This chapter contains reference and usage information for the spatial aggregate functions, which are listed in Table 201.
Table 201 Spatial Aggregate Functions
Method  Description 

Returns a geometry object that is the centroid ("center of gravity") of the specified geometry objects. 

Returns a geometry that concatenates the specified line or multiline geometries. 

Returns a geometry object that is the convex hull of the specified geometry objects. 

Returns an LRS geometry object that concatenates specified LRS geometry objects. 

Returns the minimum bounding rectangle of the specified geometries. 

Returns a geometry object that is the topological union (OR operation) of the specified geometry objects. 
See the usage information about spatial aggregate functions in Section 1.10.
Most of these aggregate functions accept a parameter of type SDOAGGRTYPE, which is described in Section 1.10.1.
Note:
Spatial aggregate functions are supported for twodimensional geometries only, except for SDO_AGGR_MBR, which is supported for both twodimensional and threedimensional geometries.SDO_AGGR_CENTROID(
AggregateGeometry SDOAGGRTYPE
) RETURN SDO_GEOMETRY;
Returns a geometry object that is the centroid ("center of gravity") of the specified geometry objects.
An object of type SDOAGGRTYPE (see Section 1.10.1) that specifies the geometry column and dimensional array.
The behavior of the function depends on whether the geometry objects are all polygons, all points, or a mixture of polygons and points:
If the geometry objects are all polygons, the centroid of all the objects is returned.
If the geometry objects are all points, the centroid of all the objects is returned.
If the geometry objects are a mixture of polygons and points (specifically, if they include at least one polygon and at least one point), any points are ignored, and the centroid of all the polygons is returned.
The result is weighted by the area of each polygon in the geometry objects. If the geometry objects are a mixture of polygons and points, the points are not used in the calculation of the centroid. If the geometry objects are all points, the points have equal weight.
See also the information about the SDO_GEOM.SDO_CENTROID function in Chapter 24.
The following example returns the centroid of the geometry objects in the COLA_MARKETS table. (The example uses the definitions and data from Section 2.1.)
SELECT SDO_AGGR_CENTROID(SDOAGGRTYPE(shape, 0.005)) FROM cola_markets; SDO_AGGR_CENTROID(SDOAGGRTYPE(SHAPE,0.005))(SDO_GTYPE, SDO_SRID, SDO_POINT  SDO_GEOMETRY(2001, NULL, SDO_POINT_TYPE(5.21295938, 5.00744233, NULL), NULL, NUL L)
SDO_AGGR_CONCAT_LINES(
geom SDO_GEOMETRY
) RETURN SDO_GEOMETRY;
Returns a geometry that concatenates the specified line or multiline geometries.
Geometry objects.
Each input geometry must be a twodimensional line or multiline geometry (that is, the SDO_GTYPE value must be 2002 or 2006). This function is not supported for LRS geometries. To perform an aggregate concatenation of LRS geometric segments, use the SDO_AGGR_LRS_CONCAT spatial aggregate function.
The input geometries must be line strings whose vertices are connected by straight line segments. Circular arcs and compound line strings are not supported.
If any input geometry is a multiline geometry, the elements of the geometry must be disjoint. If they are not disjoint, this function may return incorrect results.
The topological relationship between the geometries in each pair of geometries to be concatenated must be DISJOINT or TOUCH; and if the relationship is TOUCH, the geometries must intersect only at two end points.
You can use the SDO_UTIL.CONCAT_LINES function (described in Chapter 32) to concatenate two line or multiline geometries.
An exception is raised if any input geometries are not line or multiline geometries, or if not all input geometries are based on the same coordinate system.
The following example inserts two line geometries in the COLA_MARKETS table, and then returns the aggregate concatenation of these geometries. (The example uses the data definitions from Section 2.1.)
 First, insert two line geometries. INSERT INTO cola_markets VALUES(1001, 'line_1', SDO_GEOMETRY(2002, NULL, NULL, SDO_ELEM_INFO_ARRAY(1,2,1), SDO_ORDINATE_ARRAY(1,1, 5,1))); INSERT INTO cola_markets VALUES(1002, 'line_2', SDO_GEOMETRY(2002, NULL, NULL, SDO_ELEM_INFO_ARRAY(1,2,1), SDO_ORDINATE_ARRAY(5,1, 8,1)));  Perform aggregate concatenation of all line geometries in layer. SELECT SDO_AGGR_CONCAT_LINES(c.shape) FROM cola_markets c WHERE c.mkt_id > 1000; SDO_AGGR_CONCAT_LINES(C.SHAPE)(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM  SDO_GEOMETRY(2002, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY( 1, 1, 5, 1, 8, 1))
SDO_AGGR_CONVEXHULL(
AggregateGeometry SDOAGGRTYPE
) RETURN SDO_GEOMETRY;
Returns a geometry object that is the convex hull of the specified geometry objects.
An object of type SDOAGGRTYPE (see Section 1.10.1) that specifies the geometry column and dimensional array.
See also the information about the SDO_GEOM.SDO_CONVEXHULL function in Chapter 24.
The following example returns the convex hull of the geometry objects in the COLA_MARKETS table. (The example uses the definitions and data from Section 2.1.)
SELECT SDO_AGGR_CONVEXHULL(SDOAGGRTYPE(shape, 0.005)) FROM cola_markets; SDO_AGGR_CONVEXHULL(SDOAGGRTYPE(SHAPE,0.005))(SDO_GTYPE, SDO_SRID, SDO_POI  SDO_GEOMETRY(2003, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 1), SDO_ORDINATE_ARR AY(8, 1, 10, 7, 10, 11, 8, 11, 6, 11, 1, 7, 1, 1, 8, 1))
SDO_AGGR_LRS_CONCAT(
AggregateGeometry SDOAGGRTYPE
) RETURN SDO_GEOMETRY;
Returns an LRS geometry that concatenates specified LRS geometries.
An object of type SDOAGGRTYPE (see Section 1.10.1) that specifies the geometry column and dimensional array.
This function performs an aggregate concatenation of any number of LRS geometries. If you want to control the order in which the geometries are concatenated, you must use a subquery with the NO_MERGE optimizer hint and the ORDER BY clause. (See the examples.)
The direction of the resulting segment is the same as the direction of the first geometry in the concatenation.
A 3D format of this function (SDO_AGGR_LRS_CONCAT_3D) is available. For information about 3D formats of LRS functions, see Section 7.4.)
For information about the Spatial linear referencing system, see Chapter 7.
The following example adds an LRS geometry to the LRS_ROUTES table, and then performs two queries that concatenate the LRS geometries in the table. The first query does not control the order of concatenation, and the second query controls the order of concatenation. Notice the difference in direction of the two segments: the segment resulting from the second query has decreasing measure values because the first segment in the concatenation (Route0
) has decreasing measure values. (This example uses the definitions from the example in Section 7.7.)
 Add a segment with route_id less than 1 (here, zero). INSERT INTO lrs_routes VALUES( 0, 'Route0', SDO_GEOMETRY( 3302,  Line string; 3 dimensions (X,Y,M); 3rd is measure dimension. NULL, NULL, SDO_ELEM_INFO_ARRAY(1,2,1),  One line string, straight segments SDO_ORDINATE_ARRAY( 5,14,5,  Starting point  5 is measure from start. 10,14,0)  Ending point  0 measure (decreasing measure) ) ); 1 row created.  Concatenate all routes (no ordering specified). SELECT SDO_AGGR_LRS_CONCAT(SDOAGGRTYPE(route_geometry, 0.005)) FROM lrs_routes; SDO_AGGR_LRS_CONCAT(SDOAGGRTYPE(ROUTE_GEOMETRY,0.005))(SDO_GTYPE, SDO_SRID  SDO_GEOMETRY(3302, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY( 2, 2, 0, 2, 4, 2, 8, 4, 8, 12, 4, 12, 12, 10, 18, 8, 10, 22, 5, 14, 27, 10, 14, 32))  Aggregate concatenation using subquery for ordering. SELECT SDO_AGGR_LRS_CONCAT(SDOAGGRTYPE(route_geometry, 0.005)) FROM ( SELECT /*+ NO_MERGE */ route_geometry FROM lrs_routes ORDER BY route_id); SDO_AGGR_LRS_CONCAT(SDOAGGRTYPE(ROUTE_GEOMETRY,0.005))(SDO_GTYPE, SDO_SRID  SDO_GEOMETRY(3302, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY( 2, 2, 32, 2, 4, 30, 8, 4, 24, 12, 4, 20, 12, 10, 14, 8, 10, 10, 5, 14, 5, 10, 14 , 0))
SDO_AGGR_MBR(
geom SDO_GEOMETRY
) RETURN SDO_GEOMETRY;
Returns the minimum bounding rectangle (MBR) of the specified geometries, that is, a single rectangle that minimally encloses the geometries.
Geometry objects.
This function does not return an MBR geometry if a proper MBR cannot be constructed. Specifically:
If the input geometries are all null, the function returns a null geometry.
If all data in the input geometries is on a single point, the function returns the point.
If all data in the input geometries consists of points on a straight line, the function returns a twopoint line.
The SDO_TUNE.EXTENT_OF function, documented in Chapter 31, also returns the MBR of geometries. The SDO_TUNE.EXTENT_OF function has better performance than the SDO_AGGR_MBR function if the data is nongeodetic and if a spatial index is defined on the geometry column; however, the SDO_TUNE.EXTENT_OF function is limited to twodimensional geometries, whereas the SDO_AGGR_MBR function is not. In addition, the SDO_TUNE.EXTENT_OF function computes the extent for all geometries in a table; by contrast, the SDO_AGGR_MBR function can operate on subsets of rows.
The following example returns the minimum bounding rectangle of the geometry objects in the COLA_MARKETS table. (The example uses the definitions and data from Section 2.1.)
SELECT SDO_AGGR_MBR(shape) FROM cola_markets; SDO_AGGR_MBR(C.SHAPE)(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SD  SDO_GEOMETRY(2003, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 3), SDO_ORDINATE_ARR AY(1, 1, 10, 11))
SDO_AGGR_UNION(
AggregateGeometry SDOAGGRTYPE
) RETURN SDO_GEOMETRY;
Returns a geometry object that is the topological union (OR operation) of the specified geometry objects.
An object of type SDOAGGRTYPE (see Section 1.10.1) that specifies the geometry column and dimensional array.
Do not use SDO_AGGR_UNION to merge line string or multiline string geometries; instead, use the SDO_AGGR_CONCAT_LINES spatial aggregate function.
See also the information about the SDO_GEOM.SDO_UNION function in Chapter 24.
The following example returns the union of all geometries except cola_d
(in this case, cola_a
, cola_b
, and cola_c
). (The example uses the definitions and data from Section 2.1.)
SELECT SDO_AGGR_UNION( SDOAGGRTYPE(c.shape, 0.005)) FROM cola_markets c WHERE c.name <> 'cola_d'; SDO_AGGR_UNION(SDOAGGRTYPE(C.SHAPE,0.005))(SDO_GTYPE, SDO_SRID, SDO_POINT(  SDO_GEOMETRY(2007, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 2, 11, 1003, 1), SDO _ORDINATE_ARRAY(8, 11, 6, 9, 8, 7, 10, 9, 8, 11, 1, 7, 1, 1, 5, 1, 8, 1, 8, 6, 5 , 7, 1, 7))
See also the more complex SDO_AGGR_UNION example in Section C.4.