This appendix describes messages generated by the Provisioning Agent.
Note:
All Reconciliation Agent messages are prefixed withIDMP.Message: IDMP000I Pioneer Starting
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP001I Pioneer Input Parameters are OK
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP001E Pioneer Input Control File is Empty
Message-Type: Error
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP002I Pioneer Detects IDF-Build yyyymmddHHMM
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP003I Pioneer Detects TCPIP Jobname XXXXXXXX
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP004I Pioneer Detects TCPIP IP Address of
xxx.xxx.xxx.xxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP005I Pioneer Detects TCPIP IP PORT of xxxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP006I Pioneer Detects Debugging is ON/OFF
Message-Type: Informational
Action Required: None
Conditions: If Debug On
Output: Console, SYSOUT
Message: IDMP007I Pioneer Detects Audit log is <value>
Message-Type: Informational
Action Required: None
Conditions: If Debug On
Output: Console, SYSOUT
Message: IDMP008I Pioneer Detects KVER xxxxxxxxxxxxxxxx
Message-Type: Informational
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP009I Pioneer Detects Encryption Enabled
Message-Type: Informational
Action Required: None
Conditions: If ESIZE=16 (Encryption ON)
Output: Console, SYSOUT
Message: IDMP010I Pioneer Detects Encryption Disabled
Message-Type: Informational
Action Required: None
Conditions: If ESIZE NOT=16 (Encryption OFF)
Output: Console, SYSOUT
Message: IDMP011I Pioneer Detects CPUID xxxxxxxxxxxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP012I Pioneer Detects Sysplex Sysname xxxxxxxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP013I Pioneer Detects LPARNAME AS xxxxxxxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP014I Pioneer Detects Country Code of XX
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP015I Pioneer Detects Job Wait Time Of xx Secs
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP015I Pioneer Detects RECON wait time of xx Mins
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP020I Pioneer Accepting Messages on xxx.xxx.xxx.xxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP020A Pioneer Operator has Issued a Shutdown
Command
Message-Type: Action
Action Required: Action
Conditions: If Shut=Y
Output: Console, SYSOUT
Message: IDMP020A Pioneer has a Write Delay of <nnn> ms
Message-Type: Action
Action Required: Action
Conditions: If WRITE_DELAY=nnn
Output: Console, SYSOUT
Message: IDMP030I Pioneer INITAPI was successful
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP031I Pioneer GETCLIENTID was successful
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP032I Pioneer CLIENT NAME/ID is xxxxxxxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP033I Pioneer CLIENT TASK is xxxxxxxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP034I Pioneer CREATE SOCKET was successful
Message-Type: Informational
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP035I Pioneer BIND SOCKET was successful
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP036I Pioneer Listening Address is xxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP037I Pioneer Listening Address is xxx.xxx.xxx.xxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP038I Pioneer Listen Socket Call was successful
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP039I Pioneer Read Socket Call was successful
Message-Type: Informational
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP039I Pioneer Write Socket Call was successful
Message-Type: Informational
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP040I Pioneer Translation was successful from-to
xxxxxxxxxxxxxxxxxx. (ASCII-TO-EBCDIC) or
(EBCDIC-TO-ASCII)
Message-Type: Informational
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP040E Pioneer Translation was not successful from-to
xxxxxxxxxxxxxxxxxx.(ASCII-TO-EBCDIC) or
(EBCDIC-TO-ASCII)
Message-Type: Error
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP041I Pioneer Socket Accept was successful
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP041E Pioneer Socket Accept was not successful RC:
xxxxxxxx
Message-Type: Error
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP048I Pioneer LDAP Connection Timed out
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP049I Pioneer Has Been Idle for 30 Mins
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP050A Pioneer Closing IP Connection
Message-Type: Action
Action Required: Action
Conditions: If Shut=Y
Output: Console, SYSOUT
Message: IDMP051I Pioneer Close Socket Call was Successful
Message-Type: Informational
Action Required: None
Conditions: IF DEBUG ON
Output: SYSOUT
Message: IDMP051I Pioneer Close Socket Call was Successful
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP052I Pioneer Shutdown Socket Call was Successful
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP053I Pioneer MYRADMIN SAF call was Successful
Message-Type: Informational
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP054I Pioneer Received TOPS Recon Request from LDAP
Message-Type: Informational
Action Required: None
Conditions: IF Debug On
Output: Console, SYSOUT
Message: IDMP055I Pioneer Recon Processing Started
Message-Type: Informational
Action Required: None
Conditions: If Debug On
Output: Console, SYSOUT
Message: IDMP056I Pioneer Recon Processing Ended
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP057I Pioneer Recon Processing Successful
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: Console, SYSOUT
Message: IDMP058I Pioneer Recon Has Processed: xxxx Userids
Message-Type: Informational
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP058I Pioneer Recon Total Processed: xxxxxx Userids
Message-Type: Informational
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP070I Pioneer xxxxxxxx Is Now Open
Message-Type: Informational
Action Required: None
Conditions: If Debug On
Output: Console, SYSOUT
Message: IDMP071I Pioneer xxxxxxxx Is Now Closed
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: SYSOUT
Message: IDMP071A Pioneer has cleared the <filename> FILE
Message-Type: Action
Action Required: Action
Conditions: If Debug On
Output: SYSOUT
Message: IDMP070E Pioneer Could Not Open xxxxxxxx RC: xx
Message-Type: Error
Action Required: None
Conditions: Unconditional
Output: SYSOUT, Console
Message: IDMP070E Pioneer Could Not Open xxxxxxxx RC: xx
Message-Type: Error
Action Required: None
Conditions: If Debug On
Output: SYSOUT
Message: IDMP080I Pioneer Job Submitted to the Intrdr
Message-Type: Informational
Action Required: None
Conditions: If Debug On
Output: SYSOUT
Message: IDMP100I Pioneer (IN) Msgs Processed is xxxxxxxxxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: SYSOUT, Console
Message: IDMP100I Pioneer (OUT) Msgs Processed is xxxxxxxxxx
Message-Type: Informational
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP100I Pioneer Message (READ) Bytes xxxxxxxxxxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: SYSOUT, Console
Message: IDMP100I Pioneer Message (WRITE) Bytes xxxxxxxxxxx
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: SYSOUT, Console
Message: IDMP100I Pioneer Debug Log Files Created <LOGFILES>
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: SYSOUT, Console
Message: IDMP102I Pioneer Terminating
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: SYSOUT
Message: IDMP200E Pioneer Startup Parameter Error xxxxxxxxxxxxxx
Message-Type: Error
Action Required: None
Conditions: Unconditional
Output: SYSOUT
Message: IDMP200I *Pioneer Paramater = <value> Value = <value>
Message-Type: Informational
Action Required: Unconditional
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP201I Pioneer <Parmout> Status = Good
Message-Type: Informational
Action Required: Unconditional
Conditions: Unconditional
Output: SYSOUT
Message: IDMP300I *Debug* - xxxxxxxxxxxxxxxxxxxxxxxx
Message-Type: Action
Action Required: None
Conditions: If Debug On
Output: DEBUGOUT
Message: IDMP400I *Parms* - xxxxxxxxxxxxxxxxxxxxxxxx
Message-Type: Informational
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP041E *Parms* - "Message" "Status" "Text"
Message-Type: Error
Action Required: None
Conditions: Unconditional
Output: PARMOUT
Message: IDMP301I Pioneer Dynamically Allocated Sysout Ok
Message-Type: Informational
Action Required: None
Conditions: Not Utilized
Output: Not Utilized
Message: IDMP303I Pioneer Job Wait was modified by the operator to
nnn secs
Message-Type: Informational
Conditions: If JWAIT= value
Output: SYSOUT, Console
Message: IDMP304I Pioneer Recon Wait time was modified by the
operator to nnn secs
Message-Type: Informational
Action Required: None
Conditions: If RWAIT = value
Output: SYSOUT, Console
Message: IDMP305I Pioneer Debugging was Turned <status>
Message-Type: Error
Action Required: None
Conditions: If DEBG = Y/N
Output: SYSOUT, Console
Message: IDMP306I Pioneer Received Status Query and is Alive
Message-Type: Informational
Action Required: None
Conditions: If HERT= Y
Output: SYSOUT, Console
Message: IDMP500I *AUDIT* - <Func> <CMD> <ACID> <STAT>
<INFO>
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: AUDITLOG
Message: IDMP500I *HEADER* - <Func> <CMD> <ACID> <STAT>
<INFO>
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: AUDITLOG
Message: IDMP500I Generic
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: AUDITLOG
Message: IDMP620I *RADMIN* <value>
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: SYSOUT
Message: IDMP630I *CLISTI* <value>
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: SYSOUT
Message: IDMP600I *EXPMSG* <value>
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: EXPORTIN
Message: IDMP600I Pioneer waiting for the LDAP to respond Timeouts
= <value> times
Message-Type: Informational
Action Required: None
Conditions: Unconditional
Output: SYSOUT