The following topics provide information about transporting data into a data warehouse:
A source system to a staging database or a data warehouse database
A staging database to a data warehouse
A data warehouse to a data mart
Transportation is often one of the simpler portions of the ETL process, and can be integrated with other portions of the process. For example, as shown in Chapter 12, "Extraction in Data Warehouses", distributed query technology provides a mechanism for both extracting and transporting data.
You have three basic choices for transporting data in warehouses:
The most common method for transporting data is by the transfer of flat files, using mechanisms such as FTP or other remote file system access protocols. Data is unloaded or exported from the source system into flat files using techniques discussed in Chapter 12, "Extraction in Data Warehouses", and is then transported to the target platform using FTP or similar mechanisms.
Because source systems and data warehouses often use different operating systems and database systems, using flat files is often the simplest way to exchange data between heterogeneous systems with minimal transformations. However, even when transporting data between homogeneous systems, flat files are often the most efficient and most easy-to-manage mechanism for data transfer.
Distributed queries, either with or without gateways, can be an effective mechanism for extracting data. These mechanisms also transport the data directly to the target systems, thus providing both extraction and transformation in a single step. Depending on the tolerable impact on time and system resources, these mechanisms can be well suited for both extraction and transformation.
As opposed to flat file transportation, the success or failure of the transportation is recognized immediately with the result of the distributed query or transaction. See Chapter 12, "Extraction in Data Warehouses" for further information.
Oracle transportable tablespaces are the fastest way for moving large volumes of data between two Oracle databases. Previous to the introduction of transportable tablespaces, the most scalable data transportation mechanisms relied on moving flat files containing raw data. These mechanisms required that data be unloaded or exported into files from the source database, Then, after transportation, these files were loaded or imported into the target database. Transportable tablespaces entirely bypass the unload and reload steps.
Using transportable tablespaces, Oracle data files (containing table data, indexes, and almost every other Oracle database object) can be directly transported from one database to another. Furthermore, like import and export, transportable tablespaces provide a mechanism for transporting metadata in addition to transporting data.
Transportable tablespaces have some limitations: source and target systems must be running Oracle8i (or higher), must use the same character set, and, prior to Oracle Database 10g, must run on the same operating system. For details on how to transport tablespace between operating systems, see Oracle Database Concepts.
The most common applications of transportable tablespaces in data warehouses are in moving data from a staging database to a data warehouse, or in moving data from a data warehouse to a data mart.
Suppose that you have a data warehouse containing sales data, and several data marts that are refreshed monthly. Also suppose that you are going to move one month of sales data from the data warehouse to the data mart.
The current month's data must be placed into a separate tablespace in order to be transported. In this example, you have a tablespace
ts_temp_sales, which will hold a copy of the current month's data. Using the
SELECT statement, the current month's data can be efficiently copied to this tablespace:
CREATE TABLE temp_jan_sales NOLOGGING TABLESPACE ts_temp_sales AS SELECT * FROM sales WHERE time_id BETWEEN '31-DEC-1999' AND '01-FEB-2000';
Following this operation, the tablespace
ts_temp_sales is set to read-only:
ALTER TABLESPACE ts_temp_sales READ ONLY;
A tablespace cannot be transported unless there are no active transactions modifying the tablespace. Setting the tablespace to read-only enforces this.
ts_temp_sales may be a tablespace that has been especially created to temporarily store data for use by the transportable tablespace features. Following "Copy the Datafiles and Export File to the Target System", this tablespace can be set to read/write, and, if desired, the table
temp_jan_sales can be dropped, or the tablespace can be re-used for other transportations or for other purposes.
In a given transportable tablespace operation, all of the objects in a given tablespace are transported. Although only one table is being transported in this example, the tablespace
ts_temp_sales could contain multiple tables. For example, perhaps the data mart is refreshed not only with the new month's worth of sales transactions, but also with a new copy of the customer table. Both of these tables could be transported in the same tablespace. Moreover, this tablespace could also contain other database objects such as indexes, which would also be transported.
Additionally, in a given transportable-tablespace operation, multiple tablespaces can be transported at the same time. This makes it easier to move very large volumes of data between databases. Note, however, that the transportable tablespace feature can only transport a set of tablespaces which contain a complete set of database objects without dependencies on other tablespaces. For example, an index cannot be transported without its table, nor can a partition be transported without the rest of the table. You can use the
DBMS_TTS package to check that a tablespace is transportable.
See Also:Oracle Database PL/SQL Packages and Types Reference for detailed information about the
In this step, we have copied the January sales data into a separate tablespace; however, in some cases, it may be possible to leverage the transportable tablespace feature without even moving data to a separate tablespace. If the sales table has been partitioned by month in the data warehouse and if each partition is in its own tablespace, then it may be possible to directly transport the tablespace containing the January data. Suppose the January partition,
sales_jan2000, is located in the tablespace
ts_sales_jan2000. Then the tablespace
ts_sales_jan2000 could potentially be transported, rather than creating a temporary copy of the January sales data in the
However, the same conditions must be satisfied in order to transport the tablespace
ts_sales_jan2000 as are required for the specially created tablespace. First, this tablespace must be set to
ONLY. Second, because a single partition of a partitioned table cannot be transported without the remainder of the partitioned table also being transported, it is necessary to exchange the January partition into a separate table (using the
TABLE statement) to transport the January data. The
EXCHANGE operation is very quick, but the January data will no longer be a part of the underlying
sales table, and thus may be unavailable to users until this data is exchanged back into the
sales table after the export of the metadata. The January data can be exchanged back into the
sales table after you complete step 3.
The Export utility is used to export the metadata describing the objects contained in the transported tablespace. For our example scenario, the Export command could be:
EXP TRANSPORT_TABLESPACE=y TABLESPACES=ts_temp_sales FILE=jan_sales.dmp
This operation will generate an export file,
jan_sales.dmp. The export file will be small, because it contains only metadata. In this case, the export file will contain information describing the table
temp_jan_sales, such as the column names, column datatype, and all other information that the target Oracle database will need in order to access the objects in
Copy the data files that make up
ts_temp_sales, as well as the export file
jan_sales.dmp to the data mart platform, using any transportation mechanism for flat files. Once the datafiles have been copied, the tablespace
ts_temp_sales can be set to
WRITE mode if desired.
Once the files have been copied to the data mart, the metadata should be imported into the data mart:
IMP TRANSPORT_TABLESPACE=y DATAFILES='/db/tempjan.f' TABLESPACES=ts_temp_sales FILE=jan_sales.dmp
At this point, the tablespace
ts_temp_sales and the table
temp_sales_jan are accessible in the data mart. You can incorporate this new data into the data mart's tables.
You can insert the data from the
temp_sales_jan table into the data mart's sales table in one of two ways:
INSERT /*+ APPEND */ INTO sales SELECT * FROM temp_sales_jan;
Following this operation, you can delete the
temp_sales_jan table (and even the entire
Alternatively, if the data mart's sales table is partitioned by month, then the new transported tablespace and the
temp_sales_jan table can become a permanent part of the data mart. The
temp_sales_jan table can become a partition of the data mart's sales table:
ALTER TABLE sales ADD PARTITION sales_00jan VALUES LESS THAN (TO_DATE('01-feb-2000','dd-mon-yyyy')); ALTER TABLE sales EXCHANGE PARTITION sales_00jan WITH TABLE temp_sales_jan INCLUDING INDEXES WITH VALIDATION;
The previous example illustrates a typical scenario for transporting data in a data warehouse. However, transportable tablespaces can be used for many other purposes. In a data warehousing environment, transportable tablespaces should be viewed as a utility (much like Import/Export or SQL*Loader), whose purpose is to move large volumes of data between Oracle databases. When used in conjunction with parallel data movement operations such as the
SELECT statements, transportable tablespaces provide an important mechanism for quickly transporting data for many purposes.