Oracle® Mail Administrator's Guide 10g Release 1 (10.1.1) Part Number B14491-03 |
|
|
View PDF |
This chapter describes how to set up monitoring for the Oracle Mail component of Oracle Collaboration Suite. An Oracle Mail installation may be spread over dozens of computers.
Monitoring Oracle Mail can also be done using the oesmon
and oeschart
command-line utilities.
This chapter discusses the following topics:
Monitoring Oracle Mail Using Oracle Enterprise Manager 10g Grid Control Console
Purging Monitoring Data from the Oracle Collaboration Suite Database
The following instructions assume that Oracle Mail is already installed and that Oracle Enterprise Manager 10g Grid Control Console and Oracle Management Agent are already installed. Furthermore, the following instructions assume that you have detailed knowledge of how Oracle Mail is configured and where the different protocol servers are running.
In this section you will create targets that represent components of your Oracle Mail deployment. In addition, an Oracle Mail group target will be created. The group target will include all the component Oracle Mail targets.
This section discusses the following topics:
Oracle Mail has several protocols and there are distinct services and servers for each type of protocol:
IMAP
SMTP Inbound
SMTP Outbound
POP
Webmail
An Oracle Mail server refers to a specific process running on a specific host. As a result, the up or down metric for a server indicates whether or not the process is running. An Oracle Mail service refers to the service provided by a collection of processes. For a service, the up or down metric indicates whether or not a user can make use of that service.
These Oracle Mail services and servers are often spread over hosts and databases. Create the targets as follows:
One service target for each logical service
One information store target for each Oracle Collaboration Suite Database
Before you begin creating the Oracle Mail targets, you should have a complete list of the hosts and the databases where your Oracle Mail components reside. For example, you should know the system identifier (SID) and password for each database.
The following sections describe how you can obtain this information using the Oracle Internet Directory for your Oracle Collaboration Suite installations:
Identifying the Oracle Mail Oracle Collaboration Suite Databases
Identifying the Connection String for an Oracle Mail Oracle Collaboration Suite Database
Identifying the Oracle Mail Component Hosts
You can identify the Oracle Mail hosts by using the following ldapsearch
command for your Oracle Internet Directory:
$PROMPT> ldapsearch -hoid_host -poid_port -Dcn=orcladmin -wwelcome1 -b 'cn=Computers,cn=OracleContext' 'objectclass=orclMailProcessConf' orclmailinstanceid
For example:
$PROMPT> ldapsearch -has15.acme.com -p4032 -Dcn=orcladmin -wx9djiks189 -b 'cn=Computers,cn=OracleContext' 'objectclass=orclMailProcessConf' orclmailinstanceid
Identifying the Oracle Mail Oracle Collaboration Suite Databases
To identify the hosts and the names of the databases where your Oracle Collaboration Suite Databases are located, you can use the following ldapsearch
command for your Oracle Internet Directory:
$PROMPT> ldapsearch -hoid_host -poid_port -Dcn=orcladmin -worcladmin_pwd -b 'cn=EMailServerContainer,cn=Products,cn=OracleContext' 'objectclass=orclMailStores'
For example:
$PROMPT> ldapsearch -hmgthost42.acme.com -p3060 -Dcn=orcladmin -wx9djiksl89 -b 'cn=EMailServerContainer,cn=Products,cn=OracleContext' 'objectclass=orclMailStores'
Identifying the Connection String for an Oracle Mail Oracle Collaboration Suite Database
Find the connection string for an Oracle Collaboration Suite Database, so you can connect to the information store or provide the host, port, SID, username, or password properties for the mail store, as follows:
Obtain the value of the orclDBDistinguishedName
attribute for the Oracle Collaboration Suite Database.
You can obtain this value by searching for the Oracle Collaboration Suite Database host and database properties, using the command described in "Identifying the Oracle Mail Oracle Collaboration Suite Databases".
Use the ldapsearch
command to find the orclnetdescrstring
attribute of the Oracle Collaboration Suite Database:
$PROMPT> ldapsearch -hoid_host -poid_port -Dcn=orcladmin -worcladmin_pwd -b 'value_of_orclDBDistinguishedName' -s base 'objectclass=*'
For example:
$PROMPT> ldapsearch -hmgthost42.acme.com -p3060 -Dcn=orcladmin -wx9djiksl89 -b 'cn=v2store,cn=OracleContext' -s base 'objectclass=*'
The service targets monitor the Oracle Mail services. Thus, it is most beneficial to locate these targets close to where the user community using the services resides. It is also possible to create multiple targets for each service in order to measure responsiveness from multiple geographical locations.
One service target must be created for each service type. For example, an SMTP IN Service is implemented over four hosts; however, only one target is needed to monitor the overall service.
Regarding the Oracle WebMail service, the same guidelines apply. For Oracle WebMail, however, use the Oracle Enterprise Manager 10g application performance management capabilities for monitoring.
Oracle Enterprise Manager 10g includes the following Oracle Mail service types:
E-Mail SMTP Inbound Service
E-Mail SMTP Outbound Service
E-Mail IMAP Service
E-Mail POP Service
E-Mail NNTP Inbound Service
To configure service monitoring, configure targets at points in the network close to the user communities accessing Oracle Mail. Thus, having an SMTP_IN service monitoring target type in a few key geographical locations is necessary to get an overall perspective on the SMTP_IN monitoring.
Oracle suggests using the following naming convention for service targets: SMTP_IN_SERVICE_
information_store
location_of_observation
, such as SMTP_IN_SERVICE_EMEA_LONDON
.
For monitoring Oracle WebMail, create a Web Application target and record an availability transaction for Oracle WebMail. This transaction must be run from beacons in key geographical locations that represent user communities.
This section discusses the following topics:
Create Oracle Mail service targets, as follows:
Using the Grid Control Console, navigate to the Agent home page for the Oracle Management Agent that was installed on the Oracle Collaboration Suite Database host, as follows:
Click the Targets tab.
Click the link in the Name column of the Host type.
Click the Targets link.
Click the link in the Name column of the Agent type.
In the Monitored Targets section of the page, select one of the following service types from the Add drop-down menu and click Go to display the Add E-Mail Service page for that particular service:
E-Mail SMTP Inbound Service
E-Mail SMTP Outbound Service
E-Mail IMAP Service
E-Mail POP Service
E-Mail NNTP Inbound Service
Note:
Ensure that you select a Service and not a Server.Oracle recommends creating targets for the E-Mail IMAP and E-Mail SMTP Inbound services, at the minimum, as described in the subsequent steps.
Select E-Mail IMAP Service from the Add drop-down menu and click Go to display the Add E-Mail IMAP Service page.
On the Add E-Mail IMAP Service page, enter a name for the target in the Name field.
Provide the required information, as described in Table 7-1.
Table 7-1 E-Mail IMAP Service Target Properties
Property | Description |
---|---|
Service Address |
The hostname or the IP address of the load balancer or system used by clients for accessing the IMAP service. |
Service Port |
The port where the IMAP service is running. |
E-Mail Address |
The e-mail address of a test user account to be used for the status and the service availability of the IMAP service. You can use the |
E-Mail Password |
The e-mail account password of a test user account to be used for the status and the service availability of the IMAP service. |
Click OK to create the target.
Select E-Mail SMTP Inbound Service from the Add drop-down menu and click Go to display the Add E-Mail SMTP Inbound Service page.
On the Add E-Mail SMTP Inbound Service page, enter a name for the target in the Name field.
Provide the required information, as described in Table 7-2.
Table 7-2 E-Mail SMTP Inbound Service Target Properties
Property | Description |
---|---|
SMTP Host |
The hostname or the IP address of the Big-IP or the system used for accessing the SMTP IN service. |
Sender E-Mail |
The e-mail address of a test account used for sending an e-mail and that will be used for the status and the service availability of the SMTP IN service. You can use the |
Recipient E-Mail |
The e-mail address of a test account used for receiving an e-mail and that will be used for the status and the service availability of the SMTP IN service. You can use the Note: Sender E-Mail and Recipient E-Mail can be the same address. |
Click OK to create the target.
Follow these same procedures for creating POP, NNTP-Inbound, and SMTP Outbound service targets.
To monitor your Oracle WebMail instances, create a Web Application target for each Oracle WebMail instance. Web Application targets can be monitored for availability and performance with Application Performance Management transactions. You can also measure the response time of pages in your Web Applications using End-User Performance Monitoring.
Create a Web Application target for your Oracle WebMail instance, as follows:
Using the Grid Control Console, navigate to the Agent home page for the Oracle Management Agent that was installed on the Oracle WebMail host.
In the Monitored Targets section of the page, select Web Application from the Add drop-down list.
Oracle Enterprise Manager 10g displays the Create Web Application wizard, which guides you through the process of creating the Web Application.
When prompted for the home page URL, enter the URL for the Oracle WebMail instance. For example:
http://host1.acme.com:7778/um/traffic_cop
Click Help if you need help using the Wizard.
Click OK to create the target.
Use the instructions in the online help to create some representative transactions to measure the availability and performance of the Web Application you just created.
For example, create a transaction that logs in and reads an e-mail message.
See Also:
Oracle Enterprise Manager Advanced Configuration to enable End-User Performance Monitoring for the Web Application using the procedures for earlier versions of the Oracle Application ServerNote:
Before you enable End-User Performance Monitoring to monitor your Oracle Collaboration Suite Web Application target, you must apply patch number 3040716 to the Oracle Application Server middle tier instance. You can download this patch from OracleMetaLink:http://metalink.oracle.com/
One information store target must be created for each Oracle Collaboration Suite Database created for Oracle Mail. It is also possible to locate these targets on any host on the network capable of accessing the Oracle Collaboration Suite Database. The benefit of this approach is that the target deployment becomes non-intrusive to the Oracle Mail information stores.
Oracle Enterprise Manager 10g includes one Oracle Mail information store target type. You must add and configure an information store target for each Oracle Collaboration Suite Database in the network that you want to monitor.
Create an Oracle Mail information store target, as follows:
Using the Grid Control Console, navigate to the Agent home page for the Oracle Management Agent that was installed on the Oracle Collaboration Suite Database host, as follows:
Click the Targets tab.
Click the link in the Name column of the Host type.
Click the Targets link.
Click the link in the Name column of the Agent type.
In the Monitored Targets section of the page, select E-Mail Collaboration Suite Database from the Add drop-down menu and click Go to display the Add E-Mail Collaboration Suite Database page.
Provide the required information, as described in Table 7-3.
Table 7-3 E-Mail Collaboration Suite Database Target Properties
Property | Description |
---|---|
Collaboration Suite Database Connector Descriptor |
The connect descriptor for the Oracle Collaboration Suite Database |
Collaboration Suite Database User |
The e-mail schema username; enter |
Collaboration Suite Database Password |
The password for the |
Oracle Home |
The |
Number of Samples |
A parameter used to calculate mail delivery times. Enter 10 |
Receiving Inbound Server Name |
A parameter used to trace the route of an e-mail. Enter your hostname; for example |
Receiving OCS Server Name |
A parameter used to trace the route of an e-mail. Enter your hostname; for example |
Click OK to create the target.
Oracle Internet Directory client targets are useful to measure responsiveness of Oracle Internet Directory for Oracle Mail. Thus, one such target must be created on each host where an Oracle Mail server runs. The collection of such targets will give a view of Oracle Internet Directory responsiveness across all Oracle Mail hosts.
Create the Oracle Internet Directory client target, as follows:
Using the Grid Control Console, navigate to the Agent home page for the Oracle Management Agent that was installed on the Oracle Internet Directory Client host, as follows:
Click the Targets tab.
Click the link in the Name column of the Host type.
Click the Targets link.
Click the link in the Name column of the Agent type.
In the Monitored Targets section of the page, select OID Client from the Add drop-down list and click Go to display the Add OID Client page.
Provide the required information, as described in Table 7-4:
Table 7-4 Oracle Internet Directory Client Target Properties
Property | Description |
---|---|
LDAP Client Oracle home path |
The path of the Oracle home of the LDAP client system. This will be used to invoke the For example, the LDAP_Client_Oracle_home_path/bin/
|
LDAP Host |
The host name of the system where the LDAP server is running. |
LDAP Port |
The port where the LDAP server is running. |
LDAP User |
The username of a test user account that is needed for the "cn=emd admin,cn=oracle internet directory" |
LDAP Password |
The password of the test user account that is needed for the |
Click OK to create the target.
After all the Oracle Mail targets are configured, you can create the e-mail group target, which provides a custom user interface for managing your Oracle Collaboration Suite environment.
The Oracle Collaboration Suite Email group home page contains the alerts table, followed by a table of rows of component targets and columns of key metrics. The server targets listed here can also be remotely started and stopped from this page.
Create the e-mail group target, as follows:
Click the Targets tab in the Grid Control Console.
Click All Targets.
Select Collaboration Suite Component from the Add drop-down list and click Go to display the Create Collaboration Suite Component: Component Type page.
Select E-Mail from the list of Oracle Collaboration Suite components and click Continue to display the Create Collaboration Suite Component: Targets page.
Enter a name for the e-mail group in the Name field, such as My Email
.
Select the following targets from the Target Type drop-down list. Select the target from the Available Targets list and use the Move or Move All arrow to shuttle the target to the Selected Targets list.
Host: The host targets where the Oracle Mail servers reside
The database and listener targets that support the Oracle Mail servers
An E-Mail IMAP Service and E-Mail IMAP Server
An E-Mail SMTP Inbound Service and E-Mail SMTP Inbound Server
An E-Mail SMTP Outbound Server
An E-Mail POP Server
An E-Mail NNTP Inbound Server
An E-Mail List Server
An E-Mail Virus Scrubber
An E-Mail Housekeeper
An E-Mail Collaboration Suite Database
An Oracle Internet Directory Client
An E-Mail Web Application
Click OK to create the group target.
Add this group to any existing or future Oracle Collaboration Suite group.
When you monitor your Oracle Mail targets with Oracle Enterprise Manager 10g, the Oracle Management Agent gathers monitoring data about the Oracle Mail targets and uploads them to the Management Service, which loads them into the Management Repository.
However, the Oracle Mail information store itself also gathers monitoring data about your Oracle Mail targets. After you start monitoring your Oracle Mail targets with Oracle Enterprise Manager 10g, the data saved in the Oracle Collaboration Suite Database is redundant with the information available in the Management Repository.
Note:
Purging monitoring data is done automatically by the Housekeeper process when it is configured to run in theStatistics Cleanup
operation mode.oesmon
and oeschart
are command-line utilities used to collect and view Oracle Mail system statistics for the purposes of monitoring the performance of Oracle Mail.
This section discusses the following topics:
The oesmon
utility obtains raw metric data directly from Oracle Mail server processes and provides a summary of the mail system's statistics. Each statistic is represented by either an ASCII string or a number, rendered in keyword-value pairs.
Table 7-5 lists oesmon
syntax options.
Table 7-5 oesmon Syntax Options
Command | Description |
---|---|
oesmon |
Returns the usage message |
oesmon targets |
Lists all possible targets for Oracle Mail servers |
oesmon names target
|
Lists all of the metric names for a particular target |
oesmon get target metric_name
|
Returns the statistics |
Oracle Mail has nine service types, such as the IMAP service. These services can run on the same host or on separate hosts. One or more instance of a service can be running on a host. The oesmon
utility collects statistical information on a service on a host (target). Targets are named as a concatenation of:
host:um_system:service_type
where:
host
is the name of the host where the service is running
service_type
is one of the following listed in Table 7-6:
Table 7-6 Different Service Types Used in Target Names
service_type | Description |
---|---|
gc |
Housekeeper |
imap |
IMAP server |
list |
List Server |
pop |
POP server |
smtp_in |
SMTP process for inbound mail routing |
smtp_out |
SMTP process for outbound mail routing |
nntp_in |
NNTP inbound news server |
nntp_out |
NNTP outbound news server |
vs |
Virus Scrubber |
All statistics and managed objects have names. Names are case sensitive and contain only alphanumeric characters and the underscore character (_
). Statistic names are hierarchical and separated by a period (.
). A request for a managed object returns all of the managed objects and statistics beneath it.
See Also:
Appendix H, "Oracle Mail Server Metrics" for a complete list of the available statisticsConsider the following example:
oesmon get mycomputer:um_system:pop .um.admin
In this case, two values are returned for the two metric objects in the hierarchy:
process identifier
date and time the service was started
.um.admin.os_pid = 8239
.um.admin.uptime = Wed Jan 29 14:17:36 2003
.um.admin.log.discard = 0
.um.admin.log.total = 100
where:
.um.admin.log.discard
is the number of log messages discarded when high log levels cause log messages to be generated faster than they can be written to disk
.um.admin.log.total
is the total number of log messages logged by the processes, including the ones that are discarded and written to disk
oesmon get mycomputer:um_system:pop .um.admin.os_pid
Only the process identifier is returned.
.um.admin.os_pid = 8239
See Also:
Appendix H, "Oracle Mail Server Metrics" for more information on server statisticsOracle Mail servers track a range of metrics that are periodically stored in a set of mail statistics tables. The oeschart
utility generates charts and images that can be used to publish reports and Web pages; providing a company with a graphic picture of the status of the mail system implementation.
This section discusses the following topics:
You can set the frequency by which metrics are sampled and recorded using the oidadmin
administration tool provided by Oracle Internet Directory.
Note:
The collection interval parameters are not configurable in Oracle Enterprise Manager 10g.The orclMailAdminCollectionInterval
parameter specifies the number of seconds that elapse between statistics collecting. A setting of zero (0
) seconds stops the service from logging statistics altogether.
Set the orclMailAdminCollectionInterval
parameter at the target level, rather than the instance level. If you set the value at the instance level, statistics collection occurs at different intervals for each instance of the same type of mail service.
Collecting statistics at the same interval for all server types is not recommended. The collection process utilizes different amounts of resources and collects statistics of varying degrees, depending on which mail service is engaged in collecting the statistics. For example, the Housekeeper process is more resource intensive and collects fewer dynamic statistics than the SMTP server collection process.
The recommended collection intervals for the different types of servers are:
Housekeeper: 3600 (one hour)
IMAP: 600 (ten minutes)
POP: 600 (ten minutes)
SMTP_IN: 600 (ten minutes)
SMTP_OUT: 600 (ten minutes)
List: 600 (ten minutes)
NNTP_IN: 600 (ten minutes)
NNTP_OUT: 600 (ten minutes)
Perform the following steps to clean up mail statistics through the Housekeeper process:
Using Application Server Control Console for Collaboration Suite, navigate to the Oracle Mail Service Targets page.
See Also:
"Oracle Enterprise Manager 10g Application Server Control Console for Collaboration Suite" for information about accessing Application Server Control Console for Collaboration SuiteClick Housekeeper.
Click an instance in the Process Instances section.
Select Statistics Cleanup
from the Operation Mode drop-down list in the Housekeeping Operations section.
Click Apply.
Return to the Housekeeper page.
Click the name of the instance you selected in step 3.
In the General Parameters section, enter the number of days you want to retain sample data in the Age Threshold parameter.
Click Apply.
Stop and start the Housekeeper process to apply the changes.
Each mail process has a default store database. Processes supporting multiple stores, such as the IMAP server, have a default store that is set in the orclMailAdminStoreDN
parameter during the installation of each Oracle Collaboration Suite Applications Tier.
Statistical information is stored in tables in the esperftbl
tablespace in the default mail store of the process. Because these tables can expand indefinitely, you should monitor the esperftbl
tablespace and delete or export data as needed.
The schema consists of the following:
The es_perf_process
table is a list of the process instance records. The column process_dn
is the complete distinguished name (DN) of the process, found in Oracle Internet Directory. The processes that produce metric data insert records into this table as needed.
Table 7-7 lists values and descriptions for columns contained in the es_perf_process
table.
Table 7-8 lists values and descriptions for columns contained in the es_perf_metric
table.
Table 7-8 es_perf_metric Table
Column Name | Value | Description |
---|---|---|
metric_id |
Number (non-zero) |
Internally assigned unique number for each metric |
metric_name |
Varchar2 (100) |
Name of the metric |
metric_type |
Number (non-zero) |
If If |
The es_perf_timestamp
table records each time metric data is stored into the tables. This table, along with the es_perf_data
table grows without bound over time. You must clean out historic data that is no longer needed for charting or analysis at their installation. This can be done by configuring the Housekeeper process.
Table 7-9 lists values and descriptions for columns contained in the es_perf_timestamp
table.
The es_perf_sample
table records each metric at each timestamp. This table increases over time, so you must delete data that is no longer required in order to keep the table size manageable.
There are two possible columns that store the sample data, depending upon whether the data is numerical (nvalue
) or a string (svalue
).
Table 7-10 lists values and descriptions for columns contained in the es_perf_sample
table.
Table 7-10 es_perf_sample Table
Column Name | Value | Description |
---|---|---|
process_id |
Number (non-zero) |
Corresponds to the |
metric_id |
Varchar2 (100) |
Corresponds to the |
timestamp_id |
Number (non-zero) |
Corresponds to the |
nvalue |
Number |
Numeric value of the metric (if the metric is numeric) |
svalue |
Varchar2 (1000) |
String value of the metric (if the metric is a string) |
es_perf_data
is a view of the tables described in this section: es_perf_process
, es_perf_metric
, es_perf_timestamp
, and es_perf_sample
.
Table 7-11 lists values and descriptions for columns contained in the es_perf_data
view.
Table 7-11 es_perf_data View
Column Name | Value | Description |
---|---|---|
process_dn |
Varchar2 (500) |
The DN of the process in Oracle Internet Directory |
metric_name |
Varchar22 (100) |
Name of the metric |
metric_type |
Number (non-zero) |
If If |
timestamp |
Date |
Time the value was sampled |
nvalue |
Number (non-zero) |
Numeric value of the metric (if the metric is numeric) |
svalue |
Varchar2 (1000) |
String value of the metric (if the metric is a string) |
The oeschart
utility creates graphs. The utility requires a single command-line parameter that points to a property file. The property file is a text file with keyword value pairs defining the information the utility needs to generate the graph. A valid property file would have the following mandatory and optional parameters.
Table 7-12 and Table 7-13 describe mandatory entries and optional values, respectively:
Table 7-12 oeschart Mandatory Properties
Parameter | Description |
---|---|
server |
Host name of the statistics database |
port |
Database listener port |
sid |
SID or service name for the server |
username |
Account user |
password |
Account password |
process_dn |
Query used to gather statistics, such as |
metric_name |
Metric to query |
graph_type |
Type of graph. Possible graphs are:
|
image_file_name |
Choose a name for the generated file. Note: Either |
image_title |
Title to display on the graph |
number_of_hours |
Number of hours, going backward in time, starting from the present |
Table 7-13 oeschart Optional Properties
Parameter | Default | Description |
---|---|---|
encode_type |
|
Possible values are |
image_dir |
|
Directory where graphs are stored |
aggregate_ time_period |
|
Time span in which multiple logging processes are grouped together and the metrics combined to show an aggregate value. As an example, consider two running IMAP servers, IMAP1and IMAP2. IMAP1 logged its statistics at 3:00pm and IMAP2 logged its statistics at 3:02 pm. The servers log statistics at intervals specified in seconds using To show the total number of sockets on the system, combine the values from IMAP1 and IMAP2. |
max_lifetime |
|
Number of seconds until the program terminates |
show_ statistics |
FALSE |
Number of data points, minimum, maximum, average, and median, at the bottom of the graph |
debug |
FALSE |
Provides a detailed output of the utility |
The following is an example of a property file that informs the oeschart
utility to generate an xy graph of the number of concurrent IMAP sockets for all IMAP servers in aggregate over the last twenty four hours:
server=testdb.acme.com sid=test port=1521 username=schema_owner_username password=schema_owner_username_password process_dn=test1:um_system:imap: graph_type=xy_current image_dir=full_path_images_directory number_of_hours=24 encode_type=png show_statistics=true aggregate_time_period=600 debug=false max_lifetime=120 metric_name=.ES_SPS.socket.currload image_file_name=socketcount image_title=Socket count on test1
See Also:
Appendix H, "Oracle Mail Server Metrics" for a complete list of metric namesoeschart
obtains information from the es_perf
schema and generates one of four possible types of charts. Three of these are variations of scatter graphs. The fourth is a bar chart.
By executing oeschart
at regular intervals, you are provided with a current view that can be published on a company Web site or within Oracle Enterprise Manager 10g.
For example, you can schedule the creation of graphs that show information such as the number of connected sockets, the log in response time, and the number of queued outbound messages, and publish the results in a custom HTML page or in Oracle Enterprise Manager.
To display graphs in Oracle Enterprise Manager:
Modify the target metadata definition.
The $ORACLE_HOME/sysman/admin/metadata
directory contains a list of target metadata definition files.
For a particular target definition, add the following elements to the Instance Properties section:
<!--This property specifies the total number of statistic charts to be displayed --> <InstanceProperty NAME="totalNumberOfStats" CREDENTIAL="FALSE" OPTIONAL="TRUE"> <Display> <Label NLSID="totalnumberofstats">Total Number of Statistics</Label> </Display> </InstanceProperty> <!--This property specifies the header title for the first charting picture --> <InstanceProperty NAME="Title0" CREDENTIAL="FALSE" OPTIONAL="TRUE"> <Display> <Label NLSID="stat0">Statistic Number 0</Label> </Display> </InstanceProperty> <!--This property specifies the tool tips string for the first charting picture, coded to Section 508 standards--> <InstanceProperty NAME="ToolTips0" CREDENTIAL="FALSE" OPTIONAL="TRUE"> <Display> <Label NLSID="tooltips0">This is tooltips 0 for ADA</Label> </Display> </InstanceProperty> <!--This property specifies the relative picture path under the servlet for the first charting pictyre.--> <InstanceProperty NAME="PicPath0" CREDENTIAL="FALSE" OPTIONAL="TRUE"> <Display> <Label NLSID="picpath0">Picture Path 0</Label> </Display> </InstanceProperty> <!--This property specifies the physical path for the first charting picture. The admin code will test if the file exists according to the path below--> <InstanceProperty NAME="PicPhysicalPath0" CREDENTIAL="FALSE" OPTIONAL="TRUE"> <Display> <Label NLSID="picphysicalpath0">Picture Physical Path 0</Label> </Display> </InstanceProperty>
To increase the number of charts displayed, change the value of the totalNumberOfStats
parameter in the targets.xml
file accordingly, and the additional picture properties must be defined using the following naming standard:
Title[N], ToolTips[N], PicPath[N], PicPhysicalPath[N]
Where:
N
is a non-negative natural number.
Edit the targets.xml
file to specify the property instance values, by adding the following properties to the specific target section in $ORACLE_HOME/sysman/emd/targets.xml
file:
<Property NAME="totalNumberOfStats" VALUE="1"/> <Property NAME="ToolTips0" VALUE="My First Statistic Tool Tips"/> <Property NAME="PicPhysicalPath0" VALUE="<…>/sysman/webapps/emd/ias/umsg/es/images/pic1.gif"/> <Property NAME="PicPath0" VALUE="/emd/ias/umsg/es/images/pic1.gif"/> <Property NAME="Title0" VALUE="My First Statistic Header"/>
In the preceding example, the ...es/images...
portion of the directory does not exist. It must be created or the administrator can choose another directory.
If any of the following situations occur, the charting picture is skipped and not displayed in Oracle Enterprise Manager:
totalNumberOfStats
is missing, zero, or not a number
Title[N]
is missing for the particular chart
ToolTips[N]
is missing for the particular chart
PicPath[N]
is missing for the particular chart
PicPhysicalPath[N]
is missing for the particular chart
The picture file specified under PicPhysicalPath[N]
does not exist