What's New in Oracle Identity Manager Connector for UNIX Telnet?

This chapter provides an overview of the updates made to the software and documentation for the UNIX Telnet connector in release 9.0.4.15.

Note:

Release 9.0.4.15 of the connector comes after release 9.0.4.12. Release numbers 9.0.4.13 and 9.0.4.14 have not been used.

The updates discussed in this chapter are divided into the following categories:

Software Updates

The following sections discuss software updates:

Software Updates in Release 9.0.4.2

The following are software updates in release 9.0.4.2:

Changes to the Testing Utility

In Chapter 5, "Testing and Troubleshooting," the following attributes have been added to the list of testing utility attributes:

The action attribute now supports additional parameters. The values can be any one of the following:

Enable User function Is supported on HP-UX Trusted Server

Corresponding changes have been made in the following sections:

Other Changes

The following are the other software changes made in this release:

Resolved Issues

The following table lists issues resolved from release 9.0.4.1 to this release of the connector:

Bug Number Issue Resolution

6375896

Target resource reconciliation threw exceptions when users were reconciled from Linux using a SUDO admin user.

Target resource reconciliation issues related to Linux used in the SUDO mode have been resolved.

6609731

The Supported Character Encoding and Target Locale IT resource parameters were not used by the connector.

The Supported Character Encoding and Target Locale IT resource parameters have been removed.

6642345

The connection retry feature of the connector was not working correctly.

Issues related to the connection retry feature have been resolved.

6680047

If a connection retry attempt was made, then previous sessions were not released and new sessions were established each time.

Connectivity issues related to session leakage have been resolved.

6728741

An incorrect response was received from the connector if the username value was greater than 8 characters and the Create Home directory check box was selected.

The responses received from the connector have been corrected.

6742869

A user could not be provisioned if there were spaces in value of the GECOS field.

Spaces are now allowed in the GECOS field.

6766705 and 6801405

The status of the resource object stayed at Provisioned even when provisioning tasks were rejected.

Issues related to the resource object status and response during provisioning have been resolved.

6786399

The connector was unable to handle responses from target systems running a non-English locale.

Responses from target systems running a non-English locale are now handled correctly.

6801537

During reconciliation, temporary files were created in the /etc directory.

During reconciliation, temporary files are now created in the /tmp folder.

6837471

A user could not be provisioned with spaces in the values of any of the user attributes.

Spaces are now allowed in many of the user attributes.

5180204

On AIX computers, the connector was not able to reconcile a large number of records.

Issues related to the reconciliation of a large number of users on AIX have been resolved.

5502324

Date format parsing errors were encountered during reconciliation.

The date format parsing error that was encountered during the user reconciliation has been resolved.

5503100

The message displayed when the user name had multibyte characters during a Create User provisioning operation was incorrect.

The message displayed when the user name has multibyte characters during a Create User provisioning operation has been modified.

5647992

On Linux, Solaris, and AIX computers, the Home Directory attribute could not be updated.

The Home Directory attribute is updated correctly on Linux, Solaris, and AIX targets.

5180227

The IT Resources contained two redundant parameters, Login Prompt and Password Prompt.

The Login Prompt and Password Prompt IT resource parameters have been deleted.

6604117

The Password and Confirm Password fields on the process form were not encrypted.

The Password and Confirm Password fields have been modified to accept encrypted values.

6310073

During provisioning, if user creation on the target system failed at some stage, then the user was not cleaned up from the target system although the status of the resource was Provisioning. When this happened, another user with the same name could not be provisioned.

During provisioning, if the user is not created properly on the target, then the user is deleted from the target system and the resource object status is set to Provisioning.


Software Updates in Release 9.0.4.3

The following updates have been made in release 9.0.4.3:

Software Updates in Release 9.0.4.4

The following is a software update in release 9.0.4.4:

Using the Connector Installer

From Oracle Identity Manager release 9.1.0 onward, the Administrative and User Console provides the Connector Installer feature. This feature can be used to automate the connector installation procedure.

See Section 2.4, "Installing the Connector on Oracle Identity Manager Release 9.1.0.1 or Release 11.1.1" for details.

Software Updates in Release 9.0.4.5

The following are software updates in release 9.0.4.5:

Changes in the IT Resource

In the IT resource, the Whether SUDO Admin Mode parameter has been renamed to Sudo Or RBAC.

See Chapter 2, "Deploying the Connector" for information about these parameters.

Resolved Issues in Release 9.0.4.5

The following table lists issues resolved in release 9.0.4.5:

Bug Number Issue Resolution

5503263

The "Create Home Directory" field is a check box on the Administrative and User Console. If you selected this check box, the numeral 1 was displayed on the page that summarizes input you provide during provisioning operations.

The check box has been changed to a radio button. If you select the "Create Home Directory" option, then the word "Yes" is displayed on the page that summarizes input. If you do not select the option, then the word "No" is displayed.

7172629

The Max Retries parameter of the IT resource was not used when the connection between Oracle Identity Manager and the target system failed.

If the connection fails, then the connector attempts to reestablish a connection up to the number of times specified by the Max Retries parameter.

7210292

The home directory of a Telnet account was not deleted when you revoked the account.

The home directory of a Telnet account is deleted when you revoke the account.

7225692

To stop a scheduled task, you use the Stop Execution option in the Design Console. This option did not work in earlier releases.

You can now use the Stop Execution option to stop scheduled tasks.

Note: When you stop a batched reconciliation run, reconciliation stops at the end of the current batch.

7237286

A Telnet account could not be provisioned on the Linux target system.

You can now provision Telnet accounts on the Linux target system.


Software Updates in Release 9.0.4.6

The following table lists issues resolved in release 9.0.4.6:

Bug Number Issue Resolution

7503701

The target system does not allow you to delete a user who is logged in to the system. This is expected behavior. However, even when the target system did not allow the deletion of a user, the status of the user (resource) on Oracle Identity Manager was changed to Deleted (Revoked).

This issue has been resolved. If the target system does not allow the deletion of a user, then an appropriate message is displayed as the outcome of the Delete User provisioning operation.

The item describing this issue has been removed from the Chapter 6, "Known Issues".


Software Updates in Release 9.0.4.7

The following are software updates in release 9.0.4.7:

Support for New Target System

From this release onward, the connector adds supports for Oracle Enterprise Linux 5.2 as a target system.

This target system version is mentioned in "Verifying Deployment Requirements" on page 2-1.

Resolved Issues

The following table lists issues resolved in release 9.0.4.7:

Bug Number Issue Resolution

7520249

During reconciliation, you could not transform values of the target system field before they were stored in Oracle Identity Manager.

This issue has been resolved. You can now transform the values of the target system fields before they are stored in Oracle Identity Manager.

See the "Transforming Data Reconciled Into Oracle Identity Manager" section for more information.

7563415

During reconciliation, the Group Name field was reconciled as a number and not as the exact name because it was stored directly as the group ID in the target system.

This issue has been resolved. During reconciliation, the exact name of the Group Name field is reconciled.

8396795

During connector deployment, the lib/xliTenet.jar file on the installation media was not automatically copied into the OIM_HOME/xellerate/ScheduleTask directory.

This issue has been resolved. The lib/xliTelnet.jar file is now automatically copied to the OIM_HOME/xellerate/ScheduleTask directory.


Software Updates in Release 9.0.4.11

The following table lists issues resolved in release 9.0.4.11:

Bug Number Issue Resolution

9100879

The Delete User provisioning operation did not work.

This issue has been resolved. The Delete User provisioning operation now works correctly.

9195323

The Create User provisioning operation failed when it was retried.

This issue has been resolved. The Create User provisioning operation can be retried.


Software Updates in Release 9.0.4.12

The following are the software updates in release 9.0.4.12:

Support for New Oracle Identity Manager Release

From this release onward, the connector can be installed and used on Oracle Identity Manager 11g release 1 (11.1.1). Where applicable, instructions specific to this Oracle Identity Manager release have been added in the guide.

See Section 1.1, "Certified Components" for the full list of certified Oracle Identity Manager releases.

Support for Request-Based Provisioning

From this release onward, the connector provides support for request-based provisioning on Oracle Identity Manager 11g release 1 (11.1.1).

See Section 3.6.2, "Request-Based Provisioning" for more information.

Support for New Target System

From this release onward, the connector adds support for IBM AIX 5L Version 6.1 as the target system.

See Section 1.1, "Certified Components" for the full list of certified target systems.

Support for User Account Status Reconciliation

From this release onward, the connector can reconcile user account status information from the target system.

Resolved Issues in Release 9.0.4.12

The following table lists issues resolved in release 9.0.4.12:

Bug Number Issue Resolution

7374688

Reconciliation of user records in the sudo mode failed because the connector attempted to run a shell.

This issue has been resolved.

9295029

When an update task failed, the status of the corresponding process task adapters changed from Provisioned to Provisioning.

This issue has been resolved. The status of the process task adapters do not change when the corresponding update task fails.

9611960

When performing a Create User provisioning operation on AIX, the group name must be specified as the value of the Primary Group Name lookup field. However, instead of displaying group names, the Primary Group Name lookup field displayed group IDs. The happened due to the following reason:

After performing lookup field synchronization by running the TelnetSSHGroupLookupReconTask scheduled task, the Code Key column of the UD_Lookup_SSH_PrimaryGroupNames lookup definition contained the group IDs, and the Decode column contained the group names.

This issue has been resolved. After you perform lookup field synchronization, the connector now reconciles group names into the Code Key column, and group IDs into the Decode column of the UD_Lookup_SSH_PrimaryGroupNames lookup definition. Therefore, for AIX and the other target systems, the connector passes the group name instead of the group ID.

9611211

The Confirm Password field on the process form required users to enter their passwords 2 times.

The Confirm Password field has been removed from the process form.


Software Updates in Release 9.0.4.15

The following are software updates implemented in release 9.0.4.15:

Support for New Target System

From this release onward, the connector adds support for HP-UX version 11iv3 (11.31) as the target system.

See Section 1.1, "Certified Components", for the full list of certified target systems.

Support for Importing Request Dataset XML Files

From this release onward, the connector provides support for importing a request dataset XML file into Oracle Identity Manager by using the Deployment Manager on Oracle Identity Manager 11g release 1 (11.1.1).

The installation media of this release includes a request dataset file, TelnetConnectorRequestDatasets.xml, which is available in the xml directory.

See Section 2.5.5.1, "Importing Request Datasets Using Deployment Manager" for more information.

Resolved Issues in Release 9.0.4.15

The following table describes issues resolved in release 9.0.4.15:

Bug Number Issue Resolution

11737066

When running the SSH User Target Resource Reconciliation Task, if the number of users to be reconciled is greater than the batch size, an exception is thrown.

This issue has been resolved. The reconciliation task runs successfully for multiple batches.

7498112

The connector did not support HP-UX11I V2,V3 as a target resource.

.This issue has been resolved. HP-UX11I V2,V3 is now supported as a target resource.


Documentation-Specific Updates

The following sections discuss documentation-specific updates:

Documentation-Specific Updates in Releases 9.0.4.1 Through 9.0.4.4

The following documentation-specific updates have been made in releases 9.0.4.1 through 9.0.4.4:

Documentation-Specific Updates in Release 9.0.4.5

The following are documentation-specific updates in release 9.0.4.5:

Documentation-Specific Updates in Release 9.0.4.6

At some places in this guide, corrections have been made to address some documentation issues.

Documentation-Specific Updates in Release 9.0.4.7

The following are documentation-specific updates in release 9.0.4.7:

Documentation-Specific Updates in Release 9.0.4.11

The following are documentation-specific updates in release 9.0.4.11:

See "Verifying Deployment Requirements" for the complete listing of certified components

Documentation-Specific Updates in Release 9.0.4.12

Major changes have been made to the structure of the guide. The objective of these changes is to synchronize the guide with the changes made to the connector and to improve the usability of the information provided by the guide.

Documentation-Specific Updates in Release 9.0.4.15

The following is documentation-specific updates in release 9.0.4.15: