Oracle^{®} Spatial User's Guide and Reference Release 9.2 Part No. A9663001 

Linear referencing is a natural and convenient means to associate attributes or events to locations or portions of a linear feature. It has been widely used in transportation applications (such as for highways, railroads, and transit routes) and utilities applications (such as for gas and oil pipelines). The major advantage of linear referencing is its capability of locating attributes and events along a linear feature with only one parameter (usually known as measure) instead of two (such as latitude/longitude or x/y in Cartesian space). Sections of a linear feature can be referenced and created dynamically by indicating the start and end locations along the feature without explicitly storing them.
The linear referencing system (LRS) application programming interface (API) in Oracle Spatial provides serverside LRS capabilities at the cartographic level. The linear measure information is directly integrated into the Oracle Spatial geometry structure. The Oracle Spatial LRS API provides support for dynamic segmentation, and it serves as a groundwork for thirdparty or middletier application development virtually for any linear referencing methods and models in any coordinate systems.
For an example of LRS, see Section 6.6. However, you may want to read the rest of this chapter first, to understand the concepts that the example illustrates.
For reference information about LRS functions, see Chapter 14.
If you have LRS data from a previous release of Spatial, see Section A.5 for information about migrating LRS data.
This section explains important terms and concepts related to linear referencing support in Oracle Spatial.
Geometric segments are basic LRS elements in Oracle Spatial. A geometric segment can be any of the following:
Line string: an ordered, nonbranching, and continuous geometry (for example, a simple road)
Multiline string: nonconnected line strings (for example, a highway with a gap caused by a lake or a bypass road)
Polygon (for example, a racetrack or a scenic tour route that starts and ends at the same point)
A geometric segment must contain at least start and end measures for its start and end points. Measures of points of interest (such as highway exits) on the geometric segments can also be assigned. These measures are either assigned by users or derived from existing geometric segments. Figure 61 shows a geometric segment with four line segments and one arc. Points on the geometric segment are represented by triplets (x, y, m), where x and y describe the location and m denotes the measure (with each measure value underlined in Figure 61).
Figure 61 Geometric Segment
Shape points are points that are specified when an LRS segment is constructed, and that are assigned measure information. In Oracle Spatial, a line segment is represented by its start and end points, and an arc is represented by three points: start, middle, and end points of the arc. You must specify these points as shape points, but you can also specify other points as shape points if you need measure information stored for these points (for example, an exit in the middle of a straight part of the highway).
Thus, shape points can serve one or both of the following purposes: to indicate the direction of the segment (for example, a turn or curve), and to identify a point of interest for which measure information is to be stored.
Shape points might not directly relate to mileposts or reference posts in LRS; they are used as internal reference points. The measure information of shape points is automatically populated when you define the LRS segment using the SDO_LRS.DEFINE_GEOM_SEGMENT procedure.
The direction of a geometric segment is indicated from the start point of the geometric segment to the end point. The direction is determined by the order of the vertices (from start point to end point) in the geometry definition. Measures of points on a geometric segment always either increase or decrease along the direction of the geometric segment.
The measure of a point along a geometric segment is the linear distance (in the measure dimension) measured from the start point (for increasing values) or end point (for decreasing values) of the geometric segment. The measure information does not necessarily have to be of the same scale as their distance. However, the linear mapping relationship between measure and distance is always preserved.
Some LRS functions use offset instead of measure to represent measured distance along linear features. Although some other linear referencing systems might use offset to mean what the Oracle Spatial LRS refers to as measure, offset has a different meaning in Oracle Spatial from measure, as explained in Section 6.1.5.
The offset of a point along a geometric segment is the perpendicular distance between the point and the geometric segment. Offsets are positive if points are on the left side along the segment direction and are negative if they are on the right side. Points are on a geometric segment if their offsets to the segment are zero.
The unit of measurement for an offset is the same as for the coordinate system associated with the geometric segment. For geodetic data, the default unit of measurement is meters.
Figure 62 shows how a point can be located along a geometric segment with measure and offset information. By assigning an offset together with a measure, it is possible to locate not only points that are on the geometric segment, but also points that are perpendicular to the geometric segment.
Figure 62 Describing a Point Along a Segment with a Measure and an Offset
Any unassigned measures of a geometric segment are automatically populated based upon their distance distribution. This is done before any LRS operations for geometric segments with unknown measures (NULL in Oracle Spatial). The resulting geometric segments from any LRS operations return the measure information associated with geometric segments. The measure of a point on the geometric segment can be obtained based upon a linear mapping relationship between its previous and next known measures or locations. See the algorithm representation in Figure 63 and the example in Figure 64.
Figure 63 Measures, Distances, and Their Mapping Relationship
Figure 64 Measure Populating of a Geometric Segment
Measures are evenly spaced between assigned measures. However, the assigned measures for points of interest on a geometric segment do not need to be evenly spaced. This could eliminate the problem of error accumulation and account for inaccuracy of data source.
Moreover, the assigned measures do not even need to reflect actual distances (for example, they can reflect estimated driving time); they can be any valid values within the measure range. Figure 65 shows the measure population that results when assigned measure values are not proportional and reflect widely varying gaps.
Figure 65 Measure Populating With Disproportional Assigned Measures
In all cases, measure populating is done in an incremental fashion along the segment direction. This improves the performance of current and subsequent LRS operations.
The start and end measures of a geometric segment define the linear measure range of the geometric segment. Any valid LRS measures of a geometric segment must fall within its linear measure range.
The projection of a point along a geometric segment is the point on the geometric segment with the minimum distance to the point. The measure information of the resulting point is also returned in the point geometry.
LRS points are points with linear measure information along a geometric segment. A valid LRS point is a point geometry with measure information.
All LRS point data must be stored in the SDO_ELEM_INFO_ARRAY and SDO_ORDINATE_ARRAY, and cannot be stored in the SDO_POINT field in the SDO_GEOMETRY definition of the point.
Linear features are any spatial objects that can be treated as a logical set of linear segments. Examples of linear features are highways in transportation applications and pipelines in utility industry applications. The relationship of linear features, geometric segments, and LRS points is shown in Figure 66.
Figure 66 Linear Feature, Geometric Segments, and LRS Points
The Oracle Spatial LRS data model incorporates measure information into its geometry representation at the point level. The measure information is directly integrated into the Oracle Spatial model. To accomplish this, an additional measure dimension must be added to the Oracle Spatial metadata.
Oracle Spatial LRS support affects the Spatial metadata and data (the geometries). Example 61 shows how a measure dimension can be added to twodimensional geometries in the Spatial metadata. The measure dimension must be the last element of the SDO_DIM_ARRAY in a spatial object definition (shown in bold in Example 61).
Example 61 Including LRS Measure Dimension in Spatial Metadata
INSERT INTO user_sdo_geom_metadata VALUES( 'LRS_ROUTES', 'GEOMETRY', MDSYS.SDO_DIM_ARRAY ( MDSYS.SDO_DIM_ELEMENT('X', 0, 100, 0.005), MDSYS.SDO_DIM_ELEMENT('Y', 0, 100, 0.005), MDSYS.SDO_DIM_ELEMENT('M', 0, 100, 0.005)), NULL);
After adding the new measure dimension, geometries with measure information such as geometric segments and LRS points can be represented. An example of creating a geometric segment with three line segments is shown in Figure 67.
Figure 67 Creating a Geometric Segment
In Figure 67, the geometric segment has the following definition (with measure values underlined):
SDO_GEOMETRY(3302, NULL, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1,2,1), MDSYS.SDO_ORDINATE_ARRAY(5,10,0, 20,5,NULL, 35,10,NULL, 55,10,100))
Whenever a geometric segment is defined, its start and end measures must be defined or derived from some existing geometric segment. The unsigned measures of all shape points on a geometric segment will be automatically populated.
The LRS API works with geometries in formats of Oracle Spatial before release 8.1.6, but the resulting geometries will be converted to the Oracle Spatial release 8.1.6 or higher format, specifically with 4digit SDO_GTYPE and SDO_ETYPE values. For example, in Oracle Spatial release 8.1.6 and higher, the geometry type (SDO_GTYPE) of a spatial object includes the number of dimensions of the object as the first digit of the SDO_GTYPE value. Thus, the SDO_GTYPE value of a point is 1 in the prerelease 8.1.6 format but 2001 in the release 8.1.6 format (the number of dimensions of the point is 2). However, an LRS point (which includes measure information) has three dimensions, and thus the SDO_GTYPE of any point geometry used with an LRS function must be 3301.
If LRS data is indexed using a spatial quadtree index, only the first two dimensions are indexed; the measure dimension and its values are not indexed.
If LRS data has four dimensions (three plus the M dimension) and if you need to index all three nonmeasure dimensions, you must use a spatial Rtree index to index the data, and you must specify PARAMETERS('sdo_indx_dims=3') in the CREATE INDEX statement to ensure that the first three dimensions are indexed. Note, however, that if you specify an sdo_indx_dims value of 3 or higher, the only Spatial operator that can be used on the indexed geometries is SDO_FILTER; the other operators described in Chapter 10 cannot be used. (The default value for the sdo_indx_dims keyword is 2, which would cause only the first two dimensions to be indexed.) For example, if the dimensions are X, Y, Z, and M, specify sdo_indx_dims=3 to index the X, Y, and Z dimensions, but not the measure (M) dimension. Do not include the measure dimension in a spatial index, because this causes additional processing overhead and produces no benefit.
Information about the CREATE INDEX statement and its parameters and keywords is in Chapter 8.
Most LRS functions have formats that end in _3D: for example, DEFINE_GEOM_SEGMENT_3D, CLIP_GEOM_SEGMENT_3D, FIND_MEASURE_3D, and LOCATE_PT_3D. If a function has a 3D format, it is identified in the Usage Notes for the function in Chapter 14.
The 3D formats should be used only when the geometry object has four dimensions and the fourth dimension is the measure (for example, X, Y, Z, and M), and only when you want the function to consider the first three dimensions (for example, X, Y, and Z). If the standard format of a function (that is, without the _3D) is used on a geometry with four dimensions, the function considers only the first two dimensions (for example, X and Y).
For example, the following format considers the X, Y, and Z dimensions of the specified GEOM object in performing the clip operation:
SELECT SDO_LRS.CLIP_GEOM_SEGMENT_3D(a.geom, m.diminfo, 5, 10) FROM routes r, user_sdo_geom_metadata m WHERE m.table_name = 'ROUTES' AND m.column_name = 'GEOM' AND r.route_id = 1;
However, the following format considers only the X and Y dimensions, and ignores the Z dimension, of the specified GEOM object in performing the clip operation:
SELECT SDO_LRS.CLIP_GEOM_SEGMENT(a.geom, m.diminfo, 5, 10) FROM routes r, user_sdo_geom_metadata m WHERE m.table_name = 'ROUTES' AND m.column_name = 'GEOM' AND r.route_id = 1;
The parameters for the standard and 3D formats of any function are the same, and the usage notes apply to both formats.
The 3D formats are not supported with geodetic data.
This section describes several linear referencing operations supported by the Oracle Spatial LRS API.
There are two ways to create a geometric segment with measure information:
Construct a geometric segment and assign measures explicitly.
Define a geometric segment with specified start and end, and/or any other measures, in an ascending or descending order. Measures of shape points with unknown (unassigned) measures (null values) in the geometric segment will be automatically populated according to their locations and distance distribution.
Figure 68 shows different ways of defining a geometric segment.
Figure 68 Defining a Geometric Segment
An LRS segment must be defined (or must already exist) before any LRS operations can proceed. That is, the start, end, and any other assigned measures must be present to derive the location from a specified measure. The measure information of intermediate shape points will automatically be populated if they are not assigned.
You can redefine a geometric segment to replace the existing measures of all shape points between the start and end point with automatically calculated measures. Redefining a segment can be useful if errors have been made in one or more explicit measure assignments, and you want to start over with proportionally assigned measures.
Figure 69 shows the redefinition of a segment where the existing (before) assigned measure values are not proportional and reflect widely varying gaps.
Figure 69 Redefining a Geometric Segment
After the segment redefinition in Figure 69, the populated measures reflect proportional distances along the segment.
You can clip a geometric segment to create a new geometric segment out of an existing geometric segment (Figure 610, part a).
Figure 610 Clipping, Splitting, and Concatenating Geometric Segments
You can create two new geometric segments by splitting a geometric segment (Figure 610, part b).
Note: In Figure 610 and several that follow, small gaps between segments are used in illustrations of segment splitting and concatenation. Each gap simply reinforces the fact that two different segments are involved. However, the two segments (such as segment 1 and segment 2 in Figure 610, parts b and c) are actually connected. The tolerance (see Section 1.5.5) is considered in determining whether or not segments are connected. 
You can create a new geometric segment by concatenating two geometric segments (Figure 610, part c). Note that the geometric segments do not need to be spatially connected, although they are connected in the illustration in Figure 610, part c. The measures of the second geometric segment are shifted so that the end measure of the first segment is the same as the start measure of the second segment.
Measure assignments for the clipping, splitting, and concatenating operations in Figure 610 are shown in Figure 611. Measure information and segment direction are preserved in a consistent manner. The assignment is done automatically when the operations have completed.
Figure 611 Measure Assignment in Geometric Segment Operations
The direction of the geometric segment resulting from concatenation is always the direction of the first segment (geom_segment1 in the call to the SDO_LRS.CONCATENATE_GEOM_SEGMENTS function), as shown in Figure 612.
Figure 612 Segment Direction with Concatenation
In addition to explicitly concatenating two connected segments using the SDO_LRS.CONCATENATE_GEOM_SEGMENTS function, you can perform aggregate concatenation: that is, you can concatenate all connected geometric segments in a column (layer) using the SDO_AGGR_LRS_CONCAT spatial aggregate function. (See the description and example of the SDO_AGGR_LRS_CONCAT spatial aggregate function in Chapter 12.)
You can create a new geometric segment by performing a linear scaling operation on a geometric segment. Figure 613 shows the mapping relationship for geometric segment scaling.
Figure 613 Scaling a Geometric Segment
In general, scaling a geometric segment only involves rearranging measures of the newly created geometric segment. However, if the scaling factor is negative, the order of the shape points needs to be reversed so that measures will increase along the geometric segment's direction (which is defined by the order of the shape points).
A scale operation can perform any combination of the following operations:
Translating (shifting) measure information. (For example, add the same value to Ms and Me to get M's and M'e.)
Reversing measure information. (Let M's = Me, M'e = Ms, and Mshift = 0.)
Performing simple scaling of measure information. (Let Mshift = 0.)
For examples of these operations, see usage notes and examples for the SDO_LRS.SCALE_GEOM_SEGMENT function in Chapter 14.
You can create a new geometric segment by performing an offsetting operation on a geometric segment. Figure 614 shows the mapping relationship for geometric segment offsetting.
Figure 614 Offsetting a Geometric Segment
In the offsetting operation shown in Figure 614, the resulting geometric segment is offset by 5 units from the specified start and end measures of the original segment.
For more information, see usage notes and examples for the SDO_LRS.OFFSET_GEOM_SEGMENT function in Chapter 14.
You can find the position of a point described by a measure and an offset on a geometric segment (see Figure 615).
Figure 615 Locating a Point Along a Segment with a Measure and an Offset
There is always a unique a location with a specific measure on a geometric segment. Ambiguity arises when offsets are given and the points described by the measures fall on shape points of the geometric segment (see Figure 616).
Figure 616 Ambiguity in Location Referencing with Offsets
As shown in Figure 616, an offset arc of a shape point on a geometric segment is an arc on which all points have the same minimum distance to the shape point. As a result, all points on the offset arc are represented by the same (measure, offset) pair. To resolve this onetomany mapping problem, the middle point on the offset arc is returned.
You can find the projection point of a point with respect to a geometric segment. The point to be projected can be on or off the segment. If the point is on the segment, the point and its projection point are the same.
Projection is a reverse operation of the pointlocating operation shown in Figure 615. Similar to a pointlocating operation, all points on the offset arc of a shape point will have the same projection point (that is, the shape point itself), measure, and offset (see Figure 616). If there are multiple projection points for a point, the first one from the start point is returned (projection pt 1 in both illustrations in Figure 617).
Figure 617 Multiple Projection Points
You can convert geometries from standard line string format to Linear Referencing System format, and vice versa. The main use of conversion functions will probably occur if you have a large amount of existing line string data, in which case conversion is a convenient alternative to creating all of the LRS segments manually. However, if you need to convert LRS segments to standard line strings for certain applications, that capability is provided also.
Functions are provided to convert:
Individual line strings or points
For conversion from standard format to LRS format, a measure dimension (named M by default) is added, and measure information is provided for each point. For conversion from LRS format to standard format, the measure dimension and information are removed. In both cases, the dimensional information (DIMINFO) metadata in the USER_SDO_GEOM_METADATA view is not affected.
Layers (all geometries in a column)
For conversion from standard format to LRS format, a measure dimension (named M by default) is added, but no measure information is provided for each point. For conversion from LRS format to standard format, the measure dimension and information are removed. In both cases, the dimensional information (DIMINFO) metadata in the USER_SDO_GEOM_METADATA view is modified as needed.
Dimensional information (DIMINFO)
The dimensional information (DIMINFO) metadata in the USER_SDO_GEOM_METADATA view is modified as needed. For example, converting a standard dimensional array with X and Y dimensions (SDO_DIM_ELEMENT) to an LRS dimensional array causes an M dimension (SDO_DIM_ELEMENT) to be added.
Figure 618 shows the addition of measure information when a standard line string is converted to an LRS line string (using the SDO_LRS.CONVERT_TO_LRS_GEOM function). The measure dimension values are underlined in Figure 618.
Figure 618 Conversion from Standard to LRS Line String
For conversions of point geometries, the SDO_POINT attribute (described in Section 2.2.3) in the returned geometry is affected as follows:
If a standard point is converted to an LRS point, the SDO_POINT attribute information in the input geometry is used to set the SDO_ELEM_INFO and SDO_ORDINATES attributes (described in Section 2.2.4 and Section 2.2.5) in the resulting geometry, and the SDO_POINT attribute in the resulting geometry is set to null.
If an LRS point is converted to a standard point, the information in the SDO_ELEM_INFO and SDO_ORDINATES attributes (described in Section 2.2.4 and Section 2.2.5) in the input geometry is used to set the SDO_POINT attribute information in the resulting geometry, and the SDO_ELEM_INFO and SDO_ORDINATES attributes in the resulting geometry are set to null.
The conversion functions are listed in Table 143 in Chapter 14. See also the reference information in Chapter 14 about each conversion function.
This section presents a simplified example that uses LRS functions. It refers to concepts that are explained in this chapter and uses functions documented in Chapter 14.
This example uses the road that is illustrated in Figure 619.
Figure 619 Simplified LRS Example: Highway
In Figure 619, the highway (Route 1) starts at point 2,2 and ends at point 5,14, follows the path shown, and has six entranceexit points (Exit 1 through Exit 6). For simplicity, each unit on the graph represents one unit of measure, and thus the measure from start to end is 27 (the segment from Exit 5 to Exit 6 being the hypotenuse of a 345 right triangle).
Each row in Table 61 lists an actual highwayrelated feature and the LRS feature that corresponds to it or that can be used to represent it.
Table 61 Highway Features and LRS Counterparts
Highway Feature  LRS Feature 

Named route, road, or street  LRS segment, or linear feature (logical set of segments) 
Mile or kilometer marker  Measure 
Accident reporting and location tracking  SDO_LRS.LOCATE_PT function 
Construction zone (portion of a road)  SDO_LRS.CLIP_GEOM_SEGMENT function 
Road extension (adding at the beginning or end) or combination (designating or renaming two roads that meet as one road)  SDO_LRS.CONCATENATE_GEOM_SEGMENTS function 
Road reconstruction or splitting (resulting in two named roads from one named road)  SDO_LRS.SPLIT_GEOM_SEGMENT function 
Finding the closest point on the road to a point off the road (such as a building)  SDO_LRS.PROJECT_PT function 
Guard rail or fence alongside a road.  SDO_LRS.OFFSET_GEOM_SEGMENT function 
Example 62 does the following:
Creates a table to hold the segment
Inserts the definition of the highway into the table
Inserts the necessary metadata into the USER_SDO_GEOM_METADATA view
Uses PL/SQL and SQL statements to define the segment and perform operations on it
Example 63 includes the output of the SELECT statements in Example 62.
Example 62 Simplified Example: Highway
 Create a table for routes (highways). CREATE TABLE lrs_routes ( route_id NUMBER PRIMARY KEY, route_name VARCHAR2(32), route_geometry MDSYS.SDO_GEOMETRY);  Populate table with just one route for this example. INSERT INTO lrs_routes VALUES( 1, 'Route1', MDSYS.SDO_GEOMETRY( 3302,  line string, 3 dimensions: X,Y,M NULL, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1,2,1),  one line string, straight segments MDSYS.SDO_ORDINATE_ARRAY( 2,2,0,  Start point  Exit1; 0 is measure from start. 2,4,2,  Exit2; 2 is measure from start. 8,4,8,  Exit3; 8 is measure from start. 12,4,12,  Exit4; 12 is measure from start. 12,10,NULL,  Not an exit; measure automatically calculated and filled. 8,10,22,  Exit5; 22 is measure from start. 5,14,27)  End point (Exit6); 27 is measure from start. ) );  Update the Spatial metadata. INSERT INTO USER_SDO_GEOM_METADATA VALUES ( 'lrs_routes', 'route_geometry', MDSYS.SDO_DIM_ARRAY(  20X20 grid MDSYS.SDO_DIM_ELEMENT('X', 0, 20, 0.005), MDSYS.SDO_DIM_ELEMENT('Y', 0, 20, 0.005), MDSYS.SDO_DIM_ELEMENT('M', 0, 20, 0.005)  Measure dimension ), NULL  SRID );  Create the spatial index. CREATE INDEX lrs_routes_idx ON lrs_routes(route_geometry) INDEXTYPE IS MDSYS.SPATIAL_INDEX;  Test the LRS procedures. DECLARE geom_segment MDSYS.SDO_GEOMETRY; line_string MDSYS.SDO_GEOMETRY; dim_array MDSYS.SDO_DIM_ARRAY; result_geom_1 MDSYS.SDO_GEOMETRY; result_geom_2 MDSYS.SDO_GEOMETRY; result_geom_3 MDSYS.SDO_GEOMETRY; BEGIN SELECT a.route_geometry into geom_segment FROM lrs_routes a WHERE a.route_name = 'Route1'; SELECT m.diminfo into dim_array from user_sdo_geom_metadata m WHERE m.table_name = 'LRS_ROUTES' AND m.column_name = 'ROUTE_GEOMETRY';  Define the LRS segment for Route1. This will populate any null measures.  No need to specify start and end measures, because they're already defined  in the geometry. SDO_LRS.DEFINE_GEOM_SEGMENT (geom_segment, dim_array); SELECT a.route_geometry INTO line_string FROM lrs_routes a WHERE a.route_name = 'Route1';  Split Route1 into two segments. SDO_LRS.SPLIT_GEOM_SEGMENT(line_string,dim_array,5,result_geom_1,result_geom_2);  Concatenate the segments that were just split. result_geom_3 := SDO_LRS.CONCATENATE_GEOM_SEGMENTS(result_geom_1, dim_array, result_geom_2, dim_array);  Update and insert geometries into table, to display later. UPDATE lrs_routes a SET a.route_geometry = geom_segment WHERE a.route_id = 1; INSERT INTO lrs_routes VALUES( 11, 'result_geom_1', result_geom_1 ); INSERT INTO lrs_routes VALUES( 12, 'result_geom_2', result_geom_2 ); INSERT INTO lrs_routes VALUES( 13, 'result_geom_3', result_geom_3 ); END; /  First, display the data in the LRS table. SELECT route_id, route_name, route_geometry FROM lrs_routes;  Are result_geom_1 and result_geom2 connected? SELECT SDO_LRS.CONNECTED_GEOM_SEGMENTS(a.route_geometry, b.route_geometry, 0.005) FROM lrs_routes a, lrs_routes b WHERE a.route_id = 11 AND b.route_id = 12;  Is the Route1 segment valid? SELECT SDO_LRS.VALID_GEOM_SEGMENT(route_geometry) FROM lrs_routes WHERE route_id = 1;  Is 50 a valid measure on Route1? (Should return FALSE; highest Route1 measure is 27.) SELECT SDO_LRS.VALID_MEASURE(route_geometry, 50) FROM lrs_routes WHERE route_id = 1;  Is the Route1 segment defined? SELECT SDO_LRS.IS_GEOM_SEGMENT_DEFINED(route_geometry) FROM lrs_routes WHERE route_id = 1;  How long is Route1? SELECT SDO_LRS.GEOM_SEGMENT_LENGTH(route_geometry) FROM lrs_routes WHERE route_id = 1;  What is the start measure of Route1? SELECT SDO_LRS.GEOM_SEGMENT_START_MEASURE(route_geometry) FROM lrs_routes WHERE route_id = 1;  What is the end measure of Route1? SELECT SDO_LRS.GEOM_SEGMENT_END_MEASURE(route_geometry) FROM lrs_routes WHERE route_id = 1;  What is the start point of Route1? SELECT SDO_LRS.GEOM_SEGMENT_START_PT(route_geometry) FROM lrs_routes WHERE route_id = 1;  What is the end point of Route1? SELECT SDO_LRS.GEOM_SEGMENT_END_PT(route_geometry) FROM lrs_routes WHERE route_id = 1;  Shift by 5 (for example, 5mile segment added before original start) SELECT SDO_LRS.SCALE_GEOM_SEGMENT(a.route_geometry, m.diminfo, 0, 27, 5) FROM lrs_routes a, user_sdo_geom_metadata m WHERE m.table_name = 'LRS_ROUTES' AND a.route_id = 1;  "Convert" mile measures to kilometers (27 * 1.609 = 43.443) SELECT SDO_LRS.SCALE_GEOM_SEGMENT(route_geometry, 0, 43.443, 0) FROM lrs_routes WHERE route_id = 1;  Clip a piece of Route1. SELECT SDO_LRS.CLIP_GEOM_SEGMENT(route_geometry, 5, 10) FROM lrs_routes WHERE route_id = 1;  Point (9,3,NULL) is off the road; should return (9,4,9). SELECT SDO_LRS.PROJECT_PT(route_geometry, MDSYS.SDO_GEOMETRY(3301, NULL, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1, 1), MDSYS.SDO_ORDINATE_ARRAY(9, 3, NULL)) ) FROM lrs_routes WHERE route_id = 1;  Return the measure of the projected point. SELECT SDO_LRS.GET_MEASURE( SDO_LRS.PROJECT_PT(a.route_geometry, m.diminfo, MDSYS.SDO_GEOMETRY(3301, NULL, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1, 1), MDSYS.SDO_ORDINATE_ARRAY(9, 3, NULL)) ), m.diminfo ) FROM lrs_routes a, user_sdo_geom_metadata m WHERE m.table_name = 'LRS_ROUTES' AND a.route_id = 1;  Is point (9,3,NULL) a valid LRS point? (Should return TRUE.) SELECT SDO_LRS.VALID_LRS_PT( MDSYS.SDO_GEOMETRY(3301, NULL, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1, 1, 1), MDSYS.SDO_ORDINATE_ARRAY(9, 3, NULL)), m.diminfo) FROM lrs_routes a, user_sdo_geom_metadata m WHERE m.table_name = 'LRS_ROUTES' AND a.route_id = 1;  Locate the point on Route1 at measure 9, offset 0. SELECT SDO_LRS.LOCATE_PT(route_geometry, 9, 0) FROM lrs_routes WHERE route_id = 1;
Example 63 shows the output of the SELECT statements in Example 62.
Example 63 Simplified Example: Output of SELECT Statements
SQL>  First, display the data in the LRS table. SQL> SELECT route_id, route_name, route_geometry FROM lrs_routes; ROUTE_ID ROUTE_NAME   ROUTE_GEOMETRY(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SDO_ORDIN  1 Route1 SDO_GEOMETRY(3302, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY( 2, 2, 0, 2, 4, 2, 8, 4, 8, 12, 4, 12, 12, 10, 18, 8, 10, 22, 5, 14, 27)) 11 result_geom_1 SDO_GEOMETRY(3302, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY( 2, 2, 0, 2, 4, 2, 5, 4, 5)) 12 result_geom_2 ROUTE_ID ROUTE_NAME   ROUTE_GEOMETRY(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SDO_ORDIN  SDO_GEOMETRY(3302, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY( 5, 4, 5, 8, 4, 8, 12, 4, 12, 12, 10, 18, 8, 10, 22, 5, 14, 27)) 13 result_geom_3 SDO_GEOMETRY(3302, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY( 2, 2, 0, 2, 4, 2, 5, 4, 5, 8, 4, 8, 12, 4, 12, 12, 10, 18, 8, 10, 22, 5, 14, 27) ) SQL> SQL>  Are result_geom_1 and result_geom2 connected? SQL> SELECT SDO_LRS.CONNECTED_GEOM_SEGMENTS(a.route_geometry, 2 b.route_geometry, 0.005) 3 FROM lrs_routes a, lrs_routes b 4 WHERE a.route_id = 11 AND b.route_id = 12; SDO_LRS.CONNECTED_GEOM_SEGMENTS(A.ROUTE_GEOMETRY,B.ROUTE_GEOMETRY,0.005)  TRUE SQL> SQL>  Is the Route1 segment valid? SQL> SELECT SDO_LRS.VALID_GEOM_SEGMENT(route_geometry) 2 FROM lrs_routes WHERE route_id = 1; SDO_LRS.VALID_GEOM_SEGMENT(ROUTE_GEOMETRY)  TRUE SQL> SQL>  Is 50 a valid measure on Route1? (Should return FALSE; highest Route1 measure is 27.) SQL> SELECT SDO_LRS.VALID_MEASURE(route_geometry, 50) 2 FROM lrs_routes WHERE route_id = 1; SDO_LRS.VALID_MEASURE(ROUTE_GEOMETRY,50)  FALSE SQL> SQL>  Is the Route1 segment defined? SQL> SELECT SDO_LRS.IS_GEOM_SEGMENT_DEFINED(route_geometry) 2 FROM lrs_routes WHERE route_id = 1; SDO_LRS.IS_GEOM_SEGMENT_DEFINED(ROUTE_GEOMETRY)  TRUE SQL> SQL>  How long is Route1? SQL> SELECT SDO_LRS.GEOM_SEGMENT_LENGTH(route_geometry) 2 FROM lrs_routes WHERE route_id = 1; SDO_LRS.GEOM_SEGMENT_LENGTH(ROUTE_GEOMETRY)  27 SQL> SQL>  What is the start measure of Route1? SQL>  What is the start measure of Route1? SQL> SELECT SDO_LRS.GEOM_SEGMENT_START_MEASURE(route_geometry) 2 FROM lrs_routes WHERE route_id = 1; SDO_LRS.GEOM_SEGMENT_START_MEASURE(ROUTE_GEOMETRY)  0 SQL> SQL>  What is the end measure of Route1? SQL> SELECT SDO_LRS.GEOM_SEGMENT_END_MEASURE(route_geometry) 2 FROM lrs_routes WHERE route_id = 1; SDO_LRS.GEOM_SEGMENT_END_MEASURE(ROUTE_GEOMETRY)  27 SQL> SQL>  What is the start point of Route1? SQL> SELECT SDO_LRS.GEOM_SEGMENT_START_PT(route_geometry) 2 FROM lrs_routes WHERE route_id = 1; SDO_LRS.GEOM_SEGMENT_START_PT(ROUTE_GEOMETRY)(SDO_GTYPE, SDO_SRID, SDO_POINT(X,  SDO_GEOMETRY(3301, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 1, 1), SDO_ORDINATE_ARRAY( 2, 2, 0)) SQL> SQL>  What is the end point of Route1? SQL> SELECT SDO_LRS.GEOM_SEGMENT_END_PT(route_geometry) 2 FROM lrs_routes WHERE route_id = 1; SDO_LRS.GEOM_SEGMENT_END_PT(ROUTE_GEOMETRY)(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y,  SDO_GEOMETRY(3301, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 1, 1), SDO_ORDINATE_ARRAY( 5, 14, 27)) SQL> SQL>  Shift by 5 (for example, 5mile segment added before original start) SQL> SELECT SDO_LRS.SCALE_GEOM_SEGMENT(a.route_geometry, m.diminfo, 0, 27, 5) 2 FROM lrs_routes a, user_sdo_geom_metadata m 3 WHERE m.table_name = 'LRS_ROUTES' AND m.column_name = 'ROUTE_GEOMETRY' 4 AND a.route_id = 1; SDO_LRS.SCALE_GEOM_SEGMENT(A.ROUTE_GEOMETRY,M.DIMINFO,0,27,5)(SDO_GTYPE, SDO_SRI  SDO_GEOMETRY(3302, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY( 2, 2, 5, 2, 4, 7, 8, 4, 13, 12, 4, 17, 12, 10, 23, 8, 10, 27, 5, 14, 32)) SQL> SQL>  "Convert" mile measures to kilometers (27 * 1.609 = 43.443) SQL> SELECT SDO_LRS.SCALE_GEOM_SEGMENT(route_geometry, 0, 43.443, 0) 2 FROM lrs_routes WHERE route_id = 1; SDO_LRS.SCALE_GEOM_SEGMENT(ROUTE_GEOMETRY,0,43.443,0)(SDO_GTYPE, SDO_SRID, SDO_P  SDO_GEOMETRY(3302, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY( 2, 2, 0, 2, 4, 3.218, 8, 4, 12.872, 12, 4, 19.308, 12, 10, 28.962, 8, 10, 35.398 , 5, 14, 43.443)) SQL> SQL>  Clip a piece of Route1. SQL> SELECT SDO_LRS.CLIP_GEOM_SEGMENT(route_geometry, 5, 10) 2 FROM lrs_routes WHERE route_id = 1; SDO_LRS.CLIP_GEOM_SEGMENT(ROUTE_GEOMETRY,5,10)(SDO_GTYPE, SDO_SRID, SDO_POINT(X,  SDO_GEOMETRY(3302, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY( 5, 4, 5, 8, 4, 8, 10, 4, 10)) SQL> SQL>  Point (9,3,NULL) is off the road; should return (9,4,9). SQL> SELECT SDO_LRS.PROJECT_PT(route_geometry, 2 MDSYS.SDO_GEOMETRY(3301, NULL, NULL, 3 MDSYS.SDO_ELEM_INFO_ARRAY(1, 1, 1), 4 MDSYS.SDO_ORDINATE_ARRAY(9, 3, NULL)) ) 5 FROM lrs_routes WHERE route_id = 1; SDO_LRS.PROJECT_PT(ROUTE_GEOMETRY,MDSYS.SDO_GEOMETRY(3301,NULL,NULL,MDSYS.SDO_EL  SDO_GEOMETRY(3301, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 1, 1), SDO_ORDINATE_ARRAY( 9, 4, 9)) SQL> SQL>  Return the measure of the projected point. SQL> SELECT SDO_LRS.GET_MEASURE( 2 SDO_LRS.PROJECT_PT(a.route_geometry, m.diminfo, 3 MDSYS.SDO_GEOMETRY(3301, NULL, NULL, 4 MDSYS.SDO_ELEM_INFO_ARRAY(1, 1, 1), 5 MDSYS.SDO_ORDINATE_ARRAY(9, 3, NULL)) ), 6 m.diminfo ) 7 FROM lrs_routes a, user_sdo_geom_metadata m 8 WHERE m.table_name = 'LRS_ROUTES' AND m.column_name = 'ROUTE_GEOMETRY' 9 AND a.route_id = 1; SDO_LRS.GET_MEASURE(SDO_LRS.PROJECT_PT(A.ROUTE_GEOMETRY,M.DIMINFO,MDSYS.SDO_GEOM  9 SQL> SQL>  Is point (9,3,NULL) a valid LRS point? (Should return TRUE.) SQL> SELECT SDO_LRS.VALID_LRS_PT( 2 MDSYS.SDO_GEOMETRY(3301, NULL, NULL, 3 MDSYS.SDO_ELEM_INFO_ARRAY(1, 1, 1), 4 MDSYS.SDO_ORDINATE_ARRAY(9, 3, NULL)), 5 m.diminfo) 6 FROM lrs_routes a, user_sdo_geom_metadata m 7 WHERE m.table_name = 'LRS_ROUTES' AND m.column_name = 'ROUTE_GEOMETRY' 8 AND a.route_id = 1; SDO_LRS.VALID_LRS_PT(MDSYS.SDO_GEOMETRY(3301,NULL,NULL,MDSYS.SDO_ELEM_INFO_ARRAY  TRUE SQL> SQL>  Locate the point on Route1 at measure 9, offset 0. SQL> SELECT SDO_LRS.LOCATE_PT(route_geometry, 9, 0) 2 FROM lrs_routes WHERE route_id = 1; SDO_LRS.LOCATE_PT(ROUTE_GEOMETRY,9,0)(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), S  SDO_GEOMETRY(3301, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 1, 1), SDO_ORDINATE_ARRAY( 9, 4, 9))

Copyright © 1999, 2002 Oracle Corporation All rights reserved 
