After you deploy the connector, you must configure it to meet your requirements. This chapter discusses the following connector configuration procedures:
Note:
These sections provide both conceptual and procedural information about configuring the connector. It is recommended that you read the conceptual information before you perform the procedures.As mentioned earlier in this guide, reconciliation involves duplicating in Oracle Identity Manager the creation of and modifications to user accounts on the target system. This section discusses the following topics related to configuring reconciliation:
By default, all target system records that are added or modified after the last reconciliation run are reconciled during the current reconciliation run. You can customize this process by specifying the subset of added or modified target system records that must be reconciled. You do this by creating filters for the reconciliation module.
For this connector, you create a filter by specifying values for the CustomizedReconQuery IT resource parameter while configuring the IT resource. The procedure is described in earlier in this guide.
The following table lists the SAP CUA attributes, and the corresponding Oracle Identity Manager attributes, that you can use to build the query condition. You specify this query condition as the value of the CustomizedReconQuery parameter.
| Oracle Identity Manager Attribute | SAP CUA Attribute |
|---|---|
| User ID | userid |
| First Name | firstname |
| Last Name | lastname |
| Language | langcomm |
| User Type | usertype |
| Department | department |
| Functions | function |
| Country | country |
| User Group | usergroup |
| User Profile | userprofile |
| User Role | userrole |
The following are sample query conditions:
firstname=John&lastname=Doe
With this query condition, records of users whose first name is John and last name is Doe are reconciled.
firstname=John&lastname=Doe|usergroup=contractors
With this query condition, records of users who meet either of the following conditions are reconciled:
The user's first name is John or last name is Doe.
The user belongs to the contractors user group.
If you do not specify values for the CustomizedReconQuery parameter, then all the records in the target system are compared with existing Oracle Identity Manager records during reconciliation.
The following are guidelines to be followed while specifying a value for the CustomizedReconQuery parameter:
For the SAP CUA attributes, you must use the same case (uppercase or lowercase) as given in the table shown earlier in this section. This is because the attribute names are case-sensitive.
You must not include unnecessary blank spaces between operators and values in the query condition.
A query condition with spaces separating values and operators would yield different results as compared to a query condition that does not contain spaces between values and operators. For example, the output of the following query conditions would be different:
firstname=John&lastname=Doe
firstname= John&lastname= Doe
In the second query condition, the reconciliation engine would look for first name and last name values that contain a space at the start.
You must not include special characters other than the equal sign (=), ampersand (&), and vertical bar (|) in the query condition.
Note:
An exception is thrown if you include special characters other than the equal sign (=), ampersand (&), and vertical bar (|).You specify a value for the CustomizedReconQuery parameter while configuring the IT resource. The procedure is described later in this guide.
During a reconciliation run, all changes in the target system records are reconciled into Oracle Identity Manager. Depending on the number of records to be reconciled, this process may require a large amount of time. In addition, if the connection breaks during reconciliation, then the process would take longer to complete.
You can configure batched reconciliation to avoid such problems.
To configure batched reconciliation, you must specify values for the following user reconciliation scheduled task attributes:
StartRecord: Use this attribute to specify the record number from which batched reconciliation must begin.
BatchSize: Use this attribute to specify the number of records that must be included in each batch.
NumberOfBatches: Use this attribute to specify the total number of batches that must be reconciled. If you do not want to use batched reconciliation, specify All Available as the value of this attribute.
Note:
If you specifyAll Available as the value of this attribute, then the values of the StartRecord and BatchSize attributes are ignored.You specify values for these attributes by following the instructions described in the "Configuring the Reconciliation Scheduled Tasks" section.
After you configure batched reconciliation, if reconciliation fails during a batched reconciliation run, then refer to the log file for information about the batch at which reconciliation has failed.
While configuring the connector, the target system can be designated as a trusted source or target resource. If you designate the target system as a trusted source, then during a reconciliation run:
For each newly created user on the target system, an OIM User is created.
Updates made to each user on the target system are propagated to the corresponding OIM User.
If you designate the target system as a target resource, then during a reconciliation run:
For each account created on the target system, a resource is assigned to the corresponding OIM User.
Updates made to each account on the target system are propagated to the corresponding resource.
Note:
Skip this section if you do not want to designate the target system as a trusted source for reconciliation.Configuring trusted source reconciliation involves the following steps:
Import the XML file for trusted source reconciliation, SAPCUAXLResourceObject.xml, by using the Deployment Manager. This section describes the procedure to import the XML file.
Set the IsTrusted scheduled task attribute to true. You specify a value for this attribute while configuring the user reconciliation scheduled task, which is described later in this guide.
To import the XML file for trusted source reconciliation:
Open the Oracle Identity Manager Administrative and User Console.
Click the Deployment Management link on the left navigation bar.
Click the Import link under Deployment Management. A dialog box for opening files is displayed.
Locate and open the SAPCUAXLResourceObject.xml file, which is in the OIM_HOME/Xellerate/sapcua/xml directory. Details of this XML file are shown on the File Preview page.
Click Add File. The Substitutions page is displayed.
Click Next. The Confirmation page is displayed.
Click Import.
In the message that is displayed, click Import to confirm that you want to import the XML file and then click OK.
After you import the XML file for trusted source reconciliation, you must set the value of the IsTrusted reconciliation scheduled task attribute to true. This procedure is described in the "Configuring the Reconciliation Scheduled Tasks" section.
When you install the connector, the scheduled tasks for lookup fields and user reconciliations are automatically created in Oracle Identity Manager. To configure the scheduled task:
Expand the Xellerate Administration folder.
Select Task Scheduler.
Click Find. The details of the predefined scheduled tasks are displayed on two different tabs.
For the first scheduled task, enter a number in the Max Retries field. This number represents the number of times Oracle Identity Manager must attempt to complete the task before assigning the ERROR status to the task.
Ensure that the Disabled and Stop Execution check boxes are not selected.
In the Start region, double-click the Start Time field. From the date-time editor that is displayed, select the date and time at which you want the task to run.
In the Interval region, set the following schedule parameters:
To set the task to run on a recurring basis, select the Daily, Weekly, Recurring Intervals, Monthly, or Yearly option.
If you select the Recurring Intervals option, then you must also specify the time interval at which you want the task to run on a recurring basis.
To set the task to run only once, select the Once option.
Provide values for the attributes of the scheduled task. Refer to the "Specifying Values for the Scheduled Task Attributes" section for information about the values to be specified.
See Also:
Oracle Identity Manager Design Console Guide for information about adding and removing task attributesClick Save. The scheduled task is created. The INACTIVE status is displayed in the Status field, because the task is not currently running. The task is run at the date and time that you set in Step 7.
Repeat Steps 5 through 10 to create the second scheduled task.
After you create both scheduled tasks, proceed to the "Configuring Provisioning" section.
This section provides information about the values to be specified for the following scheduled tasks:
You must specify values for the following attributes of the SAPCUA Lookup Recon lookup fields reconciliation scheduled task.
Note:
Attribute values are predefined in the connector XML file that you import. Specify values only for those attributes that you want to change.
Values (either default or user-defined) must be assigned to all the attributes. If even a single attribute value were left empty, then reconciliation would not be performed.
| Attribute | Description | Sample Value |
|---|---|---|
ITResource |
Name of the IT resource for setting up the connection to the target system | SAP CUA |
Server |
Name of the server
This is an optional parameter. |
CUA |
After you specify values for these task attributes, proceed to Step 10 of the procedure to create scheduled tasks.
You must specify values for the following attributes of the SAPCUA User Recon user reconciliation scheduled task.
Note:
Attribute values are predefined in the connector XML file that you import. Specify values only for those attributes that you want to change.
Values (either default or user-defined) must be assigned to all the attributes. If even a single attribute value were left empty, then reconciliation would not be performed.
| Attribute | Description | Sample Value |
|---|---|---|
Organization |
Default organization assigned to a new user | Xellerate Users |
Role |
Default role assigned to a new user | Consultant |
Xellerate Type |
Default type assigned to a new user | End-user administrator |
ITResource |
Name of the IT resource for setting up the connection to SAP CUA | SAP CUA |
ResourceObject |
Name of the resource object into which users need to be reconciled | SAP CUA Resource Object |
Server |
Name of the server
This is an optional parameter. |
CUA |
IsTrusted |
Configuration for a trusted or nontrusted target
If it is set to |
false |
StartRecord |
The start record for the batching process
This attribute is also discussed in the "Batched Reconciliation" section. |
1 |
BatchSize |
The number of records that must be there in a batch
This attribute is also discussed in the "Batched Reconciliation" section. |
3 |
NumberOfBatches |
The number of batches that must be reconciled
This attribute is also discussed in the "Batched Reconciliation" section. |
Default value: All Available (for reconciling all the users)
Sample value: |
OIMServerTimeZone |
Time zone of the Oracle Identity Manager host computer
For example, enter |
Default value: GMT
Sample value: |
After you specify values for these task attributes, proceed to Step 10 of the procedure to create scheduled tasks.
As mentioned earlier in this guide, provisioning involves creating or modifying a user's account information on the target system through Oracle Identity Manager.
Note:
Skip this section if either of the following conditions is true:You performed the procedure described in "Installing the Connector".
You do not want to use the provisioning features of Oracle Identity Manager for this target system.
Adapters are used to implement provisioning functions. The following adapters are imported into Oracle Identity Manager when you import the connector XML file:
See Also:
The "Supported Functionality" section for a listing of the provisioning functions that are available with this connectorPrePopulate SAP Form
SAP CUA Delete User
SAP CUA Modify User
SAP CUA Add Role
SAP CUA Password Change
SAP CUA Create User
SAP CUA Lock UnLock User
SAP CUA Remove Role
SAP CUA Add Profile
SAP CUA Remove Profile
SAP CUA Modify UserX
You must compile these adapters before they can be used in provisioning operations.
To compile adapters by using the Adapter Manager form:
Open the Adapter Manager form.
To compile all the adapters that you import into the current database, select Compile All.
To compile multiple (but not all) adapters, select the adapters you want to compile. Then, select Compile Selected.
Note:
Click Compile Previously Failed to recompile only those adapters that were not compiled successfully. Such adapters do not have anOK compilation status.Click Start. Oracle Identity Manager compiles the selected adapters.
If Oracle Identity Manager is installed in a clustered environment, then copy the compiled adapters from the OIM_HOME/xellerate/Adapter directory to the same directory on each of the other nodes of the cluster. If required, overwrite the adapter files on the other nodes.
If you want to compile one adapter at a time, then use the Adapter Factory form.
See Also:
Oracle Identity Manager Tools Reference Guide for information about using the Adapter Factory and Adapter Manager formsTo view detailed information about an adapter:
Highlight the adapter in the Adapter Manager form.
Double-click the row header of the adapter, or right-click the adapter.
Select Launch Adapter from the shortcut menu that is displayed. Details of the adapter are displayed.
Note:
Perform this procedure only if you want to configure the connector for multiple installations of SAP CUA.You may want to configure the connector for multiple installations of SAP CUA. The following example illustrates this requirement:
The Tokyo, London, and New York offices of Acme Multinational Inc. have their own installations of SAP CUA. The company has recently installed Oracle Identity Manager, and they want to configure Oracle Identity Manager to link all the installations of SAP CUA.
To meet the requirement posed by such a scenario, you must configure the connector for multiple installations of SAP CUA.
To configure the connector for multiple installations of the target system:
See Also:
Oracle Identity Manager Design Console Guide for detailed instructions on performing each step of this procedureCreate and configure one resource object for each target system installation.
The Resource Objects form is in the Resource Management folder. The SAP CUA Resource Object resource object is created when you import the connector XML file. You can use this resource object as the template for creating the remaining resource objects.
Create and configure one IT resource for each resource object.
The IT Resources form is in the Resource Management folder. The SAP CUA IT resource is created when you import the connector XML file. You can use this IT resource as the template for creating the remaining IT resources, of the same resource type.
Design one process form for each process definition.
The Form Designer form is in the Development Tools folder. The following process forms are created when you import the connector XML file:
UD_SAPCUA (main form)
UD_SAPCUARL (child form for multivalue attributes)
UD_SAPCUAPR (child form for multivalue attributes)
You can use these process forms as templates for creating the remaining process forms.
Create and configure one process definition for each resource object.
The Process Definition form is in the Process Management folder. The SAP CUA Process process definition is created when you import the connector XML file. You can use this process definition as the template for creating the remaining process definitions.
While creating process definitions for each target system installation, the following steps that you must perform are specific to the creation of each process definition:
From the Object Name lookup field, select the resource object that you create in Step 1.
From the Table Name lookup field, select the process form that you create in Step 3.
While mapping the adapter variables for the IT Resource data type, ensure that you select the IT resource that you create in Step 2 from the Qualifier list.
Configure reconciliation for each target system installation. Refer to the "Configuring Reconciliation" section for instructions. Note that only the values of the following attributes are to be changed for each reconciliation scheduled task:
ITResource
ResourceObject
IsTrusted
Set the IsTrusted attribute to true for the SAP CUA installation that you want to designate as a trusted source.
If required, modify the fields to be reconciled for the Xellerate User resource object.
When you use the Administrative and User Console to perform provisioning, you can specify the IT resource corresponding to the SAP CUA installation to which you want to provision the user.