This chapter discusses advanced SQLJ language features for use in coding your application. For more basic topics, refer to Chapter 4, "Basic Language Features".
The following topics are discussed:
SQLJ supports the concept of connection contexts, allowing strongly typed connections for use with different sets of SQL entities. You can think of a connection context as being associated with a particular set of SQL entities, such as tables, views, and stored procedures. SQLJ lets you declare additional connection context classes so that you can use each class for connections that use a particular set of SQL entities. Different instances of a single connection context class are not required to use the same physical entities or connect to the same schema, but will at least use sets of entities with the same names and data types.
See Also:
"Connection Considerations" for an overview of connection basics, focusing on situations where you are using just a single set of SQL entities and a single connection context class.This section covers the following topics:
Implementation and Functionality of Connection Context Classes
Using the IMPLEMENTS Clause in Connection Context Declarations
If your application uses different sets of SQL entities, then you will typically want to declare and use one or more additional connection context classes, as discussed in "Overview of SQLJ Declarations". Each connection context class can be used for a particular set of interrelated SQL entities, meaning that all the connections you define using a particular connection context class will use tables, views, stored procedures, and so on, which have the same names and use the same data types.
An example of a set of SQL entities is the set of tables and stored procedures used by the Human Resources (HR) department. Perhaps they use the EMPLOYEES
and DEPARTMENTS
tables and the CHANGE_DEPT
and UPDATE_HEALTH_PLAN
stored procedures. Another set of SQL entities might be the set of tables and procedures used by the Payroll department, perhaps consisting of the EMPS
table (another table of employees, but different than the one used by HR) and the GIVE_RAISE
and CHANGE_WITHHOLDING
stored procedures.
The advantage in tailoring connection context classes to sets of SQL entities is in the degree of online semantics-checking that this allows. Online checking verifies that all the SQL entities appearing in SQLJ statements that use a given connection context class match SQL entities found in the exemplar schema used during translation. An exemplar schema is a database account that SQLJ connects to for online checking of all the SQLJ statements that use a particular connection context class. You provide exemplar schemas to the translator through the SQLJ command-line -user
, -password
, and -url
options. An exemplar schema may or may not be the same account your application will use at run time.
See Also:
"Connection Options"If you have SQLJ statements that use a broad and perhaps unrelated group of SQL entities, but you use only a single connection context class for these statements, then the exemplar schema you provide must be very general. It must contain all the tables, views, and stored procedures used throughout all the statements. Alternatively, if all the SQLJ statements using a given connection context class use a tight, presumably interrelated, set of SQL entities, then you can provide a more specific exemplar schema that allows more thorough and meaningful semantics-checking.
Notes:
Be aware that a connection context class declaration does not define a set of SQL entities to be used with the declared connection context class, and it is permissible to use the same connection context class for connections that use disparate and unrelated sets of entities. How you use your connection context classes is at your discretion. All that limits the SQL entities you can use with a particular connection context class are the set of entities available in the exemplar schema, if you use online semantics-checking during translation, and the set of entities available in the schema you connect to at run time, using instances of the connection context class.
If you use qualified SQL names in your application, such as SCOTT.EMP
, which specifies the schema where the entity resides, then the exemplar schema, if you use online checking, and run time schema must have permission to access resources by these fully qualified names.
It is possible to use a single connection context class, even for connections to databases from different vendors, as long as each schema you connect to has entities that are accessible by the same names and that use compatible data types.
Declaring a connection context class results in the SQLJ translator defining a class for you in the translator-generated code. In addition to any connection context classes that you declare, there is always the default connection context class:
sqlj.runtime.ref.DefaultContext
When you construct a connection context instance, specify a particular schema and a particular session and transaction in which SQL operations will execute. You typically accomplish this by specifying a user name, password, and database URL as input to the constructor of the connection context class. The connection context instance manages the set of SQL operations performed during the session.
In each SQLJ statement, you can specify a connection context instance to use. The following example shows basic declaration and use of a connection context class, MyContext
, to connect to two different schemas. For typical usage, assume these schemas include a set of SQL entities with common names and data types.
#sql context MyContext; ... MyContext mctx1 = new MyContext ("jdbc:oracle:thin:@localhost:1521/myservice", "scott", "tiger", false); MyContext mctx2 = new MyContext ("jdbc:oracle:thin@localhost:1521/myservice", "brian", "mypasswd", false);
Note that connection context class constructors specify a boolean auto-commit parameter. In addition, note that you can connect to the same schema with different connection context instances. In the preceding example, both mctx1
and mctx2
can specify scott/tiger
if desired. However, during run time, one connection context instance would not see changes to the database made from the other until the changes are committed. The only exception to this would be if both connection context instances were created from the same underlying Java Database Connectivity (JDBC) connection instance. One of the constructors of any connection context class takes a JDBC connection instance as input.
This section gives a detailed example of how to declare a connection context class, then define a database connection using an instance of the class.
A connection context class has constructors for opening a connection to a database schema that take any of the following input parameter sets (as with the DefaultContext
class):
URL (String
), user name (String
), password (String
), auto-commit (boolean
)
URL (String
), java.util.Properties
object, auto-commit (boolean
)
URL (String
fully specifying connection and including user name and password), auto-commit setting (boolean
)
JDBC connection object (Connection
)
SQLJ connection context object
Notes:
When using the constructor that takes a JDBC connection object, do not initialize the connection context instance with a null JDBC connection.
The auto-commit setting determines whether SQL operations are automatically committed. For more information, refer to "Basic Transaction Control".
If a connection context class is declared with a data source with
clause, then it incorporates a different set of constructors. Refer to "Standard Data Source Support" for more information.
Declaring the Connection Context Class
The following declaration creates a connection context class:
#sql context OrderEntryCtx <implements_clause> <with_clause>;
This results in the SQLJ translator generating a class that implements the sqlj.runtime.ConnectionContext
interface and extends some base class, probably an abstract class, that also implements the ConnectionContext
interface. This base class would be a feature of the particular SQLJ implementation you are using. The implements
clause and with
clause are optional, specifying additional interfaces to implement and variables to define and initialize, respectively.
The following is an example of what the SQLJ translator generates (with method implementations omitted):
class OrderEntryCtx implements sqlj.runtime.ConnectionContext extends ... { public OrderEntryCtx(String url, Properties info, boolean autocommit) throws SQLException {...} public OrderEntryCtx(String url, boolean autocommit) throws SQLException {...} public OrderEntryCtx(String url, String user, String password, boolean autocommit) throws SQLException {...} public OrderEntryCtx(Connection conn) throws SQLException {...} public OrderEntryCtx(ConnectionContext other) throws SQLException {...} public static OrderEntryCtx getDefaultContext() {...} public static void setDefaultContext(OrderEntryCtx ctx) {...} }
Creating a Connection Context Instance
Continuing the preceding example, instantiate the OrderEntryCtx
class with the following syntax:
OrderEntryCtx myOrderConn = new OrderEntryCtx (url, username, password, autocommit);
For example:
OrderEntryCtx myOrderConn = new OrderEntryCtx ("jdbc:oracle:thin:@localhost:1521/myservice", "scott", "tiger", true);
This is accomplished in the same way as instantiating the DefaultContext
class. All connection context classes, including DefaultContext
, have the same constructor signatures.
Notes:
You typically must register your JDBC driver prior to constructing a connection context instance. Refer to "Driver Selection and Registration for Run Time".
If a connection context class is declared with a data source with
clause, then it incorporates a different set of constructors. Refer to "Standard Data Source Support" for more information.
Specifying a Connection Context Instance for a SQLJ Clause
Recall that the basic SQLJ statement syntax is as follows:
#sql <[<conn><, ><exec>]> { SQL operation };
Specify the connection context instance inside square brackets following the #sql
token. For example, in the following SQLJ statement, the connection context instance is myOrderConn
from the previous example:
#sql [myOrderConn] { UPDATE TAB2 SET COL1 = :w WHERE :v < COL2 };
In this way, you can specify an instance of either the DefaultContext
class or any declared connection context class.
Closing a Connection Context Instance
It is advisable to close all connection context instances when you are done. Each connection context class includes a close()
method, as discussed for the DefaultContext
class in "Closing Connections".
In closing a connection context instance that shares the underlying connection with another connection instance, you might want to keep the underlying connection open.
See Also:
"Closing Shared Connections"The following is an example of a SQLJ application using multiple connection contexts. It implicitly uses an instance of the DefaultContext
class for one set of SQL entities and an instance of the declared DeptContext
connection context class for another set of SQL entities.
This example uses the static Oracle.connect()
method to establish a default connection, then constructs an additional connection by using the static Oracle.getConnection()
method to pass another DefaultContext
instance to the DeptContext
constructor. As previously mentioned, this is just one of several ways you can construct a SQLJ connection context instance.
import java.sql.SQLException; import oracle.sqlj.runtime.Oracle; // declare a new context class for obtaining departments #sql context DeptContext; #sql iterator Employees (String ename, int deptno); class MultiSchemaDemo { public static void main(String[] args) throws SQLException { // set the default connection to the URL, user, and password // specified in your connect.properties file Oracle.connect(MultiSchemaDemo.class, "connect.properties"); // create a context for querying department info using // a second connection DeptContext deptCtx = new DeptContext(Oracle.getConnection(MultiSchemaDemo.class, "connect.properties")); new MultiSchemaDemo().printEmployees(deptCtx); deptCtx.close(); } // performs a join on deptno field of two tables accessed from // different connections. void printEmployees(DeptContext deptCtx) throws SQLException { // obtain the employees from the default context Employees emps; #sql emps = { SELECT ename, deptno FROM emp }; // for each employee, obtain the department name // using the dept table connection context while (emps.next()) { String dname; int deptno = emps.deptno(); #sql [deptCtx] { SELECT dname INTO :dname FROM dept WHERE deptno = :deptno }; System.out.println("employee: " +emps.ename() + ", department: " + dname); } emps.close(); } }
This section discusses how SQLJ implements connection context classes, including the DefaultContext
class, and what noteworthy methods they contain. As mentioned earlier, the DefaultContext
class and all generated connection context classes implement the ConnectionContext
interface.
Note:
Extending connection context classes is not permitted in the SQLJ specification and is not supported by the Oracle SQLJ implementation.Each connection context class implements the sqlj.runtime.ConnectionContext
interface.
Basic methods specified by this interface include the following:
close(boolean CLOSE_CONNECTION/KEEP_CONNECTION)
: Releases all resources used in maintaining this connection and closes any open connected profiles. It may close the underlying JDBC connection, depending on whether CLOSE_CONNECTION
or KEEP_CONNECTION
is specified. These are static boolean constants of the ConnectionContext
interface.
See Also:
"Closing Shared Connections"getConnection()
: Returns the underlying JDBC connection object for this connection context instance.
getExecutionContext()
: Returns the default ExecutionContext
instance for this connection context instance.
See Also:
"Execution Contexts"Additional Connection Context Class Methods
In addition to the methods specified and defined in the ConnectionContext
interface, each connection context class defines the following methods:
YourCtxClass
getDefaultContext()
: This is a static method that returns the default connection context instance for a given connection context class.
setDefaultContext(
YourCtxClass
connctxinstance
)
: This is a static method that defines the given connection context instance as the default connection context instance for its class.
Although it is true that you can use an instance of only the DefaultContext
class as your default connection, it might still be useful to designate an instance of a declared connection context class as the default context for that class, using the setDefaultContext()
method. Then you could conveniently retrieve it using the getDefaultContext()
method of the particular class. This would enable you, for example, to specify a connection context instance for a SQLJ executable statement as follows:
#sql context MyContext; ... MyContext myctx1 = new MyContext(url, user, password, autocommit); ... MyContext.setDefaultContext(myctx1); ... #sql [MyContext.getDefaultContext()] { SQL operations }; ...
Additionally, each connection context class defines methods for control of SQLJ statement caching. The following are the static methods:
setDefaultStmtCacheSize(int)
int getDefaultStmtCacheSize()
The following are the instance methods:
setStmtCacheSize(int)
int getStmtCacheSize()
By default, statement caching is enabled.
There may be situations where it is useful to implement an interface in your connection context declarations. For example, you may want to define an interface that exposes just a subset of the functionality of a connection context class. More specifically, you may want a class that has the getConnection()
functionality, but does not have other functionality of a connection context class.
You can create an interface called HasConnection
, for example, that specifies a getConnection()
method, but does not specify other methods found in a connection context class. You can then declare a connection context class but expose only the getConnection()
functionality by assigning a connection context instance to a variable of the HasConnection
type, instead of to a variable that has the type of your declared connection context class.
Assuming HasConnection
is in the mypackage
package, the declaration will be as follows:
#sql public context MyContext implements mypackage.HasConnection;
You can then instantiate a connection instance as follows:
HasConnection myConn = new MyContext (url, username, password, autocommit);
For example:
HasConnection myConn = new MyContext ("jdbc:oracle:thin:@localhost:1521/myservice", "scott", "tiger", true);
A significant feature of SQLJ is strong typing of connections, with each connection context class typically used for operations on a particular set of interrelated SQL entities. This does not mean that all the connection instances of a single class use the same physical entities. Instead, they use entities that have the same properties, such as names and privileges associated with tables and views, data types of their rows, and names and definitions of stored procedures. This strong typing allows SQLJ semantics-checking to verify during translation that you are using your SQL operations correctly, with respect to your database connections.
To use online semantics-checking during translation, provide a sample schema, which includes an appropriate set of SQL entities, for each connection context class. These sample schemas are referred to as exemplar schemas. Provide exemplar schemas through an appropriate combination of the SQLJ -user
, -password
, and -url
options. Following are two examples, one for the DefaultContext
class and one for a declared connection context class, where the user, password, and URL are all specified through the -user option:
-user=scott/tiger@jdbc:oracle:oci:@ -user@MyContext=scott/tiger@jdbc:oracle:oci:@
During semantics-checking, the translator connects to the specified exemplar schema for a particular connection context class and accomplishes the following:
It examines each SQLJ statement in your code that specifies an instance of the connection context class and checks its SQL operations, such as what tables you access and what stored procedures you use.
It verifies that entities in the SQL operations match the set of entities existing in the exemplar schema.
It is your responsibility to pick an exemplar schema that represents the run-time schema in appropriate ways. For example, it must have tables, views, stored functions, and stored procedures with names and data types that match what are used in your SQL operations, and with privileges set appropriately.
If no appropriate exemplar schema is available during translation for one of your connection context classes, then it is not necessary to specify SQLJ translator options for that particular connection context class. In that case, SQLJ statements specifying connection objects of that connection context class are semantically checked only to the extent possible.
Note:
Remember that the exemplar schema you specify in your translator option settings does not specify the schema to be used at run time. The exemplar schema furnishes the translator only with a set of SQL entities to compare against the entities you use in your SQLJ executable statements.The JDBC 2.0 extended application programming interface (API) specifies the use of data sources and Java Naming and Directory Interface (JNDI) as a portable alternative to the DriverManager
mechanism for obtaining JDBC connections. It permits database connections to be established through a JNDI name lookup. This name is bound to a particular database and schema prior to program run time through a javax.sql.DataSource
object, typically installed through a graphical user interface (GUI) JavaBeans deployment tool. The name can be bound to different physical connections without any source code changes simply by rebinding the name in the directory service.
SQLJ uses the same mechanism to create connection context instances in a flexible and portable way. Data sources can also be implemented using a connection pool or distributed transaction service, as defined by the JDBC 2.0 extended API.
Associating a Connection Context with a Data Source
In SQLJ it is natural to associate a connection context class with a logical schema, in much the same way that a data source name serves as a symbolic name for a JDBC connection. Combine both concepts by adding the data source name to the connection context declaration. For example:
#sql context EmpCtx with (dataSource="jdbc/EmpDB");
Any connection context class that you declare with a dataSource
property provides additional constructors. To continue the EmpCtx
example, the following constructors are provided:
EmpCtx()
: Looks up the data source for jdbc/EmpDB
and then calls the getConnection()
method on the data source to obtain a connection.
EmpCtx(String user, String password)
: Looks up the data source for jdbc/EmpDB
and calls the getConnection(user,password)
method on the data source to obtain a connection.
EmpCtx(ConnectionContext ctx)
: Delegates to ctx
to obtain a connection.
Any connection context class declared with a dataSource
property also omits a number of DriverManager
-based constructors. Continuing the EmpCtx
example, the following constructors are omitted:
EmpCtx(Connection conn)
EmpCtx(String url, String user, String password, boolean autoCommit)
EmpCtx(String url, boolean autoCommit)
EmpCtx(String url, java.util.Properties info, boolean autoCommit)
EmpCtx(String url, boolean autoCommit)
Auto-Commit Mode for Data Source Connections
The constructors based on data source, unlike those base on DriverManager
, do not include an explicit auto-commit parameter. They always use the auto-commit mode defined by the data source.
Data sources are configured to have a default auto-commit mode depending on the deployment scenario. For example, data sources in the server and middle tier typically have auto-commit off. Those on the client may have it on. However, it is also possible to configure data sources with a specific auto-commit setting. This permits data sources to be configured for a particular application and deployment scenario. Contrast this with JDBC URLs that may specify only a single database/driver configuration.
Programs can verify and possibly override the current auto-commit setting with the JDBC connection that underlies their connection context instance.
Note:
Be aware of the following points related to the auto-commit status of the connections you establish:If you use the Oracle
class, then auto-commit is off unless you turn it on explicitly.
If you use DefaultContext
or a connection context class with DriverManager
-style constructors, then the auto-commit setting must always be specified explicitly.
If you use the data source mechanism, then the auto-commit setting is inherited from the underlying data source. In most environments, the data source object originates from JDBC and the auto-commit option is on. To avoid unexpected behavior, always check the auto-commit setting.
Associating a Data Source with the Default Context
If a SQLJ program accesses the default connection context, and the default context has not yet been set, then the SQLJ run time will use the SQLJ default data source to establish its connection. The SQLJ default data source is bound to the JNDI name, jdbc/defaultDataSource
.
This mechanism provides a portable means to define and install a default JDBC connection for the default SQLJ connection context.
Data Source Support Requirements
For your program to use data sources, you must supply the javax.sql.*
and javax.naming.*
packages and an InitialContext
provider in your Java environment. The latter is required to obtain the JNDI context in which the SQLJ run time can look up the data source object.
All SQLJ run time libraries provided by Oracle support data sources. However, if you use the runtime12ee
library you must have javax.sql.*
and javax.naming.*
in your classpath in order for the run time to load. By contrast, the other run time libraries use reflection to retrieve DataSource
objects.
The Oracle SQLJ implementation provides SQLJ-specific data source support in the runtime12ee
library. Currently, SQLJ-specific data sources can be used in client-side or middle-tier applications, but not inside the server.
SQLJ-specific data sources extend JDBC data source functionality with methods that return SQLJ connection context instances. This enables a SQLJ developer to manage connection contexts just as a JDBC developer manages connections. In general, each SQLJ-specific data source interface or class is based on a corresponding standard JDBC data source interface or Oracle data source class.
The sqlj.runtime.ConnectionContextFactory
interface acts as a base interface for SQLJ data source functionality. It is implemented by a set of more specialized Oracle data source interfaces that add support for features such as connection pooling, connection caching, or distributed transactions.
The ConnectionContextFactory
interface specifies the following methods to return SQLJ connection context instances:
DefaultContext getDefaultContext()
DefaultContext getDefaultContext(boolean autoCommit)
DefaultContext getDefaultContext(String user, String password)
DefaultContext getDefaultContext(String user, String password, boolean autoCommit)
ConnectionContext getContext(Class aContextClass)
ConnectionContext getContext(Class aContextClass, boolean autoCommit)
ConnectionContext getContext(Class aContextClass, String user, String password)
ConnectionContext getContext(Class aContextClass, String user, String password, boolean autoCommit)
The getDefaultContext
methods return a sqlj.runtime.ref.DefaultContext
instance for the SQLJ default context. The getContext()
methods return a sqlj.runtime.ConnectionContext
instance. Specifically, it returns an instance of a user-declared connection context class that is specified in the method call.
For both getDefaultContext()
and getContext()
, there are signatures that enable you to specify connection parameters for the JDBC connection that underlies the connection context instance: the auto-commit setting, user and password settings, or all three. If you do not specify the user and password, then they are obtained from the underlying data source that generates the connection. If you do not specify an auto-commit setting, then the default is false
unless it was explicitly set to true
for the underlying data source.
Each Oracle data source interface that implements ConnectionContextFactory
also implements a standard JDBC data source interface to specify methods for the appropriate functionality, such as for basic data sources, connection pooling data sources, or distributed transaction (XA) data sources. Oracle has implemented the SqljDataSource
, SqljConnectionPoolDataSource
, and SqljXADataSource
interfaces, located in the sqlj.runtime
package and specified as follows:
interface SqljDataSource extends javax.sql.DataSource, ConnectionContextFactory { }
interface SqljDataSource extends javax.sql.ConnectionPoolDataSource, ConnectionContextFactory { }
interface SqljXADataSource extends javax.sql.XADataSource, ConnectionContextFactory { }
Oracle provides SQLJ-specific counterparts for the following JDBC data source classes: OracleDataSource
, OracleConnectionPoolDataSource
, OracleXADataSource
, OracleConnectionCacheImpl
, OracleXAConnectionCacheImpl
, and OracleOCIConnectionPool
.
Oracle SQLJ-specific data source classes are located in two packages: oracle.sqlj.runtime
and oracle.sqlj.runtime.client
.
The oracle.sqlj.runtime
package includes the following:
class OracleSqljDataSource extends oracle.jdbc.pool.OracleDataSource implements ConnectionContextFactory
Note:
TheOracleSqljDataSource
class implements the java.io.Serializable
interface. It is therefore serializable and can be used in clustered environments, such as Oracle9i Application Server Containers for J2EE (OC4J).class OracleSqljConnectionPoolDataSource extends oracle.jdbc.pool.OracleConnectionPoolDataSource implements ConnectionContextFactory
abstract class OracleSqljXADataSource extends oracle.jdbc.xa.OracleXADataSource implements ConnectionContextFactory
class OracleSqljConnectionCacheImpl extends oracle.jdbc.pool.OracleConnectonCacheImpl implements ConnectionContextFactory
class OracleSqljXAConnectionCacheImpl extends oracle.jdbc.pool.OracleXAConnectonCacheImpl implements ConnectionContextFactory
class OracleSqljOCIConnectionPool extends oracle.jdbc.pool.OracleOCIConnectonPool implements ConnectionContextFactory
The oracle.sqlj.runtime.client
package includes the following:
class OracleSqljXADataSource extends oracle.jdbc.xa.client.OracleXADataSource implements ConnectionContextFactory
You can use these classes in place of the corresponding JDBC classes that they extend. They include the getDefaultContext()
and getContext()
methods. When you call these methods, the following steps take place for you:
A new logical JDBC connection is acquired from the present data source.
A connection context instance is created from the logical connection and returned.
Examples: Using SQLJ Data Sources
When used in middle-tier environments, SQLJ-specific data sources, like JDBC data sources, are bound to JNDI locations. You can do the binding explicitly, as in the following example:
//Initialize the data source SqljXADataSource sqljDS = new OracleSqljXADataSource(); sqljDS.setUser("scott"); sqljDS.setPassword("tiger"); sqljDS.setServerName("myserver"); sqljDS.setDatabaseName("ORCL"); sqljDS.setDataSourceName("jdbc/OracleSqljXADS"); //Bind the data source to JNDI Context ctx = new InitialContext(); ctx.bind("jdbc/OracleSqljXADS");
In a middle-tier OC4J environment, another alternative is to instantiate data sources and bind them to JNDI through settings in the j2ee/home/config/data-sources.xml
file. For example, the following <data-source>
element in that file creates an OracleSqljXADataSource
instance and binds it to the JNDI location, jdbc/OracleSqljXADS
:
<data-source class="oracle.sqlj.runtime.OracleSqljXADataSource" name="jdbc/OracleSqljXADS" location="jdbc/OracleSqljXADS" xa-location="jdbc/OracleSqljXADS/xa" username="scott" password="tiger" url="jdbc:oracle:thin:@myhost:1521/myservice" />
A SQLJ-specific data source bound to a JNDI location can be looked up and used in creating connection context instances. The following code segment uses information from the preceding <data-source>
element to create connection context instances, a DefaultContext
instance and an instance of a user-declared MyCtx
class, respectively:
sqlj.runtime.SqljDataSource sqljDS; InitialContext initCtx = new InitialContext(); sqljDS = (sqlj.runtime.SqljDataSource)initCtx.lookup("jdbc/OracleSqljXADS"); // getDefaultContext DefaultContext ctx = sqljDS.getDefaultContext(); // getContext /* Declare MyCtx connection context class. You could optionally use a "with" clause to specify any desired connection parameters not available through the underlying data source. */ #sql public static context MyCtx; MyCtx ctx = (MyCtx) sqljDS.getContext(MyCtx.class);
Oracle has implemented a set of JavaBeans for database connections from within Java Server Pages (JSP) pages. The original beans, ConnBean
and ConnCacheBean
in oracle.jsp.dbutil
, are documented in the Oracle Application Server Containers for J2EE JSP Tag Libraries and Utilities Reference.
The Oracle SQLJ implementation provides the following extensions of these JavaBeans in the runtime12ee
library for use in SQLJ JSP pages:
oracle.sqlj.runtime.SqljConnBean
oracle.sqlj.runtime.SqljConnCacheBean
ConnBean
and ConnCacheBean
include methods that return JDBC connection objects. SqljConnBean
and SqljConnCacheBean
extend this functionality to support a bean property called ContextClass
of type String
and to return SQLJ connection context instances.
Note:
TheSqljConnBean
class implements the java.io.Serializable
interface. It is therefore serializable and can be used in clustered environments, such as OC4J.SqljConnBean
and SqljConnCacheBean
provide the following methods:
void setContextClass(String contextClassName)
String getContextClass()
DefaultContext getDefaultContext()
ConnectionContext getContext()
The ContextClass
property specifies the name of a user-declared connection context class, if you are not using DefaultContext
. You can set this property through the setContextClass()
method.
To retrieve a connection context instance, use getDefaultContext()
or getContext()
, as appropriate. The former returns a sqlj.runtime.ref.DefaultContext
instance, and the latter returns a sqlj.runtime.ConnectionContext
instance, specifically, an instance of the class specified in the ContextClass
property (by default, DefaultContext
).
However, note that the getDefaultContext()
and getContext()
methods are implemented differently between SqljConnBean
and SqljConnCacheBean
.
Behavior of SqljConnBean (Simple Connections)
A SqljConnBean
instance can wrap only one logical JDBC connection and one SQLJ connection context instance at any given time.
The first getDefaultContext()
or getContext()
method call will create and return a connection context instance based on the underlying JDBC connection. This connection context instance will also be stored in the SqljConnBean
instance.
Once a connection context instance has been created and stored, the behavior of subsequent getDefaultContext()
or getContext()
calls will depend on the type of the stored connection context and, for getContext()
, on the connection context type specified in the ContextClass
property, as follows:
For subsequent getDefaultContext()
calls:
If the stored connection context instance is a DefaultContext
instance: The method will keep returning that instance.
If the stored connection context instance is not a DefaultContext
instance: The method will close the stored connection context instance and reuse the underlying JDBC connection to create and return a new connection context as a DefaultContext
instance (regardless of the previous connection context type). This becomes the new connection context instance stored in the SqljConnBean
instance.
For subsequent getContext()
calls:
If the stored connection context instance is of the same type as that specified by the ContextClass
property: The method will keep returning that instance.
If the stored connection context instance is not of the same type as that specified by ContextClass
: The method will close the stored connection context instance and reuse the underlying JDBC connection to create and return a new connection context instance, an instance of what is specified in ContextClass
. This becomes the new connection context instance stored in the SqljConnBean
instance.
Note:
WhenSqljConnBean
closes a connection context instance, it does so with the KEEP_CONNECTION
setting, leaving the underlying JDBC connection intact. Refer to "Closing Shared Connections" for related information.Behavior of SqljConnCacheBean (Connection Caching)
Unlike with SqljConnBean
, the SqljConnCacheBean
JavaBean creates and returns a new connection context instance, based on a new logical JDBC connection, for each invocation of getDefaultContext()
or getContext()
. The connection context type will be DefaultContext
for a getDefaultContext()
call or the type specified in the ContextClass
property for a getContext()
call.
SqljConnCacheBean
does not store the connection context instances it creates.
Example: SQLJ JSP Page Using SqljConnCacheBean
The following program, SQLJSelectInto.sqljsp
, demonstrates the use of SqljConnCacheBean
, its ContextClass
bean property, and its getContext()
method:
<%@ page language="sqlj" import="java.sql.*, oracle.sqlj.runtime.SqljConnCacheBean" %> <jsp:useBean id="cbean" class="oracle.sqlj.runtime.SqljConnCacheBean" scope="session"> <jsp:setProperty name="cbean" property="User" value="scott"/> <jsp:setProperty name="cbean" property="Password" value="tiger"/> <jsp:setProperty name="cbean" property="URL" value="jdbc:oracle:thin:@myhost:1521/myservice"/> <jsp:setProperty name="cbean" property="ContextClass" value="sqlj.runtime.ref.DefaultContext"/> </jsp:useBean> <HTML> <HEAD> <TITLE> The SQLJSelectInto JSP </TITLE> </HEAD> <BODY BGCOLOR=white> <% String empno = request.getParameter("empno"); if (empno != null) { %> <H3> Employee # <%=empno %> Details: </H3> <% String ename = null; double sal = 0.0; String hireDate = null; StringBuffer sb = new StringBuffer(); sqlj.runtime.ref.DefaultContext ctx=null; try { // Make the Connection ctx = (sqlj.runtime.ref.DefaultContext) cbean.getContext(); } catch (SQLException e) { } try { #sql [ctx] { SELECT ename, sal, TO_CHAR(hiredate, 'DD-MON-YYYY') INTO :ename, :sal, :hireDate FROM scott.emp WHERE UPPER(empno) = UPPER(:empno) }; sb.append("<BLOCKQUOTE><BIG><B><PRE>\n"); sb.append("Name : " + ename + "\n"); sb.append("Salary : " + sal + "\n"); sb.append("Date hired : " + hireDate); sb.append("</PRE></B></BIG></BLOCKQUOTE>"); } catch (java.sql.SQLException e) { sb.append("<P> SQL error: <PRE> " + e + " </PRE> </P>\n"); } finally { if (ctx!= null) ctx.close(); } %> <H3><%=sb.toString()%></H3> <%} %> <B>Enter an employee number:</B> <FORM METHOD=get> <INPUT TYPE="text" NAME="empno" SIZE=10> <INPUT TYPE="submit" VALUE="Ask Oracle"); </FORM> </BODY> </HTML>
Note:
This example uses theContextClass
property for illustrative purposes. However, be aware that DefaultContext
is the default value anyway and if you want to use DefaultContext
, then the value of ContextClass
is irrelevant, if you use getDefaultContext()
instead of getContext()
.An execution context is an instance of the sqlj.runtime.ExecutionContext
class and provides a context in which SQL operations are executed. An execution context instance is associated either implicitly or explicitly with each SQL operation in your SQLJ application.
The ExecutionContext
class contains methods for the following features:
Execution control operations modify the semantics of subsequent SQL operations.
Execution status operations describe the results of the most recent SQL operation.
Execution cancellation operations terminate the SQL operation that is currently executing.
Update-batching operations enable and disable update batching, set the batch limit, and get update counts.
Savepoint operations set a savepoint, roll back to a savepoint, and release a savepoint.
Closure operations close the execution context instance to avoid resource leakage.
Note:
There is only one execution context class, unlike connection context classes where you declare additional classes as desired. Every execution context is an instance of theExecutionContext
class. So while the term connection context usually refers to a class that you have declared, the term execution context always refers to an instance of the ExecutionContext
class. This document specifies connection context class, connection context instance, and execution context instance to avoid confusion.This section covers the following topics:
Each connection context instance implicitly has its own default execution context instance, which you can retrieve by using the getExecutionContext()
method of the connection context instance.
A single execution context instance will be sufficient for a connection context instance except in the following circumstances:
You are using multiple threads with a single connection context instance.
When using multithreading, each thread must have its own execution context instance.
You want to use different SQL execution control operations on different SQLJ statements that use the same connection context instance.
You want to retain different sets of SQL status information from multiple SQL operations that use the same connection context instance.
As you execute successive SQL operations that use the same execution context instance, the status information from each operation overwrites the status information from the previous operation.
Although execution context instances might appear to be associated with connection context instances (given that each connection context instance has a default execution context instance, and you can specify a connection context instance and an execution context instance together for a particular SQLJ statement), they actually operate independently. You can use different execution context instances in statements that use the same connection context instance, and vice versa.
For example, it is useful to use multiple execution context instances with a single connection context instance if you use multithreading, with a separate execution context instance for each thread. And you can use multiple connection context instances with a single explicit execution context instance if your program is single-threaded and you want the same set of SQL control parameters to apply to all the connection context instances.
See Also:
"Execution Context Methods"To use different execution context instances with a single connection context instance, you must create additional instances of the ExecutionContext
class and specify them appropriately with your SQLJ statements.
To use an execution context instance other than the default with a given connection context instance, you must construct another execution context instance. There are no input parameters for the ExectionContext
constructor. For example:
ExecutionContext myExecCtx = new ExecutionContext();
You can then specify this execution context instance for use with any particular SQLJ statement, much as you would specify a connection context instance. The general syntax is as follows:
#sql [<conn_context><, ><exec_context>] { SQL operation };
For example, if you also declare and instantiate a connection context class, MyConnCtxClass
, and create an instance, myConnCtx
, then you can use the following statement:
#sql [myConnCtx, myExecCtx] { DELETE FROM emp WHERE sal > 30000 };
You can subsequently use different execution context instances with myConnCtx
or different connection context instances with myExecCtx
.
You can optionally specify an execution context instance while using the default connection context instance, as follows:
#sql [myExecCtx] { DELETE FROM emp WHERE sal > 30000 };
Notes:
If you specify a connection context instance without an execution context instance, then the default execution context instance of that connection context instance is used.
If you specify an execution context instance without a connection context instance, then the execution context instance is used with the default connection context instance of your application.
If you specify no connection context instance and no execution context instance, then SQLJ uses the default connection and its default execution context instance.
ExecutionContext
methods are all synchronized
methods. Therefore, for ISO standard code generation, anytime a statement tries to use an execution context instance already in use, the second statement will be blocked until the first statement completes.
In a client application, this typically involves multithreading situations. A thread that tries to use an execution context instance currently in use by another thread will be blocked. To avoid such blockage, you must specify a separate execution context instance for each thread that you use.
See Also:
"Multithreading in SQLJ"The preceding discussion does not apply for default Oracle-specific code generation. For performance reasons, SQLJ performs no additional synchronization against ExecutionContext
instances for Oracle-specific generated code. Therefore, you are responsible for ensuring that the same execution context instance will not be used by more than one thread. If multiple threads use the same execution context, then your application, rather than blocking, will experience errors such as incorrect results or NullPointer
exceptions.
Another exception to the discussion is for recursion, which is encountered only in the server. Multiple SQLJ statements in the same thread are allowed to simultaneously use the same execution context instance if this situation results from recursive calls. An example of this is where a SQLJ stored procedure or function has a call to another SQLJ stored procedure or function. If both use the default execution context instance, as is typical, then the SQLJ statements in the second procedure will use this execution context while the SQLJ call statement from the first procedure is also still using it. This is allowed.
See Also:
"Recursive SQLJ Calls in the Server"The following sections list public methods of the ExecutionContext
class and provide an example:
Use the following methods of an execution context instance to obtain status information about the most recent SQL operation that completed using that instance:
SQLWarning getWarnings()
: Returns a java.sql.SQLWarning
object containing the first warning reported by the most recent SQL operation that completed using this execution context instance. Warnings are returned in a chain. Use the getWarnings()
method of the execution context instance to get the first warning, then use the getNextWarning()
method of each SQLWarning
object to get the next warning. The chain contains all warnings generated during the execution of the SQL operation.
int getUpdateCount()
: Except when update batching is enabled, this returns an int
value specifying the number of rows updated by the last SQL operation that completed using this execution context instance. Zero (0
) is returned if the last SQL operation was not a data manipulation language (DML) statement. The QUERY_COUNT
constant is returned, if the last SQL operation produced an iterator or result set. The EXCEPTION_COUNT
constant is returned, if the last SQL operation terminated before completing execution or if no operation has yet been attempted using this execution context instance.
For batch-enabled applications, the value returned by getUpdateCount()
would be one of several batch-related constant values: NEW_BATCH_COUNT
, ADD_BATCH_COUNT
, or EXEC_BATCH_COUNT
.
See Also:
"Execution Context Update Counts"Use the following methods of an execution context instance to control the operation of future SQL operations executed using that instance (operations that have not yet started):
int getMaxFieldSize()
: Returns an int
value specifying the maximum amount of data (in bytes) that would be returned from a SQL operation subsequently, using this execution context instance. This applies only to columns of the BINARY
, VARBINARY
, LONGVARBINARY
, CHAR
, VARCHAR
, or LONGVARCHAR
type.
By default this parameter is set to 0
, meaning there is no size limit.
setMaxFieldSize(int)
: Takes an int
value as input to modify the maximum field-size.
int getMaxRows()
: Returns an int
value specifying the maximum number of rows that can be contained by any SQLJ iterator or JDBC result set created using this execution context instance. If the limit is exceeded, then the excess rows are silently dropped without any error report or warning.
By default, this parameter is set to 0
, meaning there is no row limit.
setMaxRows(int)
: Takes an int
value as input to modify the maximum row value.
int getQueryTimeout()
: Returns an int
value specifying the timeout interval, in seconds, for any SQL operation that uses this execution context instance. If a SQL operation exceeds this limit, then a SQL exception is thrown.
By default, this parameter is set to 0
, meaning there is no query timeout limit.
setQueryTimeout(int)
: Takes an int
value as input to modify the query timeout limit.
int getFetchSize()
: Retrieves the number of rows that is the current fetch size for iterator objects generated from this ExecutionContext
object. If this ExecutionContext
object has not set a fetch size by calling setFetchSize()
, then the value returned is 0
. If this ExecutionContext
object has set a non negative fetch size by calling the method setFetchSize()
, then the return value is the fetch size specified on setFetchSize()
.
setFetchSize(int)
: Gives the SQLJ run time a hint as to the number of rows that should be fetched when more rows are needed. The number of rows specified affects only iterator objects created using this ExecutionContext
object. Specifying zero means that an implementation-dependent default value will be used for the fetch size.
int getFetchDirection()
: Retrieves the default direction for fetching data, for scrollable iterator objects that are generated from this ExecutionContext
object. If this ExecutionContext
object has not set a fetch direction by calling the method setFetchDirection()
, then the return value is FETCH_FORWARD
.
setFetchDirection(int)
: Gives the SQLJ run time a hint as to the direction in which rows of scrollable iterator objects are processed. The hint applies only to scrollable iterator objects that are created using this ExecutionContext
object. The default value is:
sqlj.runtime.ResultSetIterator.FETCH_FORWARD.
This method throws a SQLException
if the given direction is not one of FETCH_FORWARD
, FETCH_REVERSE
, or FETCH_UNKNOWN
(int
constants).
Use the following method to cancel SQL operations in a multithreading environment or to cancel a pending statement batch if update batching is enabled:
cancel()
: In a multithreading environment, use this method in one thread to cancel a SQL operation currently executing in another thread. It cancels the most recent operation that has started but not completed, using this execution context instance. This method has no effect if no statement is currently being executed using this execution context instance.
In a batch-enabled environment, use this to cancel a pending statement batch. The batch is emptied, and none of the statements in the batch are executed. After you cancel a batch, the next batchable statement encountered will be added to a new batch.
See Also:
"Canceling a Batch"Use the following methods to control update batching if you want your application to use that performance enhancement feature:
int[] executeBatch()
: Executes the pending statement batch, returning an array of int
update counts.
int getBatchLimit()
: Returns an int
value indicating the current batch limit. If there is a batch limit, then a pending batch is implicitly executed once it contains that number of statements.
By default, the batch limit is set to the ExecutionContext
static constant value UNLIMITED_BATCH
, meaning there is no batch limit.
See Also:
"Setting a Batch Limit"int[] getBatchUpdateCounts()
: Returns an array of int
update counts for the last batch executed. This method is useful in situations where the batch was executed implicitly.
See Also:
"Execution Context Update Counts"boolean isBatching()
: Returns a boolean value indicating whether update batching is enabled.
This does not indicate whether there is currently a pending batch, but you can use the getUpdateCount()
method to see whether a batch has been newly created, added to, or executed.
setBatching(boolean)
: Takes a boolean value to enable update batching.
Update batching is disabled by default.
setBatchLimit(int)
: Takes a positive, nonzero int
value as input to set the current batch limit. Two special values you can assign are UNLIMITED_BATCH
, which means there is no limit, and AUTO_BATCH
, which lets the SQLJ run time dynamically determine a batch limit.
See Also:
"Update Batching"The Oracle SQLJ implementation supports JDBC 3.0 savepoints. Savepoints are stored in the ExecutionContext
instance, and the following public methods exist to support the SQLJ savepoint statements:
Object oracleSetSavepoint(ConnectionContextImpl, String)
Register a savepoint and return the savepoint as an Object
instance. This method takes the connection context as an instance of the sqlj.runtime.ref.ConnectionContextImpl
class and a string that specifies the savepoint name.
The Oracle SQLJ implementation instantiates a savepoint as an instance of the oracle.jdbc.OracleSavepoint
class, which extends the java.sql.Savepoint
interface. The Savepoint
interface requires Java Development Kit (JDK) 1.4. Oracle uses an Object
instance for this method to avoid the JDK 1.4 requirement.
void oracleRollbackToSavepoint (ConnectionContextImpl, Object)
Roll back changes to the specified savepoint. This method takes the connection context as an instance of ConnectionContextImpl
and the savepoint as an Object
instance.
void oracleReleaseSavepoint(ConnectionContextImpl, Object)
Release the specified savepoint. This method takes the connection context as an instance of ConnectionContextImpl
and the savepoint as an Object
instance.
You will generally use SQLJ savepoint statements instead of using these methods directly.
The Oracle SQLJ implementation provides extended functionality with a close()
method for the ExecutionContext
class:
close()
: To avoid resource leakage, use this method if the following circumstances are all true:
You are using the Oracle-specific code generation.
You explicitly created and used the ExecutionContext
instance, instead of using the default instance available through the connection context instance.
You are not issuing SQLJ rollback or commit statements explicitly using the ExecutionContext
instance:
#sql [ec] { COMMIT }; #sql [ec] { ROLLBACK };
You are not calling executeBatch()
on the ExecutionContext
instance.
Under this set of circumstances, a batchable statement might remain open on the ExecutionContext
instance and over time you may run out of database cursors. To avoid this, use the close()
method as in the following example:
Execution Context ec = new ExecutionContext();
...
try {
...
#sql [ec] { SQL operation };
...
} finally { ec.close(); }
Note:
When an execution context instance is associated with a connection context instance, instead of being declared explicitly, then closing the connection context instance, with or without closing the underlying JDBC connection, will automatically close any statement remaining on the execution context instance.The following code demonstrates the use of some ExecutionContext
methods:
ExecutionContext execCtx = DefaultContext.getDefaultContext().getExecutionContext(); // Wait only 3 seconds for operations to complete execCtx.setQueryTimeout(3); // delete using execution context of default connection context #sql { DELETE FROM emp WHERE sal > 10000 }; System.out.println ("removed " + execCtx.getUpdateCount() + " employees");
Do not use multiple threads with a single execution context. If you do, and two SQLJ statements try to use the same execution context simultaneously, then the second statement will be blocked until the first statement completes. Furthermore, status information from the first operation will likely be overwritten before it can be retrieved.
Therefore, if you are using multiple threads with a single connection context instance, then you should take the following steps:
Instantiate a unique execution context instance for use with each thread.
Specify execution contexts with your #sql
statements so that each thread uses its own execution context.
If you are using a different connection context instance with each thread, then no instantiation and specification of execution context instances is necessary, because each connection context instance implicitly has its own default execution context instance.
Note:
For performance reasons, SQLJ performs no additional synchronization againstExecutionContext
instances for Oracle-specific generated code. Therefore, you are responsible for ensuring that the same execution context instance will not be used by more than one thread. If multiple threads use the same execution context, then your application, rather than blocking, will experience errors such as incorrect results or NullPointer
exceptions.This section discusses SQLJ support and requirements for multithreading and the relation between multithreading and execution context instances.
You can use SQLJ in writing multithreaded applications. However, any use of multithreading in your SQLJ application is subject to the limitations of your JDBC driver or proprietary database access vehicle. This includes any synchronization limitations.
You are required to use a different execution context instance for each thread. You can accomplish this in one of two ways:
Specify connection context instances for your SQLJ statements such that a different connection context instance is used for each thread. Each connection context instance automatically has its own default execution context instance.
If you are using the same connection context instance with multiple threads, then declare additional execution context instances and specify execution context instances for your SQLJ statements such that a different execution context instance is used for each thread.
If you are using one of the Oracle JDBC drivers, then multiple threads can use the same connection context instance, if desired, as long as different execution context instances are specified and there are no synchronization requirements directly visible to the user. However, note that data access is sequential. Only one thread is accessing data at any given time. Synchronization refers to the control flow of the various stages of the SQL operations executing through your threads. For example, each statement can bind input parameters, then execute, and then bind output parameters. With some JDBC drivers, special care must be taken not to intermingle these stages.
For ISO standard code generation, if a thread attempts to execute a SQL operation that uses an execution context that is in use by another operation, then the thread is blocked until the current operation completes. If an execution context were shared between threads, then the results of a SQL operation performed by one thread would be visible in the other thread. If both threads were executing SQL operations, then a race condition might occur. The results of an execution in one thread might be overwritten by the results of an execution in the other thread before the first thread had processed the original results. This is why multiple threads are not allowed to share an execution context instance.
Note:
The preceding paragraph does not apply if you use default Oracle-specific code generation. For performance reasons, SQLJ performs no additional synchronization againstExecutionContext
instances for Oracle-specific generated code. Therefore, you are responsible for ensuring that the same execution context instance will not be used by more than one thread. If multiple threads use the same execution context, then your application, rather than blocking, will experience errors such as incorrect results or NullPointer
exceptions.Multithreading: MultiThreadDemo.sqlj
The following is an example of a SQLJ application using multithreading. A ROLLBACK
operation is executed before closing the connection, so the data is not permanently altered.
import java.sql.SQLException; import java.util.Random; import sqlj.runtime.ExecutionContext; import oracle.sqlj.runtime.Oracle; /** Each instance of MultiThreadDemo is a thread that gives all employees a raise of some ammount when run. The main program creates two such instances and computes the net raise after both threads have completed. **/ class MultiThreadDemo extends Thread { double raise; static Random randomizer = new Random(); public static void main (String args[]) { try { // set the default connection to the URL, user, and password // specified in your connect.properties file Oracle.connect(MultiThreadDemo.class, "connect.properties"); double avgStart = calcAvgSal(); MultiThreadDemo t1 = new MultiThreadDemo(250.50); MultiThreadDemo t2 = new MultiThreadDemo(150.50); t1.start(); t2.start(); t1.join(); t2.join(); double avgEnd = calcAvgSal(); System.out.println("average salary change: " + (avgEnd - avgStart)); } catch (Exception e) { System.err.println("Error running the example: " + e); } try { #sql { ROLLBACK }; Oracle.close(); } catch (SQLException e) { } } static double calcAvgSal() throws SQLException { double avg; #sql { SELECT AVG(sal) INTO :avg FROM emp }; return avg; } MultiThreadDemo(double raise) { this.raise = raise; } public void run() { // Since all threads will be using the same default connection // context, each run uses an explicit execution context instance to // avoid conflict during execution try { delay(); ExecutionContext execCtx = new ExecutionContext(); #sql [execCtx] { UPDATE EMP SET sal = sal + :raise }; int updateCount = execCtx.getUpdateCount(); System.out.println("Gave raise of " + raise + " to " + updateCount + " employees"); } catch (SQLException e) { System.err.println("error updating employees: " + e); } } // delay is used to introduce some randomness into the execution order private void delay() { try { sleep((long)Math.abs(randomizer.nextInt()/10000000)); } catch (InterruptedException e) {} } }
This section discusses how iterator classes are implemented and what additional functionality is available beyond the essential methods. The following topics are covered:
Any named iterator class you declare will be generated by the SQLJ translator to implement the sqlj.runtime.NamedIterator
interface. Classes implementing the NamedIterator
interface have functionality that maps iterator columns to database columns by name, not by position.
Any positional iterator class you declare will be generated by the SQLJ translator to implement the sqlj.runtime.PositionedIterator
interface. Classes implementing the PositionedIterator
interface have functionality that maps iterator columns to database columns by position, not by name.
Both the NamedIterator
interface and the PositionedIterator
interface, and therefore all generated SQLJ iterator classes as well, implement or extend the sqlj.runtime.ResultSetIterator
interface.
The ResultSetIterator
interface specifies the following methods for all SQLJ iterators:
close()
: Closes the iterator.
ResultSet getResultSet()
: Extracts the underlying JDBC result set from the iterator.
boolean isClosed()
: Determines if the iterator has been closed.
boolean next()
: Moves to the next row of the iterator, returning true
if there is a valid next row to go to.
The PositionedIterator
interface adds the following method specification for positional iterators:
boolean endFetch()
: Determines if you have reached the last row of a positional iterator.
Use the next()
method to advance through the rows of a named iterator and accessor methods to retrieve the data. The SQLJ generation of a named iterator class defines an accessor method for each iterator column, where each method name is identical to the corresponding column name. For example, if you declare a name
column, then a name()
method will be generated.
Use a FETCH INTO
statement together with the endFetch()
method to advance through the rows of a positional iterator and retrieve the data. A FETCH INTO
statement implicitly calls the next()
method. Do not explicitly use the next()
method in a positional iterator unless you are using the special FETCH CURRENT
syntax. The FETCH INTO
statement also implicitly calls accessor methods that are named according to iterator column numbers. The SQLJ generation of a positional iterator class defines an accessor method for each iterator column, where each method name corresponds to the column position.
Use the close()
method to close any iterator once you are done with it. The getResultSet()
method is central to SQLJ-JDBC interoperability.
Note:
Alternatively, you can use aResultSetIterator
instance or a ScrollableResultSetIterator
instance directly as a weakly typed iterator. (ScrollableResultSetIterator
extends ResultSetIterator
.) This is convenient if you are interested only in converting it to a JDBC result set and you do not need named or positional iterator functionality. You can also access it through SQLJ FETCH CURRENT
syntax.There may be situations where it will be useful to implement an interface in your iterator declaration. For example, you may have an iterator class where you want to restrict access to one or more columns. A named iterator class generated by SQLJ has an accessor method for each column in the iterator. If you want to restrict access to certain columns, you can create an interface with only a subset of the accessor methods, then expose instances of the interface type to the user instead of exposing instances of the iterator class type.
For example, assume you are creating a named iterator of employee data, with columns ENAME
(employee name), EMPNO
(employee number), and SAL
(salary). Accomplish this as follows:
#sql iterator EmpIter (String ename, int empno, float sal);
This generates a class EmpIter
with ename()
, empno()
, and sal()
accessor methods.
Assume, though, that you want to prevent access to the SAL
column. You can create an EmpIterIntfc
interface that has ename()
and empno()
methods, but no sal()
method. Then you can use the following iterator declaration instead of the preceding declaration (presuming EmpIterIntfc
is in the mypackage
package):
#sql iterator EmpIter implements mypackage.EmpIterIntfc (String emame, int empno, float sal);
Then if you code your application so that users can access data only through EmpIterIntfc
instances, then they will not have access to the SAL
column.
SQLJ supports the ability to extend iterator classes. This feature can be very useful in allowing you to add functionality to your queries and query results.
The one key requirement of an iterator subclass is that you must supply a public constructor that takes an instance of sqlj.runtime.RTResultSet
as input. The SQLJ run time will call this constructor in assigning query results to an instance of your subclass. Beyond that, you provide functionality as you choose.
You can continue to use functionality of the original iterator class (the superclass of your subclass). For example, you can advance through query results by calling the super.next()
method.
You may have situations where you do not require the strongly typed functionality of a SQLJ iterator.
For such circumstances, you can directly use instances of the sqlj.runtime.ResultSetIterator
type to receive query data, so that you are not required to declare a named or positional iterator class. Alternatively, you can use the sqlj.runtime.ScrollableResultSetIterator
type, which extends ResultSetIterator
. This enables you to use SQLJ scrollable iterator functionality. In using a result set iterator instead of a strongly typed iterator, you are trading the strong type-checking of the SQLJ SELECT
operation for the convenience of not having to declare an iterator class.
The ResultSetIterator
interface underlies all named and positional iterator classes and specifies the getResultSet()
and close()
methods. If you want to use SQLJ to process a result set iterator instance, then use a ScrollableResultSetIterator
instance and the FETCH CURRENT
syntax.
If you want to use JDBC to process a result set iterator instance, you can use its getResultSet()
method and then process the underlying result set that you retrieve. If you process a result set iterator through its underlying result set, you should close the result set iterator, not the result set, when you are finished. Closing the result set iterator will also close the result set, but closing the result set will not close the result set iterator.
Note:
The Oracle SQLJ implementation supports result set iterators for use as host expressions and to represent cursors inFETCH
statements. This functionality was not supported prior to Oracle9i Database.The ISO standard for SQLJ supports scrollable iterators, with functionality being patterned after the JDBC 2.0 specification for scrollable JDBC result sets. The Oracle SQLJ implementation supports this functionality.
Declaring Scrollable Iterators
To characterize an iterator as scrollable, add the following clause to the iterator declaration:
implements sqlj.runtime.Scrollable
This instructs the SQLJ translator to generate an iterator that implements the Scrollable
interface. Following is an example of a declaration of a named, scrollable iterator:
#sql public static MyScrIter implements sqlj.runtime.Scrollable (String ename, int empno);
The code that the SQLJ translator generates for the MyScrIter
class will automatically support all the methods of the Scrollable
interface.
Scrollable Iterator Sensitivity
You can declare scrollable iterators, like scrollable result sets, to have sensitivity to changes to the underlying data. By default, scrollable iterators in the Oracle SQLJ implementation have a sensitivity
setting of INSENSITIVE
, meaning they do not detect any such changes in the underlying data. However, you can use a with
clause to alter this setting. The following example expands an earlier example to specify sensitivity:
#sql public static MyScrIter implements sqlj.runtime.Scrollable with (sensitivity=SENSITIVE) (String ename, int empno);
Note:
Theimplements
clause must precede the with
clause.The SQLJ standard also allows a setting of ASENSITIVE
, but in the Oracle implementation this is undefined. Setting sensitivity
to ASENSITIVE
results instead in the default setting, INSENSITIVE
, being used.
Given the preceding declaration, MyScrIter
instances will be sensitive to data changes, subject to factors such as the fetch size window.
See Also:
Oracle Database JDBC Developer's Guide and Reference for information about scrollable result setsThis section documents some key methods of the sqlj.runtime.Scrollable
interface.
You can provide hints about the fetch direction to scrollable iterators. The following methods are defined on scrollable iterators as well as on execution contexts. Use an ExecutionContext
instance to provide the default direction to be used in creation of scrollable iterators.
setFetchDirection(int)
: Gives the SQLJ run time a hint as to the direction in which rows are processed. The direction should be one of sqlj.runtime.ResultSetIterator.FETCH_FORWARD
, FETCH_REVERSE
, or FETCH_UNKNOWN
.
If you do not specify a value for the direction on the ExecutionContext
, then FETCH_FORWARD
will be used as a default.
int getFetchDirection()
: Retrieves the current direction for fetching rows of data (one of the integer constants described in the previous point).
There are also a number of scrollable iterator methods that will return information about the current position of the iterator object in the underlying result set. All these methods will return false
whenever the result set underlying the iterator contains no rows:
boolean isBeforeFirst()
: Indicates whether the iterator object is before the first row in the result set.
boolean isFirst()
: Indicates whether the iterator object is on the first row of the result set.
boolean isLast()
: Indicates whether the iterator object is on the last row of the result set. Note that calling the isLast()
method may be expensive, because the JDBC driver may have to fetch ahead one row to determine whether the current row is the last row in the result set.
boolean isAfterLast()
: Indicates whether the iterator object is after the last row in the result set.
Note:
Additional methods for navigation, also defined in theScrollable
interface, are available as well.Named iterators use navigation methods, defined in the Scrollable
interface, to move through the rows of a result set. As described earlier in this manual, non-scrollable iterators have only the following method for navigation:
boolean next()
: Moves the iterator object to the next row in the result set.
See Also:
"Using Named Iterators"Additional navigation methods are available for scrollable named iterators. These methods function similarly to the next()
method. In that they try to position the iterator on an actual row of the result set. They return true
if the iterator ends up on a valid row and false
if it does not. Additionally, if you attempt to position the iterator object before the first row or after the last row in the result set, this leaves the iterator object in the "before first" or "after last" position, respectively.
The following methods are supported:
boolean previous()
: Moves the iterator object to the previous row in the result set.
boolean first()
: Moves the iterator object to the first row in the result set.
boolean last()
: Moves the iterator object to the last row in the result set.
boolean absolute(int)
: Moves the iterator object to the given row number in the result set. The first row is row 1, the second is row 2, and so on. If the given row number is negative, then the iterator object moves to a row position relative to the end of the result set. For example, calling absolute(-1)
positions the iterator object on the last row, absolute(-2)
indicates the next-to-last row, and so on.
boolean relative(int)
: Moves the iterator object a relative number of rows, either positive or negative from the current position. Calling relative(0)
is valid, but does not change the iterator position.
void beforeFirst()
: Moves the iterator object to the front of the result set, before the first row. This has no effect if the result set contains no rows.
void afterLast()
: Moves the iterator object to the end of the result set, after the last row. This has no effect if the result set contains no rows.
Note:
ThebeforeFirst()
and afterLast()
methods return void
, because they never place the iterator object on an actual row of the result set.Scrollable Positional Iterators
General FETCH
syntax for positional iterators was described earlier, in "Using Positional Iterators". For example:
#sql { FETCH :iter INTO :x, :y, :z };
This is actually an abbreviated version of the following syntax:
#sql { FETCH NEXT FROM :iter INTO :x, :y, :z };
This suggests the pattern for alternatively moving to the previous, first, or last row in the result set. Unfortunately, JDBC 2.0, after which the movement methods were modeled, uses previous()
. The FETCH
syntax, which is patterned after SQL, employs PRIOR
. In case you forget this inconsistency, the Oracle Database 11g SQLJ translator will also accept FETCH PREVIOUS
.
The syntax are:
#sql { FETCH PRIOR FROM :iter INTO :x, :y, :z }; #sql { FETCH FIRST FROM :iter INTO :x, :y, :z }; #sql { FETCH LAST FROM :iter INTO :x, :y, :z };
There is also syntax to pass a numeric value for absolute or relative movements, to move to a particular (absolute) row, or to move forward or backward from the current position. The syntax are:
#sql { FETCH ABSOLUTE :n FROM :iter INTO :x, :y, :z }; #sql { FETCH RELATIVE :n FROM :iter INTO :x, :y, :z };
Note:
In all of the preceding cases, the iteratorendFetch()
method returns true
whenever the FETCH
fails to move to a valid row and retrieve values.Note that you must use a host expression to specify the movement. You cannot simply use a constant for the numeric value. Thus, instead of the following:
#sql { FETCH RELATIVE 0 FROM :iter INTO :x, :y, :z };
You must write the following:
#sql { FETCH RELATIVE :(0) FROM :iter INTO :x, :y, :z };
Incidentally, this command leaves the position of the iterator unchanged. If the iterator is on a valid row, then the command just populates the variables.
Note:
Alternatively, you can navigate through a scrollable positional iterator through a combination of the navigation methods and theFETCH CURRENT
syntax.FETCH CURRENT Syntax: from JDBC Result Sets to SQLJ Iterators
Consider a situation where you have an existing JDBC program that you want to rewrite in SQLJ with as little modification as possible.
Your JDBC result set will use only movement methods, such as next()
, previous()
, absolute()
, and so on. You can immediately model this in SQLJ through a named iterator. However, this also implies that all columns of the SQL result set must have a proper name. In practice, many columns of the result set, if not all, will require introduction of alias names. This is unacceptable if the query text is to remain untouched.
The alternative, to avoid change to the query source, is to define a positional iterator type for the result set. However, this approach forces changes to the control-flow logic of the program. Consider the following JDBC code sample:
ResultSet rs = ... // execute ...query...; while (rs.next()) { x := rs.getXxx(1); y:=rs.getXxx(2); ...process... }
This translates along the following lines to SQLJ:
MyIter iter; #sql iter = { ...query... }; while(true) { #sql { FETCH :iter INTO :x, :y }; if (iter.endFetch()) break; ...process... }
The transformations to the program logic will become even more difficult when considering arbitrary movements on scrollable iterators. Because positional iterators implement all the movement commands of named iterators, it is possible to exploit this and use RELATIVE :(0)
to populate variables from the iterator:
MyIter iter; #sql iter = { ...query... }; while (iter.next()) { #sql { FETCH RELATIVE :(0) FROM :iter INTO :x, :y }; ...process... }
Now, you can preserve both the original query and the original program logic. Unfortunately, there still is one drawback to this approach. The MyIter
iterator type must implement the Scrollable
interface, even if this property is not really needed. To address this, the Oracle SQLJ implementation supports the following syntax extension:
#sql { FETCH CURRENT FROM :iter INTO :x, :y, :z };
Given this syntax, you can rewrite the JDBC example in SQLJ for scrollable as well as non-scrollable iterators:
AnyIterator ai;
#sql ai = { ...query... };
while (ai.next()) {
#sql { FETCH CURRENT FROM :ai INTO :x, :y };
...process...
}
Scrollable Result Set Iterators
Support in the Oracle SQLJ implementation for weakly typed result set iterators includes a scrollable result set iterator type:
package sqlj.runtime; public interface ScrollableResultSetIterator extends ResultSetIterator implements Scrollable { }
Because this type extends sqlj.runtime.ResultSetIterator
, it supports the methods described in "Result Set Iterators".
Because it also implements the sqlj.runtime.Scrollable
interface, it supports the methods described in "The Scrollable Interface" and "Scrollable Named Iterators".
Furthermore, scrollable result set iterators support the FETCH CURRENT
syntax described in "FETCH CURRENT Syntax: from JDBC Result Sets to SQLJ Iterators".
Consider the following JDBC code:
Statement st = conn.createStatement("SELECT ename, empid FROM emp"); ResultSet rs = st.executeQuery(); while (rs.next()) { x = rs.getString(1); y = rs.getInt(2); } rs.close();
You can use a SQLJ result set iterator in writing equivalent code, as follows:
sqlj.runtime.ResultSetIterator rsi; #sql rsi = { SELECT ename, empid FROM emp }; while (rsi.next()) { #sql { FETCH CURRENT FROM :rsi INTO :x, :y }; } rsi.close();
To take advantage of scrollability features, you could also write the following code:
sqlj.runtime.ScrollableResultSetIterator srsi; #sql srsi = { SELECT ename, empid FROM emp }; srsi.afterLast(); while (srsi.previous()) { #sql { FETCH CURRENT FROM :srsi INTO :x, :y }; } srsi.close();
SQLJ supports the SQL SET TRANSACTION
statement to specify the access mode and isolation level of any given transaction. Standard SQLJ supports READ ONLY
and READ WRITE
access mode settings, but the Oracle JDBC implementation does not support READ ONLY
. However, you can set permissions to have the same effect. Supported settings for isolation level are SERIALIZABLE
, READ COMMITTED
, READ UNCOMMITTED
, and REPEATABLE READ
. However, the Oracle SQL implementation does not support READ UNCOMMITTED
or REPEATABLE READ
.
READ WRITE
is the default access mode in both standard SQL and the Oracle SQL implementation. READ COMMITTED
is the default isolation level in the Oracle SQL implementation. SERIALIZABLE
is the default in standard SQL.
The following sections provide details:
See Also:
"Basic Transaction Control"The SQLJ SET TRANSACTION
statement has the following syntax:
#sql { SET TRANSACTION <access_mode>, <ISOLATION LEVEL isolation_level> };
If you do not specify a connection context instance, then the statement applies to the default connection. If you use SET TRANSACTION
, then it must be the first statement in a transaction, preceding any DML statements. In other words, the first statement since your connection to the database or your most recent COMMIT
or ROLLBACK
.
In standard SQLJ, any access mode or isolation level you set will remain in effect across transactions until you explicitly reset it at the beginning of a subsequent transaction. In a standard SQLJ SET TRANSACTION
statement, you can optionally specify the isolation level first or only the access mode or only the isolation level. Following are some examples:
#sql { SET TRANSACTION READ WRITE }; #sql { SET TRANSACTION ISOLATION LEVEL SERIALIZABLE }; #sql { SET TRANSACTION READ WRITE, ISOLATION LEVEL SERIALIZABLE }; #sql { SET TRANSACTION ISOLATION LEVEL READ COMMITTED, READ WRITE };
You can also specify a particular connection context instance for a SET TRANSACTION
statement, as opposed to having it apply to the default connection:
#sql [myCtxt] { SET TRANSACTION ISOLATION LEVEL SERIALIZABLE };
Note that in SQLJ, both the access mode and the isolation level can be set in a single SET TRANSACTION
statement. This is not true in other Oracle SQL tools, such as Server Manager or SQL*Plus, where a single statement can set one or the other, but not both.
The READ WRITE
and READ ONLY
access mode settings, where supported, have the following functionality:
READ WRITE
(default): In a READ WRITE
transaction, the user is allowed to update the database. SELECT
, INSERT
, UPDATE
, and DELETE
are all legal.
READ ONLY
(also supported by the Oracle JDBC implementation): In a READ ONLY
transaction, the user is not allowed to update the database. SELECT
is legal, but INSERT
, UPDATE
, DELETE
, and SELECT FOR UPDATE
are not.
The READ COMMITTED
, SERIALIZABLE
, READ UNCOMMITTED
, and REPEATABLE READ
isolation level settings, where supported, have the following functionality:
READ UNCOMMITTED
: Dirty reads, nonrepeatable reads, and phantom reads are all allowed.
READ COMMITTED
(default for Oracle10g): Dirty reads are prevented, and nonrepeatable reads and phantom reads are allowed. If the transaction contains DML statements that require row locks held by other transactions, then any of the statements will block until the row lock it needs is released by the other transaction.
REPEATABLE READ
: Dirty reads and nonrepeatable reads are prevented, and phantom reads are allowed.
SERIALIZABLE
: Dirty reads, nonrepeatable reads, and phantom reads are all prevented. Any DML statements in the transaction cannot update any resource that might have had changes committed after the transaction began. Such DML statements will fail.
A dirty read occurs when transaction B accesses a row that was updated by transaction A, but transaction A later rolls back the updates. As a result, transaction B sees data that was never actually committed to the database.
A nonrepeatable read occurs when transaction A retrieves a row, transaction B subsequently updates the row, and transaction A later retrieves the same row again. Transaction A retrieves the same row twice but sees different data.
A phantom read occurs when transaction A retrieves a set of rows satisfying a given condition, transaction B subsequently inserts or updates a row such that the row now meets the condition in transaction A, and transaction A later repeats the conditional retrieval. Transaction A now sees an additional row. This row is referred to as a phantom.
You can think of the four isolation level settings being in a progression:
SERIALIZABLE > REPEATABLE READ > READ COMMITTED > READ UNCOMMITTED
If a desired setting is unavailable to you, such as REPEATABLE READ
or READ UNCOMMITTED
if you use Oracle Database 11g, use a greater setting (one further to the left) to ensure having at least the level of isolation that you want.
You can optionally access and set the access mode and isolation level of a transaction, using methods of the underlying JDBC connection instance of your connection context instance. SQLJ code using these JDBC methods is not portable, however.
Following are the Connection
class methods for access mode and isolation level settings:
abstract int getTransactionIsolation()
: Returns the current transaction isolation level as one of the following constant values:
TRANSACTION_NONE TRANSACTION_READ_COMMITTED TRANSACTION_SERIALIZABLE TRANSACTION_READ_UNCOMMITTED TRANSACTION_REPEATABLE_READ
abstract void setTransactionIsolation(int)
: Sets the transaction isolation level, taking as input one of the preceding constant values.
abstract boolean isReadOnly()
: Returns true
if the transaction is READ ONLY
. Returns false
if the transaction is READ WRITE
.
abstract void setReadOnly(boolean)
: Sets the transaction access mode to READ ONLY
if true
is input. Sets the access mode to READ WRITE
if false
is input.
SQLJ statements are typically used for static SQL operations. Oracle Database 11g has extensions to support dynamic SQL as well, but another alternative is to use JDBC code within your SQLJ application for dynamic operations, which would be more portable. And there might be additional scenarios where using JDBC code in your SQLJ application might be useful or even required. Because of this, SQLJ enables you to use SQLJ and JDBC statements concurrently and provides interoperability between SQLJ and JDBC constructs.
Two kinds of interactions between SQLJ and JDBC are particularly useful:
Between SQLJ connection contexts and JDBC connections
Between SQLJ iterators and JDBC result sets
This section covers the following topics:
SQLJ enables you to convert, in either direction, between SQLJ connection context instances and JDBC connection instances.
Note:
When converting between a SQLJ connection context and a JDBC connection, bear in mind that the two objects are sharing the same underlying physical connection.Converting from Connection Contexts to JDBC Connections
If you want to perform a JDBC operation through a database connection that you have established in SQLJ (for example, if your application calls a library routine that returns a JDBC connection object), then you must convert the SQLJ connection context instance to a JDBC connection instance.
Any connection context instance in a SQLJ application, whether an instance of the sqlj.runtime.ref.DefaultContext
class or of a declared connection context class, contains an underlying JDBC connection instance and a getConnection()
method that returns that JDBC connection instance. Use the JDBC connection instance to create JDBC statement objects if you want to use JDBC operations.
Following is an example of how to use the getConnection()
method.
import java.sql.*; ... DefaultContext ctx = new DefaultContext ("jdbc:oracle:thin:@localhost:1521/myservice", "scott", "tiger", true); ... (SQLJ operations through SQLJ ctx connection context instance) ... Connection conn = ctx.getConnection(); ... (JDBC operations through JDBC conn connection instance) ...
The connection context instance can be an instance of the DefaultContext
class or of any connection context class that you have declared.
To retrieve the underlying JDBC connection of your default SQLJ connection, you can use getConnection()
directly from a DefaultContext.getDefaultContext()
call, where getDefaultContext()
returns a DefaultContext
instance that you had previously initialized as your default connection and getConnection()
returns its underlying JDBC connection instance. In this case, because you do not have to use the DefaultContext
instance explicitly, you can also use the Oracle.connect()
method. This method implicitly creates the instance and makes it the default connection.
Following is an example:
import java.sql.*; ... Connection conn = Oracle.connect ("jdbc:oracle:thin:@localhost:1521/myservice", "scott", "tiger").getConnection(); ... (JDBC operations through JDBC conn connection instance) ...
Example: JDBC and SQLJ Connection Interoperability for Dynamic SQL
Following is a sample method that uses the underlying JDBC connection instance of the default SQLJ connection context instance to perform dynamic SQL operations in JDBC. The dynamic operations are performed using JDBC java.sql.Connection
, java.sql.PreparedStatement
, and java.sql.ResultSet
objects. Alternatively, you can use Oracle SQLJ extensions for dynamic SQL operations.
import java.sql.*; public static void projectsDue(boolean dueThisMonth) throws SQLException { // Get JDBC connection from previously initialized SQLJ DefaultContext. Connection conn = DefaultContext.getDefaultContext().getConnection(); String query = "SELECT name, start_date + duration " + "FROM projects WHERE start_date + duration >= sysdate"; if (dueThisMonth) query += " AND to_char(start_date + duration, 'fmMonth') " + " = to_char(sysdate, 'fmMonth') "; PreparedStatement pstmt = conn.prepareStatement(query); ResultSet rs = pstmt.executeQuery(); while (rs.next()) { System.out.println("Project: " + rs.getString(1) + " Deadline: " + rs.getDate(2)); } rs.close(); pstmt.close(); }
For a rework of this example using SQLJ dynamic SQL functionality with FETCH
functionality from a result set iterator, refer to Example 5: Dynamic SQL with FETCH from Result Set Iterator.
Converting from JDBC Connections to Connection Contexts
If you initiate a connection as a JDBC Connection
instance but later want to use it as a SQLJ connection context instance (for example, if you want to use it in a context expression to specify the connection to use for a SQLJ executable statement), you can convert the JDBC connection instance to a SQLJ connection context instance.
The DefaultContext
class and all declared connection context classes have a constructor that takes a JDBC connection instance as input and constructs a SQLJ connection context instance.
For example, presume you instantiated and defined the JDBC connection instance conn
and want to use the same connection for an instance of a declared SQLJ connection context class MyContext
. You can do this as follows:
... #sql context MyContext; ... MyContext myctx = new MyContext(conn); ...
A SQLJ connection context instance and the associated JDBC connection instance share the same underlying physical connection. As a result, the following is true:
When you get a JDBC connection instance from a SQLJ connection context instance (using the connection context getConnection()
method), the Connection
instance inherits the state of the connection context instance. Among other things, the Connection
instance will retain the auto-commit setting of the connection context instance.
When you construct a SQLJ connection context instance from a JDBC connection instance (using the connection context constructor that takes a connection instance as input), the connection context instance inherits the state of the Connection
instance. Among other things, the connection context instance will retain the auto-commit setting of the Connection
instance. By default, a JDBC connection instance has an auto-commit setting of true
, but you can alter this through the setAutoCommit()
method of the Connection
instance.
Given a SQLJ connection context instance and associated JDBC connection instance, calls to methods that alter session state in one instance will also affect the other instance, because it is actually the underlying shared session that is being altered.
Because there is just a single underlying physical connection, there is also a single underlying set of transactions. A COMMIT
or ROLLBACK
operation in one connection instance will affect any other connection instances that share the same underlying connection.
Note:
It is also possible for multiple SQLJ connection context instances to be created from the same JDBC connection instance and, therefore, to share the same underlying physical connection. This might be useful, for example, if you want to share the same set of transactions between program modules. The preceding notes apply to this situation as well.When you get a JDBC connection instance from a SQLJ connection context instance (using the getConnection()
method) or you create a SQLJ connection context instance from a JDBC connection instance (using the connection context constructor), you must close only the connection context instance. By default, calling the close()
method of a connection context instance closes the associated JDBC connection instance and the underlying physical connection, thereby freeing all resources associated with the connection.
If you want to close a SQLJ connection context instance without closing the associated JDBC connection instance (if, for example, the Connection
instance is being used elsewhere, either directly or by another connection context instance), then you can specify the boolean constant KEEP_CONNECTION
to the close()
method, as follows (assume a connection context instance ctx
):
ctx.close(ConnectionContext.KEEP_CONNECTION);
If you do not specify KEEP_CONNECTION
, then the associated JDBC connection instance is closed by default. You can also specify this explicitly:
ctx.close(ConnectionContext.CLOSE_CONNECTION);
KEEP_CONNECTION
and CLOSE_CONNECTION
are static constants of the sqlj.runtime.ConnectionContext
interface.
If you close only the JDBC connection instance, this will not close the associated SQLJ connection context instance. The underlying physical connection would be closed, but the resources of the connection context instance would not be freed until garbage collection.
Notes:
If the same underlying JDBC connection is shared by multiple connection context instances, then use KEEP_CONNECTION
when closing all but the last remaining open connection context instance.
An error message will be issued if you try to close a connection context instance whose underlying JDBC connection has already been closed, or if you try to close the underlying connection when it has already been closed. If you encounter this, then verify that the JDBC connection is not being closed independently by JDBC code and all preceding close()
calls on SQLJ connection context instances that use the underlying connection use the KEEP_CONNECTION
parameter.
SQLJ enables you to convert in either direction between SQLJ iterators and JDBC result sets. For situations where you are selecting data in a SQLJ statement but do not care about strongly typed iterator functionality, SQLJ also supports a weakly typed iterator, which you can convert to a JDBC result set.
Converting from Result Sets to Named or Positional Iterators
There are a number of situations where you might find yourself manipulating JDBC result sets. For example, another package might be implemented in JDBC and provide access to data only through result sets or might require ResultSetMetaData
information because it is a routine written generically for any type of result set. Or your SQLJ application might invoke a stored procedure that returns a JDBC result set.
If the dynamic result set has a known structure, it is typically desirable to manipulate it as an iterator to use the strongly typed paradigm that iterators offer.
In SQLJ, you can populate a named or positional iterator object by converting an existing JDBC result set object. This can be thought of as casting a result set to an iterator, and the syntax reflects this as follows:
#sql iter = { CAST :rs };
This binds the result set object, rs
, into the SQLJ executable statement, converts the result set, and populates the iterator, iter
, with the result set data.
Following is an example. Assume myEmpQuery()
is a static Java function in a class called RSClass
, with a predefined query that returns a JDBC result set object:
import java.sql.*;
...
#sql public iterator MyIterator (String ename, float sal);
...
ResultSet rs;
MyIterator iter;
...
rs = RSClass.myEmpQuery();
#sql iter = { CAST :rs };
...
(process iterator)
...
iter.close();
...
This example could have used a positional iterator instead of a named iterator. The functionality is identical.
The following rules apply when converting a JDBC result set to a SQLJ iterator and processing the data:
To convert to a positional iterator, the result set and iterator must have the same number of columns and the types must map correctly.
To convert to a named iterator, the result set must have at least as many columns as the iterator and all columns of the iterator must be matched by name and type. If the result set and iterator do not have the same number of columns, then the SQLJ translator will generate a warning unless you use the -warn=nostrict
option setting.
The result set being cast must implement the java.sql.ResultSet
interface. The class oracle.jdbc.OracleResultSet
implements this interface, as does any standard result set class.
The iterator receiving the cast must be an instance of an iterator class that was declared as public
.
Do not access data from the result set, either before or after the conversion. Access data from the iterator only.
When you are finished, close the iterator, not the result set. Closing the iterator will also close the result set, but closing the result set will not close the iterator. When interoperating with JDBC, always close the SQLJ entity.
Converting from Named or Positional Iterators to Result Sets
You might also encounter situations where you want to define a query using SQLJ but ultimately need a result set.
Note:
SQLJ offers more natural and concise syntax, but perhaps you want to do dynamic processing of the results, or perhaps you want to use an existing Java method that takes a result set as input.So that you can convert iterators to result sets, every SQLJ iterator class, whether named or positional, is generated with a getResultSet()
method. This method can be used to return the underlying JDBC result set object of an iterator object.
Following is an example showing use of the getResultSet()
method:
import java.sql.*;
#sql public iterator MyIterator (String ename, float sal);
...
MyIterator iter;
...
#sql iter = { SELECT * FROM emp };
ResultSet rs = iter.getResultSet();
...
(process result set)
...
iter.close();
...
The following rules apply when converting a SQLJ iterator to a JDBC result set and processing the data.
When writing iterator data to a result set, you should access data only through the result set. Do not attempt to directly access the iterator, either before or after the conversion.
When you finish, close the original iterator, not the result set. Closing the iterator will also close the result set, but closing the result set will not close the iterator. When interoperating with JDBC, always close the SQLJ entity.
Using and Converting Weakly Typed Iterators (ResultSetIterator)
You might have a situation similar to what is discussed in "Converting from Named or Positional Iterators to Result Sets", but where you do not require the strongly typed functionality of the iterator. All you might care about is being able to use SQLJ syntax for the query and then processing the data dynamically from a result set. For such circumstances, you can directly use the sqlj.runtime.ResultSetIterator
type to receive query data.
In using SQLJ statements and ResultSetIterator
functionality instead of using JDBC statements and standard result set functionality, you enable yourself to use the more concise SELECT
syntax of SQLJ.
Following is an example of how to use and convert a weakly typed result set iterator:
import sqlj.runtime.*;
import java.sql.*;
...
ResultSetIterator rsiter;
...
#sql rsiter = { SELECT * FROM table };
ResultSet rs = rsiter.getResultSet();
...
(process result set)
...
rsiter.close();
...
Note:
The Oracle SQLJ implementation permits navigation through a result set iterator using thenext()
method and FETCH CURRENT
syntax. Furthermore, for scrollable result set iterators, additional navigation methods are supported.The Oracle SQLJ implementation includes extensions to support dynamic SQL, operations that are not predefined and can change in real time. Dynamic SQL expressions embedded in SQLJ statements are referred to as meta bind expressions.
Note:
Using JDBC code is still an option for dynamic SQL in Oracle Database 11g and might be preferable if code portability is a concern, but SQLJ support for dynamic SQL permits use of SQLJ as a single, simplified API for data access.This section covers the following topics:
Meta bind expressions are used for dynamic SQL in SQLJ statements, where otherwise static SQL clauses would appear. A meta bind expression contains a Java identifier of String
type or a string-valued Java expression that is interpreted at run time. In addition, so that SQLJ can perform online semantics-checking, a meta bind expression can optionally include static SQL replacement code to be used for checking during translation.
Meta Bind Expressions: General Usage and Restrictions
You can use a meta bind expression in place of any of the following:
Table name
Column name in a SELECT
statement (without the column alias, if specified)
All or part of a WHERE
clause condition
Role, schema, catalog, or package name in a data definition language (DDL) or DML statement
SQL literal value or SQL expression
Be aware of the following restrictions on meta bind expressions, enforced to ensure that the SQLJ translator can properly determine the nature of the SQL operation and can perform syntactic analysis of the SQLJ statement as a whole:
A meta bind expression cannot be the first noncomment of the SQL operation within a SQLJ statement.
A meta bind expression cannot contain the INTO
token of a SQLJ SELECT INTO
statement and cannot expand to become the INTO
-list of a SELECT INTO
statement.
A meta bind expression cannot appear in any of the following kinds of SQL/SQLJ instructions or clauses: CALL
, VALUES
, PSM SET
, COMMIT
, ROLLBACK
, FETCH INTO
, or CAST
.
Meta Bind Expressions: Syntax and Behavior
Following is the general syntax for meta bind expressions:
:{ Java_bind_expression }
or:
:{ Java_bind_expression :: SQL_replacement_code }
Note that spaces are optional. There can be multiple meta bind expressions within the SQL instructions of a SQLJ statement.
A Java bind expression can be either of the following:
Java identifier of the String
type
Java expression that evaluates to a character string
Java bind expressions within meta bind expressions are subject to standard Java lexing rules and have syntax similar to that of SQLJ host expressions. However, unlike host expressions, Java bind expressions within meta bind expressions are not enclosed within parentheses. This is because, if there is SQL replacement code, then the ::
token acts as a separator between the Java bind expression and the SQL code. If there is no SQL replacement code, then the closing braces (}) acts as a terminator. In either case, there is no ambiguity.
Note:
There can be no mode specifiers,IN
, OUT
, or INOUT
, within a Java bind expression or between :
and {
of the meta bind expression.A SQL replacement code clause consists of a sequence of zero or more SQL tokens, with the following requirements and restrictions:
It is subject to SQL lexing rules.
Braces ({ }) must occur in matching pairs (with the exception of those that are part of a SQL comment, constant, or identifier).
There can be no SQLJ host expressions or nested meta bind expressions within the SQL instructions.
Note:
It is permissible for the SQL replacement code to be empty.Whenever there is SQL replacement code (even if only an empty string) in a meta bind expression, then the meta bind expression is replaced by the SQL code during translation. The purpose of SQL replacement code is to enable the SQLJ translator to perform online semantics-checking.
If any meta bind expression within a SQLJ statement has no SQL replacement code clause, then the SQLJ translator cannot perform online semantics-checking on the statement. It is only checked syntactically.
At run time, each meta bind expression is replaced by the evaluation of its Java bind expression. If a Java bind expression evaluates to null
, then the dynamic SQL statement as a whole becomes undefined.
This section provides examples of dynamic SQL usage in SQLJ code.
... int x = 10; int y = x + 10; int z = y + 10; String table = "new_Emp"; #sql { INSERT INTO :{table :: emp} VALUES (:x, :y, :z) }; ...
During translation, the SQL operation becomes:
INSERT INTO emp VALUES (10, 20, 30);
SQLJ can perform online semantics-checking against a schema that has an emp
table. Perhaps new_Emp
only exists in the run-time schema and is not created until the application executes.
During run time, the SQL operation becomes:
INSERT INTO new_Emp VALUES (10, 20, 30);
... String table = "new_Emp"; String query = "ename LIKE 'S%' AND sal>1000"; #sql myIter = { SELECT * FROM :{table :: emp2} WHERE :{query :: ename='SCOTT'} }; ...
During translation, the SQL operation becomes:
SELECT * FROM emp2 WHERE ename='SCOTT';
SQLJ can perform online semantics-checking against a schema that has an emp2
table.
During run time, the SQL operation becomes:
SELECT * FROM new_Emp WHERE ename LIKE 'S%' AND sal>1000;
... double raise = 1.12; String col = "comm"; String whereQuery = "WHERE "+col+" IS NOT null"; for (int i=0; i<5; i++) { #sql { UPDATE :{"emp"+i :: emp} SET :{col :: sal} = :{col :: sal} * :raise :{whereQuery ::} }; } ...
During translation, the SQL operation becomes:
UPDATE emp SET sal = sal * 1.12;
SQLJ can perform online semantics-checking against a schema that has an emp
table. There is no WHERE
clause during translation, because the SQL replacement code is empty.
During run time, the SQL operation is executed five times, becoming:
UPDATE emp0 SET comm = comm * 1.12 WHERE comm IS NOT null; UPDATE emp1 SET comm = comm * 1.12 WHERE comm IS NOT null; UPDATE emp2 SET comm = comm * 1.12 WHERE comm IS NOT null; UPDATE emp3 SET comm = comm * 1.12 WHERE comm IS NOT null; UPDATE emp4 SET comm = comm * 1.12 WHERE comm IS NOT null;
... double raise = 1.12; String col = "comm"; String whereQuery = "WHERE "+col+" IS NOT null"; for (int i=0; i<10; i++) { #sql { UPDATE :{"emp"+i} SET :{col :: sal} = :{col :: sal} * :raise :{whereQuery ::} }; } ...
The run-time behaviors of Example 3 and Example 4 are identical. However, a difference occurs during translation, where SQLJ cannot perform online semantics-checking for Example 4, because there is no SQL replacement code for the first meta bind expression, :{"emp"+i}
.
Example 5: Dynamic SQL with FETCH from Result Set Iterator
This example is a rework of "Example: JDBC and SQLJ Connection Interoperability for Dynamic SQL", using SQLJ statements instead of JDBC statements. This example also uses FETCH CURRENT
functionality from a result set iterator.
import java.sql.*; public static void projectsDue(boolean dueThisMonth) throws SQLException { ResultSetIterator rsi; String andClause = (dueThisMonth) ? " AND to_char(start_date + duration, 'fmMonth' ) " + " = to_char(sysdate, 'fmMonth') " : ""; #sql rsi = { SELECT name, start_date + duration FROM projects WHERE start_date + duration >= sysdate :{andClause :: } }; while (rsi.next()) { String name = null; java.sql.Date deadline = null; #sql { FETCH CURRENT FROM :rsi INTO :name, :deadline }; System.out.println("Project: " + name + "Deadline: " + deadline); } rsi.close(); }