Skip Headers
Oracle® Enterprise Manager System Monitoring Plug-in Installation Guide for Microsoft SQL Server
Release 6 (3.2.3.1.0)

Part Number E11225-02
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Feedback page
Contact Us

Go to previous page
Previous
PDF · Mobi · ePub

Oracle® Enterprise Manager

System Monitoring Plug-in Installation Guide for Microsoft SQL Server

Release 6 (3.2.3.1.0)

E11225-02

February 2008

This document provides a brief description about the Oracle System Monitoring Plug-in for Microsoft SQL Server, details on the versions the plug-in supports, prerequisites for installing the plug-in, and step-by-step instructions on how to download, install, verify, and validate the plug-in.

Description

The System Monitoring Plug-in for Microsoft SQL Server extends Oracle Enterprise Manager Grid Control to add support for managing Microsoft SQL Server instances. By deploying the plug-in within your Grid Control environment, you gain the following management features:

Versions Supported

This plug-in supports the following versions of products:

Prerequisites

The following prerequisites must be met before you can deploy the plug-in:

Deploying the Plug-in

After you ensure that the prerequisites are met, follow these steps to deploy the plug-in:

  1. Download the SQL Server Plug-in archive to your desktop or computer on which the browser is launched. You can download the archive from the Oracle Technology Network (OTN).

  2. Log into Enterprise Manager Grid Control as a Super Administrator.

  3. Click the Setup link in the upper right corner of the Grid Control Home page, then click the Management Plug-ins link on the left side of the Setup page.

  4. Click Import.

  5. Click Browse and select the plug-in archive.

  6. Click List Archive.

  7. Select the plug-in and click OK.

  8. Verify that you have set preferred credentials on all Agents where you want to deploy the plug-in.

  9. In the Management Plug-ins page, click the icon in the Deploy column for the SQL Server plug-in. The Deploy Management Plug-in wizard appears.

  10. Click Add Agents, then select one or more Agents to which you want to deploy the plug-in. The wizard reappears and displays the Agent you selected.

  11. Click Next, then click Finish.

    If you see an error message stating that the preferred credential is not set up, go to the Preferences page and add the preferred credentials for the Agent target type.

    If there are no errors, then you will see the following screen:

    Figure 1 Successful Deployment

    Successful Deployment
  12. To check the deployment status, go to Related Links and click the link Deployment Status.

TCP/IP Port Information

The following sections provide information you require to enable the TCP/IP port and to find the TCP/IP port for a particular SQL server instance.

Enabling TCP/IP Port

For SQL Server 2000

  1. From the SQL Server Enterprise Manager, right-click the SQL Server instance in the left panel and select Properties. SQL Server Properties dialog box appears.

  2. In General tab, click Network Configuration. The SQL Server Network Utility dialog box appears.

  3. Ensure that TCP/IP is listed in the Enabled protocols list.

For SQL Server 2005

  1. From the SQL Server Configuration Manager, select SQL Server 2005 Network Configuration in the left panel and navigate to the SQL Server instance.

    The right panel displays all protocols for the specified SQL Server instance and their status.

  2. Ensure that TCP/IP is enabled.

  3. (If TCP/IP is disabled), right-click TCP/IP and select Properties. The TCP/IP Properties dialog box appears.

  4. In the Protocol tab, select enabled, and click Apply.

  5. Restart the SQL Server instance.

Finding TCP/IP Port

To find the TCP/IP port number for a particular SQL Server instance, in the registry editor, navigate to:

  • (Non-default SQL Server instance) HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\<Instance Name>\MSSQLServer\SuperSocketNetLib\Tcp

  • (Default SQL Server instance) HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQL Server\MSSQLServer\SuperSocketNetLib\Tcp

The TCP Port provides the port number.

Adding Instances for Monitoring

After successfully deploying the plug-in, follow these steps to add the plug-in target to Grid Control for central monitoring and management:

  1. From the Agent home page where the plug-in was deployed, select the Microsoft SQL Server target type from the Add drop-down list, then click Go. The Add Microsoft SQL Server page appears.

  2. Provide the following information for the properties:

    • Name — Unique target name across all the Grid Control targets, such as SqlServer2k_Hostname. This is the display name in the Grid Control. It represents this SQL Server target across all user interfaces within Grid Control.

    • JDBC URL — URL for JDBC. The default port is 1433.

      For example,

      jdbc:sqlserver://<host>:<port> 
      
    • JDBC Driver — (Optional) SQL+Driver JDBC driver class name.

      For example,

      com.microsoft.sqlserver.jdbc.SQLServerDriver
      
    • Database Username — Valid user for the database in sysadmin fixed server role.

    • Password for the Database User — Corresponding password for the database user

    • System Username — Valid host user name. Required only for remote Agent monitoring. For more information, see "Configuring Remote Connections to Monitor Targets".

    • System Password — Password for the Username. Required only for remote Agent monitoring.

    • Role — (Optional)

  3. Click Test Connection to make sure the parameters you entered are correct.

  4. Reenter the encrypted parameters from step 2 if the connection test was successful, then click OK.

    Figure 2 Add Microsoft SQL Server

    Add Microsoft SQL Server

Important:

If you do not reenter the encrypted parameters before clicking OK, you might encounter an error suggesting that the login failed.

After you deploy and configure the plug-in to monitor one or more targets in the environment, you can customize the monitoring settings of the plug-in. This alters the collection intervals and threshold settings of the metrics to meet the particular needs of your environment. If you decide to disable one or more metric collections, this could impact the reports that the metric is a part of.

Verifying and Validating the Plug-in

After waiting a few minutes for the plug-in to start collecting data, use the following steps to verify and validate that Enterprise Manager is properly monitoring the plug-in target:

  1. Click the SQL Server target link from the Agent home page Monitored Targets table.

    The Microsoft SQL Server home page appears.

    Figure 3 Microsoft SQL Server Home Page

    Surrounding text describes Figure 3 .
  2. Verify that no metric collection errors are reported in the Metrics table.

  3. Ensure that reports can be seen and no errors are reported by clicking the Reports property page.

  4. Ensure that configuration data can be seen by clicking the View Configuration link in the Configuration section. If configuration data does not immediately appear, click Refresh in the View Configuration page.

Upgrading the Plug-in

Follow these steps to upgrade the plug-in:

  1. Download the SQL Server Plug-in archive to your desktop or computer on which the browser is launched. You can download the archive from the Oracle Technology Network (OTN).

  2. Log into Enterprise Manager Grid Control as a Super Administrator.

  3. Click the Setup link in the upper right corner of the Grid Control Home page, then click the Management Plug-ins link on the left side of the Setup page.

  4. Click Import.

  5. Click Browse and select the plug-in archive that you have downloaded for upgrading.

  6. Click List Archive.

  7. Select the plug-in and click OK.

  8. Verify that preferred credentials are set on all Agents to which you want to deploy the plug-in.

  9. Blackout the Microsoft SQL Server targets for agents to which you want to deploy higher version of the plug-in. Ensure that you select immediate blackout.

  10. In the Management Plug-ins page, click the icon in the Deploy column for the SQL Server plug-in. The Deploy Management Plug-in wizard appears.

  11. Click Add Agents, then select one or more Agents to which you want to deploy the plug-in. The wizard reappears and displays the Agent you selected.

  12. Click Next, then click Finish.

    If you see an error message stating that the preferred credential is not set up, go to the Preferences page and add the preferred credentials for the Agent target type.

  13. Remove blackout for the targets (required only if Step 9 applies).

Undeploying the Plug-in

Follow these steps to undeploy the plug-in from an Agent:

  1. Log in to Enterprise Manager Grid Control as a Super Administrator.

  2. Select the Targets tab, then the All Targets subtab. The All Targets page appears.

  3. Select the Microsoft SQL Server Plug-in target and click Remove. You must do this step for all targets of the plug-in.

  4. Make sure that the preferred credentials are set on the Agents where the plug-in is deployed.

  5. Click the Setup link in the upper right corner of the All Targets page, then click the Management Plug-ins link on the left side of the Setup page. The Management Plug-ins page appears.

  6. Click the icon in the Undeploy column for the Microsoft SQL Server Plug-in. The Undeploy Management Plug-in page appears.

  7. Check all the Agents that are currently deployed with the Microsoft SQL Server Plug-in and click OK.

    You must undeploy the plug-in from every Agent in the system to completely remove it from the enterprise.

  8. Select the Microsoft SQL Server Plug-in on the Management Plug-in page and click Delete.

Configuring Connections

This section provides details about configuring connections for monitoring targets and executing jobs.

Configuring Remote Connections to Monitor Targets

If you want to monitor targets using remote Agents, then Oracle recommends that you do the following security configurations on every system where SQL Server target resides.

  • Set WMI namespace security (Refer to the 'Modifying Windows Management Instrumentation Control Permissions' section of the Oracle Enterprise Manager System Monitoring Plug-in Troubleshooting Guide.)

  • Restrict access to the registry from a remote computer (Refer to the 'Modifying Registry Permissions' section of the Oracle Enterprise Manager System Monitoring Plug-in Troubleshooting Guide.)

  • Set DCOM Security to allow user to access a computer remotely (Refer to the 'Modifying DCOM Remote Access Permissions' section of the Oracle Enterprise Manager System Monitoring Plug-in Troubleshooting Guide.)

Configuring Connections to Execute Jobs

If you want to execute jobs using local or remote Agents, then Oracle recommends that you do the following security configurations on every system where SQL Server target resides.

  • Set WMI namespace security (Refer to the 'Modifying Windows Management Instrumentation Control Permissions' section of the Oracle Enterprise Manager System Monitoring Plug-in Troubleshooting Guide.)

  • Set DCOM Security to allow user to access a computer remotely (Refer to the 'Modifying DCOM Remote Access Permissions' section of the Oracle Enterprise Manager System Monitoring Plug-in Troubleshooting Guide.)

For configuration details, refer to the following:

Creating and Editing Jobs

To create and edit jobs, follow these steps:

  1. In Grid Control, click the Jobs tab. Grid Control displays the Job Activity page.

  2. Select a job type from the Create Job menu and click Go.

    You can select one of these:

    • Microsoft SQL Server and/or SQL Agent Start

    • Microsoft SQL Server and/or SQL Agent Stop

    • Microsoft SQL Server Pause or Resume

    Note:

    If you want to edit a job, then select an existing job from the list and click Edit.
  3. In the General tab of the Create <Job Type> Job page, provide a name for the job and add the individual targets or one composite target such as a Group.

    Note:

    If you are editing a job, then modify the job name and the selected targets.
  4. In the Parameters tab of the Create <Job Type> Job page, from the Options menu, select an appropriate option to make the job function accordingly when it starts.

    You can select one of these options:

    Table 1 Job Parameters Options

    Job Type Available Options

    Microsoft SQL Server and/or SQL Agent Start

    • Start SQL Server and SQL Server Agent services

      (You will select this option when both, SQL Server and SQL Server Agent, are stopped or when SQL Server is running but the SQL Server Agent is stopped)

    • Start SQL Server service

      (You will select this option when both, SQL Server and SQL Server Agent, are stopped and if you want to start only the SQL Sever)

    Microsoft SQL Server and/or SQL Agent Stop

    • Stop SQL Server and SQL Server Agent services

      (You will select this option when both, SQL Server and SQL Server Agent, are running, when SQL Server is paused but the SQL Server Agent is running, when SQL Server is running/paused but the SQL Server Agent is stopped)

    • Stop SQL Server Agent service

      (You will select this option when you want to stop a running SQL Server Agent)

    Microsoft SQL Server Pause or Resume

    • Pause SQL Server service

      (You will select this option when you want to pause a running SQL Server)

    • Resume SQL Server service

      (You will select this option when you want to resume a paused SQL Server)


    Grid Control starts the SQL server and agent services according to the selection made.

    Note:

    If you are editing a job, then modify the options for that job.
  5. In the Credentials tab of the Create <Job Type> Job page, select an appropriate option for credentials.

    You can choose to use the preferred credentials that are already set or override the preferred credentials with new credentials. In either case, you need to provide the credetials for agent host and database host.

    To set the preferred credentials, click Preferences at the top-right corner of the Grid Control console. From the left-vertical navigation bar, click Preferred Credentials. Grid Control displays the Preferred Credentials page. On this page, you can set the preferred credentials

    Note:

    If you are editing a job, then modify the credentials set for that job.
  6. In the Schedule tab of the Create <Job Type> Job page, schedule the job.

    Note:

    If you are editing a job, then modify the schedule prepared for that job.
  7. In the Access tab of the Create <Job Type> Job page, define or modify the access you want other users to have to this job.

    Note:

    If you want to edit, then modify the access levels for that job.
  8. Click Submit to create the job.

Troubleshooting the Plug-In

To resolve various issues that you might encounter while using the plug-in, see the Oracle Enterprise Manager System Monitoring Plug-in Troubleshooting Guide available at the following URL:

http://www.oracle.com/technology/documentation/oem.html

Documentation Accessibility

Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at http://www.oracle.com/accessibility/.

Accessibility of Code Examples in Documentation

Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

TTY Access to Oracle Support Services

Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, seven days a week. For TTY support, call 800.446.2398.


System Monitoring Plug-in Installation Guide for Microsoft SQL Server, Release 6 (3.2.3.1.0)

E11225-02

Copyright © 2008 Oracle. All rights reserved.

The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited.

The information contained in this document is subject to change without notice. If you find any problems in the documentation, please report them to us in writing. This document is not warranted to be error-free. Except as may be expressly permitted in your license agreement for these Programs, no part of these Programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose.

If the Programs are delivered to the United States Government or anyone licensing or using the Programs on behalf of the United States Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the Programs, including documentation and technical data, shall be subject to the licensing restrictions set forth in the applicable Oracle license agreement, and, to the extent applicable, the additional rights set forth in FAR 52.227-19, Commercial Computer Software--Restricted Rights (June 1987). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065

The Programs are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently dangerous applications. It shall be the licensee's responsibility to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of such applications if the Programs are used for such purposes, and we disclaim liability for any damages caused by such use of the Programs.

Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

The Programs may provide links to Web sites and access to content, products, and services from third parties. Oracle is not responsible for the availability of, or any content provided on, third-party Web sites. You bear all risks associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is directly between you and the third party. Oracle is not responsible for: (a) the quality of third-party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services. Oracle is not responsible for any loss or damage of any sort that you may incur from dealing with any third party.