This chapter outlines the steps needed to configure the Oracle Integrating Server for a gateway using the SNA protocol on the Microsoft Windows platform. It also shows you how to configure commit-confirm, should you choose to implement it.
This chapter also provides the steps necessary to verify installation and configuration of the gateway components, including optional commit-confirm. It contains the following sections:
Integrating Server Configuration: First-Time Gateway Installations
Upgrading or Migrating the Oracle Server from Previous Gateways
Configuring the Oracle Integrating Server for Gateways to Coexist
Configuring the Oracle Procedural Gateway for APPC using SNA involves working with the following components:
the Oracle Integrating Server
your Microsoft Windows system
your network
the OLTP
This chapter requires you to input parameters unique to your system in order to properly configure the gateway and SNA communications interface.
Refer to Appendix E, "Configuration Worksheet" for a worksheet listing the installation parameters you will need to know before you can complete the configuration process. Ask your network administrator to provide you with these unique parameter names before you begin.
There are three ways to establish the gateway-Oracle Integrating Server relationship when you are installing or upgrading/migrating the gateway:
Depending on the location of your gateway and your Oracle Integrating Server, you may need to transfer some of the gateway administrative files to the location where your Oracle Integrating Server is installed.
Follow the instructions suitable to your combination of the gateway-Oracle Integrating Server locations listed below.
When the Oracle Integrating Server and the gateway are installed in the same ORACLE_HOME on the same machine
You do not need to transfer files. Proceed to "Integrating Server Configuration: First-Time Gateway Installations".
When the Oracle Integrating Server and the gateway are installed on separate machine
Locate the gateway administrative files in the gateway %ORACLE_HOME%\pg4appc\admin directory. All files in this directory that have the suffix .sql, .pkh, and .pkb must be copied into a similarly-named directory in the Oracle Integrating Server's Oracle home directory.
Now, locate the gateway demo files and subdirectories in the gateway's %ORACLE_HOME%\pg4appc\demo directory. Copy the pgavsn.sql and pgaecho.sql files into a similarly named directory in the Oracle Integrating Server.
Copy the other subdirectories and files related to your installed OLTP on your remote host. For example, if you have CICS as your only OLTP, then copy the gateway %ORACLE_HOME%\pg4appc\demo\CICS files into a similarly named directory in the Oracle Integrating Server.
Note:
Before transferring the files from the %ORACLE_HOME%\pg4appc\demo directory, make sure that you have generated your required TIPs. You need to transfer the TIPs as well.Refer to the Oracle Procedural Gateway for APPC User's Guide for information about generating TIPs using PGAU.
When the Oracle Integrating Server and the gateway are on the same machine but in different directories
You must change your gateway's Oracle home to the Oracle Integrating Server's Oracle home directory.
For example, if your gateway's Oracle home is set as follows:
C:\> echo %ORACLE_HOME% C:\oracle\pga\10.2
and your server's Oracle home is located in the \oracle\pga\10.2 directory, then you need to do the following:
C:\> SET ORACLE_HOME=C:\oracle\pga\10.2
Now create the directories with the following commands:
C:\> cd %ORACLE_HOME% C:\> mkdir pg4appc C:\> mkdir pg4appc\admin
Use whatever file transfer mechanism is available on your system to copy all the .sql, .pkh, and .pkb files from the gateway Oracle home %ORACLE_HOME%\pg4appc\admin directory to the Oracle Integrating Server's Oracle home %ORACLE_HOME%\pg4appc\admin directory.
You may also transfer the demo files from the gateway directory to the Oracle Integrating Server directory. Copy the files and the directory recursively from the gateway Oracle home %ORACLE_HOME%\pg4appc\demo directory to the Oracle Integrating Server %ORACLE_HOME%\pg4appc\demo directory.
For example:
C:\> cd %ORACLE_HOME%\pg4appc C:\> mkdir\demo C:\> cd demo C:\> xcopy C:\oracle\pga\10.2\demo /E /I /Q
Note:
Before transferring the files from the %ORACLE_HOME%\pg4appc\demo directory, make sure that you have generated the required TIPs. You need to transfer the TIPs as well.Refer to the Oracle Procedural Gateway for APPC User's Guide for information about generating TIPs using PGAU.
If this is a first-time installation, then proceed with "Integrating Server Configuration: First-Time Gateway Installations".
If this is an upgrade, then proceed with "Upgrading or Migrating the Oracle Server from Previous Gateways".
Following those steps, you may want to perform the Optional Configuration Steps to Permit Multiple Users,.
Follow these steps to configure your Oracle Integrating Server if you have installed Oracle Procedural Gateway for APPC for the first time:
Ensure that the UTL_RAW
PL/SQL package has been installed on your Oracle Integrating Server. All PGAU-generated TIP specifications use UTL_RAW
, which provides routines for manipulating raw data.
Use SQL*Plus to connect to the Oracle Integrating Server as user SYS.
From SQL*Plus, enter the following command:
SQL> DESCRIBE UTL_RAW
The DESCRIBE
statement produces output on your screen. If you browse through the output, then you should see some functions, including a compare function. If you do not see this output, then continue the UTL_RAW installation by performing Step d below.
If the DESCRIBE
statement indicates success, then your Oracle Integrating Server has UTL_RAW
installed and you can proceed to Step 2.
Use SQL*Plus to connect to the Oracle Integrating Server as user SYS.
From SQL*Plus, run the utlraw.sql and prvtrawb.plb scripts in the Oracle Integrating Server's %ORACLE_HOME%\rdbms\admin directory, in the following order:
C:\> cd %ORACLE_HOME%\rdbms\admin SQL> @utlraw.sql SQL> @prvtrawb.plb
Ensure that the DBMS_OUTPUT
standard PL/SQL package is enabled on your Oracle Integrating Server. The sample programs and installation verification programs on the distribution media use this standard package.
If necessary, then use SQL*Plus to connect to the Oracle Integrating Server as user SYS.
From SQL*Plus, enter the following command:
SQL> DESCRIBE DBMS_OUTPUT
The DESCRIBE
statement produces output on your screen. If you browse through that output, you should see some functions, including a put_line function.
If you do not see this output, then you must create the DBMS_OUTPUT
package. Refer to the Oracle Database Application Developer's Guide - Fundamentals for more information about creating the DBMS_OUTPUT
package. After successful installation of the DBMS_OUTPUT
package, issue the DESCRIBE
statement.
If the DESCRIBE
statement indicates success, then your Oracle Integrating Server has DBMS_OUTPUT
created, and you can proceed to Step 3.
Install the UTL_PG
PL/SQL package. All PGAU-generated TIP specifications use UTL_PG
, which provides routines for performing numeric conversions to and from raw data.
If necessary, then use SQL*Plus to connect to the Oracle Integrating Server as user SYS.
From SQL*Plus, run the utlpg.sql and prvtpgb.plb scripts in the Oracle Integrating Server's %ORACLE_HOME%\rdbms\admin directory, in the following order:
C:\> cd %ORACLE_HOME%\rdbms\admin SQL> @utlpg.sql SQL> @prvtpgb.plb
Install the Heterogeneous Services (HS) catalogs.
If necessary, use SQL*Plus to connect to the Oracle Integrating Server as user SYS.
Enter the following command:
SQL> DESCRIBE HS_FDS_CLASS
The DESCRIBE statement produces output on your screen. If the DESCRIBE
statement indicates success, then heterogeneous services catalogs have been created on your Oracle Integrating Server and you can proceed to Step 5. otherwise follow the next step only if the DESCRIBE
statement does not indicate success. Step c will create the Heterogeneous Services catalog.
Create a public database link to access Oracle Procedural Gateway for APPC:
Use SQL*Plus to connect to the Oracle Integrating Server as user SYSTEM. You can use the following SQL*Plus sample whether the Oracle Integrating Server and the gateway are on the same system or on different systems. In the following sample, pgasrv
is the tns_name_entry
that will be assigned to the gateway when you modify the tnsnames.ora file later in this chapter.
SQL> CREATE PUBLIC DATABASE LINK PGA USING 'PGASRV'
Create the gateway administrator user PGAADMIN and install the PG DD.
Use SQL*Plus to connect to the Oracle Integrating Server as user SYSTEM.
From SQL*Plus, run the pgacr8au.sql script in the %ORACLE_HOME%\pg4appc\admin directory. This script creates the PGAADMIN user ID.
The initial password defined for PGAADMIN is PGAADMIN. Use the ALTER USER
command to change the password. For further information about password issues, refer to the Oracle Database SQL Reference.
C:\> cd %ORACLE_HOME%\pg4appc\admin SQL> @pgacr8au.sql
Use SQL*Plus to connect to the Oracle Integrating Server as user PGAADMIN.
From SQL*Plus, run the pgddcr8.sql script in the %ORACLE_HOME%\pg4appc\admin directory. This script installs the PG DD.
C:\> cd %ORACLE_HOME%\pg4appc\admin SQL> @pgddcr8.sql
From SQL*Plus, connect to the Oracle Integrating Server as user SYS.
Grant execution privileges on DBMS_PIPE to PGAADMIN:
SQL> GRANT EXECUTE ON DBMS_PIPE TO PGAADMIN
Install the TIP trace access PL/SQL routines. These routines require that the DBMS_PIPES standard PL/SQL package is installed and that PGAADMIN has execute privileges on it. For more information on DBMS_PIPES, refer to the Oracle Database Application Developer's Guide - Fundamentals.
If necessary, then use SQL*Plus to connect to the Oracle Integrating Server as user PGAADMIN.
From SQL*Plus, run the pgatiptr.sql script in the %ORACLE_HOME%\pg4appc\admin directory. This script creates PL/SQL routines that can be called to read and purge trace information created by PGAU-generated TIP specifications. It also creates public synonyms for these routines. The script prompts you for the necessary user IDs and passwords.
C:\> cd %ORACLE_HOME%\pg4appc\admin SQL> @pgatiptr.sql
Install the GPGLOCAL
package. This package is required for compilation and execution of all PGAU-generated TIP specifications. TIP developers should be granted execute privileges on GPGLOCAL
(refer to Step 3 of "Optional Configuration Steps to Permit Multiple Users").
Use SQL*Plus to connect to the Oracle Integrating Server as user PGAADMIN.
From SQL*Plus, run the gpglocal.pkh script in the %ORACLE_HOME%\pg4appc\admin directory. This script compiles the GPGLOCAL
package specification.
C:\> cd %ORACLE_HOME%\pg4appc\admin SQL> @gpglocal.pkh
From SQL*Plus, run the gpglocal.pkb script in the %ORACLE_HOME%\pg4appc\admin directory. This script compiles the GPGLOCAL
package body.
C:\> cd %ORACLE_HOME%\pg4appc\admin SQL> @gpglocal.pkb
Follow these instructions only if you have a previous version of the Oracle Procedural Gateway for APPC installed on your system and need to configure it for Release 10.2.0.1.0 of the gateway.
Upgrade your Oracle Procedural Gateway for APPC to current version levels as follows:
Use SQL*Plus to connect to the Oracle Integrating Server as user SYS.
Install the UTL_RAW
package body. From SQL*Plus, run the prvtrawb.plb script from the %ORACLE_HOME%\rdbms\admin directory. This script upgrades the UTL_RAW
package body.
C:\> cd %ORACLE_HOME%\rdbms\admin SQL> @prvtrawb.plb
Install the UTL_PG
package body. From SQL*Plus, run the prvtpgb.plb script from the %ORACLE_HOME%\rdbms\admin directory. This script upgrades the UTL_PG
package body.
C:\> cd %ORACLE_HOME%\rdbms\admin SQL> @prvtpgb.plb
The prvtrawb.plb and prvtpgb.plb scripts should complete successfully. If they fail because specifications do not exist or were invalidated, then consider reinstalling the package specifications as directed in Section 9.4.1, "If You Must Reinstall Package Specifications".
If the UTL_RAW
or UTL_PG
package has been invalidated or removed, then the prvtrawb.plb and prvtpgb.plb scripts may not complete successfully, then, you might have to reinstall the package specifications.
If you do reinstall the package specifications, then any dependent objects (such as existing user TIPs and client applications) are invalidated and will subsequently need to be recompiled. The impact of this is a one-time performance delay while recompilation of the TIPs and dependent client applications proceeds.
Important:
Before proceeding with reinstallation of the package scripts, make sure that you are in the %ORACLE_HOME%\pg4appc\admin directory.TIPs were split into separate specification and body files in release 3.3 to avoid cascaded recompilations in later releases.
Step 1 Run the following scripts before proceeding with the PGAU upgrade
From SQL*Plus, run the utlraw.sql script:
If necessary, then use SQL*Plus to connect to the Oracle Integrating Server as user SYS.
From SQL*Plus, run the utlraw.sql and utlpg.sql scripts in the Oracle Integrating Server %ORACLE_HOME%\rdbms\admin directory, in the following order, to upgrade their respective package specifications:
C:\> cd %ORACLE_HOME%\rdbms\admin SQL> @utlraw.sql SQL> @utlpg.sql
Step 2 Repeat installation of UTL_RAW and UTL_PG package body
After the scripts have run, repeat Steps 1b and c in Section 9.4, "Upgrading or Migrating the Oracle Server from Previous Gateways". Then, proceed to the section titled "Upgrading PGAU from Previous Gateway Releases".
Note:
TIPs and dependent client applications must be recompiled after reinstallation of the package specifications. Refer to the "Compiling a TIP" section in Chapter 3 of the Oracle Procedural Gateway for APPC User's Guide for Microsoft Windows for information about compiling TIPs.You may have an older version of the gateway already installed. Be aware that although a version 10 gateway can communicate with a version 9 data dictionary (PG DD), a version 9 gateway cannot communicate with a version 10 data dictionary. So, if you upgrade your data dictionary to version 10, no gateways which were configured with a version 9 data dictionary will be able to communicate with it.
The following configuration steps are optional. Perform these steps if you want to permit users other than PGAADMIN to perform PG DD operations using PGAU.
Create public synonyms for the PG DD to allow other users to access the tables:
Create roles for accessing the PG DD, performing definitions of transactions, and generating TIP specifications. The PGAADMIN user can grant these roles to other users as necessary.
Use SQL*Plus to connect to the Oracle Integrating Server as user PGAADMIN.
From SQL*Plus, run the pgddcr8r.sql script in the %ORACLE_HOME%\pg4appc\admin directory. This script creates two roles, PGDDDEF and PGDDGEN. The PGDDDEF role provides SELECT
, INSERT
, UPDATE
, and DELETE
privileges against some of the PG DD tables, and select privileges against others, and allows execution of the PGAU
DEFINE
, GENERATE
, REDEFINE
, REPORT
, and UNDEFINE
statements. The PGDDGEN role provides select privileges against the PG DD tables, and allows execution of the PGAU
GENERATE
and REPORT
statements only.
C:\> cd %ORACLE_HOME%\pg4appc\admin SQL> @pgddcr8r.sql
Grant access to PGA required packages.
TIP developers require access to the following PL/SQL packages, which are shipped with the Oracle Integrating Server:
Explicit grants to execute these packages must be made to TIP developers.
These grants can be private, as in the following example:
C:\> sqlplus SYS\pw@database_specification_string SQL> GRANT EXECUTE ON UTL_RAW TO tip_developer; SQL> GRANT EXECUTE ON UTL_PG TO tip_developer; SQL> GRANT EXECUTE ON DBMS_PIPE TO tip_developer; SQL> CONNECT PGAADMIN\pw@database_specification_string SQL> GRANT EXECUTE ON PGAADMIN.PURGE_TRACE TO tip_developer; SQL> GRANT EXECUTE ON PGAADMIN.READ_TRACE TO tip_developer; SQL> GRANT EXECUTE ON PGAADMIN.GPGLOCAL TO tip_developer; SQL> exit
Alternatively, these grants can be public, as in the following example:
C:\> sqlplus SYS\pw@database_specification_string SQL> GRANT EXECUTE ON UTL_RAW TO PUBLIC; SQL> GRANT EXECUTE ON UTL_PG TO PUBLIC; SQL> GRANT EXECUTE ON DBMS_PIPE to PUBLIC; SQL> CONNECT PGAADMIN\pw@database_specification_string SQL> GRANT EXECUTE ON PGAADMIN.PURGE_TRACE TO PUBLIC; SQL> GRANT EXECUTE ON PGAADMIN.READ_TRACE TO PUBLIC; SQL> GRANT EXECUTE ON PGAADMIN.GPGLOCAL TO PUBLIC; SQL> EXIT
You can use either private or public grants. Both grants are sufficient for using PGA. Public grants are easier and can be performed now. If you use private grants, then they must be issued each time a new TIP developer user ID is created.
SQL scripts for performing these grants are provided in the %ORACLE_HOME%\pg4appc\admin directory. The pgddapub.sql script performs these grants for public access to the packages. The pgddadev.sql script performs the grants for private access to the packages by a single TIP developer. If you are going to use private grants, then you must run the pgddadev.sql script once for each TIP developer's user ID:
Use SQL*Plus to connect to the Oracle Integrating Server as user PGAADMIN.
From SQL*Plus, run the suitable script (pgddapub.sql or pgddadev.sql) from the %ORACLE_HOME%\pg4appc\admin directory. The script performs the necessary grants as described earlier. You are prompted for the required user IDs, passwords, and database specification strings.
If you are using private grants, then repeat this step for each user ID requiring access to the packages.
or
SQL> @pgddadev.sql
If you are upgrading from a previous release of the gateway and if you want to upgrade your existing TIPs with new function and maintenance, then regenerate existing TIP specifications using the PGAU
GENERATE
statement.
Note:
The Procedural Gateway Administrative Utility (PGAU) has been enhanced to automatically upgrade existing PG DD entries with a new attribute when aPGAU
GENERATE
command is executed. To support this enhancement, add a new privilege to the PGDDGEN role. To do this, as the PGAADMIN user, use SQL*Plus to connect to the Oracle Integrating Server where the PG DD is stored. Then issue the following SQL command:
SQL> GRANT INSERT ON PGA_DATA_VALUES TO PGDDGEN
Call PGAU in the directory path where the PGAU control files are generated and where TIPs are stored:
C:\> pgau PGAU> CONNECT PGAADMIN\pgaadmin@database_specification_string PGAU> GENERATE tranname PGAU> EXIT
For more information about the GENERATE
command, refer to the PGAU
GENERATE
command section in Chapter 2 of the Oracle Procedural Gateway for APPC User's Guide for Microsoft Windows.
Note that it is not necessary to define the PG DD entries again.
Call SQL*Plus in the same directory path where the newly-generated TIP specifications are stored.
C:\> sqlplus tip_owner\pw@database_specification_string SQL> @tipname.pkh SQL> @tipname.pkb SQL> exit
PGAU
GENERATE
produces the TIP in two output file, a specification and a body. You must compile both, first the specification and then the body.
For more information about the GENERATE
command, refer to the PGAU
GENERATE
command section in Chapter 2 of the Oracle Procedural Gateway for APPC User's Guide.
To configure the gateway, perform the following steps:
Tailor the Oracle Procedural Gateway for APPC parameters.
Parameters specific to the gateway are supplied in the gateway parameter file, initsid.ora, which is in the %ORACLE_HOME%\pg4appc\admin directory. A sample gateway parameter file, initPGA.ora, is provided in this subdirectory.
Note:
In the initsid.ora file, substitute your pg4appc SID name for "sid
" in this file name.
The initsid.ora file contains both APPC and TCP/IP parameters, separated by a description. You must modify the initsid.ora file by deleting the TCP/IP parameters. Refer to Appendix A, "Gateway Initialization Parameters for SNA Protocol" for the valid APPC parameters.
The parameters fall into two categories:
gateway initialization parameters
These parameters control the general operation of the gateway in the Oracle environment.
Important:
Before performing the following step, refer to Appendix A, "Gateway Initialization Parameters for SNA Protocol" for information about tailoring gateway initialization and PGA parameters. Pay special attention to the information about using thePGA_CAPABILITY
parameter.PGA parameters control the APPC interface portion of the gateway. Use the SET
gateway initialization parameter to specify PGA parameters. Oracle recommends that you group all SET
commands for PGA parameters at the end of the initsid.ora file.
Note:
Misspelled parameters are ignored. However, if the %ORACLE_HOME%\pg4appc\admin\initsid.ora file is missing, then all calls to the gateway fail and return a PGA-20928 error.If you do not plan to configure commit-confirm, then proceed to"Verifying the Gateway Installation and OLTP Configuration".
Note:
If you are planning to implement commit-confirm, then read the detailed explanation of commit-confirm capabilities in Chapter 5 of the Oracle Procedural Gateway for APPC User's Guide for Microsoft Windows, "Implementing Commit-Confirm (SNA Only) before proceeding.Follow these steps to configure the commit-confirm components.
The steps for configuring commit-confirm include:
configuring the Oracle Integrating Server where the gateway server will store its transaction log information
configuring the gateway initialization parameters, and
configuring the OLTP.
All these steps must be performed before attempting to use any application that uses commit-confirm.
The Oracle Integrating Server where the gateway server will store its transaction log information should ideally be on the same system where the gateway runs. The configuration of the server consists of creating the gateway DBA user, creating the commit-confirm log tables and creating the PL/SQL stored procedure used by the gateway server for logging transactions.
The pgaccau.sql script from the %ORACLE_HOME%\pg4appc\admin directory creates the gateway DBA user ID. The default user ID is PGADBA with the initial password set to PGADBA. If you want to change the user ID or initial password, you must modify the script.
Use SQL*Plus to connect to the Oracle Integrating Server as user SYSTEM.
From SQL*Plus, run the pgaccau.sql script from the %ORACLE_HOME%\pg4appc\admin directory. This script creates the gateway DBA user ID. If you want to change the password at any time after running this script, then you can use the ALTER USER
command to change the password. For further information, refer to the Oracle Database SQL Reference.
Use SQL*Plus to connect to the Oracle Integrating Server as user PGADBA.
From SQL*Plus, run the pgaccpnd.sql script from the %ORACLE_HOME%\pg4appc\admin directory. This script creates the PGA_CC_PENDING table used by the gateway server for its commit-confirm transaction log.
From SQL*Plus, run the pgacclog.sql script from the %ORACLE_HOME%\pg4appc\admin directory. This script creates the PGA_CC_LOG
PL/SQL stored procedure used by the gateway server for updating the PGA_CC_PENDING table.
Disconnect from the Oracle Integrating Server.
The gateway initialization parameters are described in Appendix A, "Gateway Initialization Parameters for SNA Protocol". The parameters necessary for commit-confirm support in the gateway are:
PGA_CAPABILITY
PGA_LOG_DB
PGA_LOG_USER
PGA_LOG_PASS
PGA_RECOVERY_USER
PGA_RECOVERY_PASS
PGA_RECOVERY_TPNAME
These parameters should be added to your initsid.ora file, where sid is the gateway SID for the commit-confirm gateway.
Refer to Appendix A, "Gateway Initialization Parameters for SNA Protocol" for full information about the gateway initialization parameters supported by the Oracle Procedural Gateway for APPC.
Configuration of the OLTP includes the following:
defining and installing the commit-confirm transaction log database
defining and installing the commit-confirm forget/recovery transaction
defining and installing the sample commit-confirm applications provided with the gateway.
Note:
A restart of the OLTP may be necessary to implement the changes required for commit-confirm support. You should plan for this with your OLTP system administrator.Detailed instructions for configuring the Transaction Server for z/OS and IMS/TM are provided in the %ORACLE_HOME%\pg4appc\demo\CICS\README.doc and %ORACLE_HOME%\pg4appc\demo\IMS\README.doc files, respectively.
Refer to "Implementing Commit-Confirm (SNA Only)" in the Oracle Procedural Gateway for APPC User's Guide for Microsoft Windowse for detailed information about commit-confirm.
You will take steps to verify configuration of commit-confirm later in this chapter, in Section 9.9.3, "Verifying OLTP Configuration for Commit-Confirm".
However, first proceed to Section 9.9 to verify the gateway installation.
To verify the gateway installation and the OLTP configuration, perform the following procedures after installing Oracle Procedural Gateway for APPC. In addition, if you chose to configure commit-confirm, then follow the steps to verify the OLTP configuration for commit-confirm.
Note:
If your database link name is not PGA, then modify the demonstration .sql files to give them the particular database link name that you created in Step 5 of "Integrating Server Configuration: First-Time Gateway Installations". You must modify the following .sql files:To verify the gateway software installation using the database link PGA previously created, perform the following steps:
Using SQL*Plus, connect to the Oracle Integrating Server as user PGAADMIN.
Run %ORACLE_HOME%\pg4appc\demo\pgavsn.sql.
C:\> cd %ORACLE_HOME%\pg4appc\demo SQL> @pgavsn.sql
The server version number banner appears at your terminal. You will receive the following output:
Oracle Procedural Gateway for APPC. Version 10.2.0.1.0 Fri Jun 3 13:12:49 2005 Copyright (c) Oracle Corporation 1979, 2005. All rights reserved.
PL/SQL procedure successfully completed.
Run %ORACLE_HOME%\pg4appc\demo\pgaecho.sql.
C:\> cd %ORACLE_HOME%\pg4appc\demo SQL> @pgaecho.sql
You will receive the following output:
==> Congratulations, your installation was successful. <==
The procedure for verifying the OLTP configuration varies, depending on which OLTP you are using and depending on the platform the OLTP is running on. CICS Transaction Server for z/OS, IMS/TM, APPC/MVS, IDMS-DC and z/OS are the currently supported OLTPs. Follow the instructions for verifying the installation.
Attention:
If you have not completed the file transfers detailed in "Preparing to Configure a Gateway Installation/Upgrade", then complete them now, before proceeding to the next step.If your OLTP is CICS Transaction Server for z/OS, then perform the following steps to verify the CICS configuration.
To verify that the FLIP transaction is installed correctly, log on to your CICS Transaction Server for z/OS and enter the following transaction, replacing FLIP
with the transaction ID you chose for FLIP when you configured your CICS Transaction Server for z/OS for the gateway:
FLIP THIS MESSAGE
The following output appears at your terminal:
EGASSEM SIHT PILF
From the Windows platform, modify the pgacics.sql file which resides at %ORACLE_HOME%\pg4appc\demo\CICS\pgacics.sql.
Customize the following three items used for accessing the gateway and the CICS Transaction Server for z/OS, as described in the comments at the beginning of the file:
Log on to the CICS Transaction Server for z/OS and enter this transaction, where name
is the name of the CONNECTION definition installed by the DFHCSDUP job you ran in the CICS configuration steps:
CEMT SET CONNECTION(name) ACQUIRED
This transaction activates the CICS connection to Windows.
Use SQL*Plus to connect to the Oracle Integrating Server as PGAADMIN.
C:\> cd %ORACLE_HOME%\pg4appc\demo\CICS SQL> @pgacics.sql
The following message appears:
==> Congratulations, your gateway is communicating with CICS <==
The CICS Transaction Server for z/OS installation verification is complete.
If the OLTP is IDMS-DC, then perform the following steps to verify the IDMS-DC configuration:
From the Microsoft Windows platform, modify the pgaidms.sql file, which resides at %ORACLE_HOME%\pg4appc\demo\IDMS\pgaidms.sql. Customize the following three items used for accessing the gateway and the IDMS-DC system, as described in the comments at the beginning of the file:
the IDMS-DC transaction ID
the side profile name
the logmode entry name
Using the IDMS-DC DCMT transaction, display the LU6.2 line to check that sessions have been started with your system. Enter the following command, where linename
is the name of the LINE defined for LU6.2 communications with your system:
DCMT DIS LINE linename
Each defined L-TERM/P-TERM should show a status of INSRV. Any other status indicates a problem with the IDMS-DC APPC interface.
Use SQL*Plus to connect to the Oracle Integrating Server as PGAADMIN.
C:\> cd %ORACLE_HOME%\pg4appc\demo\IDMS SQL> @$pgaidms.sql
The following message appears:
==> Congratulations, your gateway is communicating with IDMS-DC<==
The IDMS-DC installation verification is now complete.
If the OLTP is IMS/TM, then perform the following steps to verify the IMS/TM configuration:
To verify that the FLIP transaction is installed correctly, log on to the IMS/TM system and enter the following transaction, replacing FLIP
with the transaction ID you chose for FLIP
when you configured the IMS/TM system for the gateway:
FLIP THIS MESSAGE
The following output appears on the terminal:
EGASSEM SIHT PILF
From a Windows platform, modify the pgaims.sql file, which resides at
%ORACLE_HOME%\pg4appc\demo\IMS\pgaims.sql. Customize the following three items used for accessing the gateway and the IMS/TM system, as described in the comments at the beginning of the file:
the IMS/TM transaction ID
the side profile name
the logmode entry name
Use SQL*Plus to connect to the Oracle Integrating Server as PGAADMIN.
C:\> cd %ORACLE_HOME%\pg4appc\demo\IMS SQL> @pgaims.sql
The following message appears:
==> Congratulations, your gateway is communicating with IMS/TM <==
The IMS/TM installation verification is now complete.
If the OLTP is APPC/MVS, then perform the following steps to verify the APPC/MVS configuration:
Verify that the APPC/MVS subsystem is active.
From the Windows platform, modify the pgamvs.sql file, which resides at %ORACLE_HOME%\pg4appc\demo\MVS\pgamvs.sql. Customize the following three items used for accessing the gateway and the APPC/MVS system, as described in the comments at the beginning of the file:
the APPC/MVS transaction ID
the side profile name
the logmode entry name
Use SQL*Plus to connect to the Oracle Integrating Server as PGAADMIN.
Run pgamvs.sql.
C:\> cd %ORACLE_HOME%\pg4appc\demo\MVS SQL> @pgamvs.sql
The following message appears:
=> Congratulations, your gateway is communicating with APPC/MVS <=
The APPC/MVS installation verification is now complete.
If you chose to configure commit-confirm in Section 9.8, "Configuring Commit-Confirm", then the following section will assist you in verifying the configuration.
Note:
Refer to Chapter 5, "Implementing Commit-Confirm" in the Oracle Procedural Gateway for APPC User's Guide for Microsoft Windows for background information about the components and capabilities of commit-confirm.Samples are provided with the gateway for Transaction Server for z/OS and IMS/TM for implementing commit-confirm support. They are in the following directories, respectively: %ORACLE_HOME%\pg4appc\demo\CICS and %ORACLE_HOME%\pg4appc\demo\IMS. A README.doc file in each directory provides detailed information about installing and using the samples. JCL files for compiling and linking the sample programs are provided as well. The samples included with the gateway assist you with the following:
Creating and initializing the commit-confirm transaction log databases and defining those databases to the OLTP. For Transaction Server for z/OS, the sample uses a VSAM file for the log database. For IMS/TM, a SHISAM/VSAM database is used.
Using subroutines for receiving the Oracle Global Transaction ID from the gateway and logging it into the commit-confirm transaction log database. These subroutines are provided in the pgacclg.asm files. They can be used in the applications to reduce the complexity of the code changes to the programs.
For Transaction Server for z/OS, the subroutine provided is called using the EXEC CICS LINK interface. For IMS/TM, the subroutine provided is called using the standard CALL
statement or its equivalent in the application's programming language. Both these subroutines are written in 370 assembler to eliminate any interlanguage interface complexities and compiler dependencies.
Installing forget/recovery transactions in the OLTP. These are provided in the pgareco.asm files. Forget/recovery transactions must be accessible through APPC so that the gateway can call them to forget a transaction once it has been successfully committed, and to query a transaction's state during recovery processing. These transactions delete the entry for a particular Oracle Global Transaction ID from the OLTP commit-confirm transaction log database during forget processing, and query the entry for a particular Oracle Global Transaction ID from the OLTP commit-confirm transaction log database during recovery processing. For both Transaction Server for z/OS and IMS/TM, these transactions are written in 370 assembler.
Using the sample commit-confirm transaction log databases and subroutines. For Transaction Server for z/OS, a sample DB2 update transaction, DB2C
, is provided in the pgadb2c.cob file. This is a COBOL example that updates the DB2 sample EMP table. For IMS/TM, a sample DLI update transaction, PGAIMSU
, is provided in the pgaimsu.cob file. This is a COBOL example that updates the DLI sample PARTS database.
The following are optional steps that you can perform as necessary. Installation of the sample applications for your OLTP is recommended to help you to fully understand how the gateway works and how it interfaces with the OLTP.
The Oracle Procedural Gateway for APPC package contains sample PL/SQL procedures and OLTP transaction programs that demonstrate the capabilities of the gateway. Samples are provided for the following:
APPC/MVS
z/OS dataset information
CICS Transaction Server for z/OS
ADABAS inquiry
DB2 inquiry
DB2 multirow inquiry
DB2 update
VSAM inquiry
VSAM update
DLI inquiry
FEPI DB2 inquiry
FEPI VSAM inquiry
IDMS-DC
IDMS/R inquiry
IMS/TM
IMS inquiry using IVTNO and IVTNV sample transactions
IMS PARTS update (CPI-C)
Additional samples are added to the distribution media in later releases of the product. Wherever possible, the sample applications use the sample databases provided with the database products.
For this release, full documentation on installing and using the sample applications is available in the README.doc files in the following directories: