Skip Headers

Oracle9i Database Error Messages
Release 2 (9.2)

Part Number A96525-01
Go To Documentation Library
Home
Go To Product List
Book List
Go To Table Of Contents
Contents
Go To Index
Index

Master Index

Feedback

Go to previous page Go to next page

3
ORA-00900 to ORA-01499


ORA-00900 invalid SQL statement

Cause: The statement is not recognized as a valid SQL statement. This error can occur if the Procedural Option is not installed and a SQL statement is issued that requires this option (for example, a CREATE PROCEDURE statement). You can determine if the Procedural Option is installed by starting SQL*Plus. If the PL/SQL banner is not displayed, then the option is not installed.

Action: Correct the syntax or install the Procedural Option.


ORA-00901 invalid CREATE command

Cause: The CREATE command was not followed by a valid CREATE option.

Action: Correct the syntax.


ORA-00902 invalid datatype

Cause: The datatype entered in the CREATE or ALTER TABLE statement is not valid.

Action: Correct the syntax.


ORA-00903 invalid table name

Cause: A table or cluster name is invalid or does not exist. This message is also issued if an invalid cluster name or no cluster name is specified in an ALTER CLUSTER or DROP CLUSTER statement.

Action: Check spelling. A valid table name or cluster name must begin with a letter and may contain only alphanumeric characters and the special characters $, _, and #. The name must be less than or equal to 30 characters and cannot be a reserved word.


ORA-00904 string: invalid identifier

Cause: The column name entered is either missing or invalid.

Action: Enter a valid column name. A valid column name must begin with a letter, be less than or equal to 30 characters, and consist of only alphanumeric characters and the special characters $, _, and #. If it contains other characters, then it must be enclosed in double quotation marks. It may not be a reserved word.


ORA-00905 missing keyword

Cause: A required keyword is missing.

Action: Correct the syntax.


ORA-00906 missing left parenthesis

Cause: A required left parenthesis has been omitted. Certain commands, such as CREATE TABLE, CREATE CLUSTER, and INSERT, require a list of items enclosed in parentheses. Parentheses also are required around subqueries in WHERE clauses and in UPDATE table SET column = (SELECT...) statements.

Action: Correct the syntax, inserting a left parenthesis where required, and retry the statement.


ORA-00907 missing right parenthesis

Cause: A left parenthesis has been entered without a closing right parenthesis, or extra information was contained in the parentheses. All parentheses must be entered in pairs.

Action: Correct the syntax and retry the statement.


ORA-00908 missing NULL keyword

Cause: Either of the following: In a CREATE TABLE or ALTER TABLE statement, NOT was entered to specify that no null values are allowed in that column, but the keyword NULL was omitted. In the IS [NOT] NULL logical operator, the keyword NULL was not found. For example, the following statement generates this message:

SELECT * FROM EMP WHERE DEPTNO IS NOT; 

The keyword NULL must follow the keywords IS NOT.

Action: Correct the syntax.


ORA-00909 invalid number of arguments

Cause: An Oracle function was referenced with an incorrect number of arguments. All Oracle functions, except for SYSDATE, require at least one argument.

Action: Correct the syntax of the function by entering the required number of arguments.


ORA-00910 specified length too long for its datatype

Cause: No size was specified for a character field or the size was invalid. A maximum length must be specified for each character column. The maximum value for this length varies for each character datatype, such as CHAR or VARCHAR2.

Action: Enter a maximum length for the field.


ORA-00911 invalid character

Cause: Special characters are valid only in certain places. If special characters other than $, _, and # are used in a name and the name is not enclosed in double quotation marks ("), this message will be issued. One exception to this rule is for database names; in this case, double quotes are stripped out and ignored.

Action: Remove the invalid character from the statement or enclose the object name in double quotation marks.


ORA-00913 too many values

Cause: The SQL statement requires two sets of values equal in number. This error occurs when the second set contains more items than the first set. For example, the subquery in a WHERE or HAVING clause may return too many columns, or a VALUES or SELECT clause may return more columns than are listed in the INSERT.

Action: Check the number of items in each set and change the SQL statement to make them equal.


ORA-00914 missing ADD keyword

Cause: The keyword ADD does not precede one of the following:

  • The keyword log file in an ALTER DATABASE statement
  • A column element or table constraint in an ALTER TABLE statement
  • The keyword DATAFILE in an ALTER TABLESPACE statement

Action: Specify the keyword ADD in the ALTER statement.


ORA-00915 network access of dictionary table not currently allowed

Cause: This is an internal error message not usually issued.

Action: Contact Oracle Support Services.


ORA-00917 missing comma

Cause: A required comma has been omitted from a list of columns or values in an INSERT statement or a list of the form ((C,D),(E,F), ...).

Action: Correct the syntax.


ORA-00918 column ambiguously defined

Cause: A column name used in a join exists in more than one table and is thus referenced ambiguously. In a join, any column name that occurs in more than one of the tables must be prefixed by its table name when referenced. The column should be referenced as TABLE.COLUMN or TABLE_ALIAS.COLUMN. For example, if tables EMP and DEPT are being joined and both contain the column DEPTNO, then all references to DEPTNO should be prefixed with the table name, as in EMP.DEPTNO or E.DEPTNO.

Action: Prefix references to column names that exist in multiple tables with either the table name or a table alias and a period (.), as in the examples above.


ORA-00919 invalid function

Cause: An entry was formatted like a function call, but it is not recognizable as an Oracle function.

Action: Correct the syntax.


ORA-00920 invalid relational operator

Cause: A search condition was entered with an invalid or missing relational operator.

Action: Include a valid relational operator such as =, !=, ^=, <>, >, <, >=, <=, ALL, ANY, [NOT] BETWEEN, EXISTS, [NOT] IN, IS [NOT] NULL, or [NOT] LIKE in the condition.


ORA-00921 unexpected end of SQL command

Cause: The SQL command was not complete. Part of a valid command was entered, but at least one major component was omitted.

Action: Correct the syntax.


ORA-00922 missing or invalid option

Cause: An invalid option was specified in defining a column or storage clause. The valid option in specifying a column is NOT NULL to specify that the column cannot contain any NULL values. Only constraints may follow the datatype. Specifying a maximum length on a DATE or LONG datatype also causes this error.

Action: Correct the syntax. Remove the erroneous option or length specification from the column or storage specification.


ORA-00923 FROM keyword not found where expected

Cause: In a SELECT or REVOKE statement, the keyword FROM was either missing, misplaced, or misspelled. The keyword FROM must follow the last selected item in a SELECT statement or the privileges in a REVOKE statement.

Action: Correct the syntax. Insert the keyword FROM where appropriate. The SELECT list itself also may be in error. If quotation marks were used in an alias, check that double quotation marks enclose the alias. Also, check to see if a reserved word was used as an alias.


ORA-00924 missing BY keyword

Cause: The keyword BY was omitted in a GROUP BY, ORDER BY, or CONNECT BY clause. In a GRANT statement, the keyword IDENTIFIED must also be followed by the keyword BY.

Action: Correct the syntax. Insert the keyword BY where required and then retry the statement.


ORA-00925 missing INTO keyword

Cause: An INSERT statement has been entered without the keyword INTO.

Action: Correct the syntax. Insert the keyword INTO where required and then retry the statement.


ORA-00926 missing VALUES keyword

Cause: An INSERT statement has been entered without the keyword VALUES or SELECT. Either a VALUES clause or a SELECT subquery must follow the INSERT INTO clause.

Action: Correct the syntax. Enter either a VALUES clause or a subquery after the INSERT INTO clause.


ORA-00927 missing equal sign

Cause: An equal sign has been omitted in one of the following places:

  • In the SET clause of an UPDATE statement
  • Following "!" in a search condition to signify not equal

Action: Correct the syntax. Insert the equal sign where required and retry the statement.


ORA-00928 missing SELECT keyword

Cause: A SELECT subquery must be included in a CREATE VIEW statement.

Action: Correct the syntax. Insert the required SELECT clause after the CREATE VIEW clause and then retry the statement.


ORA-00929 missing period

Cause: This is an internal error message not usually issued.

Action: Contact Oracle Support Services.


ORA-00930 missing asterisk

Cause: This is an internal error message not usually issued.

Action: Contact Oracle Support Services.


ORA-00931 missing identifier

Cause: The specified string does not contain an identifier.

Action: Correct the string argument.


ORA-00932 inconsistent datatypes: expected string got string

Cause: One of the following:

  • An attempt was made to perform an operation on incompatible datatypes. For example, adding a character field to a date field (dates may only be added to numeric fields) or concatenating a character field with a long field.
  • An attempt was made to perform an operation on a database object (such as a table or view) that is not intended for normal use. For example, system tables cannot be modified by a user. Note that on rare occasions this error occurs because a misspelled object name matched a restricted object's name.
  • An attempt was made to use an undocumented view.

Action: If the cause is

  • different datatypes, then use consistent datatypes. For example, convert the character field to a numeric field with the TO_NUMBER function before adding it to the date field. Functions may not be used with long fields.
  • an object not intended for normal use, then do not access the restricted object.

ORA-00933 SQL command not properly ended

Cause: The SQL statement ends with an inappropriate clause. For example, an ORDER BY clause may have been included in a CREATE VIEW or INSERT statement. ORDER BY cannot be used to create an ordered view or to insert in a certain order.

Action: Correct the syntax by removing the inappropriate clauses. It may be possible to duplicate the removed clause with another SQL statement. For example, to order the rows of a view, do so when querying the view and not when creating it. This error can also occur in SQL*Forms applications if a continuation line is indented. Check for indented lines and delete these spaces.


ORA-00934 group function is not allowed here

Cause: One of the group functions, such as AVG, COUNT, MAX, MIN, SUM, STDDEV, or VARIANCE, was used in a WHERE or GROUP BY clause.

Action: Remove the group function from the WHERE or GROUP BY clause. The desired result may be achieved by including the function in a subquery or HAVING clause.


ORA-00935 group function is nested too deeply

Cause: This is an internal error message not usually issued.

Action: Contact Oracle Support Services.


ORA-00936 missing expression

Cause: A required part of a clause or expression has been omitted. For example, a SELECT statement may have been entered without a list of columns or expressions or with an incomplete expression. This message is also issued in cases where a reserved word is misused, as in SELECT TABLE.

Action: Check the statement syntax and specify the missing component.


ORA-00937 not a single-group group function

Cause: A SELECT list cannot include both a group function, such as AVG, COUNT, MAX, MIN, SUM, STDDEV, or VARIANCE, and an individual column expression, unless the individual column expression is included in a GROUP BY clause.

Action: Drop either the group function or the individual column expression from the SELECT list or add a GROUP BY clause that includes all individual column expressions listed.


ORA-00938 not enough arguments for function

Cause: The function was referenced with too few arguments.

Action: Check the function syntax and specify the required number of arguments.


ORA-00939 too many arguments for function

Cause: The function was referenced with too many arguments.

Action: Check the function syntax and specify only the required number of arguments.


ORA-00940 invalid ALTER command

Cause: An invalid ALTER option was specified.

Action: Correct the syntax.


ORA-00941 missing cluster name

Cause: The cluster name was either missing or invalid.

Action: Specify a valid cluster name. A valid cluster name must start with a letter, be less than or equal to 30 characters, and contain only alphanumeric characters or the special characters $, _, and #. It may not be a reserved word. The name must be specified immediately following the keywords CREATE CLUSTER.


ORA-00942 table or view does not exist

Cause: The table or view entered does not exist, a synonym that is not allowed here was used, or a view was referenced where a table is required. Existing user tables and views can be listed by querying the data dictionary. Certain privileges may be required to access the table. If an application returned this message, the table the application tried to access does not exist in the database, or the application does not have access to it.

Action: Check each of the following:

  • the spelling of the table or view name.
  • that a view is not specified where a table is required.
  • that an existing table or view name exists.

Contact the database administrator if the table needs to be created or if user or application privileges are required to access the table.

Also, if attempting to access a table or view in another schema, make certain the correct schema is referenced and that access to the object is granted.


ORA-00943 cluster does not exist

Cause: The current user owns no cluster by the specified name.

Action: Specify a valid cluster name following the keyword CLUSTER, then retry the statement.


ORA-00944 insufficient number of clustered columns

Cause: An attempt was made to create a table with fewer cluster columns than were specified in the CREATE CLUSTER statement. The CLUSTER clause of a CREATE TABLE statement must specify all cluster columns that were defined when the cluster was created.

Action: Specify all cluster columns in the CREATE TABLE statement, then retry it.


ORA-00945 specified clustered column does not exist

Cause: A column specified in the cluster clause of a CREATE TABLE statement is not a column in this table.

Action: Re-execute the statement, using the names of columns defined for the table.


ORA-00946 missing TO keyword

Cause: A GRANT statement was specified without the keyword TO, or an invalid form of the GRANT command was entered.

Action: Check the syntax for the GRANT command, insert the keyword TO where required, and retry the statement.


ORA-00947 not enough values

Cause: This error occurs when a SQL statement requires two sets of values equal in number, but the second set contains fewer items than the first set. This can occur in a WHERE or HAVING clause in which a nested SELECT returns too few columns as in:

WHERE (A,B) IN (SELECT C FROM ...) 

Another common cause of this error is an INSERT statement in which the VALUES or SELECT clause does not contain enough values needed for the INSERT, as in

INSERT INTO EMP(EMPNO,ENAME) VALUES('JONES') 

Action: Check the number of items in each set and change the SQL statement to make them equal.


ORA-00948 ALTER CLUSTER statement no longer supported

Cause: The ALTER CLUSTER statement has been withdrawn.

Action: To add data to a cluster from an existing table, use the following series of SQL statements:

CREATE TABLE newtable SELECT * FROM oldtable CLUSTER clustername;
DROP oldtable;
RENAME TABLE newtable oldtable; 


ORA-00949 illegal reference to remote database

Cause: This is an internal error message not usually issued.

Action: Contact Oracle Support Services.


ORA-00950 invalid DROP option

Cause: A DROP command was not followed by a valid DROP option, such as CLUSTER, DATABASE LINK, INDEX, ROLLBACK SEGMENT, SEQUENCE, SYNONYM, TABLE, TABLESPACE, or VIEW.

Action: Check the command syntax, specify a valid DROP option, then retry the statement.


ORA-00951 cluster not empty

Cause: A DROP CLUSTER statement specified a cluster that is not empty. A cluster may not be dropped if it contains any tables, unless the optional INCLUDING TABLES clause is specified. Tables may also be removed from a cluster by using the DROP TABLE command.

Action: Either specify the INCLUDING TABLES clause in the DROP CLUSTER statement or remove all tables from the cluster with the DROP TABLE command before issuing the DROP CLUSTER command.


ORA-00952 missing GROUP keyword

Cause: Groups are not currently implemented.

Action: No user action required.


ORA-00953 missing or invalid index name

Cause: In a CREATE INDEX, DROP INDEX, or VALIDATE INDEX statement, the index name was missing or invalid.

Action: Specify a valid index name after the keyword INDEX. To drop or validate an existing index, check the name by querying the data dictionary. To create a new index, check the syntax before retrying.


ORA-00954 missing IDENTIFIED keyword

Cause: A GRANT CONNECT statement was issued without the keyword IDENTIFIED.

Action: Check the syntax and insert the keyword IDENTIFIED after the last username. The format is

GRANT CONNECT TO user-list IDENTIFIED BY password-list; 


ORA-00955 name is already used by an existing object

Cause: An attempt was made to create a database object (such as a table, view, cluster, index, or synonym) that already exists. A user's database objects must have distinct names.

Action: Enter a unique name for the database object or modify or drop the existing object so it can be reused.


ORA-00956 missing or invalid auditing option

Cause: An AUDIT or NOAUDIT command was not followed by a valid option or the keyword ALL. For example, when AUDITing tables an option such as ALTER, AUDIT, COMMENT, DELETE, GRANT, INDEX, INSERT, LOCK, RENAME, SELECT, or UPDATE must be specified.

Action: Correct the syntax.


ORA-00957 duplicate column name

Cause: A column name was specified twice in a CREATE or INSERT statement. Column names must be unique within a table, view, or cluster.

Action: In a CREATE statement, change one of the column names to a new, unique column name. In an INSERT statement, remove one of the duplicate names.


ORA-00958 missing CHECK keyword

Cause: The keyword CHECK should follow the keyword WITH in the WITH OPTION clause of the CREATE VIEW statement.

Action: Check the statement syntax and insert the keyword CHECK where required. Then retry the statement.


ORA-00959 tablespace 'string' does not exist

Cause: A statement specified the name of a tablespace that does not exist.

Action: Enter the name of an existing tablespace. For a list of tablespace names, query the data dictionary.


ORA-00960 ambiguous column naming in select list

Cause: A column name in the order-by list matches more than one select list columns.

Action: Remove duplicate column naming in select list.


ORA-00961 bad datetime/interval value

ORA-00962 too many group-by / order-by expressions

Cause: The group-by or order-by column list contain more than 1000 expressions.

Action: Use no more than 1000 expressions in the group-by or order-by list.


ORA-00963 unsupported interval type

Cause: An unsupported interval type was encountered.

Action: Use a valid interval type.


ORA-00964 table name not in FROM list

Cause: A table specified in a query's SELECT list is not named in the FROM clause list.

Action: Check spelling of the table names, check that each table name in the SELECT list matches a table name in the FROM list, and then retry the statement.


ORA-00965 column aliases not allowed for '*'

Cause: An alias was used with the return-all-columns function (*) in the SELECT list. For example:

SELECT * COL_ALIAS FROM EMP; 

Action: Either specify individual columns or do not specify an alias with a "*".


ORA-00966 missing TABLE keyword

Cause: A LOCK statement was specified and the keyword TABLE was missing, misspelled, or misplaced. A LOCK statement must begin with LOCK TABLE tablename.

Action: Correct the syntax.


ORA-00967 missing WHERE keyword

Cause: The keyword WHERE in a SELECT statement was missing, misspelled, or misplaced.

Action: Correct the syntax.


ORA-00968 missing INDEX keyword

Cause: The keyword INDEX in a CREATE UNIQUE INDEX or VALIDATE INDEX statement was missing, misspelled, or misplaced.

Action: Correct the syntax.


ORA-00969 missing ON keyword

Cause: The keyword ON in a GRANT, REVOKE, or CREATE INDEX statement was missing, misspelled, or misplaced.

Action: Check syntax and spelling, and use the keyword ON where required.


ORA-00970 missing WITH keyword

Cause: The keyword START was specified without the keyword WITH. Both keywords are necessary if a START WITH clause is desired in a tree-structured query.

Action: Change the keyword START to the keywords START WITH. Then retry the statement.


ORA-00971 missing SET keyword

Cause: The keyword SET in an UPDATE statement is missing, misspelled, or misplaced.

Action: Check syntax and spelling, and use the keyword SET after the name of the table to be updated.


ORA-00972 identifier is too long

Cause: The name of a schema object exceeds 30 characters. Schema objects are tables, clusters, views, indexes, synonyms, tablespaces, and usernames.

Action: Shorten the name to 30 characters or less.


ORA-00973 invalid row count estimate

ORA-00974 invalid PCTFREE value (percentage)

Cause: The percentage of free space specified in a CREATE INDEX statement is not between 0 and 100. A PCTFREE value of 0 means the entire block is available. The value 100 is not useful because it means that no data may be inserted. The default is 10.

Action: Specify a PCTFREE value between 0 and 100. Then retry the statement.


ORA-00975 date + date not allowed

Cause: An attempt was made to add two date fields together. Dates may be added only to numeric fields, not to other dates.

Action: Use the Oracle function TO_NUMBER to convert one of the date fields to a numeric field before adding it to the other date field.


ORA-00976 LEVEL, PRIOR, or ROWNUM not allowed here

Cause: The use of the PRIOR clause, the pseudo-column LEVEL, or ROWNUM is incorrect in this context.

Action: Check the syntax for the SQL statement. Then remove or relocate the keyword PRIOR, LEVEL, or ROWNUM.


ORA-00977 duplicate auditing option

Cause: An AUDIT or NOAUDIT statement specified the same option more than once.

Action: Either specify ALL without other auditing options or remove the duplicate auditing specifications.


ORA-00978 nested group function without GROUP BY

Cause: A group function, such as AVG, COUNT, MAX, MIN, SUM, STDDEV, or VARIANCE, was used within another group function, as in MAX(COUNT(*)), without a corresponding GROUP BY clause.

Action: Either add a GROUP BY clause or remove the extra level of nesting.


ORA-00979 not a GROUP BY expression

Cause: The GROUP BY clause does not contain all the expressions in the SELECT clause. SELECT expressions that are not included in a group function, such as AVG, COUNT, MAX, MIN, SUM, STDDEV, or VARIANCE, must be listed in the GROUP BY clause.

Action: Include in the GROUP BY clause all SELECT expressions that are not group function arguments.


ORA-00980 synonym translation is no longer valid

Cause: The synonym used is based on a table, view, or synonym that no longer exists.

Action: Replace the synonym with the name of the object it references or re-create the synonym so that it refers to a valid table, view, or synonym.


ORA-00981 cannot mix table and system auditing options

Cause: Both table-wide and system-wide options were specified within a single AUDIT statement.

Action: Check the AUDIT command syntax. Then retry one or more AUDIT statements.


ORA-00982 missing plus sign

Cause: A left parenthesis appeared in a join condition, but a plus sign (+) did not follow. A left parenthesis in a join condition usually signals an outer-join specification and so a plus sign is expected to follow. To specify an outer join on a column in a join operation, follow the column reference in the join condition with a plus sign (+) enclosed in parentheses.

Action: Correct the SQL syntax and retry the statement.


ORA-00984 column not allowed here

Cause: A column name was used in an expression where it is not permitted, such as in the VALUES clause of an INSERT statement.

Action: Check the syntax of the statement and use column names only where appropriate.


ORA-00985 invalid program name

Cause: Probably a syntax error.

Action: Correct syntax.


ORA-00986 missing or invalid group name(s)

Cause: Probably a syntax error.

Action: Correct syntax.


ORA-00987 missing or invalid username(s)

Cause: No username was specified in a GRANT statement or one of the specified usernames is invalid. Valid usernames must be specified following the keyword TO in a GRANT statement to define a user. A username must begin with a letter, consist only of alphanumeric characters and the special characters $, _, and #, and be less than or equal to 30 characters. If it contains other characters, it must be enclosed in double quotation marks. It may not be a reserved word.

Action: Specify a valid username, or list of usernames, following the keyword TO in the GRANT statement.


ORA-00988 missing or invalid password(s)

Cause: More usernames than passwords were specified in a GRANT statement. A valid password must be specified for each username listed in the GRANT statement.

Action: Enter a valid password for each username.


ORA-00989 too many passwords for usernames given

Cause: More passwords than usernames were specified in a GRANT statement. Only one password may be entered for each username listed in the GRANT statement.

Action: Enter an equal number of usernames and passwords.


ORA-00990 missing or invalid privilege

Cause: No privileges were specified in a GRANT privilege statement, or one of the specified privileges is invalid.

Action: Enter one or more valid privileges such as SELECT, INSERT, DELETE, UPDATE, ALTER, INDEX, REFERENCES, or ALL. More than one privilege may be granted by entering the privileges in a list separated by commas (,) or by specifying the keyword ALL to grant all privileges.


ORA-00991 only MAC privileges may be granted to procedures

Cause: Object privileges or non-MAC system privileges were granted to the procedure.

Action: Only grant MAC privileges using the PROCEDURE clause.


ORA-00992 invalid format for REVOKE command

Cause: An invalid form of the REVOKE command was entered. There are two forms of the REVOKE command. The first form is used to revoke a user's database access privileges. The second form is used to revoke a user's object privileges.

Action: Check the command syntax and retry the statement.


ORA-00993 missing GRANT keyword

Cause: The keyword WITH was specified at the end of a GRANT statement without the keyword GRANT. To grant privileges to a user and the permission to grant those privileges to another user, you must specify the keywords WITH GRANT OPTION at the end of the GRANT statement.

Action: Change the keyword WITH to the keywords WITH GRANT OPTION, then retry the statement.


ORA-00994 missing OPTION keyword

Cause: The keywords WITH GRANT were specified at the end of a GRANT statement without the keyword OPTION.

Action: Change the keywords WITH GRANT to the keywords WITH GRANT OPTION. Then retry the statement.


ORA-00995 missing or invalid synonym identifier

Cause: In a CREATE or DROP SYNONYM statement, the synonym name was either missing or invalid.

Action: Check syntax and spelling. A valid synonym name must be specified immediately following the keyword SYNONYM in both statements. Valid synonym names must begin with a letter, consist of alphanumeric characters and the special characters $, _, and #, and be less than or equal to 30 characters. They may not be reserved words.


ORA-00996 the concatenate operator is ||, not |

Cause: A single bar (|) was interpreted as an attempt to specify concatenation, but the concatenation operator is a double bar (||).

Action: Enter a double bar (||) for concatenation or remove the single bar (|) if concatenation was not intended.


ORA-00997 illegal use of LONG datatype

Cause: A value of datatype LONG was used in a function or in a DISTINCT, WHERE, CONNECT BY, GROUP BY, or ORDER BY clause. A LONG value can only be used in a SELECT clause.

Action: Remove the LONG value from the function or clause.


ORA-00998 must name this expression with a column alias

Cause: An expression or function was used in a CREATE VIEW statement, but no corresponding column name was specified. When expressions or functions are used in a view, all column names for the view must be explicitly specified in the CREATE VIEW statement.

Action: Enter a column name for each column in the view in parentheses after the view name.


ORA-00999 invalid view name

Cause: In a CREATE VIEW statement, the view name was missing or invalid.

Action: Enter a valid view name following CREATE VIEW. Valid view names must begin with a letter, consist of only alphanumeric characters and the special characters $, _, and #, be less than or equal to 30 characters, and may not be reserved words. If the view name contains other characters, it must be enclosed in double quotation marks.


ORA-01000 maximum open cursors exceeded

Cause: A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.

Action: Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.


ORA-01001 invalid cursor

Cause: Either a host language program call specified an invalid cursor or the value of the MAXOPENCURSORS option in the precompiler command were too small. All cursors must be opened using the OOPEN call before being referenced in any of the following calls: SQL, DESCRIBE, NAME, DEFINE, BIND, EXEC, FETCH, and CLOSE. The Logon Data Area (LDA) must be defined by using OLON or OLOGON. If the LDA is not defined, this message is issued for the following calls: OPEN, COM, CON, ROL, and LOGOFF.

Action: Check the erroneous call statement. Specify a correct LDA area or open the cursor as required. If there is no problem with the cursor, it may be necessary to increase the MAXOPENCURSORS option value before precompiling.


ORA-01002 fetch out of sequence

Cause: In a host language program, a FETCH call was issued out of sequence. A successful parse-and-execute call must be issued before a fetch. This can occur if an attempt was made to FETCH from an active set after all records have been fetched. This may be caused by fetching from a SELECT FOR UPDATE cursor after a commit. A PL/SQL cursor loop implicitly does fetches and may also cause this error.

Action: Parse and execute a SQL statement before attempting to fetch the data.


ORA-01003 no statement parsed

Cause: A host language program call referenced a cursor with no associated parsed SQL statement. A SQL call (for example, OSQL3) must be used to pass a SQL statement to Oracle and to associate the statement with an open cursor. A cursor must already have an associated SQL statement if referenced in any of the following calls: DESCRIBE, NAME, DEFINE, BIND, EXECUTE, and FETCH.

Action: Do the SQL call, for example, OSQL, to pass the required SQL statement before referencing the cursor.


ORA-01004 default username feature not supported; logon denied

Cause: An attempt was made to use automatic logon on a system not supporting this feature.

Action: Provide the complete username and password to log on to Oracle.


ORA-01005 null password given; logon denied

Cause: An invalid password was given when logging on.

Action: Provide a valid password.


ORA-01006 bind variable does not exist

Cause: A program issued a BIND call for a variable not listed in the associated SQL statement. Only those variables prefixed by either a colon (:) or ampersand (&) in the SQL statement may be referenced in a BIND call, OBIND or OBINDN. This error may also be caused by a mismatch between a Precompiler program and the related library, SQLLIB.

Action: Modify the BIND call to reference one of the substitute variables specified in the associated SQL statement.


ORA-01007 variable not in select list

Cause: A reference was made to a variable not listed in the SELECT clause. In OCI, this can occur if the number passed for the position parameter is less than one or greater than the number of variables in the SELECT clause in any of the following calls: DESCRIBE, NAME, or DEFINE. In SQL*Forms or SQL*Report, specifying more variables in an INTO clause than in the SELECT clause also causes this error.

Action: Determine which of the problems listed caused the problem and take appropriate action.


ORA-01008 not all variables bound

Cause: A SQL statement containing substitution variables was executed without all variables bound. All substitution variables must have a substituted value before the SQL statement is executed.

Action: In OCI, use an OBIND or OBINDN call to substitute the required values.


ORA-01009 missing mandatory parameter

Cause: A host language program call did not pass all required parameters.

Action: Check the syntax for the call and enter all required parameters.


ORA-01010 invalid OCI operation

Cause: One of the following:

  • You attempted an invalid OCI operation.
  • You are using an Oracle client application linked with release 7.1 (or higher) libraries, the environment variable ORA_ENCRYPT_LOGIN is set to TRUE, and you attempted to connect to a release 7.0 (or lower) Oracle database server.
  • You are connected to a release 7.1 (or higher) Oracle database server, the DBLINK_ENCRYPT_LOGIN initialization parameter is set to TRUE, and you attempted to use a database link pointing to a release 7.0 (or lower) Oracle database server.
  • You are connected to a release 9.0.2(or higher) Oracle database server and you attempted to use a database link pointing to a release 9.0.1 (or lower) Oracle database server for distributed autonomous transactions.

Action: For the above causes:

  • Do not use the invalid OCI operation.
  • If you do not wish to use encrypted connect passwords in your distributed database, then set ORA_ENCRYPT_LOGIN to FALSE. If you wish to use encrypted connect passwords, then you must upgrade all Oracle database servers to release 7.1 (or higher).
  • If you do not wish to use encrypted database links in your distributed database, then set DBLINK_ENCRYPT_LOGIN to FALSE. If you wish to use encrypted database links, then you must upgrade all Oracle database servers to release 7.1 (or higher).
  • Do not attempt distributed autonomous transactions on release 9.0.1 (or lower) Oracle database servers.

ORA-01011 cannot use v7 compatibility mode when talking to v6 server

Cause: An attempt was made to use Oracle7 compatibility mode when accessing Oracle version 6.

Action: Use V6 SQL language type. You may need to use the SET COMPATIBILITY V6 command.


ORA-01012 not logged on

Cause: A host language program issued an Oracle call, other than OLON or OLOGON, without being logged on to Oracle. This can occur when a user process attempts to access the database after the instance it is connected to terminates, forcing the process to disconnect.

Action: Log on to Oracle, by calling OLON or OLOGON, before issuing any Oracle calls. When the instance has been restarted, retry the action.


ORA-01013 user requested cancel of current operation

Cause: The user interrupted an Oracle operation by entering CTRL-C, Control-C, or another canceling operation. This forces the current operation to end. This is an informational message only.

Action: Continue with the next operation.


ORA-01014 ORACLE shutdown in progress

Cause: A user tried to log on to Oracle while an instance shutdown was in progress. Oracle logons are disabled while Oracle is being shut down.

Action: Wait until Oracle is brought back up before attempting to log on.


ORA-01015 logon called recursively

Cause: This is an internal error message not usually issued.

Action: Contact Oracle Support Services.


ORA-01016 This function can be called only after a fetch

Cause: The cursor is in an invalid state.

Action: Ensure the appropriate OCI/UPI function is called after the fetch and before the offending function.


ORA-01017 invalid username/password; logon denied

Cause: An invalid username or password was entered in an attempt to log on to Oracle. The username and password must be the same as was specified in a GRANT CONNECT statement. If the username and password are entered together, the format is: username/password.

Action: Enter a valid username and password combination in the correct format.


ORA-01018 column does not have a LONG datatype

Cause: An attempt was made to fetch data using the LONG fetch option, but the specified column was not LONG.

Action: Re-execute the fetch without the LONG fetch option or create the table with a LONG column.


ORA-01019 unable to allocate memory in the user side

Cause: The user side memory allocator returned an error.

Action: Increase the size of the process heap or switch to the old set of calls.


ORA-01020 unknown context state

Cause: This is an internal error message not usually issued.

Action: Contact Oracle Support Services.


ORA-01021 invalid context size specified

Cause: This is an internal error message not usually issued.

Action: Contact Oracle Support Services.


ORA-01022 database operation not supported in this configuration

Cause: The attempted database operation does not conform to the user programming interface (UPI) for the two communicating Oracle servers.

Action: You may need to upgrade one or more of your Oracle servers or re-link your user side application with new libraries. Report the problem to Oracle Support Services.


ORA-01023 Cursor context not found (Invalid cursor number)

Cause: The cursor number is not a valid open cursor.

Action: Make sure that the cursor is open.


ORA-01024 invalid datatype in OCI call

Cause: An OCI program call specified an invalid datatype. In OCI calls, Oracle datatypes are specified as numbers between 1 and 7.

Action: Check the datatype description and enter the correct number for the datatype.


ORA-01025 UPI parameter out of range

Cause: An integer parameter to a UPI function is out of range.

Action: This usually indicates an error in a tool built on top of the Oracle DBMS. Report the error to Oracle Support Services.


ORA-01026 multiple buffers of size > 4000 in the bind list

Cause: More than one long buffer in the bind list.

Action: Change the buffer size to be less than 4000 for the bind variable bound to a normal column.


ORA-01027 bind variables not allowed for data definition operations

Cause: An attempt was made to use a bind variable in a SQL data definition operation.

Action: Such bind variables are not allowed.


ORA-01028 internal two task error

Cause: Received send long message but do not have the cursor context.

Action: Contact Oracle Support Services.


ORA-01029 internal two task error

Cause: Received a request to send the long again when there is no long

Action: Contact Oracle Support Services.


ORA-01030 SELECT ... INTO variable does not exist

Cause: The SELECT... INTO specified in the bind call does not correspond to a variable in the SQL statement.

Action: If it is not possible to correct the statement, then contact Oracle Support Services.


ORA-01031 insufficient privileges

Cause: An attempt was made to change the current username or password without the appropriate privilege. This error also occurs if attempting to install a database without the necessary operating system privileges.

Action: Ask the database administrator to perform the operation or grant the required privileges.


ORA-01032 no such userid

Cause: This is an internal error message related to Export/Import.

Action: Contact Oracle Support Services.


ORA-01033 ORACLE initialization or shutdown in progress

Cause: An attempt was made to log on while Oracle is being started or shut down.

Action: Wait a few minutes. Then retry the operation.


ORA-01034 ORACLE not available

Cause: Oracle was not started. Possible causes include the following:

  • The SGA requires more space than was allocated for it.
  • The operating-system variable pointing to the instance is improperly defined.

Action: Refer to accompanying messages for possible causes and correct the problem mentioned in the other messages. If Oracle has been initialized, then on some operating systems, verify that Oracle was linked correctly. See the platform-specific Oracle documentation.


ORA-01035 ORACLE only available to users with RESTRICTED SESSION privilege

Cause: Logins are disallowed because an instance started in restricted mode. Only users with RESTRICTED SESSION system privilege can log on.

Action: Request that Oracle be restarted without the restricted option or obtain the RESTRICTED SESSION system privilege.


ORA-01036 illegal variable name/number

Cause: Unable to find bind context on user side.

Action: Make sure that the variable being bound is in the SQL statement.


ORA-01037 maximum cursor memory exceeded

Cause: An attempt was made to process a complex SQL statement which consumed all available memory of the cursor.

Action: Simplify the complex SQL statement. Alternatively, you can use the NO_EXPAND hint which prevents the cost-based optimizer from considering OR-expansion for queries having OR conditions or INLISTS in the WHERE clause. Usually, the optimizer considers using OR expansion and uses this method if it decides the cost is lower than not using it. Refer to the Oracle9i Database Performance Tuning Guide and Reference for information about using hints.


ORA-01038 cannot write database file version string with ORACLE version string

Cause: An attempt was made to write datafile headers in an old format. The new format cannot be used until after the database has been verified as being compatible with this software version.

Action: Open the database to advance to the new file formats, then repeat the operation. If the operation is required before the database can be opened, then use the previous software release to do the operation.


ORA-01039 insufficient privileges on underlying objects of the view

Cause: An attempt was made to explain plan on other people's view without the necessary privileges on the underlying objects of the view.

Action: Get necessary privileges or do not perform the offending operation.


ORA-01040 invalid character in password; logon denied

Cause: There are multibyte characters in the password or some characters in the password are not in US7ASCII range.

Action: Resubmit the password with valid characters.


ORA-01041 internal error. hostdef extension doesn't exist

Cause: Pointer to HSTDEF extension in HSTDEF is null.

Action: Contact Oracle Support Services.


ORA-01042 detaching a session with open cursors not allowed

Cause: An attempt was made to detach a session which had open cursors.

Action: Close all the cursors before detaching the session.


ORA-01043 user side memory corruption [string], [string], [string], [string]

Cause: The application code corrupted some of the user memory used by Oracle.

Action: Make sure that the application code is not overwriting memory.


ORA-01044 size string of buffer bound to variable exceeds maximum string

Cause: An attempt was made to bind a buffer whose total size would exceed the maximum size allowed. Total array size for arrays is calculated as:

(element_size)*(number of elements)

Action: Reduce the buffer size.


ORA-01045 user string lacks CREATE SESSION privilege; logon denied

Cause: A connect was attempted to a userid which does not have create session privilege.

Action: Grant the user CREATE SESSION privilege.


ORA-01046 cannot acquire space to extend context area

Cause: Oracle could not extend the current area any further because the operating system would not supply any more space. A system-specific message should appear following this message.

Action: Close some cursors and try again or check operating system quotas to use more virtual memory. See your operating system-specific Oracle documentation.


ORA-01047 The above error occurred in schema=string, package=string, procedure=string

Cause: This message is displayed after a previous message to provide more specific information.

Action: See the cause and action for the previous message.


ORA-01048 Couldn't find the specified procedure in the given context

Cause: The procedure user specified in deferred RPC does not exist.

Action: Check to make sure that the procedure exists and is visible to the replication process.


ORA-01049 Bind by name is not supportted in streamed RPC

Cause: This error occurs when a newer server version requests from an older server version an operation that is not supported.

Action: You may need to upgrade one or more of your Oracle servers or relink your user application with new libraries.


ORA-01050 cannot acquire space to open context area

Cause: Oracle could not open a new context area because the operating system would not supply any more space. A system-specific message should appear following this message.

Action: Close some cursors and try again or check operating system quotas to use more virtual memory. See your operating system-specific Oracle documentation.


ORA-01051 deferred rpc buffer format invalid

Cause: The deferred RPC data in SYS.DEF$_CALL is corrupted.

Action: Contact Oracle Support Services.


ORA-01052 required destination LOG_ARCHIVE_DUPLEX_DEST is not specified

Cause: A valid destination for parameter LOG_ARCHIVE_DUPLEX_DEST was not specified when parameter LOG_ARCHIVE_MIN_SUCCEED_DEST was set to 2.

Action: Either specify a value for parameter LOG_ARCHIVE_DUPLEX_DEST, or reduce the value for parameter LOG_ARCHIVE_MIN_SUCCEED_DEST to 1.


ORA-01053 user storage address cannot be read

Cause: A bind variable or other user area could not be read by Oracle.

Action: Check that binds are done correctly on valid user buffers, then retry the operation.


ORA-01054 user storage address cannot be written

Cause: A define, FETCH... INTO or SELECT... INTO, variable or other user area could not be written to by Oracle.

Action: Check that INTO variables and indicators are correctly specified. Then retry the operation.


ORA-01057 invalid or ambiguous block.field reference in user exit

Cause: The reference to a block.field identifier in a user exit is incorrect or ambiguous, probably because it is misspelled or incomplete.

Action: Check syntax and identifier spelling. Then correct the reference.


ORA-01058 internal New Upi interface error

Cause: Attempt to delete non-existent HSTDEF extension.

Action: Contact Oracle Support Services.


ORA-01059 parse expected before a bind or execute

Cause: The client application attempted to bind a variable or execute a cursor opened in a PL/SQL block before the statement was parsed.

Action: Ensure the statement is parsed before a bind or execute.


ORA-01060 array binds or executes not allowed

Cause: The client application attempted to bind an array of cursors or attempted to repeatedly execute against a PL/SQL block with a bind variable of type cursor.

Action: Bind a single cursor or execute the PL/SQL block once.


ORA-01061 cannot start up a V8 server using a V7 client application

Cause: You are using an Oracle client application linked with version 7 (or lower) libraries and you attempted to start up a V8 (or higher) server.

Action: Use a client application linked with V8 (or higher) libraries.


ORA-01062 unable to allocate memory for define buffer

Cause: Exceeded the maximum buffer size for current platform.

Action: Use piecewise fetch with a smaller buffer size.


ORA-01070 Using an old version of Oracle for the server

Cause: An attempt was made to run an older, obsolete Oracle Server.

Action: Upgrade the server.


ORA-01071 cannot perform operation without starting up ORACLE

Cause: An attempt was made to perform an operation before Oracle was started.

Action: Start Oracle. Then retry the operation.


ORA-01072 cannot stop ORACLE; ORACLE not running

Cause: An attempt was made to stop Oracle, but Oracle was not running.

Action: No action required.


ORA-01073 fatal connection error: unrecognized call type

Cause: An illegal internal operation was attempted.

Action: Contact Oracle Support Services.


ORA-01074 cannot shut down ORACLE; inside a login session - log off first

Cause: An attempt was made to shut down Oracle inside a logon session.

Action: Log off before shutting down Oracle.


ORA-01075 you are currently logged on

Cause: An attempt was made to log on while already logged on.

Action: No action required.


ORA-01076 multiple logons per process not yet supported

Cause: Oracle does not support multiple logons per process.

Action: No action required.


ORA-01077 background process initialization failure

Cause: A failure occurred during initialization of the background processes.

Action: Refer to the diagnostic information in the accompanying message stack or in the trace file and take appropriate action.


ORA-01078 failure in processing system parameters

Cause: Failure during processing of initialization parameters during system startup.

Action: Further diagnostic information should be in the error stack.


ORA-01079 ORACLE database was not properly created, operation aborted

Cause: There was an error when the database or control file was created.

Action: Check what error was signaled when the database was first created or when the control file was re-created. Take appropriate actions to re-create the database or a new control file.


ORA-01080 error in shutting down ORACLE

Cause: A failure occurred during system shutdown.

Action: Refer to the diagnostic information in the accompanying message stack and take appropriate action.


ORA-01081 cannot start already-running ORACLE - shut it down first

Cause: An attempt was made to start Oracle while it was already running.

Action: Shut down Oracle first, if you want to restart it.


ORA-01082 'row_locking = always' requires the transaction processing option

Cause: "row_locking = always" is specified in the INIT.ORA file. This feature is not supported by ORACLE without the transaction processing option.

Action: Remove it from INIT.ORA file or set it to "default" or "intent".


ORA-01083 value of parameter "string" is inconsistent with that of other instances

Cause: The value of the given initialization parameter is required to be the same for all instances in the cluster database configuration.

Action: Change the value of the initialization parameter in the initialization parameter file to match that of other cluster database instances.


ORA-01084 invalid argument in OCI call

Cause: The failing OCI call contains an argument with an invalid value.

Action: Use valid argument values. For more information, see the Oracle Call Interface Programmer's Guide and the appropriate programming language supplement.


ORA-01085 preceding errors in deferred rpc to "string.string.string"

Cause: Errors were encountered when the named procedure was executed as a deferred remote procedure call.

Action: Correct the cause of the preceding errors.


ORA-01086 savepoint 'string' never established

Cause: An attempt was made to roll back to a savepoint that was never established.

Action: No action is required.


ORA-01087 cannot start up ORACLE - currently logged on

Cause: An attempt was made to start up Oracle by a user who is currently logged on.

Action: Log off. Then issue the STARTUP command.


ORA-01088 cannot shut down ORACLE while active processes exist

Cause: Users are still logged into the instance.

Action: Either wait for all users to logoff or use SHUTDOWN IMMEDIATE.


ORA-01089 immediate shutdown in progress - no operations are permitted

Cause: The SHUTDOWN IMMEDIATE command was used to shut down a running Oracle instance, terminating any active operations.

Action: Wait for the instance to be restarted or contact the database administrator.


ORA-01090 shutdown in progress - connection is not permitted

Cause: The SHUTDOWN command was used to shut down a running Oracle instance, disallowing any connects to Oracle.

Action: Wait for the instance to restart or contact the database administrator.


ORA-01091 failure during startup force

Cause: Unable to destroy the old SGA.

Action: Manually remove the old SGA. See your operating system-specific Oracle documentation for instructions. Then retry the STARTUP command.


ORA-01092 ORACLE instance terminated. Disconnection forced

Cause: The instance connected to was terminated abnormally, probably due to a SHUTDOWN ABORT. The current process was forced to disconnect from the instance.

Action: Examine the alert log for more details. Contact the database administrator to determine when the instance is restarted. Attempt to reconnect after the instance is running again.


ORA-01093 ALTER DATABASE CLOSE only permitted with no sessions connected

Cause: There is at least one more session, other than the current one, logged in to the instance. ALTER DATABASE CLOSE is not permitted when other sessions are active.

Action: Find the other sessions and disconnect them. Then reissue the ALTER DATABASE CLOSE statement. Also, issue the SHUTDOWN IMMEDIATE command to force users off the system, or issue the SHUTDOWN ABORT command to shut down the database without waiting for users to be forced off.


ORA-01094 ALTER DATABASE CLOSE in progress. Connections not permitted

Cause: An attempt was made to connect while the database is being closed with the ALTER DATABASE CLOSE statement.

Action: Attempt to connect again when the database is open. Contact the database administrator to find out when the database will be open.


ORA-01095 DML statement processed zero rows

Cause: A DML cursor from the OTEX() call processed 0 rows when executed.

Action: Caller can either do a rollback or ignore the message and execute the rest of the cursors in the cursor array.


ORA-01096 program version (string) incompatible with instance (string)

Cause: The program was linked with a different version of the server than the instance to which it is attempting to connect.

Action: Relink the program against the same version of Oracle as the instance or restart (startup force) the database using the program's version of the SERVER.


ORA-01097 cannot shutdown while in a transaction - commit or rollback first

Cause: An attempt was made to shut down the database while a transaction was in progress.

Action: Either commit or rollback the current transaction and then attempt to shut down the database.


ORA-01098 program Interface error during Long Insert

Cause: The application program interface could not insert or update a LONG column because of an internal error when a TTCGETV call fails. For example, a network read error or one of the parameters passed to the call is invalid.

Action: Retry the insert or update.


ORA-01099 cannot mount database in SHARED mode if started in single process mode

Cause: An attempt was made to mount a database in parallel mode with the initialization parameter SINGLE_PROCESS set to TRUE.

Action: Either mount the database in EXCLUSIVE mode or set the initialization parameter SINGLE_PROCESS to FALSE before starting the instance in parallel (shared) mode.


ORA-01100 database already mounted

Cause: An attempt was made to mount a database with the name of a currently mounted database.

Action: No action is required.


ORA-01101 database being created currently mounted by some other instance

Cause: Some other instance has the database of same name currently mounted and you are trying to create it.

Action: Either change the database name or shut down the other instance.


ORA-01102 cannot mount database in EXCLUSIVE mode

Cause: Some other instance has the database mounted exclusive or shared.

Action: Shut down the other instance or mount in a compatible mode.


ORA-01103 database name 'string' in controlfile is not 'string'

Cause: The database name in the control file does not match your database name.

Action: Either find the correct control file or change your database name.


ORA-01104 number of controlfiles (string) does not equal string

Cause: The number of control files used by this instance disagrees with the number of control files in an existing instance.

Action: Check to make sure that all control files are listed.


ORA-01105 mount is incompatible with mounts by other instances

Cause: An attempt to mount the database discovered that another instance mounted a database by the same name, but the mount is not compatible. Additional errors are reported explaining why.

Action: See accompanying errors.


ORA-01106 database must be closed before dismounting

Cause: An attempt was made to dismount a database before it was closed.

Action: Close the database, then retry the operation.


ORA-01107 database must be mounted for media recovery

Cause: An attempt to perform media recovery was made but the database is not mounted.

Action: Mount the database.


ORA-01108 file string is in backup or media recovery"

Cause: Either media recovery is actively being applied to the file, or it is being backed up while the database is in NOARCHIVELOG mode. It cannot be used for normal database access or crash recovery.

Action: Complete or cancel the media recovery session or backup.


ORA-01109 database not open

Cause: A command was attempted that requires the database to be open.

Action: Open the database and try the command again.


ORA-01110 data file string: 'string'

Cause: This message reports the file name involved with other messages.

Action: See the associated messages for a description of the problem.


ORA-01111 name for data file string is unknown - rename to correct file

Cause: The datafile was missing from a CREATE CONTROLFILE command or BACKUP CONTROLFILE RECOVERY was done with a control file that was saved before the file was created.

Action: Rename the MISSING file to the name of the real file.


ORA-01112 media recovery not started

Cause: An attempt to continue media recovery is being made but media recovery was not started.

Action: No action is required.


ORA-01113 file string needs media recovery

Cause: An attempt was made to open a datafile that is in need of media recovery.

Action: First apply media recovery to the datafile identified in the message, then retry the operation.


ORA-01114 IO error writing block to file string (block # string)

Cause: The device on which the file resides is probably offline. If the file is a temporary file, then it is also possible that the device has run out of space. This could happen because disk space of temporary files is not necessarily allocated at file creation time.

Action: Restore access to the device or remove unnecessary files to free up space.


ORA-01115 IO error reading block from file string (block # string)

Cause: The device on which the file resides is probably off line.

Action: Restore access to the device, then retry the operation.


ORA-01116 error in opening database file string

Cause: Usually the file is not accessible.

Action: Make sure the datafile is in the expected location and can be accessed properly, then retry the operation.


ORA-01117 adding file 'string' with illegal block size: string; limit is string

Cause: An attempt was made to add a datafile with a block size that is greater than the maximum block size allowed.

Action: Retry the operation with a smaller block size.


ORA-01118 cannot add any more database files: limit of string exceeded

Cause: An attempt to add a datafile failed because the limit for such files had already been reached.

Action: If more database space is required, export the database and re-create it with a higher limit for datafiles and perhaps increased file size.


ORA-01119 error in creating database file 'string'

Cause: Insufficient space on device.

Action: Decrease the size of the requested file or allocate a file on another device with more available space. If a file size was not specified in the statement, then specify a file size smaller than the available space on the device.


ORA-01120 cannot remove online database file string

Cause: An attempt was made to drop a datafile when it is online.

Action: Take file offline before dropping.


ORA-01121 cannot rename database file string - file is in use or recovery

Cause: An attempt was made to use ALTER DATABASE RENAME to rename a datafile that is online in an open instance or is being recovered.

Action: Close database in all instances and end all recovery sessions.


ORA-01122 database file string failed verification check

Cause: The information in this file is inconsistent with information from the control file. See accompanying message for reason.

Action: Make certain that the database files and control files are the correct files for this database.


ORA-01123 cannot start online backup; media recovery not enabled

Cause: An attempt to start backup of an online tablespace failed because media recovery is not enabled.

Action: Enable media recovery and retry this operation.


ORA-01124 cannot recover data file string - file is in use or recovery

Cause: An attempt to do media recovery found that the file was not available for recovery. Either it is online and the database is open in some instance, or another process is currently doing media recovery on the file.

Action: Do not do media recovery.


ORA-01125 cannot disable media recovery - file string has online backup set

Cause: An attempt to disable media recovery found that an online backup is still in progress.

Action: End the backup of the offending tablespace and retry this command.


ORA-01126 database must be mounted EXCLUSIVE and not open for this operation

Cause: An operation failed because the database was not mounted in exclusive mode.

Action: Shut down Oracle and mount the database in exclusive mode.


ORA-01127 database name 'string' exceeds size limit of string characters

Cause: The specified database name is too long.

Action: Shorten the database name to eight characters or fewer, then retry the operation.


ORA-01128 cannot start online backup - file string is offline

Cause: An attempt to start an online backup found that one of the files is offline.

Action: Bring the offending files online and retry this command or do a cold backup.


ORA-01129 user's default or temporary tablespace does not exist

Cause: The user's default or temporary tablespace was dropped.

Action: Reassign the default or temporary tablespace.


ORA-01130 database file version string incompatible with ORACLE version string

Cause: The named datafile was created under an incompatible version of Oracle, or the file is invalid or non-existent.

Action: Shut down and restart the correct version of Oracle or check the references to the datafile and make sure it exists.


ORA-01131 DB_FILES system parameter value string exceeds limit of string

Cause: The specified value of the initialization parameter DB_FILES is too large.

Action: Reduce the value of the DB_FILES parameter and retry the operation.


ORA-01132 length of database file name 'string' exceeds limit of string characters

Cause: The specified datafile name is too long.

Action: Shorten the file name and retry the operation.


ORA-01133 length of log file name 'string' exceeds limit of string characters

Cause: The specified redo log file name is too long.

Action: Shorten the file name and retry the operation.


ORA-01134 database mounted exclusive by another instance

Cause: An attempt to access a database failed because it is mounted in exclusive mode by another instance.

Action: Either shut down the other instance or wait for the other instance to either close the database or mount it in parallel mode, before retrying the operation.


ORA-01135 file string accessed for DML/query is offline

Cause: An attempt was made to access a datafile that is offline.

Action: Bring the datafile back online.


ORA-01136 specified size of file string (string blocks) is less than original size of string blocks

Cause: A file size was specified in the AS clause of the ALTER DATABASE CREATE DATAFILE statement, and the size was smaller than the size needed.

Action: Create the file with a larger size.


ORA-01137 data file string is still in the middle of going offline

Cause: It was not possible to get the lock for a file that is offline when attempting to bring it online. The most likely cause is that the lock is still held by the instance that is took it offline.

Action: Wait for the other instance to release the lock on the file.


ORA-01138 database must either be open in this instance or not at all

Cause: The requested operation cannot be done when the database is mounted but not open in this instance, and another instance has the database open.

Action: Execute the operation in an open instance, open the database in this instance, or close the database in the other instances.


ORA-01139 RESETLOGS option only valid after an incomplete database recovery

Cause: The RESETLOGS option was given in ALTER DATABASE OPEN, but there has been no incomplete recovery session.

Action: Reissue the ALTER DATABASE OPEN statement without specifying '.


ORA-01140 cannot end online backup - all files are offline

Cause: All the files were found to be offline when attempting to end an online backup.

Action: No action required. Online backup does not need to be ended for this tablespace.


ORA-01141 error renaming data file string - new file 'string' not found

Cause: An attempt to change a datafile's name in the control file failed because no file was found with the new name.

Action: Make sure that the datafile has been properly renamed by the operating system and retry.


ORA-01142 cannot end online backup - none of the files are in backup

Cause: None of the files were found to be in online backup when attempting to end an online backup.

Action: No action required. Online backup does not need to be ended for this tablespace.


ORA-01143 cannot disable media recovery - file string needs media recovery

Cause: An attempt to disable media recovery found a file that needs media recovery, thus media recovery cannot be disabled.

Action: Recover the offending file or drop the tablespace it belongs to and retry this command.


ORA-01144 File size (string blocks) exceeds maximum of string blocks

Cause: Specified file size is larger than maximum allowable size value.

Action: Specify a smaller size.


ORA-01145 offline immediate disallowed unless media recovery enabled

Cause: ALTER TABLESPACE ... OFFLINE IMMEDIATE or ALTER DATABASE DATAFILE ... OFFLINE is only allowed if the database is in ARCHIVELOG mode.

Action: Take the tablespace offline as usual or do a shutdown abort before attempting the required operation. It is worthwhile reconsidering the backup strategy for the database. The attempted operations can be done if ARCHIVEREDO LOG mode is enabled.


ORA-01146 cannot start online backup - file string is already in backup

Cause: An attempt was made to start an online backup, but an online backup was already started for one of the datafiles.

Action: End the first backup before beginning another.


ORA-01147 SYSTEM tablespace file string is offline

Cause: A file belonging to the SYSTEM tablespace has been marked offline by the database administrator. The database cannot be started until all SYSTEM tablespace files are online and can be opened.

Action: Bring the file online.


ORA-01148 can not mount database PARALLEL without a lock manager installed

Cause: An attempt was made to mount the database PARALLEL without the existence of a Lock Manager.

Action: Mount the database in EXCLUSIVE mode.


ORA-01149 cannot shutdown - file string has online backup set

Cause: An attempt to shut down normally found that an online backup is still in progress.

Action: End the backup of the offending tablespace and retry this command.


ORA-01150 cannot prevent writes - file string has online backup set

Cause: Tablespace cannot be taken offline or made read-only when online backup is running. Ending the backup entails writing the file header, which this operation, were it permitted, would prevent.

Action: End the online backup and then take the tablespace offline or make it read-only.


ORA-01151 use media recovery to recover block, restore backup if needed

Cause: Crash recovery or instance recovery could not apply a change to a block because it was not the next change. This can happen if the block was corrupted and then repaired during recovery. This message is usually accompanied by ORA-01172.

Action: There is additional information for ORA-01172. Perform a RECOVER datafile for the file containing the block. If this does not resolve the problem, restore the file from a backup and recover it again.


ORA-01152 file string was not restored from a sufficiently old backup

Cause: An incomplete recovery session was started, but an insufficient number of redo logs were applied to make the database consistent. This file is still in the future of the last redo log applied. The most likely cause of this message is forgetting to restore the file from backup before doing incomplete recovery.

Action: Apply additional redo log files until the database is consistent or restore the datafiles from an older backup and repeat recovery.


ORA-01153 an incompatible media recovery is active

Cause: Attempted to start an incompatible media recovery or open resetlogs during media recovery or RMAN backup . Media recovery sessions are incompatible if they attempt to recover the same data file. Incomplete media recovery or open resetlogs is incompatible with any media recovery. Backup or restore by RMAN is incompatible with open resetlogs.

Action: Complete or cancel the other media recovery session or RMAN backup.


ORA-01154 database busy. Open, close, mount, and dismount not allowed now

Cause: Some operation is in progress that expects the state of the instance to remain open or mounted.

Action: Wait for the operation to complete and try again. If attempting a normal database shutdown, try SHUTDOWN ABORT.


ORA-01155 the database is being opened, closed, mounted or dismounted

Cause: The attempted operation will not succeed while the instance is in one of the states mentioned in the message.

Action: Wait for the open, close, mount, or dismount to complete and try again. If attempting a normal database shutdown, try SHUTDOWN ABORT.


ORA-01156 recovery in progress may need access to files

Cause: Either media or instance recovery is in progress. The recovery may need access to the files that the attempted operation tried to use.

Action: Wait for the recovery to complete and try again.


ORA-01157 cannot identify/lock data file string - see DBWR trace file

Cause: The background process was either unable to find one of the data files or failed to lock it because the file was already in use. The database will prohibit access to this file but other files will be unaffected. However, the first instance to open the database will need to access all online data files. The accompanying error from the operating system describes why the file could not be identified.

Action: At the operating system level, make the file available to the database. Then either open the database or do an ALTER SYSTEM CHECK DATAFILES.


ORA-01158 database string already mounted

Cause: Another instance has a database by this name mounted.

Action: Find which instance is still running. Perhaps you have not lost the control files after all.


ORA-01159 file is not from same database as previous files - wrong database id

Cause: Not all of the files specified in CREATE CONTROLFILE are from the same database. The database ID of this file does not match that from the first file specified.

Action: Check the list of files provided to the CREATE.


ORA-01160 file is not a string

Cause: The named file in the DATAFILE or LOGFILE section of the CREATE CONTROLFILE command does not appear to be as stated.

Action: Check the mentioned file.


ORA-01161 database name string in file header does not match given name of string

Cause: The database name given at the command line does not match the database name found in the file header.

Action: Chance are good that the database name specified at the command line is incorrect. Resolve the discrepancy, and resubmit the command. If you are attempting to change the database name, be sure to use the SET DATABASE option.


ORA-01162 block size string in file header does not match configured block sizes

Cause: CREATE CONTROLFILE discovered that the block size for this file is incompatible with any of the configured cache blocksizes in the initialization parameter file.

Action: Configure the appropriate cache for this block size using one of the (DB_2K_cache_size, DB_4K_cache_size, DB_8K_cache_size, DB_16K_cache_size, DB_32K_cache_size) parameters.


ORA-01163 SIZE clause indicates string (blocks), but should match header string

Cause: The size specified in bytes in the SIZE clause of the CREATE CONTROLFILE statement does not equate to the number of blocks recorded in the header.

Action: Specify the correct file name and size (in bytes).


ORA-01164 MAXLOGFILES may not exceed string

Cause: MAXLOGFILES specified on the command line too large.

Action: Resubmit the command with a smaller value for MAXLOGFILES.


ORA-01165 MAXDATAFILES may not exceed string

Cause: MAXDATAFILES specified on the command line too large.

Action: Resubmit the command with a smaller value for MAXDATAFILES.


ORA-01166 file number string is larger than string (string)

Cause: File mentioned in CREATE CONTROLFILE has a file number which is larger than that specified for MAXDATAFILES or MAXLOGFILES.

Action: Increase the maximum specified on the command line.


ORA-01167 two files are the same file/group number or the same file

Cause: There is an overlap of file numbers in the files specified on the command line or the same file is specified twice. If they are not the exact same file then one is likely to be a backup of the other. If they are two members of the same log they must be specified together in a group file specification. This message will also appear if the same control file appears more than once in the CONTROL_FILES parameter in the INIT.ORA file. If this happens, check for additional error messages.

Action: Confirm that the file mentioned is not a repeat of a file already mentioned in the command. If they are different files then omit the earlier backup. If they are members of the same log, insure they are in the same group file specification. If this message appears because of a duplicate control file, check the CONTROL_FILES parameter in the INIT.ORA file and see if a file is specified more than once. If all files names appear to be unique, check to make sure that the actual control files themselves are unique. For example, in UNIX check for a symbolic or a hard link to another control file in the list.


ORA-01168 physical block size string does not match size string of other members

Cause: The file is located on a device with a different physical block size than the other members in the group.

Action: Use a physical device with matching block size.


ORA-01169 DATAFILE number 1 not found. Must be present

Cause: Datafile number 1 was not specified in a CREATE CONTROLFILE command.

Action: Locate datafile number 1 and resubmit the CREATE CONTROLFILE command.


ORA-01170 file not found 'string'

Cause: A file specified in the CREATE CONTROLFILE statement was not found. All datafiles and all redo log files, if NORESETLOGS was used, must be accessible by the process that issues the CREATE CONTROLFILE statement.

Action: Check the statement for a typing mistake in the file name and check for the existence of all files. Then issue the statement again after correcting the file names.


ORA-01171 datafile string going offline due to error advancing checkpoint

Cause: The checkpoint in the file header could not be advanced. See accompanying errors for the reason. The datafile will be taken offline the same as for a write error of a data block.

Action: See accompanying errors for details. Restore access to the file, do media recovery, and bring it back online.


ORA-01172 recovery of thread string stuck at block string of file string

Cause: Crash recovery or instance recovery could not apply a change to a block because it was not the next change. This can happen if the block was corrupted and then repaired during recovery.

Action: Do a RECOVER DATAFILE for the file containing the block. If this does not resolve the problem, then restore the file from a backup and recover it.


ORA-01173 data dictionary indicates missing data file from system tablespace

Cause: One of the following:

  • The database is recovered to a point in time in the future of the control file.
  • A datafile from the system tablespace is omitted from the issued CREATE CONTROLFILE statement.

Action: One of the following:

  • Recover the database from a more recent control file.
  • Re-create the control file, ensuring all datafiles are included for the system tablespace in the command line.

ORA-01174 DB_FILES is string buts needs to be string to be compatible

Cause: The maximum number of database files supported by this instance is not the same as for the other instances. All instances must be able to open all the files any instance can open.

Action: Change the value of the DB_FILES parameter to be compatible.


ORA-01175 data dictionary has more than the string files allowed by the instance

Cause: The data dictionary is found to have more files than that which can be supported by this instance.

Action: Shut down the instance and restart with a larger value for DB_FILES.


ORA-01176 data dictionary has more than the string files allowed by the controlfie

Cause: After a CREATE CONTROLFILE, the data dictionary was found to have more datafiles than that supported by the control file.

Action: Re-create the control file with a larger value for MAXDATAFILES.


ORA-01177 data file does not match dictionary - probably old incarnation

Cause: When comparing the control file with the data dictionary after a CREATE CONTROLFILE or OPEN RESETLOGS, it was noted that this datafile was inconsistent with the dictionary. Most likely the file is a backup of a file that was dropped from the database, and the same file number was reused for a new file. It may also be that an incomplete recovery stopped at a time when this file number was used for another datafile.

Action: Do a CREATE CONTROLFILE with the correct file or none at all.


ORA-01178 file string created before last CREATE CONTROLFILE, cannot recreate

Cause: An attempt was made to use ALTER DATABASE CREATE DATAFILE to re-create a datafile that existed at the last CREATE CONTROL file command. The information needed to re-create the file was lost with the control file that existed when the file was added to the database.

Action: Find a backup of the file, and recover it. Do incomplete recovery to time before file was originally created.


ORA-01179 file string does not exist

Cause: During datafile recovery, a file was listed that was not part of the database.

Action: Recheck the file name. Remember to use single quotation marks at the SQL*DBA command line. Remember also that the file name is translated in the operating environment of SQL*DBA.


ORA-01180 can not create datafile 1

Cause: An attempt was made to create datafile 1 using ALTER DATABASE CREATE DATAFILE.

Action: Recover file from a backup or re-create the database.


ORA-01181 file string created before last RESETLOGS, cannot recreate

Cause: An attempt was made to use ALTER DATABASE CREATE DATAFILE to re-create a datafile that existed at the last RESETLOGS database open.

Action: Find a backup of the file, and recover it. Do incomplete recovery to time before file was originally created.


ORA-01182 cannot create database file string - file is in use or recovery

Cause: An attempt was made to use ALTER DATABASE CREATE DATAFILE to re-create a datafile that is online in an open instance or is being recovered.

Action: Close database in all instances and end all recovery sessions.


ORA-01183 cannot mount database in SHARED mode

Cause: Some other instance has the database mounted exclusive.

Action: Shut down the other instance and then mount shared.


ORA-01184 logfile group string already exists

Cause: An ALTER DATABASE ADD LOGFILE statement specified a log number for the new log which is already in use.

Action: Specify a different log file number, or let the database choose an unused value.


ORA-01185 logfile group number string is invalid

Cause: An ALTER DATABASE ADD LOGFILE statement specified a log number for the new log which is too large.

Action: Specify a correct log file number.


ORA-01186 file string failed verification tests

Cause: The datafile did not pass the checks to insure it is part of the database. See the accompanying error messages for the reason the verification failed.

Action: Make the correct file available to the database. Then, either open the database, or execute ALTER SYSTEM CHECK DATAFILES.


ORA-01187 cannot read from file string because it failed verification tests

Cause: The datafile did not pass the checks to insure it is part of the database. Reads are not allowed until it is verified.

Action: Make the correct file available to the database. Then, either open the database, or execute ALTER SYSTEM CHECK DATAFILES.


ORA-01188 Block size string in header does not match physical block size string

Cause: A log file member given to CREATE CONTROLFILE is on a physical device that has a different block size than the device originally used to create the log.

Action: Move the file to a device with the correct block size or use the RESETLOGS option to CREATE CONTROLFILE.


ORA-01189 file is from a different RESETLOGS than previous files

Cause: In a CREATE CONTROLFILE command, either this file or all previous files were backups from before the last RESETLOGS. This may also occur if this is a file that is offline and has been offline since before the last RESETLOGS.

Action: If the file was taken offline normal before the last RESETLOGS, and is still offline, omit it from the CREATE CONTROLFILE command. Rename and online the file after the database is open. Otherwise find the version of the mentioned file consistent with the rest of the datafiles and resubmit the command.


ORA-01190 controlfile or data file string is from before the last RESETLOGS

Cause: An attempt was made to use a datafile when the log reset information in the file does not match the control file. Either the datafile or the control file is a backup that was made before the most recent ALTER DATABASE OPEN RESETLOGS.

Action: Restore file from a more recent backup.


ORA-01191 file string is already offline - cannot do a normal offline

Cause: When attempting to do a normal tablespace offline, it was discovered that one of the files in the tablespace was already offline.

Action: Either bring the datafile online first, or use another tablespace offline option.


ORA-01192 must have at least one enabled thread

Cause: At least two redo log files from at least one thread must be specified in the CREATE CONTROLFILE command line.

Action: Find the missing redo log files and retry the command with the newly found redo log files included in the command line.


ORA-01193 file string is not the same file seen at start of recovery

Cause: A different copy of the file was accessed the last time media recovery looked at the file header. A backup of the file was restored or the meaning of the file name changed during recovery.

Action: Ensure the correct file is available, and then retry recovery.


ORA-01194 file string needs more recovery to be consistent

Cause: An incomplete recovery session was started, but an insufficient number of logs were applied to make the file consistent. The reported file was not closed cleanly when it was last opened by the database. It must be recovered to a time when it was not being updated. The most likely cause of this error is forgetting to restore the file from a backup before doing incomplete recovery.

Action: Either apply more logs until the file is consistent or restore the file from an older backup and repeat recovery.


ORA-01195 online backup of file string needs more recovery to be consistent

Cause: An incomplete recovery session was started, but an insufficient number of logs were applied to make the file consistent. The reported file is an online backup which must be recovered to the time the backup ended.

Action: Either apply more logs until the file is consistent or restore the database files from an older backup and repeat recovery.


ORA-01196 file string is inconsistent due to a failed media recovery session

Cause: The file was being recovered but the recovery did not terminate normally. This left the file in an inconsistent state. No more recovery was successfully completed on this file.

Action: Either apply more logs until the file is consistent or restore the backup again and repeat recovery.


ORA-01197 thread string only contains one log

Cause: During CREATE CONTROLFILE all threads represented in the logs must be represented by at least two logs. A "last log" and a second log. The named thread does not contain two such logs.

Action: Either find more logs from the named thread. Or use the RESETLOGS option to CREATE CONTROLFILE.


ORA-01198 must specify size for log file if RESETLOGS

Cause: File sizes must be given for all log files if doing a CREATE CONTROLFILE with the RESETLOGS option.

Action: Resubmit the command with the appropriate log file size.


ORA-01199 file string is not in online backup mode

Cause: An attempt was made to end an online backup for a file that is not in online backup.

Action: Do not enter command since it is not needed.


ORA-01200 actual file size of string is smaller than correct size of string blocks

Cause: The size of the file as returned by the operating system is smaller than the size of the file as indicated in the file header and the control file. Somehow the file has been truncated. Maybe it is the result of a half completed copy.

Action: Restore a good copy of the datafile and do recovery as needed.


ORA-01201 file string header failed to write correctly

Cause: An I/O error was reported for the file header. The error was trapped and a second attempt will be made.

Action: The file probably will require recovery. Further error messages will indicate what is needed.


ORA-01202 wrong incarnation of this file - wrong creation time

Cause: The creation time in the file header is not the same as the creation time in the control file. This is probably a copy of a file that was dropped.

Action: Restore a current copy of the datafile and do recovery as needed.


ORA-01203 wrong incarnation of this file - wrong creation SCN

Cause: The creation SCN in the file header is not the same as the creation SCN in the control file. This is probably a copy of a file that was dropped.

Action: Restore a current copy of the datafile and do recovery as needed.


ORA-01204 file number is string rather than string - wrong file

Cause: The file number in the file header is not correct. This is probably a restored backup of the wrong file, but from the same database.

Action: Restore a copy of the correct datafile and do recovery as needed.


ORA-01205 not a data file - type number in header is string

Cause: The file type in the header is not correct for a datafile. This is probably a log file or control file. If the type is not a small non-zero positive number then the header is corrupted.

Action: Restore a copy of the correct datafile and do recovery as needed.


ORA-01206 file is not part of this database - wrong database id

Cause: The database ID in the file header does not match the database ID in the control file. The file may be from a different database, or it may not be a database file at all. If the database was rebuilt, this may be a file from before the rebuild. Note that if you see this error when the file is supposed to be plugged in from another database via the Transportable Tablespace feature, it means the database ID in the file header does not match the one expected.

Action: Restore a copy of the correct datafile and do recovery as needed.


ORA-01207 file is more recent than controlfile - old controlfile

Cause: The control file change sequence number in the datafile is greater than the number in the control file. This implies that the wrong control file is being used. Note that repeatedly causing this error can make it stop happening without correcting the real problem. Every attempt to open the database will advance the control file change sequence number until it is great enough.

Action: Use the current control file or do BACKUP CONTROLFILE RECOVERY to make the control file current. Be sure to follow all restrictions on doing a BACKUP CONTROLFILE RECOVERY.


ORA-01208 data file is an old version - not accessing current version

Cause: The checkpoint in the file header is less recent than in the control file. If opening a database that is already open by another instance, or if another instance just brought this file online, the file accessed by this instance is probably a different version. Otherwise, a backup of the file probably was restored while the file was in use.

Action: Make the correct file available to the database. Then, either open the database, or execute ALTER SYSTEM CHECK DATAFILES.


ORA-01209 data file is from before the last RESETLOGS

Cause: The reset log data in the file header does not match the control file. If the database is closed or the file is offline, the backup is old because it was taken before the last ALTER DATABASE OPEN RESETLOGS statement. If opening a database that is open already by another instance, or if another instance just brought this file online, the file accessed by this instance is probably a different version. Otherwise, a backup of the file probably was restored while the file was in use.

Action: Make the correct file available to the database. Then, either open the database or execute ALTER SYSTEM CHECK DATAFILES.


ORA-01210 data file header is media corrupt

Cause: The file header block is internally inconsistent. The beginning of the block has a header with a checksum and other data for insuring the consistency of the block. It is possible that the last disk write did not operate correctly. The most likely problem is that this is not a datafile for any database.

Action: Have operating system make correct file available to database. If the trace file dump indicates that only the checksum is wrong, restore from a backup and do media recovery.


ORA-01211 Oracle7 data file is not from migration to Oracle8

Cause: The file is not a copy of the file LAST used under Oracle7. This datafile is either a backup taken from before the migration, or the database was opened by Oracle7 after the migration utility was run. When converting a database from Oracle7 to Oracle8, the migration program MUST be the LAST utility to access the database under Oracle7. Only the datafiles that were current when the migration was done may be accessed by Oracle8.

Action: Have operating system make correct datafile available to database, or repeat the Oracle7 to Oracle8 migration. Make sure that database is NOT opened after migration utility is run.


ORA-01212 MAXLOGMEMBERS may not exceed string

Cause: MAXLOGMEMBERS specified on the command line too large.

Action: Resubmit the command with a smaller value for MAXLOGMEMBERS.


ORA-01213 MAXINSTANCES may not exceed string

Cause: MAXINSTANCES specified on the command line too large.

Action: Resubmit the command with a smaller value for MAXINSTANCES.


ORA-01214 MAXLOGHISTORY may not exceed string

Cause: MAXLOGHISTORY specified on the command line too large.

Action: Resubmit the command with a smaller value for MAXLOGHISTORY.


ORA-01215 enabled thread string is missing after CREATE CONTROLFILE

Cause: A CREATE CONTROLFILE statement was given which did not list all the enabled threads for the database.

Action: Reissue the CREATE CONTROLFILE statement, including all enabled threads.


ORA-01216 thread string is expected to be disabled after CREATE CONTROLFILE

Cause: A thread that was given during CREATE CONTROLFILE is enabled, but the datafiles indicate that it should be disabled. This is probably because the logs supplied to the CREATE CONTROLFILE are old (from before the disabling of the thread).

Action: This thread is not required to run the database. The CREATE CONTROLFILE statement can be reissued without the problem thread, and, if desired, the thread can be re-created after the database is open.


ORA-01217 logfile member belongs to a different logfile group

Cause: A member of a multiple-member log file group specified in a CREATE CONTROLFILE is not part of the same group as previous members.

Action: Group together the correct members for the CREATE CONTROLFILE command.


ORA-01218 logfile member is not from the same point-in-time

Cause: A member of a multiple-member log file group is from a different point in time. One of the members specified may be an older (backup) copy of the log.

Action: Find the correct version of the log, or leave it out of the CREATE CONTROLFILE command.


ORA-01219 database not open: queries allowed on fixed tables/views only

Cause: A query was issued against an object not recognized as a fixed table or fixed view before the database has been opened.

Action: Re-phrase the query to include only fixed objects, or open the database.


ORA-01220 file based sort illegal before database is open

Cause: A query issued against a fixed table or view required a temporary segment for sorting before the database was open. Only in-memory sorts are supported before the database is open.

Action: Re-phrase the query to avoid a large sort, increase the values of the SORT_AREA_SIZE and/or SORT_AREA_RETAINED_SIZE initialization parameters to enable the sort to be done in memory.


ORA-01221 data file string is not the same file to a background process

Cause: When the database writer opens the datafile, it is accessing a different physical file than the foreground doing the recovery. The timestamp set in the file header by the foreground was not found by the background. It may be that the background process could not read the file at all.

Action: Look in the DBWR trace file for the error it received when attempting to read the file header. Reconfigure the operating system as needed to have the file name successfully access the same file when opened by a background process.


ORA-01222 MAXINSTANCES of string requires MAXLOGFILES be at least string, not string

Cause: An attempt was made to create a database or control file that does not have room for at least two logs per thread of redo. A thread of redo must have two online logs in order to be enabled. It does not make sense to allow more redo threads than can be supported by the logs.

Action: Either reduce the MAXINSTANCES argument or increase the value of MAXLOGFILES.


ORA-01223 RESETLOGS must be specified to set a new database name

Cause: The SET database name option was specified to CREATE CONTROLFILE, but RESETLOGS was not specified. The database name can only be changed when opening the database with RESETLOGS.

Action: Either add the RESETLOGS option or drop the SET option to CREATE CONTROLFILE.


ORA-01224 group number in header string does not match GROUP string

Cause: Group number specified at CREATE CONTROLFILE does not match the group number stored in the header. Most likely the specification is wrong.

Action: Omit the GROUP option or give the correct one.


ORA-01225 thread number string is greater than MAXINSTANCES string

Cause: The log is for a thread greater than the MAXINSTANCES argument.

Action: Increase the value for MAXINSTANCES and resubmit the command.


ORA-01226 file header of log member is inconsistent with other members

Cause: The log file member in the accompanying error is for the same group as the previous members, but other fields in the header are different. Either a file header is corrupted, or some file is a member of a deleted log.

Action: Find the correct log member or omit this member from the command.


ORA-01227 log string is inconsistent with other logs

Cause: The log file in the accompanying error is inconsistent with the contents of other logs given in the CREATE CONTROLFILE command. Either a file header is corrupted, or some file is an old copy rather than the current version. The problem may not be with the log listed since all that can be detected is that there is an inconsistency. All log files listed in the command must be the current versions of the online logs.

Action: Find the correct online logs or use the RESETLOGS option.


ORA-01228 SET DATABASE option required to install seed database

Cause: The SET DATABASE option was not included in the CREATE CONTROLFILE command when installing a seed database. The database does not have a database ID because it is intended to be installed at multiple sites, and each site needs to be a different database with its own database id. Both the SET DATABASE and RESETLOGS options must be specified to create the control file for this database.

Action: Resubmit command with the SET DATABASE and RESETLOGS options.


ORA-01229 data file string is inconsistent with logs

Cause: The datafile in the accompanying error is inconsistent with the contents of the logs given in the CREATE CONTROLFILE command. The most likely cause is that one or more of the online logs was missing from the command. It is also possible that one or more of the logs is an old copy rather than the current version. All online log files must be listed in the command and must be the current versions of the online logs.

Action: Find the correct online logs or use the RESETLOGS option.


ORA-01230 cannot make read only - file string is offline

Cause: An attempt to make a tablespace read only found that one of its files is offline.

Action: Bring the file online and retry this command.


ORA-01231 cannot make read write - file string is offline

Cause: An attempt to make a tablespace read write found that one of its files is offline.

Action: Bring the file online and retry this command.


ORA-01232 cannot start online backup - file string is read only

Cause: An attempt to start an online backup found that one of the files is marked read only. Read-only files do not need to be set into online backup mode.

Action: Make the backup without the begin backup command.


ORA-01233 file string is read only - cannot recover using backup controlfile

Cause: An attempt to do media recovery using a backup control file found that one of the files is marked read only. Read-only files do not normally need to be recovered, but recovery with a backup control file must recover all online files.

Action: If the file really is read only, take it offline before the recovery, and bring the read-only tablespace online after the database is open. If the file does need recovery use a control file from the time the file was read-write. If the correct control file is not available, use CREATE CONTROLFILE to make one.


ORA-01234 cannot end backup of file string - file is in use or recovery

Cause: An attempt was made to end an online backup of file when the file is busy. Some operation such as recovery or rename may be active, or there may still be some instance that has the database open with this file online.

Action: If there is an instance with the database open then the backup can be ended there by using the ALTER TABLESPACE command. Otherwise wait for the completion of the other operation.


ORA-01235 END BACKUP failed for string file(s) and succeeded for string

Cause: One or more of the files in an end backup command failed. Some other files given in the same command may have succeeded.

Action: See the accompanying error messages for the reason the backups could not be ended. Any files not listed in the error messages were successful.


ORA-01236 Error string occurred during initialization of file header access

Cause: The indicated error occurred while doing initialization processing of file headers.

Action: The error indicated should be corrected. An attempt is made to recover from this error by using a slower access algorithm.


ORA-01237 cannot extend datafile string

Cause: An operating system error occurred during the resize.

Action: Fix the cause of the operating system error and retry the command.


ORA-01238 cannot shrink datafile string

Cause: An operating system error occurred during the resize.

Action: The error is ignored, operation continues normally.


ORA-01239 database must be in ARCHIVELOG mode to use external cache

Cause: An online file uses an external cache, but the database is in NOARCHIVELOG mode. Since an external cache may require media recovery this cannot be allowed.

Action: Change database to be in ARCHIVELOG mode or do not use an external cache.


ORA-01240 too many data files to add in one command

Cause: The command specifies adding more datafiles than can be done in one command. It is necessary to fit all the file names into one log entry, but that would make the entry too large.

Action: If this is a CREATE TABLESPACE command, create with fewer files then add the other files later. If this is an ADD DATAFILE command, break it up into multiple commands.


ORA-01241 an external cache has died

Cause: The external cache may have been restarted.

Action: Take the file mentioned in the error stack offline, perform media recovery, bring the file online, and retry the attempted operation. You may also restart all instances to make sure they access all datafiles through consistent external caches.


ORA-01242 data file suffered media failure: database in NOARCHIVELOG mode

Cause: The database is in NOARCHIVELOG mode and a database file was detected as inaccessible due to media failure.

Action: Restore accessibility to the file mentioned in the error stack and restart the instance.


ORA-01243 system tablespace file suffered media failure

Cause: A system tablespace file was detected as inaccessible due to media failure.

Action: Restore accessibility to the file mentioned in the error stack and restart the instance.


ORA-01244 unnamed datafile(s) added to controlfile by media recovery

Cause: Media recovery with a backup control file or a control file that was rebuilt, encountered the creation of a datafile that was not in the control file. An entry has been added to the control file for the new datafiles, but with the file name UNNAMEDnnnn, where nnnn is the file number. Attached errors describe the file names that were originally used to create the files.

Action: Rename the files to valid file names and resume recovery. If necessary the ALTER DATABASE CREATE DATAFILE statement may be used to create a file suitable for recovery and do the rename. If the file is not going to be recovered then take it offline with the FOR DROP option.


ORA-01245 offline file string will be lost if RESETLOGS is done

Cause: An attempt was made to do an OPEN RESETLOGS with a file that will be lost because it is offline. The file was not taken offline with the FOR DROP option.

Action: Either bring the file online and recover it, or take it offline with the FOR DROP option.


ORA-01246 recovering files through TSPITR of tablespace string

Cause: The files named in the accompanying errors are backups that were made before a tablespace point in time recovery of this tablespace. They cannot be recovered to a time after the point in time recovery.

Action: Restore more recent backups and recover them.


ORA-01247 database recovery through TSPITR of tablespace string

Cause: Recovery of the whole database encountered redo indicating there was a point in time recovery of the tablespace. The new version of the files in the tablespace should be included in the recovery, but that was not done.

Action: If the tablespace should not be recovered, take its file offline for drop. If it should be recovered, then restore or rename as needed and restart the recovery.


ORA-01248 file string was created in the future of incomplete recovery

Cause: An attempt was made to do a RESETLOGS open with a file entry in the control file that was originally created after the UNTIL time of the incomplete recovery. Allowing such an entry may hide the version of the file that is needed at this time. The file number may be in use for a different file which would be lost if the RESETLOGS was allowed.

Action: If more recovery is desired then apply redo until the creation time of the file is reached. If the file is not wanted and the same file number is not in use at the stop time of the recovery, then the file can be taken offline with the FOR DROP option. Otherwise a different control file is needed to allow the RESETLOGS. Another backup can be restored and recovered, or a control file can be created via CREATE CONTROLFILE.


ORA-01249 archiving not allowed in a clone database

Cause: An attempt was made to archive an online redo log or enable archiving for a clone database.

Action: Do not attempt to archive from a clone. The archive log destination could easily be the same as the primary database destroying its archived logs. If archiving is needed, then re-create the database not as a clone.


ORA-01250 Error string occurred during termination of file header access

Cause: The indicated error occurred while terminating the processing of file headers. The error was other than a write error.

Action: The indicated error should be corrected.


ORA-01251 Unknown File Header Version read for file number string

Cause: Read of the file header returned a record but its version cannot be identified. Either the header has been corrupted, or the file is not a valid database file.

Action: Have the operating system make the correct file available to the database, or recover the file.


ORA-01252 cannot prevent writes - file string in recovery manager backup

Cause: An attempt to make a tablespace read only or offline normal found that a recovery manager proxy backup is in progress. If the file is made offline or read only, then the file header cannot be updated when the backup is complete.

Action: Wait for the Recovery Manager backup to complete and retry this command.


ORA-01253 cannot start online backup - file string in recovery manager backup

Cause: The specified file is being backed up by Recovery Manager.

Action: Wait for the Recovery Manager proxy backup to complete before starting another backup.


ORA-01254 cannot end online backup - file string in recovery manager backup

Cause: The specified file is being backed up by Recovery Manager.

Action: Wait for the Recovery Manager proxy backup to complete. Recovery Manager backup mode cannot be initiated or terminated manually.


ORA-01255 cannot shutdown - file string in recovery manager backup

Cause: An attempt to shut down normally found that a Recovery Manager backup is still in progress.

Action: Wait for the Recovery Manager proxy backup to complete and retry this command.


ORA-01256 error in locking database file string

Cause: The file is in use by another database instance.

Action: Determine which database instance legitimately owns the file.


ORA-01257 cannot reuse database file string, unknown file size

Cause: The size of the raw partion cannot be determined.

Action: Add the datafile/logfile by specifying the size parameter.


ORA-01258 unable to delete temporary file string

Cause: A DROP TABLESPACE INCLUDING CONTENTS AND DATAFILES or ALTER DATABASE TEMPFILE DROP INCLUDING DATAFILES operation was not able to delete a temporary file in the database.

Action: Subsequent errors describe the operating system error that prevented the file deletion. Fix the problem, if possible, and manually purge the file.


ORA-01259 unable to delete datafile string

Cause: A DROP TABLESPACE INCLUDING CONTENTS AND DATAFILES operation was not able to delete a datafile in the tablespace.

Action: Subsequent errors describe the operating system error that prevented the file deletion. Fix the problem, if possible, and manually purge the file.


ORA-01260 may not issue ALTER DATABASE END BACKUP when database is open

Cause: ALTER DATABASE END BACKUP was issued while the database was open.

Action: Either use ALTER DATABASE DATAFILE <filename> END BACKUP to end backup for specific files, or ALTER TABLESPACE <name> END BACKUP if backup is complete for all files in a tablespace.


ORA-01261 Parameter string destination string cannot be translated

Cause: The value for the specified parameter contained a destination string that could not be translated.

Action: Use a valid destination string in the specified parameter.


ORA-01262 Stat failed on a file destination directory

Cause: Unable to get information about an Oracle Managed Files destination directory.

Action: Check the permissions on the directory or use a different directory name.


ORA-01263 Name given for file destination directory is invalid

Cause: The name given for an Oracle Managed Files destination does not correspond to a directory.

Action: Use a different name.


ORA-01264 Unable to create string file name

Cause: Unable to create an Oracle Managed Files name for a datafile, logfile or control file.

Action: Check previous error messages for the reason Oracle was unable to create the file name. Take corrective action, if possible, and retry the command.


ORA-01265 Unable to delete file string

Cause: An error prevented the file from being deleted.

Action: Subsequent errors describe the operating system error that prevented the file deletion. Fix the problem, if possible, and manually purge the file.


ORA-01266 Unable to create unique file name

Cause: Unable to create a unique file name for an Oracle Managed Files datafile, logfile, or control file. Oracle tried several names but each file name was already in use in the default destination directory for the file type.

Action: Retry the operation. If that fails, it may be necessary to change the default destination directory for the file type and then retry.


ORA-01267 Failure getting date/time

Cause: Could not get date/time when trying to create unique file name.

Action: Internal error - contact Oracle Support Services.


ORA-01268 invalid TEMPFILE clause for alter of permanent TABLESPACE

Cause: A TEMPFILE clause was specified for an ALTER TABLESPACE for a permanent tablespace.

Action: Retry with a DATAFILE clause.


ORA-01269 Destination parameter string is too long

Cause: The value for DB_CREATE_FILE_DEST or DB_CREATE_ONLINE_LOG_DEST_n parameter is too long.

Action: Replace the destination value for the specified parameter with a shorter character string.


ORA-01270 string operation is not allowed if STANDBY_PRESERVES_NAMES is true

Cause: An operation that renames or adds/drops a file was attempted at a standby database and STANDBY_PRESERVES_NAMES is true.

Action: Set STANDBY_PRESERVES_NAMES to false if the operation must be performed.


ORA-01271 Unable to create new file name for file string

Cause: During standby database recovery an error occurred when trying to create a new file name for the indicated file.

Action: Use the ALTER DATABASE CREATE DATAFILE command with a new unique name and then resume the standby database recovery.


ORA-01272 REUSE only allowed when a file name is provided

Cause: The REUSE parameter was specified in a command without a file name.

Action: Either supply a file name or remove the REUSE parameter.


ORA-01273 STANDBY_FILE_MANAGEMENT = AUTO needs COMPATIBLE = string or higher

Cause: The COMPATIBLE initialization parameter was not set to the correct value for setting STANDBY_FILE_MANAGEMENT to AUTO.

Action: Restart the instance with COMPATIBLE set to the correct release.


ORA-01274 cannot add datafile 'string' - file could not be created

Cause: Automated standby file management was enabled but an added file could not automatically be created on the standby. The error from the creation attempt is displayed in another message. The controlfile file entry for the file will be 'UNNAMEDnnnnn'.

Action: Temporarily set STANDBY_FILE_MANAGEMENT to MANUAL and use the ALTER DATABASE CREATE DATAFILE statement to create the file. Then set STANDBY_FILE_MANAGEMENT to AUTO and restart standby recovery.


ORA-01275 Operation string is not allowed if standby file management is automatic.

Cause: An operation that renames, adds, or drops a file was attempted at a standby database and STANDBY_FILE_MANAGEMENT was set to AUTO.

Action: Set STANDBY_FILE_MANAGEMENT to MANUAL if the operation must be performed.


ORA-01276 Cannot add file string. File has an Oracle Managed Files file name.

Cause: An attempt was made to add to the database a datafile, log file, or control file with an Oracle Managed Files file name.

Action: Retry the operation with a new file name.


ORA-01277 file 'string' already exists

Cause: An ALTER DATABASE BACKUP CONTROLFILE TO TRACE AS 'filename' statement specified a file name which is already in use.

Action: Either specify a different file name or add the REUSE parameter to the statement to overwrite the existing file.


ORA-01278 error creating file 'string'

Cause: An operating system error occurred while attempting to create a trace file specified in the ALTER DATABASE BACKUP CONTROLFILE TO TRACE AS 'filename' statement.

Action: Check the error stack for more detailed information.


ORA-01279 DB_FILES too large

Cause: DB_FILES has been set too high to be supported by the system.

Action: Decrease the value of DB_FILES.


ORA-01280 Fatal LogMiner Error.

Cause: On of the following:

  • One or more input parameters in the DBMS_LOGMNR.START_LOGMNR() procedure may be invalid.
  • The start or the end SCN may not be available in the log files selected.
  • The dictionary file specified may be from a different database than the one that generated the log files.
  • LogMiner may have encountered an internal error from which it cannot recover.

Action: Check to see whether the input parameters are valid. The V$LOGMNR_LOGS view can be queried to see the SCN ranges that are valid for the set of log files specified, and the DB_ID of the database that generated the log files.


ORA-01281 SCN range specified in dbms_logmnr.start_logmnr() is invalid

Cause: StartSCN may be greater than EndSCN, or the SCN specified may be invalid.

Action: Specify a valid SCN range.


ORA-01282 date range specified in dbms_logmnr.start_logmnr() is invalid

Cause: The specified Date value is invalid for the log file.

Action: Specify a valid date range.


ORA-01283 Options specified is invalid

Cause: The specified Options is invalid for the procedure.

Action: Specify valid Options.


ORA-01284 file string cannot be opened

Cause: The specified file cannot be opened.

Action: Check to make sure the file or directory exists and is accessible.


ORA-01285 error reading file string

Cause: The file or directory may not exist or is inaccessible.

Action: Specify valid file or directory. Make sure that file and directory are accessible.


ORA-01286 cannot add file string due to DB_ID mismatch

Cause: The log file is produced by a different database than other log files already added to the list.

Action: Specify a log file produced by the same database.


ORA-01287 file string is from a different database incarnation

Cause: The logfile was produced by a different incarnation of the database.

Action: Add a logfile that is produced by the same incarnation.


ORA-01288 file string is from a different database incarnation

Cause: The logfile is produced by a different incarnation of the database.

Action: Add a logfile that is produced by the same incarnation.


ORA-01289 cannot add duplicate logfile string

Cause: The log file specified has already been added to the list of log files.

Action: Specify a different log file.


ORA-01290 cannot remove unlisted logfile string

Cause: The user attempted to remove a log file that is not present in the list.

Action: Specify a valid logfile.


ORA-01291 missing logfile

Cause: Not all logfiles corresponding to the data or scn range specified have been added to the list.

Action: Check the v$logmnr_logs view to determine the missing scn range, and add the relevant logfiles.


ORA-01292 no log file has been specified for the current LogMiner session

Cause: No log file has been specified for the LogMiner session.

Action: Specify at least one log file.


ORA-01293 time or SCN range not fully contained in the listed logfiles

Cause: The input date/SCN range is not fully contained within the log files specified for the session.

Action: Select out of V$LOGMNR_LOGS view to check the date or SCN range covered by the log files specified for the LogMiner session, and reissue the procedure with appropriate date or SCN range.


ORA-01294 error occurred while processing information in dictionary file string, possible corruption

Cause: The dictionary file is corrupt.

Action: Get a new dictionary file.


ORA-01295 DB_ID mismatch between dictionary string and logfiles

Cause: The dictionary file is produced by a database that is different from that produced the log files.

Action: Specify a compatible dictionary file.


ORA-01296 character set mismatch between dictionary string and logfiles

Cause: The character set of the database that produced the dictionary file is different from the character set of the database that produced the log files.

Action: Specify a dictionary file with the same character set.


ORA-01297 redo version mismatch between dictionary string and logfiles

Cause: The redo version of the database generating the dictionary is different from the one generating the logfiles.


ORA-01298 dictionary string and the earliest logfile are not SCN-compatible

Cause: The dictionary materialized view was taken at a SCN that does not correspond to the creation SCN of the earliest logfile.

Action: Get a correct dictionary materialized view.


ORA-01299 dictionary string corresponds to a different database incarnation

Cause: The dictionary file was extracted from a different incarnation of the database.

Action: Specify a dictionary file extracted from the correct database incarnation.


ORA-01300 enabled thread bit vector mismatch between dictionary string and the earliest logfile

ORA-01301 dbms_logmnr.USE_COLMAP can only be used with a valid dictionary

Cause: DBMS_LOGMNR.USE_COLMAP can only be used with a valid dictionary.

Action: Specify the dictionary file in DBMS_LOGMNR.START_LOGMNR().


ORA-01302 syntax error in logmnr.opt file

Cause: A syntax error was detected in the logmnr.opt file.

Action: Use correct syntax.


ORA-01303 schema string, specified in logmnr.opt file, does not exist

Cause: The schema specified does not exist.

Action: Specify a correct schema or a compatible dictionary file.


ORA-01304 table string, schema string, specified in logmnr.opt file, does not exist

Cause: The table specified in the logmnr.opt file does not exist in the dictionary provided to LogMiner.

Action: Make sure that the table specified is valid.


ORA-01305 column string, specified in logmnr.opt file, does not exist in table string, schema string

Cause: The column specified in the logmnr.opt file does not exist for the table definition in the dictionary provided for LogMiner.

Action: Make sure that the column specified is valid.


ORA-01306 dbms_logmnr.start_logmnr() must be invoked before selecting from v$logmnr_contents

Cause: A select was issued from V$LOGMNR_CONTENTS without first invoking the DBMS_LOGMNR.START_LOGMNR() procedure.

Action: Invoke the DBMS_LOGMNR.START_LOGMNR() procedure before issuing a select from the V$LOGMNR_CONTENTS view.


ORA-01307 no LogMiner session is currently active

Cause: A select was issued from V$LOGMNR_CONTENTS without first invoking the DBMS_LOGMNR.START_LOGMNR() procedure. Otherwise, DBMS_LOGMNR.END_LOGMNR() was called without a prior call to DBMS_LOGMNR.START_LOGMNR() or DBMS_LOGMNR.ADD_LOGFILE()

Action: Invoke the DBMS_LOGMNR.START_LOGMNR() procedure before issuing a select from the V$LOGMNR_CONTENTS view.


ORA-01308 initialization parameter utl_file_dir is not set

Cause: UTL_FILE_DIR is not set in the initialization parameter file.

Action: Set UTL_FILE_DIR to the appropriate directory.


ORA-01309 invalid session

Cause: The specified Logminer session ID or session handle is invalid.

Action: Use a valid Logminer session ID or session handle.


ORA-01310 requested return type not supported by the lcr_mine function

Cause: The return type requested by the user is not supported by LCR_MINE.

Action: Pick a return type supported by the LCR_MINE function.


ORA-01311 Illegal invocation of the mine_value function

Cause: An attempt was made to use the MINE_VALUE function on a column other than redo_value or undo_value columns of SYS.V$LOGMNR_CONTENTS fixed table/view.

Action: Rewrite the SQL statement with a legal invocation of MINE_VALUE.


ORA-01312 Specified table/column does not exist

Cause: The table/column specified in the LCR_MINE call does not exist at the the specified SCN. The table/column definition has to exist at the start SCN specified for lcr_mine to be able to identify the table/column correctly.

Action: Create a LogMiner session at a start SCN at which the table definition is available.


ORA-01313 LogMiner dictionary column type different from specified type

Cause: The return type specified for the column in the LCR_MINE call is different from the actual type of the column.

Action: Rewrite the LCR_MINE invocation with the right return type.


ORA-01314 Name of the column to be mined should be a string literal

Cause: The fully qualified name of the column to be mined by the LogMiner functions should be string literal.

Action: If the fully qualified name of the column to be mined is a.b.c.d, enclose the column name in quotes as in 'a.b.c.d'.


ORA-01315 Log file has been added or removed during select

Cause: A redo log file has been added or removed while selecting on the v$logmnr_logs fixed view.

Action: Re-issue the SQL select statement on the v$logmnr_logs view.


ORA-01316 Already attached to a Logminer session

Cause: A Logminer attach session was issued while already attached to a Logminer session.

Action: Detach from the current Logminer session and attach to the requested session.


ORA-01317 Not attached to a Logminer session

Cause: A command or procedure was issued which requires an attached Logminer session.

Action: Attach to a Logminer session before issuing the command or procedure.


ORA-01318 Logminer session not started

Cause: Logminer activate session was called before prepare session.


ORA-01319 Invalid Logminer session attribute

Cause: A session attribute was supplied which is invalid.

Action: Re-issue with a valid session attribute.


ORA-01320 Invalid Logminer dictionary attribute

Cause: A Logminer dictionary attribute was supplied which is invalid.

Action: Re-issue with a valid dictionary attribute.


ORA-01321 SCN range not fully contained in the listed logfiles

Cause: The input date/SCN range is not fully contained within the logfiles specified for the session.

Action: select out of v$logmnr_logs view to check the date or SCN range covered by the logfiles specified for the LogMiner session , and reissue the procedure with appropriate date or SCN range.


ORA-01322 No such table

Cause: An non-existent table was supplied to Logminer include_src_tbl() or exclude_src_table().

Action: Re-issue with a valid table name.


ORA-01323 Invalid state

Cause: A Logminer routine was called from the wrong state.


ORA-01324 cannot add file due to DB_ID mismatch

Cause: The logfile was produced by a different database than other logfiles already added to the list.

Action: Specify a logfile produced by the same database.


ORA-01325 archive log mode must be enabled to build into the logstream

Cause: The database does not have archivelog mode enabled.

Action: Ensure that initialization parameters enabling archivelog mode are set. For example:

log_archive_start=true
log_archive_dest="ORACLE_HOME/dbs"
log_archive_format="archstring.log"

Mount the database and issue commands to enable archivelog mode.

startup pfile=initsid.ora mount
ALTER DATABASE ARCHIVELOG
ALTER DATABASE OPEN


ORA-01326 compatibility of 9.0.0 or greater required to build into the logstream

Cause: The COMPATIBLE initialization parameter is set to some value less than 9.0.0.

Action: Ensure that the COMPATIBLE initialization parameter is set to 9.0.0 or higher. For example:

COMPATIBLE = 9.0.0.0.0


ORA-01327 failed to exclusively lock system dictionary as required by build

Cause: Other users are performing DDL operations.


ORA-01328 only one build operation may occur at one time

Cause: Another process is simultaneously attempting to run build().

Action: Wait until the other process completes.


ORA-01329 unable to truncate required build table

Cause: The table may be missing or locked by another user.

Action: This error should not occur. If it does occur and there is reason to believe that required tables are missing, then as a last resort the package dbmslmd.sql may be reinstalled. Doing so will delete all existing Logminer Dictionary data.


ORA-01332 internal Logminer Dictionary error

Cause: Unexpected error condition.

Action: Check the trace file.


ORA-01333 failed to establish Logminer Dictionary

Cause: No previously established Logminer Dictionary is available and a complete gather of a source system data dictionary was not found in the logstream. build() may not have been run to force the gathering of a source system data dictionary, or add_log_file() may not have been called to add all log files which contain the complete gathered system data dictionary.

Action: If build() was not employed prior to this mining session, the Logminer Ad Hoc user may elect to employ an alternate dictionary such as the current system catalog or a previously built flat file dictionary. Other Logminer clients must run build() prior to mining. If build() has been run, ensure that all logfiles which comprise the gathered system dictionary have been added. The following query, run on the system which build() was run, can be helpful in identifying the required files.

select DICTIONARY_BEGIN, DICTIONARY_END, name from v$archived_log;

Minimally a set of files starting with one which has DICTIONARY_BEGIN = 'YES' and all subsequent log files through one which has DICTIONARY_END = \qYESmustbeadded.'


ORA-01336 specified dictionary file cannot be opened

Cause: The dictionary file or directory does not exist or is inaccessible.

Action: Make sure that the dictionary file and directory exist and are accessible.


ORA-01337 log file has a different compatibility version

Cause: The logfile has a different compatibility version than the rest of the logfiles in the session.

Action: Make sure that all logfiles in the session have the same compatibility version.


ORA-01338 Other process is attached to LogMiner session

Cause: Can not do this when other process is attached to LogMiner session.


ORA-01339 logfile is too old

Cause: An attempt was made to add an already processed logfile.


ORA-01340 NLS error

Cause: Could not load NLS package.


ORA-01341 LogMiner out-of-memory

Cause: The logfiles to be analyzed in the current LogMiner session require more system resources than what is currently available.

Action: Reduce the number of logfiles to be analyzed for a given LogMiner session and try again.


ORA-01342 LogMiner can not resume session due to inability of staging checkpointed data

Cause: Logminer can not resume session because there is not enough SGA memory available to read in checkpointed data. Logminer periodically checkpoints data to enable faster crash recovery.

Action: Specify a bigger max_sga for the given LogMiner session and try again.


ORA-01344 LogMiner coordinator already attached

Cause: A coordinator process is already attached to the specified logminer context.

Action: Detach from the active coordinator session and retry the attach.


ORA-01345 Supplemental log data must be enabled to build into the logstream

Cause: Supplemental log data must be enabled on this database instance.

Action: Enable supplemental log data.


ORA-01346 Dependent LogMiner sessions relying on supplementally logged data exist

Cause: LogMiner sessions exist on this database instance which rely on the existence of supplemental log data.

Action: Destroy all LogMiner sessions on this instance which are mining log files from this same instance. Then reissue the command.


ORA-01347 Supplemental log data no longer found

Cause: The source database instance producing log files for this LogMiner session was altered to no longer log supplemental data.

Action: Destroy this Logminer session. Re-enable supplemental log data on the source system and create a new LogMiner session.


ORA-01350 must specify a tablespace name

Cause: Invocation failed to specify either a dictionary tablespace or a spill tablespace.

Action: Reformat invocation of DBMS_LOGMNR_D.SET_TABLESPACE to include the name of one or more tablespaces.

  • NEW_TABLESPACE - A string naming an existing tablespace.

    Supply only this parameter to recreate all Logminer tables to employ this tablespace.

  • DICTIONARY_TABLESPACE - A string naming an existing tablespace.

    Supply this parameter when it is desired to place Logminer Dictionary data in a tablespace different from that where Logminer spill data is to be written. This parameter overrides the new_tablespace parameter with respect to Logminer Dictionary tables.

  • SPILL_TABLESPACE - a string naming an existing tablespace.

    Supply this parameter when it is desired to place Logminer spill data in a tablespace different from that where Logminer Dictionary data is to be written. This parameter overrides the new_tablespace parameter with respect to Logminer spill tables.


ORA-01351 tablespace given for Logminer dictionary does not exist

Cause: The tablespace name given as either the NEW_TABLESPACE or the DICTIONARY_TABLESPACE parameter to DBMS_LOGMNR_D.SET_TABLESPACE does not exist.

Action: Check the spelling of the tablespace name. If the spelling is correct, then verify that the named tablespace has already been created. DBMS_LOGMNR_D.SET_TABLESPACE will not create a tablespace.


ORA-01352 tablespace given for Logminer spill does not exist

Cause: The tablespace name given as either the NEW_TABLESPACE or the SPILL_TABLESPACE parameter to DBMS_LOGMNR_D.SET_TABLESPACE does not exist.

Action: Check the spelling of the tablespace name. If the spelling is correct, then verify that the named tablespace has already been created. DBMS_LOGMNR_D.SET_TABLESPACE will not create a tablespace.


ORA-01353 existing Logminer session

Cause: An attempt was made to execute DBMS_LOGMNR_D.SET_TABLESPACE while Logminer sessions existed. In general DBMS_LOGMNR_D.SET_TABLESPACE should be run before any Logminer activity has begun. If this error occurs, then this procedure has not been followed.

Action: First cause all Logminer sessions to be destroyed. A Logminer session can exist as a result of executing DBMS_LOGMNR.START_LOGMNR or as the result of running a product such as Logical Standby or Streams which uses Logminer. Next, execute DBMS_LOGMNR_D.SET_TABLESPACE.


ORA-01370 Specified restart SCN is too old

Cause: The specified restart scn is too old and Logminer could not find a proper checkpoint.

Action: Specify a bigger restart SCN to try again.


ORA-01371 Complete LogMiner dictionary not found

Cause: One or more log files containing the LogMiner dictionary was not found.

Action: Add into LogMiner all log files containing the dictionary.


ORA-01372 Insufficient processes for specified LogMiner operation

Cause: The number of processes requested by the caller can not be allocated.

Action: Increase the number of parallel servers allocated to the instance.


ORA-01373 insufficient memory for staging persistent LogMiner session

Cause: The maximum number of concurrent persistent LogMiner sessions allowed is limited by the LOGMNR_MAX_PERSISTENT_SESSIONS parameter. Not enough memory has been set aside at instance startup to allocate the new LogMiner session.

Action: Increase LOGMNR_MAX_PERSISTENT_SESSIONS and restart the instance.


ORA-01374 LOG_PARALLELISM greater than 1 not supported in this release

Cause: LogMiner does not mine redo records generated with LOG_PARALLELISM set to a value greater than 1.


ORA-01400 cannot insert NULL into (string)

Cause: An attempt was made to insert a NULL into the column "USER"."TABLE"."COLUMN".

For example, if you enter:

connect scott/tiger 
create table a (a1 number not null); 
insert into a values (null); 

Oracle returns:

ORA-01400 cannot insert NULL into ("SCOTT"."A"."A1") :  which means you 
cannot insert NULL into "SCOTT"."A"."A1".

Action: Retry the operation with a value other than NULL.


ORA-01401 inserted value too large for column

Cause: The value entered is larger than the maximum width defined for the column.

Action: Enter a value smaller than the column width or use the MODIFY option with ALTER TABLE to expand the column width.


ORA-01402 view WITH CHECK OPTION where-clause violation

Cause: An INSERT or UPDATE statement was attempted on a view created with the CHECK OPTION. This would have resulted in the creation of a row that would not satisfy the view's WHERE clause.

Action: Examine the view's WHERE clause in the dictionary table VIEWS. If the current view does not have the CHECK OPTION, then its FROM clause must reference a second view that is defined using the CHECK OPTION. The second view's WHERE clause must also be satisfied by any INSERT or UPDATE statements. To insert the row, it may be necessary to insert it directly into the underlying table, rather than through the view.


ORA-01403 no data found

Cause: In a host language program, all records have been fetched. The return code from the fetch was +4, indicating that all records have been returned from the SQL query.

Action: Terminate processing for the SELECT statement.


ORA-01404 ALTER COLUMN will make an index too large

Cause: Increasing the length of a column would cause the combined length of the columns specified in a previous CREATE INDEX statement to exceed the maximum index length (255). The total index length is computed as the sum of the width of all indexed columns plus the number of indexed columns. Date fields are calculated as a length of 7, character fields are calculated at their defined width, and numeric fields are length 22.

Action: The only way to alter the column is to drop the affected index. The index cannot be re-created if to do so would exceed the maximum index width.


ORA-01405 fetched column value is NULL

Cause: The INTO clause of a FETCH operation contained a NULL value, and no indicator was used. The column buffer in the program remained unchanged, and the cursor return code was +2. This is an error unless you are running Oracle with DBMS=6, emulating version 6, in which case it is only a warning.

Action: You may do any of the following:

  • Use the NVL function to convert the retrieved NULL to another value, such as zero or blank. This is the simplest solution.
  • Use an indicator to record the presence of the NULL. You probably should use this option when you want a specific action to be taken when a NULL arises.
  • Revise the cursor definition so that no columns possibly containing NULL values are retrieved.

ORA-01406 fetched column value was truncated

Cause: In a host language program, a FETCH operation was forced to truncate a character string. The program buffer area for this column was not large enough to contain the entire string. The cursor return code from the fetch was +3.

Action: Increase the column buffer area to hold the largest column value or perform other appropriate processing.


ORA-01407 cannot update (string) to NULL

Cause: An attempt was made to update a table column "USER"."TABLE"."COLUMN" with a NULL value.

For example, if you enter:

connect scott/tiger 
update table a (a1 number not null); 
insert into a values (null); 

Oracle returns:

ORA-01407 cannot update ("SCOTT"."A"."A1") to NULL

which means you cannot update the column "SCOTT"."A"."A1" to NULL.

Action: Retry the operation with a value other than NULL.


ORA-01408 such column list already indexed

Cause: A CREATE INDEX statement specified a column that is already indexed. A single column may be indexed only once. Additional indexes may be created on the column if it is used as a portion of a concatenated index, that is, if the index consists of multiple columns.

Action: Do not attempt to re-index the column, as it is unnecessary. To create a concatenated key, specify one or more additional columns in the CREATE INDEX statement.


ORA-01409 NOSORT option may not be used; rows are not in ascending order

Cause: Creation of index with NOSORT option when rows were not ascending. The NOSORT option may only be used for indexes on groups of rows that already are in ascending order.

For non-unique indexes the ROWID is considered part of the index key. This means that two rows that appear to be stored in ascending order may not be. If you create an index NOSORT, and two of the rows in the table have the same index values, but get split across two extents, the data block address of the first block in the second extent can be less than the data block address of the last block in the first extent. If these addresses are not in ascending order, the ROWIDs are not either. Since these ROWIDs are considered part of the index key, the index key is not in ascending order, and the create index NOSORT fails.

Action: Create the index without the NOSORT option or ensure that the table is stored in one extent.


ORA-01410 invalid ROWID

Cause: A ROWID was entered incorrectly. ROWIDs must be entered as formatted hexadecimal strings using only numbers and the characters A through F. A typical ROWID format is '000001F8.0001.0006'.

Action: Check the format, then enter the ROWID using the correct format. ROWID format: block ID, row in block, file ID.


ORA-01411 cannot store the length of column in the indicator

Cause: An attempt was made to fetch a column of size more than 64K and could not store the length of the column in the given indicator of size 2 bytes.

Action: Use the new bind type with call backs to fetch the long column.


ORA-01412 zero length not allowed for this datatype

Cause: The length for type 97 is 0.

Action: Specify the correct length.


ORA-01413 illegal value in packed decimal number buffer

Cause: The user buffer bound by the user as packed decimal number contained an illegal value.

Action: Use a legal value.


ORA-01414 invalid array length when trying to bind array

Cause: An attempt was made to bind an array without either a current array length pointer or a zero maximum array length.

Action: Specify a valid length.


ORA-01415 too many distinct aggregate functions

Cause: The query contains more distinct aggregates than can be processed. The current limit is 255.

Action: Reduce the number of distinct aggregate functions in the query.


ORA-01416 two tables cannot be outer-joined to each other

Cause: Two tables in a join operation specified an outer join with respect to each other. If an outer join is specified on one of the tables in a join condition, it may not be specified on the other table.

Action: Remove the outer join specification (+) from one of the tables, then retry the operation.


ORA-01417 a table may be outer joined to at most one other table

Cause: a.b (+) = b.b and a.c (+) = c.c is not allowed.

Action: Check that this is really what you want, then join b and c first in a view.


ORA-01418 specified index does not exist

Cause: An ALTER INDEX, DROP INDEX, or VALIDATE INDEX statement specified the name of an index that does not exist. Only existing indexes can be altered, dropped, or validated. Existing indexes may be listed by querying the data dictionary.

Action: Specify the name of an existing index in the ALTER INDEX, DROP INDEX, or VALIDATE INDEX statement.


ORA-01419 datdts: illegal format code

Cause: An attempt was made to use an incorrect format.

Action: Inspect the format, correct it if necessary, then retry the operation.


ORA-01420 datstd: illegal format code

Cause: An attempt was made to use an invalid format.

Action: Inspect the format, correct it if necessary, then retry the operation.


ORA-01421 datrnd/dattrn: illegal precision specifier

Cause: An attempt was made to use an invalid precision specifier.

Action: Inspect the precision specifier, correct it if necessary, then retry the operation.


ORA-01422 exact fetch returns more than requested number of rows

Cause: The number specified in exact fetch is less than the rows returned.

Action: Rewrite the query or change number of rows requested.


ORA-01423 error encountered while checking for extra rows in exact fetch

Cause: An error was encountered during the execution of an exact fetch. This message will be followed by more descriptive messages.

Action: See the accompanying messages and take appropriate action.


ORA-01424 missing or illegal character following the escape character

Cause: The character following the escape character in LIKE pattern is missing or not one of the escape character, '%', or '_'.

Action: Remove the escape character or specify the missing character.


ORA-01425 escape character must be character string of length 1

Cause: Given escape character for LIKE is not a character string of length 1.

Action: Change it to a character string of length 1.


ORA-01426 numeric overflow

Cause: Evaluation of an value expression causes an overflow/underflow.

Action: Reduce the operands.


ORA-01427 single-row subquery returns more than one row

Cause: The outer query must use one of the keywords ANY, ALL, IN, or NOT IN to specify values to compare because the subquery returned more than one row.

Action: Use ANY, ALL, IN, or NOT IN to specify which values to compare or reword the query so only one row is retrieved.


ORA-01428 argument 'string' is out of range

Cause: An illegal value for a mathematical function argument was specified. For example

SELECT SQRT(-1) "Square Root" FROM DUAL; 

Action: See the Oracle9i SQL Reference for valid input and ranges of the mathematical functions.


ORA-01429 Index-Organized Table: no data segment to store overflow row-pieces

Cause: No overflow segment defined.

Action: Add overflow segment.


ORA-01430 column being added already exists in table

Cause: An ALTER TABLE ADD statement specified the name of a column that is already in the table. All column names must be unique within a table.

Action: Specify a unique name for the new column, then re-execute the statement.


ORA-01431 internal inconsistency in GRANT command

Cause: An internal error occurred while attempting to execute a GRANT statement.

Action: Contact Oracle Support Services.


ORA-01432 public synonym to be dropped does not exist

Cause: The synonym specified in DROP PUBLIC SYNONYM is not a valid public synonym. It may be a private synonym.

Action: Correct the synonym name or use DROP SYNONYM if the synonym is not public.


ORA-01433 synonym to be created is already defined

Cause: A CREATE SYNONYM statement specified a synonym name that is the same as an existing synonym, table, view, or cluster. Synonyms may not have the same name as any other synonym, table, view, or cluster available to the user creating the synonym.

Action: Specify a unique name for the synonym, then re-execute the statement.


ORA-01434 private synonym to be dropped does not exist

Cause: A DROP SYNONYM statement specified a synonym that does not exist. Existing synonym names may be listed by querying the data dictionary.

Action: Specify the name of an existing synonym in the DROP SYNONYM statement.


ORA-01435 user does not exist

Cause: This message is caused by any reference to a non-existent user. For example, it occurs if a SELECT, GRANT, or REVOKE statement specifies a username that does not exist. Only a GRANT CONNECT statement may specify a new username. All other GRANT and REVOKE statements must specify existing usernames. If specified in a SELECT statement, usernames must already exist.

Action: Specify only existing usernames in the SELECT, GRANT, or REVOKE statement or ask the database administrator to define the new username.


ORA-01436 CONNECT BY loop in user data

Cause: The condition specified in a CONNECT BY clause caused a loop in the query, where the next record to be selected is a descendent of itself. When this happens, there can be no end to the query.

Action: Check the CONNECT BY clause and remove the circular reference.


ORA-01437 cannot have join with CONNECT BY

Cause: A join operation was specified with a CONNECT BY clause. If a CONNECT BY clause is used in a SELECT statement for a tree-structured query, only one table may be referenced in the query.

Action: Remove either the CONNECT BY clause or the join operation from the SQL statement.


ORA-01438 value larger than specified precision allows for this column

Cause: When inserting or updating records, a numeric value was entered that exceeded the precision defined for the column.

Action: Enter a value that complies with the numeric column's precision, or use the MODIFY option with the ALTER TABLE command to expand the precision.


ORA-01439 column to be modified must be empty to change datatype

Cause: An ALTER TABLE MODIFY statement attempted to change the datatype of a column containing data. A column whose datatype is to be altered must contain only NULL values.

Action: To alter the datatype, first set all values in the column to NULL.


ORA-01440 column to be modified must be empty to decrease precision or scale

Cause: An ALTER TABLE MODIFY statement attempted to decrease the scale or precision of a numeric column containing data. In order to decrease either of these values, the column must contain only NULL values. An attempt to increase the scale without also increasing the precision will also cause this message.

Action: Set all values in the column to NULL before decreasing the numeric precision or scale. If attempting to increase the scale, increase the precision in accordance with the scale or set all values in the column to NULL first.


ORA-01441 cannot decrease column length because some value is too big

Cause: An ALTER TABLE MODIFY statement attempted to decrease the size of a character field containing data. A column whose maximum size is to be decreased must contain only NULL values.

Action: Set all values in column to NULL before decreasing the maximum size.


ORA-01442 column to be modified to NOT NULL is already NOT NULL

Cause: An ALTER TABLE MODIFY statement attempted to change a column specification unnecessarily, from NOT NULL to NOT NULL.

Action: No action required.


ORA-01443 internal inconsistency; illegal datatype in resultant view column

Cause: An internal error occurred in referencing a view.

Action: Contact Oracle Support Services.


ORA-01444 internal inconsistency; internal datatype maps to invalid external type

Cause: This is an internal error message not normally issued.

Action: Contact Oracle Support Services.


ORA-01445 cannot select ROWID from a join view without a key-preserved table

Cause: A SELECT statement attempted to select ROWIDs from a view derived from a join operation. Because the rows selected in the view do not correspond to underlying physical records, no ROWIDs can be returned.

Action: Remove ROWID from the view selection clause, then re-execute the statement.


ORA-01446 cannot select ROWID from view with DISTINCT, GROUP BY, etc.

Cause: A SELECT statement attempted to select ROWIDs from a view containing columns derived from functions or expressions. Because the rows selected in the view do not correspond to underlying physical records, no ROWIDs can be returned.

Action: Remove ROWID from the view selection clause, then re-execute the statement.


ORA-01447 ALTER TABLE does not operate on clustered columns

Cause: An ALTER TABLE MODIFY statement specified a column used to cluster the table. Clustered columns may not be altered.

Action: To alter the column, first re-create the table in non-clustered form. The column's size can be increased at the same time.


ORA-01448 index must be dropped before changing to desired type

Cause: An ALTER TABLE MODIFY statement attempted to change an indexed character column to a LONG column. Columns with the datatype LONG may not be indexed, so the index must be dropped before the modification.

Action: Drop all indexes referencing the column before changing its datatype to LONG.


ORA-01449 column contains NULL values; cannot alter to NOT NULL

Cause: An ALTER TABLE MODIFY statement attempted to change the definition of a column containing NULL values to NOT NULL. The column may not currently contain any NULL values if it is to be altered to NOT NULL.

Action: Set all NULL values in the column to values other than NULL before ALTERING the column to NOT NULL.


ORA-01450 maximum key length (string) exceeded

Cause: The combined length of all the columns specified in a CREATE INDEX statement exceeded the maximum index length. The maximum index length varies by operating system. The total index length is computed as the sum of the width of all indexed columns plus the number of indexed columns. Date fields have a length of 7, character fields have their defined length, and numeric fields have a length of 22. Numeric length = (precision/2) + 1. If negative, add +1.

Action: Select columns to be indexed so the total index length does not exceed the maximum index length for the operating system. See also your operating system-specific Oracle documentation.


ORA-01451 column to be modified to NULL cannot be modified to NULL

Cause: The column may already allow NULL values, the NOT NULL constraint is part of a primary key or check constraint, or an ALTER TABLE MODIFY statement attempted to change a column specification unnecessarily, from NULL to NULL.

Action: If a primary key or check constraint is enforcing the NOT NULL constraint, then drop that constraint.


ORA-01452 cannot CREATE UNIQUE INDEX; duplicate keys found

Cause: A CREATE UNIQUE INDEX statement specified one or more columns that currently contain duplicate values. All values in the indexed columns must be unique by row to create a UNIQUE INDEX.

Action: If the entries need not be unique, remove the keyword UNIQUE from the CREATE INDEX statement, then re-execute the statement. If the entries must be unique, as in a primary key, then remove duplicate values before creating the UNIQUE index.


ORA-01453 SET TRANSACTION must be first statement of transaction

Cause: A transaction was not processed properly because the SET TRANSACTION statement was not the first statement.

Action: Commit or roll back the current transaction before using the statement SET TRANSACTION.


ORA-01454 cannot convert column into numeric datatype

Cause: A non-numeric value could not be converted into a number value.

Action: Check the value to make sure it contains only numbers, a sign, a decimal point, and the character "E" or "e", then retry the operation.


ORA-01455 converting column overflows integer datatype

Cause: The converted form of the specified expression was too large for the specified datatype.

Action: Define a larger datatype or correct the data.


ORA-01456 may not perform insert/delete/update operation inside a READ ONLY transaction

Cause: A non-DDL insert/delete/update or select for update operation was attempted.

Action: Commit (or roll back) the transaction, and then re-execute.


ORA-01457 converting column overflows decimal datatype

Cause: The converted form of the specified expression was too large for the specified type. The problem also occurs in COBOL programs when using COMP-3 in the picture clause, which is acceptable to the Pro*COBOL Precompiler and to COBOL but results in this error.

Action: Define a larger datatype or correct the data.


ORA-01458 invalid length inside variable character string

Cause: An attempt was made to bind or define a variable character string with a buffer length less than the minimum requirement.

Action: Increase the buffer size or use a different type.


ORA-01459 invalid length for variable character string

Cause: The buffer length was less than the minimum required or greater than its length at bind time minus two bytes.

Action: Make sure the string size is long enough to hold the buffer.


ORA-01460 unimplemented or unreasonable conversion requested

Cause: The requested format conversion is not supported.

Action: Remove the requested conversion from the SQL statement. Check the syntax for the TO_CHAR, TO_DATE, and TO_NUMBER functions to see which conversions are supported.


ORA-01461 can bind a LONG value only for insert into a LONG column

Cause: An attempt was made to insert a value from a LONG datatype into another datatype. This is not allowed.

Action: Do not try to insert LONG datatypes into other types of columns.


ORA-01462 cannot insert string literals longer than 2000 characters

Cause: The longest literal supported by Oracle consists of 2000 characters.

Action: Reduce the number of characters in the literal to 2000 characters or fewer or use the VARCHAR2 or LONG datatype to insert strings exceeding 2000 characters.


ORA-01463 cannot modify column datatype with current constraint(s)

Cause: An attempt was made to modify the datatype of column which has referential constraints; or has check constraints which only allows changing the datatype from CHAR to VARCHAR or vise versa.

Action: Remove the constraint(s) or do not perform the offending operation.


ORA-01464 circular grant (granting to grant ancestor) of table or view

Cause: The user in the TO clause of the GRANT statement has already been GRANTed privileges on this table.

Action: Do not GRANT privileges on a table to the user who originally GRANTed privileges on that table. The statement in error is probably unnecessary.


ORA-01465 invalid hex number

Cause: In an UPDATE statement following a SELECT FOR UPDATE, part of the ROWID contains invalid characters. ROWID must be expressed in the proper and expected format for ROWID and within quotes.

Action: Enter the ROWID just as it was returned in the SELECT FOR UPDATE.


ORA-01466 unable to read data - table definition has changed

Cause: This is a time-based read consistency error for a database object, such as a table or index. Either of the following may have happened:

  • The query was parsed and executed with a materialized view older than the time the object was changed.
  • The creation time-stamp of the object is greater than the current system time. This happens, for example, when the system time is set to a time earlier than the creation time of the object.

Action: If the cause is:

  • an old snapshot, then commit or rollback the transaction and resume work.
  • a creation time-stamp in the future, ensure the system time is set correctly.

If the object creation time-stamp is still greater than the system time, then export the object's data, drop the object, re-create the object so it has a new creation time-stamp, import the object's data, and resume work.


ORA-01467 sort key too long

Cause: A DISTINCT, GROUP BY, ORDER BY, or SET operation requires a sort key longer than that supported by Oracle. Either too many columns or too many group functions were specified in the SELECT statement.

Action: Reduce the number of columns or group functions involved in the operation.


ORA-01468 a predicate may reference only one outer-joined table

Cause: A predicate in the WHERE clause has two columns from different tables with "(+)".

Action: Change the WHERE clause so that each predicate has a maximum of one outer-join table.


ORA-01469 PRIOR can only be followed by a column name

Cause: An invalid column name was specified after the PRIOR keyword.

Action: Check syntax, spelling, use a valid column name, and try again.


ORA-01470 In-list iteration does not support mixed operators

Cause: Constants of different types are specified in an in-list.

Action: Use constants of same type for in-lists.


ORA-01471 cannot create a synonym with same name as object

Cause: An attempt was made to create a private synonym with the same name as the object to which it refers. This error typically occurs when a user attempts to create a private synonym with the same name as one of their objects.

Action: Choose a different synonym name or create the synonym under a different username.


ORA-01472 cannot use CONNECT BY on view with DISTINCT, GROUP BY, etc.

Cause: CONNECT BY cannot be used on a view where there is not a correspondence between output rows and rows of the underlying table.

Action: Remove the DISTINCT or GROUP BY from the view or move the CONNECT BY clause into the view.


ORA-01473 cannot have subqueries in CONNECT BY clause

Cause: Subqueries cannot be used in a CONNECT BY clause.

Action: Remove the subquery or move it to the WHERE clause.


ORA-01474 cannot have START WITH or PRIOR without CONNECT BY

Cause: START WITH and PRIOR are meaningful only in connection with CONNECT BY.

Action: Check the syntax for the SQL statement and add a CONNECT BY clause, if necessary.


ORA-01475 must reparse cursor to change bind variable datatype

Cause: After executing a statement, an attempt was made to rebind a bind variable with a datatype different from that of the original bind.

Action: Re-parse the cursor before rebinding with a different datatype.


ORA-01476 divisor is equal to zero

Cause: An expression attempted to divide by zero.

Action: Correct the expression, then retry the operation.


ORA-01477 user data area descriptor is too large

Cause: This is an internal error message not normally issued.

Action: Contact Oracle Support Services.


ORA-01478 array bind may not include any LONG columns

Cause: User is performing an array bind with a bind variable whose maximum size is greater than 2000 bytes.

Action: Such bind variables cannot participate in array binds. Use an ordinary bind operation instead.


ORA-01479 last character in the buffer is not Null

Cause: A bind variable of type 97 does not contain null at the last position.

Action: Make the last character null.


ORA-01480 trailing null missing from STR bind value

Cause: A bind variable of type 5 (null-terminated string) does not contain the terminating null in its buffer.

Action: Terminate the string with a null character.


ORA-01481 invalid number format model

Cause: An invalid format parameter was used with the TO_CHAR or TO_NUMBER function.

Action: Correct the syntax, then retry the operation.


ORA-01482 unsupported character set

Cause: The character set used to perform the operation, such as the CONVERT function, is not a supported character set.

Action: Use one of the supported character sets.


kkORA-01484 arrays can only be bound to PL/SQL statements

Cause: At attempt was made to bind an array to a non-PL/SQL statement.

Action: Rewrite the offending code being careful to bind arrays only to PL/SQL statements.


ORA-01485 compile bind length different from execute bind length

Cause: You bound a buffer of type DTYVCS (VARCHAR with the two byte length in front) and at execute time the length in the first two bytes is more than the maximum buffer length, given in the bind call. The number of elements in the array and the current number of elements in the array cannot be more than the maximum size of the array.

Action: Ensure that the buffer size is sufficiently large to contain the array plus two bytes for the buffer length.


ORA-01486 size of array element is too large

Cause: An attempt was made to bind a data value that was either too large for the datatype, for example, NUMBER, or was greater than 2000 bytes, for example, VARCHAR or LONG.

Action: Find a way to convert or truncate the data value so that its length is acceptable.


ORA-01487 packed decimal number too large for supplied buffer

Cause: A conversion request cannot be performed because the buffer is too small to hold the result.

Action: Increase the size of the buffer.


ORA-01488 invalid nibble or byte in the input data

Cause: A conversion request cannot be performed because a digit was invalid.

Action: Fix the number and retry.


ORA-01489 result of string concatenation is too long

Cause: String concatenation result is more than the maximum size.

Action: Make sure that the result is less than the maximum size.


ORA-01490 invalid ANALYZE command

Cause: The syntax of the ANALYZE command was incorrect.

Action: Check the syntax and enter the command using the correct syntax.


ORA-01491 CASCADE option not valid

Cause: The CASCADE option should be used only for tables or clusters.

Action: Do not use the CASCADE option in this manner. Check the syntax of the statement and then retry.


ORA-01492 LIST option not valid

Cause: The LIST option can be used only for tables or clusters.

Action: Do not use the LIST option in this manner. Check the syntax of the statement and then retry.


ORA-01493 invalid SAMPLE size specified

Cause: The specified SAMPLE size is out of range

Action: Specify a value within the proper range.


ORA-01494 invalid SIZE specified

Cause: The specified histogram SIZE value was out of range.

Action: Specify a value within the proper range.


ORA-01495 specified chain row table not found

Cause: The specified table either does not exist or user does not have the proper privileges.

Action: Specify the correct table to use.


ORA-01496 specified chain row table form incorrect

Cause: The specified table does not have the proper field definitions.

Action: Specify the correct table to use.


ORA-01497 illegal option for ANALYZE CLUSTER

Cause: The FOR COLUMNS column_list clause cannot be used with ANALYZE CLUSTER.

Action: Retry with a legal syntax.

For more information about ANALYZE CLUSTER, see the Oracle9i SQL Reference.


ORA-01498 block check failure - see trace file

Cause: An error occurred while checking a block with the ANALYZE command.

Action: Check the trace file for more descriptive messages about the problem. Correct these errors. The name of the trace file is operating system-specific, for example, ORAxxxx.TRC. It is found in the directory specified by the initialization parameter USER_DUMP_DEST. If USER_DUMP_DEST is not set, trace files are not created. It may be necessary to re-create the object. See also your operating system-specific Oracle documentation.


ORA-01499 table/index cross reference failure - see trace file

Cause: An error occurred when validating an index or a table using the ANALYZE command. One or more entries does not point to the appropriate cross-reference.

Action: Check the trace file for more descriptive messages about the problem. Correct these errors. The name of the trace file is operating system-specific, for example, ORAxxxx.TRC. It is found in the directory specified by the USER_DUMP_DEST initialization parameter. If USER_DUMP_DEST is not set, trace files are not created. It may be necessary to re-create the object. See also your operating system-specific Oracle documentation.


Go to previous page Go to next page
Oracle
Copyright © 1996, 2002 Oracle Corporation.

All Rights Reserved.
Go To Documentation Library
Home
Go To Product List
Book List
Go To Table Of Contents
Contents
Go To Index
Index

Master Index

Feedback