passed to a UTL_PG RAW_TO_NUMBER conversion routine had no leading sign, but the mask options parameter specified a leading sign.
Action: Correct the input raw data or the mask options so that they match.
ORA-08431 raw data missing zero as defined in picture
Cause: The picture mask parameter passed to a UTL_PG RAW_TO_NUMBER conversion routine contained a zero, but the corresponding input from the raw data was not a zero.
Action: Either the input data is incorrect, or the picture mask is incorrect. Correct the appropriate item.
ORA-08432 raw data has invalid floating point data
Cause: The input raw data passed to a UTL_PG RAW_TO_NUMBER conversion routine contained invalid floating point data.
Action: Correct the input raw data.
ORA-08433 invalid picture type in convert raw to number
Cause: The picture mask parameter passed to a UTL_PG RAW_TO_NUMBER conversion routine contained non-numeric characters, but the conversion was to a numeric data type.
Action: Correct the picture mask parameter.
ORA-08434 raw data has invalid trailing sign
Cause: The input raw buffer passed to a UTL_PG RAW_TO_NUMBER conversion routine had no trailing sign, but the mask options parameter specified a trailing sign.
Action: Correct the input raw data or the mask options so that they match.
ORA-08435 PICTURE MASK missing the leading sign when SIGN IS LEADING specified
Cause: The input MASK passed to a UTL_PG RAW_TO_NUMBER conversion routine had no leading sign, but the mask options parameter specified a leading sign.
Action: Correct the input raw data or the mask options so that they match.
ORA-08436 raw data has invalid sign digit
Cause: The input raw buffer passed to a UTL_PG RAW_TO_NUMBER conversion routine had an invalid sign digit in the position where the picture mask specified a sign.
Action: Correct the input raw data or the picture mask so that they match.
ORA-08437 invalid picture type in picture mask
Cause: The picture mask parameter passed to a UTL_PG NUMBER_TO_RAW conversion routine contained non-numeric characters, but the conversion was to a numeric data type.
Action: Correct the picture mask parameter.
ORA-08440 raw buffer is too short to hold converted data
Cause: The output raw buffer passed to a UTL_PG NUMBER_TO_RAW conversion routine was not large enough to contain the results of the conversion based on the picture mask.
Action: Increase the raw buffer size to the size necessary to hold the entire result of the conversion.
ORA-08441 closed parenthesis missing in picture mask
Cause: A closed parenthesis was missing from the picture mask passed to a UTL_PG conversion routine.
Action: Correct the picture mask.
ORA-08443 syntax error in BLANK WHEN ZERO clause in mask options
Cause: A syntax error was found in the BLANK WHEN ZERO clause in the mask options parameter passed to a UTL_PG conversion routine. Valid specifications are:
Action: Correct the mask options parameter.
ORA-08444 syntax error in JUSTIFIED clause in mask options
Cause: A syntax error was found in the JUSTIFIED clause in the mask options parameter passed to a UTL_PG conversion routine. Valid specifications are:
Action: Correct the mask options parameter.
ORA-08445 syntax error in SIGN clause in mask options
Cause: A syntax error was found in the SIGN clause in the mask options parameter passed to a UTL_PG conversion routine. Valid specifications are:
Action: Correct the mask options parameter.
ORA-08446 syntax error in SYNCHRONIZED clause in mask options
Cause: A syntax error was found in the SYNCHRONIZED clause in the mask options parameter passed to a UTL_PG conversion routine. Valid specifications are:
Action: Correct the mask options parameter.
ORA-08447 syntax error in USAGE clause in mask options
Cause: A syntax error was found in the USAGE clause in the mask options parameter passed to a UTL_PG conversion routine. Valid specifications are:
Action: Correct the mask options parameter.
ORA-08448 syntax error in DECIMAL-POINT environment clause
Cause: A syntax error was found in the DECIMAL-POINT environment clause parameter passed to a UTL_PG conversion routine. Valid specifications are: DECIMAL-POINT IS COMMA.
Action: Correct the environment clause parameter.
ORA-08449 invalid numeric symbol found in picture mask
Cause: An invalid numeric symbol was found in the picture mask parameter passed to a UTL_PG conversion routine.
Action: Correct the picture mask parameter.
ORA-08450 invalid specification of CR in picture mask
Cause: The CR suffix was incorrectly specified in the picture mask parameter passed to a UTL_PG conversion routine. The CR suffix can only appear at the end of a picture mask.
Action: Correct the picture mask parameter.
ORA-08451 invalid specification of DB in picture mask
Cause: The DB suffix was incorrectly specified in the picture mask parameter passed to a UTL_PG conversion routine. The DB suffix can only appear at the end of a picture mask.
Action: Correct the picture mask parameter.
ORA-08452 specification of E in picture mask is unsupported
Cause: The floating point exponent symbol 'E' was specified in the picture mask parameter passed to a UTL_PG conversion routine. The floating point data type is currently not supported by the UTL_PG conversion routines.
Action: Correct the picture mask parameter, and the data, if necessary.
ORA-08453 more than one V symbol specified in picture mask
Cause: The picture mask passed to a UTL_PG conversion routine contained more than one decimal point indicator ('V'). Only one decimal point indicator is allowed in the picture mask.
Action: Correct the picture mask parameter.
ORA-08454 more than one S symbol specified in picture mask
Cause: The picture mask passed to a UTL_PG conversion routine contained more than one operational sign indicator ('S'). Only one operational sign indicator is allowed in the picture mask.
Action: Correct the picture mask parameter.
ORA-08455 syntax error in CURRENCY SIGN environment clause
Cause: A syntax error was found in the CURRENCY SIGN environment clause parameter passed to a UTL_PG conversion routine. Valid specifications are: CURRENCY SIGN IS x where x is a valid currency sign.
Action: Correct the environment clause parameter.
ORA-08456 no sign in picture mask but SIGN clause in mask options
Cause: The picture mask parameter passed to a UTL_PG conversion routine contained no sign symbol ('S', '+', or '-'), but the mask options parameter contained a SIGN clause. A sign symbol is required in the picture mask parameter when the mask options parameter contains a SIGN clause.
Action: Correct the picture mask parameter or the mask options parameter.
ORA-08457 syntax error in SEPARATE CHARACTER option of SIGN clause
Cause: A syntax error was found in the SEPARATE CHARACTER option of the SIGN clause in the mask options parameter passed to a UTL_PG conversion routine. Valid specifications are: SEPARATE, SEPARATE CHARACTER.
Action: Correct the mask options parameter.
ORA-08458 invalid format parameter
Cause: The format parameter passed to a UTL_PG conversion routine was invalid. The format parameter should have been built by a prior call to either MAKE_RAW_TO_NUMBER_FORMAT or MAKE_NUMBER_TO_RAW_FORMAT.
Action: Check to be sure that the format parameter was built by MAKE_RAW_TO_NUMBER_FORMAT or MAKE_NUMBER_TO_RAW_FORMAT, and that it was not accidentally overwritten or modified by the PL/SQL procedure.
ORA-08459 invalid format parameter length
Cause: The format parameter passed to a UTL_PG conversion routine was not the correct length. Format parameters must be 2048 bytes in length.
Action: Check to be sure that the format parameter was built by MAKE_RAW_TO_NUMBER_FORMAT or MAKE_NUMBER_TO_RAW_FORMAT, and that it was not accidentally overwritten or modified by the PL/SQL procedure.
ORA-08460 invalid environment clause in environment parameter
Cause: The environment parameter passed to a UTL_PG conversion routine contained an unsupported or invalid environment clause. Only the CURRENCY SIGN and the DECIMAL-POINT IS COMMA environment clauses are supported.
Action: Correct the environment parameter.
ORA-08462 raw buffer contains invalid decimal data
Cause: The input raw buffer passed to a UTL_PG RAW_TO_NUMBER conversion routine contains invalid decimal data.
Action: Correct the input data.
ORA-08463 overflow converting decimal number to Oracle number
Cause: The output variable passed to a UTL_PG RAW_TO_NUMBER was not large enough to hold the Oracle number resulting from the input decimal number.
Action: Be sure that the input decimal number is valid, and be sure that the output variable is large enough to hold the Oracle number value.
ORA-08464 input raw decimal data contains more than 42 digits
Cause: The input raw buffer passed to a UTL_PG RAW_TO_NUMBER conversion routine contained more than 42 digits. This exceeds the maximum size of an Oracle number.
Action: Correct the raw input buffer.
ORA-08465 input mask contains more than 32 characters
Cause: The input mask passed to UTL_PG numeric conversion routine contained more the 32 characters.
Action: Correct the mask input buffer.
ORA-08466 raw buffer length string is too short for string
Cause: The input raw buffer passed to a UTL_PG RAW_TO_NUMBER conversion routine was less than string bytes long, but the picture mask parameter specified that string bytes of input data were to be converted.
Action: Either the input data is incorrect, or the picture mask is incorrect. Correct the appropriate item.
ORA-08467 error converting Oracle number to string
Cause: An error occurred when converting an Oracle number to a COBOL type of: DISPLAY COMP-3 or character variable. The Oracle number was not in the correct format.
Action: Correct the call to the conversion routine. The input must be a valid Oracle number variable.
ORA-08468 mask option string is not supported
Cause: The mask option clause was passed to a UTL_PG conversion routine, but is not supported by UTL_PG. The clause can be:
Action: Remove the clause from the mask options parameter in the PL/SQL call to UTL_PG.
ORA-08498 Warning: picture mask 'string' overrides picture mask option 'USAGE IS string' to 'USAGE IS DISPLAY'
Cause: Picture mask USAGE option was overridden by the picture mask.
Action: This is an informational message only. The message may be eliminated by changing the USAGE option to match the picture mask.
ORA-08499 Warning: picture mask options 'string' ignored by UTL_PG
Cause: Picture mask options such as OCCUR, SYNC and others are not processed by the UTL_PG numeric conversion routines.
Action: This is an informational message only. The message may be eliminated by removing the unnecessary picture mask options from the parameter list passed to the UTL_PG routine.
ORA-09200 sfccf: error creating file
Cause: Could be out of disk space.
Action: See OSD error accompanying this message.
ORA-09201 sfcopy: error copying file
Cause: Block sizes may not match.
Action: See OSD error accompanying this message.
ORA-09202 sfifi: error identifying file
Cause: DB_BLOCK_SIZE specified in the INIT.ORA file could be incorrect.
Action: See OSD error accompanying this message.
ORA-09203 sfofi: error opening file
Cause: File attributes may have changed.
Action: See OSD error accompanying this message.
ORA-09204 sfotf: error opening temporary file
Cause: Incorrect path may have been specified for the file.
Action: See OSD error accompanying this message.
ORA-09205 sfqio: error reading or writing to disk
Cause: File may have been truncated or corrupted.
Action: See OSD error accompanying this message.
ORA-09206 sfrfb: error reading from file
Cause: File may have been truncated or corrupted.
Action: See OSD error accompanying this message.
ORA-09207 sfsrd: error reading from file
Cause: File may have been truncated or corrupted.
Action: See OSD error accompanying this message.
ORA-09208 sftcls: error closing file
Cause: File may have been corrupted.
Action: See OSD error accompanying this message.
ORA-09209 sftget: error reading from file
Cause: File may have been truncated or corrupted.
Action: See OSD error accompanying this message.
ORA-09210 sftopn: error opening file
Cause: Incorrect path may have been specified for the file.
Action: See OSD error accompanying this message.
ORA-09211 sfwfb: error writing to file
Cause: File may have been truncated or corrupted.
Action: See OSD error accompanying this message.
ORA-09212 sfwfbmt: error writing to file
Cause: File may have been truncated or corrupted.
Action: See OSD error accompanying this message.
ORA-09213 slgfn: error fabricating file name
Cause: File name may be too long.
Action: See OSD error accompanying this message.
ORA-09214 sfdone: I/O error detected
Cause: File may have been truncated or corrupted.
Action: See OSD error accompanying this message.
ORA-09215 sfqio: error detected in IOCompletionRoutine
Cause: File may have been truncated or corrupted.
Action: See OSD error accompanying this message.
ORA-09216 sdnfy: bad value 'string' for parameter string
Cause: The directory specified as the value for the stated parameter could not be used.
Action: Make sure the directory you have specified is a valid directory/file specification.
ORA-09217 sfsfs: failed to resize file
Cause: Could be out of disk space.
Action: See OSD error accompanying this message.
ORA-09218 sfrfs: failed to refresh file size
Cause: File may be corrupted or truncated.
Action: See OSD error accompanying this message.
ORA-09240 smpalo: error allocating PGA memory
Cause: Could be out of memory.
Action: See OSD error accompanying this message.
ORA-09241 smsalo: error allocating SGA memory
Cause: Could be out of memory.
Action: See OSD error accompanying this message.
ORA-09242 smscre: error creating SGA
Cause: An error occurred while creating SGA.
Action: See OSD error accompanying this message.
ORA-09243 smsget: error attaching to SGA
Cause: SGA may not have been created (database not started).
Action: See OSD error accompanying this message.
ORA-09244 smprset: error setting memory protections
Cause: An error occurred while setting memory protections.
Action: See OSD error accompanying this message.
ORA-09245 smcstk: error switching stacks
Cause: An error occurred while switching stacks.
Action: See OSD error accompanying this message.
ORA-09246 sfsmap: unable to map SGA
Cause: Unable to map SGA.
Action: See OSD error accompanying this message.
ORA-09247 smsdes: error destroying the SGA
Cause: An error occurred while destroying the SGA.
Action: See OSD error accompanying this message.
ORA-09260 sigpidu: error obtaining process id
Cause: May be out of resources.
Action: See OSD error accompanying this message.
ORA-09261 spdcr: error creating detached (background) process
Cause: Could be out of resources.
Action: See OSD error accompanying this message.
ORA-09262 spdde: error terminating detached (background) process
Cause: Could be out of resources.
Action: See OSD error accompanying this message.
ORA-09263 spini: error initializing process
Cause: Could be out of memory.
Action: See OSD error accompanying this message.
ORA-09264 sptpa: error flagging process
Cause: Could be out of resources.
Action: See OSD error accompanying this message.
ORA-09265 spwat: error temporarily suspending process
Cause: Could be out of resources.
Action: See OSD error accompanying this message.
ORA-09266 spawn: error starting an Oracle process
Cause: Could be out memory.
Action: See OSD error accompanying this message.
ORA-09270 szalloc: error allocating memory for security
Cause: Could be out of memory.
Action: See OSD error accompanying this message.
ORA-09271 szlon: error verifying user name
Cause: Username may be too long.
Action: See OSD error accompanying this message.
ORA-09272 remote os logon is not allowed
Cause: Remote operating system login attempted when not allowed.
Action: See OSD error accompanying this message.
ORA-09273 szrfc: error verifying role name
Cause: An operating system error was returned when verifying the role name.
Action: See OSD error accompanying this message.
ORA-09274 szrfc: insufficient role name buffer space
Cause: An OS role name was too long.
Action: See OSD error accompanying this message.
ORA-09280 sllfcf: error closing file
Cause: File may be corrupted.
Action: See OSD error accompanying this message.
ORA-09281 sllfop: error opening file
Cause: Possibly incorrect path specified to the file.
Action: See OSD error accompanying this message.
ORA-09282 sllfrb: error reading records
Cause: File could be corrupted.
Action: See OSD error accompanying this message.
ORA-09283 sllfsk: error skipping records
Cause: File could be corrupted.
Action: See OSD error accompanying this message.
ORA-09284 sllfop: cannot allocate read buffer
Cause: MALLOC() system call returned an error. The system might have run out of heap space.
Action: Check additional information for the operating system error.
ORA-09285 sllfop: unrecognizable processing option, incorrect format
Cause: Processing option passed is of incorrect format.
Action: Consult your IUG for permissible formats.
ORA-09290 sksaalo: error allocating memory for archival
Cause: Could be out of memory.
Action: See OSD error accompanying this message.
ORA-09291 sksachk: invalid device specified for archive destination
Cause: Unable to access directory.
Action: Specify a valid device in ARCHIVE control string.
ORA-09292 sksabln: unable to build archive file name
Cause: Bad directory or format specified.
Action: Specify a valid directory in LOG_ARCHIVE_FORMAT and a valid format string in LOG_ARCHIVE_FORMAT in the INIT.ORA file.
ORA-09293 sksasmo: unable to send message to console
Cause: An error was returned while attempting to send a message to the console operator.
Action: See OSD error accompanying this message.
ORA-09300 osncon: unable to connect, DPMI not available
Cause: Unable to detect the presence of DPMI.
Action: Restart Windows and retry.
ORA-09301 osncon: local kernel only supported in standard mode
Cause: An attempt was made to connect to S: while in enhanced mode.
Action: Restart Windows in standard mode.
ORA-09310 sclgt: error freeing latch
Cause: This is an internal error.
Action: See OSD error accompanying this message.
ORA-09311 slsleep: error temporarily suspending process
Cause: May be out of resources.
Action: See OSD error accompanying this message.
ORA-09312 slspool: error spooling file to printer
Cause: Could be out of resources.
Action: See OSD error accompanying this message.
ORA-09313 slsprom: error prompting user
Cause: May be out of resources.
Action: See OSD error accompanying this message.
ORA-09314 sltln: error translating logical name
Cause: Internal buffer may have overflowed.
Action: See OSD error accompanying this message.
ORA-09315 sql2tt: two-task error translating ORACLE_EXECUTABLE
Cause: This is an internal error.
Action: See OSD error accompanying this message.
ORA-09316 szrpc: unable to verify password for role
Cause: OS roles may not be supported for this platform.
Action: See OSD error accompanying this message.
ORA-09317 szprv: insufficient privileges
Cause: The password specified is invalid.
Action: See OSD error accompanying this message.
ORA-09318 slkhst: unable to host out to operating system
Cause: There might not be enough memory for the command or hosting out may not be supported on this platform.
Action: See OSD error accompanying this message.
ORA-09319 slgtd: unable to obtain the current date and time
Cause: The system time might be set incorrectly.
Action: See OSD error accompanying this message.
ORA-09320 szrfc: unable to obtain the list of valid OS roles
Cause: OS roles may not be supported on this platform.
Action: See OSD error accompanying this message.
ORA-09321 slzdtb: unable to convert zoned decimal to binary
Cause: This is an internal error.
Action: See OSD error accompanying this message.
ORA-09322 slpdtb: unable to convert packed decimal to binary
Cause: This is an internal error.
Action: See OSD error accompanying this message.
ORA-09330 Session terminated internally by Oracle or by an Oracle DBA
Cause: A client workstation that is abnormally disconnected would cause Oracle to terminate that session after about a minute. This message also appears in the trace file if a SHUTDOWN ABORT is performed.
Action: No action required.
ORA-09331 scgcan: unable to process lk_sync_cancel return code
Cause: An invalid lock status was returned by the Lock Manager, so the locks may no longer be consistent.
Action: Use the UTLLOCK.SQL script to determine your lock status. Refer to the Oracle8i Administrator's Guide for information about the script. If this error occurs frequently, contact Oracle Customer Support.
ORA-09332 scgcc: unable to process lk_close return code
Cause: An invalid lock status was returned by the Lock Manager, so the locks may no longer be consistent.
Action: Use the UTLLOCK.SQL script to determine your lock status. Refer to the Oracle8i Administrator's Guide for information about the script. If this error occurs frequently, contact Oracle Customer Support.
ORA-09333 scggc: unable to process lk_open_convert return code
Cause: An invalid lock status was returned by the Lock Manager, so the locks may no longer be consistent.
Action: Use the UTLLOCK.SQL script to determine your lock status. Refer to the Oracle8i Administrator's Guide for information about the script. If this error occurs frequently, contact Oracle Customer Support.
ORA-09334 scggc: unable to process lk_convert return code
Cause: An invalid lock status was returned by the Lock Manager, so the locks may no longer be consistent.
Action: Use the UTLLOCK.SQL script to determine your lock status. Refer to the Oracle8i Administrator's Guide for information about the script. If this error occurs frequently, contact Oracle Customer Support.
ORA-09335 scgcm: unable to process return code in completion procedure
Cause: An invalid lock status was returned by the Lock Manager, so the locks may no longer be consistent.
Action: Use the UTLLOCK.SQL script to determine your lock status. Refer to the Oracle8i Administrator's Guide for information about the script. If this error occurs frequently, contact Oracle Customer Support.
ORA-09340 Specified ORACLE_SID is either invalid or too long
Cause: ORACLE_SID must be at the most 4 alphanumeric characters.
Action: Specify an ORACLE_SID with the correct format.
ORA-09341 scumnt: unable to mount database
Cause: Another instance is currently mounting the database.
Action: Try again later.
ORA-09342 Detached process terminated by Oracle during shutdown abort
Cause: The user performed a SHUTDOWN ABORT.
Action: No action required.
ORA-09344 spsig: error signalling thread
Cause: This function may not be implemented.
Action: No action required.
ORA-09350 Windows 32-bit Two-Task driver unable to allocate context area
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09351 Windows 32-bit Two-Task driver unable to allocate shared memory
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09352 Windows 32-bit Two-Task driver unable to spawn new ORACLE task
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09353 Windows 32-bit Two-Task driver unable to open event semaphore
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09354 Windows 32-bit Two-Task driver: ORACLE task unexpectedly died
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09360 Windows 3.1 Two-Task driver unable to allocate context area
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09361 Windows 3.1 Two-Task driver unable to lock context area
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09362 Windows 3.1 Two-Task driver unable to deallocate context area
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09363 Windows 3.1 Two-Task driver invalid context area
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09364 Windows 3.1 Two-Task driver unable to create hidden window
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09365 Windows 3.1 Two-Task driver unable to destroy hidden window
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09366 Windows 3.1 Two-Task driver unable to allocate shared memory
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09367 Windows 3.1 Two-Task driver unable to deallocate shared memory
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09368 Windows 3.1 Two-Task driver unable to spawn ORACLE
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09369 Windows 3.1 Two-Task driver bad instance handle
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09370 Windows 3.1 Two-Task driver ORACLE task timed out
Cause: See OSD error accompanying this message.
Action: See OSD error accompanying this message.
ORA-09700 sclin: maximum number of latches exceeded
Cause: Oracle wants to use more latches then available.
Action: Increase the value of the initialization parameter LATCH_PAGES or decrease the amount of shared memory you are using.
ORA-09701 scnfy: maximum number of processes exceeded
Cause: The value of the PROCESSES initialization parameter was exceeded.
Action: Decrease the PROCESSES parameter and restart.
ORA-09702 sem_acquire: cannot acquire latch semaphore
Cause: The semaphore used for accessing latches could not be seized.
Action: Send trace file to Oracle Customer Support, along with information on reproducing the error.
ORA-09703 sem_release: cannot release latch semaphore
Cause: The semaphore used for accessing latches could not be released.
Action: Send trace file to Oracle Customer Support, along with information on reproducing the error.
ORA-09704 sstascre: ftok error in creating test and set pages.
Cause: the FTOK() library call failed in SSTASTCRE().
Action: Verify that TASDEF@.DBF file exists. If it does then this is a possible system failure. Perhaps System V compatibility is not enabled.
ORA-09705 spcre: cannot initialize latch semaphore
Cause: The semaphore used for accessing latches could not be initialized.
Action: Send trace file to Oracle Customer Support, along with information on reproducing the error.
ORA-09706 slsget: get_process_stats error.
Cause: GET_PROCESS_STATS system call returned an error. Possible operating system error.
Action: Check additional information returned. Look for information in operating system reference. Contact Oracle Customer Support.
ORA-09708 soacon: failed to bind socket to port.
Cause: The bind system call failed on the socket.
Action: Check additional information for operating system error. Try connecting again.
ORA-09709 soacon: failed to accept a connection.
Cause: The accept system call failed on the socket.
Action: Check additional information for operating system error. Try connecting again.
ORA-09710 soarcv: buffer overflow.
Cause: The internal buffer is not big enough to hold the message read. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09711 orasrv: archmon already connected.
Cause: An existing connection has already been made from ARCHMON to ORASRV.
Action: Stop trying to connect.
ORA-09712 orasrv: log archiver already connected.
Cause: An existing connection has already been made from log archiver to ORASRV.
Action: Stop trying to connect.
ORA-09713 Global hardware clock failure caused instance termination.
Cause: The global hardware clock used to generate the System Change Number for Oracle has failed.
Action: Check the global hardware clock.
ORA-09714 Two Task interface: cannot obtain puname
Cause: The TXIPC driver cannot obtain the name of the PU. (Possible operating system error.)
Action: Check if the PUs are named (consistent).
ORA-09715 orasrv: cannot obtain puname
Cause: ORASRV cannot obtain the name of the PU (possible operating system error).
Action: Check if the PUs are named (consistent).
ORA-09716 kslcll: Unable to fix in-flux lamport latch.
Cause: One Oracle process died while still holding a LAMPORT latch.
Action: Exit (kill) all Oracle user processes. SHUTDOWN ABORT and restart Oracle RDBMS kernel.
ORA-09717 osnsui: maximum number of user interrupt handlers exceeded.
Cause: The internal limit on the number of user interrupt handlers has been exceeded.
Action: Reduce the number of simultaneous logons or reduce the number of user interrupt handlers.
ORA-09718 osnsui: cannot set up user interrupt handler.
Cause: MALLOC() failed to allocate space to hold user interrupt handler.
Action: Possible memory resource shortage.
ORA-09719 osncui: invalid handle.
Cause: The handle passed to OSNCUI is out of the valid range.
Action: Use a valid handle.
ORA-09740 slsget: cannot get virtual memory region statistics.
Cause: The VM_REGION system call failed to get virtual memory region statistics.
Action: Check return code in SERCERRNO. Possible operating system failure.
ORA-09741 spwat: error waiting for a post.
Cause: MSG_RECEIVE system call returned an error. This is an internal error.
Action: Check return code in SERCERRNO. Port name is returned in sercose[0].
ORA-09742 sppst: error during a post.
Cause: MSG_SEND system call returned an error. This is an internal error.
Action: Check return code in SERCERRNO. Port name is returned in sercose[0].
ORA-09743 smscre: could not attach shared memory.
Cause: The MMAP or write system call returned an error. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09744 smsget: mmap returned an error.
Cause: The MMAP system call returned an error. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09745 smscre: vm_allocate error, unable to create shared memory.
Cause: Error in system call VM_ALLOCATE. Failed to create SGA as a single shared memory segment.
Action: Check result code returned in SERCERRNO. Verify that the SGA attach address is valid.
ORA-09746 smscre: shared memory attach address incorrect.
Cause: The VM_ALLOCATE system call attached the SGA at an incorrect location.
Action: Verify that the SGA attach address is valid.
ORA-09747 pw_detachPorts: server call pws_detach failed.
Cause: The call PWS_DETACH to (Oracle helper) failed.
Action: Make sure the server is still active. Check the error code returned in SERCERRNO, and look for error messages in the server log file.
ORA-09748 pws_look_up: fork failed
Cause: The PWS_LOOK_UP call could not fork the (Oracle helper) process.
Action: Verify that there are enough system resources to support another process. The user or system process limit may have been exceeded, or the amount of free memory or swap space may be temporarily insufficient.
ORA-09749 pws_look_up: port lookup failure
Cause: The PWS_LOOK_UP could not find a port to (Oracle helper).
Action: Make sure the (Oracle helper) server has been started correctly by PWS_LOOK_UP, and that the network name server is still running.
ORA-09750 pw_attachPorts: port_rename failed.
Cause: The PORT_RENAME system call failed; possible internal error.
Action: Check return code in SERCERRNO, report to Oracle Customer Support.
ORA-09751 pw_attachPorts: server call pws_attach failed.
Cause: The call PWS_ATTACH to (Oracle helper) failed.
Action: Make sure the server is still active. Check the error code returned in SERCERRNO, and look for error messages in the server log file.
ORA-09752 pw_attachPorts: port_allocate failed.
Cause: The PORT_ALLOCATE system call failed; possible resource exhaustion.
Action: Check return code in SERCERRNO, report to Oracle Customer Support.
ORA-09753 spwat: invalid process number.
Cause: Function was passed an invalid Oracle process ID. This is an internal error.
Action: Additional information indicates the invalid process ID.
ORA-09754 sppst: invalid process number passed to sppst.
Cause: Function was passed an invalid Oracle process ID. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09755 osngpn: port allocation failure.
Cause: The PORT_ALLOCATE system call failed.
Action: Possible system resource shortage; check the error code in SERCERRNO.
ORA-09756 osnpns: no port in the name server.
Cause: OSNPNS could not find the given named port in the name server.
Action: Check the error code in SERCERRNO. Make sure the shadow process and network name server are still running.
ORA-09757 osnipn: port allocation failure.
Cause: The PORT_ALLOCATE system call failed.
Action: Possible system resource shortage; check the error code in SERCERRNO.
ORA-09758 osnipn: could not check port in name server.
Cause: The NETNAME_CHECK_IN call failed.
Action: Check the error code in SERCERRNO. Make sure the network name server is running.
ORA-09759 osnsbt: bad message received.
Cause: The MSG_RECEIVE system call failed, or received a bad message. This is an internal error.
Action: Report the error code returned in SERCERRNO.
ORA-09760 osnpui: cannot send break message
Cause: The Pipe driver could not send a break message to the Oracle shadow process break thread.
Action: Contact Oracle Customer Support.
ORA-09761 pw_destroyPorts: server call pws_stop_instance failed.
Cause: The call PWS_STOP_INSTANCE to (Oracle helper) failed.
Action: Make sure the server is still active. Check the error code returned in SERCERRNO, and look for error messages in the server log file.
ORA-09762 sNeXT_instanceName: translation error.
Cause: A failure was detected while translating the value of ORACLE_SID.
Action: Make sure ORACLE_SID is defined, and that it is of legal length.
ORA-09763 osnmpx: send/receive error exchanging Mach ports.
Cause: The Mach driver failed to exchange port information with the other side of the connection. Either MSG_SEND (sercose[0] == 1) or MSG_RECEIVE (sercose[0] == 2) failed.
Action: Check return code in SERCERRNO. Make sure both sides of the connection are still running.
ORA-09764 osnmop: access error on oracle executable
Cause: The Mach driver could not access the Oracle executable.
Action: Check the permissions on the Oracle executable and each component of the ORACLE_HOME/bin path.
ORA-09765 osnmop: fork failed
Cause: The Mach driver could not fork the Oracle shadow process.
Action: Verify that there are enough system resources to support another process. The user or system process limit may have been exceeded, or the amount of free memory or swap space may be temporarily insufficient.
ORA-09766 osnmop: buffer allocation failure.
Cause: The Mach driver failed to allocate enough virtual memory space for its I/O buffers.
Action: Decrease the value of BUFFER_SIZE parameter in the Two-Task driver host string.
ORA-09767 osnmfs: bad return code from msg_send.
Cause: The MSG_SEND system call failed while flushing the Mach driver's send buffer. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09768 osnmgetmsg: could not read a message
Cause: The MSG_RECEIVE system call returned a failure code while waiting for a message in the Mach driver. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09769 osnmbr: cannot send break message
Cause: The Mach driver could not send a break message to the Oracle shadow process break thread. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09770 pws_look_up: translation failure.
Cause: The PWS_LOOK_UP routine failed to translate the name of the (Oracle helper) executable.
Action: Make sure ORACLE_SID and ORACLE_HOME are set and correct. Additional information gives the translation error code.
ORA-09771 osnmwrtbrkmsg: bad return code from msg_send.
Cause: The MSG_SEND system call failed while sending a Mach driver break. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09772 osnpmetbrkmsg: message from host had incorrect message type
Cause: The Mach driver received a message having an unrecognizable message type. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09773 osnmgetdatmsg: message from host had incorrect message type
Cause: The Mach driver received a message having an unrecognizable message type. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09774 osnmui: cannot send break message
Cause: The Mach driver could not send a break message to the Oracle shadow process break thread. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09775 osnmrs: reset protocol error
Cause: The Mach two-task driver could not reset the connection. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09776 pws_look_up: access error on (Oracle helper) executable
Cause: The PWS_LOOK_UP call could not access the (Oracle helper) executable.
Action: Check the permissions on the (Oracle helper) executable and each component of the ORACLE_HOME/bin path.
ORA-09777 osnpbr: cannot send break message
Cause: The pipe driver could not send a break message to the Oracle shadow process break thread. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09778 snynfyport: failure allocating the notify port.
Cause: The routine failed to allocate or set the task's notify port.
Action: Possible operating system error. Contact Oracle Customer Support.
ORA-09779 snyGetPort: failure to allocate a port.
Cause: The PORT_ALLOCATE system call failed; system resources might be exhausted.
Action: Possible operating system error. Contact Oracle Customer Support.
ORA-09786 sllfop: open error, unable to open file.
Cause: Open system call returned an error.
Action: Check errno.
ORA-09787 sllfop: unrecognizable processing option, incorrect format.
Cause: Processing option passed is of incorrect format.
Action: Consult your IUG for permissible formats.
ORA-09788 sllfrb: unable to read file.
Cause: Read system call returned an error.
Action: Check errno. Verify file exists.
ORA-09789 sllfsk: unable to read file.
Cause: Read system call returned an error.
Action: Check errno. Verify file exists.
ORA-09790 sllfcf: unable to close file.
Cause: Close system call returned an error.
Action: Check errno.
ORA-09791 slembdf: translation error, unable to translate error file name.
Cause: Additional information indicates error returned from SLTLN.
Action: Check additional information.
ORA-09792 sllfop: cannot allocate read buffer.
Cause: MALLOC system call returned an error. The system might have run out of heap space.
Action: Check additional information for the operating system error.
ORA-09793 szguns: length of user name is greater than buffer.
Cause: The length of the name of the user being looked up is longer than size of the buffer provided by the calling routine. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09794 szrbuild: length of role name is greater than buffer.
Cause: The length of the name of the role being looked up is longer than size of the buffer provided by the calling routine. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09795 szrbuild: malloc of role structure failed.
Cause: The allocation of memory for an internal structure used to hold a role descriptor failed.
Action: Check the UNIX error number for a possible operating system failure.
ORA-09796 szrbuild: malloc of role name failed.
Cause: The allocation of memory for an internal buffer used to hold the name of a role failed.
Action: Check the UNIX error number for a possible operating system failure.
ORA-09797 Failed to get O/S MAC privileges.
Cause: The operating system would not allow the retrieval of this process' privileges.
Action: Check the UNIX error number for a possible operating system failure. If there is no error, contact Oracle Customer Support.
ORA-09798 Label comparison failed.
Cause: The comparison of two binary labels failed.
Action: Check the UNIX error number for a possible operating system failure. If there is no error, contact Oracle Customer Support.
ORA-09799 File label retrieval failed.
Cause: Oracle was unable to get a label attached to a file.
Action: Check the UNIX error number for a possible operating system failure. If there is no error, contact Oracle Customer Support.
ORA-09800 Process sensitivity label retrieval failed.
Cause: Oracle was unable to get the sensitivity label for a process.
Action: Check the UNIX error number for a possible operating system failure. If there is no error, contact Oracle Customer Support.
ORA-09801 Unable to get user ID from connection
Cause: Oracle was unable to retrieve the user's ID number from the SQL*Net connection.
Action: Check the UNIX error number for a possible operating system error. Also check the "additional information" field for the SQL*Net error. If there is no error, contact Oracle Customer Support.
ORA-09802 Conversion of binary label to string failed.
Cause: Oracle was unable to convert a binary label to a string.
Action: Check the UNIX error number for a possible operating system failure. If there is no error, contact Oracle Customer Support.
ORA-09803 Allocation of string buffer failed.
Cause: a buffer used to hold the name of the file for which a label was to be obtained could not be allocated.
Action: Check the UNIX error number for a possible operating system failure. If there is no error, contact Oracle Customer Support. The number of bytes that Oracle attempted to allocate is in the "Additional Information" field.
ORA-09804 Class conversion from binary to ORACLE failed.
Cause: Oracle was unable to convert a class component from binary format to Oracle format.
Action: Check the UNIX error number for a possible operating system failure. If there is no error, contact Oracle Customer Support.
ORA-09805 conversion of category number to string failed.
Cause: Oracle was unable to translate a category number to its corresponding string representation failed.
Action: Check the UNIX error number for a possible operating system failure. If there is no error, contact Oracle Customer Support. The category number is contained in the "Additional information" field.
ORA-09806 Allocation of label string buffer failed.
Cause: A temporary buffer used to hold a label could not be allocated.
Action: Check the UNIX error number for a possible operating system failure. If there is no error, contact Oracle Customer Support. The number of bytes that Oracle attempted to allocate is in the "Additional Information" field.
ORA-09807 Conversion of label from string to binary failed.
Cause: Oracle was unable to convert the string representation of a label to binary format.
Action: Re-enter a valid label.
ORA-09808 Could not obtain user clearance.
Cause: Oracle was unable to get a user's clearance level.
Action: Check the UNIX error number for a possible operating system failure. If there is no error, contact Oracle Customer Support.
ORA-09809 Unable to get user's group ID from connection
Cause: Oracle was unable to retrieve the user's group ID number from the SQL*Net connection.
Action: Check the UNIX error number for a possible operating system error. Also check the "additional information" field for the SQL*Net error. If there is no error, contact Oracle Customer Support.
ORA-09810 Unable to get process ID from connection
Cause: Oracle was unable to retrieve the user's process ID number from the SQL*Net connection.
Action: Check the UNIX error number for a possible operating system error. Also check the "additional information" field for the SQL*Net error. If there is no error, contact Oracle Customer Support.
ORA-09811 Unable to initialize package.
Cause: Oracle was unable to initialize the library used to obtain security information. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09812 Unable to get user clearance from connection
Cause: Oracle was unable to retrieve the user's operating system session clearance from the SQL*Net connection.
Action: Check the UNIX error number for a possible operating system error. Also check the "additional information" field for the SQL*Net error. If there is no error, contact Oracle Customer Support.
ORA-09813 Unable to get directory status
Cause: Oracle was unable to determine if a directory is multilevel.
Action: Check the UNIX error number for a possible operating system error. If there is no error, contact Oracle Customer Support.
ORA-09814 Unable to expand file name
Cause: Oracle was unable to expand the name of a file that resides in multilevel directory.
Action: Check the UNIX error number for a possible operating system error. If there is no error, contact Oracle Customer Support.
ORA-09815 File name buffer overflow
Cause: The buffer that Oracle uses to hold the expanded name of a too small. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09816 Unable to set effective privileges
Cause: This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09817 Write to audit file failed.
Cause: Oracle was unable to write an entry to the file used as the audit trail.
Action: Check the UNIX error number for a possible operating system error. If there is no error, contact Oracle Customer Support.
ORA-09818 Number is too large
Cause: Oracle was unable to convert a component string to a number because the number is larger than the largest possible value for an integer. The additional information field specifies the maximum.
Action: Correct the string and repeat the conversion.
ORA-09819 Number exceeds maximum legal value
Cause: the number specified for a component was greater than the maximum value allowed for that component.
Action: Change the component to a value less than the maximum and repeat the conversion. The maximum component number is contained in the "Additional information" field.
ORA-09820 Conversion of class string to numeric representation failed.
Cause: Oracle was unable to convert a class string to a number because all of the characters in the string were not numeric.
Action: Change the string to be either all numbers or all non-numeric characters and repeat the conversion.
ORA-09821 Numeric label is not valid
Cause: A label specified in Oracle numeric format was found not to be valid.
Action: Re-enter a valid label. Consult your system's encodings for valid numeric component values.
ORA-09822 Translation of audit file name failed.
Cause: Oracle was unable to translate the value of the AUDIT_TRAIL_DEST initialization parameter.
Action: Check the UNIX error number for a possible operating system error. If there is no error, contact Oracle Customer Support.
ORA-09823 device name is too long
Cause: The name of a device was too long to fit into an internal buffer. The additional information field contains the length of the device name. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09824 Unable to enable allowmacaccess privilege.
Cause: Oracle was not able to turn on ALLOWMACACCESS privilege so that it could do a label comparison.
Action: Check the UNIX error number. If it indicates that Oracle does not have the ALLOWMACACCESS privilege, add the ALLOWMACACCESS privilege to the potential privilege set of $ORACLE_HOME/bin/oracle using CHPRIV (1M). If the executable already has the ALLOWMACACCESS privilege, contact Oracle Customer Support.
ORA-09825 Unable to disable allowmacaccess privilege.
Cause: Oracle was not able to turn off the ALLOWMACACCESS privilege after doing a label comparison. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09826 SCLIN: cannot initialize atomic latch.
Cause: System call ATOMIC_OP() return error.
Action: Check additional information in the trace file.
ORA-09827 SCLGT: atomic latch return unknown error.
Cause: System call ATOMIC_OP() return unexpected error.
Action: Check additional information in the trace file.
ORA-09828 SCLFR: atomic latch return error.
Cause: System call ATOMIC_OP() return unexpected error.
Action: Check additional information in the trace file.
ORA-09829 pw_createPorts: server call pws_start_instance failed.
Cause: The call PWS_START_INSTANCE to (Oracle helper) failed; system resources might be exhausted.
Action: Make sure the server is still active. Check the error code returned in SERCERRNO, and look for error messages in the server log file.
ORA-09830 snyAddPort: failed to perform a remote procedure call.
Cause: The MSG_RPC system call returned an error. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09831 snyStartThread: failed to build the server port set.
Cause: The routine failed to build a port set on which to listen for requests. Possible operating system failure.
Action: Contact Oracle Customer Support.
ORA-09832 infoCallback: bad message format.
Cause: The routine received an incorrectly formatted request. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09833 addCallback: bad message format.
Cause: The routine received an incorrectly formatted request. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09834 snyGetPortSet: failed to collect info on a port.
Cause: The PORT_STATUS system called failed. Possible operating system error.
Action: Contact Oracle Customer Support.
ORA-09835 addCallback: callback port is already in a set.
Cause: The port to be added to the callback list is already in a port set. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09836 addCallback: could not add a port to the callback set.
Cause: The PORT_SET_ADD system called failed. Possible operating system error.
Action: Contact Oracle Customer Support.
ORA-09837 addCallback: could not add allocate a callback link.
Cause: The MALLOC library call failed to allocate space for a callback link. Possible operating system error.
Action: Contact Oracle Customer Support.
ORA-09838 removeCallback: failure removing the callback port.
Cause: The port PORT_SET_REMOVE system call failed. Possible operating system error.
Action: Contact Oracle Customer Support.
ORA-09839 removeCallback: callback port is not in the callback set.
Cause: The port to be removed to the callback list is not in the callback port set. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09840 soacon: Name translation failure.
Cause: SLTLN() could not translate the named pipe ?/dbs/mon2arch_@.
Action: Make sure that the ORACLE_HOME specified for this ORACLE_SID in oratab is correct.
ORA-09841 soacon: Name translation failure.
Cause: SLTLN() could not translate the named pipe ?/dbs/arch2mon_@.
Action: Make sure that the ORACLE_HOME specified for this ORACLE_SID in ORATAB is correct.
ORA-09842 soacon: Archmon unable to create named pipe.
Cause: MKNOD() failed to create named pipe ?/dbs/mon2arch_@.
Action: Your current operating system login may lack write permission for the ORACLE_HOME/dbs directory. Only USERIDs in the DBA group of a given instance can run ARCHMON for that ORACLE_SID. Make sure that the ORACLE_HOME directory is correct in ORATAB.
ORA-09843 soacon: Archmon unable to create named pipe.
Cause: MKNOD() failed to create named pipe ?/dbs/arch2mon_@.
Action: Your current operating system login may lack write permission for the ORACLE_HOME/dbs directory. Only USERIDs in the dba group of a given instance can run ARCHMON for that ORACLE_SID. Make sure that the ORACLE_HOME directory is correct in ORATAB.
ORA-09844 soacon: Archmon unable to open named pipe.
Cause: OPEN() failed to open named pipe ?/dbs/mon2arch_@.
Action: Only the Oracle DBA can run ARCHMON. Make sure that your current operating system login has owner or group search permission for the ORACLE_HOME/dbs directory. The maximum number of open files may have been exceeded.
ORA-09845 soacon: Archmon unable to open named pipe.
Cause: OPEN() failed to open named pipe ?/dbs/arch2mon_@.
Action: Only the Oracle DBA can run ARCHMON. Make sure that your current operating system login has owner or group search permission for the ORACLE_HOME/dbs directory. The maximum number of open files may have been exceeded.
ORA-09846 soacon: ARCH unable to open named pipe.
Cause: OPEN() failed to open named pipe ?/dbs/mon2arch_@.
Action: Make sure that the operating system USERID of the currently running database has search permission for the ORACLE_HOME/dbs directory. The maximum number of open files may have been exceeded.
ORA-09847 soacon: ARCH unable to open named pipe.
Cause: OPEN() failed to open named pipe ?/dbs/arch2mon_@.
Action: Make sure that the operating system USERID of the currently running database has search permission for the ORACLE_HOME/dbs directory. The maximum number of open files may have been exceeded.
ORA-09850 soacon: Archmon unable to lock named pipe.
Cause: FCNTL() failed to set write lock on named pipe ?/dbs/arch2mon_@.
Action: Make sure that ARCHMON is not already active on another terminal for this ORACLE_SID. Only one ARCHMON session is allowed at a time for a given instance.
ORA-09851 soacon: Archmon unable to lock named pipe.
Cause: FCNTL() failed to set read lock on named pipe ?/dbs/mon2arch_@.
Action: Make sure that ARCHMON is not already active on another terminal for this ORACLE_SID. Only one ARCHMON session is allowed at a time for a given instance.
ORA-09853 snyRemovePort: bad return code from request.
Cause: The request to remove a port from the callback set returned a failure code. Possible operating system error.
Action: Contact Oracle Customer Support.
ORA-09854 snyPortInfo: bad return code from request.
Cause: The request to collect information on a port in the callback set returned a failure code. Possible operating system error.
Action: Contact Oracle Customer Support.
ORA-09855 removeCallback: bad message format.
Cause: The routine received an incorrectly formatted request. This is an internal error.
Action: Contact Oracle Customer Support.
ORA-09856 smpalo: vm_allocate error while allocating pga.
Cause: The VM_ALLOCATE system call returned an error.
Action: Check returned error. Possibly out of system resources.
ORA-09857 smprset: vm_protect error while protecting pga.
Cause: The VM_PROTECT system call returned an error. This is an internal error.
Action: Contact Oracle Customer Support.
|
![]() Copyright © 1999 Oracle Corporation. All Rights Reserved. |
|